mirror_zfs/module/zfs/dmu_recv.c

3390 lines
99 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2011, 2020 by Delphix. All rights reserved.
* Copyright (c) 2014, Joyent, Inc. All rights reserved.
* Copyright 2014 HybridCluster. All rights reserved.
* Copyright (c) 2018, loli10K <ezomori.nozomu@gmail.com>. All rights reserved.
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 20:10:17 +03:00
* Copyright (c) 2019, Klara Inc.
* Copyright (c) 2019, Allan Jude
*/
#include <sys/dmu.h>
#include <sys/dmu_impl.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
#include <sys/dmu_send.h>
#include <sys/dmu_recv.h>
#include <sys/dmu_tx.h>
#include <sys/dbuf.h>
#include <sys/dnode.h>
#include <sys/zfs_context.h>
#include <sys/dmu_objset.h>
#include <sys/dmu_traverse.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_pool.h>
#include <sys/dsl_synctask.h>
#include <sys/zfs_ioctl.h>
#include <sys/zap.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
#include <sys/zvol.h>
#include <sys/zio_checksum.h>
#include <sys/zfs_znode.h>
#include <zfs_fletcher.h>
#include <sys/avl.h>
#include <sys/ddt.h>
#include <sys/zfs_onexit.h>
#include <sys/dsl_destroy.h>
#include <sys/blkptr.h>
#include <sys/dsl_bookmark.h>
#include <sys/zfeature.h>
#include <sys/bqueue.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
#include <sys/objlist.h>
#ifdef _KERNEL
#include <sys/zfs_vfsops.h>
#endif
#include <sys/zfs_file.h>
int zfs_recv_queue_length = SPA_MAXBLOCKSIZE;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
int zfs_recv_queue_ff = 20;
int zfs_recv_write_batch_size = 1024 * 1024;
static char *dmu_recv_tag = "dmu_recv_tag";
const char *recv_clone_name = "%recv";
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static int receive_read_payload_and_next_header(dmu_recv_cookie_t *ra, int len,
void *buf);
struct receive_record_arg {
dmu_replay_record_t header;
void *payload; /* Pointer to a buffer containing the payload */
/*
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
* If the record is a WRITE or SPILL, pointer to the abd containing the
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
* payload.
*/
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_t *abd;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
int payload_size;
uint64_t bytes_read; /* bytes read from stream when record created */
boolean_t eos_marker; /* Marks the end of the stream */
bqueue_node_t node;
};
struct receive_writer_arg {
objset_t *os;
boolean_t byteswap;
bqueue_t q;
/*
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
* These three members are used to signal to the main thread when
* we're done.
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
*/
kmutex_t mutex;
kcondvar_t cv;
boolean_t done;
int err;
boolean_t resumable;
boolean_t raw; /* DMU_BACKUP_FEATURE_RAW set */
boolean_t spill; /* DRR_FLAG_SPILL_BLOCK set */
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
boolean_t full; /* this is a full send stream */
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
uint64_t last_object;
uint64_t last_offset;
uint64_t max_object; /* highest object ID referenced in stream */
uint64_t bytes_read; /* bytes read when current record created */
list_t write_batch;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/* Encryption parameters for the last received DRR_OBJECT_RANGE */
boolean_t or_crypt_params_present;
uint64_t or_firstobj;
uint64_t or_numslots;
uint8_t or_salt[ZIO_DATA_SALT_LEN];
uint8_t or_iv[ZIO_DATA_IV_LEN];
uint8_t or_mac[ZIO_DATA_MAC_LEN];
boolean_t or_byteorder;
};
typedef struct dmu_recv_begin_arg {
const char *drba_origin;
dmu_recv_cookie_t *drba_cookie;
cred_t *drba_cred;
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
proc_t *drba_proc;
dsl_crypto_params_t *drba_dcp;
} dmu_recv_begin_arg_t;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static void
byteswap_record(dmu_replay_record_t *drr)
{
#define DO64(X) (drr->drr_u.X = BSWAP_64(drr->drr_u.X))
#define DO32(X) (drr->drr_u.X = BSWAP_32(drr->drr_u.X))
drr->drr_type = BSWAP_32(drr->drr_type);
drr->drr_payloadlen = BSWAP_32(drr->drr_payloadlen);
switch (drr->drr_type) {
case DRR_BEGIN:
DO64(drr_begin.drr_magic);
DO64(drr_begin.drr_versioninfo);
DO64(drr_begin.drr_creation_time);
DO32(drr_begin.drr_type);
DO32(drr_begin.drr_flags);
DO64(drr_begin.drr_toguid);
DO64(drr_begin.drr_fromguid);
break;
case DRR_OBJECT:
DO64(drr_object.drr_object);
DO32(drr_object.drr_type);
DO32(drr_object.drr_bonustype);
DO32(drr_object.drr_blksz);
DO32(drr_object.drr_bonuslen);
DO32(drr_object.drr_raw_bonuslen);
DO64(drr_object.drr_toguid);
DO64(drr_object.drr_maxblkid);
break;
case DRR_FREEOBJECTS:
DO64(drr_freeobjects.drr_firstobj);
DO64(drr_freeobjects.drr_numobjs);
DO64(drr_freeobjects.drr_toguid);
break;
case DRR_WRITE:
DO64(drr_write.drr_object);
DO32(drr_write.drr_type);
DO64(drr_write.drr_offset);
DO64(drr_write.drr_logical_size);
DO64(drr_write.drr_toguid);
ZIO_CHECKSUM_BSWAP(&drr->drr_u.drr_write.drr_key.ddk_cksum);
DO64(drr_write.drr_key.ddk_prop);
DO64(drr_write.drr_compressed_size);
break;
case DRR_WRITE_EMBEDDED:
DO64(drr_write_embedded.drr_object);
DO64(drr_write_embedded.drr_offset);
DO64(drr_write_embedded.drr_length);
DO64(drr_write_embedded.drr_toguid);
DO32(drr_write_embedded.drr_lsize);
DO32(drr_write_embedded.drr_psize);
break;
case DRR_FREE:
DO64(drr_free.drr_object);
DO64(drr_free.drr_offset);
DO64(drr_free.drr_length);
DO64(drr_free.drr_toguid);
break;
case DRR_SPILL:
DO64(drr_spill.drr_object);
DO64(drr_spill.drr_length);
DO64(drr_spill.drr_toguid);
DO64(drr_spill.drr_compressed_size);
DO32(drr_spill.drr_type);
break;
case DRR_OBJECT_RANGE:
DO64(drr_object_range.drr_firstobj);
DO64(drr_object_range.drr_numslots);
DO64(drr_object_range.drr_toguid);
break;
case DRR_REDACT:
DO64(drr_redact.drr_object);
DO64(drr_redact.drr_offset);
DO64(drr_redact.drr_length);
DO64(drr_redact.drr_toguid);
break;
case DRR_END:
DO64(drr_end.drr_toguid);
ZIO_CHECKSUM_BSWAP(&drr->drr_u.drr_end.drr_checksum);
break;
default:
break;
}
if (drr->drr_type != DRR_BEGIN) {
ZIO_CHECKSUM_BSWAP(&drr->drr_u.drr_checksum.drr_checksum);
}
#undef DO64
#undef DO32
}
static boolean_t
redact_snaps_contains(uint64_t *snaps, uint64_t num_snaps, uint64_t guid)
{
for (int i = 0; i < num_snaps; i++) {
if (snaps[i] == guid)
return (B_TRUE);
}
return (B_FALSE);
}
/*
* Check that the new stream we're trying to receive is redacted with respect to
* a subset of the snapshots that the origin was redacted with respect to. For
* the reasons behind this, see the man page on redacted zfs sends and receives.
*/
static boolean_t
compatible_redact_snaps(uint64_t *origin_snaps, uint64_t origin_num_snaps,
uint64_t *redact_snaps, uint64_t num_redact_snaps)
{
/*
* Short circuit the comparison; if we are redacted with respect to
* more snapshots than the origin, we can't be redacted with respect
* to a subset.
*/
if (num_redact_snaps > origin_num_snaps) {
return (B_FALSE);
}
for (int i = 0; i < num_redact_snaps; i++) {
if (!redact_snaps_contains(origin_snaps, origin_num_snaps,
redact_snaps[i])) {
return (B_FALSE);
}
}
return (B_TRUE);
}
static boolean_t
redact_check(dmu_recv_begin_arg_t *drba, dsl_dataset_t *origin)
{
uint64_t *origin_snaps;
uint64_t origin_num_snaps;
dmu_recv_cookie_t *drc = drba->drba_cookie;
struct drr_begin *drrb = drc->drc_drrb;
int featureflags = DMU_GET_FEATUREFLAGS(drrb->drr_versioninfo);
int err = 0;
boolean_t ret = B_TRUE;
uint64_t *redact_snaps;
uint_t numredactsnaps;
/*
* If this is a full send stream, we're safe no matter what.
*/
if (drrb->drr_fromguid == 0)
return (ret);
VERIFY(dsl_dataset_get_uint64_array_feature(origin,
SPA_FEATURE_REDACTED_DATASETS, &origin_num_snaps, &origin_snaps));
if (nvlist_lookup_uint64_array(drc->drc_begin_nvl,
BEGINNV_REDACT_FROM_SNAPS, &redact_snaps, &numredactsnaps) ==
0) {
/*
* If the send stream was sent from the redaction bookmark or
* the redacted version of the dataset, then we're safe. Verify
* that this is from the a compatible redaction bookmark or
* redacted dataset.
*/
if (!compatible_redact_snaps(origin_snaps, origin_num_snaps,
redact_snaps, numredactsnaps)) {
err = EINVAL;
}
} else if (featureflags & DMU_BACKUP_FEATURE_REDACTED) {
/*
* If the stream is redacted, it must be redacted with respect
* to a subset of what the origin is redacted with respect to.
* See case number 2 in the zfs man page section on redacted zfs
* send.
*/
err = nvlist_lookup_uint64_array(drc->drc_begin_nvl,
BEGINNV_REDACT_SNAPS, &redact_snaps, &numredactsnaps);
if (err != 0 || !compatible_redact_snaps(origin_snaps,
origin_num_snaps, redact_snaps, numredactsnaps)) {
err = EINVAL;
}
} else if (!redact_snaps_contains(origin_snaps, origin_num_snaps,
drrb->drr_toguid)) {
/*
* If the stream isn't redacted but the origin is, this must be
* one of the snapshots the origin is redacted with respect to.
* See case number 1 in the zfs man page section on redacted zfs
* send.
*/
err = EINVAL;
}
if (err != 0)
ret = B_FALSE;
return (ret);
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
/*
* If we previously received a stream with --large-block, we don't support
* receiving an incremental on top of it without --large-block. This avoids
* forcing a read-modify-write or trying to re-aggregate a string of WRITE
* records.
*/
static int
recv_check_large_blocks(dsl_dataset_t *ds, uint64_t featureflags)
{
if (dsl_dataset_feature_is_active(ds, SPA_FEATURE_LARGE_BLOCKS) &&
!(featureflags & DMU_BACKUP_FEATURE_LARGE_BLOCKS))
return (SET_ERROR(ZFS_ERR_STREAM_LARGE_BLOCK_MISMATCH));
return (0);
}
static int
recv_begin_check_existing_impl(dmu_recv_begin_arg_t *drba, dsl_dataset_t *ds,
uint64_t fromguid, uint64_t featureflags)
{
uint64_t val;
uint64_t children;
int error;
dsl_pool_t *dp = ds->ds_dir->dd_pool;
boolean_t encrypted = ds->ds_dir->dd_crypto_obj != 0;
boolean_t raw = (featureflags & DMU_BACKUP_FEATURE_RAW) != 0;
boolean_t embed = (featureflags & DMU_BACKUP_FEATURE_EMBED_DATA) != 0;
/* Temporary clone name must not exist. */
error = zap_lookup(dp->dp_meta_objset,
dsl_dir_phys(ds->ds_dir)->dd_child_dir_zapobj, recv_clone_name,
8, 1, &val);
if (error != ENOENT)
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
return (error == 0 ? SET_ERROR(EBUSY) : error);
/* Resume state must not be set. */
if (dsl_dataset_has_resume_receive_state(ds))
return (SET_ERROR(EBUSY));
/* New snapshot name must not exist. */
error = zap_lookup(dp->dp_meta_objset,
dsl_dataset_phys(ds)->ds_snapnames_zapobj,
drba->drba_cookie->drc_tosnap, 8, 1, &val);
if (error != ENOENT)
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
return (error == 0 ? SET_ERROR(EEXIST) : error);
/* Must not have children if receiving a ZVOL. */
error = zap_count(dp->dp_meta_objset,
dsl_dir_phys(ds->ds_dir)->dd_child_dir_zapobj, &children);
if (error != 0)
return (error);
if (drba->drba_cookie->drc_drrb->drr_type != DMU_OST_ZFS &&
children > 0)
return (SET_ERROR(ZFS_ERR_WRONG_PARENT));
/*
* Check snapshot limit before receiving. We'll recheck again at the
* end, but might as well abort before receiving if we're already over
* the limit.
*
* Note that we do not check the file system limit with
* dsl_dir_fscount_check because the temporary %clones don't count
* against that limit.
*/
error = dsl_fs_ss_limit_check(ds->ds_dir, 1, ZFS_PROP_SNAPSHOT_LIMIT,
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
NULL, drba->drba_cred, drba->drba_proc);
if (error != 0)
return (error);
if (fromguid != 0) {
dsl_dataset_t *snap;
uint64_t obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/* Can't perform a raw receive on top of a non-raw receive */
if (!encrypted && raw)
return (SET_ERROR(EINVAL));
/* Encryption is incompatible with embedded data */
if (encrypted && embed)
return (SET_ERROR(EINVAL));
/* Find snapshot in this dir that matches fromguid. */
while (obj != 0) {
error = dsl_dataset_hold_obj(dp, obj, FTAG,
&snap);
if (error != 0)
return (SET_ERROR(ENODEV));
if (snap->ds_dir != ds->ds_dir) {
dsl_dataset_rele(snap, FTAG);
return (SET_ERROR(ENODEV));
}
if (dsl_dataset_phys(snap)->ds_guid == fromguid)
break;
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_dataset_rele(snap, FTAG);
}
if (obj == 0)
return (SET_ERROR(ENODEV));
if (drba->drba_cookie->drc_force) {
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
drba->drba_cookie->drc_fromsnapobj = obj;
} else {
/*
* If we are not forcing, there must be no
* changes since fromsnap. Raw sends have an
* additional constraint that requires that
* no "noop" snapshots exist between fromsnap
* and tosnap for the IVset checking code to
* work properly.
*/
if (dsl_dataset_modified_since_snap(ds, snap) ||
(raw &&
dsl_dataset_phys(ds)->ds_prev_snap_obj !=
snap->ds_object)) {
dsl_dataset_rele(snap, FTAG);
return (SET_ERROR(ETXTBSY));
}
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
drba->drba_cookie->drc_fromsnapobj =
ds->ds_prev->ds_object;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (dsl_dataset_feature_is_active(snap,
SPA_FEATURE_REDACTED_DATASETS) && !redact_check(drba,
snap)) {
dsl_dataset_rele(snap, FTAG);
return (SET_ERROR(EINVAL));
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
error = recv_check_large_blocks(snap, featureflags);
if (error != 0) {
dsl_dataset_rele(snap, FTAG);
return (error);
}
dsl_dataset_rele(snap, FTAG);
} else {
/* if full, then must be forced */
if (!drba->drba_cookie->drc_force)
return (SET_ERROR(EEXIST));
/*
* We don't support using zfs recv -F to blow away
* encrypted filesystems. This would require the
* dsl dir to point to the old encryption key and
* the new one at the same time during the receive.
