mirror_zfs/module/zfs/vdev_indirect_mapping.c

617 lines
18 KiB
C
Raw Normal View History

OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
/*
* CDDL HEADER START
*
* This file and its contents are supplied under the terms of the
* Common Development and Distribution License ("CDDL"), version 1.0.
* You may only use this file in accordance with the terms of version
* 1.0 of the CDDL.
*
* A full copy of the text of the CDDL should have accompanied this
* source. A copy of the CDDL is also available via the Internet at
* http://www.illumos.org/license/CDDL.
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2015 by Delphix. All rights reserved.
*/
#include <sys/dmu_tx.h>
#include <sys/dsl_pool.h>
#include <sys/spa.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_indirect_mapping.h>
#include <sys/zfeature.h>
#include <sys/dmu_objset.h>
#ifdef ZFS_DEBUG
static boolean_t
vdev_indirect_mapping_verify(vdev_indirect_mapping_t *vim)
{
ASSERT(vim != NULL);
ASSERT(vim->vim_object != 0);
ASSERT(vim->vim_objset != NULL);
ASSERT(vim->vim_phys != NULL);
ASSERT(vim->vim_dbuf != NULL);
EQUIV(vim->vim_phys->vimp_num_entries > 0,
vim->vim_entries != NULL);
if (vim->vim_phys->vimp_num_entries > 0) {
ASSERTV(vdev_indirect_mapping_entry_phys_t *last_entry =
&vim->vim_entries[vim->vim_phys->vimp_num_entries - 1]);
ASSERTV(uint64_t offset =
DVA_MAPPING_GET_SRC_OFFSET(last_entry));
ASSERTV(uint64_t size = DVA_GET_ASIZE(&last_entry->vimep_dst));
ASSERT3U(vim->vim_phys->vimp_max_offset, >=, offset + size);
}
if (vim->vim_havecounts) {
ASSERT(vim->vim_phys->vimp_counts_object != 0);
}
return (B_TRUE);
}
#endif
uint64_t
vdev_indirect_mapping_num_entries(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
return (vim->vim_phys->vimp_num_entries);
}
uint64_t
vdev_indirect_mapping_max_offset(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
return (vim->vim_phys->vimp_max_offset);
}
uint64_t
vdev_indirect_mapping_object(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
return (vim->vim_object);
}
uint64_t
vdev_indirect_mapping_bytes_mapped(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
return (vim->vim_phys->vimp_bytes_mapped);
}
/*
* The length (in bytes) of the mapping object array in memory and
* (logically) on disk.
*
* Note that unlike most of our accessor functions,
* we don't assert that the struct is consistent; therefore it can be
* called while there may be concurrent changes, if we don't care about
* the value being immediately stale (e.g. from spa_removal_get_stats()).
*/
uint64_t
vdev_indirect_mapping_size(vdev_indirect_mapping_t *vim)
{
return (vim->vim_phys->vimp_num_entries * sizeof (*vim->vim_entries));
}
/*
* Compare an offset with an indirect mapping entry; there are three
* possible scenarios:
*
* 1. The offset is "less than" the mapping entry; meaning the
* offset is less than the source offset of the mapping entry. In
* this case, there is no overlap between the offset and the
* mapping entry and -1 will be returned.
*
* 2. The offset is "greater than" the mapping entry; meaning the
* offset is greater than the mapping entry's source offset plus
* the entry's size. In this case, there is no overlap between
* the offset and the mapping entry and 1 will be returned.
*
* NOTE: If the offset is actually equal to the entry's offset
* plus size, this is considered to be "greater" than the entry,
* and this case applies (i.e. 1 will be returned). Thus, the
* entry's "range" can be considered to be inclusive at its
* start, but exclusive at its end: e.g. [src, src + size).
*
* 3. The last case to consider is if the offset actually falls
* within the mapping entry's range. If this is the case, the
* offset is considered to be "equal to" the mapping entry and
* 0 will be returned.
*
* NOTE: If the offset is equal to the entry's source offset,
* this case applies and 0 will be returned. If the offset is
* equal to the entry's source plus its size, this case does
* *not* apply (see "NOTE" above for scenario 2), and 1 will be
* returned.
