mirror_zfs/module/os/linux/zfs/zvol_os.c

1124 lines
29 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
#include <sys/dataset_kstats.h>
#include <sys/dbuf.h>
#include <sys/dmu_traverse.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_dir.h>
#include <sys/zap.h>
#include <sys/zfeature.h>
#include <sys/zil_impl.h>
#include <sys/dmu_tx.h>
#include <sys/zio.h>
#include <sys/zfs_rlock.h>
#include <sys/spa_impl.h>
#include <sys/zvol.h>
#include <sys/zvol_impl.h>
#include <linux/blkdev_compat.h>
#include <linux/task_io_accounting_ops.h>
unsigned int zvol_major = ZVOL_MAJOR;
unsigned int zvol_request_sync = 0;
unsigned int zvol_prefetch_bytes = (128 * 1024);
unsigned long zvol_max_discard_blocks = 16384;
unsigned int zvol_threads = 32;
struct zvol_state_os {
struct gendisk *zvo_disk; /* generic disk */
struct request_queue *zvo_queue; /* request queue */
dataset_kstats_t zvo_kstat; /* zvol kstats */
dev_t zvo_dev; /* device id */
};
taskq_t *zvol_taskq;
static struct ida zvol_ida;
typedef struct zv_request {
zvol_state_t *zv;
struct bio *bio;
zfs_locked_range_t *lr;
} zv_request_t;
/*
* Given a path, return TRUE if path is a ZVOL.
*/
static boolean_t
zvol_is_zvol_impl(const char *device)
{
struct block_device *bdev;
unsigned int major;
bdev = vdev_lookup_bdev(device);
if (IS_ERR(bdev))
return (B_FALSE);
major = MAJOR(bdev->bd_dev);
bdput(bdev);
if (major == zvol_major)
return (B_TRUE);
return (B_FALSE);
}
static void
uio_from_bio(uio_t *uio, struct bio *bio)
{
uio->uio_bvec = &bio->bi_io_vec[BIO_BI_IDX(bio)];
uio->uio_iovcnt = bio->bi_vcnt - BIO_BI_IDX(bio);
uio->uio_loffset = BIO_BI_SECTOR(bio) << 9;
uio->uio_segflg = UIO_BVEC;
uio->uio_limit = MAXOFFSET_T;
uio->uio_resid = BIO_BI_SIZE(bio);
uio->uio_skip = BIO_BI_SKIP(bio);
}
static void
zvol_write(void *arg)
{
int error = 0;
zv_request_t *zvr = arg;
struct bio *bio = zvr->bio;
uio_t uio = { { 0 }, 0 };
uio_from_bio(&uio, bio);
zvol_state_t *zv = zvr->zv;
ASSERT(zv && zv->zv_open_count > 0);
ASSERT(zv->zv_zilog != NULL);
ssize_t start_resid = uio.uio_resid;
unsigned long start_jif = jiffies;
blk_generic_start_io_acct(zv->zv_zso->zvo_queue, WRITE,
bio_sectors(bio), &zv->zv_zso->zvo_disk->part0);
boolean_t sync =
bio_is_fua(bio) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
uint64_t volsize = zv->zv_volsize;
while (uio.uio_resid > 0 && uio.uio_loffset < volsize) {
uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1);
uint64_t off = uio.uio_loffset;
dmu_tx_t *tx = dmu_tx_create(zv->zv_objset);
if (bytes > volsize - off) /* don't write past the end */
bytes = volsize - off;
dmu_tx_hold_write(tx, ZVOL_OBJ, off, bytes);
/* This will only fail for ENOSPC */
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
break;
}
error = dmu_write_uio_dnode(zv->zv_dn, &uio, bytes, tx);
if (error == 0) {
zvol_log_write(zv, tx, off, bytes, sync);
}
dmu_tx_commit(tx);
if (error)
break;
}
zfs_rangelock_exit(zvr->lr);
int64_t nwritten = start_resid - uio.uio_resid;
dataset_kstats_update_write_kstats(&zv->zv_zso->zvo_kstat, nwritten);
task_io_account_write(nwritten);
if (sync)
zil_commit(zv->zv_zilog, ZVOL_OBJ);
rw_exit(&zv->zv_suspend_lock);
blk_generic_end_io_acct(zv->zv_zso->zvo_queue,
WRITE, &zv->zv_zso->zvo_disk->part0, start_jif);
BIO_END_IO(bio, -error);
kmem_free(zvr, sizeof (zv_request_t));
}
static void
zvol_discard(void *arg)
{
zv_request_t *zvr = arg;
struct bio *bio = zvr->bio;
zvol_state_t *zv = zvr->zv;
uint64_t start = BIO_BI_SECTOR(bio) << 9;
uint64_t size = BIO_BI_SIZE(bio);
uint64_t end = start + size;
boolean_t sync;
int error = 0;
dmu_tx_t *tx;
unsigned long start_jif;
ASSERT(zv && zv->zv_open_count > 0);
ASSERT(zv->zv_zilog != NULL);
start_jif = jiffies;
blk_generic_start_io_acct(zv->zv_zso->zvo_queue, WRITE,
bio_sectors(bio), &zv->zv_zso->zvo_disk->part0);
sync = bio_is_fua(bio) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
if (end > zv->zv_volsize) {
error = SET_ERROR(EIO);
goto unlock;
}
/*
* Align the request to volume block boundaries when a secure erase is
* not required. This will prevent dnode_free_range() from zeroing out
* the unaligned parts which is slow (read-modify-write) and useless
* since we are not freeing any space by doing so.