*/
if ((!encrypted && raw) || encrypted)
return (SET_ERROR(EINVAL));
/*
* Perform the same encryption checks we would if
* we were creating a new dataset from scratch.
*/
if (!raw) {
boolean_t will_encrypt;
error = dmu_objset_create_crypt_check(
ds->ds_dir->dd_parent, drba->drba_dcp,
&will_encrypt);
if (error != 0)
return (error);
if (will_encrypt && embed)
return (SET_ERROR(EINVAL));
}
}
return (0);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* Check that any feature flags used in the data stream we're receiving are
* supported by the pool we are receiving into.
*
* Note that some of the features we explicitly check here have additional
* (implicit) features they depend on, but those dependencies are enforced
* through the zfeature_register() calls declaring the features that we
* explicitly check.
*/
static int
recv_begin_check_feature_flags_impl(uint64_t featureflags, spa_t *spa)
{
/*
* Check if there are any unsupported feature flags.
*/
if (!DMU_STREAM_SUPPORTED(featureflags)) {
return (SET_ERROR(ZFS_ERR_UNKNOWN_SEND_STREAM_FEATURE));
}
/* Verify pool version supports SA if SA_SPILL feature set */
if ((featureflags & DMU_BACKUP_FEATURE_SA_SPILL) &&
spa_version(spa) < SPA_VERSION_SA)
return (SET_ERROR(ENOTSUP));
/*
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 20:10:17 +03:00
* LZ4 compressed, ZSTD compressed, embedded, mooched, large blocks,
* and large_dnodes in the stream can only be used if those pool
* features are enabled because we don't attempt to decompress /
* un-embed / un-mooch / split up the blocks / dnodes during the
* receive process.
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
*/
if ((featureflags & DMU_BACKUP_FEATURE_LZ4) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_LZ4_COMPRESS))
return (SET_ERROR(ENOTSUP));
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 20:10:17 +03:00
if ((featureflags & DMU_BACKUP_FEATURE_ZSTD) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_ZSTD_COMPRESS))
return (SET_ERROR(ENOTSUP));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if ((featureflags & DMU_BACKUP_FEATURE_EMBED_DATA) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_EMBEDDED_DATA))
return (SET_ERROR(ENOTSUP));
if ((featureflags & DMU_BACKUP_FEATURE_LARGE_BLOCKS) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS))
return (SET_ERROR(ENOTSUP));
if ((featureflags & DMU_BACKUP_FEATURE_LARGE_DNODE) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE))
return (SET_ERROR(ENOTSUP));
/*
* Receiving redacted streams requires that redacted datasets are
* enabled.
*/
if ((featureflags & DMU_BACKUP_FEATURE_REDACTED) &&
!spa_feature_is_enabled(spa, SPA_FEATURE_REDACTED_DATASETS))
return (SET_ERROR(ENOTSUP));
return (0);
}
static int
dmu_recv_begin_check(void *arg, dmu_tx_t *tx)
{
dmu_recv_begin_arg_t *drba = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
struct drr_begin *drrb = drba->drba_cookie->drc_drrb;
uint64_t fromguid = drrb->drr_fromguid;
int flags = drrb->drr_flags;
ds_hold_flags_t dsflags = DS_HOLD_FLAG_NONE;
int error;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
uint64_t featureflags = drba->drba_cookie->drc_featureflags;
dsl_dataset_t *ds;
const char *tofs = drba->drba_cookie->drc_tofs;
/* already checked */
ASSERT3U(drrb->drr_magic, ==, DMU_BACKUP_MAGIC);
ASSERT(!(featureflags & DMU_BACKUP_FEATURE_RESUMING));
if (DMU_GET_STREAM_HDRTYPE(drrb->drr_versioninfo) ==
DMU_COMPOUNDSTREAM ||
drrb->drr_type >= DMU_OST_NUMTYPES ||
((flags & DRR_FLAG_CLONE) && drba->drba_origin == NULL))
return (SET_ERROR(EINVAL));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
error = recv_begin_check_feature_flags_impl(featureflags, dp->dp_spa);
if (error != 0)
return (error);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/* Resumable receives require extensible datasets */
if (drba->drba_cookie->drc_resumable &&
!spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_EXTENSIBLE_DATASET))
return (SET_ERROR(ENOTSUP));
if (featureflags & DMU_BACKUP_FEATURE_RAW) {
/* raw receives require the encryption feature */
if (!spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_ENCRYPTION))
return (SET_ERROR(ENOTSUP));
/* embedded data is incompatible with encryption and raw recv */
if (featureflags & DMU_BACKUP_FEATURE_EMBED_DATA)
return (SET_ERROR(EINVAL));
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/* raw receives require spill block allocation flag */
if (!(flags & DRR_FLAG_SPILL_BLOCK))
return (SET_ERROR(ZFS_ERR_SPILL_BLOCK_FLAG_MISSING));
} else {
dsflags |= DS_HOLD_FLAG_DECRYPT;
}
error = dsl_dataset_hold_flags(dp, tofs, dsflags, FTAG, &ds);
if (error == 0) {
/* target fs already exists; recv into temp clone */
/* Can't recv a clone into an existing fs */
if (flags & DRR_FLAG_CLONE || drba->drba_origin) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
error = recv_begin_check_existing_impl(drba, ds, fromguid,
featureflags);
dsl_dataset_rele_flags(ds, dsflags, FTAG);
} else if (error == ENOENT) {
/* target fs does not exist; must be a full backup or clone */
char buf[ZFS_MAX_DATASET_NAME_LEN];
objset_t *os;
/*
* If it's a non-clone incremental, we are missing the
* target fs, so fail the recv.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (fromguid != 0 && !((flags & DRR_FLAG_CLONE) ||
drba->drba_origin))
return (SET_ERROR(ENOENT));
/*
* If we're receiving a full send as a clone, and it doesn't
* contain all the necessary free records and freeobject
* records, reject it.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (fromguid == 0 && drba->drba_origin != NULL &&
!(flags & DRR_FLAG_FREERECORDS))
return (SET_ERROR(EINVAL));
/* Open the parent of tofs */
ASSERT3U(strlen(tofs), <, sizeof (buf));
(void) strlcpy(buf, tofs, strrchr(tofs, '/') - tofs + 1);
error = dsl_dataset_hold(dp, buf, FTAG, &ds);
if (error != 0)
return (error);
if ((featureflags & DMU_BACKUP_FEATURE_RAW) == 0 &&
drba->drba_origin == NULL) {
boolean_t will_encrypt;
/*
* Check that we aren't breaking any encryption rules
* and that we have all the parameters we need to
* create an encrypted dataset if necessary. If we are
* making an encrypted dataset the stream can't have
* embedded data.
*/
error = dmu_objset_create_crypt_check(ds->ds_dir,
drba->drba_dcp, &will_encrypt);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
if (will_encrypt &&
(featureflags & DMU_BACKUP_FEATURE_EMBED_DATA)) {
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(EINVAL));
}
}
/*
* Check filesystem and snapshot limits before receiving. We'll
* recheck snapshot limits again at the end (we create the
* filesystems and increment those counts during begin_sync).
*/
error = dsl_fs_ss_limit_check(ds->ds_dir, 1,
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
ZFS_PROP_FILESYSTEM_LIMIT, NULL,
drba->drba_cred, drba->drba_proc);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
error = dsl_fs_ss_limit_check(ds->ds_dir, 1,
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
ZFS_PROP_SNAPSHOT_LIMIT, NULL,
drba->drba_cred, drba->drba_proc);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
/* can't recv below anything but filesystems (eg. no ZVOLs) */
error = dmu_objset_from_ds(ds, &os);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
if (dmu_objset_type(os) != DMU_OST_ZFS) {
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(ZFS_ERR_WRONG_PARENT));
}
if (drba->drba_origin != NULL) {
dsl_dataset_t *origin;
error = dsl_dataset_hold_flags(dp, drba->drba_origin,
dsflags, FTAG, &origin);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
if (!origin->ds_is_snapshot) {
dsl_dataset_rele_flags(origin, dsflags, FTAG);
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(EINVAL));
}
if (dsl_dataset_phys(origin)->ds_guid != fromguid &&
fromguid != 0) {
dsl_dataset_rele_flags(origin, dsflags, FTAG);
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(ENODEV));
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (origin->ds_dir->dd_crypto_obj != 0 &&
(featureflags & DMU_BACKUP_FEATURE_EMBED_DATA)) {
dsl_dataset_rele_flags(origin, dsflags, FTAG);
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(EINVAL));
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* If the origin is redacted we need to verify that this
* send stream can safely be received on top of the
* origin.
*/
if (dsl_dataset_feature_is_active(origin,
SPA_FEATURE_REDACTED_DATASETS)) {
if (!redact_check(drba, origin)) {
dsl_dataset_rele_flags(origin, dsflags,
FTAG);
dsl_dataset_rele_flags(ds, dsflags,
FTAG);
return (SET_ERROR(EINVAL));
}
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
error = recv_check_large_blocks(ds, featureflags);
if (error != 0) {
dsl_dataset_rele_flags(origin, dsflags, FTAG);
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (error);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dsl_dataset_rele_flags(origin, dsflags, FTAG);
}
dsl_dataset_rele(ds, FTAG);
error = 0;
}
return (error);
}
static void
dmu_recv_begin_sync(void *arg, dmu_tx_t *tx)
{
dmu_recv_begin_arg_t *drba = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
objset_t *mos = dp->dp_meta_objset;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dmu_recv_cookie_t *drc = drba->drba_cookie;
struct drr_begin *drrb = drc->drc_drrb;
const char *tofs = drc->drc_tofs;
uint64_t featureflags = drc->drc_featureflags;
dsl_dataset_t *ds, *newds;
objset_t *os;
uint64_t dsobj;
ds_hold_flags_t dsflags = DS_HOLD_FLAG_NONE;
int error;
uint64_t crflags = 0;
dsl_crypto_params_t dummy_dcp = { 0 };
dsl_crypto_params_t *dcp = drba->drba_dcp;
if (drrb->drr_flags & DRR_FLAG_CI_DATA)
crflags |= DS_FLAG_CI_DATASET;
if ((featureflags & DMU_BACKUP_FEATURE_RAW) == 0)
dsflags |= DS_HOLD_FLAG_DECRYPT;
/*
* Raw, non-incremental recvs always use a dummy dcp with
* the raw cmd set. Raw incremental recvs do not use a dcp
* since the encryption parameters are already set in stone.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (dcp == NULL && drrb->drr_fromguid == 0 &&
drba->drba_origin == NULL) {
ASSERT3P(dcp, ==, NULL);
dcp = &dummy_dcp;
if (featureflags & DMU_BACKUP_FEATURE_RAW)
dcp->cp_cmd = DCP_CMD_RAW_RECV;
}
error = dsl_dataset_hold_flags(dp, tofs, dsflags, FTAG, &ds);
if (error == 0) {
/* create temporary clone */
dsl_dataset_t *snap = NULL;
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
if (drba->drba_cookie->drc_fromsnapobj != 0) {
VERIFY0(dsl_dataset_hold_obj(dp,
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
drba->drba_cookie->drc_fromsnapobj, FTAG, &snap));
ASSERT3P(dcp, ==, NULL);
}
dsobj = dsl_dataset_create_sync(ds->ds_dir, recv_clone_name,
snap, crflags, drba->drba_cred, dcp, tx);
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
if (drba->drba_cookie->drc_fromsnapobj != 0)
dsl_dataset_rele(snap, FTAG);
dsl_dataset_rele_flags(ds, dsflags, FTAG);
} else {
dsl_dir_t *dd;
const char *tail;
dsl_dataset_t *origin = NULL;
VERIFY0(dsl_dir_hold(dp, tofs, FTAG, &dd, &tail));
if (drba->drba_origin != NULL) {
VERIFY0(dsl_dataset_hold(dp, drba->drba_origin,
FTAG, &origin));
ASSERT3P(dcp, ==, NULL);
}
/* Create new dataset. */
dsobj = dsl_dataset_create_sync(dd, strrchr(tofs, '/') + 1,
origin, crflags, drba->drba_cred, dcp, tx);
if (origin != NULL)
dsl_dataset_rele(origin, FTAG);
dsl_dir_rele(dd, FTAG);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_newfs = B_TRUE;
}
VERIFY0(dsl_dataset_own_obj_force(dp, dsobj, dsflags, dmu_recv_tag,
&newds));
if (dsl_dataset_feature_is_active(newds,
SPA_FEATURE_REDACTED_DATASETS)) {
/*
* If the origin dataset is redacted, the child will be redacted
* when we create it. We clear the new dataset's
* redaction info; if it should be redacted, we'll fill
* in its information later.
*/
dsl_dataset_deactivate_feature(newds,
SPA_FEATURE_REDACTED_DATASETS, tx);
}
VERIFY0(dmu_objset_from_ds(newds, &os));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_resumable) {
dsl_dataset_zapify(newds, tx);
if (drrb->drr_fromguid != 0) {
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_FROMGUID,
8, 1, &drrb->drr_fromguid, tx));
}
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_TOGUID,
8, 1, &drrb->drr_toguid, tx));
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_TONAME,
1, strlen(drrb->drr_toname) + 1, drrb->drr_toname, tx));
uint64_t one = 1;
uint64_t zero = 0;
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_OBJECT,
8, 1, &one, tx));
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_OFFSET,
8, 1, &zero, tx));
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_BYTES,
8, 1, &zero, tx));
if (featureflags & DMU_BACKUP_FEATURE_LARGE_BLOCKS) {
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_LARGEBLOCK,
8, 1, &one, tx));
}
if (featureflags & DMU_BACKUP_FEATURE_EMBED_DATA) {
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_EMBEDOK,
8, 1, &one, tx));
}
if (featureflags & DMU_BACKUP_FEATURE_COMPRESSED) {
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_COMPRESSOK,
8, 1, &one, tx));
}
if (featureflags & DMU_BACKUP_FEATURE_RAW) {
VERIFY0(zap_add(mos, dsobj, DS_FIELD_RESUME_RAWOK,
8, 1, &one, tx));
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
uint64_t *redact_snaps;
uint_t numredactsnaps;
if (nvlist_lookup_uint64_array(drc->drc_begin_nvl,
BEGINNV_REDACT_FROM_SNAPS, &redact_snaps,
&numredactsnaps) == 0) {
VERIFY0(zap_add(mos, dsobj,
DS_FIELD_RESUME_REDACT_BOOKMARK_SNAPS,
sizeof (*redact_snaps), numredactsnaps,
redact_snaps, tx));
}
}
/*
* Usually the os->os_encrypted value is tied to the presence of a
* DSL Crypto Key object in the dd. However, that will not be received
* until dmu_recv_stream(), so we set the value manually for now.
*/
if (featureflags & DMU_BACKUP_FEATURE_RAW) {
os->os_encrypted = B_TRUE;
drba->drba_cookie->drc_raw = B_TRUE;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (featureflags & DMU_BACKUP_FEATURE_REDACTED) {
uint64_t *redact_snaps;
uint_t numredactsnaps;
VERIFY0(nvlist_lookup_uint64_array(drc->drc_begin_nvl,
BEGINNV_REDACT_SNAPS, &redact_snaps, &numredactsnaps));
dsl_dataset_activate_redaction(newds, redact_snaps,
numredactsnaps, tx);
}
dmu_buf_will_dirty(newds->ds_dbuf, tx);
dsl_dataset_phys(newds)->ds_flags |= DS_FLAG_INCONSISTENT;
/*
* If we actually created a non-clone, we need to create the objset
* in our new dataset. If this is a raw send we postpone this until
* dmu_recv_stream() so that we can allocate the metadnode with the
* properties from the DRR_BEGIN payload.
