mirror_zfs/module/zfs/dsl_destroy.c

1282 lines
36 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012, 2018 by Delphix. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
* Copyright (c) 2013 by Joyent, Inc. All rights reserved.
* Copyright (c) 2016 Actifio, Inc. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/dsl_userhold.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_synctask.h>
#include <sys/dsl_destroy.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
#include <sys/dsl_bookmark.h>
#include <sys/dmu_tx.h>
#include <sys/dsl_pool.h>
#include <sys/dsl_dir.h>
#include <sys/dmu_traverse.h>
#include <sys/dsl_scan.h>
#include <sys/dmu_objset.h>
#include <sys/zap.h>
#include <sys/zfeature.h>
#include <sys/zfs_ioctl.h>
#include <sys/dsl_deleg.h>
#include <sys/dmu_impl.h>
#include <sys/zvol.h>
#include <sys/zcp.h>
#include <sys/dsl_deadlist.h>
#include <sys/zthr.h>
#include <sys/spa_impl.h>
int
dsl_destroy_snapshot_check_impl(dsl_dataset_t *ds, boolean_t defer)
{
if (!ds->ds_is_snapshot)
return (SET_ERROR(EINVAL));
if (dsl_dataset_long_held(ds))
return (SET_ERROR(EBUSY));
/*
* Only allow deferred destroy on pools that support it.
* NOTE: deferred destroy is only supported on snapshots.
*/
if (defer) {
if (spa_version(ds->ds_dir->dd_pool->dp_spa) <
SPA_VERSION_USERREFS)
return (SET_ERROR(ENOTSUP));
return (0);
}
/*
* If this snapshot has an elevated user reference count,
* we can't destroy it yet.
*/
if (ds->ds_userrefs > 0)
return (SET_ERROR(EBUSY));
/*
* Can't delete a branch point.
*/
if (dsl_dataset_phys(ds)->ds_num_children > 1)
return (SET_ERROR(EEXIST));
return (0);
}
int
dsl_destroy_snapshot_check(void *arg, dmu_tx_t *tx)
{
dsl_destroy_snapshot_arg_t *ddsa = arg;
const char *dsname = ddsa->ddsa_name;
boolean_t defer = ddsa->ddsa_defer;
dsl_pool_t *dp = dmu_tx_pool(tx);
int error = 0;
dsl_dataset_t *ds;
error = dsl_dataset_hold(dp, dsname, FTAG, &ds);
/*
* If the snapshot does not exist, silently ignore it, and
* dsl_destroy_snapshot_sync() will be a no-op
* (it's "already destroyed").
*/
if (error == ENOENT)
return (0);
if (error == 0) {
error = dsl_destroy_snapshot_check_impl(ds, defer);
dsl_dataset_rele(ds, FTAG);
}
return (error);
}
struct process_old_arg {
dsl_dataset_t *ds;
dsl_dataset_t *ds_prev;
boolean_t after_branch_point;
zio_t *pio;
uint64_t used, comp, uncomp;
};
static int
process_old_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed, dmu_tx_t *tx)
{
struct process_old_arg *poa = arg;
dsl_pool_t *dp = poa->ds->ds_dir->dd_pool;
ASSERT(!BP_IS_HOLE(bp));
if (bp->blk_birth <= dsl_dataset_phys(poa->ds)->ds_prev_snap_txg) {
dsl_deadlist_insert(&poa->ds->ds_deadlist, bp, bp_freed, tx);
if (poa->ds_prev && !poa->after_branch_point &&
bp->blk_birth >
dsl_dataset_phys(poa->ds_prev)->ds_prev_snap_txg) {
dsl_dataset_phys(poa->ds_prev)->ds_unique_bytes +=
bp_get_dsize_sync(dp->dp_spa, bp);
}
} else {
poa->used += bp_get_dsize_sync(dp->dp_spa, bp);
poa->comp += BP_GET_PSIZE(bp);
poa->uncomp += BP_GET_UCSIZE(bp);
dsl_free_sync(poa->pio, dp, tx->tx_txg, bp);
}
return (0);
}
static void
process_old_deadlist(dsl_dataset_t *ds, dsl_dataset_t *ds_prev,
dsl_dataset_t *ds_next, boolean_t after_branch_point, dmu_tx_t *tx)
{
struct process_old_arg poa = { 0 };
dsl_pool_t *dp = ds->ds_dir->dd_pool;
objset_t *mos = dp->dp_meta_objset;
uint64_t deadlist_obj;
ASSERT(ds->ds_deadlist.dl_oldfmt);
ASSERT(ds_next->ds_deadlist.dl_oldfmt);
poa.ds = ds;
poa.ds_prev = ds_prev;
poa.after_branch_point = after_branch_point;
poa.pio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED);
VERIFY0(bpobj_iterate(&ds_next->ds_deadlist.dl_bpobj,
process_old_cb, &poa, tx));
VERIFY0(zio_wait(poa.pio));
ASSERT3U(poa.used, ==, dsl_dataset_phys(ds)->ds_unique_bytes);
/* change snapused */
dsl_dir_diduse_space(ds->ds_dir, DD_USED_SNAP,
-poa.used, -poa.comp, -poa.uncomp, tx);
/* swap next's deadlist to our deadlist */
dsl_deadlist_close(&ds->ds_deadlist);
dsl_deadlist_close(&ds_next->ds_deadlist);
deadlist_obj = dsl_dataset_phys(ds)->ds_deadlist_obj;
dsl_dataset_phys(ds)->ds_deadlist_obj =
dsl_dataset_phys(ds_next)->ds_deadlist_obj;
dsl_dataset_phys(ds_next)->ds_deadlist_obj = deadlist_obj;
dsl_deadlist_open(&ds->ds_deadlist, mos,
dsl_dataset_phys(ds)->ds_deadlist_obj);
dsl_deadlist_open(&ds_next->ds_deadlist, mos,
dsl_dataset_phys(ds_next)->ds_deadlist_obj);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
typedef struct remaining_clones_key {
dsl_dataset_t *rck_clone;
list_node_t rck_node;
} remaining_clones_key_t;
static remaining_clones_key_t *
rck_alloc(dsl_dataset_t *clone)
{
remaining_clones_key_t *rck = kmem_alloc(sizeof (*rck), KM_SLEEP);
rck->rck_clone = clone;
return (rck);
}
static void
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dsl_dir_remove_clones_key_impl(dsl_dir_t *dd, uint64_t mintxg, dmu_tx_t *tx,
list_t *stack, void *tag)
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
objset_t *mos = dd->dd_pool->dp_meta_objset;
/*
* If it is the old version, dd_clones doesn't exist so we can't
* find the clones, but dsl_deadlist_remove_key() is a no-op so it
* doesn't matter.
