c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
a0d3fe72bf
mirror_zfs/tests/zfs-tests/include/tunables.cfg

106 lines
6.2 KiB
INI
Raw Normal View History

ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
# This file exports variables for each tunable used in the test suite.
#
# Different platforms use different names for most tunables. To avoid littering
# the tests with conditional logic for deciding how to set each tunable, the
# logic is instead consolidated to this one file.
#
# Any use of tunables in tests must use a name defined here. New entries
# should be added to the table as needed. Please keep the table sorted
# alphabetically for ease of maintenance.
#
# Platform-specific tunables should still use a NAME from this table for
# consistency. Enter UNSUPPORTED in the column for platforms on which the
# tunable is not implemented.
UNAME=$(uname)
# NAME FreeBSD tunable Linux tunable
cat <<%%%% |
ADMIN_SNAPSHOT UNSUPPORTED zfs_admin_snapshot
ALLOW_REDACTED_DATASET_MOUNT allow_redacted_dataset_mount zfs_allow_redacted_dataset_mount
ARC_MAX arc.max zfs_arc_max
ARC_MIN arc.min zfs_arc_min
ASYNC_BLOCK_MAX_BLOCKS async_block_max_blocks zfs_async_block_max_blocks
CHECKSUM_EVENTS_PER_SECOND checksum_events_per_second zfs_checksum_events_per_second
COMMIT_TIMEOUT_PCT commit_timeout_pct zfs_commit_timeout_pct
COMPRESSED_ARC_ENABLED compressed_arc_enabled zfs_compressed_arc_enabled
CONDENSE_INDIRECT_COMMIT_ENTRY_DELAY_MS condense.indirect_commit_entry_delay_ms zfs_condense_indirect_commit_entry_delay_ms
ZTS: fix removal_condense_export test case It's been observed in the CI that the required 25% of obsolete bytes in the mapping can be to high a threshold for this test resulting in condensing never being triggered and a test failure. To prevent these failures make the existing zfs_condense_indirect_obsolete_pct tuning available so the obsolete percentage can be reduced from 25% to 5% during this test. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11869
2021-04-12 07:49:13 +03:00
CONDENSE_INDIRECT_OBSOLETE_PCT condense.indirect_obsolete_pct zfs_condense_indirect_obsolete_pct
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
CONDENSE_MIN_MAPPING_BYTES condense.min_mapping_bytes zfs_condense_min_mapping_bytes
Assorted fixes for the performance tests - Bail out early if we're running the perf tests and forget to specify disks. - Allow perf tests to run with any number of disks. - Remove weekly vs. nightly settings - Move variables with common values to perf.shlib - Use zinject to clear the ARC over export/import - Fix dbuf cache size calculation When the meaning of `dbuf_cache_max_bytes` changed, the performance test that covers the dbuf cache started to fail. The test would try to write files for the test using the max possible size of the cache, inevitably filling the pool and failing. This change uses `dbuf_cache_shift` to correctly calculate the dbuf cache size. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: John Kennedy <john.kennedy@delphix.com> Closes #12408
2021-07-27 00:47:08 +03:00
DBUF_CACHE_SHIFT dbuf.cache_shift dbuf_cache_shift
FreeBSD: Fix scope of deadman tunables A few deadman tunables ended up in the wrong sysctl node. Move them to vfs.zfs.deadman.* Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #11715
2021-03-12 06:23:24 +03:00
DEADMAN_CHECKTIME_MS deadman.checktime_ms zfs_deadman_checktime_ms
DEADMAN_FAILMODE deadman.failmode zfs_deadman_failmode
DEADMAN_SYNCTIME_MS deadman.synctime_ms zfs_deadman_synctime_ms
DEADMAN_ZIOTIME_MS deadman.ziotime_ms zfs_deadman_ziotime_ms
ZTS: FreeBSD tunable for DISABLE_IVSET_GUID_CHECK Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9907
2020-01-29 22:25:15 +03:00
DISABLE_IVSET_GUID_CHECK disable_ivset_guid_check zfs_disable_ivset_guid_check
Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency When using lseek(2) to report data/holes memory mapped regions of the file were ignored. This could result in incorrect results. To handle this zfs_holey_common() was updated to asynchronously writeback any dirty mmap(2) regions prior to reporting holes. Additionally, while not strictly required, the dn_struct_rwlock is now held over the dirty check to prevent the dnode structure from changing. This ensures that a clean dnode can't be dirtied before the data/hole is located. The range lock is now also taken to ensure the call cannot race with zfs_write(). Furthermore, the code was refactored to provide a dnode_is_dirty() helper function which checks the dnode for any dirty records to determine its dirtiness. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Rich Ercolani <rincebrain@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #11900 Closes #12724