*/
rrw_enter(&newds->ds_bp_rwlock, RW_READER, FTAG);
if (BP_IS_HOLE(dsl_dataset_get_blkptr(newds)) &&
(featureflags & DMU_BACKUP_FEATURE_RAW) == 0) {
(void) dmu_objset_create_impl(dp->dp_spa,
newds, dsl_dataset_get_blkptr(newds), drrb->drr_type, tx);
}
rrw_exit(&newds->ds_bp_rwlock, FTAG);
drba->drba_cookie->drc_ds = newds;
dmu_objset_from_ds must be called with dp_config_rwlock held The normal lock order is that the dp_config_rwlock must be held before the ds_opening_lock. For example, dmu_objset_hold() does this. However, dmu_objset_open_impl() is called with the ds_opening_lock held, and if the dp_config_rwlock is not already held, it will attempt to acquire it. This may lead to deadlock, since the lock order is reversed. Looking at all the callers of dmu_objset_open_impl() (which is principally the callers of dmu_objset_from_ds()), almost all callers already have the dp_config_rwlock. However, there are a few places in the send and receive code paths that do not. For example: dsl_crypto_populate_key_nvlist, send_cb, dmu_recv_stream, receive_write_byref, redact_traverse_thread. This commit resolves the problem by requiring all callers ot dmu_objset_from_ds() to hold the dp_config_rwlock. In most cases, the code has been restructured such that we call dmu_objset_from_ds() earlier on in the send and receive processes, when we already have the dp_config_rwlock, and save the objset_t until we need it in the middle of the send or receive (similar to what we already do with the dsl_dataset_t). Thus we do not need to acquire the dp_config_rwlock in many new places. I also cleaned up code in dmu_redact_snap() and send_traverse_thread(). Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #9662 Closes #10115
2020-03-12 20:55:02 +03:00
drba->drba_cookie->drc_os = os;
spa_history_log_internal_ds(newds, "receive", tx, " ");
}
static int
dmu_recv_resume_begin_check(void *arg, dmu_tx_t *tx)
{
dmu_recv_begin_arg_t *drba = arg;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dmu_recv_cookie_t *drc = drba->drba_cookie;
dsl_pool_t *dp = dmu_tx_pool(tx);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct drr_begin *drrb = drc->drc_drrb;
int error;
ds_hold_flags_t dsflags = DS_HOLD_FLAG_NONE;
dsl_dataset_t *ds;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
const char *tofs = drc->drc_tofs;
/* already checked */
ASSERT3U(drrb->drr_magic, ==, DMU_BACKUP_MAGIC);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT(drc->drc_featureflags & DMU_BACKUP_FEATURE_RESUMING);
if (DMU_GET_STREAM_HDRTYPE(drrb->drr_versioninfo) ==
DMU_COMPOUNDSTREAM ||
drrb->drr_type >= DMU_OST_NUMTYPES)
return (SET_ERROR(EINVAL));
/*
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
* This is mostly a sanity check since we should have already done these
* checks during a previous attempt to receive the data.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
error = recv_begin_check_feature_flags_impl(drc->drc_featureflags,
dp->dp_spa);
if (error != 0)
return (error);
/* 6 extra bytes for /%recv */
char recvname[ZFS_MAX_DATASET_NAME_LEN + 6];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) snprintf(recvname, sizeof (recvname), "%s/%s",
tofs, recv_clone_name);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_featureflags & DMU_BACKUP_FEATURE_RAW) {
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/* raw receives require spill block allocation flag */
if (!(drrb->drr_flags & DRR_FLAG_SPILL_BLOCK))
return (SET_ERROR(ZFS_ERR_SPILL_BLOCK_FLAG_MISSING));
} else {
dsflags |= DS_HOLD_FLAG_DECRYPT;
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
}
if (dsl_dataset_hold_flags(dp, recvname, dsflags, FTAG, &ds) != 0) {
/* %recv does not exist; continue in tofs */
error = dsl_dataset_hold_flags(dp, tofs, dsflags, FTAG, &ds);
if (error != 0)
return (error);
}
/* check that ds is marked inconsistent */
if (!DS_IS_INCONSISTENT(ds)) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
/* check that there is resuming data, and that the toguid matches */
if (!dsl_dataset_is_zapified(ds)) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
uint64_t val;
error = zap_lookup(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_TOGUID, sizeof (val), 1, &val);
if (error != 0 || drrb->drr_toguid != val) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
/*
* Check if the receive is still running. If so, it will be owned.
* Note that nothing else can own the dataset (e.g. after the receive
* fails) because it will be marked inconsistent.
*/
if (dsl_dataset_has_owner(ds)) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EBUSY));
}
/* There should not be any snapshots of this fs yet. */
if (ds->ds_prev != NULL && ds->ds_prev->ds_dir == ds->ds_dir) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
/*
* Note: resume point will be checked when we process the first WRITE
* record.
*/
/* check that the origin matches */
val = 0;
(void) zap_lookup(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_FROMGUID, sizeof (val), 1, &val);
if (drrb->drr_fromguid != val) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
if (ds->ds_prev != NULL && drrb->drr_fromguid != 0)
drc->drc_fromsnapobj = ds->ds_prev->ds_object;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* If we're resuming, and the send is redacted, then the original send
* must have been redacted, and must have been redacted with respect to
* the same snapshots.
*/
if (drc->drc_featureflags & DMU_BACKUP_FEATURE_REDACTED) {
uint64_t num_ds_redact_snaps;
uint64_t *ds_redact_snaps;
uint_t num_stream_redact_snaps;
uint64_t *stream_redact_snaps;
if (nvlist_lookup_uint64_array(drc->drc_begin_nvl,
BEGINNV_REDACT_SNAPS, &stream_redact_snaps,
&num_stream_redact_snaps) != 0) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
if (!dsl_dataset_get_uint64_array_feature(ds,
SPA_FEATURE_REDACTED_DATASETS, &num_ds_redact_snaps,
&ds_redact_snaps)) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
for (int i = 0; i < num_ds_redact_snaps; i++) {
if (!redact_snaps_contains(ds_redact_snaps,
num_ds_redact_snaps, stream_redact_snaps[i])) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (SET_ERROR(EINVAL));
}
}
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
error = recv_check_large_blocks(ds, drc->drc_featureflags);
if (error != 0) {
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (error);
}
dsl_dataset_rele_flags(ds, dsflags, FTAG);
return (0);
}
static void
dmu_recv_resume_begin_sync(void *arg, dmu_tx_t *tx)
{
dmu_recv_begin_arg_t *drba = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
const char *tofs = drba->drba_cookie->drc_tofs;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
uint64_t featureflags = drba->drba_cookie->drc_featureflags;
dsl_dataset_t *ds;
ds_hold_flags_t dsflags = DS_HOLD_FLAG_NONE;
/* 6 extra bytes for /%recv */
char recvname[ZFS_MAX_DATASET_NAME_LEN + 6];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) snprintf(recvname, sizeof (recvname), "%s/%s", tofs,
recv_clone_name);
if (featureflags & DMU_BACKUP_FEATURE_RAW) {
drba->drba_cookie->drc_raw = B_TRUE;
} else {
dsflags |= DS_HOLD_FLAG_DECRYPT;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (dsl_dataset_own_force(dp, recvname, dsflags, dmu_recv_tag, &ds)
!= 0) {
/* %recv does not exist; continue in tofs */
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
VERIFY0(dsl_dataset_own_force(dp, tofs, dsflags, dmu_recv_tag,
&ds));
drba->drba_cookie->drc_newfs = B_TRUE;
}
ASSERT(DS_IS_INCONSISTENT(ds));
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
ASSERT(!BP_IS_HOLE(dsl_dataset_get_blkptr(ds)) ||
drba->drba_cookie->drc_raw);
rrw_exit(&ds->ds_bp_rwlock, FTAG);
drba->drba_cookie->drc_ds = ds;
dmu_objset_from_ds must be called with dp_config_rwlock held The normal lock order is that the dp_config_rwlock must be held before the ds_opening_lock. For example, dmu_objset_hold() does this. However, dmu_objset_open_impl() is called with the ds_opening_lock held, and if the dp_config_rwlock is not already held, it will attempt to acquire it. This may lead to deadlock, since the lock order is reversed. Looking at all the callers of dmu_objset_open_impl() (which is principally the callers of dmu_objset_from_ds()), almost all callers already have the dp_config_rwlock. However, there are a few places in the send and receive code paths that do not. For example: dsl_crypto_populate_key_nvlist, send_cb, dmu_recv_stream, receive_write_byref, redact_traverse_thread. This commit resolves the problem by requiring all callers ot dmu_objset_from_ds() to hold the dp_config_rwlock. In most cases, the code has been restructured such that we call dmu_objset_from_ds() earlier on in the send and receive processes, when we already have the dp_config_rwlock, and save the objset_t until we need it in the middle of the send or receive (similar to what we already do with the dsl_dataset_t). Thus we do not need to acquire the dp_config_rwlock in many new places. I also cleaned up code in dmu_redact_snap() and send_traverse_thread(). Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #9662 Closes #10115
2020-03-12 20:55:02 +03:00
VERIFY0(dmu_objset_from_ds(ds, &drba->drba_cookie->drc_os));
drba->drba_cookie->drc_should_save = B_TRUE;
spa_history_log_internal_ds(ds, "resume receive", tx, " ");
}
/*
* NB: callers *MUST* call dmu_recv_stream() if dmu_recv_begin()
* succeeds; otherwise we will leak the holds on the datasets.
*/
int
dmu_recv_begin(char *tofs, char *tosnap, dmu_replay_record_t *drr_begin,
boolean_t force, boolean_t resumable, nvlist_t *localprops,
nvlist_t *hidden_args, char *origin, dmu_recv_cookie_t *drc,
zfs_file_t *fp, offset_t *voffp)
{
dmu_recv_begin_arg_t drba = { 0 };
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
int err;
bzero(drc, sizeof (dmu_recv_cookie_t));
drc->drc_drr_begin = drr_begin;
drc->drc_drrb = &drr_begin->drr_u.drr_begin;
drc->drc_tosnap = tosnap;
drc->drc_tofs = tofs;
drc->drc_force = force;
drc->drc_resumable = resumable;
drc->drc_cred = CRED();
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
drc->drc_proc = curproc;
drc->drc_clone = (origin != NULL);
if (drc->drc_drrb->drr_magic == BSWAP_64(DMU_BACKUP_MAGIC)) {
drc->drc_byteswap = B_TRUE;
(void) fletcher_4_incremental_byteswap(drr_begin,
sizeof (dmu_replay_record_t), &drc->drc_cksum);
byteswap_record(drr_begin);
} else if (drc->drc_drrb->drr_magic == DMU_BACKUP_MAGIC) {
(void) fletcher_4_incremental_native(drr_begin,
sizeof (dmu_replay_record_t), &drc->drc_cksum);
} else {
return (SET_ERROR(EINVAL));
}
drc->drc_fp = fp;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_voff = *voffp;
drc->drc_featureflags =
DMU_GET_FEATUREFLAGS(drc->drc_drrb->drr_versioninfo);
uint32_t payloadlen = drc->drc_drr_begin->drr_payloadlen;
void *payload = NULL;
if (payloadlen != 0)
payload = kmem_alloc(payloadlen, KM_SLEEP);
err = receive_read_payload_and_next_header(drc, payloadlen,
payload);
if (err != 0) {
kmem_free(payload, payloadlen);
return (err);
}
if (payloadlen != 0) {
err = nvlist_unpack(payload, payloadlen, &drc->drc_begin_nvl,
KM_SLEEP);
kmem_free(payload, payloadlen);
if (err != 0) {
kmem_free(drc->drc_next_rrd,
sizeof (*drc->drc_next_rrd));
return (err);
}
}
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
if (drc->drc_drrb->drr_flags & DRR_FLAG_SPILL_BLOCK)
drc->drc_spill = B_TRUE;
drba.drba_origin = origin;
drba.drba_cookie = drc;
drba.drba_cred = CRED();
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
drba.drba_proc = curproc;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_featureflags & DMU_BACKUP_FEATURE_RESUMING) {
err = dsl_sync_task(tofs,
dmu_recv_resume_begin_check, dmu_recv_resume_begin_sync,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
&drba, 5, ZFS_SPACE_CHECK_NORMAL);
} else {
/*
* For non-raw, non-incremental, non-resuming receives the
* user can specify encryption parameters on the command line
* with "zfs recv -o". For these receives we create a dcp and
* pass it to the sync task. Creating the dcp will implicitly
* remove the encryption params from the localprops nvlist,
* which avoids errors when trying to set these normally
* read-only properties. Any other kind of receive that
* attempts to set these properties will fail as a result.
*/
if ((DMU_GET_FEATUREFLAGS(drc->drc_drrb->drr_versioninfo) &
DMU_BACKUP_FEATURE_RAW) == 0 &&
origin == NULL && drc->drc_drrb->drr_fromguid == 0) {
err = dsl_crypto_params_create_nvlist(DCP_CMD_NONE,
localprops, hidden_args, &drba.drba_dcp);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (err == 0) {
err = dsl_sync_task(tofs,
dmu_recv_begin_check, dmu_recv_begin_sync,
&drba, 5, ZFS_SPACE_CHECK_NORMAL);
dsl_crypto_params_free(drba.drba_dcp, !!err);
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (err != 0) {
kmem_free(drc->drc_next_rrd, sizeof (*drc->drc_next_rrd));
nvlist_free(drc->drc_begin_nvl);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
return (err);
}
static int
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read(dmu_recv_cookie_t *drc, int len, void *buf)
{
int done = 0;
/*
* The code doesn't rely on this (lengths being multiples of 8). See
* comment in dump_bytes.
*/
ASSERT(len % 8 == 0 ||
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(drc->drc_featureflags & DMU_BACKUP_FEATURE_RAW) != 0);
while (done < len) {
ssize_t resid;
zfs_file_t *fp = drc->drc_fp;
int err = zfs_file_read(fp, (char *)buf + done,
len - done, &resid);
if (resid == len - done) {
/*
* Note: ECKSUM or ZFS_ERR_STREAM_TRUNCATED indicates
* that the receive was interrupted and can
* potentially be resumed.
*/
err = SET_ERROR(ZFS_ERR_STREAM_TRUNCATED);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_voff += len - done - resid;
done = len - resid;
if (err != 0)
return (err);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_bytes_read += len;
ASSERT3U(done, ==, len);
return (0);
}
static inline uint8_t
deduce_nblkptr(dmu_object_type_t bonus_type, uint64_t bonus_size)
{
if (bonus_type == DMU_OT_SA) {
return (1);
} else {
return (1 +
((DN_OLD_MAX_BONUSLEN -
MIN(DN_OLD_MAX_BONUSLEN, bonus_size)) >> SPA_BLKPTRSHIFT));
}
}
static void
save_resume_state(struct receive_writer_arg *rwa,
uint64_t object, uint64_t offset, dmu_tx_t *tx)
{
int txgoff = dmu_tx_get_txg(tx) & TXG_MASK;
if (!rwa->resumable)
return;
/*
* We use ds_resume_bytes[] != 0 to indicate that we need to
* update this on disk, so it must not be 0.
*/
ASSERT(rwa->bytes_read != 0);
/*
* We only resume from write records, which have a valid
* (non-meta-dnode) object number.
*/
ASSERT(object != 0);
/*
* For resuming to work correctly, we must receive records in order,
* sorted by object,offset. This is checked by the callers, but
* assert it here for good measure.