*/
if (!bio_is_secure_erase(bio)) {
start = P2ROUNDUP(start, zv->zv_volblocksize);
end = P2ALIGN(end, zv->zv_volblocksize);
size = end - start;
}
if (start >= end)
goto unlock;
tx = dmu_tx_create(zv->zv_objset);
dmu_tx_mark_netfree(tx);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error != 0) {
dmu_tx_abort(tx);
} else {
zvol_log_truncate(zv, tx, start, size, B_TRUE);
dmu_tx_commit(tx);
error = dmu_free_long_range(zv->zv_objset,
ZVOL_OBJ, start, size);
}
unlock:
zfs_rangelock_exit(zvr->lr);
if (error == 0 && sync)
zil_commit(zv->zv_zilog, ZVOL_OBJ);
rw_exit(&zv->zv_suspend_lock);
blk_generic_end_io_acct(zv->zv_zso->zvo_queue, WRITE,
&zv->zv_zso->zvo_disk->part0, start_jif);
BIO_END_IO(bio, -error);
kmem_free(zvr, sizeof (zv_request_t));
}
static void
zvol_read(void *arg)
{
int error = 0;
zv_request_t *zvr = arg;
struct bio *bio = zvr->bio;
uio_t uio = { { 0 }, 0 };
uio_from_bio(&uio, bio);
zvol_state_t *zv = zvr->zv;
ASSERT(zv && zv->zv_open_count > 0);
ssize_t start_resid = uio.uio_resid;
unsigned long start_jif = jiffies;
blk_generic_start_io_acct(zv->zv_zso->zvo_queue, READ, bio_sectors(bio),
&zv->zv_zso->zvo_disk->part0);
uint64_t volsize = zv->zv_volsize;
while (uio.uio_resid > 0 && uio.uio_loffset < volsize) {
uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1);
/* don't read past the end */
if (bytes > volsize - uio.uio_loffset)
bytes = volsize - uio.uio_loffset;
error = dmu_read_uio_dnode(zv->zv_dn, &uio, bytes);
if (error) {
/* convert checksum errors into IO errors */
if (error == ECKSUM)
error = SET_ERROR(EIO);
break;
}
}
zfs_rangelock_exit(zvr->lr);
int64_t nread = start_resid - uio.uio_resid;
dataset_kstats_update_read_kstats(&zv->zv_zso->zvo_kstat, nread);
task_io_account_read(nread);
rw_exit(&zv->zv_suspend_lock);
blk_generic_end_io_acct(zv->zv_zso->zvo_queue, READ,
&zv->zv_zso->zvo_disk->part0, start_jif);
BIO_END_IO(bio, -error);
kmem_free(zvr, sizeof (zv_request_t));
}
static MAKE_REQUEST_FN_RET
zvol_request(struct request_queue *q, struct bio *bio)
{
zvol_state_t *zv = q->queuedata;
fstrans_cookie_t cookie = spl_fstrans_mark();
uint64_t offset = BIO_BI_SECTOR(bio) << 9;
uint64_t size = BIO_BI_SIZE(bio);
int rw = bio_data_dir(bio);
zv_request_t *zvr;
if (bio_has_data(bio) && offset + size > zv->zv_volsize) {
printk(KERN_INFO
"%s: bad access: offset=%llu, size=%lu\n",
zv->zv_zso->zvo_disk->disk_name,
(long long unsigned)offset,
(long unsigned)size);
BIO_END_IO(bio, -SET_ERROR(EIO));
goto out;
}
if (rw == WRITE) {
boolean_t need_sync = B_FALSE;
if (unlikely(zv->zv_flags & ZVOL_RDONLY)) {
BIO_END_IO(bio, -SET_ERROR(EROFS));
goto out;
}
/*
* To be released in the I/O function. See the comment on
* rangelock_enter() below.
*/
rw_enter(&zv->zv_suspend_lock, RW_READER);
/*
* Open a ZIL if this is the first time we have written to this
* zvol. We protect zv->zv_zilog with zv_suspend_lock rather
* than zv_state_lock so that we don't need to acquire an
* additional lock in this path.
