mirror_zfs/module/zfs/dmu_zfetch.c

743 lines
19 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
2008-11-20 23:01:55 +03:00
* Use is subject to license terms.
*/
#include <sys/zfs_context.h>
#include <sys/dnode.h>
#include <sys/dmu_objset.h>
#include <sys/dmu_zfetch.h>
#include <sys/dmu.h>
#include <sys/dbuf.h>
#include <sys/kstat.h>
2008-11-20 23:01:55 +03:00
/*
* I'm against tune-ables, but these should probably exist as tweakable globals
* until we can get this working the way we want it to.
*/
int zfs_prefetch_disable = 0;
/* max # of streams per zfetch */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
unsigned int zfetch_max_streams = 8;
2008-11-20 23:01:55 +03:00
/* min time before stream reclaim */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
unsigned int zfetch_min_sec_reap = 2;
2008-11-20 23:01:55 +03:00
/* max number of blocks to fetch at a time */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
unsigned int zfetch_block_cap = 256;
2008-11-20 23:01:55 +03:00
/* number of bytes in a array_read at which we stop prefetching (1Mb) */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
unsigned long zfetch_array_rd_sz = 1024 * 1024;
2008-11-20 23:01:55 +03:00
/* forward decls for static routines */
static int dmu_zfetch_colinear(zfetch_t *, zstream_t *);
static void dmu_zfetch_dofetch(zfetch_t *, zstream_t *);
static uint64_t dmu_zfetch_fetch(dnode_t *, uint64_t, uint64_t);
static uint64_t dmu_zfetch_fetchsz(dnode_t *, uint64_t, uint64_t);
static int dmu_zfetch_find(zfetch_t *, zstream_t *, int);
static int dmu_zfetch_stream_insert(zfetch_t *, zstream_t *);
static zstream_t *dmu_zfetch_stream_reclaim(zfetch_t *);
static void dmu_zfetch_stream_remove(zfetch_t *, zstream_t *);
static int dmu_zfetch_streams_equal(zstream_t *, zstream_t *);
typedef struct zfetch_stats {
kstat_named_t zfetchstat_hits;
kstat_named_t zfetchstat_misses;
kstat_named_t zfetchstat_colinear_hits;
kstat_named_t zfetchstat_colinear_misses;
kstat_named_t zfetchstat_stride_hits;
kstat_named_t zfetchstat_stride_misses;
kstat_named_t zfetchstat_reclaim_successes;
kstat_named_t zfetchstat_reclaim_failures;
kstat_named_t zfetchstat_stream_resets;
kstat_named_t zfetchstat_stream_noresets;
kstat_named_t zfetchstat_bogus_streams;
} zfetch_stats_t;
static zfetch_stats_t zfetch_stats = {
{ "hits", KSTAT_DATA_UINT64 },
{ "misses", KSTAT_DATA_UINT64 },
{ "colinear_hits", KSTAT_DATA_UINT64 },
{ "colinear_misses", KSTAT_DATA_UINT64 },
{ "stride_hits", KSTAT_DATA_UINT64 },
{ "stride_misses", KSTAT_DATA_UINT64 },
{ "reclaim_successes", KSTAT_DATA_UINT64 },
{ "reclaim_failures", KSTAT_DATA_UINT64 },
{ "streams_resets", KSTAT_DATA_UINT64 },
{ "streams_noresets", KSTAT_DATA_UINT64 },
{ "bogus_streams", KSTAT_DATA_UINT64 },
};
#define ZFETCHSTAT_INCR(stat, val) \
atomic_add_64(&zfetch_stats.stat.value.ui64, (val));
#define ZFETCHSTAT_BUMP(stat) ZFETCHSTAT_INCR(stat, 1);
kstat_t *zfetch_ksp;
2008-11-20 23:01:55 +03:00
/*
* Given a zfetch structure and a zstream structure, determine whether the
* blocks to be read are part of a co-linear pair of existing prefetch
* streams. If a set is found, coalesce the streams, removing one, and
* configure the prefetch so it looks for a strided access pattern.
*
* In other words: if we find two sequential access streams that are
* the same length and distance N appart, and this read is N from the
* last stream, then we are probably in a strided access pattern. So
* combine the two sequential streams into a single strided stream.