*/
ASSERT3U(object, >=, rwa->os->os_dsl_dataset->ds_resume_object[txgoff]);
ASSERT(object != rwa->os->os_dsl_dataset->ds_resume_object[txgoff] ||
offset >= rwa->os->os_dsl_dataset->ds_resume_offset[txgoff]);
ASSERT3U(rwa->bytes_read, >=,
rwa->os->os_dsl_dataset->ds_resume_bytes[txgoff]);
rwa->os->os_dsl_dataset->ds_resume_object[txgoff] = object;
rwa->os->os_dsl_dataset->ds_resume_offset[txgoff] = offset;
rwa->os->os_dsl_dataset->ds_resume_bytes[txgoff] = rwa->bytes_read;
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
static int
receive_object_is_same_generation(objset_t *os, uint64_t object,
dmu_object_type_t old_bonus_type, dmu_object_type_t new_bonus_type,
const void *new_bonus, boolean_t *samegenp)
{
zfs_file_info_t zoi;
int err;
dmu_buf_t *old_bonus_dbuf;
err = dmu_bonus_hold(os, object, FTAG, &old_bonus_dbuf);
if (err != 0)
return (err);
err = dmu_get_file_info(os, old_bonus_type, old_bonus_dbuf->db_data,
&zoi);
dmu_buf_rele(old_bonus_dbuf, FTAG);
if (err != 0)
return (err);
uint64_t old_gen = zoi.zfi_generation;
err = dmu_get_file_info(os, new_bonus_type, new_bonus, &zoi);
if (err != 0)
return (err);
uint64_t new_gen = zoi.zfi_generation;
*samegenp = (old_gen == new_gen);
return (0);
}
static int
receive_handle_existing_object(const struct receive_writer_arg *rwa,
const struct drr_object *drro, const dmu_object_info_t *doi,
const void *bonus_data,
uint64_t *object_to_hold, uint32_t *new_blksz)
{
uint32_t indblksz = drro->drr_indblkshift ?
1ULL << drro->drr_indblkshift : 0;
int nblkptr = deduce_nblkptr(drro->drr_bonustype,
drro->drr_bonuslen);
uint8_t dn_slots = drro->drr_dn_slots != 0 ?
drro->drr_dn_slots : DNODE_MIN_SLOTS;
boolean_t do_free_range = B_FALSE;
int err;
*object_to_hold = drro->drr_object;
/* nblkptr should be bounded by the bonus size and type */
if (rwa->raw && nblkptr != drro->drr_nblkptr)
return (SET_ERROR(EINVAL));
/*
* After the previous send stream, the sending system may
* have freed this object, and then happened to re-allocate
* this object number in a later txg. In this case, we are
* receiving a different logical file, and the block size may
* appear to be different. i.e. we may have a different
* block size for this object than what the send stream says.
* In this case we need to remove the object's contents,
* so that its structure can be changed and then its contents
* entirely replaced by subsequent WRITE records.
*
* If this is a -L (--large-block) incremental stream, and
* the previous stream was not -L, the block size may appear
* to increase. i.e. we may have a smaller block size for
* this object than what the send stream says. In this case
* we need to keep the object's contents and block size
* intact, so that we don't lose parts of the object's
* contents that are not changed by this incremental send
* stream.
*
* We can distinguish between the two above cases by using
* the ZPL's generation number (see
* receive_object_is_same_generation()). However, we only
* want to rely on the generation number when absolutely
* necessary, because with raw receives, the generation is
* encrypted. We also want to minimize dependence on the
* ZPL, so that other types of datasets can also be received
* (e.g. ZVOLs, although note that ZVOLS currently do not
* reallocate their objects or change their structure).
* Therefore, we check a number of different cases where we
* know it is safe to discard the object's contents, before
* using the ZPL's generation number to make the above
* distinction.
*/
if (drro->drr_blksz != doi->doi_data_block_size) {
if (rwa->raw) {
/*
* RAW streams always have large blocks, so
* we are sure that the data is not needed
* due to changing --large-block to be on.
* Which is fortunate since the bonus buffer
* (which contains the ZPL generation) is
* encrypted, and the key might not be
* loaded.
*/
do_free_range = B_TRUE;
} else if (rwa->full) {
/*
* This is a full send stream, so it always
* replaces what we have. Even if the
* generation numbers happen to match, this
* can not actually be the same logical file.
* This is relevant when receiving a full
* send as a clone.
*/
do_free_range = B_TRUE;
} else if (drro->drr_type !=
DMU_OT_PLAIN_FILE_CONTENTS ||
doi->doi_type != DMU_OT_PLAIN_FILE_CONTENTS) {
/*
* PLAIN_FILE_CONTENTS are the only type of
* objects that have ever been stored with
* large blocks, so we don't need the special
* logic below. ZAP blocks can shrink (when
* there's only one block), so we don't want
* to hit the error below about block size
* only increasing.
*/
do_free_range = B_TRUE;
} else if (doi->doi_max_offset <=
doi->doi_data_block_size) {
/*
* There is only one block. We can free it,
* because its contents will be replaced by a
* WRITE record. This can not be the no-L ->
* -L case, because the no-L case would have
* resulted in multiple blocks. If we
* supported -L -> no-L, it would not be safe
* to free the file's contents. Fortunately,
* that is not allowed (see
* recv_check_large_blocks()).
*/
do_free_range = B_TRUE;
} else {
boolean_t is_same_gen;
err = receive_object_is_same_generation(rwa->os,
drro->drr_object, doi->doi_bonus_type,
drro->drr_bonustype, bonus_data, &is_same_gen);
if (err != 0)
return (SET_ERROR(EINVAL));
if (is_same_gen) {
/*
* This is the same logical file, and
* the block size must be increasing.
* It could only decrease if
* --large-block was changed to be
* off, which is checked in
* recv_check_large_blocks().
*/
if (drro->drr_blksz <=
doi->doi_data_block_size)
return (SET_ERROR(EINVAL));
/*
* We keep the existing blocksize and
* contents.
*/
*new_blksz =
doi->doi_data_block_size;
} else {
do_free_range = B_TRUE;
}
}
}
/* nblkptr can only decrease if the object was reallocated */
if (nblkptr < doi->doi_nblkptr)
do_free_range = B_TRUE;
/* number of slots can only change on reallocation */
if (dn_slots != doi->doi_dnodesize >> DNODE_SHIFT)
do_free_range = B_TRUE;
/*
* For raw sends we also check a few other fields to
* ensure we are preserving the objset structure exactly
* as it was on the receive side:
* - A changed indirect block size
* - A smaller nlevels
*/
if (rwa->raw) {
if (indblksz != doi->doi_metadata_block_size)
do_free_range = B_TRUE;
if (drro->drr_nlevels < doi->doi_indirection)
do_free_range = B_TRUE;
}
if (do_free_range) {
err = dmu_free_long_range(rwa->os, drro->drr_object,
0, DMU_OBJECT_END);
if (err != 0)
return (SET_ERROR(EINVAL));
}
/*
* The dmu does not currently support decreasing nlevels
* or changing the number of dnode slots on an object. For
* non-raw sends, this does not matter and the new object
* can just use the previous one's nlevels. For raw sends,
* however, the structure of the received dnode (including
* nlevels and dnode slots) must match that of the send
* side. Therefore, instead of using dmu_object_reclaim(),
* we must free the object completely and call
* dmu_object_claim_dnsize() instead.
*/
if ((rwa->raw && drro->drr_nlevels < doi->doi_indirection) ||
dn_slots != doi->doi_dnodesize >> DNODE_SHIFT) {
err = dmu_free_long_object(rwa->os, drro->drr_object);
if (err != 0)
return (SET_ERROR(EINVAL));
txg_wait_synced(dmu_objset_pool(rwa->os), 0);
*object_to_hold = DMU_NEW_OBJECT;
}
/*
* For raw receives, free everything beyond the new incoming
* maxblkid. Normally this would be done with a DRR_FREE
* record that would come after this DRR_OBJECT record is
* processed. However, for raw receives we manually set the
* maxblkid from the drr_maxblkid and so we must first free
* everything above that blkid to ensure the DMU is always
* consistent with itself. We will never free the first block
* of the object here because a maxblkid of 0 could indicate
* an object with a single block or one with no blocks. This
* free may be skipped when dmu_free_long_range() was called
* above since it covers the entire object's contents.
*/
if (rwa->raw && *object_to_hold != DMU_NEW_OBJECT && !do_free_range) {
err = dmu_free_long_range(rwa->os, drro->drr_object,
(drro->drr_maxblkid + 1) * doi->doi_data_block_size,
DMU_OBJECT_END);
if (err != 0)
return (SET_ERROR(EINVAL));
}
return (0);
}
noinline static int
receive_object(struct receive_writer_arg *rwa, struct drr_object *drro,
void *data)
{
dmu_object_info_t doi;
dmu_tx_t *tx;
int err;
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
uint32_t new_blksz = drro->drr_blksz;
uint8_t dn_slots = drro->drr_dn_slots != 0 ?
drro->drr_dn_slots : DNODE_MIN_SLOTS;
if (drro->drr_type == DMU_OT_NONE ||
!DMU_OT_IS_VALID(drro->drr_type) ||
!DMU_OT_IS_VALID(drro->drr_bonustype) ||
drro->drr_checksumtype >= ZIO_CHECKSUM_FUNCTIONS ||
drro->drr_compress >= ZIO_COMPRESS_FUNCTIONS ||
P2PHASE(drro->drr_blksz, SPA_MINBLOCKSIZE) ||
drro->drr_blksz < SPA_MINBLOCKSIZE ||
drro->drr_blksz > spa_maxblocksize(dmu_objset_spa(rwa->os)) ||
drro->drr_bonuslen >
DN_BONUS_SIZE(spa_maxdnodesize(dmu_objset_spa(rwa->os))) ||
dn_slots >
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(spa_maxdnodesize(dmu_objset_spa(rwa->os)) >> DNODE_SHIFT)) {
return (SET_ERROR(EINVAL));
}
if (rwa->raw) {
/*
* We should have received a DRR_OBJECT_RANGE record
* containing this block and stored it in rwa.
*/
if (drro->drr_object < rwa->or_firstobj ||
drro->drr_object >= rwa->or_firstobj + rwa->or_numslots ||
drro->drr_raw_bonuslen < drro->drr_bonuslen ||
drro->drr_indblkshift > SPA_MAXBLOCKSHIFT ||
drro->drr_nlevels > DN_MAX_LEVELS ||
drro->drr_nblkptr > DN_MAX_NBLKPTR ||
DN_SLOTS_TO_BONUSLEN(dn_slots) <
drro->drr_raw_bonuslen)
return (SET_ERROR(EINVAL));
} else {
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/*
* The DRR_OBJECT_SPILL flag is valid when the DRR_BEGIN
* record indicates this by setting DRR_FLAG_SPILL_BLOCK.
*/
if (((drro->drr_flags & ~(DRR_OBJECT_SPILL))) ||
(!rwa->spill && DRR_OBJECT_HAS_SPILL(drro->drr_flags))) {
return (SET_ERROR(EINVAL));
}
if (drro->drr_raw_bonuslen != 0 || drro->drr_nblkptr != 0 ||
drro->drr_indblkshift != 0 || drro->drr_nlevels != 0) {
return (SET_ERROR(EINVAL));
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
}
}
err = dmu_object_info(rwa->os, drro->drr_object, &doi);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (err != 0 && err != ENOENT && err != EEXIST)
return (SET_ERROR(EINVAL));
if (drro->drr_object > rwa->max_object)
rwa->max_object = drro->drr_object;
/*
* If we are losing blkptrs or changing the block size this must
* be a new file instance. We must clear out the previous file
* contents before we can change this type of metadata in the dnode.
* Raw receives will also check that the indirect structure of the
* dnode hasn't changed.
*/
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
uint64_t object_to_hold;
if (err == 0) {
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
err = receive_handle_existing_object(rwa, drro, &doi, data,
&object_to_hold, &new_blksz);
} else if (err == EEXIST) {
/*
* The object requested is currently an interior slot of a
* multi-slot dnode. This will be resolved when the next txg
* is synced out, since the send stream will have told us
* to free this slot when we freed the associated dnode
* earlier in the stream.
*/
txg_wait_synced(dmu_objset_pool(rwa->os), 0);
if (dmu_object_info(rwa->os, drro->drr_object, NULL) != ENOENT)
return (SET_ERROR(EINVAL));
/* object was freed and we are about to allocate a new one */
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
object_to_hold = DMU_NEW_OBJECT;
} else {
/* object is free and we are about to allocate a new one */
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
object_to_hold = DMU_NEW_OBJECT;
}
/*
* If this is a multi-slot dnode there is a chance that this
* object will expand into a slot that is already used by
* another object from the previous snapshot. We must free
* these objects before we attempt to allocate the new dnode.
*/
if (dn_slots > 1) {
boolean_t need_sync = B_FALSE;
for (uint64_t slot = drro->drr_object + 1;
slot < drro->drr_object + dn_slots;
slot++) {
dmu_object_info_t slot_doi;
err = dmu_object_info(rwa->os, slot, &slot_doi);
if (err == ENOENT || err == EEXIST)
continue;
else if (err != 0)
return (err);
err = dmu_free_long_object(rwa->os, slot);
if (err != 0)
return (err);
need_sync = B_TRUE;
}
if (need_sync)
txg_wait_synced(dmu_objset_pool(rwa->os), 0);
}
tx = dmu_tx_create(rwa->os);
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
dmu_tx_hold_bonus(tx, object_to_hold);
dmu_tx_hold_write(tx, object_to_hold, 0, 0);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
return (err);
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
if (object_to_hold == DMU_NEW_OBJECT) {
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/* Currently free, wants to be allocated */
err = dmu_object_claim_dnsize(rwa->os, drro->drr_object,
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
drro->drr_type, new_blksz,
drro->drr_bonustype, drro->drr_bonuslen,
dn_slots << DNODE_SHIFT, tx);
} else if (drro->drr_type != doi.doi_type ||
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
new_blksz != doi.doi_data_block_size ||
drro->drr_bonustype != doi.doi_bonus_type ||
drro->drr_bonuslen != doi.doi_bonus_size) {
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/* Currently allocated, but with different properties */
err = dmu_object_reclaim_dnsize(rwa->os, drro->drr_object,
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
drro->drr_type, new_blksz,
drro->drr_bonustype, drro->drr_bonuslen,
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
dn_slots << DNODE_SHIFT, rwa->spill ?
DRR_OBJECT_HAS_SPILL(drro->drr_flags) : B_FALSE, tx);
} else if (rwa->spill && !DRR_OBJECT_HAS_SPILL(drro->drr_flags)) {
/*
* Currently allocated, the existing version of this object
* may reference a spill block that is no longer allocated
* at the source and needs to be freed.
*/
err = dmu_object_rm_spill(rwa->os, drro->drr_object, tx);
}
if (err != 0) {
dmu_tx_commit(tx);
return (SET_ERROR(EINVAL));
}
if (rwa->or_crypt_params_present) {
/*
* Set the crypt params for the buffer associated with this
* range of dnodes. This causes the blkptr_t to have the
* same crypt params (byteorder, salt, iv, mac) as on the
* sending side.
*
* Since we are committing this tx now, it is possible for
* the dnode block to end up on-disk with the incorrect MAC,
* if subsequent objects in this block are received in a
* different txg. However, since the dataset is marked as
* inconsistent, no code paths will do a non-raw read (or
* decrypt the block / verify the MAC). The receive code and
* scrub code can safely do raw reads and verify the
* checksum. They don't need to verify the MAC.