*/
if (zv->zv_zilog == NULL) {
rw_exit(&zv->zv_suspend_lock);
rw_enter(&zv->zv_suspend_lock, RW_WRITER);
if (zv->zv_zilog == NULL) {
zv->zv_zilog = zil_open(zv->zv_objset,
zvol_get_data);
zv->zv_flags |= ZVOL_WRITTEN_TO;
}
rw_downgrade(&zv->zv_suspend_lock);
}
/* bio marked as FLUSH need to flush before write */
if (bio_is_flush(bio))
zil_commit(zv->zv_zilog, ZVOL_OBJ);
/* Some requests are just for flush and nothing else. */
if (size == 0) {
rw_exit(&zv->zv_suspend_lock);
BIO_END_IO(bio, 0);
goto out;
}
zvr = kmem_alloc(sizeof (zv_request_t), KM_SLEEP);
zvr->zv = zv;
zvr->bio = bio;
/*
* To be released in the I/O function. Since the I/O functions
* are asynchronous, we take it here synchronously to make
* sure overlapped I/Os are properly ordered.
*/
zvr->lr = zfs_rangelock_enter(&zv->zv_rangelock, offset, size,
RL_WRITER);
/*
* Sync writes and discards execute zil_commit() which may need
* to take a RL_READER lock on the whole block being modified
* via its zillog->zl_get_data(): to avoid circular dependency
* issues with taskq threads execute these requests
* synchronously here in zvol_request().
*/
need_sync = bio_is_fua(bio) ||
zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
if (bio_is_discard(bio) || bio_is_secure_erase(bio)) {
if (zvol_request_sync || need_sync ||
taskq_dispatch(zvol_taskq, zvol_discard, zvr,
TQ_SLEEP) == TASKQID_INVALID)
zvol_discard(zvr);
} else {
if (zvol_request_sync || need_sync ||
taskq_dispatch(zvol_taskq, zvol_write, zvr,
TQ_SLEEP) == TASKQID_INVALID)
zvol_write(zvr);
}
} else {
/*
* The SCST driver, and possibly others, may issue READ I/Os
* with a length of zero bytes. These empty I/Os contain no
* data and require no additional handling.
*/
if (size == 0) {
BIO_END_IO(bio, 0);
goto out;
}
zvr = kmem_alloc(sizeof (zv_request_t), KM_SLEEP);
zvr->zv = zv;
zvr->bio = bio;
rw_enter(&zv->zv_suspend_lock, RW_READER);
zvr->lr = zfs_rangelock_enter(&zv->zv_rangelock, offset, size,
RL_READER);
if (zvol_request_sync || taskq_dispatch(zvol_taskq,
zvol_read, zvr, TQ_SLEEP) == TASKQID_INVALID)
zvol_read(zvr);
}
out:
spl_fstrans_unmark(cookie);
#ifdef HAVE_MAKE_REQUEST_FN_RET_INT
return (0);
#elif defined(HAVE_MAKE_REQUEST_FN_RET_QC)
return (BLK_QC_T_NONE);
#endif
}
static int
zvol_open(struct block_device *bdev, fmode_t flag)
{
zvol_state_t *zv;
int error = 0;
boolean_t drop_suspend = B_TRUE;
rw_enter(&zvol_state_lock, RW_READER);
/*
* Obtain a copy of private_data under the zvol_state_lock to make
* sure that either the result of zvol free code path setting
* bdev->bd_disk->private_data to NULL is observed, or zvol_free()
* is not called on this zv because of the positive zv_open_count.
*/
zv = bdev->bd_disk->private_data;
if (zv == NULL) {
rw_exit(&zvol_state_lock);
return (SET_ERROR(-ENXIO));
}
mutex_enter(&zv->zv_state_lock);
/*
* make sure zvol is not suspended during first open
* (hold zv_suspend_lock) and respect proper lock acquisition
* ordering - zv_suspend_lock before zv_state_lock
*/
if (zv->zv_open_count == 0) {
if (!rw_tryenter(&zv->zv_suspend_lock, RW_READER)) {
mutex_exit(&zv->zv_state_lock);
rw_enter(&zv->zv_suspend_lock, RW_READER);
mutex_enter(&zv->zv_state_lock);
/* check to see if zv_suspend_lock is needed */
if (zv->zv_open_count != 0) {
rw_exit(&zv->zv_suspend_lock);
drop_suspend = B_FALSE;
}
}
} else {
drop_suspend = B_FALSE;
}
rw_exit(&zvol_state_lock);
ASSERT(MUTEX_HELD(&zv->zv_state_lock));
ASSERT(zv->zv_open_count != 0 || RW_READ_HELD(&zv->zv_suspend_lock));
if (zv->zv_open_count == 0) {
error = -zvol_first_open(zv, !(flag & FMODE_WRITE));
if (error)
goto out_mutex;
}
if ((flag & FMODE_WRITE) && (zv->zv_flags & ZVOL_RDONLY)) {
error = -EROFS;
goto out_open_count;
}
zv->zv_open_count++;
mutex_exit(&zv->zv_state_lock);
if (drop_suspend)
