mirror_zfs/include/sys/fs/zfs.h

940 lines
28 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
2009-08-18 22:43:27 +04:00
2008-11-20 23:01:55 +03:00
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
* Copyright (c) 2013 by Delphix. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2012, Joyent, Inc. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
/* Portions Copyright 2010 Robert Milkowski */
2008-11-20 23:01:55 +03:00
#ifndef _SYS_FS_ZFS_H
#define _SYS_FS_ZFS_H
2009-08-18 22:43:27 +04:00
#include <sys/time.h>
2008-11-20 23:01:55 +03:00
#ifdef __cplusplus
extern "C" {
#endif
/*
* Types and constants shared between userland and the kernel.
*/
/*
* Each dataset can be one of the following types. These constants can be
* combined into masks that can be passed to various functions.
*/
typedef enum {
ZFS_TYPE_FILESYSTEM = 0x1,
ZFS_TYPE_SNAPSHOT = 0x2,
ZFS_TYPE_VOLUME = 0x4,
ZFS_TYPE_POOL = 0x8
} zfs_type_t;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
typedef enum dmu_objset_type {
DMU_OST_NONE,
DMU_OST_META,
DMU_OST_ZFS,
DMU_OST_ZVOL,
DMU_OST_OTHER, /* For testing only! */
DMU_OST_ANY, /* Be careful! */
DMU_OST_NUMTYPES
} dmu_objset_type_t;
2008-11-20 23:01:55 +03:00
#define ZFS_TYPE_DATASET \
(ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT)
2009-07-03 02:44:48 +04:00
#define ZAP_MAXNAMELEN 256
#define ZAP_MAXVALUELEN (1024 * 8)
#define ZAP_OLDMAXVALUELEN 1024
2008-11-20 23:01:55 +03:00
/*
* Dataset properties are identified by these constants and must be added to
* the end of this list to ensure that external consumers are not affected
* by the change. If you make any changes to this list, be sure to update
* the property table in module/zcommon/zfs_prop.c.
2008-11-20 23:01:55 +03:00
*/
typedef enum {
ZFS_PROP_TYPE,
ZFS_PROP_CREATION,
ZFS_PROP_USED,
ZFS_PROP_AVAILABLE,
ZFS_PROP_REFERENCED,
ZFS_PROP_COMPRESSRATIO,
ZFS_PROP_MOUNTED,
ZFS_PROP_ORIGIN,
ZFS_PROP_QUOTA,
ZFS_PROP_RESERVATION,
ZFS_PROP_VOLSIZE,
ZFS_PROP_VOLBLOCKSIZE,
ZFS_PROP_RECORDSIZE,
ZFS_PROP_MOUNTPOINT,
ZFS_PROP_SHARENFS,
ZFS_PROP_CHECKSUM,
ZFS_PROP_COMPRESSION,
ZFS_PROP_ATIME,
ZFS_PROP_DEVICES,
ZFS_PROP_EXEC,
ZFS_PROP_SETUID,
ZFS_PROP_READONLY,
ZFS_PROP_ZONED,
ZFS_PROP_SNAPDIR,
ZFS_PROP_PRIVATE, /* not exposed to user, temporary */
2008-11-20 23:01:55 +03:00
ZFS_PROP_ACLINHERIT,
ZFS_PROP_CREATETXG, /* not exposed to the user */
ZFS_PROP_NAME, /* not exposed to the user */
ZFS_PROP_CANMOUNT,
ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */
ZFS_PROP_XATTR,
ZFS_PROP_NUMCLONES, /* not exposed to the user */
ZFS_PROP_COPIES,
ZFS_PROP_VERSION,
ZFS_PROP_UTF8ONLY,
ZFS_PROP_NORMALIZE,
ZFS_PROP_CASE,
ZFS_PROP_VSCAN,
ZFS_PROP_NBMAND,
ZFS_PROP_SHARESMB,
ZFS_PROP_REFQUOTA,
ZFS_PROP_REFRESERVATION,
ZFS_PROP_GUID,
ZFS_PROP_PRIMARYCACHE,
ZFS_PROP_SECONDARYCACHE,
ZFS_PROP_USEDSNAP,
ZFS_PROP_USEDDS,
ZFS_PROP_USEDCHILD,
ZFS_PROP_USEDREFRESERV,
2009-07-03 02:44:48 +04:00
ZFS_PROP_USERACCOUNTING, /* not exposed to the user */
ZFS_PROP_STMF_SHAREINFO, /* not exposed to the user */
2009-08-18 22:43:27 +04:00
ZFS_PROP_DEFER_DESTROY,
ZFS_PROP_USERREFS,
ZFS_PROP_LOGBIAS,
ZFS_PROP_UNIQUE, /* not exposed to the user */
ZFS_PROP_OBJSETID, /* not exposed to the user */
ZFS_PROP_DEDUP,
ZFS_PROP_MLSLABEL,
ZFS_PROP_SYNC,
ZFS_PROP_REFRATIO,
ZFS_PROP_WRITTEN,
ZFS_PROP_CLONES,
ZFS_PROP_LOGICALUSED,
ZFS_PROP_LOGICALREFERENCED,
ZFS_PROP_INCONSISTENT, /* not exposed to the user */
Add snapdev=[hidden|visible] dataset property The new snapdev dataset property may be set to control the visibility of zvol snapshot devices. By default this value is set to 'hidden' which will prevent zvol snapshots from appearing under /dev/zvol/ and /dev/<dataset>/. When set to 'visible' all zvol snapshots for the dataset will be visible. This functionality was largely added because when automatic snapshoting is enabled large numbers of read-only zvol snapshots will be created. When creating these devices the kernel will attempt to read their partition tables, and blkid will attempt to identify any filesystems on those partitions. This leads to a variety of issues: 1) The zvol partition tables will be read in the context of the `modprobe zfs` for automatically imported pools. This is undesirable and should be done asynchronously, but for now reducing the number of visible devices helps. 