mirror_zfs/module/spl/spl-taskq.c

1283 lines
33 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
* For details, see <http://zfsonlinux.org/>.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*
* Solaris Porting Layer (SPL) Task Queue Implementation.
*/
#include <sys/taskq.h>
#include <sys/kmem.h>
#include <sys/tsd.h>
int spl_taskq_thread_bind = 0;
module_param(spl_taskq_thread_bind, int, 0644);
MODULE_PARM_DESC(spl_taskq_thread_bind, "Bind taskq thread to CPU by default");
int spl_taskq_thread_dynamic = 1;
module_param(spl_taskq_thread_dynamic, int, 0644);
MODULE_PARM_DESC(spl_taskq_thread_dynamic, "Allow dynamic taskq threads");
int spl_taskq_thread_priority = 1;
module_param(spl_taskq_thread_priority, int, 0644);
MODULE_PARM_DESC(spl_taskq_thread_priority,
"Allow non-default priority for taskq threads");
int spl_taskq_thread_sequential = 4;
module_param(spl_taskq_thread_sequential, int, 0644);
MODULE_PARM_DESC(spl_taskq_thread_sequential,
"Create new taskq threads after N sequential tasks");
2009-01-06 02:08:03 +03:00
/* Global system-wide dynamic task queue available for all consumers */
taskq_t *system_taskq;
EXPORT_SYMBOL(system_taskq);
/* Global dynamic task queue for long delay */
taskq_t *system_delay_taskq;
EXPORT_SYMBOL(system_delay_taskq);
2009-01-06 02:08:03 +03:00
/* Private dedicated taskq for creating new taskq threads on demand. */
static taskq_t *dynamic_taskq;
static taskq_thread_t *taskq_thread_create(taskq_t *);
/* List of all taskqs */
LIST_HEAD(tq_list);
DECLARE_RWSEM(tq_list_sem);
static uint_t taskq_tsd;
static int
task_km_flags(uint_t flags)
{
if (flags & TQ_NOSLEEP)
return (KM_NOSLEEP);
if (flags & TQ_PUSHPAGE)
return (KM_PUSHPAGE);
return (KM_SLEEP);
}
/*
* taskq_find_by_name - Find the largest instance number of a named taskq.
*/
static int
taskq_find_by_name(const char *name)
{
struct list_head *tql;
taskq_t *tq;
list_for_each_prev(tql, &tq_list) {
tq = list_entry(tql, taskq_t, tq_taskqs);
if (strcmp(name, tq->tq_name) == 0)
return tq->tq_instance;
}
return (-1);
}
/*
* NOTE: Must be called with tq->tq_lock held, returns a list_t which
* is not attached to the free, work, or pending taskq lists.
*/
static taskq_ent_t *
task_alloc(taskq_t *tq, uint_t flags, unsigned long *irqflags)
{
taskq_ent_t *t;
int count = 0;
ASSERT(tq);
ASSERT(spin_is_locked(&tq->tq_lock));
retry:
/* Acquire taskq_ent_t's from free list if available */
if (!list_empty(&tq->tq_free_list) && !(flags & TQ_NEW)) {
t = list_entry(tq->tq_free_list.next, taskq_ent_t, tqent_list);
ASSERT(!(t->tqent_flags & TQENT_FLAG_PREALLOC));
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
ASSERT(!(t->tqent_flags & TQENT_FLAG_CANCEL));
ASSERT(!timer_pending(&t->tqent_timer));
list_del_init(&t->tqent_list);
return (t);
}
/* Free list is empty and memory allocations are prohibited */
if (flags & TQ_NOALLOC)
return (NULL);
/* Hit maximum taskq_ent_t pool size */
if (tq->tq_nalloc >= tq->tq_maxalloc) {
if (flags & TQ_NOSLEEP)
return (NULL);
/*
* Sleep periodically polling the free list for an available
* taskq_ent_t. Dispatching with TQ_SLEEP should always succeed
* but we cannot block forever waiting for an taskq_ent_t to
* show up in the free list, otherwise a deadlock can happen.
*
* Therefore, we need to allocate a new task even if the number
* of allocated tasks is above tq->tq_maxalloc, but we still
* end up delaying the task allocation by one second, thereby
* throttling the task dispatch rate.
*/
spin_unlock_irqrestore(&tq->tq_lock, *irqflags);
schedule_timeout(HZ / 100);
spin_lock_irqsave_nested(&tq->tq_lock, *irqflags,
tq->tq_lock_class);
if (count < 100) {
count++;
goto retry;
}
}
spin_unlock_irqrestore(&tq->tq_lock, *irqflags);
t = kmem_alloc(sizeof (taskq_ent_t), task_km_flags(flags));
spin_lock_irqsave_nested(&tq->tq_lock, *irqflags, tq->tq_lock_class);
if (t) {
taskq_init_ent(t);
tq->tq_nalloc++;
}
return (t);
}
/*
* NOTE: Must be called with tq->tq_lock held, expects the taskq_ent_t
* to already be removed from the free, work, or pending taskq lists.
*/
static void
task_free(taskq_t *tq, taskq_ent_t *t)
{
ASSERT(tq);
ASSERT(t);
ASSERT(spin_is_locked(&tq->tq_lock));
ASSERT(list_empty(&t->tqent_list));
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
ASSERT(!timer_pending(&t->tqent_timer));
kmem_free(t, sizeof (taskq_ent_t));
tq->tq_nalloc--;
}
/*
* NOTE: Must be called with tq->tq_lock held, either destroys the
* taskq_ent_t if too many exist or moves it to the free list for later use.
*/
static void
task_done(taskq_t *tq, taskq_ent_t *t)
{
ASSERT(tq);
ASSERT(t);
ASSERT(spin_is_locked(&tq->tq_lock));
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
/* Wake tasks blocked in taskq_wait_id() */
wake_up_all(&t->tqent_waitq);
list_del_init(&t->tqent_list);
if (tq->tq_nalloc <= tq->tq_minalloc) {
t->tqent_id = TASKQID_INVALID;
t->tqent_func = NULL;
t->tqent_arg = NULL;
t->tqent_flags = 0;
list_add_tail(&t->tqent_list, &tq->tq_free_list);
} else {
task_free(tq, t);
}
}
/*
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
* When a delayed task timer expires remove it from the delay list and
* add it to the priority list in order for immediate processing.
