c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 10:01:01 +03:00
Code Issues Packages Projects Releases Wiki Activity
a41d0b29a9
mirror_zfs/config/kernel-vfs-iterate.m4

84 lines
2.2 KiB
Plaintext
Raw Normal View History

Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_VFS_ITERATE], [
ZFS_LINUX_TEST_SRC([file_operations_iterate_shared], [
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
#include <linux/fs.h>
Linux 6.8 compat: make test functions static The kernel is now being compiled with -Wmissing-prototypes. Most of our test stub functions had no prototype, and failed to compile. Since they don't need to be visible anywhere else, just make them all static. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <robn@despairlabs.com> Sponsored-by: https://despairlabs.com/sponsor/ Closes #15805
2024-01-23 02:50:53 +03:00
static int iterate(struct file *filp, struct dir_context * context)
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
{ return 0; }
static const struct file_operations fops
__attribute__ ((unused)) = {
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
.iterate_shared = iterate,
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
ZFS_LINUX_TEST_SRC([file_operations_iterate], [
#include <linux/fs.h>
Linux 6.8 compat: make test functions static The kernel is now being compiled with -Wmissing-prototypes. Most of our test stub functions had no prototype, and failed to compile. Since they don't need to be visible anywhere else, just make them all static. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <robn@despairlabs.com> Sponsored-by: https://despairlabs.com/sponsor/ Closes #15805
2024-01-23 02:50:53 +03:00
static int iterate(struct file *filp,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
struct dir_context *context) { return 0; }
static const struct file_operations fops
__attribute__ ((unused)) = {
.iterate = iterate,
};
#if defined(FMODE_KABI_ITERATE)
#error "RHEL 7.5, FMODE_KABI_ITERATE interface"
#endif
],[])
ZFS_LINUX_TEST_SRC([file_operations_readdir], [
#include <linux/fs.h>
Linux 6.8 compat: make test functions static The kernel is now being compiled with -Wmissing-prototypes. Most of our test stub functions had no prototype, and failed to compile. Since they don't need to be visible anywhere else, just make them all static. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <robn@despairlabs.com> Sponsored-by: https://despairlabs.com/sponsor/ Closes #15805
2024-01-23 02:50:53 +03:00
static int readdir(struct file *filp, void *entry,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
filldir_t func) { return 0; }
static const struct file_operations fops
__attribute__ ((unused)) = {
.readdir = readdir,
};
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_VFS_ITERATE], [
dnl #
dnl # 4.7 API change
dnl #
AC_MSG_CHECKING([whether fops->iterate_shared() is available])
ZFS_LINUX_TEST_RESULT([file_operations_iterate_shared], [
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
AC_MSG_RESULT(yes)
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_DEFINE(HAVE_VFS_ITERATE_SHARED, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
[fops->iterate_shared() is available])
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
],[
AC_MSG_RESULT(no)
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
dnl #
dnl # 3.11 API change
dnl #
RHEL 7.5 compat: FMODE_KABI_ITERATE As of RHEL 7.5 the mainline fops.iterate() method was added to the file_operations structure and is correctly detected by the configure script. Normally this is what we want, but in order to maintain KABI compatibility the RHEL change additionally does the following: * Requires that callers intending to use this extended interface set the FMODE_KABI_ITERATE flag on the file structure when opening the directory. * Adds the fops.iterate() method to the end of the structure, without removing fops.readdir(). This change updates the configure check to ignore the RHEL 7.5+ variant of fops.iterate() when detected. Instead fallback to the fops.readdir() interface which will be available. Finally, add the 'zpl_' prefix to the directory context wrappers to avoid colliding with the kernel provided symbols when both the fops.iterate() and fops.readdir() are provided by the kernel. Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7460 Closes #7463
2018-05-03 01:01:24 +03:00
dnl # RHEL 7.5 compatibility; the fops.iterate() method was
dnl # added to the file_operations structure but in order to
dnl # maintain KABI compatibility all callers must set
dnl # FMODE_KABI_ITERATE which is checked in iterate_dir().
dnl # When detected ignore this interface and fallback to
dnl # to using fops.readdir() to retain KABI compatibility.
dnl #
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_MSG_CHECKING([whether fops->iterate() is available])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_RESULT([file_operations_iterate], [
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
AC_MSG_RESULT(yes)
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_DEFINE(HAVE_VFS_ITERATE, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
[fops->iterate() is available])
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
],[
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_MSG_RESULT(no)
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
dnl #
dnl # readdir interface introduced
dnl #
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_MSG_CHECKING([whether fops->readdir() is available])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_RESULT([file_operations_readdir], [
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_VFS_READDIR, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
[fops->readdir() is available])
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
],[
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_ERROR([vfs_iterate])
Linux 4.7 compat: use iterate_shared for concurrent readdir Register iterate_shared if it exists so the kernel will used shared lock and allowing concurrent readdir. Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE to allow concurrent seeking. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4664 Closes #4665
2016-05-19 00:30:20 +03:00
])
])
Linux 3.11 compat: fops->iterate() Commit torvalds/linux@2233f31aade393641f0eaed43a71110e629bb900 replaced ->readdir() with ->iterate() in struct file_operations. All filesystems must now use the new ->iterate method. To handle this the code was reworked to use the new ->iterate interface. Care was taken to keep the majority of changes confined to the ZPL layer which is already Linux specific. However, minor changes were required to the common zfs_readdir() function. Compatibility with older kernels was accomplished by adding versions of the trivial dir_emit* helper functions. Also the various *_readdir() functions were reworked in to wrappers which create a dir_context structure to pass to the new *_iterate() functions. Unfortunately, the new dir_emit* functions prevent us from passing a private pointer to the filldir function. The xattr directory code leveraged this ability through zfs_readdir() to generate the list of xattr names. Since we can no longer use zfs_readdir() a simplified zpl_xattr_readdir() function was added to perform the same task. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1653 Issue #1591
2013-08-07 16:53:45 +04:00
])
])
Reference in New Issue Copy Permalink