2) Udev expects to be able to complete its work for a new block devices fairly quickly. When many zvol devices are added at the same time this is no longer be true. It can lead to udev timeouts and missing /dev/zvol links. 3) Simply having lots of devices in /dev/ can be aukward from a management standpoint. Hidding the devices your unlikely to ever use helps with this. Any snapshot device which is needed can be made visible by changing the snapdev property. NOTE: This patch changes the default behavior for zvols which was effectively 'snapdev=visible'. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1235 Closes #945 Issue #956 Issue #756
2013-02-14 03:11:59 +04:00
ZFS_PROP_SNAPDEV,
ZFS_PROP_ACLTYPE,
2008-11-20 23:01:55 +03:00
ZFS_NUM_PROPS
} zfs_prop_t;
2009-07-03 02:44:48 +04:00
typedef enum {
ZFS_PROP_USERUSED,
ZFS_PROP_USERQUOTA,
ZFS_PROP_GROUPUSED,
ZFS_PROP_GROUPQUOTA,
ZFS_NUM_USERQUOTA_PROPS
} zfs_userquota_prop_t;
extern const char *zfs_userquota_prop_prefixes[ZFS_NUM_USERQUOTA_PROPS];
2008-11-20 23:01:55 +03:00
/*
* Pool properties are identified by these constants and must be added to the
* end of this list to ensure that external consumers are not affected
2008-11-20 23:01:55 +03:00
* by the change. If you make any changes to this list, be sure to update
* the property table in module/zcommon/zpool_prop.c.
2008-11-20 23:01:55 +03:00
*/
typedef enum {
ZPOOL_PROP_NAME,
ZPOOL_PROP_SIZE,
ZPOOL_PROP_CAPACITY,
ZPOOL_PROP_ALTROOT,
ZPOOL_PROP_HEALTH,
ZPOOL_PROP_GUID,
ZPOOL_PROP_VERSION,
ZPOOL_PROP_BOOTFS,
ZPOOL_PROP_DELEGATION,
ZPOOL_PROP_AUTOREPLACE,
ZPOOL_PROP_CACHEFILE,
ZPOOL_PROP_FAILUREMODE,
ZPOOL_PROP_LISTSNAPS,
2009-07-03 02:44:48 +04:00
ZPOOL_PROP_AUTOEXPAND,
ZPOOL_PROP_DEDUPDITTO,
ZPOOL_PROP_DEDUPRATIO,
ZPOOL_PROP_FREE,
ZPOOL_PROP_ALLOCATED,
ZPOOL_PROP_READONLY,
ZPOOL_PROP_ASHIFT,
ZPOOL_PROP_COMMENT,
ZPOOL_PROP_EXPANDSZ,
ZPOOL_PROP_FREEING,
2008-11-20 23:01:55 +03:00
ZPOOL_NUM_PROPS
} zpool_prop_t;
/* Small enough to not hog a whole line of printout in zpool(1M). */
#define ZPROP_MAX_COMMENT 32
2008-11-20 23:01:55 +03:00
#define ZPROP_CONT -2
#define ZPROP_INVAL -1
#define ZPROP_VALUE "value"
#define ZPROP_SOURCE "source"
typedef enum {
ZPROP_SRC_NONE = 0x1,
ZPROP_SRC_DEFAULT = 0x2,
ZPROP_SRC_TEMPORARY = 0x4,
ZPROP_SRC_LOCAL = 0x8,
ZPROP_SRC_INHERITED = 0x10,
ZPROP_SRC_RECEIVED = 0x20
2008-11-20 23:01:55 +03:00
} zprop_source_t;
#define ZPROP_SRC_ALL 0x3f
#define ZPROP_SOURCE_VAL_RECVD "$recvd"
#define ZPROP_N_MORE_ERRORS "N_MORE_ERRORS"
/*
* Dataset flag implemented as a special entry in the props zap object
* indicating that the dataset has received properties on or after
* SPA_VERSION_RECVD_PROPS. The first such receive blows away local properties
* just as it did in earlier versions, and thereafter, local properties are
* preserved.
*/
#define ZPROP_HAS_RECVD "$hasrecvd"
typedef enum {
ZPROP_ERR_NOCLEAR = 0x1, /* failure to clear existing props */
ZPROP_ERR_NORESTORE = 0x2 /* failure to restore props on error */
} zprop_errflags_t;
2008-11-20 23:01:55 +03:00
typedef int (*zprop_func)(int, void *);
/*
* Properties to be set on the root file system of a new pool
* are stuffed into their own nvlist, which is then included in
* the properties nvlist with the pool properties.
*/
#define ZPOOL_ROOTFS_PROPS "root-props-nvl"
2008-11-20 23:01:55 +03:00
/*
* Dataset property functions shared between libzfs and kernel.
*/
const char *zfs_prop_default_string(zfs_prop_t);
uint64_t zfs_prop_default_numeric(zfs_prop_t);
boolean_t zfs_prop_readonly(zfs_prop_t);
boolean_t zfs_prop_inheritable(zfs_prop_t);
boolean_t zfs_prop_setonce(zfs_prop_t);
const char *zfs_prop_to_name(zfs_prop_t);
zfs_prop_t zfs_name_to_prop(const char *);
boolean_t zfs_prop_user(const char *);
boolean_t zfs_prop_userquota(const char *);
boolean_t zfs_prop_written(const char *);
2008-11-20 23:01:55 +03:00
int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **);
int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *);
uint64_t zfs_prop_random_value(zfs_prop_t, uint64_t seed);
boolean_t zfs_prop_valid_for_type(int, zfs_type_t);
2008-11-20 23:01:55 +03:00
/*
* Pool property functions shared between libzfs and kernel.