rw_exit(&zv->zv_suspend_lock);
check_disk_change(bdev);
return (0);
out_open_count:
if (zv->zv_open_count == 0)
zvol_last_close(zv);
out_mutex:
mutex_exit(&zv->zv_state_lock);
if (drop_suspend)
rw_exit(&zv->zv_suspend_lock);
if (error == -EINTR) {
error = -ERESTARTSYS;
schedule();
}
return (SET_ERROR(error));
}
#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_RELEASE_VOID
static void
#else
static int
#endif
zvol_release(struct gendisk *disk, fmode_t mode)
{
zvol_state_t *zv;
boolean_t drop_suspend = B_TRUE;
rw_enter(&zvol_state_lock, RW_READER);
zv = disk->private_data;
mutex_enter(&zv->zv_state_lock);
ASSERT(zv->zv_open_count > 0);
/*
* make sure zvol is not suspended during last close
* (hold zv_suspend_lock) and respect proper lock acquisition
* ordering - zv_suspend_lock before zv_state_lock
*/
if (zv->zv_open_count == 1) {
if (!rw_tryenter(&zv->zv_suspend_lock, RW_READER)) {
mutex_exit(&zv->zv_state_lock);
rw_enter(&zv->zv_suspend_lock, RW_READER);
mutex_enter(&zv->zv_state_lock);
/* check to see if zv_suspend_lock is needed */
if (zv->zv_open_count != 1) {
rw_exit(&zv->zv_suspend_lock);
drop_suspend = B_FALSE;
}
}
} else {
drop_suspend = B_FALSE;
}
rw_exit(&zvol_state_lock);
ASSERT(MUTEX_HELD(&zv->zv_state_lock));
ASSERT(zv->zv_open_count != 1 || RW_READ_HELD(&zv->zv_suspend_lock));
zv->zv_open_count--;
if (zv->zv_open_count == 0)
zvol_last_close(zv);
mutex_exit(&zv->zv_state_lock);
if (drop_suspend)
rw_exit(&zv->zv_suspend_lock);
#ifndef HAVE_BLOCK_DEVICE_OPERATIONS_RELEASE_VOID
return (0);
#endif
}
static int
zvol_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
zvol_state_t *zv = bdev->bd_disk->private_data;
int error = 0;
ASSERT3U(zv->zv_open_count, >, 0);
switch (cmd) {
case BLKFLSBUF:
fsync_bdev(bdev);
invalidate_bdev(bdev);
rw_enter(&zv->zv_suspend_lock, RW_READER);
if (!(zv->zv_flags & ZVOL_RDONLY))
txg_wait_synced(dmu_objset_pool(zv->zv_objset), 0);
rw_exit(&zv->zv_suspend_lock);
break;
case BLKZNAME:
mutex_enter(&zv->zv_state_lock);
error = copy_to_user((void *)arg, zv->zv_name, MAXNAMELEN);
mutex_exit(&zv->zv_state_lock);
break;
default:
error = -ENOTTY;
break;
}
return (SET_ERROR(error));
}
#ifdef CONFIG_COMPAT
static int
zvol_compat_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
return (zvol_ioctl(bdev, mode, cmd, arg));
}
#else
#define zvol_compat_ioctl NULL
#endif
/*
* Linux 2.6.38 preferred interface.
*/
#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
static unsigned int
zvol_check_events(struct gendisk *disk, unsigned int clearing)
{
unsigned int mask = 0;
rw_enter(&zvol_state_lock, RW_READER);
zvol_state_t *zv = disk->private_data;
if (zv != NULL) {
mutex_enter(&zv->zv_state_lock);
mask = zv->zv_changed ? DISK_EVENT_MEDIA_CHANGE : 0;
zv->zv_changed = 0;
mutex_exit(&zv->zv_state_lock);
}
rw_exit(&zvol_state_lock);
return (mask);
}
#else
static int
zvol_media_changed(struct gendisk *disk)
{
int changed = 0;
rw_enter(&zvol_state_lock, RW_READER);
zvol_state_t *zv = disk->private_data;
if (zv != NULL) {
mutex_enter(&zv->zv_state_lock);
changed = zv->zv_changed;
zv->zv_changed = 0;
mutex_exit(&zv->zv_state_lock);
}
rw_exit(&zvol_state_lock);
return (changed);
}
#endif
static int
zvol_revalidate_disk(struct gendisk *disk)
{
rw_enter(&zvol_state_lock, RW_READER);
zvol_state_t *zv = disk->private_data;
if (zv != NULL) {
mutex_enter(&zv->zv_state_lock);
set_capacity(zv->zv_zso->zvo_disk,
zv->zv_volsize >> SECTOR_BITS);
mutex_exit(&zv->zv_state_lock);
}
rw_exit(&zvol_state_lock);
return (0);
}
int
zvol_update_volsize(zvol_state_t *zv, uint64_t volsize)
{
revalidate_disk(zv->zv_zso->zvo_disk);
return (0);
}
static void
zvol_clear_private(zvol_state_t *zv)
{
/*
* Cleared while holding zvol_state_lock as a writer
* which will prevent zvol_open() from opening it.