*/
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
static void
task_expire(unsigned long data)
{
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
taskq_ent_t *w, *t = (taskq_ent_t *)data;
taskq_t *tq = t->tqent_taskq;
struct list_head *l;
unsigned long flags;
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
if (t->tqent_flags & TQENT_FLAG_CANCEL) {
ASSERT(list_empty(&t->tqent_list));
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
return;
}
t->tqent_birth = jiffies;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
/*
* The priority list must be maintained in strict task id order
* from lowest to highest for lowest_id to be easily calculable.
*/
list_del(&t->tqent_list);
list_for_each_prev(l, &tq->tq_prio_list) {
w = list_entry(l, taskq_ent_t, tqent_list);
if (w->tqent_id < t->tqent_id) {
list_add(&t->tqent_list, l);
break;
}
}
if (l == &tq->tq_prio_list)
list_add(&t->tqent_list, &tq->tq_prio_list);
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
wake_up(&tq->tq_work_waitq);
}
/*
* Returns the lowest incomplete taskqid_t. The taskqid_t may
* be queued on the pending list, on the priority list, on the
* delay list, or on the work list currently being handled, but
* it is not 100% complete yet.
*/
static taskqid_t
taskq_lowest_id(taskq_t *tq)
{
taskqid_t lowest_id = tq->tq_next_id;
taskq_ent_t *t;
taskq_thread_t *tqt;
ASSERT(tq);
ASSERT(spin_is_locked(&tq->tq_lock));
if (!list_empty(&tq->tq_pend_list)) {
t = list_entry(tq->tq_pend_list.next, taskq_ent_t, tqent_list);
lowest_id = MIN(lowest_id, t->tqent_id);
}
if (!list_empty(&tq->tq_prio_list)) {
t = list_entry(tq->tq_prio_list.next, taskq_ent_t, tqent_list);
lowest_id = MIN(lowest_id, t->tqent_id);
}
if (!list_empty(&tq->tq_delay_list)) {
t = list_entry(tq->tq_delay_list.next, taskq_ent_t, tqent_list);
lowest_id = MIN(lowest_id, t->tqent_id);
}
if (!list_empty(&tq->tq_active_list)) {
tqt = list_entry(tq->tq_active_list.next, taskq_thread_t,
tqt_active_list);
ASSERT(tqt->tqt_id != TASKQID_INVALID);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
lowest_id = MIN(lowest_id, tqt->tqt_id);
}
return (lowest_id);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
/*
* Insert a task into a list keeping the list sorted by increasing taskqid.
*/
static void
taskq_insert_in_order(taskq_t *tq, taskq_thread_t *tqt)
{
taskq_thread_t *w;
struct list_head *l;
ASSERT(tq);
ASSERT(tqt);
ASSERT(spin_is_locked(&tq->tq_lock));
list_for_each_prev(l, &tq->tq_active_list) {
w = list_entry(l, taskq_thread_t, tqt_active_list);
if (w->tqt_id < tqt->tqt_id) {
list_add(&tqt->tqt_active_list, l);
break;
}
}
if (l == &tq->tq_active_list)
list_add(&tqt->tqt_active_list, &tq->tq_active_list);
}
/*
* Find and return a task from the given list if it exists. The list
* must be in lowest to highest task id order.
*/
static taskq_ent_t *
taskq_find_list(taskq_t *tq, struct list_head *lh, taskqid_t id)
{
struct list_head *l;
taskq_ent_t *t;
ASSERT(spin_is_locked(&tq->tq_lock));
list_for_each(l, lh) {
t = list_entry(l, taskq_ent_t, tqent_list);
if (t->tqent_id == id)
return (t);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
if (t->tqent_id > id)
break;
}
return (NULL);
}
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
/*
* Find an already dispatched task given the task id regardless of what
* state it is in. If a task is still pending or executing it will be
* returned and 'active' set appropriately. If the task has already
* been run then NULL is returned.
*/
static taskq_ent_t *
taskq_find(taskq_t *tq, taskqid_t id, int *active)
{
taskq_thread_t *tqt;
struct list_head *l;
taskq_ent_t *t;
ASSERT(spin_is_locked(&tq->tq_lock));
*active = 0;
t = taskq_find_list(tq, &tq->tq_delay_list, id);
if (t)
return (t);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t = taskq_find_list(tq, &tq->tq_prio_list, id);
if (t)
return (t);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t = taskq_find_list(tq, &tq->tq_pend_list, id);
if (t)
return (t);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
list_for_each(l, &tq->tq_active_list) {
tqt = list_entry(l, taskq_thread_t, tqt_active_list);
if (tqt->tqt_id == id) {
t = tqt->tqt_task;
*active = 1;
return (t);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
}
return (NULL);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
/*
* Theory for the taskq_wait_id(), taskq_wait_outstanding(), and
* taskq_wait() functions below.
*
* Taskq waiting is accomplished by tracking the lowest outstanding task
* id and the next available task id. As tasks are dispatched they are
* added to the tail of the pending, priority, or delay lists. As worker
* threads become available the tasks are removed from the heads of these
* lists and linked to the worker threads. This ensures the lists are
* kept sorted by lowest to highest task id.
*
* Therefore the lowest outstanding task id can be quickly determined by
* checking the head item from all of these lists. This value is stored
* with the taskq as the lowest id. It only needs to be recalculated when
* either the task with the current lowest id completes or is canceled.
*
* By blocking until the lowest task id exceeds the passed task id the
* taskq_wait_outstanding() function can be easily implemented. Similarly,
* by blocking until the lowest task id matches the next task id taskq_wait()
* can be implemented.