*
* If no co-linear streams are found, return NULL.
*/
static int
dmu_zfetch_colinear(zfetch_t *zf, zstream_t *zh)
{
zstream_t *z_walk;
zstream_t *z_comp;
if (! rw_tryenter(&zf->zf_rwlock, RW_WRITER))
return (0);
if (zh == NULL) {
rw_exit(&zf->zf_rwlock);
return (0);
}
for (z_walk = list_head(&zf->zf_stream); z_walk;
z_walk = list_next(&zf->zf_stream, z_walk)) {
for (z_comp = list_next(&zf->zf_stream, z_walk); z_comp;
z_comp = list_next(&zf->zf_stream, z_comp)) {
int64_t diff;
if (z_walk->zst_len != z_walk->zst_stride ||
z_comp->zst_len != z_comp->zst_stride) {
continue;
}
diff = z_comp->zst_offset - z_walk->zst_offset;
if (z_comp->zst_offset + diff == zh->zst_offset) {
z_walk->zst_offset = zh->zst_offset;
z_walk->zst_direction = diff < 0 ? -1 : 1;
z_walk->zst_stride =
diff * z_walk->zst_direction;
z_walk->zst_ph_offset =
zh->zst_offset + z_walk->zst_stride;
dmu_zfetch_stream_remove(zf, z_comp);
mutex_destroy(&z_comp->zst_lock);
kmem_free(z_comp, sizeof (zstream_t));
dmu_zfetch_dofetch(zf, z_walk);
rw_exit(&zf->zf_rwlock);
return (1);
}
diff = z_walk->zst_offset - z_comp->zst_offset;
if (z_walk->zst_offset + diff == zh->zst_offset) {
z_walk->zst_offset = zh->zst_offset;
z_walk->zst_direction = diff < 0 ? -1 : 1;
z_walk->zst_stride =
diff * z_walk->zst_direction;
z_walk->zst_ph_offset =
zh->zst_offset + z_walk->zst_stride;
dmu_zfetch_stream_remove(zf, z_comp);
mutex_destroy(&z_comp->zst_lock);
kmem_free(z_comp, sizeof (zstream_t));
dmu_zfetch_dofetch(zf, z_walk);
rw_exit(&zf->zf_rwlock);
return (1);
}
}
}
rw_exit(&zf->zf_rwlock);
return (0);
}
/*
* Given a zstream_t, determine the bounds of the prefetch. Then call the
* routine that actually prefetches the individual blocks.
*/
static void
dmu_zfetch_dofetch(zfetch_t *zf, zstream_t *zs)
{
uint64_t prefetch_tail;
uint64_t prefetch_limit;
uint64_t prefetch_ofst;
uint64_t prefetch_len;
uint64_t blocks_fetched;
zs->zst_stride = MAX((int64_t)zs->zst_stride, zs->zst_len);
zs->zst_cap = MIN(zfetch_block_cap, 2 * zs->zst_cap);
prefetch_tail = MAX((int64_t)zs->zst_ph_offset,
(int64_t)(zs->zst_offset + zs->zst_stride));
/*
* XXX: use a faster division method?
*/
prefetch_limit = zs->zst_offset + zs->zst_len +
(zs->zst_cap * zs->zst_stride) / zs->zst_len;
while (prefetch_tail < prefetch_limit) {
prefetch_ofst = zs->zst_offset + zs->zst_direction *
(prefetch_tail - zs->zst_offset);
prefetch_len = zs->zst_len;
/*
* Don't prefetch beyond the end of the file, if working
* backwards.