*/
static int
dva_mapping_overlap_compare(const void *v_key, const void *v_array_elem)
{
const uint64_t * const key = v_key;
const vdev_indirect_mapping_entry_phys_t * const array_elem =
v_array_elem;
uint64_t src_offset = DVA_MAPPING_GET_SRC_OFFSET(array_elem);
if (*key < src_offset) {
return (-1);
} else if (*key < src_offset + DVA_GET_ASIZE(&array_elem->vimep_dst)) {
return (0);
} else {
return (1);
}
}
/*
* Returns the mapping entry for the given offset.
*
* It's possible that the given offset will not be in the mapping table
* (i.e. no mapping entries contain this offset), in which case, the
* return value value depends on the "next_if_missing" parameter.
*
* If the offset is not found in the table and "next_if_missing" is
* B_FALSE, then NULL will always be returned. The behavior is intended
* to allow consumers to get the entry corresponding to the offset
* parameter, iff the offset overlaps with an entry in the table.
*
* If the offset is not found in the table and "next_if_missing" is
* B_TRUE, then the entry nearest to the given offset will be returned,
* such that the entry's source offset is greater than the offset
* passed in (i.e. the "next" mapping entry in the table is returned, if
* the offset is missing from the table). If there are no entries whose
* source offset is greater than the passed in offset, NULL is returned.
*/
static vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_entry_for_offset_impl(vdev_indirect_mapping_t *vim,
uint64_t offset, boolean_t next_if_missing)
{
ASSERT(vdev_indirect_mapping_verify(vim));
ASSERT(vim->vim_phys->vimp_num_entries > 0);
vdev_indirect_mapping_entry_phys_t *entry = NULL;
uint64_t last = vim->vim_phys->vimp_num_entries - 1;
uint64_t base = 0;
/*
* We don't define these inside of the while loop because we use
* their value in the case that offset isn't in the mapping.
*/
uint64_t mid;
int result;
while (last >= base) {
mid = base + ((last - base) >> 1);
result = dva_mapping_overlap_compare(&offset,
&vim->vim_entries[mid]);
if (result == 0) {
entry = &vim->vim_entries[mid];
break;
} else if (result < 0) {
last = mid - 1;
} else {
base = mid + 1;
}
}
if (entry == NULL && next_if_missing) {
ASSERT3U(base, ==, last + 1);
ASSERT(mid == base || mid == last);
ASSERT3S(result, !=, 0);
/*
* The offset we're looking for isn't actually contained
* in the mapping table, thus we need to return the
* closest mapping entry that is greater than the
* offset. We reuse the result of the last comparison,
* comparing the mapping entry at index "mid" and the
* offset. The offset is guaranteed to lie between
* indices one less than "mid", and one greater than
* "mid"; we just need to determine if offset is greater
* than, or less than the mapping entry contained at
* index "mid".
*/
uint64_t index;
if (result < 0)
index = mid;
else
index = mid + 1;
ASSERT3U(index, <=, vim->vim_phys->vimp_num_entries);
if (index == vim->vim_phys->vimp_num_entries) {
/*
* If "index" is past the end of the entries
* array, then not only is the offset not in the
* mapping table, but it's actually greater than
* all entries in the table. In this case, we
* can't return a mapping entry greater than the
* offset (since none exist), so we return NULL.
*/
ASSERT3S(dva_mapping_overlap_compare(&offset,
&vim->vim_entries[index - 1]), >, 0);
return (NULL);
} else {
/*
* Just to be safe, we verify the offset falls
* in between the mapping entries at index and
* one less than index. Since we know the offset
* doesn't overlap an entry, and we're supposed
* to return the entry just greater than the
* offset, both of the following tests must be
* true.