*/
dmu_buf_t *db = NULL;
uint64_t offset = rwa->or_firstobj * DNODE_MIN_SIZE;
err = dmu_buf_hold_by_dnode(DMU_META_DNODE(rwa->os),
offset, FTAG, &db, DMU_READ_PREFETCH | DMU_READ_NO_DECRYPT);
if (err != 0) {
dmu_tx_commit(tx);
return (SET_ERROR(EINVAL));
}
dmu_buf_set_crypt_params(db, rwa->or_byteorder,
rwa->or_salt, rwa->or_iv, rwa->or_mac, tx);
dmu_buf_rele(db, FTAG);
rwa->or_crypt_params_present = B_FALSE;
}
dmu_object_set_checksum(rwa->os, drro->drr_object,
drro->drr_checksumtype, tx);
dmu_object_set_compress(rwa->os, drro->drr_object,
drro->drr_compress, tx);
/* handle more restrictive dnode structuring for raw recvs */
if (rwa->raw) {
/*
* Set the indirect block size, block shift, nlevels.
* This will not fail because we ensured all of the
* blocks were freed earlier if this is a new object.
* For non-new objects block size and indirect block
* shift cannot change and nlevels can only increase.
*/
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
ASSERT3U(new_blksz, ==, drro->drr_blksz);
VERIFY0(dmu_object_set_blocksize(rwa->os, drro->drr_object,
drro->drr_blksz, drro->drr_indblkshift, tx));
VERIFY0(dmu_object_set_nlevels(rwa->os, drro->drr_object,
drro->drr_nlevels, tx));
/*
* Set the maxblkid. This will always succeed because
* we freed all blocks beyond the new maxblkid above.
*/
VERIFY0(dmu_object_set_maxblkid(rwa->os, drro->drr_object,
drro->drr_maxblkid, tx));
}
if (data != NULL) {
dmu_buf_t *db;
dnode_t *dn;
uint32_t flags = DMU_READ_NO_PREFETCH;
if (rwa->raw)
flags |= DMU_READ_NO_DECRYPT;
VERIFY0(dnode_hold(rwa->os, drro->drr_object, FTAG, &dn));
VERIFY0(dmu_bonus_hold_by_dnode(dn, FTAG, &db, flags));
dmu_buf_will_dirty(db, tx);
ASSERT3U(db->db_size, >=, drro->drr_bonuslen);
bcopy(data, db->db_data, DRR_OBJECT_PAYLOAD_SIZE(drro));
/*
* Raw bonus buffers have their byteorder determined by the
* DRR_OBJECT_RANGE record.
*/
if (rwa->byteswap && !rwa->raw) {
dmu_object_byteswap_t byteswap =
DMU_OT_BYTESWAP(drro->drr_bonustype);
dmu_ot_byteswap[byteswap].ob_func(db->db_data,
DRR_OBJECT_PAYLOAD_SIZE(drro));
}
dmu_buf_rele(db, FTAG);
dnode_rele(dn, FTAG);
}
dmu_tx_commit(tx);
return (0);
}
/* ARGSUSED */
noinline static int
receive_freeobjects(struct receive_writer_arg *rwa,
struct drr_freeobjects *drrfo)
{
uint64_t obj;
int next_err = 0;
if (drrfo->drr_firstobj + drrfo->drr_numobjs < drrfo->drr_firstobj)
return (SET_ERROR(EINVAL));
for (obj = drrfo->drr_firstobj == 0 ? 1 : drrfo->drr_firstobj;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
obj < drrfo->drr_firstobj + drrfo->drr_numobjs &&
obj < DN_MAX_OBJECT && next_err == 0;
next_err = dmu_object_next(rwa->os, &obj, FALSE, 0)) {
dmu_object_info_t doi;
int err;
err = dmu_object_info(rwa->os, obj, &doi);
if (err == ENOENT)
continue;
else if (err != 0)
return (err);
err = dmu_free_long_object(rwa->os, obj);
if (err != 0)
return (err);
}
if (next_err != ESRCH)
return (next_err);
return (0);
}
/*
* Note: if this fails, the caller will clean up any records left on the
* rwa->write_batch list.
*/
static int
flush_write_batch_impl(struct receive_writer_arg *rwa)
{
dnode_t *dn;
int err;
if (dnode_hold(rwa->os, rwa->last_object, FTAG, &dn) != 0)
return (SET_ERROR(EINVAL));
struct receive_record_arg *last_rrd = list_tail(&rwa->write_batch);
struct drr_write *last_drrw = &last_rrd->header.drr_u.drr_write;
struct receive_record_arg *first_rrd = list_head(&rwa->write_batch);
struct drr_write *first_drrw = &first_rrd->header.drr_u.drr_write;
ASSERT3U(rwa->last_object, ==, last_drrw->drr_object);
ASSERT3U(rwa->last_offset, ==, last_drrw->drr_offset);
dmu_tx_t *tx = dmu_tx_create(rwa->os);
dmu_tx_hold_write_by_dnode(tx, dn, first_drrw->drr_offset,
last_drrw->drr_offset - first_drrw->drr_offset +
last_drrw->drr_logical_size);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
dnode_rele(dn, FTAG);
return (err);
}
struct receive_record_arg *rrd;
while ((rrd = list_head(&rwa->write_batch)) != NULL) {
struct drr_write *drrw = &rrd->header.drr_u.drr_write;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_t *abd = rrd->abd;
ASSERT3U(drrw->drr_object, ==, rwa->last_object);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
if (drrw->drr_logical_size != dn->dn_datablksz) {
/*
* The WRITE record is larger than the object's block
* size. We must be receiving an incremental
* large-block stream into a dataset that previously did
* a non-large-block receive. Lightweight writes must
* be exactly one block, so we need to decompress the
* data (if compressed) and do a normal dmu_write().
*/
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
ASSERT3U(drrw->drr_logical_size, >, dn->dn_datablksz);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
if (DRR_WRITE_COMPRESSED(drrw)) {
abd_t *decomp_abd =
abd_alloc_linear(drrw->drr_logical_size,
B_FALSE);
err = zio_decompress_data(
drrw->drr_compressiontype,
abd, abd_to_buf(decomp_abd),
abd_get_size(abd),
abd_get_size(decomp_abd), NULL);
if (err == 0) {
dmu_write_by_dnode(dn,
drrw->drr_offset,
drrw->drr_logical_size,
abd_to_buf(decomp_abd), tx);
}
abd_free(decomp_abd);
} else {
dmu_write_by_dnode(dn,
drrw->drr_offset,
drrw->drr_logical_size,
abd_to_buf(abd), tx);
}
if (err == 0)
abd_free(abd);
} else {
zio_prop_t zp;
dmu_write_policy(rwa->os, dn, 0, 0, &zp);
enum zio_flag zio_flags = 0;
if (rwa->raw) {
zp.zp_encrypt = B_TRUE;
zp.zp_compress = drrw->drr_compressiontype;
zp.zp_byteorder = ZFS_HOST_BYTEORDER ^
!!DRR_IS_RAW_BYTESWAPPED(drrw->drr_flags) ^
rwa->byteswap;
bcopy(drrw->drr_salt, zp.zp_salt,
ZIO_DATA_SALT_LEN);
bcopy(drrw->drr_iv, zp.zp_iv,
ZIO_DATA_IV_LEN);
bcopy(drrw->drr_mac, zp.zp_mac,
ZIO_DATA_MAC_LEN);
if (DMU_OT_IS_ENCRYPTED(zp.zp_type)) {
zp.zp_nopwrite = B_FALSE;
zp.zp_copies = MIN(zp.zp_copies,
SPA_DVAS_PER_BP - 1);
}
zio_flags |= ZIO_FLAG_RAW;
} else if (DRR_WRITE_COMPRESSED(drrw)) {
ASSERT3U(drrw->drr_compressed_size, >, 0);
ASSERT3U(drrw->drr_logical_size, >=,
drrw->drr_compressed_size);
zp.zp_compress = drrw->drr_compressiontype;
zio_flags |= ZIO_FLAG_RAW_COMPRESS;
} else if (rwa->byteswap) {
/*
* Note: compressed blocks never need to be
* byteswapped, because WRITE records for
* metadata blocks are never compressed. The
* exception is raw streams, which are written
* in the original byteorder, and the byteorder
* bit is preserved in the BP by setting
* zp_byteorder above.
*/
dmu_object_byteswap_t byteswap =
DMU_OT_BYTESWAP(drrw->drr_type);
dmu_ot_byteswap[byteswap].ob_func(
abd_to_buf(abd),
DRR_WRITE_PAYLOAD_SIZE(drrw));
}
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
/*
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
* Since this data can't be read until the receive
* completes, we can do a "lightweight" write for
* improved performance.
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
*/
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
err = dmu_lightweight_write_by_dnode(dn,
drrw->drr_offset, abd, &zp, zio_flags, tx);
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
}
if (err != 0) {
/*
* This rrd is left on the list, so the caller will
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
* free it (and the abd).
*/
break;
}
/*
* Note: If the receive fails, we want the resume stream to
* start with the same record that we last successfully
* received (as opposed to the next record), so that we can
* verify that we are resuming from the correct location.
*/
save_resume_state(rwa, drrw->drr_object, drrw->drr_offset, tx);
list_remove(&rwa->write_batch, rrd);
kmem_free(rrd, sizeof (*rrd));
}
dmu_tx_commit(tx);
dnode_rele(dn, FTAG);
return (err);
}
noinline static int
flush_write_batch(struct receive_writer_arg *rwa)
{
if (list_is_empty(&rwa->write_batch))
return (0);
int err = rwa->err;
if (err == 0)
err = flush_write_batch_impl(rwa);
if (err != 0) {
struct receive_record_arg *rrd;
while ((rrd = list_remove_head(&rwa->write_batch)) != NULL) {
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(rrd->abd);
kmem_free(rrd, sizeof (*rrd));
}
}
ASSERT(list_is_empty(&rwa->write_batch));
return (err);
}
noinline static int
receive_process_write_record(struct receive_writer_arg *rwa,
struct receive_record_arg *rrd)
{
int err = 0;
ASSERT3U(rrd->header.drr_type, ==, DRR_WRITE);
struct drr_write *drrw = &rrd->header.drr_u.drr_write;
if (drrw->drr_offset + drrw->drr_logical_size < drrw->drr_offset ||
!DMU_OT_IS_VALID(drrw->drr_type))
return (SET_ERROR(EINVAL));
/*
* For resuming to work, records must be in increasing order
* by (object, offset).
*/
if (drrw->drr_object < rwa->last_object ||
(drrw->drr_object == rwa->last_object &&
drrw->drr_offset < rwa->last_offset)) {
return (SET_ERROR(EINVAL));
}
struct receive_record_arg *first_rrd = list_head(&rwa->write_batch);
struct drr_write *first_drrw = &first_rrd->header.drr_u.drr_write;
uint64_t batch_size =
MIN(zfs_recv_write_batch_size, DMU_MAX_ACCESS / 2);
if (first_rrd != NULL &&
(drrw->drr_object != first_drrw->drr_object ||
drrw->drr_offset >= first_drrw->drr_offset + batch_size)) {
err = flush_write_batch(rwa);
if (err != 0)
return (err);
}
rwa->last_object = drrw->drr_object;
rwa->last_offset = drrw->drr_offset;
if (rwa->last_object > rwa->max_object)
rwa->max_object = rwa->last_object;
list_insert_tail(&rwa->write_batch, rrd);
/*
* Return EAGAIN to indicate that we will use this rrd again,
* so the caller should not free it
*/
return (EAGAIN);
}
static int
receive_write_embedded(struct receive_writer_arg *rwa,
struct drr_write_embedded *drrwe, void *data)
{
dmu_tx_t *tx;
int err;
if (drrwe->drr_offset + drrwe->drr_length < drrwe->drr_offset)
return (SET_ERROR(EINVAL));
if (drrwe->drr_psize > BPE_PAYLOAD_SIZE)
return (SET_ERROR(EINVAL));
if (drrwe->drr_etype >= NUM_BP_EMBEDDED_TYPES)
return (SET_ERROR(EINVAL));
if (drrwe->drr_compression >= ZIO_COMPRESS_FUNCTIONS)
return (SET_ERROR(EINVAL));
if (rwa->raw)
return (SET_ERROR(EINVAL));
if (drrwe->drr_object > rwa->max_object)
rwa->max_object = drrwe->drr_object;
tx = dmu_tx_create(rwa->os);
dmu_tx_hold_write(tx, drrwe->drr_object,
drrwe->drr_offset, drrwe->drr_length);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
return (err);
}
dmu_write_embedded(rwa->os, drrwe->drr_object,
drrwe->drr_offset, data, drrwe->drr_etype,
drrwe->drr_compression, drrwe->drr_lsize, drrwe->drr_psize,
rwa->byteswap ^ ZFS_HOST_BYTEORDER, tx);
/* See comment in restore_write. */
save_resume_state(rwa, drrwe->drr_object, drrwe->drr_offset, tx);
dmu_tx_commit(tx);
return (0);
}
static int
receive_spill(struct receive_writer_arg *rwa, struct drr_spill *drrs,
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_t *abd)
{
dmu_buf_t *db, *db_spill;
int err;
if (drrs->drr_length < SPA_MINBLOCKSIZE ||
drrs->drr_length > spa_maxblocksize(dmu_objset_spa(rwa->os)))
return (SET_ERROR(EINVAL));
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/*
* This is an unmodified spill block which was added to the stream
* to resolve an issue with incorrectly removing spill blocks. It
* should be ignored by current versions of the code which support
* the DRR_FLAG_SPILL_BLOCK flag.
*/
if (rwa->spill && DRR_SPILL_IS_UNMODIFIED(drrs->drr_flags)) {
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(abd);
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
return (0);
}
if (rwa->raw) {
if (!DMU_OT_IS_VALID(drrs->drr_type) ||
drrs->drr_compressiontype >= ZIO_COMPRESS_FUNCTIONS ||
drrs->drr_compressed_size == 0)
return (SET_ERROR(EINVAL));
}
if (dmu_object_info(rwa->os, drrs->drr_object, NULL) != 0)
return (SET_ERROR(EINVAL));
if (drrs->drr_object > rwa->max_object)
rwa->max_object = drrs->drr_object;
VERIFY0(dmu_bonus_hold(rwa->os, drrs->drr_object, FTAG, &db));
if ((err = dmu_spill_hold_by_bonus(db, DMU_READ_NO_DECRYPT, FTAG,
&db_spill)) != 0) {
dmu_buf_rele(db, FTAG);
return (err);
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dmu_tx_t *tx = dmu_tx_create(rwa->os);
dmu_tx_hold_spill(tx, db->db_object);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_buf_rele(db, FTAG);
dmu_buf_rele(db_spill, FTAG);
dmu_tx_abort(tx);
return (err);
}
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
/*
* Spill blocks may both grow and shrink. When a change in size
* occurs any existing dbuf must be updated to match the logical
* size of the provided arc_buf_t.