*/
if (dsl_dir_phys(dd)->dd_clones == 0)
return;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
zap_cursor_t *zc = kmem_alloc(sizeof (zap_cursor_t), KM_SLEEP);
zap_attribute_t *za = kmem_alloc(sizeof (zap_attribute_t), KM_SLEEP);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
for (zap_cursor_init(zc, mos, dsl_dir_phys(dd)->dd_clones);
zap_cursor_retrieve(zc, za) == 0;
zap_cursor_advance(zc)) {
dsl_dataset_t *clone;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
VERIFY0(dsl_dataset_hold_obj(dd->dd_pool,
za->za_first_integer, tag, &clone));
if (clone->ds_dir->dd_origin_txg > mintxg) {
dsl_deadlist_remove_key(&clone->ds_deadlist,
mintxg, tx);
if (dsl_dataset_remap_deadlist_exists(clone)) {
dsl_deadlist_remove_key(
&clone->ds_remap_deadlist, mintxg, tx);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
list_insert_head(stack, rck_alloc(clone));
} else {
dsl_dataset_rele(clone, tag);
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
zap_cursor_fini(zc);
kmem_free(za, sizeof (zap_attribute_t));
kmem_free(zc, sizeof (zap_cursor_t));
}
Reduce the stack usage of dsl_dataset_remove_clones_key dataset_remove_clones_key does recursion, so if the recursion goes deep it can overrun the linux kernel stack size of 8KB. I have seen this happen in the actual deployment, and subsequently confirmed it by running a test workload on a custom-built kernel that uses 32KB stack. See the following stack trace as an example of the case where it would have run over the 8KB stack kernel: Depth Size Location (42 entries) ----- ---- -------- 0) 11192 72 __kmalloc+0x2e/0x240 1) 11120 144 kmem_alloc_debug+0x20e/0x500 2) 10976 72 dbuf_hold_impl+0x4a/0xa0 3) 10904 120 dbuf_prefetch+0xd3/0x280 4) 10784 80 dmu_zfetch_dofetch.isra.5+0x10f/0x180 5) 10704 240 dmu_zfetch+0x5f7/0x10e0 6) 10464 168 dbuf_read+0x71e/0x8f0 7) 10296 104 dnode_hold_impl+0x1ee/0x620 8) 10192 16 dnode_hold+0x19/0x20 9) 10176 88 dmu_buf_hold+0x42/0x1b0 10) 10088 144 zap_lockdir+0x48/0x730 11) 9944 128 zap_cursor_retrieve+0x1c4/0x2f0 12) 9816 392 dsl_dataset_remove_clones_key.isra.14+0xab/0x190 13) 9424 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 14) 9032 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 15) 8640 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 16) 8248 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 17) 7856 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 18) 7464 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 19) 7072 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 20) 6680 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 21) 6288 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 22) 5896 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 23) 5504 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 24) 5112 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 25) 4720 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 26) 4328 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 27) 3936 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 28) 3544 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 29) 3152 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 30) 2760 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 31) 2368 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 32) 1976 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 33) 1584 392 dsl_dataset_remove_clones_key.isra.14+0x10c/0x190 34) 1192 232 dsl_dataset_destroy_sync+0x311/0xf60 35) 960 72 dsl_sync_task_group_sync+0x12f/0x230 36) 888 168 dsl_pool_sync+0x48b/0x5c0 37) 720 184 spa_sync+0x417/0xb00 38) 536 184 txg_sync_thread+0x325/0x5b0 39) 352 48 thread_generic_wrapper+0x7a/0x90 40) 304 128 kthread+0xc0/0xd0 41) 176 176 ret_from_fork+0x7c/0xb0 This change reduces the stack usage in dsl_dataset_remove_clones_key by allocating structures in heap, not in stack. This is not a fundamental fix, as one can create an arbitrary large data set that runs over any fixed size stack, but this will make the problem far less likely. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Kohsuke Kawaguchi <kk@kohsuke.org> Closes #1726
2013-09-26 02:14:47 +04:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
void
dsl_dir_remove_clones_key(dsl_dir_t *top_dd, uint64_t mintxg, dmu_tx_t *tx)
{
list_t stack;
list_create(&stack, sizeof (remaining_clones_key_t),
offsetof(remaining_clones_key_t, rck_node));
dsl_dir_remove_clones_key_impl(top_dd, mintxg, tx, &stack, FTAG);
for (remaining_clones_key_t *rck = list_remove_head(&stack);
rck != NULL; rck = list_remove_head(&stack)) {
dsl_dataset_t *clone = rck->rck_clone;
dsl_dir_t *clone_dir = clone->ds_dir;
kmem_free(rck, sizeof (*rck));
dsl_dir_remove_clones_key_impl(clone_dir, mintxg, tx,
&stack, FTAG);
dsl_dataset_rele(clone, FTAG);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
list_destroy(&stack);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static void
dsl_destroy_snapshot_handle_remaps(dsl_dataset_t *ds, dsl_dataset_t *ds_next,
dmu_tx_t *tx)
{
dsl_pool_t *dp = ds->ds_dir->dd_pool;
/* Move blocks to be obsoleted to pool's obsolete list. */
if (dsl_dataset_remap_deadlist_exists(ds_next)) {
if (!bpobj_is_open(&dp->dp_obsolete_bpobj))
dsl_pool_create_obsolete_bpobj(dp, tx);
dsl_deadlist_move_bpobj(&ds_next->ds_remap_deadlist,
&dp->dp_obsolete_bpobj,
dsl_dataset_phys(ds)->ds_prev_snap_txg, tx);
}
/* Merge our deadlist into next's and free it. */
if (dsl_dataset_remap_deadlist_exists(ds)) {
uint64_t remap_deadlist_object =
dsl_dataset_get_remap_deadlist_object(ds);
ASSERT(remap_deadlist_object != 0);
mutex_enter(&ds_next->ds_remap_deadlist_lock);
if (!dsl_dataset_remap_deadlist_exists(ds_next))
dsl_dataset_create_remap_deadlist(ds_next, tx);
mutex_exit(&ds_next->ds_remap_deadlist_lock);
dsl_deadlist_merge(&ds_next->ds_remap_deadlist,
remap_deadlist_object, tx);
dsl_dataset_destroy_remap_deadlist(ds, tx);
}
}
void
dsl_destroy_snapshot_sync_impl(dsl_dataset_t *ds, boolean_t defer, dmu_tx_t *tx)
{
int after_branch_point = FALSE;
dsl_pool_t *dp = ds->ds_dir->dd_pool;
objset_t *mos = dp->dp_meta_objset;
dsl_dataset_t *ds_prev = NULL;
uint64_t obj;
ASSERT(RRW_WRITE_HELD(&dp->dp_config_rwlock));