2021-11-08 00:27:44 +03:00
DMU_OFFSET_NEXT_SYNC dmu_offset_next_sync zfs_dmu_offset_next_sync
RAID-Z expansion feature This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
2023-11-08 21:19:41 +03:00
EMBEDDED_SLOG_MIN_MS embedded_slog_min_ms zfs_embedded_slog_min_ms
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
INITIALIZE_CHUNK_SIZE initialize_chunk_size zfs_initialize_chunk_size
INITIALIZE_VALUE initialize_value zfs_initialize_value
KEEP_LOG_SPACEMAPS_AT_EXPORT keep_log_spacemaps_at_export zfs_keep_log_spacemaps_at_export
Fix lua stack overflow on recursive call to gsub() The `zfs program` subcommand invokes a LUA interpreter to run ZFS "channel programs". This interpreter runs in a constrained environment, with defined memory limits. The LUA stack (used for LUA functions that call each other) is allocated in the kernel's heap, and is limited by the `-m MEMORY-LIMIT` flag and the `zfs_lua_max_memlimit` module parameter. The C stack is used by certain LUA features that are implemented in C. The C stack is limited by `LUAI_MAXCCALLS=20`, which limits call depth. Some LUA C calls use more stack space than others, and `gsub()` uses an unusually large amount. With a programming trick, it can be invoked recursively using the C stack (rather than the LUA stack). This overflows the 16KB Linux kernel stack after about 11 iterations, less than the limit of 20. One solution would be to decrease `LUAI_MAXCCALLS`. This could be made to work, but it has a few drawbacks: 1. The existing test suite does not pass with `LUAI_MAXCCALLS=10`. 2. There may be other LUA functions that use a lot of stack space, and the stack space may change depending on compiler version and options. This commit addresses the problem by adding a new limit on the amount of free space (in bytes) remaining on the C stack while running the LUA interpreter: `LUAI_MINCSTACK=4096`. If there is less than this amount of stack space remaining, a LUA runtime error is generated. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Allan Jude <allanjude@freebsd.org> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10611 Closes #10613
2020-07-28 02:11:47 +03:00
LUA_MAX_MEMLIMIT lua.max_memlimit zfs_lua_max_memlimit
Add L2ARC arcstats for MFU/MRU buffers and buffer content type Currently the ARC state (MFU/MRU) of cached L2ARC buffer and their content type is unknown. Knowing this information may prove beneficial in adjusting the L2ARC caching policy. This commit adds L2ARC arcstats that display the aligned size (in bytes) of L2ARC buffers according to their content type (data/metadata) and according to their ARC state (MRU/MFU or prefetch). It also expands the existing evict_l2_eligible arcstat to differentiate between MFU and MRU buffers. L2ARC caches buffers from the MRU and MFU lists of ARC. Upon caching a buffer, its ARC state (MRU/MFU) is stored in the L2 header (b_arcs_state). The l2_m{f,r}u_asize arcstats reflect the aligned size (in bytes) of L2ARC buffers according to their ARC state (based on b_arcs_state). We also account for the case where an L2ARC and ARC cached MRU or MRU_ghost buffer transitions to MFU. The l2_prefetch_asize reflects the alinged size (in bytes) of L2ARC buffers that were cached while they had the prefetch flag set in ARC. This is dynamically updated as the prefetch flag of L2ARC buffers changes. When buffers are evicted from ARC, if they are determined to be L2ARC eligible then their logical size is recorded in evict_l2_eligible_m{r,f}u arcstats according to their ARC state upon eviction. Persistent L2ARC: When committing an L2ARC buffer to a log block (L2ARC metadata) its b_arcs_state and prefetch flag is also stored. If the buffer changes its arcstate or prefetch flag this is reflected in the above arcstats. However, the L2ARC metadata cannot currently be updated to reflect this change. Example: L2ARC caches an MRU buffer. L2ARC metadata and arcstats count this as an MRU buffer. The buffer transitions to MFU. The arcstats are updated to reflect this. Upon pool re-import or on/offlining the L2ARC device the arcstats are cleared and the buffer will now be counted as an MRU buffer, as the L2ARC metadata were not updated. Bug fix: - If l2arc_noprefetch is set, arc_read_done clears the L2CACHE flag of an ARC buffer. However, prefetches may be issued in a way that arc_read_done() is bypassed. Instead, move the related code in l2arc_write_eligible() to account for those cases too. Also add a test and update manpages for l2arc_mfuonly module parameter, and update the manpages and code comments for l2arc_noprefetch. Move persist_l2arc tests to l2arc. Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10743