*/
zv->zv_zso->zvo_disk->private_data = NULL;
}
/*
* Provide a simple virtual geometry for legacy compatibility. For devices
* smaller than 1 MiB a small head and sector count is used to allow very
* tiny devices. For devices over 1 Mib a standard head and sector count
* is used to keep the cylinders count reasonable.
*/
static int
zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
zvol_state_t *zv = bdev->bd_disk->private_data;
sector_t sectors;
ASSERT3U(zv->zv_open_count, >, 0);
sectors = get_capacity(zv->zv_zso->zvo_disk);
if (sectors > 2048) {
geo->heads = 16;
geo->sectors = 63;
} else {
geo->heads = 2;
geo->sectors = 4;
}
geo->start = 0;
geo->cylinders = sectors / (geo->heads * geo->sectors);
return (0);
}
/*
* Find a zvol_state_t given the full major+minor dev_t. If found,
* return with zv_state_lock taken, otherwise, return (NULL) without
* taking zv_state_lock.
*/
static zvol_state_t *
zvol_find_by_dev(dev_t dev)
{
zvol_state_t *zv;
rw_enter(&zvol_state_lock, RW_READER);
for (zv = list_head(&zvol_state_list); zv != NULL;
zv = list_next(&zvol_state_list, zv)) {
mutex_enter(&zv->zv_state_lock);
if (zv->zv_zso->zvo_dev == dev) {
rw_exit(&zvol_state_lock);
return (zv);
}
mutex_exit(&zv->zv_state_lock);
}
rw_exit(&zvol_state_lock);
return (NULL);
}
void
zvol_validate_dev(zvol_state_t *zv)
{
ASSERT3U(MINOR(zv->zv_zso->zvo_dev) & ZVOL_MINOR_MASK, ==, 0);
}
static struct kobject *
zvol_probe(dev_t dev, int *part, void *arg)
{
zvol_state_t *zv;
struct kobject *kobj;
zv = zvol_find_by_dev(dev);
kobj = zv ? get_disk_and_module(zv->zv_zso->zvo_disk) : NULL;
ASSERT(zv == NULL || MUTEX_HELD(&zv->zv_state_lock));
if (zv)
mutex_exit(&zv->zv_state_lock);
return (kobj);
}
static struct block_device_operations zvol_ops = {
.open = zvol_open,
.release = zvol_release,
.ioctl = zvol_ioctl,
.compat_ioctl = zvol_compat_ioctl,
#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
.check_events = zvol_check_events,
#else
.media_changed = zvol_media_changed,
#endif
.revalidate_disk = zvol_revalidate_disk,
.getgeo = zvol_getgeo,
.owner = THIS_MODULE,
};
/*
* Allocate memory for a new zvol_state_t and setup the required
* request queue and generic disk structures for the block device.
*/
static zvol_state_t *
zvol_alloc(dev_t dev, const char *name)
{
zvol_state_t *zv;
uint64_t volmode;
if (dsl_prop_get_integer(name, "volmode", &volmode, NULL) != 0)
return (NULL);
if (volmode == ZFS_VOLMODE_DEFAULT)
volmode = zvol_volmode;
if (volmode == ZFS_VOLMODE_NONE)
return (NULL);
zv = kmem_zalloc(sizeof (zvol_state_t), KM_SLEEP);
zv->zv_zso = kmem_zalloc(sizeof (struct zvol_state_os), KM_SLEEP);
list_link_init(&zv->zv_next);
mutex_init(&zv->zv_state_lock, NULL, MUTEX_DEFAULT, NULL);
zv->zv_zso->zvo_queue = blk_alloc_queue(GFP_ATOMIC);
if (zv->zv_zso->zvo_queue == NULL)
goto out_kmem;
blk_queue_make_request(zv->zv_zso->zvo_queue, zvol_request);
blk_queue_set_write_cache(zv->zv_zso->zvo_queue, B_TRUE, B_TRUE);
/* Limit read-ahead to a single page to prevent over-prefetching. */
blk_queue_set_read_ahead(zv->zv_zso->zvo_queue, 1);
/* Disable write merging in favor of the ZIO pipeline. */
blk_queue_flag_set(QUEUE_FLAG_NOMERGES, zv->zv_zso->zvo_queue);
zv->zv_zso->zvo_disk = alloc_disk(ZVOL_MINORS);
if (zv->zv_zso->zvo_disk == NULL)
goto out_queue;
zv->zv_zso->zvo_queue->queuedata = zv;
zv->zv_zso->zvo_dev = dev;
zv->zv_open_count = 0;
strlcpy(zv->zv_name, name, MAXNAMELEN);
zfs_rangelock_init(&zv->zv_rangelock, NULL, NULL);
rw_init(&zv->zv_suspend_lock, NULL, RW_DEFAULT, NULL);
zv->zv_zso->zvo_disk->major = zvol_major;
#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
zv->zv_zso->zvo_disk->events = DISK_EVENT_MEDIA_CHANGE;
#endif
if (volmode == ZFS_VOLMODE_DEV) {
/*
* ZFS_VOLMODE_DEV disable partitioning on ZVOL devices: set
* gendisk->minors = 1 as noted in include/linux/genhd.h.
