mirror_zfs/module/os/linux/spl/spl-thread.c

205 lines
5.2 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*
* Solaris Porting Layer (SPL) Thread Implementation.
*/
#include <sys/thread.h>
#include <sys/kmem.h>
Add Thread Specific Data (TSD) Implementation Thread specific data has implemented using a hash table, this avoids the need to add a member to the task structure and allows maximum portability between kernels. This implementation has been optimized to keep the tsd_set() and tsd_get() times as small as possible. The majority of the entries in the hash table are for specific tsd entries. These entries are hashed by the product of their key and pid because by design the key and pid are guaranteed to be unique. Their product also has the desirable properly that it will be uniformly distributed over the hash bins providing neither the pid nor key is zero. Under linux the zero pid is always the init process and thus won't be used, and this implementation is careful to never to assign a zero key. By default the hash table is sized to 512 bins which is expected to be sufficient for light to moderate usage of thread specific data. The hash table contains two additional type of entries. They first type is entry is called a 'key' entry and it is added to the hash during tsd_create(). It is used to store the address of the destructor function and it is used as an anchor point. All tsd entries which use the same key will be linked to this entry. This is used during tsd_destory() to quickly call the destructor function for all tsd associated with the key. The 'key' entry may be looked up with tsd_hash_search() by passing the key you wish to lookup and DTOR_PID constant as the pid. The second type of entry is called a 'pid' entry and it is added to the hash the first time a process set a key. The 'pid' entry is also used as an anchor and all tsd for the process will be linked to it. This list is using during tsd_exit() to ensure all registered destructors are run for the process. The 'pid' entry may be looked up with tsd_hash_search() by passing the PID_KEY constant as the key, and the process pid. Note that tsd_exit() is called by thread_exit() so if your using the Solaris thread API you should not need to call tsd_exit() directly.
2010-11-30 20:51:46 +03:00
#include <sys/tsd.h>
#include <sys/string.h>
/*
* Thread interfaces
*/
typedef struct thread_priv_s {
unsigned long tp_magic; /* Magic */
int tp_name_size; /* Name size */
char *tp_name; /* Name (without _thread suffix) */
void (*tp_func)(void *); /* Registered function */
void *tp_args; /* Args to be passed to function */
size_t tp_len; /* Len to be passed to function */
int tp_state; /* State to start thread at */
pri_t tp_pri; /* Priority to start threat at */
} thread_priv_t;
static int
thread_generic_wrapper(void *arg)
{
thread_priv_t *tp = (thread_priv_t *)arg;
void (*func)(void *);
void *args;
ASSERT(tp->tp_magic == TP_MAGIC);
func = tp->tp_func;
args = tp->tp_args;
set_current_state(tp->tp_state);
set_user_nice((kthread_t *)current, PRIO_TO_NICE(tp->tp_pri));
kmem_free(tp->tp_name, tp->tp_name_size);
kmem_free(tp, sizeof (thread_priv_t));
if (func)
func(args);
return (0);
}
/*
* thread_create() may block forever if it cannot create a thread or
* allocate memory. This is preferable to returning a NULL which Solaris
* style callers likely never check for... since it can't fail.
*/
kthread_t *
__thread_create(caddr_t stk, size_t stksize, thread_func_t func,
const char *name, void *args, size_t len, proc_t *pp, int state, pri_t pri)
{
thread_priv_t *tp;
struct task_struct *tsk;
char *p;
/* Option pp is simply ignored */
/* Variable stack size unsupported */
ASSERT(stk == NULL);
tp = kmem_alloc(sizeof (thread_priv_t), KM_PUSHPAGE);
if (tp == NULL)
return (NULL);
tp->tp_magic = TP_MAGIC;
tp->tp_name_size = strlen(name) + 1;
tp->tp_name = kmem_alloc(tp->tp_name_size, KM_PUSHPAGE);
if (tp->tp_name == NULL) {
kmem_free(tp, sizeof (thread_priv_t));
return (NULL);
}
Cleanup: Switch to strlcpy from strncpy Coverity found a bug in `zfs_secpolicy_create_clone()` where it is possible for us to pass an unterminated string when `zfs_get_parent()` returns an error. Upon inspection, it is clear that using `strlcpy()` would have avoided this issue. Looking at the codebase, there are a number of other uses of `strncpy()` that are unsafe and even when it is used safely, switching to `strlcpy()` would make the code more readable. Therefore, we switch all instances where we use `strncpy()` to use `strlcpy()`. Unfortunately, we do not portably have access to `strlcpy()` in tests/zfs-tests/cmd/zfs_diff-socket.c because it does not link to libspl. Modifying the appropriate Makefile.am to try to link to it resulted in an error from the naming choice used in the file. Trying to disable the check on the file did not work on FreeBSD because Clang ignores `#undef` when a definition is provided by `-Dstrncpy(...)=...`. We workaround that by explictly including the C file from libspl into the test. This makes things build correctly everywhere. We add a deprecation warning to `config/Rules.am` and suppress it on the remaining `strncpy()` usage. `strlcpy()` is not portably avaliable in tests/zfs-tests/cmd/zfs_diff-socket.c, so we use `snprintf()` there as a substitute. This patch does not tackle the related problem of `strcpy()`, which is even less safe. Thankfully, a quick inspection found that it is used far more correctly than strncpy() was used. A quick inspection did not find any problems with `strcpy()` usage outside of zhack, but it should be said that I only checked around 90% of them. Lastly, some of the fields in kstat_t varied in size by 1 depending on whether they were in userspace or in the kernel. The origin of this discrepancy appears to be 04a479f7066ccdaa23a6546955303b172f4a6909 where it was made for no apparent reason. It conflicts with the comment on KSTAT_STRLEN, so we shrink the kernel field sizes to match the userspace field sizes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13876
2022-09-28 02:35:29 +03:00
strlcpy(tp->tp_name, name, tp->tp_name_size);
/*
* Strip trailing "_thread" from passed name which will be the func
* name since the exposed API has no parameter for passing a name.