*/
if ((zs->zst_direction == ZFETCH_BACKWARD) &&
(prefetch_ofst > prefetch_tail)) {
prefetch_len += prefetch_ofst;
prefetch_ofst = 0;
}
/* don't prefetch more than we're supposed to */
if (prefetch_len > zs->zst_len)
break;
blocks_fetched = dmu_zfetch_fetch(zf->zf_dnode,
prefetch_ofst, zs->zst_len);
prefetch_tail += zs->zst_stride;
/* stop if we've run out of stuff to prefetch */
if (blocks_fetched < zs->zst_len)
break;
}
zs->zst_ph_offset = prefetch_tail;
zs->zst_last = ddi_get_lbolt();
}
void
zfetch_init(void)
{
zfetch_ksp = kstat_create("zfs", 0, "zfetchstats", "misc",
KSTAT_TYPE_NAMED, sizeof (zfetch_stats) / sizeof (kstat_named_t),
KSTAT_FLAG_VIRTUAL);
if (zfetch_ksp != NULL) {
zfetch_ksp->ks_data = &zfetch_stats;
kstat_install(zfetch_ksp);
}
}
void
zfetch_fini(void)
{
if (zfetch_ksp != NULL) {
kstat_delete(zfetch_ksp);
zfetch_ksp = NULL;
}
2008-11-20 23:01:55 +03:00
}
/*
* This takes a pointer to a zfetch structure and a dnode. It performs the
* necessary setup for the zfetch structure, grokking data from the
* associated dnode.
*/
void
dmu_zfetch_init(zfetch_t *zf, dnode_t *dno)
{
if (zf == NULL) {
return;
}
zf->zf_dnode = dno;
zf->zf_stream_cnt = 0;
zf->zf_alloc_fail = 0;
list_create(&zf->zf_stream, sizeof (zstream_t),
offsetof(zstream_t, zst_node));
rw_init(&zf->zf_rwlock, NULL, RW_DEFAULT, NULL);
}
/*
* This function computes the actual size, in blocks, that can be prefetched,
* and fetches it.
*/
static uint64_t
dmu_zfetch_fetch(dnode_t *dn, uint64_t blkid, uint64_t nblks)
{
uint64_t fetchsz;
uint64_t i;
fetchsz = dmu_zfetch_fetchsz(dn, blkid, nblks);
for (i = 0; i < fetchsz; i++) {
dbuf_prefetch(dn, blkid + i);
}
return (fetchsz);
}
/*
* this function returns the number of blocks that would be prefetched, based
* upon the supplied dnode, blockid, and nblks. This is used so that we can
* update streams in place, and then prefetch with their old value after the
* fact. This way, we can delay the prefetch, but subsequent accesses to the
* stream won't result in the same data being prefetched multiple times.
*/
static uint64_t
dmu_zfetch_fetchsz(dnode_t *dn, uint64_t blkid, uint64_t nblks)
{
uint64_t fetchsz;
if (blkid > dn->dn_maxblkid) {
return (0);
}
/* compute fetch size */
if (blkid + nblks + 1 > dn->dn_maxblkid) {
fetchsz = (dn->dn_maxblkid - blkid) + 1;
ASSERT(blkid + fetchsz - 1 <= dn->dn_maxblkid);
} else {
fetchsz = nblks;
}
return (fetchsz);
}
/*
* given a zfetch and a zstream structure, see if there is an associated zstream
2008-11-20 23:01:55 +03:00
* for this block read. If so, it starts a prefetch for the stream it
* located and returns true, otherwise it returns false
*/
static int
dmu_zfetch_find(zfetch_t *zf, zstream_t *zh, int prefetched)
{
zstream_t *zs;
int64_t diff;
int reset = !prefetched;
int rc = 0;
if (zh == NULL)
return (0);
/*
* XXX: This locking strategy is a bit coarse; however, it's impact has
* yet to be tested. If this turns out to be an issue, it can be
* modified in a number of different ways.
*/
rw_enter(&zf->zf_rwlock, RW_READER);
top:
for (zs = list_head(&zf->zf_stream); zs;
zs = list_next(&zf->zf_stream, zs)) {
/*
* XXX - should this be an assert?
*/
if (zs->zst_len == 0) {
/* bogus stream */
ZFETCHSTAT_BUMP(zfetchstat_bogus_streams);
2008-11-20 23:01:55 +03:00
continue;
}
/*
* We hit this case when we are in a strided prefetch stream:
* we will read "len" blocks before "striding".
