mirror_zfs/include/sys/brt_impl.h

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or https://opensource.org/licenses/CDDL-1.0.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2020, 2021, 2022 by Pawel Jakub Dawidek
 */

#ifndef _SYS_BRT_IMPL_H
#define	_SYS_BRT_IMPL_H

#ifdef	__cplusplus
extern "C" {
#endif

/*
 * BRT - Block Reference Table.
 */
#define	BRT_OBJECT_VDEV_PREFIX	"com.fudosecurity:brt:vdev:"

/*
 * We divide each VDEV into 16MB chunks. Each chunk is represented in memory
 * by a 16bit counter, thus 1TB VDEV requires 128kB of memory: (1TB / 16MB) * 2B
 * Each element in this array represents how many BRT entries do we have in this
 * chunk of storage. We always load this entire array into memory and update as
 * needed. By having it in memory we can quickly tell (during zio_free()) if
 * there are any BRT entries that we might need to update.
 *
 * This value cannot be larger than 16MB, at least as long as we support
 * 512 byte block sizes. With 512 byte block size we can have exactly
 * 32768 blocks in 16MB. In 32MB we could have 65536 blocks, which is one too
 * many for a 16bit counter.
 */
#define	BRT_RANGESIZE	(16 * 1024 * 1024)
_Static_assert(BRT_RANGESIZE / SPA_MINBLOCKSIZE <= UINT16_MAX,
	"BRT_RANGESIZE is too large.");
/*
 * We don't want to update the whole structure every time. Maintain bitmap
 * of dirty blocks within the regions, so that a single bit represents a
 * block size of entcounts. For example if we have a 1PB vdev then all
 * entcounts take 128MB of memory ((64TB / 16MB) * 2B). We can divide this
 * 128MB array of entcounts into 32kB disk blocks, as we don't want to update
 * the whole 128MB on disk when we have updated only a single entcount.
 * We maintain a bitmap where each 32kB disk block within 128MB entcounts array
 * is represented by a single bit. This gives us 4096 bits. A set bit in the
 * bitmap means that we had a change in at least one of the 16384 entcounts
 * that reside on a 32kB disk block (32kB / sizeof (uint16_t)).
 */
#define	BRT_BLOCKSIZE	(32 * 1024)
#define	BRT_RANGESIZE_TO_NBLOCKS(size)					\
	(((size) - 1) / BRT_BLOCKSIZE / sizeof (uint16_t) + 1)

#define	BRT_LITTLE_ENDIAN	0
#define	BRT_BIG_ENDIAN		1
#ifdef _ZFS_LITTLE_ENDIAN
#define	BRT_NATIVE_BYTEORDER		BRT_LITTLE_ENDIAN
#define	BRT_NON_NATIVE_BYTEORDER	BRT_BIG_ENDIAN
#else
#define	BRT_NATIVE_BYTEORDER		BRT_BIG_ENDIAN
#define	BRT_NON_NATIVE_BYTEORDER	BRT_LITTLE_ENDIAN
#endif

typedef struct brt_vdev_phys {
	uint64_t	bvp_mos_entries;
	uint64_t	bvp_size;
	uint64_t	bvp_byteorder;
	uint64_t	bvp_totalcount;
	uint64_t	bvp_rangesize;
	uint64_t	bvp_usedspace;
	uint64_t	bvp_savedspace;
} brt_vdev_phys_t;

typedef struct brt_vdev {
	/*
	 * VDEV id.
	 */
	uint64_t	bv_vdevid;
	/*
	 * Is the structure initiated?
	 * (bv_entcount and bv_bitmap are allocated?)
	 */
	boolean_t	bv_initiated;
	/*
	 * Object number in the MOS for the entcount array and brt_vdev_phys.
	 */
	uint64_t	bv_mos_brtvdev;
	/*
	 * Object number in the MOS for the entries table.
	 */
	uint64_t	bv_mos_entries;
	/*
	 * Entries to sync.
	 */
	avl_tree_t	bv_tree;
	/*
	 * Does the bv_entcount[] array needs byte swapping?
	 */
	boolean_t	bv_need_byteswap;
	/*
	 * Number of entries in the bv_entcount[] array.
	 */
	uint64_t	bv_size;
	/*
	 * This is the array with BRT entry count per BRT_RANGESIZE.
	 */
	uint16_t	*bv_entcount;
	/*
	 * Sum of all bv_entcount[]s.
	 */
	uint64_t	bv_totalcount;
	/*
	 * Space on disk occupied by cloned blocks (without compression).
	 */
	uint64_t	bv_usedspace;
	/*
	 * How much additional space would be occupied without block cloning.
	 */
	uint64_t	bv_savedspace;
	/*
	 * brt_vdev_phys needs updating on disk.
	 */
	boolean_t	bv_meta_dirty;
	/*
	 * bv_entcount[] needs updating on disk.
	 */
	boolean_t	bv_entcount_dirty;
	/*
	 * bv_entcount[] potentially can be a bit too big to sychronize it all
	 * when we just changed few entcounts. The fields below allow us to
	 * track updates to bv_entcount[] array since the last sync.
	 * A single bit in the bv_bitmap represents as many entcounts as can
	 * fit into a single BRT_BLOCKSIZE.
	 * For example we have 65536 entcounts in the bv_entcount array
	 * (so the whole array is 128kB). We updated bv_entcount[2] and
	 * bv_entcount[5]. In that case only first bit in the bv_bitmap will
	 * be set and we will write only first BRT_BLOCKSIZE out of 128kB.
	 */
	ulong_t		*bv_bitmap;
	uint64_t	bv_nblocks;
} brt_vdev_t;

/*
 * In-core brt
 */
typedef struct brt {
	krwlock_t	brt_lock;
	spa_t		*brt_spa;
#define	brt_mos		brt_spa->spa_meta_objset
	uint64_t	brt_rangesize;
	uint64_t	brt_usedspace;
	uint64_t	brt_savedspace;
	avl_tree_t	brt_pending_tree[TXG_SIZE];
	kmutex_t	brt_pending_lock[TXG_SIZE];
	/* Sum of all entries across all bv_trees. */
	uint64_t	brt_nentries;
	brt_vdev_t	*brt_vdevs;
	uint64_t	brt_nvdevs;
} brt_t;

/* Size of bre_offset / sizeof (uint64_t). */
#define	BRT_KEY_WORDS	(1)

/*
 * In-core brt entry.
 * On-disk we use bre_offset as the key and bre_refcount as the value.
 */
typedef struct brt_entry {
	uint64_t	bre_offset;
	uint64_t	bre_refcount;
	avl_node_t	bre_node;
} brt_entry_t;

typedef struct brt_pending_entry {
	blkptr_t	bpe_bp;
	int		bpe_count;
	avl_node_t	bpe_node;
} brt_pending_entry_t;

#ifdef	__cplusplus
}
#endif

#endif	/* _SYS_BRT_IMPL_H */