2020-09-14 20:10:44 +03:00
L2ARC_MFUONLY l2arc.mfuonly l2arc_mfuonly
Reset l2ad_hand and l2ad_first in l2arc_evict Increasing l2arc_write_size or l2arc_write_boost can result in l2arc_write_buffers() not having enough space to perform its writes and panic zio_write_phys(). Instead of resetting l2ad_hand to l2ad_start at the end of l2arc_write_buffers() and not taking into account a possible user-mediated increase of l2arc_write_max, we do this in l2arc_evict(), right after l2arc_write_size() has run. If there is not enough space to evict (ie we will exceed l2ad_end) we evict to the end of the device, reset l2ad_hand to l2ad_start, set l2ad_first to 0 and iterate l2arc_evict(). We avoid infinite iteration of l2arc_evict() by making sure in l2arc_write_size() that l2ad_start + size does not exceed l2ad_end. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10154
2020-03-31 20:46:48 +03:00
L2ARC_NOPREFETCH l2arc.noprefetch l2arc_noprefetch
Add FreeBSD support to OpenZFS Add the FreeBSD platform code to the OpenZFS repository. As of this commit the source can be compiled and tested on FreeBSD 11 and 12. Subsequent commits are now required to compile on FreeBSD and Linux. Additionally, they must pass the ZFS Test Suite on FreeBSD which is being run by the CI. As of this commit 1230 tests pass on FreeBSD and there are no unexpected failures. Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #898 Closes #8987
2020-04-14 21:36:28 +03:00
L2ARC_REBUILD_BLOCKS_MIN_L2SIZE l2arc.rebuild_blocks_min_l2size l2arc_rebuild_blocks_min_l2size
L2ARC_REBUILD_ENABLED l2arc.rebuild_enabled l2arc_rebuild_enabled
ZTS: FreeBSD does have a l2arc.trim_ahead tunable Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10633
2020-08-01 07:18:32 +03:00
L2ARC_TRIM_AHEAD l2arc.trim_ahead l2arc_trim_ahead
Reset l2ad_hand and l2ad_first in l2arc_evict Increasing l2arc_write_size or l2arc_write_boost can result in l2arc_write_buffers() not having enough space to perform its writes and panic zio_write_phys(). Instead of resetting l2ad_hand to l2ad_start at the end of l2arc_write_buffers() and not taking into account a possible user-mediated increase of l2arc_write_max, we do this in l2arc_evict(), right after l2arc_write_size() has run. If there is not enough space to evict (ie we will exceed l2ad_end) we evict to the end of the device, reset l2ad_hand to l2ad_start, set l2ad_first to 0 and iterate l2arc_evict(). We avoid infinite iteration of l2arc_evict() by making sure in l2arc_write_size() that l2ad_start + size does not exceed l2ad_end. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10154
2020-03-31 20:46:48 +03:00
L2ARC_WRITE_BOOST l2arc.write_boost l2arc_write_boost
L2ARC_WRITE_MAX l2arc.write_max l2arc_write_max
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
LIVELIST_CONDENSE_NEW_ALLOC livelist.condense.new_alloc zfs_livelist_condense_new_alloc
LIVELIST_CONDENSE_SYNC_CANCEL livelist.condense.sync_cancel zfs_livelist_condense_sync_cancel
LIVELIST_CONDENSE_SYNC_PAUSE livelist.condense.sync_pause zfs_livelist_condense_sync_pause
LIVELIST_CONDENSE_ZTHR_CANCEL livelist.condense.zthr_cancel zfs_livelist_condense_zthr_cancel
LIVELIST_CONDENSE_ZTHR_PAUSE livelist.condense.zthr_pause zfs_livelist_condense_zthr_pause
LIVELIST_MAX_ENTRIES livelist.max_entries zfs_livelist_max_entries
LIVELIST_MIN_PERCENT_SHARED livelist.min_percent_shared zfs_livelist_min_percent_shared
MAX_DATASET_NESTING max_dataset_nesting zfs_max_dataset_nesting
MAX_MISSING_TVDS max_missing_tvds zfs_max_missing_tvds
METASLAB_DEBUG_LOAD metaslab.debug_load metaslab_debug_load
METASLAB_FORCE_GANGING metaslab.force_ganging metaslab_force_ganging
MULTIHOST_FAIL_INTERVALS multihost.fail_intervals zfs_multihost_fail_intervals