*/
if (zh->zst_offset >= zs->zst_offset &&
zh->zst_offset < zs->zst_offset + zs->zst_len) {
if (prefetched) {
/* already fetched */
ZFETCHSTAT_BUMP(zfetchstat_stride_hits);
rc = 1;
goto out;
} else {
ZFETCHSTAT_BUMP(zfetchstat_stride_misses);
}
2008-11-20 23:01:55 +03:00
}
/*
* This is the forward sequential read case: we increment
* len by one each time we hit here, so we will enter this
* case on every read.
*/
if (zh->zst_offset == zs->zst_offset + zs->zst_len) {
reset = !prefetched && zs->zst_len > 1;
mutex_enter(&zs->zst_lock);
if (zh->zst_offset != zs->zst_offset + zs->zst_len) {
mutex_exit(&zs->zst_lock);
goto top;
}
zs->zst_len += zh->zst_len;
diff = zs->zst_len - zfetch_block_cap;
if (diff > 0) {
zs->zst_offset += diff;
zs->zst_len = zs->zst_len > diff ?
zs->zst_len - diff : 0;
}
zs->zst_direction = ZFETCH_FORWARD;
break;
/*
* Same as above, but reading backwards through the file.
*/
} else if (zh->zst_offset == zs->zst_offset - zh->zst_len) {
/* backwards sequential access */
reset = !prefetched && zs->zst_len > 1;
mutex_enter(&zs->zst_lock);
if (zh->zst_offset != zs->zst_offset - zh->zst_len) {
mutex_exit(&zs->zst_lock);
goto top;
}
zs->zst_offset = zs->zst_offset > zh->zst_len ?
zs->zst_offset - zh->zst_len : 0;
zs->zst_ph_offset = zs->zst_ph_offset > zh->zst_len ?
zs->zst_ph_offset - zh->zst_len : 0;
zs->zst_len += zh->zst_len;
diff = zs->zst_len - zfetch_block_cap;
if (diff > 0) {
zs->zst_ph_offset = zs->zst_ph_offset > diff ?
zs->zst_ph_offset - diff : 0;
zs->zst_len = zs->zst_len > diff ?
zs->zst_len - diff : zs->zst_len;
}
zs->zst_direction = ZFETCH_BACKWARD;
break;
} else if ((zh->zst_offset - zs->zst_offset - zs->zst_stride <
zs->zst_len) && (zs->zst_len != zs->zst_stride)) {
/* strided forward access */
mutex_enter(&zs->zst_lock);
if ((zh->zst_offset - zs->zst_offset - zs->zst_stride >=
zs->zst_len) || (zs->zst_len == zs->zst_stride)) {
mutex_exit(&zs->zst_lock);
goto top;
}
zs->zst_offset += zs->zst_stride;
zs->zst_direction = ZFETCH_FORWARD;
break;
} else if ((zh->zst_offset - zs->zst_offset + zs->zst_stride <
zs->zst_len) && (zs->zst_len != zs->zst_stride)) {
/* strided reverse access */
mutex_enter(&zs->zst_lock);
if ((zh->zst_offset - zs->zst_offset + zs->zst_stride >=
zs->zst_len) || (zs->zst_len == zs->zst_stride)) {
mutex_exit(&zs->zst_lock);
goto top;
}
zs->zst_offset = zs->zst_offset > zs->zst_stride ?
zs->zst_offset - zs->zst_stride : 0;
zs->zst_ph_offset = (zs->zst_ph_offset >
(2 * zs->zst_stride)) ?
(zs->zst_ph_offset - (2 * zs->zst_stride)) : 0;
zs->zst_direction = ZFETCH_BACKWARD;
break;
}
}
if (zs) {
if (reset) {
zstream_t *remove = zs;
ZFETCHSTAT_BUMP(zfetchstat_stream_resets);
2008-11-20 23:01:55 +03:00
rc = 0;
mutex_exit(&zs->zst_lock);
rw_exit(&zf->zf_rwlock);
rw_enter(&zf->zf_rwlock, RW_WRITER);
/*
* Relocate the stream, in case someone removes
* it while we were acquiring the WRITER lock.