*/
zpool_prop_t zpool_name_to_prop(const char *);
const char *zpool_prop_to_name(zpool_prop_t);
const char *zpool_prop_default_string(zpool_prop_t);
uint64_t zpool_prop_default_numeric(zpool_prop_t);
boolean_t zpool_prop_readonly(zpool_prop_t);
boolean_t zpool_prop_feature(const char *);
boolean_t zpool_prop_unsupported(const char *);
2008-11-20 23:01:55 +03:00
int zpool_prop_index_to_string(zpool_prop_t, uint64_t, const char **);
int zpool_prop_string_to_index(zpool_prop_t, const char *, uint64_t *);
uint64_t zpool_prop_random_value(zpool_prop_t, uint64_t seed);
2008-11-20 23:01:55 +03:00
/*
* Definitions for the Delegation.
*/
typedef enum {
ZFS_DELEG_WHO_UNKNOWN = 0,
ZFS_DELEG_USER = 'u',
ZFS_DELEG_USER_SETS = 'U',
ZFS_DELEG_GROUP = 'g',
ZFS_DELEG_GROUP_SETS = 'G',
ZFS_DELEG_EVERYONE = 'e',
ZFS_DELEG_EVERYONE_SETS = 'E',
ZFS_DELEG_CREATE = 'c',
ZFS_DELEG_CREATE_SETS = 'C',
ZFS_DELEG_NAMED_SET = 's',
ZFS_DELEG_NAMED_SET_SETS = 'S'
} zfs_deleg_who_type_t;
typedef enum {
ZFS_DELEG_NONE = 0,
ZFS_DELEG_PERM_LOCAL = 1,
ZFS_DELEG_PERM_DESCENDENT = 2,
ZFS_DELEG_PERM_LOCALDESCENDENT = 3,
ZFS_DELEG_PERM_CREATE = 4
} zfs_deleg_inherit_t;
#define ZFS_DELEG_PERM_UID "uid"
#define ZFS_DELEG_PERM_GID "gid"
#define ZFS_DELEG_PERM_GROUPS "groups"
#define ZFS_MLSLABEL_DEFAULT "none"
2009-07-03 02:44:48 +04:00
#define ZFS_SMB_ACL_SRC "src"
#define ZFS_SMB_ACL_TARGET "target"
2008-11-20 23:01:55 +03:00
typedef enum {
ZFS_CANMOUNT_OFF = 0,
ZFS_CANMOUNT_ON = 1,
ZFS_CANMOUNT_NOAUTO = 2
} zfs_canmount_type_t;
typedef enum {
ZFS_LOGBIAS_LATENCY = 0,
ZFS_LOGBIAS_THROUGHPUT = 1
} zfs_logbias_op_t;
2008-11-20 23:01:55 +03:00
typedef enum zfs_share_op {
ZFS_SHARE_NFS = 0,
ZFS_UNSHARE_NFS = 1,
ZFS_SHARE_SMB = 2,
ZFS_UNSHARE_SMB = 3
} zfs_share_op_t;
2009-07-03 02:44:48 +04:00
typedef enum zfs_smb_acl_op {
ZFS_SMB_ACL_ADD,
ZFS_SMB_ACL_REMOVE,
ZFS_SMB_ACL_RENAME,
ZFS_SMB_ACL_PURGE
} zfs_smb_acl_op_t;
typedef enum zfs_cache_type {
ZFS_CACHE_NONE = 0,
ZFS_CACHE_METADATA = 1,
ZFS_CACHE_ALL = 2
} zfs_cache_type_t;
typedef enum {
ZFS_SYNC_STANDARD = 0,
ZFS_SYNC_ALWAYS = 1,
ZFS_SYNC_DISABLED = 2
} zfs_sync_type_t;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
typedef enum {
ZFS_XATTR_OFF = 0,
ZFS_XATTR_DIR = 1,
ZFS_XATTR_SA = 2
} zfs_xattr_type_t;
2008-11-20 23:01:55 +03:00
/*
* On-disk version number.
*/
#define SPA_VERSION_1 1ULL
#define SPA_VERSION_2 2ULL
#define SPA_VERSION_3 3ULL
#define SPA_VERSION_4 4ULL
#define SPA_VERSION_5 5ULL
#define SPA_VERSION_6 6ULL
#define SPA_VERSION_7 7ULL
#define SPA_VERSION_8 8ULL
#define SPA_VERSION_9 9ULL
#define SPA_VERSION_10 10ULL
#define SPA_VERSION_11 11ULL
#define SPA_VERSION_12 12ULL
#define SPA_VERSION_13 13ULL
#define SPA_VERSION_14 14ULL
2009-07-03 02:44:48 +04:00
#define SPA_VERSION_15 15ULL
#define SPA_VERSION_16 16ULL
2009-08-18 22:43:27 +04:00
#define SPA_VERSION_17 17ULL
#define SPA_VERSION_18 18ULL
#define SPA_VERSION_19 19ULL
#define SPA_VERSION_20 20ULL
#define SPA_VERSION_21 21ULL
#define SPA_VERSION_22 22ULL
#define SPA_VERSION_23 23ULL
#define SPA_VERSION_24 24ULL
#define SPA_VERSION_25 25ULL
#define SPA_VERSION_26 26ULL
#define SPA_VERSION_27 27ULL
#define SPA_VERSION_28 28ULL
#define SPA_VERSION_5000 5000ULL
2008-11-20 23:01:55 +03:00
/*
* When bumping up SPA_VERSION, make sure GRUB ZFS understands the on-disk
2009-07-03 02:44:48 +04:00
* format change. Go to usr/src/grub/grub-0.97/stage2/{zfs-include/, fsys_zfs*},
* and do the appropriate changes. Also bump the version number in
* usr/src/grub/capability.