*/
if (db_spill->db_size != drrs->drr_length) {
dmu_buf_will_fill(db_spill, tx);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
VERIFY0(dbuf_spill_set_blksz(db_spill,
drrs->drr_length, tx));
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
arc_buf_t *abuf;
if (rwa->raw) {
boolean_t byteorder = ZFS_HOST_BYTEORDER ^
!!DRR_IS_RAW_BYTESWAPPED(drrs->drr_flags) ^
rwa->byteswap;
abuf = arc_loan_raw_buf(dmu_objset_spa(rwa->os),
drrs->drr_object, byteorder, drrs->drr_salt,
drrs->drr_iv, drrs->drr_mac, drrs->drr_type,
drrs->drr_compressed_size, drrs->drr_length,
drrs->drr_compressiontype, 0);
} else {
abuf = arc_loan_buf(dmu_objset_spa(rwa->os),
DMU_OT_IS_METADATA(drrs->drr_type),
drrs->drr_length);
if (rwa->byteswap) {
dmu_object_byteswap_t byteswap =
DMU_OT_BYTESWAP(drrs->drr_type);
dmu_ot_byteswap[byteswap].ob_func(abd_to_buf(abd),
DRR_SPILL_PAYLOAD_SIZE(drrs));
}
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
bcopy(abd_to_buf(abd), abuf->b_data, DRR_SPILL_PAYLOAD_SIZE(drrs));
abd_free(abd);
dbuf_assign_arcbuf((dmu_buf_impl_t *)db_spill, abuf, tx);
dmu_buf_rele(db, FTAG);
dmu_buf_rele(db_spill, FTAG);
dmu_tx_commit(tx);
return (0);
}
/* ARGSUSED */
noinline static int
receive_free(struct receive_writer_arg *rwa, struct drr_free *drrf)
{
int err;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drrf->drr_length != -1ULL &&
drrf->drr_offset + drrf->drr_length < drrf->drr_offset)
return (SET_ERROR(EINVAL));
if (dmu_object_info(rwa->os, drrf->drr_object, NULL) != 0)
return (SET_ERROR(EINVAL));
if (drrf->drr_object > rwa->max_object)
rwa->max_object = drrf->drr_object;
err = dmu_free_long_range(rwa->os, drrf->drr_object,
drrf->drr_offset, drrf->drr_length);
return (err);
}
static int
receive_object_range(struct receive_writer_arg *rwa,
struct drr_object_range *drror)
{
/*
* By default, we assume this block is in our native format
* (ZFS_HOST_BYTEORDER). We then take into account whether
* the send stream is byteswapped (rwa->byteswap). Finally,
* we need to byteswap again if this particular block was
* in non-native format on the send side.
*/
boolean_t byteorder = ZFS_HOST_BYTEORDER ^ rwa->byteswap ^
!!DRR_IS_RAW_BYTESWAPPED(drror->drr_flags);
/*
* Since dnode block sizes are constant, we should not need to worry
* about making sure that the dnode block size is the same on the
* sending and receiving sides for the time being. For non-raw sends,
* this does not matter (and in fact we do not send a DRR_OBJECT_RANGE
* record at all). Raw sends require this record type because the
* encryption parameters are used to protect an entire block of bonus
* buffers. If the size of dnode blocks ever becomes variable,
* handling will need to be added to ensure that dnode block sizes
* match on the sending and receiving side.
*/
if (drror->drr_numslots != DNODES_PER_BLOCK ||
P2PHASE(drror->drr_firstobj, DNODES_PER_BLOCK) != 0 ||
!rwa->raw)
return (SET_ERROR(EINVAL));
if (drror->drr_firstobj > rwa->max_object)
rwa->max_object = drror->drr_firstobj;
/*
* The DRR_OBJECT_RANGE handling must be deferred to receive_object()
* so that the block of dnodes is not written out when it's empty,
* and converted to a HOLE BP.
*/
rwa->or_crypt_params_present = B_TRUE;
rwa->or_firstobj = drror->drr_firstobj;
rwa->or_numslots = drror->drr_numslots;
bcopy(drror->drr_salt, rwa->or_salt, ZIO_DATA_SALT_LEN);
bcopy(drror->drr_iv, rwa->or_iv, ZIO_DATA_IV_LEN);
bcopy(drror->drr_mac, rwa->or_mac, ZIO_DATA_MAC_LEN);
rwa->or_byteorder = byteorder;
return (0);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* Until we have the ability to redact large ranges of data efficiently, we
* process these records as frees.
*/
/* ARGSUSED */
noinline static int
receive_redact(struct receive_writer_arg *rwa, struct drr_redact *drrr)
{
struct drr_free drrf = {0};
drrf.drr_length = drrr->drr_length;
drrf.drr_object = drrr->drr_object;
drrf.drr_offset = drrr->drr_offset;
drrf.drr_toguid = drrr->drr_toguid;
return (receive_free(rwa, &drrf));
}
/* used to destroy the drc_ds on error */
static void
dmu_recv_cleanup_ds(dmu_recv_cookie_t *drc)
{
dsl_dataset_t *ds = drc->drc_ds;
ds_hold_flags_t dsflags;
dsflags = (drc->drc_raw) ? DS_HOLD_FLAG_NONE : DS_HOLD_FLAG_DECRYPT;
/*
* Wait for the txg sync before cleaning up the receive. For
* resumable receives, this ensures that our resume state has
* been written out to disk. For raw receives, this ensures
* that the user accounting code will not attempt to do anything
* after we stopped receiving the dataset.
*/
txg_wait_synced(ds->ds_dir->dd_pool, 0);
ds->ds_objset->os_raw_receive = B_FALSE;
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
if (drc->drc_resumable && drc->drc_should_save &&
!BP_IS_HOLE(dsl_dataset_get_blkptr(ds))) {
rrw_exit(&ds->ds_bp_rwlock, FTAG);
dsl_dataset_disown(ds, dsflags, dmu_recv_tag);
} else {
char name[ZFS_MAX_DATASET_NAME_LEN];
rrw_exit(&ds->ds_bp_rwlock, FTAG);
dsl_dataset_name(ds, name);
dsl_dataset_disown(ds, dsflags, dmu_recv_tag);
(void) dsl_destroy_head(name);
}
}
static void
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_cksum(dmu_recv_cookie_t *drc, int len, void *buf)
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_byteswap) {
(void) fletcher_4_incremental_byteswap(buf, len,
&drc->drc_cksum);
} else {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) fletcher_4_incremental_native(buf, len, &drc->drc_cksum);
}
}
/*
* Read the payload into a buffer of size len, and update the current record's
* payload field.
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
* Allocate drc->drc_next_rrd and read the next record's header into
* drc->drc_next_rrd->header.
* Verify checksum of payload and next record.
*/
static int
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read_payload_and_next_header(dmu_recv_cookie_t *drc, int len, void *buf)
{
int err;
if (len != 0) {
ASSERT3U(len, <=, SPA_MAXBLOCKSIZE);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read(drc, len, buf);
if (err != 0)
return (err);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_cksum(drc, len, buf);
/* note: rrd is NULL when reading the begin record's payload */
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_rrd != NULL) {
drc->drc_rrd->payload = buf;
drc->drc_rrd->payload_size = len;
drc->drc_rrd->bytes_read = drc->drc_bytes_read;
}
} else {
ASSERT3P(buf, ==, NULL);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_prev_cksum = drc->drc_cksum;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_next_rrd = kmem_zalloc(sizeof (*drc->drc_next_rrd), KM_SLEEP);
err = receive_read(drc, sizeof (drc->drc_next_rrd->header),
&drc->drc_next_rrd->header);
drc->drc_next_rrd->bytes_read = drc->drc_bytes_read;
if (err != 0) {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
kmem_free(drc->drc_next_rrd, sizeof (*drc->drc_next_rrd));
drc->drc_next_rrd = NULL;
return (err);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_next_rrd->header.drr_type == DRR_BEGIN) {
kmem_free(drc->drc_next_rrd, sizeof (*drc->drc_next_rrd));
drc->drc_next_rrd = NULL;
return (SET_ERROR(EINVAL));
}
/*
* Note: checksum is of everything up to but not including the
* checksum itself.
*/
ASSERT3U(offsetof(dmu_replay_record_t, drr_u.drr_checksum.drr_checksum),
==, sizeof (dmu_replay_record_t) - sizeof (zio_cksum_t));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_cksum(drc,
offsetof(dmu_replay_record_t, drr_u.drr_checksum.drr_checksum),
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
&drc->drc_next_rrd->header);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
zio_cksum_t cksum_orig =
drc->drc_next_rrd->header.drr_u.drr_checksum.drr_checksum;
zio_cksum_t *cksump =
&drc->drc_next_rrd->header.drr_u.drr_checksum.drr_checksum;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_byteswap)
byteswap_record(&drc->drc_next_rrd->header);
if ((!ZIO_CHECKSUM_IS_ZERO(cksump)) &&
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
!ZIO_CHECKSUM_EQUAL(drc->drc_cksum, *cksump)) {
kmem_free(drc->drc_next_rrd, sizeof (*drc->drc_next_rrd));
drc->drc_next_rrd = NULL;
return (SET_ERROR(ECKSUM));
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_cksum(drc, sizeof (cksum_orig), &cksum_orig);
return (0);
}
/*
* Issue the prefetch reads for any necessary indirect blocks.
*
* We use the object ignore list to tell us whether or not to issue prefetches
* for a given object. We do this for both correctness (in case the blocksize
* of an object has changed) and performance (if the object doesn't exist, don't
* needlessly try to issue prefetches). We also trim the list as we go through
* the stream to prevent it from growing to an unbounded size.
*
* The object numbers within will always be in sorted order, and any write
* records we see will also be in sorted order, but they're not sorted with
* respect to each other (i.e. we can get several object records before
* receiving each object's write records). As a result, once we've reached a
* given object number, we can safely remove any reference to lower object
* numbers in the ignore list. In practice, we receive up to 32 object records
* before receiving write records, so the list can have up to 32 nodes in it.
*/
/* ARGSUSED */
static void
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read_prefetch(dmu_recv_cookie_t *drc, uint64_t object, uint64_t offset,
uint64_t length)
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (!objlist_exists(drc->drc_ignore_objlist, object)) {
dmu_prefetch(drc->drc_os, object, 1, offset, length,
ZIO_PRIORITY_SYNC_READ);
}
}
/*
* Read records off the stream, issuing any necessary prefetches.
*/
static int
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read_record(dmu_recv_cookie_t *drc)
{
int err;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
switch (drc->drc_rrd->header.drr_type) {
case DRR_OBJECT:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct drr_object *drro =
&drc->drc_rrd->header.drr_u.drr_object;
uint32_t size = DRR_OBJECT_PAYLOAD_SIZE(drro);
void *buf = NULL;
dmu_object_info_t doi;
if (size != 0)
buf = kmem_zalloc(size, KM_SLEEP);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read_payload_and_next_header(drc, size, buf);
if (err != 0) {
kmem_free(buf, size);
return (err);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = dmu_object_info(drc->drc_os, drro->drr_object, &doi);
/*
* See receive_read_prefetch for an explanation why we're
* storing this object in the ignore_obj_list.
*/
if (err == ENOENT || err == EEXIST ||
(err == 0 && doi.doi_data_block_size != drro->drr_blksz)) {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
objlist_insert(drc->drc_ignore_objlist,
drro->drr_object);
err = 0;
}
return (err);
}
case DRR_FREEOBJECTS:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read_payload_and_next_header(drc, 0, NULL);
return (err);
}
case DRR_WRITE:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct drr_write *drrw = &drc->drc_rrd->header.drr_u.drr_write;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
int size = DRR_WRITE_PAYLOAD_SIZE(drrw);
abd_t *abd = abd_alloc_linear(size, B_FALSE);
err = receive_read_payload_and_next_header(drc, size,
abd_to_buf(abd));
if (err != 0) {
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(abd);
return (err);
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
drc->drc_rrd->abd = abd;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read_prefetch(drc, drrw->drr_object, drrw->drr_offset,
drrw->drr_logical_size);
return (err);
}
case DRR_WRITE_EMBEDDED:
{
struct drr_write_embedded *drrwe =
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
&drc->drc_rrd->header.drr_u.drr_write_embedded;
uint32_t size = P2ROUNDUP(drrwe->drr_psize, 8);
void *buf = kmem_zalloc(size, KM_SLEEP);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read_payload_and_next_header(drc, size, buf);
if (err != 0) {
kmem_free(buf, size);
return (err);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
receive_read_prefetch(drc, drrwe->drr_object, drrwe->drr_offset,
drrwe->drr_length);
return (err);
}
case DRR_FREE:
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case DRR_REDACT:
{
/*
* It might be beneficial to prefetch indirect blocks here, but
* we don't really have the data to decide for sure.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read_payload_and_next_header(drc, 0, NULL);
return (err);
}
case DRR_END:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct drr_end *drre = &drc->drc_rrd->header.drr_u.drr_end;
if (!ZIO_CHECKSUM_EQUAL(drc->drc_prev_cksum,
drre->drr_checksum))
return (SET_ERROR(ECKSUM));
return (0);
}
case DRR_SPILL:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct drr_spill *drrs = &drc->drc_rrd->header.drr_u.drr_spill;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
int size = DRR_SPILL_PAYLOAD_SIZE(drrs);
abd_t *abd = abd_alloc_linear(size, B_FALSE);
err = receive_read_payload_and_next_header(drc, size,
abd_to_buf(abd));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (err != 0)
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(abd);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
else
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
drc->drc_rrd->abd = abd;
return (err);
}
case DRR_OBJECT_RANGE:
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = receive_read_payload_and_next_header(drc, 0, NULL);
return (err);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
}
default:
return (SET_ERROR(EINVAL));
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static void
dprintf_drr(struct receive_record_arg *rrd, int err)
{
#ifdef ZFS_DEBUG
switch (rrd->header.drr_type) {
case DRR_OBJECT:
{
struct drr_object *drro = &rrd->header.drr_u.drr_object;
dprintf("drr_type = OBJECT obj = %llu type = %u "
"bonustype = %u blksz = %u bonuslen = %u cksumtype = %u "
"compress = %u dn_slots = %u err = %d\n",
drro->drr_object, drro->drr_type, drro->drr_bonustype,
drro->drr_blksz, drro->drr_bonuslen,
drro->drr_checksumtype, drro->drr_compress,
drro->drr_dn_slots, err);
break;
}
case DRR_FREEOBJECTS:
{
struct drr_freeobjects *drrfo =
&rrd->header.drr_u.drr_freeobjects;
dprintf("drr_type = FREEOBJECTS firstobj = %llu "
"numobjs = %llu err = %d\n",
drrfo->drr_firstobj, drrfo->drr_numobjs, err);
break;
}
case DRR_WRITE:
{
struct drr_write *drrw = &rrd->header.drr_u.drr_write;
dprintf("drr_type = WRITE obj = %llu type = %u offset = %llu "
"lsize = %llu cksumtype = %u flags = %u "
"compress = %u psize = %llu err = %d\n",
drrw->drr_object, drrw->drr_type, drrw->drr_offset,
drrw->drr_logical_size, drrw->drr_checksumtype,
drrw->drr_flags, drrw->drr_compressiontype,
drrw->drr_compressed_size, err);
break;
}
case DRR_WRITE_BYREF:
{
struct drr_write_byref *drrwbr =
&rrd->header.drr_u.drr_write_byref;
dprintf("drr_type = WRITE_BYREF obj = %llu offset = %llu "
"length = %llu toguid = %llx refguid = %llx "
"refobject = %llu refoffset = %llu cksumtype = %u "
"flags = %u err = %d\n",
drrwbr->drr_object, drrwbr->drr_offset,
drrwbr->drr_length, drrwbr->drr_toguid,
drrwbr->drr_refguid, drrwbr->drr_refobject,
drrwbr->drr_refoffset, drrwbr->drr_checksumtype,
drrwbr->drr_flags, err);
break;
}
case DRR_WRITE_EMBEDDED:
{
struct drr_write_embedded *drrwe =
&rrd->header.drr_u.drr_write_embedded;
dprintf("drr_type = WRITE_EMBEDDED obj = %llu offset = %llu "
"length = %llu compress = %u etype = %u lsize = %u "
"psize = %u err = %d\n",
drrwe->drr_object, drrwe->drr_offset, drrwe->drr_length,
drrwe->drr_compression, drrwe->drr_etype,
drrwe->drr_lsize, drrwe->drr_psize, err);
break;
}
case DRR_FREE:
{
struct drr_free *drrf = &rrd->header.drr_u.drr_free;
dprintf("drr_type = FREE obj = %llu offset = %llu "
"length = %lld err = %d\n",
drrf->drr_object, drrf->drr_offset, drrf->drr_length,
err);
break;
}
case DRR_SPILL:
{
struct drr_spill *drrs = &rrd->header.drr_u.drr_spill;
dprintf("drr_type = SPILL obj = %llu length = %llu "
"err = %d\n", drrs->drr_object, drrs->drr_length, err);
break;
}
case DRR_OBJECT_RANGE:
{
struct drr_object_range *drror =
&rrd->header.drr_u.drr_object_range;
dprintf("drr_type = OBJECT_RANGE firstobj = %llu "
"numslots = %llu flags = %u err = %d\n",
drror->drr_firstobj, drror->drr_numslots,
drror->drr_flags, err);
break;
}
default:
return;
}
#endif
}
/*
* Commit the records to the pool.