Make spa_stats.c tunables visible on FreeBSD Use ZFS_MODULE_PARAM for cross-platform tunables in spa_stats.c, and add update tunables.cfg in tests for the newly supported ones. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10858
2020-09-02 02:19:19 +03:00
MULTIHOST_HISTORY multihost.history zfs_multihost_history
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
MULTIHOST_IMPORT_INTERVALS multihost.import_intervals zfs_multihost_import_intervals
Add zfs_multihost_interval tunable handler for FreeBSD This tunable required a handler to be implemented for ZFS_MODULE_PARAM_CALL. Add the handler so the tunable can be declared in common code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10490
2020-06-23 23:32:42 +03:00
MULTIHOST_INTERVAL multihost.interval zfs_multihost_interval
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
OVERRIDE_ESTIMATE_RECORDSIZE send.override_estimate_recordsize zfs_override_estimate_recordsize
Make L2ARC tests more robust Instead of relying on arbitrary timers after pool export/import or cache device off/online rely on arcstats. This makes the L2ARC tests more robust. Also cleanup some functions related to persistent L2ARC. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10983
2020-10-06 01:29:05 +03:00
PREFETCH_DISABLE prefetch.disable zfs_prefetch_disable
RAID-Z expansion feature This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
2023-11-08 21:19:41 +03:00
RAIDZ_EXPAND_MAX_REFLOW_BYTES vdev.expand_max_reflow_bytes raidz_expand_max_reflow_bytes
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
REBUILD_SCRUB_ENABLED rebuild_scrub_enabled zfs_rebuild_scrub_enabled
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
REMOVAL_SUSPEND_PROGRESS removal_suspend_progress zfs_removal_suspend_progress
REMOVE_MAX_SEGMENT remove_max_segment zfs_remove_max_segment
RESILVER_MIN_TIME_MS resilver_min_time_ms zfs_resilver_min_time_ms
Resilver restarts unnecessarily when it encounters errors When a resilver finishes, vdev_dtl_reassess is called to hopefully excise DTL_MISSING (amongst other things). If there are errors during the resilver, they are tracked in DTL_SCRUB, as spelled out in the block comment in vdev.c. DTL_SCRUB is in-core only, so it can only be used if the pool was online for the whole resilver. This state is tracked with the spa_scrub_started flag, which only gets set when the scan is initialized. Unfortunately, this flag gets cleared right before vdev_dtl_reassess gets called, so if there are any errors during the scan, DTL_MISSING will never get excised and the resilver will just continually restart. This fix simply moves clearing that flag until after the call to vdev_dtl_reasses. In addition, if a pool is imported and already has scn_errors > 0, this change will restart the resilver immediately instead of doing the rest of the scan and then restarting it from the beginning. On the other hand, if scn_errors == 0 at import, then no errors have been encountered so far, so the spa_scrub_started flag can be safely set. A test has been added to verify that resilver does not restart when relevant DTL's are available. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: John Poduska <jpoduska@datto.com> Closes #10291
2020-05-13 20:54:27 +03:00
SCAN_LEGACY scan_legacy zfs_scan_legacy
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
SCAN_SUSPEND_PROGRESS scan_suspend_progress zfs_scan_suspend_progress
SCAN_VDEV_LIMIT scan_vdev_limit zfs_scan_vdev_limit
RAID-Z expansion feature This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
2023-11-08 21:19:41 +03:00
SCRUB_AFTER_EXPAND scrub_after_expand zfs_scrub_after_expand
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
SEND_HOLES_WITHOUT_BIRTH_TIME send_holes_without_birth_time send_holes_without_birth_time
SLOW_IO_EVENTS_PER_SECOND slow_io_events_per_second zfs_slow_io_events_per_second
SPA_ASIZE_INFLATION spa.asize_inflation spa_asize_inflation
SPA_DISCARD_MEMORY_LIMIT spa.discard_memory_limit zfs_spa_discard_memory_limit
SPA_LOAD_VERIFY_DATA spa.load_verify_data spa_load_verify_data
SPA_LOAD_VERIFY_METADATA spa.load_verify_metadata spa_load_verify_metadata
TRIM_EXTENT_BYTES_MIN trim.extent_bytes_min zfs_trim_extent_bytes_min
TRIM_METASLAB_SKIP trim.metaslab_skip zfs_trim_metaslab_skip
TRIM_TXG_BATCH trim.txg_batch zfs_trim_txg_batch