*
* Callers should be aware that when there are multiple worked threads it
* is possible for larger task ids to complete before smaller ones. Also
* when the taskq contains delay tasks with small task ids callers may
* block for a considerable length of time waiting for them to expire and
* execute.
*/
static int
taskq_wait_id_check(taskq_t *tq, taskqid_t id)
{
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
int active = 0;
int rc;
unsigned long flags;
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
rc = (taskq_find(tq, id, &active) == NULL);
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
return (rc);
}
/*
* The taskq_wait_id() function blocks until the passed task id completes.
* This does not guarantee that all lower task ids have completed.
*/
void
taskq_wait_id(taskq_t *tq, taskqid_t id)
{
wait_event(tq->tq_wait_waitq, taskq_wait_id_check(tq, id));
}
EXPORT_SYMBOL(taskq_wait_id);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
static int
taskq_wait_outstanding_check(taskq_t *tq, taskqid_t id)
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
{
int rc;
unsigned long flags;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
rc = (id < tq->tq_lowest_id);
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
return (rc);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
/*
* The taskq_wait_outstanding() function will block until all tasks with a
* lower taskqid than the passed 'id' have been completed. Note that all
* task id's are assigned monotonically at dispatch time. Zero may be
* passed for the id to indicate all tasks dispatch up to this point,
* but not after, should be waited for.
*/
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
void
taskq_wait_outstanding(taskq_t *tq, taskqid_t id)
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
{
id = id ? id : tq->tq_next_id - 1;
wait_event(tq->tq_wait_waitq, taskq_wait_outstanding_check(tq, id));
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
EXPORT_SYMBOL(taskq_wait_outstanding);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
static int
taskq_wait_check(taskq_t *tq)
{
int rc;
unsigned long flags;
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
rc = (tq->tq_lowest_id == tq->tq_next_id);
spin_unlock_irqrestore(&tq->tq_lock, flags);
return (rc);
}
/*
* The taskq_wait() function will block until the taskq is empty.
* This means that if a taskq re-dispatches work to itself taskq_wait()
* callers will block indefinitely.
*/
void
taskq_wait(taskq_t *tq)
{
wait_event(tq->tq_wait_waitq, taskq_wait_check(tq));
}
EXPORT_SYMBOL(taskq_wait);
int
taskq_member(taskq_t *tq, kthread_t *t)
{
return (tq == (taskq_t *)tsd_get_by_thread(taskq_tsd, t));
}
EXPORT_SYMBOL(taskq_member);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
/*
* Cancel an already dispatched task given the task id. Still pending tasks
* will be immediately canceled, and if the task is active the function will
* block until it completes. Preallocated tasks which are canceled must be
* freed by the caller.
*/
int
taskq_cancel_id(taskq_t *tq, taskqid_t id)
{
taskq_ent_t *t;
int active = 0;
int rc = ENOENT;
unsigned long flags;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
ASSERT(tq);
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t = taskq_find(tq, id, &active);
if (t && !active) {
list_del_init(&t->tqent_list);
t->tqent_flags |= TQENT_FLAG_CANCEL;
/*
* When canceling the lowest outstanding task id we
* must recalculate the new lowest outstanding id.
*/
if (tq->tq_lowest_id == t->tqent_id) {
tq->tq_lowest_id = taskq_lowest_id(tq);
ASSERT3S(tq->tq_lowest_id, >, t->tqent_id);
}
/*
* The task_expire() function takes the tq->tq_lock so drop
* drop the lock before synchronously cancelling the timer.
*/
if (timer_pending(&t->tqent_timer)) {
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
del_timer_sync(&t->tqent_timer);
spin_lock_irqsave_nested(&tq->tq_lock, flags,
tq->tq_lock_class);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
if (!(t->tqent_flags & TQENT_FLAG_PREALLOC))
task_done(tq, t);
rc = 0;
}
spin_unlock_irqrestore(&tq->tq_lock, flags);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
if (active) {
taskq_wait_id(tq, id);
rc = EBUSY;
}
return (rc);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
EXPORT_SYMBOL(taskq_cancel_id);
static int taskq_thread_spawn(taskq_t *tq);
taskqid_t
taskq_dispatch(taskq_t *tq, task_func_t func, void *arg, uint_t flags)
{
taskq_ent_t *t;
taskqid_t rc = TASKQID_INVALID;
unsigned long irqflags;
ASSERT(tq);
ASSERT(func);
spin_lock_irqsave_nested(&tq->tq_lock, irqflags, tq->tq_lock_class);
/* Taskq being destroyed and all tasks drained */
if (!(tq->tq_flags & TASKQ_ACTIVE))
goto out;
/* Do not queue the task unless there is idle thread for it */
ASSERT(tq->tq_nactive <= tq->tq_nthreads);
if ((flags & TQ_NOQUEUE) && (tq->tq_nactive == tq->tq_nthreads)) {
/* Dynamic taskq may be able to spawn another thread */
if (!(tq->tq_flags & TASKQ_DYNAMIC) || taskq_thread_spawn(tq) == 0)
goto out;
}
if ((t = task_alloc(tq, flags, &irqflags)) == NULL)
goto out;
spin_lock(&t->tqent_lock);
/* Queue to the front of the list to enforce TQ_NOQUEUE semantics */
if (flags & TQ_NOQUEUE)
list_add(&t->tqent_list, &tq->tq_prio_list);
/* Queue to the priority list instead of the pending list */