* Also disable extended partition numbers (GENHD_FL_EXT_DEVT)
* and suppresses partition scanning (GENHD_FL_NO_PART_SCAN)
* setting gendisk->flags accordingly.
*/
zv->zv_zso->zvo_disk->minors = 1;
#if defined(GENHD_FL_EXT_DEVT)
zv->zv_zso->zvo_disk->flags &= ~GENHD_FL_EXT_DEVT;
#endif
#if defined(GENHD_FL_NO_PART_SCAN)
zv->zv_zso->zvo_disk->flags |= GENHD_FL_NO_PART_SCAN;
#endif
}
zv->zv_zso->zvo_disk->first_minor = (dev & MINORMASK);
zv->zv_zso->zvo_disk->fops = &zvol_ops;
zv->zv_zso->zvo_disk->private_data = zv;
zv->zv_zso->zvo_disk->queue = zv->zv_zso->zvo_queue;
snprintf(zv->zv_zso->zvo_disk->disk_name, DISK_NAME_LEN, "%s%d",
ZVOL_DEV_NAME, (dev & MINORMASK));
return (zv);
out_queue:
blk_cleanup_queue(zv->zv_zso->zvo_queue);
out_kmem:
kmem_free(zv->zv_zso, sizeof (struct zvol_state_os));
kmem_free(zv, sizeof (zvol_state_t));
return (NULL);
}
/*
* Cleanup then free a zvol_state_t which was created by zvol_alloc().
* At this time, the structure is not opened by anyone, is taken off
* the zvol_state_list, and has its private data set to NULL.
* The zvol_state_lock is dropped.
Timeout waiting for ZVOL device to be created We've seen cases where after creating a ZVOL, the ZVOL device node in "/dev" isn't generated after 20 seconds of waiting, which is the point at which our applications gives up on waiting and reports an error. The workload when this occurs is to "refresh" 400+ ZVOLs roughly at the same time, based on a policy set by the user. This refresh operation will destroy the ZVOL, and re-create it based on a snapshot. When this occurs, we see many hundreds of entries on the "z_zvol" taskq (based on inspection of the /proc/spl/taskq-all file). Many of the entries on the taskq end up in the "zvol_remove_minors_impl" function, and I've measured the latency of that function: Function = zvol_remove_minors_impl msecs : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 1 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 1 | | 128 -> 255 : 45 |****************************************| 256 -> 511 : 5 |**** | That data is from a 10 second sample, using the BCC "funclatency" tool. As we can see, in this 10 second sample, most calls took 128ms at a minimum. Thus, some basic math tells us that in any 20 second interval, we could only process at most about 150 removals, which is much less than the 400+ that'll occur based on the workload. As a result of this, and since all ZVOL minor operations will go through the single threaded "z_zvol" taskq, the latency for creating a single ZVOL device can be unreasonably large due to other ZVOL activity on the system. In our case, it's large enough to cause the application to generate an error and fail the operation. When profiling the "zvol_remove_minors_impl" function, I saw that most of the time in the function was spent off-cpu, blocked in the function "taskq_wait_outstanding". How this works, is "zvol_remove_minors_impl" will dispatch calls to "zvol_free" using the "system_taskq", and then the "taskq_wait_outstanding" function is used to wait for all of those dispatched calls to occur before "zvol_remove_minors_impl" will return. As far as I can tell, "zvol_remove_minors_impl" doesn't necessarily have to wait for all calls to "zvol_free" to occur before it returns. Thus, this change removes the call to "taskq_wait_oustanding", so that calls to "zvol_free" don't affect the latency of "zvol_remove_minors_impl". Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Gallagher <john.gallagher@delphix.com> Signed-off-by: Prakash Surya <prakash.surya@delphix.com> Closes #9380
2019-10-01 22:33:12 +03:00
*
* This function may take many milliseconds to complete (e.g. we've seen
* it take over 256ms), due to the calls to "blk_cleanup_queue" and
* "del_gendisk". Thus, consumers need to be careful to account for this
* latency when calling this function.
*/
static void
zvol_free(zvol_state_t *zv)
{
ASSERT(!RW_LOCK_HELD(&zv->zv_suspend_lock));
ASSERT(!MUTEX_HELD(&zv->zv_state_lock));
ASSERT(zv->zv_open_count == 0);
ASSERT(zv->zv_zso->zvo_disk->private_data == NULL);
rw_destroy(&zv->zv_suspend_lock);
zfs_rangelock_fini(&zv->zv_rangelock);
del_gendisk(zv->zv_zso->zvo_disk);
blk_cleanup_queue(zv->zv_zso->zvo_queue);
put_disk(zv->zv_zso->zvo_disk);
ida_simple_remove(&zvol_ida,
MINOR(zv->zv_zso->zvo_dev) >> ZVOL_MINOR_BITS);
mutex_destroy(&zv->zv_state_lock);
dataset_kstats_destroy(&zv->zv_zso->zvo_kstat);
kmem_free(zv->zv_zso, sizeof (struct zvol_state_os));
kmem_free(zv, sizeof (zvol_state_t));
}
/*
* Create a block device minor node and setup the linkage between it
* and the specified volume. Once this function returns the block
* device is live and ready for use.