*/
static int
receive_process_record(struct receive_writer_arg *rwa,
struct receive_record_arg *rrd)
{
int err;
/* Processing in order, therefore bytes_read should be increasing. */
ASSERT3U(rrd->bytes_read, >=, rwa->bytes_read);
rwa->bytes_read = rrd->bytes_read;
if (rrd->header.drr_type != DRR_WRITE) {
err = flush_write_batch(rwa);
if (err != 0) {
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
if (rrd->abd != NULL) {
abd_free(rrd->abd);
rrd->abd = NULL;
rrd->payload = NULL;
} else if (rrd->payload != NULL) {
kmem_free(rrd->payload, rrd->payload_size);
rrd->payload = NULL;
}
return (err);
}
}
switch (rrd->header.drr_type) {
case DRR_OBJECT:
{
struct drr_object *drro = &rrd->header.drr_u.drr_object;
err = receive_object(rwa, drro, rrd->payload);
kmem_free(rrd->payload, rrd->payload_size);
rrd->payload = NULL;
break;
}
case DRR_FREEOBJECTS:
{
struct drr_freeobjects *drrfo =
&rrd->header.drr_u.drr_freeobjects;
err = receive_freeobjects(rwa, drrfo);
break;
}
case DRR_WRITE:
{
err = receive_process_write_record(rwa, rrd);
if (err != EAGAIN) {
/*
* On success, receive_process_write_record() returns
* EAGAIN to indicate that we do not want to free
* the rrd or arc_buf.
*/
ASSERT(err != 0);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(rrd->abd);
rrd->abd = NULL;
}
break;
}
case DRR_WRITE_EMBEDDED:
{
struct drr_write_embedded *drrwe =
&rrd->header.drr_u.drr_write_embedded;
err = receive_write_embedded(rwa, drrwe, rrd->payload);
kmem_free(rrd->payload, rrd->payload_size);
rrd->payload = NULL;
break;
}
case DRR_FREE:
{
struct drr_free *drrf = &rrd->header.drr_u.drr_free;
err = receive_free(rwa, drrf);
break;
}
case DRR_SPILL:
{
struct drr_spill *drrs = &rrd->header.drr_u.drr_spill;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
err = receive_spill(rwa, drrs, rrd->abd);
if (err != 0)
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
abd_free(rrd->abd);
rrd->abd = NULL;
rrd->payload = NULL;
break;
}
case DRR_OBJECT_RANGE:
{
struct drr_object_range *drror =
&rrd->header.drr_u.drr_object_range;
err = receive_object_range(rwa, drror);
break;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case DRR_REDACT:
{
struct drr_redact *drrr = &rrd->header.drr_u.drr_redact;
err = receive_redact(rwa, drrr);
break;
}
default:
err = (SET_ERROR(EINVAL));
}
if (err != 0)
dprintf_drr(rrd, err);
return (err);
}
/*
* dmu_recv_stream's worker thread; pull records off the queue, and then call
* receive_process_record When we're done, signal the main thread and exit.
*/
static void
receive_writer_thread(void *arg)
{
struct receive_writer_arg *rwa = arg;
struct receive_record_arg *rrd;
fstrans_cookie_t cookie = spl_fstrans_mark();
for (rrd = bqueue_dequeue(&rwa->q); !rrd->eos_marker;
rrd = bqueue_dequeue(&rwa->q)) {
/*
* If there's an error, the main thread will stop putting things
* on the queue, but we need to clear everything in it before we
* can exit.
*/
int err = 0;
if (rwa->err == 0) {
err = receive_process_record(rwa, rrd);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
} else if (rrd->abd != NULL) {
abd_free(rrd->abd);
rrd->abd = NULL;
rrd->payload = NULL;
} else if (rrd->payload != NULL) {
kmem_free(rrd->payload, rrd->payload_size);
rrd->payload = NULL;
}
/*
* EAGAIN indicates that this record has been saved (on
* raw->write_batch), and will be used again, so we don't
* free it.
*/
if (err != EAGAIN) {
if (rwa->err == 0)
rwa->err = err;
kmem_free(rrd, sizeof (*rrd));
}
}
kmem_free(rrd, sizeof (*rrd));
int err = flush_write_batch(rwa);
if (rwa->err == 0)
rwa->err = err;
mutex_enter(&rwa->mutex);
rwa->done = B_TRUE;
cv_signal(&rwa->cv);
mutex_exit(&rwa->mutex);
spl_fstrans_unmark(cookie);
thread_exit();
}
static int
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
resume_check(dmu_recv_cookie_t *drc, nvlist_t *begin_nvl)
{
uint64_t val;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
objset_t *mos = dmu_objset_pool(drc->drc_os)->dp_meta_objset;
uint64_t dsobj = dmu_objset_id(drc->drc_os);
uint64_t resume_obj, resume_off;
if (nvlist_lookup_uint64(begin_nvl,
"resume_object", &resume_obj) != 0 ||
nvlist_lookup_uint64(begin_nvl,
"resume_offset", &resume_off) != 0) {
return (SET_ERROR(EINVAL));
}
VERIFY0(zap_lookup(mos, dsobj,
DS_FIELD_RESUME_OBJECT, sizeof (val), 1, &val));
if (resume_obj != val)
return (SET_ERROR(EINVAL));
VERIFY0(zap_lookup(mos, dsobj,
DS_FIELD_RESUME_OFFSET, sizeof (val), 1, &val));
if (resume_off != val)
return (SET_ERROR(EINVAL));
return (0);
}
/*
* Read in the stream's records, one by one, and apply them to the pool. There
* are two threads involved; the thread that calls this function will spin up a
* worker thread, read the records off the stream one by one, and issue
* prefetches for any necessary indirect blocks. It will then push the records
* onto an internal blocking queue. The worker thread will pull the records off
* the queue, and actually write the data into the DMU. This way, the worker
* thread doesn't have to wait for reads to complete, since everything it needs
* (the indirect blocks) will be prefetched.
*
* NB: callers *must* call dmu_recv_end() if this succeeds.
*/
int
dmu_recv_stream(dmu_recv_cookie_t *drc, offset_t *voffp)
{
int err = 0;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
struct receive_writer_arg *rwa = kmem_zalloc(sizeof (*rwa), KM_SLEEP);
if (dsl_dataset_has_resume_receive_state(drc->drc_ds)) {
uint64_t bytes = 0;
(void) zap_lookup(drc->drc_ds->ds_dir->dd_pool->dp_meta_objset,
drc->drc_ds->ds_object, DS_FIELD_RESUME_BYTES,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
sizeof (bytes), 1, &bytes);
drc->drc_bytes_read += bytes;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
drc->drc_ignore_objlist = objlist_create();
/* these were verified in dmu_recv_begin */
ASSERT3U(DMU_GET_STREAM_HDRTYPE(drc->drc_drrb->drr_versioninfo), ==,
DMU_SUBSTREAM);
ASSERT3U(drc->drc_drrb->drr_type, <, DMU_OST_NUMTYPES);
ASSERT(dsl_dataset_phys(drc->drc_ds)->ds_flags & DS_FLAG_INCONSISTENT);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT0(drc->drc_os->os_encrypted &&
(drc->drc_featureflags & DMU_BACKUP_FEATURE_EMBED_DATA));
/* handle DSL encryption key payload */
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_featureflags & DMU_BACKUP_FEATURE_RAW) {
nvlist_t *keynvl = NULL;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT(drc->drc_os->os_encrypted);
ASSERT(drc->drc_raw);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = nvlist_lookup_nvlist(drc->drc_begin_nvl, "crypt_keydata",
&keynvl);
if (err != 0)
goto out;
/*
* If this is a new dataset we set the key immediately.
* Otherwise we don't want to change the key until we
* are sure the rest of the receive succeeded so we stash
* the keynvl away until then.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = dsl_crypto_recv_raw(spa_name(drc->drc_os->os_spa),
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
drc->drc_ds->ds_object, drc->drc_fromsnapobj,
drc->drc_drrb->drr_type, keynvl, drc->drc_newfs);
if (err != 0)
goto out;
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
/* see comment in dmu_recv_end_sync() */
drc->drc_ivset_guid = 0;
(void) nvlist_lookup_uint64(keynvl, "to_ivset_guid",
&drc->drc_ivset_guid);
if (!drc->drc_newfs)
drc->drc_keynvl = fnvlist_dup(keynvl);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_featureflags & DMU_BACKUP_FEATURE_RESUMING) {
err = resume_check(drc, drc->drc_begin_nvl);
if (err != 0)
goto out;
}
/*
* If we failed before this point we will clean up any new resume
* state that was created. Now that we've gotten past the initial
* checks we are ok to retain that resume state.
*/
drc->drc_should_save = B_TRUE;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) bqueue_init(&rwa->q, zfs_recv_queue_ff,
MAX(zfs_recv_queue_length, 2 * zfs_max_recordsize),
offsetof(struct receive_record_arg, node));
cv_init(&rwa->cv, NULL, CV_DEFAULT, NULL);
mutex_init(&rwa->mutex, NULL, MUTEX_DEFAULT, NULL);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
rwa->os = drc->drc_os;
rwa->byteswap = drc->drc_byteswap;
rwa->resumable = drc->drc_resumable;
rwa->raw = drc->drc_raw;
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
rwa->spill = drc->drc_spill;
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 20:41:01 +03:00
rwa->full = (drc->drc_drr_begin->drr_u.drr_begin.drr_fromguid == 0);
rwa->os->os_raw_receive = drc->drc_raw;
list_create(&rwa->write_batch, sizeof (struct receive_record_arg),
offsetof(struct receive_record_arg, node.bqn_node));
(void) thread_create(NULL, 0, receive_writer_thread, rwa, 0, curproc,
TS_RUN, minclsyspri);
/*
* We're reading rwa->err without locks, which is safe since we are the
* only reader, and the worker thread is the only writer. It's ok if we
* miss a write for an iteration or two of the loop, since the writer
* thread will keep freeing records we send it until we send it an eos
* marker.
*
* We can leave this loop in 3 ways: First, if rwa->err is
* non-zero. In that case, the writer thread will free the rrd we just
* pushed. Second, if we're interrupted; in that case, either it's the
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
* first loop and drc->drc_rrd was never allocated, or it's later, and
* drc->drc_rrd has been handed off to the writer thread who will free
* it. Finally, if receive_read_record fails or we're at the end of the
* stream, then we free drc->drc_rrd and exit.
*/
while (rwa->err == 0) {
if (issig(JUSTLOOKING) && issig(FORREAL)) {
err = SET_ERROR(EINTR);
break;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT3P(drc->drc_rrd, ==, NULL);
drc->drc_rrd = drc->drc_next_rrd;
drc->drc_next_rrd = NULL;
/* Allocates and loads header into drc->drc_next_rrd */
err = receive_read_record(drc);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_rrd->header.drr_type == DRR_END || err != 0) {
kmem_free(drc->drc_rrd, sizeof (*drc->drc_rrd));
drc->drc_rrd = NULL;
break;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
bqueue_enqueue(&rwa->q, drc->drc_rrd,
sizeof (struct receive_record_arg) +
drc->drc_rrd->payload_size);
drc->drc_rrd = NULL;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT3P(drc->drc_rrd, ==, NULL);
drc->drc_rrd = kmem_zalloc(sizeof (*drc->drc_rrd), KM_SLEEP);
drc->drc_rrd->eos_marker = B_TRUE;
bqueue_enqueue_flush(&rwa->q, drc->drc_rrd, 1);
mutex_enter(&rwa->mutex);
while (!rwa->done) {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* We need to use cv_wait_sig() so that any process that may
* be sleeping here can still fork.
*/
(void) cv_wait_sig(&rwa->cv, &rwa->mutex);
}
mutex_exit(&rwa->mutex);
/*
* If we are receiving a full stream as a clone, all object IDs which
* are greater than the maximum ID referenced in the stream are
* by definition unused and must be freed.
*/
if (drc->drc_clone && drc->drc_drrb->drr_fromguid == 0) {
uint64_t obj = rwa->max_object + 1;
int free_err = 0;
int next_err = 0;
while (next_err == 0) {
free_err = dmu_free_long_object(rwa->os, obj);
if (free_err != 0 && free_err != ENOENT)
break;
next_err = dmu_object_next(rwa->os, &obj, FALSE, 0);
}
if (err == 0) {
if (free_err != 0 && free_err != ENOENT)
err = free_err;
else if (next_err != ESRCH)
err = next_err;
}
}
cv_destroy(&rwa->cv);
mutex_destroy(&rwa->mutex);
bqueue_destroy(&rwa->q);
list_destroy(&rwa->write_batch);
if (err == 0)
err = rwa->err;
out:
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
/*
* If we hit an error before we started the receive_writer_thread
* we need to clean up the next_rrd we create by processing the
* DRR_BEGIN record.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (drc->drc_next_rrd != NULL)
kmem_free(drc->drc_next_rrd, sizeof (*drc->drc_next_rrd));
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
async zvol minor node creation interferes with receive When we finish a zfs receive, dmu_recv_end_sync() calls zvol_create_minors(async=TRUE). This kicks off some other threads that create the minor device nodes (in /dev/zvol/poolname/...). These async threads call zvol_prefetch_minors_impl() and zvol_create_minor(), which both call dmu_objset_own(), which puts a "long hold" on the dataset. Since the zvol minor node creation is asynchronous, this can happen after the `ZFS_IOC_RECV[_NEW]` ioctl and `zfs receive` process have completed. After the first receive ioctl has completed, userland may attempt to do another receive into the same dataset (e.g. the next incremental stream). This second receive and the asynchronous minor node creation can interfere with one another in several different ways, because they both require exclusive access to the dataset: 1. When the second receive is finishing up, dmu_recv_end_check() does dsl_dataset_handoff_check(), which can fail with EBUSY if the async minor node creation already has a "long hold" on this dataset. This causes the 2nd receive to fail. 2. The async udev rule can fail if zvol_id and/or systemd-udevd try to open the device while the the second receive's async attempt at minor node creation owns the dataset (via zvol_prefetch_minors_impl). This causes the minor node (/dev/zd*) to exist, but the udev-generated /dev/zvol/... to not exist. 3. The async minor node creation can silently fail with EBUSY if the first receive's zvol_create_minor() trys to own the dataset while the second receive's zvol_prefetch_minors_impl already owns the dataset. To address these problems, this change synchronously creates the minor node. To avoid the lock ordering problems that the asynchrony was introduced to fix (see #3681), we create the minor nodes from open context, with no locks held, rather than from syncing contex as was originally done. Implementation notes: We generally do not need to traverse children or prefetch anything (e.g. when running the recv, snapshot, create, or clone subcommands of zfs). We only need recursion when importing/opening a pool and when loading encryption keys. The existing recursive, asynchronous, prefetching code is preserved for use in these cases. Channel programs may need to create zvol minor nodes, when creating a snapshot of a zvol with the snapdev property set. We figure out what snapshots are created when running the LUA program in syncing context. In this case we need to remember what snapshots were created, and then try to create their minor nodes from open context, after the LUA code has completed. There are additional zvol use cases that asynchronously own the dataset, which can cause similar problems. E.g. changing the volmode or snapdev properties. These are less problematic because they are not recursive and don't touch datasets that are not involved in the operation, there is still potential for interference with subsequent operations. In the future, these cases should be similarly converted to create the zvol minor node synchronously from open context. The async tasks of removing and renaming minors do not own the objset, so they do not have this problem. However, it may make sense to also convert these operations to happen synchronously from open context, in the future. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-65948 Closes #7863 Closes #9885
2020-02-03 20:33:14 +03:00
/*
* The objset will be invalidated by dmu_recv_end() when we do
* dsl_dataset_clone_swap_sync_impl().