2008-11-20 23:01:55 +03:00
*/
#define SPA_VERSION SPA_VERSION_5000
#define SPA_VERSION_STRING "5000"
2008-11-20 23:01:55 +03:00
/*
* Symbolic names for the changes that caused a SPA_VERSION switch.
* Used in the code when checking for presence or absence of a feature.
* Feel free to define multiple symbolic names for each version if there
* were multiple changes to on-disk structures during that version.
*
* NOTE: When checking the current SPA_VERSION in your code, be sure
* to use spa_version() since it reports the version of the
* last synced uberblock. Checking the in-flight version can
* be dangerous in some cases.
*/
#define SPA_VERSION_INITIAL SPA_VERSION_1
#define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2
#define SPA_VERSION_SPARES SPA_VERSION_3
2009-08-18 22:43:27 +04:00
#define SPA_VERSION_RAIDZ2 SPA_VERSION_3
#define SPA_VERSION_BPOBJ_ACCOUNT SPA_VERSION_3
2008-11-20 23:01:55 +03:00
#define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3
#define SPA_VERSION_DNODE_BYTES SPA_VERSION_3
#define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4
#define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5
#define SPA_VERSION_BOOTFS SPA_VERSION_6
#define SPA_VERSION_SLOGS SPA_VERSION_7
#define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8
#define SPA_VERSION_FUID SPA_VERSION_9
#define SPA_VERSION_REFRESERVATION SPA_VERSION_9
#define SPA_VERSION_REFQUOTA SPA_VERSION_9
#define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9
#define SPA_VERSION_L2CACHE SPA_VERSION_10
#define SPA_VERSION_NEXT_CLONES SPA_VERSION_11
#define SPA_VERSION_ORIGIN SPA_VERSION_11
#define SPA_VERSION_DSL_SCRUB SPA_VERSION_11
#define SPA_VERSION_SNAP_PROPS SPA_VERSION_12
#define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13
#define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14
2009-07-03 02:44:48 +04:00
#define SPA_VERSION_USERSPACE SPA_VERSION_15
#define SPA_VERSION_STMF_PROP SPA_VERSION_16
2009-08-18 22:43:27 +04:00
#define SPA_VERSION_RAIDZ3 SPA_VERSION_17
#define SPA_VERSION_USERREFS SPA_VERSION_18
#define SPA_VERSION_HOLES SPA_VERSION_19
#define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20
#define SPA_VERSION_DEDUP SPA_VERSION_21
#define SPA_VERSION_RECVD_PROPS SPA_VERSION_22
#define SPA_VERSION_SLIM_ZIL SPA_VERSION_23
#define SPA_VERSION_SA SPA_VERSION_24
#define SPA_VERSION_SCAN SPA_VERSION_25
#define SPA_VERSION_DIR_CLONES SPA_VERSION_26
#define SPA_VERSION_DEADLISTS SPA_VERSION_26
#define SPA_VERSION_FAST_SNAP SPA_VERSION_27
#define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28
#define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28
#define SPA_VERSION_FEATURES SPA_VERSION_5000
#define SPA_VERSION_IS_SUPPORTED(v) \
(((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \
((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION))
2008-11-20 23:01:55 +03:00
/*
* ZPL version - rev'd whenever an incompatible on-disk format change
* occurs. This is independent of SPA/DMU/ZAP versioning. You must
* also update the version_table[] and help message in zfs_prop.c.
*
* When changing, be sure to teach GRUB how to read the new format!
2009-07-03 02:44:48 +04:00
* See usr/src/grub/grub-0.97/stage2/{zfs-include/,fsys_zfs*}
2008-11-20 23:01:55 +03:00
*/
#define ZPL_VERSION_1 1ULL
#define ZPL_VERSION_2 2ULL
#define ZPL_VERSION_3 3ULL
2009-07-03 02:44:48 +04:00
#define ZPL_VERSION_4 4ULL
#define ZPL_VERSION_5 5ULL
#define ZPL_VERSION ZPL_VERSION_5
#define ZPL_VERSION_STRING "5"
2008-11-20 23:01:55 +03:00
#define ZPL_VERSION_INITIAL ZPL_VERSION_1
#define ZPL_VERSION_DIRENT_TYPE ZPL_VERSION_2
#define ZPL_VERSION_FUID ZPL_VERSION_3
#define ZPL_VERSION_NORMALIZATION ZPL_VERSION_3
#define ZPL_VERSION_SYSATTR ZPL_VERSION_3
2009-07-03 02:44:48 +04:00
#define ZPL_VERSION_USERSPACE ZPL_VERSION_4
#define ZPL_VERSION_SA ZPL_VERSION_5
/* Rewind request information */
#define ZPOOL_NO_REWIND 1 /* No policy - default behavior */
#define ZPOOL_NEVER_REWIND 2 /* Do not search for best txg or rewind */
#define ZPOOL_TRY_REWIND 4 /* Search for best txg, but do not rewind */
#define ZPOOL_DO_REWIND 8 /* Rewind to best txg w/in deferred frees */
#define ZPOOL_EXTREME_REWIND 16 /* Allow extreme measures to find best txg */
#define ZPOOL_REWIND_MASK 28 /* All the possible rewind bits */
#define ZPOOL_REWIND_POLICIES 31 /* All the possible policy bits */
typedef struct zpool_rewind_policy {
uint32_t zrp_request; /* rewind behavior requested */
uint64_t zrp_maxmeta; /* max acceptable meta-data errors */
uint64_t zrp_maxdata; /* max acceptable data errors */
uint64_t zrp_txg; /* specific txg to load */
} zpool_rewind_policy_t;
2008-11-20 23:01:55 +03:00
/*
* The following are configuration names used in the nvlist describing a pool's
* configuration.
