c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 10:01:01 +03:00
Code Issues Packages Projects Releases Wiki Activity
b37f29341b
mirror_zfs/config/kernel-inode-times.m4

94 lines
2.1 KiB
Plaintext
Raw Normal View History

Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_INODE_TIMES], [
Linux 5.6 compat: timestamp_truncate() The timestamp_truncate() function was added, it replaces the existing timespec64_trunc() function. This change renames our wrapper function to be consistent with the upstream name and updates the compatibility code for older kernels accordingly. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9956 Closes #9961
2020-02-06 23:37:25 +03:00
dnl #
dnl # 5.6 API change
dnl # timespec64_trunc() replaced by timestamp_truncate() interface.
dnl #
ZFS_LINUX_TEST_SRC([timestamp_truncate], [
#include <linux/fs.h>
],[
struct timespec64 ts;
struct inode ip;
config/kernel-inode-times: initialize timespec Usage of this variable uninitialized triggers -Werror,-Wuninitialized when compiled under clang for linux kernel 5.6, leading the build system to believe that the function is not declared. This commit initializes the variable to suppress the warning and fix the build for kernel 5.6 with clang. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Hiếu Lê <leorize+oss@disroot.org> Closes #10279 Closes #10281
2020-05-05 01:25:48 +03:00
memset(&ts, 0, sizeof(ts));
Linux 5.6 compat: timestamp_truncate() The timestamp_truncate() function was added, it replaces the existing timespec64_trunc() function. This change renames our wrapper function to be consistent with the upstream name and updates the compatibility code for older kernels accordingly. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9956 Closes #9961
2020-02-06 23:37:25 +03:00
ts = timestamp_truncate(ts, &ip);
])
dnl #
dnl # 4.18 API change
dnl # i_atime, i_mtime, and i_ctime changed from timespec to timespec64.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_SRC([inode_times], [
Linux 4.18 compat: inode timespec -> timespec64 Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime, and i_ctime members form timespec's to timespec64's to make them 2038 safe. As part of this change the current_time() function was also updated to return the timespec64 type. Resolve this issue by introducing a new inode_timespec_t type which is defined to match the timespec type used by the inode. It should be used when working with inode timestamps to ensure matching types. The timestruc_t type under Illumos was used in a similar fashion but was specified to always be a timespec_t. Rather than incorrectly define this type all timespec_t types have been replaced by the new inode_timespec_t type. Finally, the kernel and user space 'sys/time.h' headers were aligned with each other. They define as appropriate for the context several constants as macros and include static inline implementation of gethrestime(), gethrestime_sec(), and gethrtime(). Reviewed-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7643
2018-06-20 07:51:18 +03:00
#include <linux/fs.h>
],[
struct inode ip;
struct timespec ts;
memset(&ip, 0, sizeof(ip));
ts = ip.i_mtime;
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
])
Linux 6.6 compat: use inode_get/set_ctime*(...) In Linux commit 13bc24457850583a2e7203ded05b7209ab4bc5ef, direct access to the i_ctime member of struct inode was removed. The new approach is to use accessor methods that exclusively handle passing the timestamp around by value. This change adds new tests for each of these functions and introduces zpl_* equivalents in include/os/linux/zfs/sys/zpl.h. In where the inode_get/set_ctime*() functions exist, these zpl_* calls will be mapped to the new functions. On older kernels, these macros just wrap direct-access calls. The code that operated on an address of ip->i_ctime to call ZFS_TIME_DECODE() now will take a local copy using zpl_inode_get_ctime(), and then pass the address of the local copy when performing the ZFS_TIME_DECODE() call, in all cases, rather than directly accessing the member. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #15263 Closes #15257
2023-09-12 06:21:29 +03:00
dnl #
dnl # 6.6 API change
dnl # i_ctime no longer directly accessible, must use
dnl # inode_get_ctime(ip), inode_set_ctime*(ip) to
dnl # read/write.