*/
for (zs = list_head(&zf->zf_stream); zs;
zs = list_next(&zf->zf_stream, zs)) {
if (zs == remove) {
dmu_zfetch_stream_remove(zf, zs);
mutex_destroy(&zs->zst_lock);
kmem_free(zs, sizeof (zstream_t));
break;
}
}
} else {
ZFETCHSTAT_BUMP(zfetchstat_stream_noresets);
2008-11-20 23:01:55 +03:00
rc = 1;
dmu_zfetch_dofetch(zf, zs);
mutex_exit(&zs->zst_lock);
}
}
out:
rw_exit(&zf->zf_rwlock);
return (rc);
}
/*
* Clean-up state associated with a zfetch structure. This frees allocated
* structure members, empties the zf_stream tree, and generally makes things
* nice. This doesn't free the zfetch_t itself, that's left to the caller.
*/
void
dmu_zfetch_rele(zfetch_t *zf)
{
zstream_t *zs;
zstream_t *zs_next;
ASSERT(!RW_LOCK_HELD(&zf->zf_rwlock));
for (zs = list_head(&zf->zf_stream); zs; zs = zs_next) {
zs_next = list_next(&zf->zf_stream, zs);
list_remove(&zf->zf_stream, zs);
mutex_destroy(&zs->zst_lock);
kmem_free(zs, sizeof (zstream_t));
}
list_destroy(&zf->zf_stream);
rw_destroy(&zf->zf_rwlock);
zf->zf_dnode = NULL;
}
/*
* Given a zfetch and zstream structure, insert the zstream structure into the
* AVL tree contained within the zfetch structure. Peform the appropriate
* book-keeping. It is possible that another thread has inserted a stream which
* matches one that we are about to insert, so we must be sure to check for this
* case. If one is found, return failure, and let the caller cleanup the
* duplicates.
*/
static int
dmu_zfetch_stream_insert(zfetch_t *zf, zstream_t *zs)
{
zstream_t *zs_walk;
zstream_t *zs_next;
ASSERT(RW_WRITE_HELD(&zf->zf_rwlock));
for (zs_walk = list_head(&zf->zf_stream); zs_walk; zs_walk = zs_next) {
zs_next = list_next(&zf->zf_stream, zs_walk);
if (dmu_zfetch_streams_equal(zs_walk, zs)) {
return (0);
2008-11-20 23:01:55 +03:00
}
}
list_insert_head(&zf->zf_stream, zs);
zf->zf_stream_cnt++;
return (1);
}
/*
* Walk the list of zstreams in the given zfetch, find an old one (by time), and
* reclaim it for use by the caller.
*/
static zstream_t *
dmu_zfetch_stream_reclaim(zfetch_t *zf)
{
zstream_t *zs;
if (! rw_tryenter(&zf->zf_rwlock, RW_WRITER))
return (0);
for (zs = list_head(&zf->zf_stream); zs;
zs = list_next(&zf->zf_stream, zs)) {
if (((ddi_get_lbolt() - zs->zst_last)/hz) > zfetch_min_sec_reap)
2008-11-20 23:01:55 +03:00
break;
}
if (zs) {
dmu_zfetch_stream_remove(zf, zs);
mutex_destroy(&zs->zst_lock);
bzero(zs, sizeof (zstream_t));
} else {
zf->zf_alloc_fail++;
}
rw_exit(&zf->zf_rwlock);
return (zs);
}
/*
* Given a zfetch and zstream structure, remove the zstream structure from its
* container in the zfetch structure. Perform the appropriate book-keeping.
*/
static void
dmu_zfetch_stream_remove(zfetch_t *zf, zstream_t *zs)
{
ASSERT(RW_WRITE_HELD(&zf->zf_rwlock));
list_remove(&zf->zf_stream, zs);
zf->zf_stream_cnt--;
}
static int
dmu_zfetch_streams_equal(zstream_t *zs1, zstream_t *zs2)
{
if (zs1->zst_offset != zs2->zst_offset)
return (0);
if (zs1->zst_len != zs2->zst_len)
return (0);
if (zs1->zst_stride != zs2->zst_stride)
return (0);
if (zs1->zst_ph_offset != zs2->zst_ph_offset)
return (0);
if (zs1->zst_cap != zs2->zst_cap)
return (0);
if (zs1->zst_direction != zs2->zst_direction)
return (0);
return (1);
}
/*
* This is the prefetch entry point. It calls all of the other dmu_zfetch
* routines to create, delete, find, or operate upon prefetch streams.