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
ASSERT3U(dsl_dataset_phys(ds)->ds_bp.blk_birth, <=, tx->tx_txg);
rrw_exit(&ds->ds_bp_rwlock, FTAG);
ASSERT(zfs_refcount_is_zero(&ds->ds_longholds));
if (defer &&
(ds->ds_userrefs > 0 ||
dsl_dataset_phys(ds)->ds_num_children > 1)) {
ASSERT(spa_version(dp->dp_spa) >= SPA_VERSION_USERREFS);
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_flags |= DS_FLAG_DEFER_DESTROY;
spa_history_log_internal_ds(ds, "defer_destroy", tx, " ");
return;
}
ASSERT3U(dsl_dataset_phys(ds)->ds_num_children, <=, 1);
/* We need to log before removing it from the namespace. */
spa_history_log_internal_ds(ds, "destroy", tx, " ");
dsl_scan_ds_destroyed(ds, tx);
obj = ds->ds_object;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
boolean_t book_exists = dsl_bookmark_ds_destroyed(ds, tx);
for (spa_feature_t f = 0; f < SPA_FEATURES; f++) {
if (dsl_dataset_feature_is_active(ds, f))
dsl_dataset_deactivate_feature(ds, f, tx);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
}
if (dsl_dataset_phys(ds)->ds_prev_snap_obj != 0) {
ASSERT3P(ds->ds_prev, ==, NULL);
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &ds_prev));
after_branch_point =
(dsl_dataset_phys(ds_prev)->ds_next_snap_obj != obj);
dmu_buf_will_dirty(ds_prev->ds_dbuf, tx);
if (after_branch_point &&
dsl_dataset_phys(ds_prev)->ds_next_clones_obj != 0) {
dsl_dataset_remove_from_next_clones(ds_prev, obj, tx);
if (dsl_dataset_phys(ds)->ds_next_snap_obj != 0) {
VERIFY0(zap_add_int(mos,
dsl_dataset_phys(ds_prev)->
ds_next_clones_obj,
dsl_dataset_phys(ds)->ds_next_snap_obj,
tx));
}
}
if (!after_branch_point) {
dsl_dataset_phys(ds_prev)->ds_next_snap_obj =
dsl_dataset_phys(ds)->ds_next_snap_obj;
}
}
dsl_dataset_t *ds_next;
uint64_t old_unique;
uint64_t used = 0, comp = 0, uncomp = 0;
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds)->ds_next_snap_obj, FTAG, &ds_next));
ASSERT3U(dsl_dataset_phys(ds_next)->ds_prev_snap_obj, ==, obj);
old_unique = dsl_dataset_phys(ds_next)->ds_unique_bytes;
dmu_buf_will_dirty(ds_next->ds_dbuf, tx);
dsl_dataset_phys(ds_next)->ds_prev_snap_obj =
dsl_dataset_phys(ds)->ds_prev_snap_obj;
dsl_dataset_phys(ds_next)->ds_prev_snap_txg =
dsl_dataset_phys(ds)->ds_prev_snap_txg;
ASSERT3U(dsl_dataset_phys(ds)->ds_prev_snap_txg, ==,
ds_prev ? dsl_dataset_phys(ds_prev)->ds_creation_txg : 0);
if (ds_next->ds_deadlist.dl_oldfmt) {
process_old_deadlist(ds, ds_prev, ds_next,
after_branch_point, tx);
} else {
/* Adjust prev's unique space. */
if (ds_prev && !after_branch_point) {
dsl_deadlist_space_range(&ds_next->ds_deadlist,
dsl_dataset_phys(ds_prev)->ds_prev_snap_txg,
dsl_dataset_phys(ds)->ds_prev_snap_txg,
&used, &comp, &uncomp);
dsl_dataset_phys(ds_prev)->ds_unique_bytes += used;
}
/* Adjust snapused. */
dsl_deadlist_space_range(&ds_next->ds_deadlist,
dsl_dataset_phys(ds)->ds_prev_snap_txg, UINT64_MAX,
&used, &comp, &uncomp);
dsl_dir_diduse_space(ds->ds_dir, DD_USED_SNAP,
-used, -comp, -uncomp, tx);
/* Move blocks to be freed to pool's free list. */
dsl_deadlist_move_bpobj(&ds_next->ds_deadlist,
&dp->dp_free_bpobj, dsl_dataset_phys(ds)->ds_prev_snap_txg,
tx);
dsl_dir_diduse_space(tx->tx_pool->dp_free_dir,
DD_USED_HEAD, used, comp, uncomp, tx);
/* Merge our deadlist into next's and free it. */
dsl_deadlist_merge(&ds_next->ds_deadlist,
dsl_dataset_phys(ds)->ds_deadlist_obj, tx);
/*
* We are done with the deadlist tree (generated/used
* by dsl_deadlist_move_bpobj() and dsl_deadlist_merge()).
* Discard it to save memory.
*/
dsl_deadlist_discard_tree(&ds_next->ds_deadlist);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dsl_deadlist_close(&ds->ds_deadlist);
dsl_deadlist_free(mos, dsl_dataset_phys(ds)->ds_deadlist_obj, tx);
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_deadlist_obj = 0;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dsl_destroy_snapshot_handle_remaps(ds, ds_next, tx);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (!book_exists) {
/* Collapse range in clone heads */
dsl_dir_remove_clones_key(ds->ds_dir,
dsl_dataset_phys(ds)->ds_creation_txg, tx);
}
if (ds_next->ds_is_snapshot) {
dsl_dataset_t *ds_nextnext;
/*
* Update next's unique to include blocks which
* were previously shared by only this snapshot
* and it. Those blocks will be born after the
* prev snap and before this snap, and will have
* died after the next snap and before the one
* after that (ie. be on the snap after next's
* deadlist).
*/
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds_next)->ds_next_snap_obj,
FTAG, &ds_nextnext));
dsl_deadlist_space_range(&ds_nextnext->ds_deadlist,
dsl_dataset_phys(ds)->ds_prev_snap_txg,
dsl_dataset_phys(ds)->ds_creation_txg,
&used, &comp, &uncomp);
dsl_dataset_phys(ds_next)->ds_unique_bytes += used;
dsl_dataset_rele(ds_nextnext, FTAG);
ASSERT3P(ds_next->ds_prev, ==, NULL);
/* Collapse range in this head. */
dsl_dataset_t *hds;
VERIFY0(dsl_dataset_hold_obj(dp,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj,
FTAG, &hds));
if (!book_exists) {
/* Collapse range in this head. */
dsl_deadlist_remove_key(&hds->ds_deadlist,
dsl_dataset_phys(ds)->ds_creation_txg, tx);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (dsl_dataset_remap_deadlist_exists(hds)) {
dsl_deadlist_remove_key(&hds->ds_remap_deadlist,
dsl_dataset_phys(ds)->ds_creation_txg, tx);
}
dsl_dataset_rele(hds, FTAG);
} else {
ASSERT3P(ds_next->ds_prev, ==, ds);
dsl_dataset_rele(ds_next->ds_prev, ds_next);
ds_next->ds_prev = NULL;
if (ds_prev) {
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds)->ds_prev_snap_obj,
ds_next, &ds_next->ds_prev));
}
dsl_dataset_recalc_head_uniq(ds_next);
/*
* Reduce the amount of our unconsumed refreservation
* being charged to our parent by the amount of
* new unique data we have gained.
*/
if (old_unique < ds_next->ds_reserved) {
int64_t mrsdelta;
uint64_t new_unique =
dsl_dataset_phys(ds_next)->ds_unique_bytes;
ASSERT(old_unique <= new_unique);
mrsdelta = MIN(new_unique - old_unique,
ds_next->ds_reserved - old_unique);
dsl_dir_diduse_space(ds->ds_dir,
DD_USED_REFRSRV, -mrsdelta, 0, 0, tx);
}
}
dsl_dataset_rele(ds_next, FTAG);
/*
* This must be done after the dsl_traverse(), because it will
* re-open the objset.