*/
p = strstr(tp->tp_name, "_thread");
if (p)
p[0] = '\0';
tp->tp_func = func;
tp->tp_args = args;
tp->tp_len = len;
tp->tp_state = state;
tp->tp_pri = pri;
tsk = spl_kthread_create(thread_generic_wrapper, (void *)tp,
"%s", tp->tp_name);
if (IS_ERR(tsk))
return (NULL);
wake_up_process(tsk);
return ((kthread_t *)tsk);
}
EXPORT_SYMBOL(__thread_create);
/*
* spl_kthread_create - Wrapper providing pre-3.13 semantics for
* kthread_create() in which it is not killable and less likely
* to return -ENOMEM.
*/
struct task_struct *
spl_kthread_create(int (*func)(void *), void *data, const char namefmt[], ...)
{
struct task_struct *tsk;
va_list args;
char name[TASK_COMM_LEN];
va_start(args, namefmt);
vsnprintf(name, sizeof (name), namefmt, args);
va_end(args);
do {
tsk = kthread_create(func, data, "%s", name);
if (IS_ERR(tsk)) {
if (signal_pending(current)) {
clear_thread_flag(TIF_SIGPENDING);
continue;
}
if (PTR_ERR(tsk) == -ENOMEM)
continue;
return (NULL);
} else {
return (tsk);
}
} while (1);
}
EXPORT_SYMBOL(spl_kthread_create);
/*
* Extract the next pending signal from p_sig into p_cursig; stop the process
* if a stop has been requested or if a traced signal is pending.
*/
int
issig(void)
{
if (!signal_pending(current))
return (0);
struct task_struct *task = current;
spl_kernel_siginfo_t __info;
sigset_t set;
siginitsetinv(&set, 1ULL << (SIGSTOP - 1) | 1ULL << (SIGTSTP - 1));
sigorsets(&set, &task->blocked, &set);
spin_lock_irq(&task->sighand->siglock);
#ifdef HAVE_DEQUEUE_SIGNAL_4ARG
enum pid_type __type;
Cleanup of dead code suggested by Clang Static Analyzer (#14380) I recently gained the ability to run Clang's static analyzer on the linux kernel modules via a few hacks. This extended coverage to code that was previously missed since Clang's static analyzer only looked at code that we built in userspace. Running it against the Linux kernel modules built from my local branch produced a total of 72 reports against my local branch. Of those, 50 were reports of logic errors and 22 were reports of dead code. Since we already had cleaned up all of the previous dead code reports, I felt it would be a good next step to clean up these dead code reports. Clang did a further breakdown of the dead code reports into: Dead assignment 15 Dead increment 2 Dead nested assignment 5 The benefit of cleaning these up, especially in the case of dead nested assignment, is that they can expose places where our error handling is incorrect. A number of them were fairly straight forward. However several were not: In vdev_disk_physio_completion(), not only were we not using the return value from the static function vdev_disk_dio_put(), but nothing used it, so I changed it to return void and removed the existing (void) cast in the other area where we call it in addition to no longer storing it to a stack value. In FSE_createDTable(), the function is dead code. Its helper function FSE_freeDTable() is also dead code, as are the CPP definitions in `module/zstd/include/zstd_compat_wrapper.h`. We just delete it all. In zfs_zevent_wait(), we have an optimization opportunity. cv_wait_sig() returns 0 if there are waiting signals and 1 if there are none. The Linux SPL version literally returns `signal_pending(current) ? 0 : 1)` and FreeBSD implements the same semantics, we can just do `!cv_wait_sig()` in place of `signal_pending(current)` to avoid unnecessarily calling it again. zfs_setattr() on FreeBSD version did not have error handling issue because the code was removed entirely from FreeBSD version. The error is from updating the attribute directory's files. After some thought, I decided to propapage errors on it to userspace. In zfs_secpolicy_tmp_snapshot(), we ignore a lack of permission from the first check in favor of checking three other permissions. I assume this is intentional. In zfs_create_fs(), the return value of zap_update() was not checked despite setting an important version number. I see no backward compatibility reason to permit failures, so we add an assertion to catch failures. Interestingly, Linux is still using ASSERT(error == 0) from OpenSolaris while FreeBSD has switched to the improved ASSERT0(error) from illumos, although illumos has yet to adopt it here. ASSERT(error == 0) was used on Linux while ASSERT0(error) was used on FreeBSD since the entire file needs conversion and that should be the subject of another patch. dnode_move()'s issue was caused by us not having implemented POINTER_IS_VALID() on Linux. We have a stub in `include/os/linux/spl/sys/kmem_cache.h` for it, when it really should be in `include/os/linux/spl/sys/kmem.h` to be consistent with Illumos/OpenSolaris. FreeBSD put both `POINTER_IS_VALID()` and `POINTER_INVALIDATE()` in `include/os/freebsd/spl/sys/kmem.h`, so we copy what it did. Whenever a report was in platform-specific code, I checked the FreeBSD version to see if it also applied to FreeBSD, but it was only relevant a few times. Lastly, the patch that enabled Clang's static analyzer to be run on the Linux kernel modules needs more work before it can be put into a PR. I plan to do that in the future as part of the on-going static analysis work that I am doing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #14380