*/
#define ZPOOL_CONFIG_VERSION "version"
#define ZPOOL_CONFIG_POOL_NAME "name"
#define ZPOOL_CONFIG_POOL_STATE "state"
#define ZPOOL_CONFIG_POOL_TXG "txg"
#define ZPOOL_CONFIG_POOL_GUID "pool_guid"
#define ZPOOL_CONFIG_CREATE_TXG "create_txg"
#define ZPOOL_CONFIG_TOP_GUID "top_guid"
#define ZPOOL_CONFIG_VDEV_TREE "vdev_tree"
#define ZPOOL_CONFIG_TYPE "type"
#define ZPOOL_CONFIG_CHILDREN "children"
#define ZPOOL_CONFIG_ID "id"
#define ZPOOL_CONFIG_GUID "guid"
#define ZPOOL_CONFIG_PATH "path"
#define ZPOOL_CONFIG_DEVID "devid"
#define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array"
#define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift"
#define ZPOOL_CONFIG_ASHIFT "ashift"
#define ZPOOL_CONFIG_ASIZE "asize"
#define ZPOOL_CONFIG_DTL "DTL"
#define ZPOOL_CONFIG_SCAN_STATS "scan_stats" /* not stored on disk */
#define ZPOOL_CONFIG_VDEV_STATS "vdev_stats" /* not stored on disk */
2008-11-20 23:01:55 +03:00
#define ZPOOL_CONFIG_WHOLE_DISK "whole_disk"
#define ZPOOL_CONFIG_ERRCOUNT "error_count"
#define ZPOOL_CONFIG_NOT_PRESENT "not_present"
#define ZPOOL_CONFIG_SPARES "spares"
#define ZPOOL_CONFIG_IS_SPARE "is_spare"
#define ZPOOL_CONFIG_NPARITY "nparity"
#define ZPOOL_CONFIG_HOSTID "hostid"
#define ZPOOL_CONFIG_HOSTNAME "hostname"
#define ZPOOL_CONFIG_LOADED_TIME "initial_load_time"
2008-11-20 23:01:55 +03:00
#define ZPOOL_CONFIG_UNSPARE "unspare"
#define ZPOOL_CONFIG_PHYS_PATH "phys_path"
#define ZPOOL_CONFIG_IS_LOG "is_log"
#define ZPOOL_CONFIG_L2CACHE "l2cache"
#define ZPOOL_CONFIG_HOLE_ARRAY "hole_array"
#define ZPOOL_CONFIG_VDEV_CHILDREN "vdev_children"
#define ZPOOL_CONFIG_IS_HOLE "is_hole"
#define ZPOOL_CONFIG_DDT_HISTOGRAM "ddt_histogram"
#define ZPOOL_CONFIG_DDT_OBJ_STATS "ddt_object_stats"
#define ZPOOL_CONFIG_DDT_STATS "ddt_stats"
#define ZPOOL_CONFIG_SPLIT "splitcfg"
#define ZPOOL_CONFIG_ORIG_GUID "orig_guid"
#define ZPOOL_CONFIG_SPLIT_GUID "split_guid"
#define ZPOOL_CONFIG_SPLIT_LIST "guid_list"
#define ZPOOL_CONFIG_REMOVING "removing"
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
#define ZPOOL_CONFIG_RESILVER_TXG "resilver_txg"
#define ZPOOL_CONFIG_COMMENT "comment"
#define ZPOOL_CONFIG_SUSPENDED "suspended" /* not stored on disk */
2008-11-20 23:01:55 +03:00
#define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */
#define ZPOOL_CONFIG_BOOTFS "bootfs" /* not stored on disk */
#define ZPOOL_CONFIG_MISSING_DEVICES "missing_vdevs" /* not stored on disk */
#define ZPOOL_CONFIG_LOAD_INFO "load_info" /* not stored on disk */
#define ZPOOL_CONFIG_REWIND_INFO "rewind_info" /* not stored on disk */
#define ZPOOL_CONFIG_UNSUP_FEAT "unsup_feat" /* not stored on disk */
#define ZPOOL_CONFIG_ENABLED_FEAT "enabled_feat" /* not stored on disk */
#define ZPOOL_CONFIG_CAN_RDONLY "can_rdonly" /* not stored on disk */
#define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read"
#define ZPOOL_CONFIG_FEATURE_STATS "feature_stats" /* not stored on disk */
2008-11-20 23:01:55 +03:00
/*
* The persistent vdev state is stored as separate values rather than a single
* 'vdev_state' entry. This is because a device can be in multiple states, such
* as offline and degraded.