Make spa_stats.c tunables visible on FreeBSD Use ZFS_MODULE_PARAM for cross-platform tunables in spa_stats.c, and add update tunables.cfg in tests for the newly supported ones. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10858
2020-09-02 02:19:19 +03:00
TXG_HISTORY txg.history zfs_txg_history
Update FreeBSD tunables Remove some obsolete legacy compat, rename some misnamed, and add some missing tunables for FreeBSD. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10203
2020-04-15 21:14:47 +03:00
TXG_TIMEOUT txg.timeout zfs_txg_timeout
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
UNLINK_SUSPEND_PROGRESS UNSUPPORTED zfs_unlink_suspend_progress
Improve too large physical ashift handling When iterating through children physical ashifts for vdev, prefer ones above the maximum logical ashift, that we can actually use, but within the administrator defined maximum. When selecting top-level vdev ashift, do not set it to the defined maximum in case physical ashift is even higher, but just ignore one. Using the maximum does not prevent misaligned writes, but reduces space efficiency. Since ZFS tries to write data sequentially and aggregates the writes, in many cases large misanigned writes may be not as bad as the space penalty otherwise. Allow internal physical ashifts for vdevs higher than SHIFT_MAX. May be one day allocator or aggregation could benefit from that. Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB), so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB), but only if it really has to or explicitly told to, but not as an "optimization". There are some read-intensive NVMe SSDs that report Preferred Write Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a space inefficiency that can't be justified. Instead these changes make ZFS fall back to logical ashift of 12 (4KB) by default and only warn user that it may be suboptimal for performance. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored by: iXsystems, Inc. Closes #13798
2022-09-08 20:30:53 +03:00
VDEV_FILE_LOGICAL_ASHIFT vdev.file.logical_ashift vdev_file_logical_ashift
vdev_ashift should only be set once == Motivation and Context The new vdev ashift optimization prevents the removal of devices when a zfs configuration is comprised of disks which have different logical and physical block sizes. This is caused because we set 'spa_min_ashift' in vdev_open and then later call 'vdev_ashift_optimize'. This would result in an inconsistency between spa's ashift calculations and that of the top-level vdev. In addition, the optimization logical ignores the overridden ashift value that would be provided by '-o ashift=<val>'. == Description This change reworks the vdev ashift optimization so that it's only set the first time the device is configured. It still allows the physical and logical ahsift values to be set every time the device is opened but those values are only consulted on first open. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Cedric Berger <cedric@precidata.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-71831 Closes #10932
2020-09-18 22:13:47 +03:00
VDEV_FILE_PHYSICAL_ASHIFT vdev.file.physical_ashift vdev_file_physical_ashift
Improve too large physical ashift handling When iterating through children physical ashifts for vdev, prefer ones above the maximum logical ashift, that we can actually use, but within the administrator defined maximum. When selecting top-level vdev ashift, do not set it to the defined maximum in case physical ashift is even higher, but just ignore one. Using the maximum does not prevent misaligned writes, but reduces space efficiency. Since ZFS tries to write data sequentially and aggregates the writes, in many cases large misanigned writes may be not as bad as the space penalty otherwise. Allow internal physical ashifts for vdevs higher than SHIFT_MAX. May be one day allocator or aggregation could benefit from that. Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB), so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB), but only if it really has to or explicitly told to, but not as an "optimization". There are some read-intensive NVMe SSDs that report Preferred Write Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a space inefficiency that can't be justified. Instead these changes make ZFS fall back to logical ashift of 12 (4KB) by default and only warn user that it may be suboptimal for performance. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored by: iXsystems, Inc. Closes #13798