else if (flags & TQ_FRONT)
list_add_tail(&t->tqent_list, &tq->tq_prio_list);
else
list_add_tail(&t->tqent_list, &tq->tq_pend_list);
t->tqent_id = rc = tq->tq_next_id;
tq->tq_next_id++;
t->tqent_func = func;
t->tqent_arg = arg;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t->tqent_taskq = tq;
t->tqent_timer.data = 0;
t->tqent_timer.function = NULL;
t->tqent_timer.expires = 0;
t->tqent_birth = jiffies;
ASSERT(!(t->tqent_flags & TQENT_FLAG_PREALLOC));
spin_unlock(&t->tqent_lock);
wake_up(&tq->tq_work_waitq);
out:
/* Spawn additional taskq threads if required. */
if (!(flags & TQ_NOQUEUE) && tq->tq_nactive == tq->tq_nthreads)
(void) taskq_thread_spawn(tq);
spin_unlock_irqrestore(&tq->tq_lock, irqflags);
return (rc);
}
EXPORT_SYMBOL(taskq_dispatch);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
taskqid_t
taskq_dispatch_delay(taskq_t *tq, task_func_t func, void *arg,
uint_t flags, clock_t expire_time)
{
taskqid_t rc = TASKQID_INVALID;
taskq_ent_t *t;
unsigned long irqflags;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
ASSERT(tq);
ASSERT(func);
spin_lock_irqsave_nested(&tq->tq_lock, irqflags, tq->tq_lock_class);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
/* Taskq being destroyed and all tasks drained */
if (!(tq->tq_flags & TASKQ_ACTIVE))
goto out;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
if ((t = task_alloc(tq, flags, &irqflags)) == NULL)
goto out;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
spin_lock(&t->tqent_lock);
/* Queue to the delay list for subsequent execution */
list_add_tail(&t->tqent_list, &tq->tq_delay_list);
t->tqent_id = rc = tq->tq_next_id;
tq->tq_next_id++;
t->tqent_func = func;
t->tqent_arg = arg;
t->tqent_taskq = tq;
t->tqent_timer.data = (unsigned long)t;
t->tqent_timer.function = task_expire;
t->tqent_timer.expires = (unsigned long)expire_time;
add_timer(&t->tqent_timer);
ASSERT(!(t->tqent_flags & TQENT_FLAG_PREALLOC));
spin_unlock(&t->tqent_lock);
out:
/* Spawn additional taskq threads if required. */
if (tq->tq_nactive == tq->tq_nthreads)
(void) taskq_thread_spawn(tq);
spin_unlock_irqrestore(&tq->tq_lock, irqflags);
return (rc);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
}
EXPORT_SYMBOL(taskq_dispatch_delay);
void
taskq_dispatch_ent(taskq_t *tq, task_func_t func, void *arg, uint_t flags,
taskq_ent_t *t)
{
unsigned long irqflags;
ASSERT(tq);
ASSERT(func);
spin_lock_irqsave_nested(&tq->tq_lock, irqflags,
tq->tq_lock_class);
/* Taskq being destroyed and all tasks drained */
if (!(tq->tq_flags & TASKQ_ACTIVE)) {
t->tqent_id = TASKQID_INVALID;
goto out;
}
if ((flags & TQ_NOQUEUE) && (tq->tq_nactive == tq->tq_nthreads)) {
/* Dynamic taskq may be able to spawn another thread */
if (!(tq->tq_flags & TASKQ_DYNAMIC) || taskq_thread_spawn(tq) == 0)
goto out2;
flags |= TQ_FRONT;
}
spin_lock(&t->tqent_lock);
/*
* Mark it as a prealloc'd task. This is important
* to ensure that we don't free it later.
*/
t->tqent_flags |= TQENT_FLAG_PREALLOC;
/* Queue to the priority list instead of the pending list */
if (flags & TQ_FRONT)
list_add_tail(&t->tqent_list, &tq->tq_prio_list);
else
list_add_tail(&t->tqent_list, &tq->tq_pend_list);
t->tqent_id = tq->tq_next_id;
tq->tq_next_id++;
t->tqent_func = func;
t->tqent_arg = arg;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t->tqent_taskq = tq;
t->tqent_birth = jiffies;
spin_unlock(&t->tqent_lock);
wake_up(&tq->tq_work_waitq);
out:
/* Spawn additional taskq threads if required. */
if (tq->tq_nactive == tq->tq_nthreads)
(void) taskq_thread_spawn(tq);
out2:
spin_unlock_irqrestore(&tq->tq_lock, irqflags);
}
EXPORT_SYMBOL(taskq_dispatch_ent);
int
taskq_empty_ent(taskq_ent_t *t)
{
return (list_empty(&t->tqent_list));
}
EXPORT_SYMBOL(taskq_empty_ent);
void
taskq_init_ent(taskq_ent_t *t)
{
spin_lock_init(&t->tqent_lock);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
init_waitqueue_head(&t->tqent_waitq);
init_timer(&t->tqent_timer);
INIT_LIST_HEAD(&t->tqent_list);
t->tqent_id = 0;
t->tqent_func = NULL;
t->tqent_arg = NULL;
t->tqent_flags = 0;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
t->tqent_taskq = NULL;
}
EXPORT_SYMBOL(taskq_init_ent);
/*
* Return the next pending task, preference is given to tasks on the
* priority list which were dispatched with TQ_FRONT.
*/
static taskq_ent_t *
taskq_next_ent(taskq_t *tq)
{
struct list_head *list;
ASSERT(spin_is_locked(&tq->tq_lock));
if (!list_empty(&tq->tq_prio_list))
list = &tq->tq_prio_list;
else if (!list_empty(&tq->tq_pend_list))
list = &tq->tq_pend_list;
else
return (NULL);
return (list_entry(list->next, taskq_ent_t, tqent_list));
}
/*
* Spawns a new thread for the specified taskq.
*/
static void
taskq_thread_spawn_task(void *arg)
{
taskq_t *tq = (taskq_t *)arg;
unsigned long flags;
if (taskq_thread_create(tq) == NULL) {
/* restore spawning count if failed */
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
tq->tq_nspawn--;
spin_unlock_irqrestore(&tq->tq_lock, flags);
}
}
/*
* Spawn addition threads for dynamic taskqs (TASKQ_DYNAMIC) the current
* number of threads is insufficient to handle the pending tasks. These
* new threads must be created by the dedicated dynamic_taskq to avoid
* deadlocks between thread creation and memory reclaim. The system_taskq
* which is also a dynamic taskq cannot be safely used for this.