*/
#define ZPOOL_CONFIG_OFFLINE "offline"
#define ZPOOL_CONFIG_FAULTED "faulted"
#define ZPOOL_CONFIG_DEGRADED "degraded"
#define ZPOOL_CONFIG_REMOVED "removed"
2009-07-03 02:44:48 +04:00
#define ZPOOL_CONFIG_FRU "fru"
#define ZPOOL_CONFIG_AUX_STATE "aux_state"
/* Rewind policy parameters */
#define ZPOOL_REWIND_POLICY "rewind-policy"
#define ZPOOL_REWIND_REQUEST "rewind-request"
#define ZPOOL_REWIND_REQUEST_TXG "rewind-request-txg"
#define ZPOOL_REWIND_META_THRESH "rewind-meta-thresh"
#define ZPOOL_REWIND_DATA_THRESH "rewind-data-thresh"
/* Rewind data discovered */
#define ZPOOL_CONFIG_LOAD_TIME "rewind_txg_ts"
#define ZPOOL_CONFIG_LOAD_DATA_ERRORS "verify_data_errors"
#define ZPOOL_CONFIG_REWIND_TIME "seconds_of_rewind"
2008-11-20 23:01:55 +03:00
#define VDEV_TYPE_ROOT "root"
#define VDEV_TYPE_MIRROR "mirror"
#define VDEV_TYPE_REPLACING "replacing"
#define VDEV_TYPE_RAIDZ "raidz"
#define VDEV_TYPE_DISK "disk"
#define VDEV_TYPE_FILE "file"
#define VDEV_TYPE_MISSING "missing"
#define VDEV_TYPE_HOLE "hole"
2008-11-20 23:01:55 +03:00
#define VDEV_TYPE_SPARE "spare"
#define VDEV_TYPE_LOG "log"
#define VDEV_TYPE_L2CACHE "l2cache"
/*
* This is needed in userland to report the minimum necessary device size.
*/
#define SPA_MINDEVSIZE (64ULL << 20)
/*
* The location of the pool configuration repository, shared between kernel and
* userland.
*/
#define ZPOOL_CACHE "/etc/zfs/zpool.cache"
2008-11-20 23:01:55 +03:00
/*
* vdev states are ordered from least to most healthy.
* A vdev that's CANT_OPEN or below is considered unusable.
*/
typedef enum vdev_state {
VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */
VDEV_STATE_CLOSED, /* Not currently open */
VDEV_STATE_OFFLINE, /* Not allowed to open */
VDEV_STATE_REMOVED, /* Explicitly removed from system */
VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */
VDEV_STATE_FAULTED, /* External request to fault device */
VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */
VDEV_STATE_HEALTHY /* Presumed good */
} vdev_state_t;
#define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY
/*
* vdev aux states. When a vdev is in the CANT_OPEN state, the aux field
* of the vdev stats structure uses these constants to distinguish why.
*/
typedef enum vdev_aux {
VDEV_AUX_NONE, /* no error */
VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */
VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */
VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */
VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */
VDEV_AUX_TOO_SMALL, /* vdev size is too small */
VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */
VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */
VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */
VDEV_AUX_UNSUP_FEAT, /* unsupported features */
2008-11-20 23:01:55 +03:00
VDEV_AUX_SPARED, /* hot spare used in another pool */
VDEV_AUX_ERR_EXCEEDED, /* too many errors */
VDEV_AUX_IO_FAILURE, /* experienced I/O failure */
VDEV_AUX_BAD_LOG, /* cannot read log chain(s) */
VDEV_AUX_EXTERNAL, /* external diagnosis */
VDEV_AUX_SPLIT_POOL /* vdev was split off into another pool */
2008-11-20 23:01:55 +03:00
} vdev_aux_t;
/*
* pool state. The following states are written to disk as part of the normal
* SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE, L2CACHE. The remaining
* states are software abstractions used at various levels to communicate
* pool state.
*/
typedef enum pool_state {
POOL_STATE_ACTIVE = 0, /* In active use */
POOL_STATE_EXPORTED, /* Explicitly exported */
POOL_STATE_DESTROYED, /* Explicitly destroyed */
POOL_STATE_SPARE, /* Reserved for hot spare use */
POOL_STATE_L2CACHE, /* Level 2 ARC device */
POOL_STATE_UNINITIALIZED, /* Internal spa_t state */
POOL_STATE_UNAVAIL, /* Internal libzfs state */
POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */
} pool_state_t;
/*
* Scan Functions.
2008-11-20 23:01:55 +03:00
*/
typedef enum pool_scan_func {
POOL_SCAN_NONE,
POOL_SCAN_SCRUB,
POOL_SCAN_RESILVER,
POOL_SCAN_FUNCS
} pool_scan_func_t;
2008-11-20 23:01:55 +03:00
/*
* ZIO types. Needed to interpret vdev statistics below.
*/
typedef enum zio_type {
ZIO_TYPE_NULL = 0,
ZIO_TYPE_READ,
ZIO_TYPE_WRITE,
ZIO_TYPE_FREE,
ZIO_TYPE_CLAIM,
ZIO_TYPE_IOCTL,
ZIO_TYPES
} zio_type_t;
/*
* Pool statistics. Note: all fields should be 64-bit because this
* is passed between kernel and userland as an nvlist uint64 array.
*/
typedef struct pool_scan_stat {
/* values stored on disk */
uint64_t pss_func; /* pool_scan_func_t */
uint64_t pss_state; /* dsl_scan_state_t */
uint64_t pss_start_time; /* scan start time */
uint64_t pss_end_time; /* scan end time */
uint64_t pss_to_examine; /* total bytes to scan */
uint64_t pss_examined; /* total examined bytes */
uint64_t pss_to_process; /* total bytes to process */
uint64_t pss_processed; /* total processed bytes */
uint64_t pss_errors; /* scan errors */
/* values not stored on disk */
uint64_t pss_pass_exam; /* examined bytes per scan pass */
uint64_t pss_pass_start; /* start time of a scan pass */
} pool_scan_stat_t;
typedef enum dsl_scan_state {
DSS_NONE,
DSS_SCANNING,
DSS_FINISHED,
DSS_CANCELED,
DSS_NUM_STATES
} dsl_scan_state_t;
2008-11-20 23:01:55 +03:00
/*
* Vdev statistics. Note: all fields should be 64-bit because this
* is passed between kernel and userland as an nvlist uint64 array.