*/
if (ds->ds_objset) {
dmu_objset_evict(ds->ds_objset);
ds->ds_objset = NULL;
}
/* remove from snapshot namespace */
dsl_dataset_t *ds_head;
ASSERT(dsl_dataset_phys(ds)->ds_snapnames_zapobj == 0);
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj, FTAG, &ds_head));
VERIFY0(dsl_dataset_get_snapname(ds));
#ifdef ZFS_DEBUG
{
uint64_t val;
int err;
err = dsl_dataset_snap_lookup(ds_head,
ds->ds_snapname, &val);
ASSERT0(err);
ASSERT3U(val, ==, obj);
}
#endif
VERIFY0(dsl_dataset_snap_remove(ds_head, ds->ds_snapname, tx, B_TRUE));
dsl_dataset_rele(ds_head, FTAG);
if (ds_prev != NULL)
dsl_dataset_rele(ds_prev, FTAG);
spa_prop_clear_bootfs(dp->dp_spa, ds->ds_object, tx);
if (dsl_dataset_phys(ds)->ds_next_clones_obj != 0) {
uint64_t count __maybe_unused;
ASSERT0(zap_count(mos,
dsl_dataset_phys(ds)->ds_next_clones_obj, &count) &&
count == 0);
VERIFY0(dmu_object_free(mos,
dsl_dataset_phys(ds)->ds_next_clones_obj, tx));
}
if (dsl_dataset_phys(ds)->ds_props_obj != 0)
VERIFY0(zap_destroy(mos, dsl_dataset_phys(ds)->ds_props_obj,
tx));
if (dsl_dataset_phys(ds)->ds_userrefs_obj != 0)
VERIFY0(zap_destroy(mos, dsl_dataset_phys(ds)->ds_userrefs_obj,
tx));
dsl_dir_rele(ds->ds_dir, ds);
ds->ds_dir = NULL;
dmu_object_free_zapified(mos, obj, tx);
}
void
dsl_destroy_snapshot_sync(void *arg, dmu_tx_t *tx)
{
dsl_destroy_snapshot_arg_t *ddsa = arg;
const char *dsname = ddsa->ddsa_name;
boolean_t defer = ddsa->ddsa_defer;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dataset_t *ds;
int error = dsl_dataset_hold(dp, dsname, FTAG, &ds);
if (error == ENOENT)
return;
ASSERT0(error);
dsl_destroy_snapshot_sync_impl(ds, defer, tx);
zvol_remove_minors(dp->dp_spa, dsname, B_TRUE);
dsl_dataset_rele(ds, FTAG);
}
/*
* The semantics of this function are described in the comment above
* lzc_destroy_snaps(). To summarize:
*
* The snapshots must all be in the same pool.
*
* Snapshots that don't exist will be silently ignored (considered to be
* "already deleted").
*
* On success, all snaps will be destroyed and this will return 0.
* On failure, no snaps will be destroyed, the errlist will be filled in,
* and this will return an errno.
*/
int
dsl_destroy_snapshots_nvl(nvlist_t *snaps, boolean_t defer,
nvlist_t *errlist)
{
if (nvlist_next_nvpair(snaps, NULL) == NULL)
return (0);
/*
* lzc_destroy_snaps() is documented to take an nvlist whose
* values "don't matter". We need to convert that nvlist to
* one that we know can be converted to LUA.
*/
nvlist_t *snaps_normalized = fnvlist_alloc();
for (nvpair_t *pair = nvlist_next_nvpair(snaps, NULL);
pair != NULL; pair = nvlist_next_nvpair(snaps, pair)) {
fnvlist_add_boolean_value(snaps_normalized,
nvpair_name(pair), B_TRUE);
}
nvlist_t *arg = fnvlist_alloc();
fnvlist_add_nvlist(arg, "snaps", snaps_normalized);
fnvlist_free(snaps_normalized);
fnvlist_add_boolean_value(arg, "defer", defer);
nvlist_t *wrapper = fnvlist_alloc();
fnvlist_add_nvlist(wrapper, ZCP_ARG_ARGLIST, arg);
fnvlist_free(arg);
const char *program =
"arg = ...\n"
"snaps = arg['snaps']\n"
"defer = arg['defer']\n"
"errors = { }\n"
"has_errors = false\n"
"for snap, v in pairs(snaps) do\n"
" errno = zfs.check.destroy{snap, defer=defer}\n"
" zfs.debug('snap: ' .. snap .. ' errno: ' .. errno)\n"
" if errno == ENOENT then\n"
" snaps[snap] = nil\n"
" elseif errno ~= 0 then\n"
" errors[snap] = errno\n"
" has_errors = true\n"
" end\n"
"end\n"
"if has_errors then\n"
" return errors\n"
"end\n"
"for snap, v in pairs(snaps) do\n"
" errno = zfs.sync.destroy{snap, defer=defer}\n"
" assert(errno == 0)\n"
"end\n"
"return { }\n";
nvlist_t *result = fnvlist_alloc();
int error = zcp_eval(nvpair_name(nvlist_next_nvpair(snaps, NULL)),
program,
OpenZFS 8677 - Open-Context Channel Programs Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Chris Williamson <chris.williamson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
2018-02-08 19:35:09 +03:00
B_TRUE,
0,
zfs_lua_max_memlimit,
fnvlist_lookup_nvpair(wrapper, ZCP_ARG_ARGLIST), result);
if (error != 0) {
char *errorstr = NULL;
(void) nvlist_lookup_string(result, ZCP_RET_ERROR, &errorstr);
if (errorstr != NULL) {
zfs_dbgmsg("%s", errorstr);
}
fnvlist_free(wrapper);
fnvlist_free(result);
return (error);
}
fnvlist_free(wrapper);
/*
* lzc_destroy_snaps() is documented to fill the errlist with
* int32 values, so we need to convert the int64 values that are
* returned from LUA.
*/
int rv = 0;
nvlist_t *errlist_raw = fnvlist_lookup_nvlist(result, ZCP_RET_RETURN);
for (nvpair_t *pair = nvlist_next_nvpair(errlist_raw, NULL);
pair != NULL; pair = nvlist_next_nvpair(errlist_raw, pair)) {
int32_t val = (int32_t)fnvpair_value_int64(pair);
if (rv == 0)
rv = val;
fnvlist_add_int32(errlist, nvpair_name(pair), val);
}
fnvlist_free(result);
return (rv);
}
int
dsl_destroy_snapshot(const char *name, boolean_t defer)
{
int error;
nvlist_t *nvl = fnvlist_alloc();
nvlist_t *errlist = fnvlist_alloc();
fnvlist_add_boolean(nvl, name);
error = dsl_destroy_snapshots_nvl(nvl, defer, errlist);
fnvlist_free(errlist);
fnvlist_free(nvl);
return (error);
}
struct killarg {
dsl_dataset_t *ds;
dmu_tx_t *tx;
};
static int
kill_blkptr(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
{
(void) spa, (void) dnp;
struct killarg *ka = arg;
dmu_tx_t *tx = ka->tx;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (zb->zb_level == ZB_DNODE_LEVEL || BP_IS_HOLE(bp) ||
BP_IS_EMBEDDED(bp))
return (0);
if (zb->zb_level == ZB_ZIL_LEVEL) {
ASSERT(zilog != NULL);
/*
* It's a block in the intent log. It has no
* accounting, so just free it.