*/
static int
taskq_thread_spawn(taskq_t *tq)
{
int spawning = 0;
if (!(tq->tq_flags & TASKQ_DYNAMIC))
return (0);
if ((tq->tq_nthreads + tq->tq_nspawn < tq->tq_maxthreads) &&
(tq->tq_flags & TASKQ_ACTIVE)) {
spawning = (++tq->tq_nspawn);
taskq_dispatch(dynamic_taskq, taskq_thread_spawn_task,
tq, TQ_NOSLEEP);
}
return (spawning);
}
/*
* Threads in a dynamic taskq should only exit once it has been completely
* drained and no other threads are actively servicing tasks. This prevents
* threads from being created and destroyed more than is required.
*
* The first thread is the thread list is treated as the primary thread.
* There is nothing special about the primary thread but in order to avoid
* all the taskq pids from changing we opt to make it long running.
*/
static int
taskq_thread_should_stop(taskq_t *tq, taskq_thread_t *tqt)
{
ASSERT(spin_is_locked(&tq->tq_lock));
if (!(tq->tq_flags & TASKQ_DYNAMIC))
return (0);
if (list_first_entry(&(tq->tq_thread_list), taskq_thread_t,
tqt_thread_list) == tqt)
return (0);
return
((tq->tq_nspawn == 0) && /* No threads are being spawned */
(tq->tq_nactive == 0) && /* No threads are handling tasks */
(tq->tq_nthreads > 1) && /* More than 1 thread is running */
(!taskq_next_ent(tq)) && /* There are no pending tasks */
(spl_taskq_thread_dynamic)); /* Dynamic taskqs are allowed */
}
static int
taskq_thread(void *args)
{
DECLARE_WAITQUEUE(wait, current);
sigset_t blocked;
taskq_thread_t *tqt = args;
taskq_t *tq;
taskq_ent_t *t;
int seq_tasks = 0;
unsigned long flags;
ASSERT(tqt);
ASSERT(tqt->tqt_tq);
tq = tqt->tqt_tq;
current->flags |= PF_NOFREEZE;
(void) spl_fstrans_mark();
sigfillset(&blocked);
sigprocmask(SIG_BLOCK, &blocked, NULL);
flush_signals(current);
tsd_set(taskq_tsd, tq);
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
/*
* If we are dynamically spawned, decrease spawning count. Note that
* we could be created during taskq_create, in which case we shouldn't
* do the decrement. But it's fine because taskq_create will reset
* tq_nspawn later.
*/
if (tq->tq_flags & TASKQ_DYNAMIC)
tq->tq_nspawn--;
/* Immediately exit if more threads than allowed were created. */
if (tq->tq_nthreads >= tq->tq_maxthreads)
goto error;
tq->tq_nthreads++;
list_add_tail(&tqt->tqt_thread_list, &tq->tq_thread_list);
wake_up(&tq->tq_wait_waitq);
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
if (list_empty(&tq->tq_pend_list) &&
list_empty(&tq->tq_prio_list)) {
if (taskq_thread_should_stop(tq, tqt)) {
wake_up_all(&tq->tq_wait_waitq);
break;
}
add_wait_queue_exclusive(&tq->tq_work_waitq, &wait);
spin_unlock_irqrestore(&tq->tq_lock, flags);
schedule();
seq_tasks = 0;
spin_lock_irqsave_nested(&tq->tq_lock, flags,
tq->tq_lock_class);
remove_wait_queue(&tq->tq_work_waitq, &wait);
} else {
__set_current_state(TASK_RUNNING);
}
if ((t = taskq_next_ent(tq)) != NULL) {
list_del_init(&t->tqent_list);
/*
* In order to support recursively dispatching a
* preallocated taskq_ent_t, tqent_id must be
* stored prior to executing tqent_func.
*/
Swap taskq_ent_t with taskqid_t in taskq_thread_t The taskq_t's active thread list is sorted based on its tqt_ent->tqent_id field. The list is kept sorted solely by inserting new taskq_thread_t's in their correct sorted location; no other means is used. This means that once inserted, if a taskq_thread_t's tqt_ent->tqent_id field changes, the list runs the risk of no longer being sorted. Prior to the introduction of the taskq_dispatch_prealloc() interface, this was not a problem as a taskq_ent_t actively being serviced under the old interface should always have a static tqent_id field. Thus, once the taskq_thread_t is added to the taskq_t's active thread list, the taskq_thread_t's tqt_ent->tqent_id field would remain constant. Now, this is no longer the case. Currently, if using the taskq_dispatch_prealloc() interface, any given taskq_ent_t actively being serviced _may_ have its tqent_id value incremented. This happens when the preallocated taskq_ent_t structure is recursively dispatched. Thus, a taskq_thread_t could potentially have its tqt_ent->tqent_id field silently modified from under its feet. If this were to happen to a taskq_thread_t on a taskq_t's active thread list, this would compromise the integrity of the order of the list (as the list _may_ no longer be sorted). To get around this, the taskq_thread_t's taskq_ent_t pointer was replaced with its own static copy of the tqent_id. So, as a taskq_ent_t is pulled off of the taskq_t's pending list, a static copy of its tqent_id is made and this copy is used to sort the active thread list. Using a static copy is key in ensuring the integrity of the order of the active thread list. Even if the underlying taskq_ent_t is recursively dispatched (as has its tqent_id modified), this static copy stored inside the taskq_thread_t will remain constant. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #71
2011-12-16 21:44:31 +04:00
tqt->tqt_id = t->tqent_id;
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
tqt->tqt_task = t;
/*
* We must store a copy of the flags prior to
* servicing the task (servicing a prealloc'd task
* returns the ownership of the tqent back to
* the caller of taskq_dispatch). Thus,
* tqent_flags _may_ change within the call.