2023-01-17 20:57:12 +03:00
if (dequeue_signal(task, &set, &__info, &__type) != 0) {
#else
Cleanup of dead code suggested by Clang Static Analyzer (#14380) I recently gained the ability to run Clang's static analyzer on the linux kernel modules via a few hacks. This extended coverage to code that was previously missed since Clang's static analyzer only looked at code that we built in userspace. Running it against the Linux kernel modules built from my local branch produced a total of 72 reports against my local branch. Of those, 50 were reports of logic errors and 22 were reports of dead code. Since we already had cleaned up all of the previous dead code reports, I felt it would be a good next step to clean up these dead code reports. Clang did a further breakdown of the dead code reports into: Dead assignment 15 Dead increment 2 Dead nested assignment 5 The benefit of cleaning these up, especially in the case of dead nested assignment, is that they can expose places where our error handling is incorrect. A number of them were fairly straight forward. However several were not: In vdev_disk_physio_completion(), not only were we not using the return value from the static function vdev_disk_dio_put(), but nothing used it, so I changed it to return void and removed the existing (void) cast in the other area where we call it in addition to no longer storing it to a stack value. In FSE_createDTable(), the function is dead code. Its helper function FSE_freeDTable() is also dead code, as are the CPP definitions in `module/zstd/include/zstd_compat_wrapper.h`. We just delete it all. In zfs_zevent_wait(), we have an optimization opportunity. cv_wait_sig() returns 0 if there are waiting signals and 1 if there are none. The Linux SPL version literally returns `signal_pending(current) ? 0 : 1)` and FreeBSD implements the same semantics, we can just do `!cv_wait_sig()` in place of `signal_pending(current)` to avoid unnecessarily calling it again. zfs_setattr() on FreeBSD version did not have error handling issue because the code was removed entirely from FreeBSD version. The error is from updating the attribute directory's files. After some thought, I decided to propapage errors on it to userspace. In zfs_secpolicy_tmp_snapshot(), we ignore a lack of permission from the first check in favor of checking three other permissions. I assume this is intentional. In zfs_create_fs(), the return value of zap_update() was not checked despite setting an important version number. I see no backward compatibility reason to permit failures, so we add an assertion to catch failures. Interestingly, Linux is still using ASSERT(error == 0) from OpenSolaris while FreeBSD has switched to the improved ASSERT0(error) from illumos, although illumos has yet to adopt it here. ASSERT(error == 0) was used on Linux while ASSERT0(error) was used on FreeBSD since the entire file needs conversion and that should be the subject of another patch. dnode_move()'s issue was caused by us not having implemented POINTER_IS_VALID() on Linux. We have a stub in `include/os/linux/spl/sys/kmem_cache.h` for it, when it really should be in `include/os/linux/spl/sys/kmem.h` to be consistent with Illumos/OpenSolaris. FreeBSD put both `POINTER_IS_VALID()` and `POINTER_INVALIDATE()` in `include/os/freebsd/spl/sys/kmem.h`, so we copy what it did. Whenever a report was in platform-specific code, I checked the FreeBSD version to see if it also applied to FreeBSD, but it was only relevant a few times. Lastly, the patch that enabled Clang's static analyzer to be run on the Linux kernel modules needs more work before it can be put into a PR. I plan to do that in the future as part of the on-going static analysis work that I am doing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #14380
2023-01-17 20:57:12 +03:00
if (dequeue_signal(task, &set, &__info) != 0) {
#endif
#ifdef HAVE_SIGNAL_STOP
spin_unlock_irq(&task->sighand->siglock);
kernel_signal_stop();
#else
if (current->jobctl & JOBCTL_STOP_DEQUEUED)
spl_set_special_state(TASK_STOPPED);
spin_unlock_irq(&current->sighand->siglock);
schedule();
#endif
/*
* Dequeued SIGSTOP/SIGTSTP.
* Check if process has other singal pending.
*/
if (signal_pending(current))
return (1);
return (0);
}
spin_unlock_irq(&task->sighand->siglock);
return (1);
}
EXPORT_SYMBOL(issig);