*/
drc->drc_os = NULL;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
kmem_free(rwa, sizeof (*rwa));
nvlist_free(drc->drc_begin_nvl);
if (err != 0) {
/*
* Clean up references. If receive is not resumable,
* destroy what we created, so we don't leave it in
* the inconsistent state.
*/
dmu_recv_cleanup_ds(drc);
nvlist_free(drc->drc_keynvl);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
objlist_destroy(drc->drc_ignore_objlist);
drc->drc_ignore_objlist = NULL;
*voffp = drc->drc_voff;
return (err);
}
static int
dmu_recv_end_check(void *arg, dmu_tx_t *tx)
{
dmu_recv_cookie_t *drc = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
int error;
ASSERT3P(drc->drc_ds->ds_owner, ==, dmu_recv_tag);
if (!drc->drc_newfs) {
dsl_dataset_t *origin_head;
error = dsl_dataset_hold(dp, drc->drc_tofs, FTAG, &origin_head);
if (error != 0)
return (error);
if (drc->drc_force) {
/*
* We will destroy any snapshots in tofs (i.e. before
* origin_head) that are after the origin (which is
* the snap before drc_ds, because drc_ds can not
* have any snaps of its own).
*/
uint64_t obj;
obj = dsl_dataset_phys(origin_head)->ds_prev_snap_obj;
while (obj !=
dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj) {
dsl_dataset_t *snap;
error = dsl_dataset_hold_obj(dp, obj, FTAG,
&snap);
if (error != 0)
break;
if (snap->ds_dir != origin_head->ds_dir)
error = SET_ERROR(EINVAL);
if (error == 0) {
error = dsl_destroy_snapshot_check_impl(
snap, B_FALSE);
}
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_dataset_rele(snap, FTAG);
if (error != 0)
break;
}
if (error != 0) {
dsl_dataset_rele(origin_head, FTAG);
return (error);
}
}
if (drc->drc_keynvl != NULL) {
error = dsl_crypto_recv_raw_key_check(drc->drc_ds,
drc->drc_keynvl, tx);
if (error != 0) {
dsl_dataset_rele(origin_head, FTAG);
return (error);
}
}
error = dsl_dataset_clone_swap_check_impl(drc->drc_ds,
origin_head, drc->drc_force, drc->drc_owner, tx);
if (error != 0) {
dsl_dataset_rele(origin_head, FTAG);
return (error);
}
error = dsl_dataset_snapshot_check_impl(origin_head,
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
drc->drc_tosnap, tx, B_TRUE, 1,
drc->drc_cred, drc->drc_proc);
dsl_dataset_rele(origin_head, FTAG);
if (error != 0)
return (error);
error = dsl_destroy_head_check_impl(drc->drc_ds, 1);
} else {
error = dsl_dataset_snapshot_check_impl(drc->drc_ds,
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 03:18:02 +03:00
drc->drc_tosnap, tx, B_TRUE, 1,
drc->drc_cred, drc->drc_proc);
}
return (error);
}
static void
dmu_recv_end_sync(void *arg, dmu_tx_t *tx)
{
dmu_recv_cookie_t *drc = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
boolean_t encrypted = drc->drc_ds->ds_dir->dd_crypto_obj != 0;
uint64_t newsnapobj;
spa_history_log_internal_ds(drc->drc_ds, "finish receiving",
tx, "snap=%s", drc->drc_tosnap);
drc->drc_ds->ds_objset->os_raw_receive = B_FALSE;
if (!drc->drc_newfs) {
dsl_dataset_t *origin_head;
VERIFY0(dsl_dataset_hold(dp, drc->drc_tofs, FTAG,
&origin_head));
if (drc->drc_force) {
/*
* Destroy any snapshots of drc_tofs (origin_head)
* after the origin (the snap before drc_ds).
*/
uint64_t obj;
obj = dsl_dataset_phys(origin_head)->ds_prev_snap_obj;
while (obj !=
dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj) {
dsl_dataset_t *snap;
VERIFY0(dsl_dataset_hold_obj(dp, obj, FTAG,
&snap));
ASSERT3P(snap->ds_dir, ==, origin_head->ds_dir);
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_destroy_snapshot_sync_impl(snap,
B_FALSE, tx);
dsl_dataset_rele(snap, FTAG);
}
}
if (drc->drc_keynvl != NULL) {
dsl_crypto_recv_raw_key_sync(drc->drc_ds,
drc->drc_keynvl, tx);
nvlist_free(drc->drc_keynvl);
drc->drc_keynvl = NULL;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
VERIFY3P(drc->drc_ds->ds_prev, ==,
origin_head->ds_prev);
dsl_dataset_clone_swap_sync_impl(drc->drc_ds,
origin_head, tx);
dmu_objset_from_ds must be called with dp_config_rwlock held The normal lock order is that the dp_config_rwlock must be held before the ds_opening_lock. For example, dmu_objset_hold() does this. However, dmu_objset_open_impl() is called with the ds_opening_lock held, and if the dp_config_rwlock is not already held, it will attempt to acquire it. This may lead to deadlock, since the lock order is reversed. Looking at all the callers of dmu_objset_open_impl() (which is principally the callers of dmu_objset_from_ds()), almost all callers already have the dp_config_rwlock. However, there are a few places in the send and receive code paths that do not. For example: dsl_crypto_populate_key_nvlist, send_cb, dmu_recv_stream, receive_write_byref, redact_traverse_thread. This commit resolves the problem by requiring all callers ot dmu_objset_from_ds() to hold the dp_config_rwlock. In most cases, the code has been restructured such that we call dmu_objset_from_ds() earlier on in the send and receive processes, when we already have the dp_config_rwlock, and save the objset_t until we need it in the middle of the send or receive (similar to what we already do with the dsl_dataset_t). Thus we do not need to acquire the dp_config_rwlock in many new places. I also cleaned up code in dmu_redact_snap() and send_traverse_thread(). Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #9662 Closes #10115
2020-03-12 20:55:02 +03:00
/*
* The objset was evicted by dsl_dataset_clone_swap_sync_impl,
* so drc_os is no longer valid.
*/
drc->drc_os = NULL;
dsl_dataset_snapshot_sync_impl(origin_head,
drc->drc_tosnap, tx);
/* set snapshot's creation time and guid */
dmu_buf_will_dirty(origin_head->ds_prev->ds_dbuf, tx);
dsl_dataset_phys(origin_head->ds_prev)->ds_creation_time =
drc->drc_drrb->drr_creation_time;
dsl_dataset_phys(origin_head->ds_prev)->ds_guid =
drc->drc_drrb->drr_toguid;
dsl_dataset_phys(origin_head->ds_prev)->ds_flags &=
~DS_FLAG_INCONSISTENT;
dmu_buf_will_dirty(origin_head->ds_dbuf, tx);
dsl_dataset_phys(origin_head)->ds_flags &=
~DS_FLAG_INCONSISTENT;
newsnapobj =
dsl_dataset_phys(origin_head)->ds_prev_snap_obj;
dsl_dataset_rele(origin_head, FTAG);
dsl_destroy_head_sync_impl(drc->drc_ds, tx);
if (drc->drc_owner != NULL)
VERIFY3P(origin_head->ds_owner, ==, drc->drc_owner);
} else {
dsl_dataset_t *ds = drc->drc_ds;
dsl_dataset_snapshot_sync_impl(ds, drc->drc_tosnap, tx);
/* set snapshot's creation time and guid */
dmu_buf_will_dirty(ds->ds_prev->ds_dbuf, tx);
dsl_dataset_phys(ds->ds_prev)->ds_creation_time =
drc->drc_drrb->drr_creation_time;
dsl_dataset_phys(ds->ds_prev)->ds_guid =
drc->drc_drrb->drr_toguid;
dsl_dataset_phys(ds->ds_prev)->ds_flags &=
~DS_FLAG_INCONSISTENT;
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_flags &= ~DS_FLAG_INCONSISTENT;
if (dsl_dataset_has_resume_receive_state(ds)) {
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_FROMGUID, tx);
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_OBJECT, tx);
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_OFFSET, tx);
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_BYTES, tx);
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_TOGUID, tx);
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_TONAME, tx);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) zap_remove(dp->dp_meta_objset, ds->ds_object,
DS_FIELD_RESUME_REDACT_BOOKMARK_SNAPS, tx);
}
newsnapobj =
dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj;
}
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
/*
* If this is a raw receive, the crypt_keydata nvlist will include
* a to_ivset_guid for us to set on the new snapshot. This value
* will override the value generated by the snapshot code. However,
* this value may not be present, because older implementations of
* the raw send code did not include this value, and we are still
* allowed to receive them if the zfs_disable_ivset_guid_check
* tunable is set, in which case we will leave the newly-generated
* value.
*/
if (drc->drc_raw && drc->drc_ivset_guid != 0) {
dmu_object_zapify(dp->dp_meta_objset, newsnapobj,
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
DMU_OT_DSL_DATASET, tx);
VERIFY0(zap_update(dp->dp_meta_objset, newsnapobj,
Detect and prevent mixed raw and non-raw sends Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8308
2019-02-04 22:24:55 +03:00
DS_FIELD_IVSET_GUID, sizeof (uint64_t), 1,
&drc->drc_ivset_guid, tx));
}
/*
* Release the hold from dmu_recv_begin. This must be done before
* we return to open context, so that when we free the dataset's dnode
* we can evict its bonus buffer. Since the dataset may be destroyed
* at this point (and therefore won't have a valid pointer to the spa)
* we release the key mapping manually here while we do have a valid
* pointer, if it exists.
*/
if (!drc->drc_raw && encrypted) {
(void) spa_keystore_remove_mapping(dmu_tx_pool(tx)->dp_spa,
drc->drc_ds->ds_object, drc->drc_ds);
}
dsl_dataset_disown(drc->drc_ds, 0, dmu_recv_tag);
drc->drc_ds = NULL;
}
static int dmu_recv_end_modified_blocks = 3;
static int
dmu_recv_existing_end(dmu_recv_cookie_t *drc)
{
#ifdef _KERNEL
/*
* We will be destroying the ds; make sure its origin is unmounted if
* necessary.
*/
char name[ZFS_MAX_DATASET_NAME_LEN];
dsl_dataset_name(drc->drc_ds, name);
zfs_destroy_unmount_origin(name);
#endif
return (dsl_sync_task(drc->drc_tofs,
dmu_recv_end_check, dmu_recv_end_sync, drc,
dmu_recv_end_modified_blocks, ZFS_SPACE_CHECK_NORMAL));
}
static int
dmu_recv_new_end(dmu_recv_cookie_t *drc)
{
return (dsl_sync_task(drc->drc_tofs,
dmu_recv_end_check, dmu_recv_end_sync, drc,
dmu_recv_end_modified_blocks, ZFS_SPACE_CHECK_NORMAL));
}
int
dmu_recv_end(dmu_recv_cookie_t *drc, void *owner)
{
int error;
drc->drc_owner = owner;
if (drc->drc_newfs)
error = dmu_recv_new_end(drc);
else
error = dmu_recv_existing_end(drc);
if (error != 0) {
dmu_recv_cleanup_ds(drc);
nvlist_free(drc->drc_keynvl);
async zvol minor node creation interferes with receive When we finish a zfs receive, dmu_recv_end_sync() calls zvol_create_minors(async=TRUE). This kicks off some other threads that create the minor device nodes (in /dev/zvol/poolname/...). These async threads call zvol_prefetch_minors_impl() and zvol_create_minor(), which both call dmu_objset_own(), which puts a "long hold" on the dataset. Since the zvol minor node creation is asynchronous, this can happen after the `ZFS_IOC_RECV[_NEW]` ioctl and `zfs receive` process have completed. After the first receive ioctl has completed, userland may attempt to do another receive into the same dataset (e.g. the next incremental stream). This second receive and the asynchronous minor node creation can interfere with one another in several different ways, because they both require exclusive access to the dataset: 1. When the second receive is finishing up, dmu_recv_end_check() does dsl_dataset_handoff_check(), which can fail with EBUSY if the async minor node creation already has a "long hold" on this dataset. This causes the 2nd receive to fail. 2. The async udev rule can fail if zvol_id and/or systemd-udevd try to open the device while the the second receive's async attempt at minor node creation owns the dataset (via zvol_prefetch_minors_impl). This causes the minor node (/dev/zd*) to exist, but the udev-generated /dev/zvol/... to not exist. 3. The async minor node creation can silently fail with EBUSY if the first receive's zvol_create_minor() trys to own the dataset while the second receive's zvol_prefetch_minors_impl already owns the dataset. To address these problems, this change synchronously creates the minor node. To avoid the lock ordering problems that the asynchrony was introduced to fix (see #3681), we create the minor nodes from open context, with no locks held, rather than from syncing contex as was originally done. Implementation notes: We generally do not need to traverse children or prefetch anything (e.g. when running the recv, snapshot, create, or clone subcommands of zfs). We only need recursion when importing/opening a pool and when loading encryption keys. The existing recursive, asynchronous, prefetching code is preserved for use in these cases. Channel programs may need to create zvol minor nodes, when creating a snapshot of a zvol with the snapdev property set. We figure out what snapshots are created when running the LUA program in syncing context. In this case we need to remember what snapshots were created, and then try to create their minor nodes from open context, after the LUA code has completed. There are additional zvol use cases that asynchronously own the dataset, which can cause similar problems. E.g. changing the volmode or snapdev properties. These are less problematic because they are not recursive and don't touch datasets that are not involved in the operation, there is still potential for interference with subsequent operations. In the future, these cases should be similarly converted to create the zvol minor node synchronously from open context. The async tasks of removing and renaming minors do not own the objset, so they do not have this problem. However, it may make sense to also convert these operations to happen synchronously from open context, in the future. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-65948 Closes #7863 Closes #9885
2020-02-03 20:33:14 +03:00
} else {
if (drc->drc_newfs) {
zvol_create_minor(drc->drc_tofs);
}
char *snapname = kmem_asprintf("%s@%s",
drc->drc_tofs, drc->drc_tosnap);
zvol_create_minor(snapname);
kmem_strfree(snapname);
}
return (error);
}
/*
* Return TRUE if this objset is currently being received into.
*/
boolean_t
dmu_objset_is_receiving(objset_t *os)
{
return (os->os_dsl_dataset != NULL &&
os->os_dsl_dataset->ds_owner == dmu_recv_tag);
}
/* BEGIN CSTYLED */
ZFS_MODULE_PARAM(zfs_recv, zfs_recv_, queue_length, INT, ZMOD_RW,
"Maximum receive queue length");
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ZFS_MODULE_PARAM(zfs_recv, zfs_recv_, queue_ff, INT, ZMOD_RW,
"Receive queue fill fraction");
ZFS_MODULE_PARAM(zfs_recv, zfs_recv_, write_batch_size, INT, ZMOD_RW,
"Maximum amount of writes to batch into one transaction");
/* END CSTYLED */