*/
static int
zvol_create_minor(const char *name)
{
zvol_state_t *zv;
objset_t *os;
dmu_object_info_t *doi;
uint64_t volsize;
uint64_t len;
unsigned minor = 0;
int error = 0;
int idx;
uint64_t hash = zvol_name_hash(name);
if (zvol_inhibit_dev)
return (0);
idx = ida_simple_get(&zvol_ida, 0, 0, kmem_flags_convert(KM_SLEEP));
if (idx < 0)
return (SET_ERROR(-idx));
minor = idx << ZVOL_MINOR_BITS;
zv = zvol_find_by_name_hash(name, hash, RW_NONE);
if (zv) {
ASSERT(MUTEX_HELD(&zv->zv_state_lock));
mutex_exit(&zv->zv_state_lock);
ida_simple_remove(&zvol_ida, idx);
return (SET_ERROR(EEXIST));
}
doi = kmem_alloc(sizeof (dmu_object_info_t), KM_SLEEP);
error = dmu_objset_own(name, DMU_OST_ZVOL, B_TRUE, B_TRUE, FTAG, &os);
if (error)
goto out_doi;
error = dmu_object_info(os, ZVOL_OBJ, doi);
if (error)
goto out_dmu_objset_disown;
error = zap_lookup(os, ZVOL_ZAP_OBJ, "size", 8, 1, &volsize);
if (error)
goto out_dmu_objset_disown;
zv = zvol_alloc(MKDEV(zvol_major, minor), name);
if (zv == NULL) {
error = SET_ERROR(EAGAIN);
goto out_dmu_objset_disown;
}
zv->zv_hash = hash;
if (dmu_objset_is_snapshot(os))
zv->zv_flags |= ZVOL_RDONLY;
zv->zv_volblocksize = doi->doi_data_block_size;
zv->zv_volsize = volsize;
zv->zv_objset = os;
set_capacity(zv->zv_zso->zvo_disk, zv->zv_volsize >> 9);
blk_queue_max_hw_sectors(zv->zv_zso->zvo_queue,
(DMU_MAX_ACCESS / 4) >> 9);
blk_queue_max_segments(zv->zv_zso->zvo_queue, UINT16_MAX);
blk_queue_max_segment_size(zv->zv_zso->zvo_queue, UINT_MAX);
blk_queue_physical_block_size(zv->zv_zso->zvo_queue,
zv->zv_volblocksize);
blk_queue_io_opt(zv->zv_zso->zvo_queue, zv->zv_volblocksize);
blk_queue_max_discard_sectors(zv->zv_zso->zvo_queue,
(zvol_max_discard_blocks * zv->zv_volblocksize) >> 9);
blk_queue_discard_granularity(zv->zv_zso->zvo_queue,
zv->zv_volblocksize);
blk_queue_flag_set(QUEUE_FLAG_DISCARD, zv->zv_zso->zvo_queue);
#ifdef QUEUE_FLAG_NONROT
blk_queue_flag_set(QUEUE_FLAG_NONROT, zv->zv_zso->zvo_queue);
#endif
#ifdef QUEUE_FLAG_ADD_RANDOM
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, zv->zv_zso->zvo_queue);
#endif
/* This flag was introduced in kernel version 4.12. */
#ifdef QUEUE_FLAG_SCSI_PASSTHROUGH
blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, zv->zv_zso->zvo_queue);
#endif
if (spa_writeable(dmu_objset_spa(os))) {
if (zil_replay_disable)
zil_destroy(dmu_objset_zil(os), B_FALSE);
else
zil_replay(os, zv, zvol_replay_vector);
}
ASSERT3P(zv->zv_zso->zvo_kstat.dk_kstats, ==, NULL);
dataset_kstats_create(&zv->zv_zso->zvo_kstat, zv->zv_objset);
/*
* When udev detects the addition of the device it will immediately
* invoke blkid(8) to determine the type of content on the device.
* Prefetching the blocks commonly scanned by blkid(8) will speed
* up this process.
*/
len = MIN(MAX(zvol_prefetch_bytes, 0), SPA_MAXBLOCKSIZE);
if (len > 0) {
dmu_prefetch(os, ZVOL_OBJ, 0, 0, len, ZIO_PRIORITY_SYNC_READ);
dmu_prefetch(os, ZVOL_OBJ, 0, volsize - len, len,
ZIO_PRIORITY_SYNC_READ);
}
zv->zv_objset = NULL;
out_dmu_objset_disown:
dmu_objset_disown(os, B_TRUE, FTAG);
out_doi:
kmem_free(doi, sizeof (dmu_object_info_t));
/*
* Keep in mind that once add_disk() is called, the zvol is
* announced to the world, and zvol_open()/zvol_release() can
* be called at any time. Incidentally, add_disk() itself calls
* zvol_open()->zvol_first_open() and zvol_release()->zvol_last_close()
* directly as well.
