mirror_zfs/cmd/zed/zed_event.c

865 lines
21 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license from the top-level
* OPENSOLARIS.LICENSE or <http://opensource.org/licenses/CDDL-1.0>.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each file
* and include the License file from the top-level OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Developed at Lawrence Livermore National Laboratory (LLNL-CODE-403049).
* Copyright (C) 2013-2014 Lawrence Livermore National Security, LLC.
*/
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <libzfs.h> /* FIXME: Replace with libzfs_core. */
#include <paths.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/zfs_ioctl.h>
#include <time.h>
#include <unistd.h>
#include "zed.h"
#include "zed_conf.h"
#include "zed_exec.h"
#include "zed_file.h"
#include "zed_log.h"
#include "zed_strings.h"
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
#define MAXBUF 4096
/*
* Open the libzfs interface.
*/
void
zed_event_init(struct zed_conf *zcp)
{
if (!zcp)
zed_log_die("Failed zed_event_init: %s", strerror(EINVAL));
zcp->zfs_hdl = libzfs_init();
if (!zcp->zfs_hdl)
zed_log_die("Failed to initialize libzfs");
zcp->zevent_fd = open(ZFS_DEV, O_RDWR);
if (zcp->zevent_fd < 0)
zed_log_die("Failed to open \"%s\": %s",
ZFS_DEV, strerror(errno));
}
/*
* Close the libzfs interface.
*/
void
zed_event_fini(struct zed_conf *zcp)
{
if (!zcp)
zed_log_die("Failed zed_event_fini: %s", strerror(EINVAL));
if (zcp->zevent_fd >= 0) {
if (close(zcp->zevent_fd) < 0)
zed_log_msg(LOG_WARNING, "Failed to close \"%s\": %s",
ZFS_DEV, strerror(errno));
zcp->zevent_fd = -1;
}
if (zcp->zfs_hdl) {
libzfs_fini(zcp->zfs_hdl);
zcp->zfs_hdl = NULL;
}
}
/*
* Seek to the event specified by [saved_eid] and [saved_etime].
* This protects against processing a given event more than once.
* Return 0 upon a successful seek to the specified event, or -1 otherwise.
*
* A zevent is considered to be uniquely specified by its (eid,time) tuple.
* The unsigned 64b eid is set to 1 when the kernel module is loaded, and
* incremented by 1 for each new event. Since the state file can persist
* across a kernel module reload, the time must be checked to ensure a match.
*/
int
zed_event_seek(struct zed_conf *zcp, uint64_t saved_eid, int64_t saved_etime[])
{
uint64_t eid;
int found;
nvlist_t *nvl;
int n_dropped;
int64_t *etime;
uint_t nelem;
int rv;
if (!zcp) {
errno = EINVAL;
zed_log_msg(LOG_ERR, "Failed to seek zevent: %s",
strerror(errno));
return (-1);
}
eid = 0;
found = 0;
while ((eid < saved_eid) && !found) {
rv = zpool_events_next(zcp->zfs_hdl, &nvl, &n_dropped,
ZEVENT_NONBLOCK, zcp->zevent_fd);
if ((rv != 0) || !nvl)
break;
if (n_dropped > 0) {
zed_log_msg(LOG_WARNING, "Missed %d events", n_dropped);
/*
* FIXME: Increase max size of event nvlist in
* /sys/module/zfs/parameters/zfs_zevent_len_max ?