*/
dsl_free(ka->tx->tx_pool, ka->tx->tx_txg, bp);
} else {
ASSERT(zilog == NULL);
ASSERT3U(bp->blk_birth, >,
dsl_dataset_phys(ka->ds)->ds_prev_snap_txg);
(void) dsl_dataset_block_kill(ka->ds, bp, tx, B_FALSE);
}
return (0);
}
static void
old_synchronous_dataset_destroy(dsl_dataset_t *ds, dmu_tx_t *tx)
{
struct killarg ka;
Fix i/o error handling of livelists and zap iteration Pool-wide metadata is stored in the MOS (Meta Object Set). This metadata is stored in triplicate, in addition to any pool-level reduncancy (e.g. RAIDZ). However, if all 3+ copies of this metadata are not available, we can still get EIO/ECKSUM when reading from the MOS. If we encounter such an error in syncing context, we have typically already committed to making a change that we now can't do because of the corrupt/missing metadata. We typically "handle" this with a `VERIFY()` or `zfs_panic_recover()`. This prevents the system from continuing on in an undefined state, while minimizing the amount of error-handling code. However, there are some code paths that ignore these i/o errors, or `ASSERT()` that they don't happen. Since assertions are disabled on non-debug builds, they effectively ignore them as well. This can lead to ZFS continuing on in an incorrect state, potentially leading to on-disk inconsistencies. This commit adds handling for these i/o errors on MOS metadata, typically with a `VERIFY()`: * Handle error return from `zap_cursor_retrieve()` in 4 places in `dsl_deadlist.c`. * Handle error return from `zap_contains()` in `dsl_dir_hold_obj()`. Turns out this call isn't necessary because we can always call `zap_lookup()`. * Handle error return from `zap_lookup()` in `dsl_fs_ss_limit_check()`. * Handle error return from `zap_remove()` in `dsl_dir_rename_sync()`. * Handle error return from `zap_lookup()` in `dsl_dir_remove_livelist()`. * Handle error return from `dsl_process_sub_livelist()` in `spa_livelist_delete_cb()`. Additionally: * Augment the internal history log message for `zfs destroy` to note which method is used (e.g. bptree, livelist, or, synchronous) and the mintxg. * Correct a comment in `dbuf_init()`. * Correct indentation in `dsl_dir_remove_livelist()`. Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10643
2020-08-05 20:22:09 +03:00
spa_history_log_internal_ds(ds, "destroy", tx,
"(synchronous, mintxg=%llu)",
(long long)dsl_dataset_phys(ds)->ds_prev_snap_txg);
/*
* Free everything that we point to (that's born after
* the previous snapshot, if we are a clone)
*
* NB: this should be very quick, because we already
* freed all the objects in open context.
*/
ka.ds = ds;
ka.tx = tx;
VERIFY0(traverse_dataset(ds,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dsl_dataset_phys(ds)->ds_prev_snap_txg, TRAVERSE_POST |
TRAVERSE_NO_DECRYPT, kill_blkptr, &ka));
ASSERT(!DS_UNIQUE_IS_ACCURATE(ds) ||
dsl_dataset_phys(ds)->ds_unique_bytes == 0);
}
int
dsl_destroy_head_check_impl(dsl_dataset_t *ds, int expected_holds)
{
int error;
uint64_t count;
objset_t *mos;
ASSERT(!ds->ds_is_snapshot);
if (ds->ds_is_snapshot)
return (SET_ERROR(EINVAL));
if (zfs_refcount_count(&ds->ds_longholds) != expected_holds)
return (SET_ERROR(EBUSY));
ASSERT0(ds->ds_dir->dd_activity_waiters);
mos = ds->ds_dir->dd_pool->dp_meta_objset;
/*
* Can't delete a head dataset if there are snapshots of it.
* (Except if the only snapshots are from the branch we cloned
* from.)
*/
if (ds->ds_prev != NULL &&
dsl_dataset_phys(ds->ds_prev)->ds_next_snap_obj == ds->ds_object)
return (SET_ERROR(EBUSY));
/*
* Can't delete if there are children of this fs.
*/
error = zap_count(mos,
dsl_dir_phys(ds->ds_dir)->dd_child_dir_zapobj, &count);
if (error != 0)
return (error);
if (count != 0)
return (SET_ERROR(EEXIST));
if (dsl_dir_is_clone(ds->ds_dir) && DS_IS_DEFER_DESTROY(ds->ds_prev) &&
dsl_dataset_phys(ds->ds_prev)->ds_num_children == 2 &&
ds->ds_prev->ds_userrefs == 0) {
/* We need to remove the origin snapshot as well. */
if (!zfs_refcount_is_zero(&ds->ds_prev->ds_longholds))
return (SET_ERROR(EBUSY));
}
return (0);
}
int
dsl_destroy_head_check(void *arg, dmu_tx_t *tx)
{
dsl_destroy_head_arg_t *ddha = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dataset_t *ds;
int error;
error = dsl_dataset_hold(dp, ddha->ddha_name, FTAG, &ds);
if (error != 0)
return (error);
error = dsl_destroy_head_check_impl(ds, 0);
dsl_dataset_rele(ds, FTAG);
return (error);
}
static void
dsl_dir_destroy_sync(uint64_t ddobj, dmu_tx_t *tx)
{
dsl_dir_t *dd;
dsl_pool_t *dp = dmu_tx_pool(tx);
objset_t *mos = dp->dp_meta_objset;
dd_used_t t;
ASSERT(RRW_WRITE_HELD(&dmu_tx_pool(tx)->dp_config_rwlock));
VERIFY0(dsl_dir_hold_obj(dp, ddobj, NULL, FTAG, &dd));
ASSERT0(dsl_dir_phys(dd)->dd_head_dataset_obj);
/* Decrement the filesystem count for all parent filesystems. */
if (dd->dd_parent != NULL)
dsl_fs_ss_count_adjust(dd->dd_parent, -1,
DD_FIELD_FILESYSTEM_COUNT, tx);
/*
* Remove our reservation. The impl() routine avoids setting the
* actual property, which would require the (already destroyed) ds.
*/
dsl_dir_set_reservation_sync_impl(dd, 0, tx);
ASSERT0(dsl_dir_phys(dd)->dd_used_bytes);
ASSERT0(dsl_dir_phys(dd)->dd_reserved);
for (t = 0; t < DD_USED_NUM; t++)
ASSERT0(dsl_dir_phys(dd)->dd_used_breakdown[t]);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (dd->dd_crypto_obj != 0) {
dsl_crypto_key_destroy_sync(dd->dd_crypto_obj, tx);
(void) spa_keystore_unload_wkey_impl(dp->dp_spa, dd->dd_object);
}
VERIFY0(zap_destroy(mos, dsl_dir_phys(dd)->dd_child_dir_zapobj, tx));
VERIFY0(zap_destroy(mos, dsl_dir_phys(dd)->dd_props_zapobj, tx));
if (dsl_dir_phys(dd)->dd_clones != 0)
VERIFY0(zap_destroy(mos, dsl_dir_phys(dd)->dd_clones, tx));
VERIFY0(dsl_deleg_destroy(mos, dsl_dir_phys(dd)->dd_deleg_zapobj, tx));
VERIFY0(zap_remove(mos,
dsl_dir_phys(dd->dd_parent)->dd_child_dir_zapobj,
dd->dd_myname, tx));
dsl_dir_rele(dd, FTAG);
dmu_object_free_zapified(mos, ddobj, tx);
}
static void
dsl_clone_destroy_assert(dsl_dir_t *dd)
{
uint64_t used, comp, uncomp;
ASSERT(dsl_dir_is_clone(dd));
dsl_deadlist_space(&dd->dd_livelist, &used, &comp, &uncomp);
ASSERT3U(dsl_dir_phys(dd)->dd_used_bytes, ==, used);
ASSERT3U(dsl_dir_phys(dd)->dd_compressed_bytes, ==, comp);
/*
* Greater than because we do not track embedded block pointers in
* the livelist
*/
ASSERT3U(dsl_dir_phys(dd)->dd_uncompressed_bytes, >=, uncomp);
ASSERT(list_is_empty(&dd->dd_pending_allocs.bpl_list));
ASSERT(list_is_empty(&dd->dd_pending_frees.bpl_list));
}
/*
* Start the delete process for a clone. Free its zil, verify the space usage
* and queue the blkptrs for deletion by adding the livelist to the pool-wide
* delete queue.