2022-09-08 20:30:53 +03:00
VDEV_MAX_AUTO_ASHIFT vdev.max_auto_ashift zfs_vdev_max_auto_ashift
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
VDEV_MIN_MS_COUNT vdev.min_ms_count zfs_vdev_min_ms_count
VDEV_VALIDATE_SKIP vdev.validate_skip vdev_validate_skip
VOL_INHIBIT_DEV UNSUPPORTED zvol_inhibit_dev
VOL_MODE vol.mode zvol_volmode
VOL_RECURSIVE vol.recursive UNSUPPORTED
Revert "zvol: Temporally disable blk-mq" This reverts commit aefb6a2bd6c24597cde655e9ce69edd0a4c34357. aefb6a2bd temporally disabled blk-mq until we could fix a fix for Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #15439
2023-10-24 00:39:59 +03:00
VOL_USE_BLK_MQ UNSUPPORTED zvol_use_blk_mq
Add a tunable to disable BRT support. Copy the disable parameter that FreeBSD implemented, and extend it to work on Linux as well, until we're sure this is stable. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes #15529
2023-11-16 22:35:22 +03:00
BCLONE_ENABLED zfs_bclone_enabled zfs_bclone_enabled
Cross-platform xattr user namespace compatibility ZFS on Linux originally implemented xattr namespaces in a way that is incompatible with other operating systems. On illumos, xattrs do not have namespaces. Every xattr name is visible. FreeBSD has two universally defined namespaces: EXTATTR_NAMESPACE_USER and EXTATTR_NAMESPACE_SYSTEM. The system namespace is used for protected FreeBSD-specific attributes such as MAC labels and pnfs state. These attributes have the namespace string "freebsd:system:" prefixed to the name in the encoding scheme used by ZFS. The user namespace is used for general purpose user attributes and obeys normal access control mechanisms. These attributes have no namespace string prefixed, so xattrs written on illumos are accessible in the user namespace on FreeBSD, and xattrs written to the user namespace on FreeBSD are accessible by the same name on illumos. Linux has several xattr namespaces. On Linux, ZFS encodes the namespace in the xattr name for every namespace, including the user namespace. As a consequence, an xattr in the user namespace with the name "foo" is stored by ZFS with the name "user.foo" and therefore appears on FreeBSD and illumos to have the name "user.foo" rather than "foo". Conversely, none of the xattrs written on FreeBSD or illumos are accessible on Linux unless the name happens to be prefixed with one of the Linux xattr namespaces, in which case the namespace is stripped from the name. This makes xattrs entirely incompatible between Linux and other platforms. We want to make the encoding of user namespace xattrs compatible across platforms. A critical requirement of this compatibility is for xattrs from existing pools from FreeBSD and illumos to be accessible by the same names in the user namespace on Linux. It is also necessary that existing pools with xattrs written by Linux retain access to those xattrs by the same names on Linux. Making user namespace xattrs from Linux accessible by the correct names on other platforms is important. The handling of other namespaces is not required to be consistent. Add a fallback mechanism for listing and getting xattrs to treat xattrs as being in the user namespace if they do not match a known prefix. Do not allow setting or getting xattrs with a name that is prefixed with one of the namespace names used by ZFS on supported platforms. Allow choosing between legacy illumos and FreeBSD compatibility and legacy Linux compatibility with a new tunable. This facilitates replication and migration of pools between hosts with different compatibility needs. The tunable controls whether or not to prefix the namespace to the name. If the xattr is already present with the alternate prefix, remove it so only the new version persists. By default the platform's existing convention is used. Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #11919
2022-02-16 03:35:30 +03:00
XATTR_COMPAT xattr_compat zfs_xattr_compat
Enable zpool events tunables and tests on FreeBSD We have have made the necessary changes in our module code to expose zevents through both devd and the zpool events ioctl. Now the tunables can be exposed and zpool events tests can be enabled on both platforms. A few minor tweaks to the tests were needed to accommodate the way wc formats output on FreeBSD. zed remains to be ported. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10008