*/
ASSERT3S(dva_mapping_overlap_compare(&offset,
&vim->vim_entries[index]), <, 0);
IMPLY(index >= 1, dva_mapping_overlap_compare(&offset,
&vim->vim_entries[index - 1]) > 0);
return (&vim->vim_entries[index]);
}
} else {
return (entry);
}
}
vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_entry_for_offset(vdev_indirect_mapping_t *vim,
uint64_t offset)
{
return (vdev_indirect_mapping_entry_for_offset_impl(vim, offset,
B_FALSE));
}
vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_entry_for_offset_or_next(vdev_indirect_mapping_t *vim,
uint64_t offset)
{
return (vdev_indirect_mapping_entry_for_offset_impl(vim, offset,
B_TRUE));
}
void
vdev_indirect_mapping_close(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
if (vim->vim_phys->vimp_num_entries > 0) {
uint64_t map_size = vdev_indirect_mapping_size(vim);
vmem_free(vim->vim_entries, map_size);
vim->vim_entries = NULL;
}
dmu_buf_rele(vim->vim_dbuf, vim);
vim->vim_objset = NULL;
vim->vim_object = 0;
vim->vim_dbuf = NULL;
vim->vim_phys = NULL;
kmem_free(vim, sizeof (*vim));
}
uint64_t
vdev_indirect_mapping_alloc(objset_t *os, dmu_tx_t *tx)
{
uint64_t object;
ASSERT(dmu_tx_is_syncing(tx));
uint64_t bonus_size = VDEV_INDIRECT_MAPPING_SIZE_V0;
if (spa_feature_is_enabled(os->os_spa, SPA_FEATURE_OBSOLETE_COUNTS)) {
bonus_size = sizeof (vdev_indirect_mapping_phys_t);
}
object = dmu_object_alloc(os,
DMU_OTN_UINT64_METADATA, SPA_OLD_MAXBLOCKSIZE,
DMU_OTN_UINT64_METADATA, bonus_size,
tx);
if (spa_feature_is_enabled(os->os_spa, SPA_FEATURE_OBSOLETE_COUNTS)) {
dmu_buf_t *dbuf;
vdev_indirect_mapping_phys_t *vimp;
VERIFY0(dmu_bonus_hold(os, object, FTAG, &dbuf));
dmu_buf_will_dirty(dbuf, tx);
vimp = dbuf->db_data;
vimp->vimp_counts_object = dmu_object_alloc(os,
DMU_OTN_UINT32_METADATA, SPA_OLD_MAXBLOCKSIZE,
DMU_OT_NONE, 0, tx);
spa_feature_incr(os->os_spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
dmu_buf_rele(dbuf, FTAG);
}
return (object);
}
vdev_indirect_mapping_t *
vdev_indirect_mapping_open(objset_t *os, uint64_t mapping_object)
{
vdev_indirect_mapping_t *vim = kmem_zalloc(sizeof (*vim), KM_SLEEP);
dmu_object_info_t doi;
VERIFY0(dmu_object_info(os, mapping_object, &doi));
vim->vim_objset = os;
vim->vim_object = mapping_object;
VERIFY0(dmu_bonus_hold(os, vim->vim_object, vim,
&vim->vim_dbuf));
vim->vim_phys = vim->vim_dbuf->db_data;
vim->vim_havecounts =
(doi.doi_bonus_size > VDEV_INDIRECT_MAPPING_SIZE_V0);
if (vim->vim_phys->vimp_num_entries > 0) {
uint64_t map_size = vdev_indirect_mapping_size(vim);
vim->vim_entries = vmem_alloc(map_size, KM_SLEEP);
VERIFY0(dmu_read(os, vim->vim_object, 0, map_size,
vim->vim_entries, DMU_READ_PREFETCH));
}
ASSERT(vdev_indirect_mapping_verify(vim));
return (vim);
}
void
vdev_indirect_mapping_free(objset_t *os, uint64_t object, dmu_tx_t *tx)
{
vdev_indirect_mapping_t *vim = vdev_indirect_mapping_open(os, object);
if (vim->vim_havecounts) {
VERIFY0(dmu_object_free(os, vim->vim_phys->vimp_counts_object,
tx));
spa_feature_decr(os->os_spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
}
vdev_indirect_mapping_close(vim);
VERIFY0(dmu_object_free(os, object, tx));
}
/*
* Append the list of vdev_indirect_mapping_entry_t's to the on-disk
* mapping object. Also remove the entries from the list and free them.
* This also implicitly extends the max_offset of the mapping (to the end
* of the last entry).