*/
static void
dsl_async_clone_destroy(dsl_dataset_t *ds, dmu_tx_t *tx)
{
uint64_t zap_obj, to_delete, used, comp, uncomp;
objset_t *os;
dsl_dir_t *dd = ds->ds_dir;
dsl_pool_t *dp = dmu_tx_pool(tx);
objset_t *mos = dp->dp_meta_objset;
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
VERIFY0(dmu_objset_from_ds(ds, &os));
Fix i/o error handling of livelists and zap iteration Pool-wide metadata is stored in the MOS (Meta Object Set). This metadata is stored in triplicate, in addition to any pool-level reduncancy (e.g. RAIDZ). However, if all 3+ copies of this metadata are not available, we can still get EIO/ECKSUM when reading from the MOS. If we encounter such an error in syncing context, we have typically already committed to making a change that we now can't do because of the corrupt/missing metadata. We typically "handle" this with a `VERIFY()` or `zfs_panic_recover()`. This prevents the system from continuing on in an undefined state, while minimizing the amount of error-handling code. However, there are some code paths that ignore these i/o errors, or `ASSERT()` that they don't happen. Since assertions are disabled on non-debug builds, they effectively ignore them as well. This can lead to ZFS continuing on in an incorrect state, potentially leading to on-disk inconsistencies. This commit adds handling for these i/o errors on MOS metadata, typically with a `VERIFY()`: * Handle error return from `zap_cursor_retrieve()` in 4 places in `dsl_deadlist.c`. * Handle error return from `zap_contains()` in `dsl_dir_hold_obj()`. Turns out this call isn't necessary because we can always call `zap_lookup()`. * Handle error return from `zap_lookup()` in `dsl_fs_ss_limit_check()`. * Handle error return from `zap_remove()` in `dsl_dir_rename_sync()`. * Handle error return from `zap_lookup()` in `dsl_dir_remove_livelist()`. * Handle error return from `dsl_process_sub_livelist()` in `spa_livelist_delete_cb()`. Additionally: * Augment the internal history log message for `zfs destroy` to note which method is used (e.g. bptree, livelist, or, synchronous) and the mintxg. * Correct a comment in `dbuf_init()`. * Correct indentation in `dsl_dir_remove_livelist()`. Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10643
2020-08-05 20:22:09 +03:00
uint64_t mintxg = 0;
dsl_deadlist_entry_t *dle = dsl_deadlist_first(&dd->dd_livelist);
if (dle != NULL)
mintxg = dle->dle_mintxg;
spa_history_log_internal_ds(ds, "destroy", tx,
"(livelist, mintxg=%llu)", (long long)mintxg);
/* Check that the clone is in a correct state to be deleted */
dsl_clone_destroy_assert(dd);
/* Destroy the zil */
zil_destroy_sync(dmu_objset_zil(os), tx);
VERIFY0(zap_lookup(mos, dd->dd_object,
DD_FIELD_LIVELIST, sizeof (uint64_t), 1, &to_delete));
/* Initialize deleted_clones entry to track livelists to cleanup */
int error = zap_lookup(mos, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DELETED_CLONES, sizeof (uint64_t), 1, &zap_obj);
if (error == ENOENT) {
zap_obj = zap_create(mos, DMU_OTN_ZAP_METADATA,
DMU_OT_NONE, 0, tx);
VERIFY0(zap_add(mos, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DELETED_CLONES, sizeof (uint64_t), 1,
&(zap_obj), tx));
spa->spa_livelists_to_delete = zap_obj;
} else if (error != 0) {
zfs_panic_recover("zfs: error %d was returned while looking "
Fix i/o error handling of livelists and zap iteration Pool-wide metadata is stored in the MOS (Meta Object Set). This metadata is stored in triplicate, in addition to any pool-level reduncancy (e.g. RAIDZ). However, if all 3+ copies of this metadata are not available, we can still get EIO/ECKSUM when reading from the MOS. If we encounter such an error in syncing context, we have typically already committed to making a change that we now can't do because of the corrupt/missing metadata. We typically "handle" this with a `VERIFY()` or `zfs_panic_recover()`. This prevents the system from continuing on in an undefined state, while minimizing the amount of error-handling code. However, there are some code paths that ignore these i/o errors, or `ASSERT()` that they don't happen. Since assertions are disabled on non-debug builds, they effectively ignore them as well. This can lead to ZFS continuing on in an incorrect state, potentially leading to on-disk inconsistencies. This commit adds handling for these i/o errors on MOS metadata, typically with a `VERIFY()`: * Handle error return from `zap_cursor_retrieve()` in 4 places in `dsl_deadlist.c`. * Handle error return from `zap_contains()` in `dsl_dir_hold_obj()`. Turns out this call isn't necessary because we can always call `zap_lookup()`. * Handle error return from `zap_lookup()` in `dsl_fs_ss_limit_check()`. * Handle error return from `zap_remove()` in `dsl_dir_rename_sync()`. * Handle error return from `zap_lookup()` in `dsl_dir_remove_livelist()`. * Handle error return from `dsl_process_sub_livelist()` in `spa_livelist_delete_cb()`. Additionally: * Augment the internal history log message for `zfs destroy` to note which method is used (e.g. bptree, livelist, or, synchronous) and the mintxg. * Correct a comment in `dbuf_init()`. * Correct indentation in `dsl_dir_remove_livelist()`. Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10643
2020-08-05 20:22:09 +03:00
"up DMU_POOL_DELETED_CLONES in the zap", error);
return;
}
VERIFY0(zap_add_int(mos, zap_obj, to_delete, tx));
/* Clone is no longer using space, now tracked by dp_free_dir */
dsl_deadlist_space(&dd->dd_livelist, &used, &comp, &uncomp);
dsl_dir_diduse_space(dd, DD_USED_HEAD,
-used, -comp, -dsl_dir_phys(dd)->dd_uncompressed_bytes,
tx);
dsl_dir_diduse_space(dp->dp_free_dir, DD_USED_HEAD,
used, comp, uncomp, tx);
dsl_dir_remove_livelist(dd, tx, B_FALSE);
zthr_wakeup(spa->spa_livelist_delete_zthr);
}
/*
* Move the bptree into the pool's list of trees to clean up, update space
* accounting information and destroy the zil.