*/
}
if (nvlist_lookup_uint64(nvl, "eid", &eid) != 0) {
zed_log_msg(LOG_WARNING, "Failed to lookup zevent eid");
} else if (nvlist_lookup_int64_array(nvl, "time",
&etime, &nelem) != 0) {
zed_log_msg(LOG_WARNING,
"Failed to lookup zevent time (eid=%llu)", eid);
} else if (nelem != 2) {
zed_log_msg(LOG_WARNING,
"Failed to lookup zevent time (eid=%llu, nelem=%u)",
eid, nelem);
} else if ((eid != saved_eid) ||
(etime[0] != saved_etime[0]) ||
(etime[1] != saved_etime[1])) {
/* no-op */
} else {
found = 1;
}
free(nvl);
}
if (!found && (saved_eid > 0)) {
if (zpool_events_seek(zcp->zfs_hdl, ZEVENT_SEEK_START,
zcp->zevent_fd) < 0)
zed_log_msg(LOG_WARNING, "Failed to seek to eid=0");
else
eid = 0;
}
zed_log_msg(LOG_NOTICE, "Processing events since eid=%llu", eid);
return (found ? 0 : -1);
}
static int
_zed_event_convert_int8_array(char *buf, int buflen, nvpair_t *nvp)
{
int8_t *i8p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_int8_array(nvp, &i8p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%d ", i8p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_uint8_array(char *buf, int buflen, nvpair_t *nvp)
{
uint8_t *u8p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_uint8_array(nvp, &u8p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%u ", u8p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_int16_array(char *buf, int buflen, nvpair_t *nvp)
{
int16_t *i16p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_int16_array(nvp, &i16p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%d ", i16p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_uint16_array(char *buf, int buflen, nvpair_t *nvp)
{
uint16_t *u16p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_uint16_array(nvp, &u16p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%u ", u16p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_int32_array(char *buf, int buflen, nvpair_t *nvp)
{
int32_t *i32p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_int32_array(nvp, &i32p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%d ", i32p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_uint32_array(char *buf, int buflen, nvpair_t *nvp)
{
uint32_t *u32p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_uint32_array(nvp, &u32p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%u ", u32p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_int64_array(char *buf, int buflen, nvpair_t *nvp)
{
int64_t *i64p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_int64_array(nvp, &i64p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%lld ", (u_longlong_t) i64p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_uint64_array(char *buf, int buflen, nvpair_t *nvp,
const char *fmt)
{
uint64_t *u64p;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_uint64_array(nvp, &u64p, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, fmt, (u_longlong_t) u64p[i]);
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
static int
_zed_event_convert_string_array(char *buf, int buflen, nvpair_t *nvp)
{
char **strp;
uint_t nelem;
uint_t i;
char *p;
int n;
assert(buf != NULL);
(void) nvpair_value_string_array(nvp, &strp, &nelem);
for (i = 0, p = buf; (i < nelem) && (buflen > 0); i++) {
n = snprintf(p, buflen, "%s ", strp[i] ? strp[i] : "<NULL>");
if ((n < 0) || (n >= buflen)) {
*buf = '\0';
return (-1);
}
p += n;
buflen -= n;
}
if (nelem > 0)
*--p = '\0';
return (p - buf);
}
/*
* Return non-zero if nvpair [name] should be formatted in hex; o/w, return 0.
*/
static int
_zed_event_value_is_hex(const char *name)
{
const char *hex_suffix[] = {
"_guid",
"_guids",
NULL
};
const char **pp;
char *p;
if (!name)
return (0);
for (pp = hex_suffix; *pp; pp++) {
p = strstr(name, *pp);
if (p && strlen(p) == strlen(*pp))
return (1);
}
return (0);
}
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
/*
* Add an environment variable for [eid] to the container [zsp].
*
* The variable name is the concatenation of [prefix] and [name] converted to
* uppercase with non-alphanumeric characters converted to underscores;
* [prefix] is optional, and [name] must begin with an alphabetic character.
* If the converted variable name already exists within the container [zsp],
* its existing value will be replaced with the new value.
*
* The variable value is specified by the format string [fmt].
*
* Returns 0 on success, and -1 on error (with errno set).
*
* All environment variables in [zsp] should be added through this function.
*/
static int
_zed_event_add_var(uint64_t eid, zed_strings_t *zsp,
const char *prefix, const char *name, const char *fmt, ...)