*/
void
vdev_indirect_mapping_add_entries(vdev_indirect_mapping_t *vim,
list_t *list, dmu_tx_t *tx)
{
vdev_indirect_mapping_entry_phys_t *mapbuf;
uint64_t old_size;
uint32_t *countbuf = NULL;
vdev_indirect_mapping_entry_phys_t *old_entries;
uint64_t old_count;
uint64_t entries_written = 0;
ASSERT(vdev_indirect_mapping_verify(vim));
ASSERT(dmu_tx_is_syncing(tx));
ASSERT(dsl_pool_sync_context(dmu_tx_pool(tx)));
ASSERT(!list_is_empty(list));
old_size = vdev_indirect_mapping_size(vim);
old_entries = vim->vim_entries;
old_count = vim->vim_phys->vimp_num_entries;
dmu_buf_will_dirty(vim->vim_dbuf, tx);
mapbuf = vmem_alloc(SPA_OLD_MAXBLOCKSIZE, KM_SLEEP);
if (vim->vim_havecounts) {
countbuf = vmem_alloc(SPA_OLD_MAXBLOCKSIZE, KM_SLEEP);
ASSERT(spa_feature_is_active(vim->vim_objset->os_spa,
SPA_FEATURE_OBSOLETE_COUNTS));
}
while (!list_is_empty(list)) {
uint64_t i;
/*
* Write entries from the list to the
* vdev_im_object in batches of size SPA_OLD_MAXBLOCKSIZE.
*/
for (i = 0; i < SPA_OLD_MAXBLOCKSIZE / sizeof (*mapbuf); i++) {
vdev_indirect_mapping_entry_t *entry =
list_remove_head(list);
if (entry == NULL)
break;
uint64_t size =
DVA_GET_ASIZE(&entry->vime_mapping.vimep_dst);
uint64_t src_offset =
DVA_MAPPING_GET_SRC_OFFSET(&entry->vime_mapping);
/*
* We shouldn't be adding an entry which is fully
* obsolete.
*/
ASSERT3U(entry->vime_obsolete_count, <, size);
IMPLY(entry->vime_obsolete_count != 0,
vim->vim_havecounts);
mapbuf[i] = entry->vime_mapping;
if (vim->vim_havecounts)
countbuf[i] = entry->vime_obsolete_count;
vim->vim_phys->vimp_bytes_mapped += size;
ASSERT3U(src_offset, >=,
vim->vim_phys->vimp_max_offset);
vim->vim_phys->vimp_max_offset = src_offset + size;
entries_written++;
vmem_free(entry, sizeof (*entry));
}
dmu_write(vim->vim_objset, vim->vim_object,
vim->vim_phys->vimp_num_entries * sizeof (*mapbuf),
i * sizeof (*mapbuf),
mapbuf, tx);
if (vim->vim_havecounts) {
dmu_write(vim->vim_objset,
vim->vim_phys->vimp_counts_object,
vim->vim_phys->vimp_num_entries *
sizeof (*countbuf),
i * sizeof (*countbuf), countbuf, tx);
}
vim->vim_phys->vimp_num_entries += i;
}
vmem_free(mapbuf, SPA_OLD_MAXBLOCKSIZE);
if (vim->vim_havecounts)
vmem_free(countbuf, SPA_OLD_MAXBLOCKSIZE);
/*
* Update the entry array to reflect the new entries. First, copy
* over any old entries then read back the new entries we just wrote.
*/
uint64_t new_size = vdev_indirect_mapping_size(vim);
ASSERT3U(new_size, >, old_size);
ASSERT3U(new_size - old_size, ==,
entries_written * sizeof (vdev_indirect_mapping_entry_phys_t));
vim->vim_entries = vmem_alloc(new_size, KM_SLEEP);
if (old_size > 0) {
bcopy(old_entries, vim->vim_entries, old_size);
vmem_free(old_entries, old_size);
}
VERIFY0(dmu_read(vim->vim_objset, vim->vim_object, old_size,
new_size - old_size, &vim->vim_entries[old_count],
DMU_READ_PREFETCH));
zfs_dbgmsg("txg %llu: wrote %llu entries to "
"indirect mapping obj %llu; max offset=0x%llx",
(u_longlong_t)dmu_tx_get_txg(tx),
(u_longlong_t)entries_written,
(u_longlong_t)vim->vim_object,
(u_longlong_t)vim->vim_phys->vimp_max_offset);
}
/*
* Increment the relevant counts for the specified offset and length.
* The counts array must be obtained from
* vdev_indirect_mapping_load_obsolete_counts().