dnl #
ZFS_LINUX_TEST_SRC([inode_get_ctime], [
#include <linux/fs.h>
],[
struct inode ip;
memset(&ip, 0, sizeof(ip));
inode_get_ctime(&ip);
])
ZFS_LINUX_TEST_SRC([inode_set_ctime_to_ts], [
#include <linux/fs.h>
],[
struct inode ip;
struct timespec64 ts;
memset(&ip, 0, sizeof(ip));
inode_set_ctime_to_ts(&ip, ts);
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
])
AC_DEFUN([ZFS_AC_KERNEL_INODE_TIMES], [
Linux 5.6 compat: timestamp_truncate() The timestamp_truncate() function was added, it replaces the existing timespec64_trunc() function. This change renames our wrapper function to be consistent with the upstream name and updates the compatibility code for older kernels accordingly. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9956 Closes #9961
2020-02-06 23:37:25 +03:00
AC_MSG_CHECKING([whether timestamp_truncate() exists])
ZFS_LINUX_TEST_RESULT([timestamp_truncate], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_INODE_TIMESTAMP_TRUNCATE, 1,
[timestamp_truncate() exists])
],[
AC_MSG_RESULT(no)
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_MSG_CHECKING([whether inode->i_*time's are timespec64])
ZFS_LINUX_TEST_RESULT([inode_times], [
Linux 4.18 compat: inode timespec -> timespec64 Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime, and i_ctime members form timespec's to timespec64's to make them 2038 safe. As part of this change the current_time() function was also updated to return the timespec64 type. Resolve this issue by introducing a new inode_timespec_t type which is defined to match the timespec type used by the inode. It should be used when working with inode timestamps to ensure matching types. The timestruc_t type under Illumos was used in a similar fashion but was specified to always be a timespec_t. Rather than incorrectly define this type all timespec_t types have been replaced by the new inode_timespec_t type. Finally, the kernel and user space 'sys/time.h' headers were aligned with each other. They define as appropriate for the context several constants as macros and include static inline implementation of gethrestime(), gethrestime_sec(), and gethrtime(). Reviewed-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7643
2018-06-20 07:51:18 +03:00
AC_MSG_RESULT(no)
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_INODE_TIMESPEC64_TIMES, 1,
[inode->i_*time's are timespec64])
])
Linux 6.6 compat: use inode_get/set_ctime*(...) In Linux commit 13bc24457850583a2e7203ded05b7209ab4bc5ef, direct access to the i_ctime member of struct inode was removed. The new approach is to use accessor methods that exclusively handle passing the timestamp around by value. This change adds new tests for each of these functions and introduces zpl_* equivalents in include/os/linux/zfs/sys/zpl.h. In where the inode_get/set_ctime*() functions exist, these zpl_* calls will be mapped to the new functions. On older kernels, these macros just wrap direct-access calls. The code that operated on an address of ip->i_ctime to call ZFS_TIME_DECODE() now will take a local copy using zpl_inode_get_ctime(), and then pass the address of the local copy when performing the ZFS_TIME_DECODE() call, in all cases, rather than directly accessing the member. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #15263 Closes #15257
2023-09-12 06:21:29 +03:00
AC_MSG_CHECKING([whether inode_get_ctime() exists])
ZFS_LINUX_TEST_RESULT([inode_get_ctime], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_INODE_GET_CTIME, 1,
[inode_get_ctime() exists in linux/fs.h])
],[
AC_MSG_RESULT(no)
])
AC_MSG_CHECKING([whether inode_set_ctime_to_ts() exists])
ZFS_LINUX_TEST_RESULT([inode_set_ctime_to_ts], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_INODE_SET_CTIME_TO_TS, 1,
[inode_set_ctime_to_ts() exists in linux/fs.h])
],[
AC_MSG_RESULT(no)
])
Linux 4.18 compat: inode timespec -> timespec64 Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime, and i_ctime members form timespec's to timespec64's to make them 2038 safe. As part of this change the current_time() function was also updated to return the timespec64 type. Resolve this issue by introducing a new inode_timespec_t type which is defined to match the timespec type used by the inode. It should be used when working with inode timestamps to ensure matching types. The timestruc_t type under Illumos was used in a similar fashion but was specified to always be a timespec_t. Rather than incorrectly define this type all timespec_t types have been replaced by the new inode_timespec_t type. Finally, the kernel and user space 'sys/time.h' headers were aligned with each other. They define as appropriate for the context several constants as macros and include static inline implementation of gethrestime(), gethrestime_sec(), and gethrtime(). Reviewed-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7643
2018-06-20 07:51:18 +03:00
])
Reference in New Issue Copy Permalink