{
char keybuf[MAXBUF];
char valbuf[MAXBUF];
char *dstp;
const char *srcp;
const char *lastp;
int n;
int buflen;
va_list vargs;
assert(zsp != NULL);
assert(fmt != NULL);
if (!name) {
errno = EINVAL;
zed_log_msg(LOG_WARNING,
"Failed to add variable for eid=%llu: Name is empty", eid);
return (-1);
} else if (!isalpha(name[0])) {
errno = EINVAL;
zed_log_msg(LOG_WARNING,
"Failed to add variable for eid=%llu: "
"Name \"%s\" is invalid", eid, name);
return (-1);
}
/*
* Construct the string key by converting PREFIX (if present) and NAME.
*/
dstp = keybuf;
lastp = keybuf + sizeof (keybuf);
if (prefix) {
for (srcp = prefix; *srcp && (dstp < lastp); srcp++)
*dstp++ = isalnum(*srcp) ? toupper(*srcp) : '_';
}
for (srcp = name; *srcp && (dstp < lastp); srcp++)
*dstp++ = isalnum(*srcp) ? toupper(*srcp) : '_';
if (dstp == lastp) {
errno = ENAMETOOLONG;
zed_log_msg(LOG_WARNING,
"Failed to add variable for eid=%llu: Name too long", eid);
return (-1);
}
*dstp = '\0';
/*
* Construct the string specified by "[PREFIX][NAME]=[FMT]".
*/
dstp = valbuf;
buflen = sizeof (valbuf);
n = strlcpy(dstp, keybuf, buflen);
if (n >= sizeof (valbuf)) {
errno = EMSGSIZE;
zed_log_msg(LOG_WARNING, "Failed to add %s for eid=%llu: %s",
keybuf, eid, "Exceeded buffer size");
return (-1);
}
dstp += n;
buflen -= n;
*dstp++ = '=';
buflen--;
va_start(vargs, fmt);
n = vsnprintf(dstp, buflen, fmt, vargs);
va_end(vargs);
if ((n < 0) || (n >= buflen)) {
errno = EMSGSIZE;
zed_log_msg(LOG_WARNING, "Failed to add %s for eid=%llu: %s",
keybuf, eid, "Exceeded buffer size");
return (-1);
} else if (zed_strings_add(zsp, keybuf, valbuf) < 0) {
zed_log_msg(LOG_WARNING, "Failed to add %s for eid=%llu: %s",
keybuf, eid, strerror(errno));
return (-1);
}
return (0);
}
/*
* Convert the nvpair [nvp] to a string which is added to the environment
* of the child process.
* Return 0 on success, -1 on error.
*
* FIXME: Refactor with cmd/zpool/zpool_main.c:zpool_do_events_nvprint()?
*/
static void
_zed_event_add_nvpair(uint64_t eid, zed_strings_t *zsp, nvpair_t *nvp)
{
const char *name;
data_type_t type;
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
char buf[MAXBUF];
int n;
const char *fmt;
boolean_t b;
double d;
uint8_t i8;
uint16_t i16;
uint32_t i32;
uint64_t i64;
char *str;
assert(zsp != NULL);
assert(nvp != NULL);
name = nvpair_name(nvp);
type = nvpair_type(nvp);
switch (type) {
case DATA_TYPE_BOOLEAN:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", "1");
break;
case DATA_TYPE_BOOLEAN_VALUE:
(void) nvpair_value_boolean_value(nvp, &b);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", b ? "1" : "0");
break;
case DATA_TYPE_BYTE:
(void) nvpair_value_byte(nvp, &i8);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%d", i8);
break;
case DATA_TYPE_INT8:
(void) nvpair_value_int8(nvp, (int8_t *) &i8);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%d", i8);
break;
case DATA_TYPE_UINT8:
(void) nvpair_value_uint8(nvp, &i8);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%u", i8);
break;
case DATA_TYPE_INT16:
(void) nvpair_value_int16(nvp, (int16_t *) &i16);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%d", i16);
break;
case DATA_TYPE_UINT16:
(void) nvpair_value_uint16(nvp, &i16);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%u", i16);
break;
case DATA_TYPE_INT32:
(void) nvpair_value_int32(nvp, (int32_t *) &i32);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%d", i32);
break;
case DATA_TYPE_UINT32:
(void) nvpair_value_uint32(nvp, &i32);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%u", i32);
break;
case DATA_TYPE_INT64:
(void) nvpair_value_int64(nvp, (int64_t *) &i64);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%lld", (longlong_t) i64);
break;
case DATA_TYPE_UINT64:
(void) nvpair_value_uint64(nvp, &i64);
fmt = _zed_event_value_is_hex(name) ? "0x%.16llX" : "%llu";