2020-02-18 22:22:56 +03:00
ZEVENT_LEN_MAX zevent.len_max zfs_zevent_len_max
Avoid posting duplicate zpool events Duplicate io and checksum ereport events can misrepresent that things are worse than they seem. Ideally the zpool events and the corresponding vdev stat error counts in a zpool status should be for unique errors -- not the same error being counted over and over. This can be demonstrated in a simple example. With a single bad block in a datafile and just 5 reads of the file we end up with a degraded vdev, even though there is only one unique error in the pool. The proposed solution to the above issue, is to eliminate duplicates when posting events and when updating vdev error stats. We now save recent error events of interest when posting events so that we can easily check for duplicates when posting an error. Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@delphix.com> Closes #10861
2020-09-04 20:34:28 +03:00
ZEVENT_RETAIN_MAX zevent.retain_max zfs_zevent_retain_max
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
ZIO_SLOW_IO_MS zio.slow_io_ms zio_slow_io_ms
log xattr=sa create/remove/update to ZIL As such, there are no specific synchronous semantics defined for the xattrs. But for xattr=on, it does log to ZIL and zil_commit() is done, if sync=always is set on dataset. This provides sync semantics for xattr=on with sync=always set on dataset. For the xattr=sa implementation, it doesn't log to ZIL, so, even with sync=always, xattrs are not guaranteed to be synced before xattr call returns to caller. So, xattr can be lost if system crash happens, before txg carrying xattr transaction is synced. This change adds xattr=sa logging to ZIL on xattr create/remove/update and xattrs are synced to ZIL (zil_commit() done) for sync=always. This makes xattr=sa behavior similar to xattr=on. Implementation notes: The actual logging is fairly straight-forward and does not warrant additional explanation. However, it has been 14 years since we last added new TX types to the ZIL [1], hence this is the first time we do it after the introduction of zpool features. Therefore, here is an overview of the feature activation and deactivation workflow: 1. The feature must be enabled. Otherwise, we don't log the new record type. This ensures compatibility with older software. 2. The feature is activated per-dataset, since the ZIL is per-dataset. 3. If the feature is enabled and dataset is not for zvol, any append to the ZIL chain will activate the feature for the dataset. Likewise for starting a new ZIL chain. 4. A dataset that doesn't have a ZIL chain has the feature deactivated. We ensure (3) by activating on the first zil_commit() after the feature was enabled. Since activating the features requires waiting for txg sync, the first zil_commit() after enabling the feature will be slower than usual. The downside is that this is really a conservative approximation: even if we never append a 'TX_SETSAXATTR' to the ZIL chain, we pay the penalty for feature activation. The upside is that the user is in control of when we pay the penalty, i.e., upon enabling the feature. We ensure (4) by hooking into zil_sync(), where ZIL destroy actually happens. One more piece on feature activation, since it's spread across multiple functions: zil_commit() zil_process_commit_list() if lwb == NULL // first zil_commit since zil_open zil_create() if no log block pointer in ZIL header: if feature enabled and not active: // CASE 1 enable, COALESCE txg wait with dmu_tx that allocated the log block else // log block was allocated earlier than this zil_open if feature enabled and not active: // CASE 2 enable, EXPLICIT txg wait else // already have an in-DRAM LWB if feature enabled and not active: // this happens when we enable the feature after zil_create // CASE 3 enable, EXPLICIT txg wait [1] https://github.com/illumos/illumos-gate/commit/da6c28aaf62fa55f0fdb8004aa40f88f23bf53f0 Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com> Closes #8768 Closes #9078
2022-02-23 00:06:43 +03:00
ZIL_SAXATTR zil_saxattr zfs_zil_saxattr
ZTS: Catalog tunable names for tests in tunables.cfg Update tests to use the variables for tunable names. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9831
2020-01-15 01:57:28 +03:00
%%%%
while read name FreeBSD Linux; do
eval "export ${name}=\$${UNAME}"
done
Reference in New Issue Copy Permalink