*/
if (error == 0) {
rw_enter(&zvol_state_lock, RW_WRITER);
zvol_insert(zv);
rw_exit(&zvol_state_lock);
add_disk(zv->zv_zso->zvo_disk);
} else {
ida_simple_remove(&zvol_ida, idx);
}
return (SET_ERROR(error));
}
static void
zvol_rename_minor(zvol_state_t *zv, const char *newname)
{
int readonly = get_disk_ro(zv->zv_zso->zvo_disk);
ASSERT(RW_LOCK_HELD(&zvol_state_lock));
ASSERT(MUTEX_HELD(&zv->zv_state_lock));
strlcpy(zv->zv_name, newname, sizeof (zv->zv_name));
/* move to new hashtable entry */
zv->zv_hash = zvol_name_hash(zv->zv_name);
hlist_del(&zv->zv_hlink);
hlist_add_head(&zv->zv_hlink, ZVOL_HT_HEAD(zv->zv_hash));
/*
* The block device's read-only state is briefly changed causing
* a KOBJ_CHANGE uevent to be issued. This ensures udev detects
* the name change and fixes the symlinks. This does not change
* ZVOL_RDONLY in zv->zv_flags so the actual read-only state never
* changes. This would normally be done using kobject_uevent() but
* that is a GPL-only symbol which is why we need this workaround.
*/
set_disk_ro(zv->zv_zso->zvo_disk, !readonly);
set_disk_ro(zv->zv_zso->zvo_disk, readonly);
}
static void
zvol_set_disk_ro_impl(zvol_state_t *zv, int flags)
{
set_disk_ro(zv->zv_zso->zvo_disk, flags);
}
static void
zvol_set_capacity_impl(zvol_state_t *zv, uint64_t capacity)
{
set_capacity(zv->zv_zso->zvo_disk, capacity);
}
const static zvol_platform_ops_t zvol_linux_ops = {
.zv_free = zvol_free,
.zv_rename_minor = zvol_rename_minor,
.zv_create_minor = zvol_create_minor,
.zv_update_volsize = zvol_update_volsize,
.zv_clear_private = zvol_clear_private,
.zv_is_zvol = zvol_is_zvol_impl,
.zv_set_disk_ro = zvol_set_disk_ro_impl,
.zv_set_capacity = zvol_set_capacity_impl,
};
int
zvol_init(void)
{
int error;
int threads = MIN(MAX(zvol_threads, 1), 1024);
error = register_blkdev(zvol_major, ZVOL_DRIVER);
if (error) {
printk(KERN_INFO "ZFS: register_blkdev() failed %d\n", error);
return (error);
}
zvol_taskq = taskq_create(ZVOL_DRIVER, threads, maxclsyspri,
threads * 2, INT_MAX, TASKQ_PREPOPULATE | TASKQ_DYNAMIC);
if (zvol_taskq == NULL) {
unregister_blkdev(zvol_major, ZVOL_DRIVER);
return (-ENOMEM);
}
zvol_init_impl();
blk_register_region(MKDEV(zvol_major, 0), 1UL << MINORBITS,
THIS_MODULE, zvol_probe, NULL, NULL);
ida_init(&zvol_ida);
zvol_register_ops(&zvol_linux_ops);
return (0);
}
void
zvol_fini(void)
{
zvol_fini_impl();
blk_unregister_region(MKDEV(zvol_major, 0), 1UL << MINORBITS);
unregister_blkdev(zvol_major, ZVOL_DRIVER);
taskq_destroy(zvol_taskq);
ida_destroy(&zvol_ida);
}
/* BEGIN CSTYLED */
module_param(zvol_inhibit_dev, uint, 0644);
MODULE_PARM_DESC(zvol_inhibit_dev, "Do not create zvol device nodes");
module_param(zvol_major, uint, 0444);
MODULE_PARM_DESC(zvol_major, "Major number for zvol device");
module_param(zvol_threads, uint, 0444);
MODULE_PARM_DESC(zvol_threads, "Max number of threads to handle I/O requests");
module_param(zvol_request_sync, uint, 0644);
MODULE_PARM_DESC(zvol_request_sync, "Synchronously handle bio requests");
module_param(zvol_max_discard_blocks, ulong, 0444);
MODULE_PARM_DESC(zvol_max_discard_blocks, "Max number of blocks to discard");
module_param(zvol_prefetch_bytes, uint, 0644);
MODULE_PARM_DESC(zvol_prefetch_bytes, "Prefetch N bytes at zvol start+end");
module_param(zvol_volmode, uint, 0644);
MODULE_PARM_DESC(zvol_volmode, "Default volmode property value");
/* END CSTYLED */