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), fmt, (u_longlong_t) i64);
break;
case DATA_TYPE_DOUBLE:
(void) nvpair_value_double(nvp, &d);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%g", d);
break;
case DATA_TYPE_HRTIME:
(void) nvpair_value_hrtime(nvp, (hrtime_t *) &i64);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%llu", (u_longlong_t) i64);
break;
case DATA_TYPE_NVLIST:
/* FIXME */
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", "_NOT_IMPLEMENTED_");
break;
case DATA_TYPE_STRING:
(void) nvpair_value_string(nvp, &str);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", (str ? str : "<NULL>"));
break;
case DATA_TYPE_BOOLEAN_ARRAY:
/* FIXME */
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", "_NOT_IMPLEMENTED_");
break;
case DATA_TYPE_BYTE_ARRAY:
/* FIXME */
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", "_NOT_IMPLEMENTED_");
break;
case DATA_TYPE_INT8_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_int8_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_UINT8_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_uint8_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_INT16_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_int16_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_UINT16_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_uint16_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_INT32_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_int32_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_UINT32_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_uint32_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_INT64_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_int64_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_UINT64_ARRAY:
fmt = _zed_event_value_is_hex(name) ? "0x%.16llX " : "%llu ";
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_uint64_array(buf, sizeof (buf),
nvp, fmt);
break;
case DATA_TYPE_STRING_ARRAY:
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = _zed_event_convert_string_array(buf, sizeof (buf), nvp);
break;
case DATA_TYPE_NVLIST_ARRAY:
/* FIXME */
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
n = snprintf(buf, sizeof (buf), "%s", "_NOT_IMPLEMENTED_");
break;
default:
zed_log_msg(LOG_WARNING,
"Failed to convert nvpair \"%s\" for eid=%llu: "
"Unrecognized type=%u", name, eid, (unsigned int) type);
return;
}
if ((n < 0) || (n >= sizeof (buf))) {
zed_log_msg(LOG_WARNING,
"Failed to convert nvpair \"%s\" for eid=%llu: %s",
name, eid, "Exceeded buffer size");
return;
}
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
_zed_event_add_var(eid, zsp, ZEVENT_VAR_PREFIX, name, "%s", buf);
}
/*
* Restrict various environment variables to safe and sane values
* when constructing the environment for the child process.
*
* Reference: Secure Programming Cookbook by Viega & Messier, Section 1.1.
*/
static void
_zed_event_add_env_restrict(uint64_t eid, zed_strings_t *zsp)
{
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
const char *env_restrict[][2] = {
{ "IFS", " \t\n" },
{ "PATH", _PATH_STDPATH },
{ "ZDB", SBINDIR "/zdb" },
{ "ZED", SBINDIR "/zed" },
{ "ZFS", SBINDIR "/zfs" },
{ "ZINJECT", SBINDIR "/zinject" },
{ "ZPOOL", SBINDIR "/zpool" },
{ "ZFS_ALIAS", ZFS_META_ALIAS },
{ "ZFS_VERSION", ZFS_META_VERSION },
{ "ZFS_RELEASE", ZFS_META_RELEASE },
{ NULL, NULL }
};
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
const char *(*pa)[2];
assert(zsp != NULL);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
for (pa = env_restrict; *(*pa); pa++) {
_zed_event_add_var(eid, zsp, NULL, (*pa)[0], "%s", (*pa)[1]);
}
}
/*
* Preserve specified variables from the parent environment
* when constructing the environment for the child process.
*
* Reference: Secure Programming Cookbook by Viega & Messier, Section 1.1.