*/
void
vdev_indirect_mapping_increment_obsolete_count(vdev_indirect_mapping_t *vim,
uint64_t offset, uint64_t length, uint32_t *counts)
{
vdev_indirect_mapping_entry_phys_t *mapping;
uint64_t index;
mapping = vdev_indirect_mapping_entry_for_offset(vim, offset);
ASSERT(length > 0);
ASSERT3P(mapping, !=, NULL);
index = mapping - vim->vim_entries;
while (length > 0) {
ASSERT3U(index, <, vdev_indirect_mapping_num_entries(vim));
uint64_t size = DVA_GET_ASIZE(&mapping->vimep_dst);
uint64_t inner_offset = offset -
DVA_MAPPING_GET_SRC_OFFSET(mapping);
VERIFY3U(inner_offset, <, size);
uint64_t inner_size = MIN(length, size - inner_offset);
VERIFY3U(counts[index] + inner_size, <=, size);
counts[index] += inner_size;
offset += inner_size;
length -= inner_size;
mapping++;
index++;
}
}
typedef struct load_obsolete_space_map_arg {
vdev_indirect_mapping_t *losma_vim;
uint32_t *losma_counts;
} load_obsolete_space_map_arg_t;
static int
load_obsolete_sm_callback(maptype_t type, uint64_t offset, uint64_t size,
void *arg)
{
load_obsolete_space_map_arg_t *losma = arg;
ASSERT3S(type, ==, SM_ALLOC);
vdev_indirect_mapping_increment_obsolete_count(losma->losma_vim,
offset, size, losma->losma_counts);
return (0);
}
/*
* Modify the counts (increment them) based on the spacemap.
*/
void
vdev_indirect_mapping_load_obsolete_spacemap(vdev_indirect_mapping_t *vim,
uint32_t *counts, space_map_t *obsolete_space_sm)
{
load_obsolete_space_map_arg_t losma;
losma.losma_counts = counts;
losma.losma_vim = vim;
VERIFY0(space_map_iterate(obsolete_space_sm,
load_obsolete_sm_callback, &losma));
}
/*
* Read the obsolete counts from disk, returning them in an array.
*/
uint32_t *
vdev_indirect_mapping_load_obsolete_counts(vdev_indirect_mapping_t *vim)
{
ASSERT(vdev_indirect_mapping_verify(vim));
uint64_t counts_size =
vim->vim_phys->vimp_num_entries * sizeof (uint32_t);
uint32_t *counts = vmem_alloc(counts_size, KM_SLEEP);
if (vim->vim_havecounts) {
VERIFY0(dmu_read(vim->vim_objset,
vim->vim_phys->vimp_counts_object,
0, counts_size,
counts, DMU_READ_PREFETCH));
} else {
bzero(counts, counts_size);
}
return (counts);
}
extern void
vdev_indirect_mapping_free_obsolete_counts(vdev_indirect_mapping_t *vim,
uint32_t *counts)
{
ASSERT(vdev_indirect_mapping_verify(vim));
vmem_free(counts, vim->vim_phys->vimp_num_entries * sizeof (uint32_t));
}
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(vdev_indirect_mapping_add_entries);
EXPORT_SYMBOL(vdev_indirect_mapping_alloc);
EXPORT_SYMBOL(vdev_indirect_mapping_bytes_mapped);
EXPORT_SYMBOL(vdev_indirect_mapping_close);
EXPORT_SYMBOL(vdev_indirect_mapping_entry_for_offset);
EXPORT_SYMBOL(vdev_indirect_mapping_entry_for_offset_or_next);
EXPORT_SYMBOL(vdev_indirect_mapping_free);
EXPORT_SYMBOL(vdev_indirect_mapping_free_obsolete_counts);
EXPORT_SYMBOL(vdev_indirect_mapping_increment_obsolete_count);
EXPORT_SYMBOL(vdev_indirect_mapping_load_obsolete_counts);
EXPORT_SYMBOL(vdev_indirect_mapping_load_obsolete_spacemap);
EXPORT_SYMBOL(vdev_indirect_mapping_max_offset);
EXPORT_SYMBOL(vdev_indirect_mapping_num_entries);
EXPORT_SYMBOL(vdev_indirect_mapping_object);
EXPORT_SYMBOL(vdev_indirect_mapping_open);
EXPORT_SYMBOL(vdev_indirect_mapping_size);
#endif