*/
tqt->tqt_flags = t->tqent_flags;
taskq_insert_in_order(tq, tqt);
tq->tq_nactive++;
spin_unlock_irqrestore(&tq->tq_lock, flags);
/* Perform the requested task */
t->tqent_func(t->tqent_arg);
spin_lock_irqsave_nested(&tq->tq_lock, flags,
tq->tq_lock_class);
tq->tq_nactive--;
list_del_init(&tqt->tqt_active_list);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
tqt->tqt_task = NULL;
/* For prealloc'd tasks, we don't free anything. */
if (!(tqt->tqt_flags & TQENT_FLAG_PREALLOC))
task_done(tq, t);
/*
* When the current lowest outstanding taskqid is
* done calculate the new lowest outstanding id
*/
Swap taskq_ent_t with taskqid_t in taskq_thread_t The taskq_t's active thread list is sorted based on its tqt_ent->tqent_id field. The list is kept sorted solely by inserting new taskq_thread_t's in their correct sorted location; no other means is used. This means that once inserted, if a taskq_thread_t's tqt_ent->tqent_id field changes, the list runs the risk of no longer being sorted. Prior to the introduction of the taskq_dispatch_prealloc() interface, this was not a problem as a taskq_ent_t actively being serviced under the old interface should always have a static tqent_id field. Thus, once the taskq_thread_t is added to the taskq_t's active thread list, the taskq_thread_t's tqt_ent->tqent_id field would remain constant. Now, this is no longer the case. Currently, if using the taskq_dispatch_prealloc() interface, any given taskq_ent_t actively being serviced _may_ have its tqent_id value incremented. This happens when the preallocated taskq_ent_t structure is recursively dispatched. Thus, a taskq_thread_t could potentially have its tqt_ent->tqent_id field silently modified from under its feet. If this were to happen to a taskq_thread_t on a taskq_t's active thread list, this would compromise the integrity of the order of the list (as the list _may_ no longer be sorted). To get around this, the taskq_thread_t's taskq_ent_t pointer was replaced with its own static copy of the tqent_id. So, as a taskq_ent_t is pulled off of the taskq_t's pending list, a static copy of its tqent_id is made and this copy is used to sort the active thread list. Using a static copy is key in ensuring the integrity of the order of the active thread list. Even if the underlying taskq_ent_t is recursively dispatched (as has its tqent_id modified), this static copy stored inside the taskq_thread_t will remain constant. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #71
2011-12-16 21:44:31 +04:00
if (tq->tq_lowest_id == tqt->tqt_id) {
tq->tq_lowest_id = taskq_lowest_id(tq);
Swap taskq_ent_t with taskqid_t in taskq_thread_t The taskq_t's active thread list is sorted based on its tqt_ent->tqent_id field. The list is kept sorted solely by inserting new taskq_thread_t's in their correct sorted location; no other means is used. This means that once inserted, if a taskq_thread_t's tqt_ent->tqent_id field changes, the list runs the risk of no longer being sorted. Prior to the introduction of the taskq_dispatch_prealloc() interface, this was not a problem as a taskq_ent_t actively being serviced under the old interface should always have a static tqent_id field. Thus, once the taskq_thread_t is added to the taskq_t's active thread list, the taskq_thread_t's tqt_ent->tqent_id field would remain constant. Now, this is no longer the case. Currently, if using the taskq_dispatch_prealloc() interface, any given taskq_ent_t actively being serviced _may_ have its tqent_id value incremented. This happens when the preallocated taskq_ent_t structure is recursively dispatched. Thus, a taskq_thread_t could potentially have its tqt_ent->tqent_id field silently modified from under its feet. If this were to happen to a taskq_thread_t on a taskq_t's active thread list, this would compromise the integrity of the order of the list (as the list _may_ no longer be sorted). To get around this, the taskq_thread_t's taskq_ent_t pointer was replaced with its own static copy of the tqent_id. So, as a taskq_ent_t is pulled off of the taskq_t's pending list, a static copy of its tqent_id is made and this copy is used to sort the active thread list. Using a static copy is key in ensuring the integrity of the order of the active thread list. Even if the underlying taskq_ent_t is recursively dispatched (as has its tqent_id modified), this static copy stored inside the taskq_thread_t will remain constant. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #71
2011-12-16 21:44:31 +04:00
ASSERT3S(tq->tq_lowest_id, >, tqt->tqt_id);
}
/* Spawn additional taskq threads if required. */
if ((++seq_tasks) > spl_taskq_thread_sequential &&
taskq_thread_spawn(tq))