*/
typedef struct vdev_stat {
hrtime_t vs_timestamp; /* time since vdev load */
uint64_t vs_state; /* vdev state */
uint64_t vs_aux; /* see vdev_aux_t */
uint64_t vs_alloc; /* space allocated */
uint64_t vs_space; /* total capacity */
uint64_t vs_dspace; /* deflated capacity */
uint64_t vs_rsize; /* replaceable dev size */
uint64_t vs_esize; /* expandable dev size */
2008-11-20 23:01:55 +03:00
uint64_t vs_ops[ZIO_TYPES]; /* operation count */
uint64_t vs_bytes[ZIO_TYPES]; /* bytes read/written */
uint64_t vs_read_errors; /* read errors */
uint64_t vs_write_errors; /* write errors */
uint64_t vs_checksum_errors; /* checksum errors */
uint64_t vs_self_healed; /* self-healed bytes */
uint64_t vs_scan_removing; /* removing? */
uint64_t vs_scan_processed; /* scan processed bytes */
2008-11-20 23:01:55 +03:00
} vdev_stat_t;
/*
* DDT statistics. Note: all fields should be 64-bit because this
* is passed between kernel and userland as an nvlist uint64 array.
*/
typedef struct ddt_object {
uint64_t ddo_count; /* number of elments in ddt */
uint64_t ddo_dspace; /* size of ddt on disk */
uint64_t ddo_mspace; /* size of ddt in-core */
} ddt_object_t;
typedef struct ddt_stat {
uint64_t dds_blocks; /* blocks */
uint64_t dds_lsize; /* logical size */
uint64_t dds_psize; /* physical size */
uint64_t dds_dsize; /* deflated allocated size */
uint64_t dds_ref_blocks; /* referenced blocks */
uint64_t dds_ref_lsize; /* referenced lsize * refcnt */
uint64_t dds_ref_psize; /* referenced psize * refcnt */
uint64_t dds_ref_dsize; /* referenced dsize * refcnt */
} ddt_stat_t;
typedef struct ddt_histogram {
ddt_stat_t ddh_stat[64]; /* power-of-two histogram buckets */
} ddt_histogram_t;
2008-11-20 23:01:55 +03:00
#define ZVOL_DRIVER "zvol"
#define ZFS_DRIVER "zfs"
#define ZFS_DEV "/dev/zfs"
/* general zvol path */
#define ZVOL_DIR "/dev"
#define ZVOL_MAJOR 230
#define ZVOL_MINOR_BITS 4
#define ZVOL_MINOR_MASK ((1U << ZVOL_MINOR_BITS) - 1)
#define ZVOL_MINORS (1 << 4)
#define ZVOL_DEV_NAME "zd"
2008-11-20 23:01:55 +03:00
#define ZVOL_PROP_NAME "name"
#define ZVOL_DEFAULT_BLOCKSIZE 8192
2008-11-20 23:01:55 +03:00
/*
* /dev/zfs ioctl numbers.
*/
typedef enum zfs_ioc {
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ZFS_IOC_FIRST = ('Z' << 8),
ZFS_IOC = ZFS_IOC_FIRST,
ZFS_IOC_POOL_CREATE = ZFS_IOC_FIRST,
2008-11-20 23:01:55 +03:00
ZFS_IOC_POOL_DESTROY,
ZFS_IOC_POOL_IMPORT,
ZFS_IOC_POOL_EXPORT,
ZFS_IOC_POOL_CONFIGS,
ZFS_IOC_POOL_STATS,
ZFS_IOC_POOL_TRYIMPORT,
ZFS_IOC_POOL_SCAN,
2008-11-20 23:01:55 +03:00
ZFS_IOC_POOL_FREEZE,
ZFS_IOC_POOL_UPGRADE,
ZFS_IOC_POOL_GET_HISTORY,
ZFS_IOC_VDEV_ADD,
ZFS_IOC_VDEV_REMOVE,
ZFS_IOC_VDEV_SET_STATE,
ZFS_IOC_VDEV_ATTACH,
ZFS_IOC_VDEV_DETACH,
ZFS_IOC_VDEV_SETPATH,
2009-07-03 02:44:48 +04:00
ZFS_IOC_VDEV_SETFRU,
2008-11-20 23:01:55 +03:00
ZFS_IOC_OBJSET_STATS,
ZFS_IOC_OBJSET_ZPLPROPS,
ZFS_IOC_DATASET_LIST_NEXT,
ZFS_IOC_SNAPSHOT_LIST_NEXT,
ZFS_IOC_SET_PROP,
ZFS_IOC_CREATE,
ZFS_IOC_DESTROY,
ZFS_IOC_ROLLBACK,
ZFS_IOC_RENAME,
ZFS_IOC_RECV,
ZFS_IOC_SEND,
ZFS_IOC_INJECT_FAULT,
ZFS_IOC_CLEAR_FAULT,
ZFS_IOC_INJECT_LIST_NEXT,
ZFS_IOC_ERROR_LOG,
ZFS_IOC_CLEAR,
ZFS_IOC_PROMOTE,
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ZFS_IOC_DESTROY_SNAPS,
2008-11-20 23:01:55 +03:00
ZFS_IOC_SNAPSHOT,
ZFS_IOC_DSOBJ_TO_DSNAME,
ZFS_IOC_OBJ_TO_PATH,
ZFS_IOC_POOL_SET_PROPS,
ZFS_IOC_POOL_GET_PROPS,
ZFS_IOC_SET_FSACL,
ZFS_IOC_GET_FSACL,
ZFS_IOC_SHARE,