*/
void
dmu_zfetch(zfetch_t *zf, uint64_t offset, uint64_t size, int prefetched)
{
zstream_t zst;
zstream_t *newstream;
int fetched;
int inserted;
unsigned int blkshft;
uint64_t blksz;
if (zfs_prefetch_disable)
return;
/* files that aren't ln2 blocksz are only one block -- nothing to do */
if (!zf->zf_dnode->dn_datablkshift)
return;
/* convert offset and size, into blockid and nblocks */
blkshft = zf->zf_dnode->dn_datablkshift;
blksz = (1 << blkshft);
bzero(&zst, sizeof (zstream_t));
zst.zst_offset = offset >> blkshft;
zst.zst_len = (P2ROUNDUP(offset + size, blksz) -
P2ALIGN(offset, blksz)) >> blkshft;
fetched = dmu_zfetch_find(zf, &zst, prefetched);
if (fetched) {
ZFETCHSTAT_BUMP(zfetchstat_hits);
} else {
ZFETCHSTAT_BUMP(zfetchstat_misses);
if ((fetched = dmu_zfetch_colinear(zf, &zst))) {
ZFETCHSTAT_BUMP(zfetchstat_colinear_hits);
} else {
ZFETCHSTAT_BUMP(zfetchstat_colinear_misses);
}
2008-11-20 23:01:55 +03:00
}
if (!fetched) {
newstream = dmu_zfetch_stream_reclaim(zf);
/*
* we still couldn't find a stream, drop the lock, and allocate
* one if possible. Otherwise, give up and go home.
*/
if (newstream) {
ZFETCHSTAT_BUMP(zfetchstat_reclaim_successes);
} else {
2008-11-20 23:01:55 +03:00
uint64_t maxblocks;
uint32_t max_streams;
uint32_t cur_streams;
ZFETCHSTAT_BUMP(zfetchstat_reclaim_failures);
2008-11-20 23:01:55 +03:00
cur_streams = zf->zf_stream_cnt;
maxblocks = zf->zf_dnode->dn_maxblkid;
max_streams = MIN(zfetch_max_streams,
(maxblocks / zfetch_block_cap));
if (max_streams == 0) {
max_streams++;
}
if (cur_streams >= max_streams) {
return;
}
newstream = kmem_zalloc(sizeof (zstream_t), KM_PUSHPAGE);
2008-11-20 23:01:55 +03:00
}
newstream->zst_offset = zst.zst_offset;
newstream->zst_len = zst.zst_len;
newstream->zst_stride = zst.zst_len;
newstream->zst_ph_offset = zst.zst_len + zst.zst_offset;
newstream->zst_cap = zst.zst_len;
newstream->zst_direction = ZFETCH_FORWARD;
newstream->zst_last = ddi_get_lbolt();
2008-11-20 23:01:55 +03:00
mutex_init(&newstream->zst_lock, NULL, MUTEX_DEFAULT, NULL);
rw_enter(&zf->zf_rwlock, RW_WRITER);
inserted = dmu_zfetch_stream_insert(zf, newstream);
rw_exit(&zf->zf_rwlock);
if (!inserted) {
mutex_destroy(&newstream->zst_lock);
kmem_free(newstream, sizeof (zstream_t));
}
}
}
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zfs_prefetch_disable, int, 0644);
MODULE_PARM_DESC(zfs_prefetch_disable, "Disable all ZFS prefetching");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
module_param(zfetch_max_streams, uint, 0644);
MODULE_PARM_DESC(zfetch_max_streams, "Max number of streams per zfetch");
module_param(zfetch_min_sec_reap, uint, 0644);
MODULE_PARM_DESC(zfetch_min_sec_reap, "Min time before stream reclaim");
module_param(zfetch_block_cap, uint, 0644);
MODULE_PARM_DESC(zfetch_block_cap, "Max number of blocks to fetch at a time");
module_param(zfetch_array_rd_sz, ulong, 0644);
MODULE_PARM_DESC(zfetch_array_rd_sz, "Number of bytes in a array_read");
#endif