seq_tasks = 0;
tqt->tqt_id = TASKQID_INVALID;
tqt->tqt_flags = 0;
wake_up_all(&tq->tq_wait_waitq);
} else {
if (taskq_thread_should_stop(tq, tqt))
break;
}
set_current_state(TASK_INTERRUPTIBLE);
}
__set_current_state(TASK_RUNNING);
tq->tq_nthreads--;
list_del_init(&tqt->tqt_thread_list);
error:
kmem_free(tqt, sizeof (taskq_thread_t));
spin_unlock_irqrestore(&tq->tq_lock, flags);
tsd_set(taskq_tsd, NULL);
return (0);
}
static taskq_thread_t *
taskq_thread_create(taskq_t *tq)
{
static int last_used_cpu = 0;
taskq_thread_t *tqt;
tqt = kmem_alloc(sizeof (*tqt), KM_PUSHPAGE);
INIT_LIST_HEAD(&tqt->tqt_thread_list);
INIT_LIST_HEAD(&tqt->tqt_active_list);
tqt->tqt_tq = tq;
tqt->tqt_id = TASKQID_INVALID;
tqt->tqt_thread = spl_kthread_create(taskq_thread, tqt,
"%s", tq->tq_name);
if (tqt->tqt_thread == NULL) {
kmem_free(tqt, sizeof (taskq_thread_t));
return (NULL);
}
if (spl_taskq_thread_bind) {
last_used_cpu = (last_used_cpu + 1) % num_online_cpus();
kthread_bind(tqt->tqt_thread, last_used_cpu);
}
if (spl_taskq_thread_priority)
set_user_nice(tqt->tqt_thread, PRIO_TO_NICE(tq->tq_pri));
wake_up_process(tqt->tqt_thread);
return (tqt);
}
taskq_t *
taskq_create(const char *name, int nthreads, pri_t pri,
int minalloc, int maxalloc, uint_t flags)
{
taskq_t *tq;
taskq_thread_t *tqt;
int count = 0, rc = 0, i;
unsigned long irqflags;
ASSERT(name != NULL);
ASSERT(minalloc >= 0);
ASSERT(maxalloc <= INT_MAX);
ASSERT(!(flags & (TASKQ_CPR_SAFE))); /* Unsupported */
/* Scale the number of threads using nthreads as a percentage */
if (flags & TASKQ_THREADS_CPU_PCT) {
ASSERT(nthreads <= 100);
ASSERT(nthreads >= 0);
nthreads = MIN(nthreads, 100);
nthreads = MAX(nthreads, 0);
nthreads = MAX((num_online_cpus() * nthreads) / 100, 1);
}
tq = kmem_alloc(sizeof (*tq), KM_PUSHPAGE);
if (tq == NULL)
return (NULL);
spin_lock_init(&tq->tq_lock);
INIT_LIST_HEAD(&tq->tq_thread_list);
INIT_LIST_HEAD(&tq->tq_active_list);
tq->tq_name = strdup(name);
tq->tq_nactive = 0;
tq->tq_nthreads = 0;
tq->tq_nspawn = 0;
tq->tq_maxthreads = nthreads;
tq->tq_pri = pri;
tq->tq_minalloc = minalloc;
tq->tq_maxalloc = maxalloc;
tq->tq_nalloc = 0;
tq->tq_flags = (flags | TASKQ_ACTIVE);
tq->tq_next_id = TASKQID_INITIAL;
tq->tq_lowest_id = TASKQID_INITIAL;
INIT_LIST_HEAD(&tq->tq_free_list);
INIT_LIST_HEAD(&tq->tq_pend_list);
INIT_LIST_HEAD(&tq->tq_prio_list);
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
INIT_LIST_HEAD(&tq->tq_delay_list);
init_waitqueue_head(&tq->tq_work_waitq);
init_waitqueue_head(&tq->tq_wait_waitq);
tq->tq_lock_class = TQ_LOCK_GENERAL;
INIT_LIST_HEAD(&tq->tq_taskqs);
if (flags & TASKQ_PREPOPULATE) {
spin_lock_irqsave_nested(&tq->tq_lock, irqflags,
tq->tq_lock_class);
for (i = 0; i < minalloc; i++)
task_done(tq, task_alloc(tq, TQ_PUSHPAGE | TQ_NEW,
&irqflags));
spin_unlock_irqrestore(&tq->tq_lock, irqflags);
}
if ((flags & TASKQ_DYNAMIC) && spl_taskq_thread_dynamic)
nthreads = 1;
for (i = 0; i < nthreads; i++) {
tqt = taskq_thread_create(tq);
if (tqt == NULL)
rc = 1;
else
count++;
}
/* Wait for all threads to be started before potential destroy */
wait_event(tq->tq_wait_waitq, tq->tq_nthreads == count);
/*
* taskq_thread might have touched nspawn, but we don't want them to
* because they're not dynamically spawned. So we reset it to 0
*/
tq->tq_nspawn = 0;
if (rc) {
taskq_destroy(tq);
tq = NULL;
} else {
down_write(&tq_list_sem);
tq->tq_instance = taskq_find_by_name(name) + 1;
list_add_tail(&tq->tq_taskqs, &tq_list);
up_write(&tq_list_sem);
}
return (tq);
}
EXPORT_SYMBOL(taskq_create);
void
taskq_destroy(taskq_t *tq)
{
struct task_struct *thread;
taskq_thread_t *tqt;
taskq_ent_t *t;
unsigned long flags;
ASSERT(tq);
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
tq->tq_flags &= ~TASKQ_ACTIVE;
spin_unlock_irqrestore(&tq->tq_lock, flags);
/*
* When TASKQ_ACTIVE is clear new tasks may not be added nor may
* new worker threads be spawned for dynamic taskq.
*/
if (dynamic_taskq != NULL)
taskq_wait_outstanding(dynamic_taskq, 0);
taskq_wait(tq);
/* remove taskq from global list used by the kstats */
down_write(&tq_list_sem);
list_del(&tq->tq_taskqs);
up_write(&tq_list_sem);
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
/* wait for spawning threads to insert themselves to the list */
while (tq->tq_nspawn) {
spin_unlock_irqrestore(&tq->tq_lock, flags);
schedule_timeout_interruptible(1);
spin_lock_irqsave_nested(&tq->tq_lock, flags, tq->tq_lock_class);
}
/*
* Signal each thread to exit and block until it does. Each thread
* is responsible for removing itself from the list and freeing its
* taskq_thread_t. This allows for idle threads to opt to remove
* themselves from the taskq. They can be recreated as needed.