2009-07-03 02:44:48 +04:00
ZFS_IOC_INHERIT_PROP,
ZFS_IOC_SMB_ACL,
ZFS_IOC_USERSPACE_ONE,
ZFS_IOC_USERSPACE_MANY,
2009-08-18 22:43:27 +04:00
ZFS_IOC_USERSPACE_UPGRADE,
ZFS_IOC_HOLD,
ZFS_IOC_RELEASE,
ZFS_IOC_GET_HOLDS,
ZFS_IOC_OBJSET_RECVD_PROPS,
ZFS_IOC_VDEV_SPLIT,
ZFS_IOC_NEXT_OBJ,
ZFS_IOC_DIFF,
ZFS_IOC_TMP_SNAPSHOT,
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 22:42:43 +04:00
ZFS_IOC_OBJ_TO_STATS,
ZFS_IOC_EVENTS_NEXT,
ZFS_IOC_EVENTS_CLEAR,
ZFS_IOC_POOL_REGUID,
ZFS_IOC_SPACE_WRITTEN,
ZFS_IOC_SPACE_SNAPS,
ZFS_IOC_POOL_REOPEN,
ZFS_IOC_SEND_PROGRESS,
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ZFS_IOC_LOG_HISTORY,
ZFS_IOC_SEND_NEW,
ZFS_IOC_SEND_SPACE,
ZFS_IOC_CLONE,
ZFS_IOC_LAST
2008-11-20 23:01:55 +03:00
} zfs_ioc_t;
/*
* zvol ioctl to get dataset name
*/
#define BLKZNAME _IOR(0x12,125,char[ZFS_MAXNAMELEN])
2008-11-20 23:01:55 +03:00
/*
* Internal SPA load state. Used by FMA diagnosis engine.
*/
typedef enum {
SPA_LOAD_NONE, /* no load in progress */
SPA_LOAD_OPEN, /* normal open */
SPA_LOAD_IMPORT, /* import in progress */
SPA_LOAD_TRYIMPORT, /* tryimport in progress */
SPA_LOAD_RECOVER, /* recovery requested */
SPA_LOAD_ERROR /* load failed */
2008-11-20 23:01:55 +03:00
} spa_load_state_t;
/*
* Bookmark name values.
*/
#define ZPOOL_ERR_LIST "error list"
#define ZPOOL_ERR_DATASET "dataset"
#define ZPOOL_ERR_OBJECT "object"
#define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1)
/*
* The following are names used in the nvlist describing
* the pool's history log.
*/
#define ZPOOL_HIST_RECORD "history record"
#define ZPOOL_HIST_TIME "history time"
#define ZPOOL_HIST_CMD "history command"
#define ZPOOL_HIST_WHO "history who"
#define ZPOOL_HIST_ZONE "history zone"
#define ZPOOL_HIST_HOST "history hostname"
#define ZPOOL_HIST_TXG "history txg"
#define ZPOOL_HIST_INT_EVENT "history internal event"
#define ZPOOL_HIST_INT_STR "history internal str"
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
#define ZPOOL_HIST_INT_NAME "internal_name"
#define ZPOOL_HIST_IOCTL "ioctl"
#define ZPOOL_HIST_INPUT_NVL "in_nvl"
#define ZPOOL_HIST_OUTPUT_NVL "out_nvl"
#define ZPOOL_HIST_DSNAME "dsname"
#define ZPOOL_HIST_DSID "dsid"
2008-11-20 23:01:55 +03:00
/*
* Flags for ZFS_IOC_VDEV_SET_STATE
*/
#define ZFS_ONLINE_CHECKREMOVE 0x1
#define ZFS_ONLINE_UNSPARE 0x2
#define ZFS_ONLINE_FORCEFAULT 0x4
2009-07-03 02:44:48 +04:00
#define ZFS_ONLINE_EXPAND 0x8
2008-11-20 23:01:55 +03:00
#define ZFS_OFFLINE_TEMPORARY 0x1
/*
* Flags for ZFS_IOC_POOL_IMPORT
*/
#define ZFS_IMPORT_NORMAL 0x0
#define ZFS_IMPORT_VERBATIM 0x1
#define ZFS_IMPORT_ANY_HOST 0x2
#define ZFS_IMPORT_MISSING_LOG 0x4
#define ZFS_IMPORT_ONLY 0x8
2008-11-20 23:01:55 +03:00
/*
* Sysevent payload members. ZFS will generate the following sysevents with the
* given payloads:
*
* ESC_ZFS_RESILVER_START
* ESC_ZFS_RESILVER_END
* ESC_ZFS_POOL_DESTROY
* ESC_ZFS_POOL_REGUID
2008-11-20 23:01:55 +03:00
*
* ZFS_EV_POOL_NAME DATA_TYPE_STRING
* ZFS_EV_POOL_GUID DATA_TYPE_UINT64
*
* ESC_ZFS_VDEV_REMOVE
* ESC_ZFS_VDEV_CLEAR
* ESC_ZFS_VDEV_CHECK
*
* ZFS_EV_POOL_NAME DATA_TYPE_STRING
* ZFS_EV_POOL_GUID DATA_TYPE_UINT64
* ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional)
* ZFS_EV_VDEV_GUID DATA_TYPE_UINT64
*/
#define ZFS_EV_POOL_NAME "pool_name"
#define ZFS_EV_POOL_GUID "pool_guid"
#define ZFS_EV_VDEV_PATH "vdev_path"
#define ZFS_EV_VDEV_GUID "vdev_guid"
#ifdef __cplusplus
}
#endif
#endif /* _SYS_FS_ZFS_H */