*/
static void
dsl_async_dataset_destroy(dsl_dataset_t *ds, dmu_tx_t *tx)
{
uint64_t used, comp, uncomp;
objset_t *os;
VERIFY0(dmu_objset_from_ds(ds, &os));
dsl_pool_t *dp = dmu_tx_pool(tx);
objset_t *mos = dp->dp_meta_objset;
Fix i/o error handling of livelists and zap iteration Pool-wide metadata is stored in the MOS (Meta Object Set). This metadata is stored in triplicate, in addition to any pool-level reduncancy (e.g. RAIDZ). However, if all 3+ copies of this metadata are not available, we can still get EIO/ECKSUM when reading from the MOS. If we encounter such an error in syncing context, we have typically already committed to making a change that we now can't do because of the corrupt/missing metadata. We typically "handle" this with a `VERIFY()` or `zfs_panic_recover()`. This prevents the system from continuing on in an undefined state, while minimizing the amount of error-handling code. However, there are some code paths that ignore these i/o errors, or `ASSERT()` that they don't happen. Since assertions are disabled on non-debug builds, they effectively ignore them as well. This can lead to ZFS continuing on in an incorrect state, potentially leading to on-disk inconsistencies. This commit adds handling for these i/o errors on MOS metadata, typically with a `VERIFY()`: * Handle error return from `zap_cursor_retrieve()` in 4 places in `dsl_deadlist.c`. * Handle error return from `zap_contains()` in `dsl_dir_hold_obj()`. Turns out this call isn't necessary because we can always call `zap_lookup()`. * Handle error return from `zap_lookup()` in `dsl_fs_ss_limit_check()`. * Handle error return from `zap_remove()` in `dsl_dir_rename_sync()`. * Handle error return from `zap_lookup()` in `dsl_dir_remove_livelist()`. * Handle error return from `dsl_process_sub_livelist()` in `spa_livelist_delete_cb()`. Additionally: * Augment the internal history log message for `zfs destroy` to note which method is used (e.g. bptree, livelist, or, synchronous) and the mintxg. * Correct a comment in `dbuf_init()`. * Correct indentation in `dsl_dir_remove_livelist()`. Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10643
2020-08-05 20:22:09 +03:00
spa_history_log_internal_ds(ds, "destroy", tx,
"(bptree, mintxg=%llu)",
(long long)dsl_dataset_phys(ds)->ds_prev_snap_txg);
zil_destroy_sync(dmu_objset_zil(os), tx);
if (!spa_feature_is_active(dp->dp_spa,
SPA_FEATURE_ASYNC_DESTROY)) {
dsl_scan_t *scn = dp->dp_scan;
spa_feature_incr(dp->dp_spa, SPA_FEATURE_ASYNC_DESTROY,
tx);
dp->dp_bptree_obj = bptree_alloc(mos, tx);
VERIFY0(zap_add(mos,
DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_BPTREE_OBJ, sizeof (uint64_t), 1,
&dp->dp_bptree_obj, tx));
ASSERT(!scn->scn_async_destroying);
scn->scn_async_destroying = B_TRUE;
}
used = dsl_dir_phys(ds->ds_dir)->dd_used_bytes;
comp = dsl_dir_phys(ds->ds_dir)->dd_compressed_bytes;
uncomp = dsl_dir_phys(ds->ds_dir)->dd_uncompressed_bytes;
ASSERT(!DS_UNIQUE_IS_ACCURATE(ds) ||
dsl_dataset_phys(ds)->ds_unique_bytes == used);
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
bptree_add(mos, dp->dp_bptree_obj,
&dsl_dataset_phys(ds)->ds_bp,
dsl_dataset_phys(ds)->ds_prev_snap_txg,
used, comp, uncomp, tx);
rrw_exit(&ds->ds_bp_rwlock, FTAG);
dsl_dir_diduse_space(ds->ds_dir, DD_USED_HEAD,
-used, -comp, -uncomp, tx);
dsl_dir_diduse_space(dp->dp_free_dir, DD_USED_HEAD,
used, comp, uncomp, tx);
}
void
dsl_destroy_head_sync_impl(dsl_dataset_t *ds, dmu_tx_t *tx)
{
dsl_pool_t *dp = dmu_tx_pool(tx);
objset_t *mos = dp->dp_meta_objset;
uint64_t obj, ddobj, prevobj = 0;
boolean_t rmorigin;
ASSERT3U(dsl_dataset_phys(ds)->ds_num_children, <=, 1);
ASSERT(ds->ds_prev == NULL ||
dsl_dataset_phys(ds->ds_prev)->ds_next_snap_obj != ds->ds_object);
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
ASSERT3U(dsl_dataset_phys(ds)->ds_bp.blk_birth, <=, tx->tx_txg);
rrw_exit(&ds->ds_bp_rwlock, FTAG);
ASSERT(RRW_WRITE_HELD(&dp->dp_config_rwlock));
dsl_dir_cancel_waiters(ds->ds_dir);
rmorigin = (dsl_dir_is_clone(ds->ds_dir) &&
DS_IS_DEFER_DESTROY(ds->ds_prev) &&
dsl_dataset_phys(ds->ds_prev)->ds_num_children == 2 &&
ds->ds_prev->ds_userrefs == 0);
/* Remove our reservation. */
if (ds->ds_reserved != 0) {
dsl_dataset_set_refreservation_sync_impl(ds,
(ZPROP_SRC_NONE | ZPROP_SRC_LOCAL | ZPROP_SRC_RECEIVED),
0, tx);
ASSERT0(ds->ds_reserved);
}
obj = ds->ds_object;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
for (spa_feature_t f = 0; f < SPA_FEATURES; f++) {
if (dsl_dataset_feature_is_active(ds, f))
dsl_dataset_deactivate_feature(ds, f, tx);
}
dsl_scan_ds_destroyed(ds, tx);
if (dsl_dataset_phys(ds)->ds_prev_snap_obj != 0) {
/* This is a clone */
ASSERT(ds->ds_prev != NULL);
ASSERT3U(dsl_dataset_phys(ds->ds_prev)->ds_next_snap_obj, !=,
obj);
ASSERT0(dsl_dataset_phys(ds)->ds_next_snap_obj);
dmu_buf_will_dirty(ds->ds_prev->ds_dbuf, tx);
if (dsl_dataset_phys(ds->ds_prev)->ds_next_clones_obj != 0) {
dsl_dataset_remove_from_next_clones(ds->ds_prev,
obj, tx);
}
ASSERT3U(dsl_dataset_phys(ds->ds_prev)->ds_num_children, >, 1);
dsl_dataset_phys(ds->ds_prev)->ds_num_children--;
}
/*
* Destroy the deadlist. Unless it's a clone, the
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
* deadlist should be empty since the dataset has no snapshots.
* (If it's a clone, it's safe to ignore the deadlist contents
* since they are still referenced by the origin snapshot.)
*/
dsl_deadlist_close(&ds->ds_deadlist);
dsl_deadlist_free(mos, dsl_dataset_phys(ds)->ds_deadlist_obj, tx);
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_deadlist_obj = 0;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (dsl_dataset_remap_deadlist_exists(ds))
dsl_dataset_destroy_remap_deadlist(ds, tx);
/*
* Each destroy is responsible for both destroying (enqueuing
* to be destroyed) the blkptrs comprising the dataset as well as
* those belonging to the zil.