*/
while (!list_empty(&tq->tq_thread_list)) {
tqt = list_entry(tq->tq_thread_list.next,
taskq_thread_t, tqt_thread_list);
thread = tqt->tqt_thread;
spin_unlock_irqrestore(&tq->tq_lock, flags);
kthread_stop(thread);
spin_lock_irqsave_nested(&tq->tq_lock, flags,
tq->tq_lock_class);
}
while (!list_empty(&tq->tq_free_list)) {
t = list_entry(tq->tq_free_list.next, taskq_ent_t, tqent_list);
ASSERT(!(t->tqent_flags & TQENT_FLAG_PREALLOC));
list_del_init(&t->tqent_list);
task_free(tq, t);
}
ASSERT0(tq->tq_nthreads);
ASSERT0(tq->tq_nalloc);
ASSERT0(tq->tq_nspawn);
ASSERT(list_empty(&tq->tq_thread_list));
ASSERT(list_empty(&tq->tq_active_list));
ASSERT(list_empty(&tq->tq_free_list));
ASSERT(list_empty(&tq->tq_pend_list));
ASSERT(list_empty(&tq->tq_prio_list));
taskq delay/cancel functionality Add the ability to dispatch a delayed task to a taskq. The desired behavior is for the task to be queued but not executed by a worker thread until the expiration time is reached. To achieve this two new functions were added. * taskq_dispatch_delay() - This function behaves exactly like taskq_dispatch() however it takes a third 'expire_time' argument. The caller should pass the desired time the task should be executed as an absolute value in jiffies. The task is guarenteed not to run before this time, it may run slightly latter if all the worker threads are busy. * taskq_cancel_id() - Given a task id attempt to cancel the task before it gets executed. This is primarily useful for canceling delay tasks but can be used for canceling any previously dispatched task. There are three possible return values. 0 - The task was found and canceled before it was executed. ENOENT - The task was not found, either it was already run or an invalid task id was supplied by the caller. EBUSY - The task is currently executing any may not be canceled. This function will block until the task has been completed. * taskq_wait_all() - The taskq_wait_id() function was renamed taskq_wait_all() to more clearly reflect its actual behavior. It is only curreny used by the splat taskq regression tests. * taskq_wait_id() - Historically, the only difference between this function and taskq_wait() was that you passed the task id. In both functions you would block until ALL lower task ids which executed. This was semantically correct but could be very slow particularly if there were delay tasks submitted. To better accomidate the delay tasks this function was reimplemnted. It will now only block until the passed task id has been completed. This is actually a fairly low risk change for a few reasons. * Only new ZFS callers will make use of the new interfaces and very little common code was changed to support the new functions. * The existing taskq_wait() implementation was not changed just slightly refactored. * The newly optimized taskq_wait_id() implementation was never used by ZFS we can't accidentally introduce a new bug there. NOTE: This functionality does not exist in the Illumos taskqs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-07 00:38:19 +04:00
ASSERT(list_empty(&tq->tq_delay_list));
spin_unlock_irqrestore(&tq->tq_lock, flags);
strfree(tq->tq_name);
kmem_free(tq, sizeof (taskq_t));
}
EXPORT_SYMBOL(taskq_destroy);
2009-01-06 02:08:03 +03:00
static unsigned int spl_taskq_kick = 0;
/*
* 2.6.36 API Change
* module_param_cb is introduced to take kernel_param_ops and
* module_param_call is marked as obsolete. Also set and get operations
* were changed to take a 'const struct kernel_param *'.
*/
static int
#ifdef module_param_cb
param_set_taskq_kick(const char *val, const struct kernel_param *kp)
#else
param_set_taskq_kick(const char *val, struct kernel_param *kp)
#endif
{
int ret;
taskq_t *tq;
taskq_ent_t *t;
unsigned long flags;
ret = param_set_uint(val, kp);
if (ret < 0 || !spl_taskq_kick)
return (ret);
/* reset value */
spl_taskq_kick = 0;
down_read(&tq_list_sem);
list_for_each_entry(tq, &tq_list, tq_taskqs) {
spin_lock_irqsave_nested(&tq->tq_lock, flags,
tq->tq_lock_class);
/* Check if the first pending is older than 5 seconds */
t = taskq_next_ent(tq);
if (t && time_after(jiffies, t->tqent_birth + 5*HZ)) {
(void) taskq_thread_spawn(tq);
printk(KERN_INFO "spl: Kicked taskq %s/%d\n",
tq->tq_name, tq->tq_instance);
}
spin_unlock_irqrestore(&tq->tq_lock, flags);
}
up_read(&tq_list_sem);
return (ret);
}
#ifdef module_param_cb
static const struct kernel_param_ops param_ops_taskq_kick = {
.set = param_set_taskq_kick,
.get = param_get_uint,
};
module_param_cb(spl_taskq_kick, &param_ops_taskq_kick, &spl_taskq_kick, 0644);
#else
module_param_call(spl_taskq_kick, param_set_taskq_kick, param_get_uint,
&spl_taskq_kick, 0644);
#endif
MODULE_PARM_DESC(spl_taskq_kick,
"Write nonzero to kick stuck taskqs to spawn more threads");
2009-01-06 02:08:03 +03:00
int
spl_taskq_init(void)
{
tsd_create(&taskq_tsd, NULL);
system_taskq = taskq_create("spl_system_taskq", MAX(boot_ncpus, 64),
maxclsyspri, boot_ncpus, INT_MAX, TASKQ_PREPOPULATE|TASKQ_DYNAMIC);
2009-01-06 02:08:03 +03:00
if (system_taskq == NULL)
return (1);
2009-01-06 02:08:03 +03:00
system_delay_taskq = taskq_create("spl_delay_taskq", MAX(boot_ncpus, 4),
maxclsyspri, boot_ncpus, INT_MAX, TASKQ_PREPOPULATE|TASKQ_DYNAMIC);
if (system_delay_taskq == NULL) {
taskq_destroy(system_taskq);
return (1);
}
dynamic_taskq = taskq_create("spl_dynamic_taskq", 1,
maxclsyspri, boot_ncpus, INT_MAX, TASKQ_PREPOPULATE);
if (dynamic_taskq == NULL) {
taskq_destroy(system_taskq);
taskq_destroy(system_delay_taskq);
return (1);
}
/*
* This is used to annotate tq_lock, so
* taskq_dispatch -> taskq_thread_spawn -> taskq_dispatch
* does not trigger a lockdep warning re: possible recursive locking
*/
dynamic_taskq->tq_lock_class = TQ_LOCK_DYNAMIC;
return (0);
2009-01-06 02:08:03 +03:00
}
void
spl_taskq_fini(void)
{
taskq_destroy(dynamic_taskq);
dynamic_taskq = NULL;
taskq_destroy(system_delay_taskq);
system_delay_taskq = NULL;
2009-01-06 02:08:03 +03:00
taskq_destroy(system_taskq);
system_taskq = NULL;
tsd_destroy(&taskq_tsd);
2009-01-06 02:08:03 +03:00
}