*/
if (dsl_deadlist_is_open(&ds->ds_dir->dd_livelist)) {
dsl_async_clone_destroy(ds, tx);
} else if (spa_feature_is_enabled(dp->dp_spa,
SPA_FEATURE_ASYNC_DESTROY)) {
dsl_async_dataset_destroy(ds, tx);
} else {
old_synchronous_dataset_destroy(ds, tx);
}
if (ds->ds_prev != NULL) {
if (spa_version(dp->dp_spa) >= SPA_VERSION_DIR_CLONES) {
VERIFY0(zap_remove_int(mos,
dsl_dir_phys(ds->ds_prev->ds_dir)->dd_clones,
ds->ds_object, tx));
}
prevobj = ds->ds_prev->ds_object;
dsl_dataset_rele(ds->ds_prev, ds);
ds->ds_prev = NULL;
}
/*
* This must be done after the dsl_traverse(), because it will
* re-open the objset.
*/
if (ds->ds_objset) {
dmu_objset_evict(ds->ds_objset);
ds->ds_objset = NULL;
}
/* Erase the link in the dir */
dmu_buf_will_dirty(ds->ds_dir->dd_dbuf, tx);
dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj = 0;
ddobj = ds->ds_dir->dd_object;
ASSERT(dsl_dataset_phys(ds)->ds_snapnames_zapobj != 0);
VERIFY0(zap_destroy(mos,
dsl_dataset_phys(ds)->ds_snapnames_zapobj, tx));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (ds->ds_bookmarks_obj != 0) {
void *cookie = NULL;
dsl_bookmark_node_t *dbn;
while ((dbn = avl_destroy_nodes(&ds->ds_bookmarks, &cookie)) !=
NULL) {
if (dbn->dbn_phys.zbm_redaction_obj != 0) {
VERIFY0(dmu_object_free(mos,
dbn->dbn_phys.zbm_redaction_obj, tx));
spa_feature_decr(dmu_objset_spa(mos),
SPA_FEATURE_REDACTION_BOOKMARKS, tx);
}
if (dbn->dbn_phys.zbm_flags & ZBM_FLAG_HAS_FBN) {
spa_feature_decr(dmu_objset_spa(mos),
SPA_FEATURE_BOOKMARK_WRITTEN, tx);
}
spa_strfree(dbn->dbn_name);
mutex_destroy(&dbn->dbn_lock);
kmem_free(dbn, sizeof (*dbn));
}
avl_destroy(&ds->ds_bookmarks);
VERIFY0(zap_destroy(mos, ds->ds_bookmarks_obj, tx));
spa_feature_decr(dp->dp_spa, SPA_FEATURE_BOOKMARKS, tx);
}
spa_prop_clear_bootfs(dp->dp_spa, ds->ds_object, tx);
ASSERT0(dsl_dataset_phys(ds)->ds_next_clones_obj);
ASSERT0(dsl_dataset_phys(ds)->ds_props_obj);
ASSERT0(dsl_dataset_phys(ds)->ds_userrefs_obj);
dsl_dir_rele(ds->ds_dir, ds);
ds->ds_dir = NULL;
dmu_object_free_zapified(mos, obj, tx);
dsl_dir_destroy_sync(ddobj, tx);
if (rmorigin) {
dsl_dataset_t *prev;
VERIFY0(dsl_dataset_hold_obj(dp, prevobj, FTAG, &prev));
dsl_destroy_snapshot_sync_impl(prev, B_FALSE, tx);
dsl_dataset_rele(prev, FTAG);
}
}
void
dsl_destroy_head_sync(void *arg, dmu_tx_t *tx)
{
dsl_destroy_head_arg_t *ddha = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dataset_t *ds;
VERIFY0(dsl_dataset_hold(dp, ddha->ddha_name, FTAG, &ds));
dsl_destroy_head_sync_impl(ds, tx);
zvol_remove_minors(dp->dp_spa, ddha->ddha_name, B_TRUE);
dsl_dataset_rele(ds, FTAG);
}
static void
dsl_destroy_head_begin_sync(void *arg, dmu_tx_t *tx)
{
dsl_destroy_head_arg_t *ddha = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dataset_t *ds;
VERIFY0(dsl_dataset_hold(dp, ddha->ddha_name, FTAG, &ds));
/* Mark it as inconsistent on-disk, in case we crash */
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_flags |= DS_FLAG_INCONSISTENT;
spa_history_log_internal_ds(ds, "destroy begin", tx, " ");
dsl_dataset_rele(ds, FTAG);
}
int
dsl_destroy_head(const char *name)
{
dsl_destroy_head_arg_t ddha;
int error;
spa_t *spa;
boolean_t isenabled;
#ifdef _KERNEL
zfs_destroy_unmount_origin(name);
#endif
error = spa_open(name, &spa, FTAG);
if (error != 0)
return (error);
isenabled = spa_feature_is_enabled(spa, SPA_FEATURE_ASYNC_DESTROY);
spa_close(spa, FTAG);
ddha.ddha_name = name;
if (!isenabled) {
objset_t *os;
error = dsl_sync_task(name, dsl_destroy_head_check,
dsl_destroy_head_begin_sync, &ddha,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
0, ZFS_SPACE_CHECK_DESTROY);
if (error != 0)
return (error);
/*
* Head deletion is processed in one txg on old pools;
* remove the objects from open context so that the txg sync
* is not too long. This optimization can only work for
* encrypted datasets if the wrapping key is loaded.
*/
error = dmu_objset_own(name, DMU_OST_ANY, B_FALSE, B_TRUE,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
FTAG, &os);
if (error == 0) {
uint64_t prev_snap_txg =
dsl_dataset_phys(dmu_objset_ds(os))->
ds_prev_snap_txg;
for (uint64_t obj = 0; error == 0;
error = dmu_object_next(os, &obj, FALSE,
prev_snap_txg))
(void) dmu_free_long_object(os, obj);
/* sync out all frees */
txg_wait_synced(dmu_objset_pool(os), 0);
dmu_objset_disown(os, B_TRUE, FTAG);
}
}
return (dsl_sync_task(name, dsl_destroy_head_check,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
dsl_destroy_head_sync, &ddha, 0, ZFS_SPACE_CHECK_DESTROY));
}
/*
* Note, this function is used as the callback for dmu_objset_find(). We
* always return 0 so that we will continue to find and process
* inconsistent datasets, even if we encounter an error trying to
* process one of them.
*/
int
dsl_destroy_inconsistent(const char *dsname, void *arg)
{
(void) arg;
objset_t *os;
if (dmu_objset_hold(dsname, FTAG, &os) == 0) {
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
boolean_t need_destroy = DS_IS_INCONSISTENT(dmu_objset_ds(os));
/*
* If the dataset is inconsistent because a resumable receive
* has failed, then do not destroy it.
*/
if (dsl_dataset_has_resume_receive_state(dmu_objset_ds(os)))
need_destroy = B_FALSE;
dmu_objset_rele(os, FTAG);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
if (need_destroy)
(void) dsl_destroy_head(dsname);
}
return (0);
}
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 04:53:18 +03:00
#if defined(_KERNEL)
EXPORT_SYMBOL(dsl_destroy_head);
EXPORT_SYMBOL(dsl_destroy_head_sync_impl);
EXPORT_SYMBOL(dsl_dataset_user_hold_check_one);
EXPORT_SYMBOL(dsl_destroy_snapshot_sync_impl);
EXPORT_SYMBOL(dsl_destroy_inconsistent);
EXPORT_SYMBOL(dsl_dataset_user_release_tmp);
EXPORT_SYMBOL(dsl_destroy_head_check_impl);
#endif