*/
static void
_zed_event_add_env_preserve(uint64_t eid, zed_strings_t *zsp)
{
const char *env_preserve[] = {
"TZ",
NULL
};
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
const char **keyp;
const char *val;
assert(zsp != NULL);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
for (keyp = env_preserve; *keyp; keyp++) {
if ((val = getenv(*keyp)))
_zed_event_add_var(eid, zsp, NULL, *keyp, "%s", val);
}
}
/*
* Compute the "subclass" by removing the first 3 components of [class]
* (which seem to always be either "ereport.fs.zfs" or "resource.fs.zfs").
* Return a pointer inside the string [class], or NULL if insufficient
* components exist.
*/
static const char *
_zed_event_get_subclass(const char *class)
{
const char *p;
int i;
if (!class)
return (NULL);
p = class;
for (i = 0; i < 3; i++) {
p = strchr(p, '.');
if (!p)
break;
p++;
}
return (p);
}
/*
* Convert the zevent time from a 2-element array of 64b integers
* into a more convenient form:
* - TIME_SECS is the second component of the time.
* - TIME_NSECS is the nanosecond component of the time.
* - TIME_STRING is an almost-RFC3339-compliant string representation.
*/
static void
_zed_event_add_time_strings(uint64_t eid, zed_strings_t *zsp, int64_t etime[])
{
struct tm *stp;
char buf[32];
assert(zsp != NULL);
assert(etime != NULL);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
_zed_event_add_var(eid, zsp, ZEVENT_VAR_PREFIX, "TIME_SECS",
"%lld", (long long int) etime[0]);
_zed_event_add_var(eid, zsp, ZEVENT_VAR_PREFIX, "TIME_NSECS",
"%lld", (long long int) etime[1]);
if (!(stp = localtime((const time_t *) &etime[0]))) {
zed_log_msg(LOG_WARNING, "Failed to add %s%s for eid=%llu: %s",
ZEVENT_VAR_PREFIX, "TIME_STRING", eid, "localtime error");
} else if (!strftime(buf, sizeof (buf), "%Y-%m-%d %H:%M:%S%z", stp)) {
zed_log_msg(LOG_WARNING, "Failed to add %s%s for eid=%llu: %s",
ZEVENT_VAR_PREFIX, "TIME_STRING", eid, "strftime error");
} else {
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
_zed_event_add_var(eid, zsp, ZEVENT_VAR_PREFIX, "TIME_STRING",
"%s", buf);
}
}
/*
* Service the next zevent, blocking until one is available.
*/
void
zed_event_service(struct zed_conf *zcp)
{
nvlist_t *nvl;
nvpair_t *nvp;
int n_dropped;
zed_strings_t *zsp;
uint64_t eid;
int64_t *etime;
uint_t nelem;
char *class;
const char *subclass;
int rv;
if (!zcp) {
errno = EINVAL;
zed_log_msg(LOG_ERR, "Failed to service zevent: %s",
strerror(errno));
return;
}
rv = zpool_events_next(zcp->zfs_hdl, &nvl, &n_dropped, ZEVENT_NONE,
zcp->zevent_fd);
if ((rv != 0) || !nvl)
return;
if (n_dropped > 0) {
zed_log_msg(LOG_WARNING, "Missed %d events", n_dropped);
/*
* FIXME: Increase max size of event nvlist in
* /sys/module/zfs/parameters/zfs_zevent_len_max ?
*/
}
if (nvlist_lookup_uint64(nvl, "eid", &eid) != 0) {
zed_log_msg(LOG_WARNING, "Failed to lookup zevent eid");
} else if (nvlist_lookup_int64_array(
nvl, "time", &etime, &nelem) != 0) {
zed_log_msg(LOG_WARNING,
"Failed to lookup zevent time (eid=%llu)", eid);
} else if (nelem != 2) {
zed_log_msg(LOG_WARNING,
"Failed to lookup zevent time (eid=%llu, nelem=%u)",
eid, nelem);
} else if (nvlist_lookup_string(nvl, "class", &class) != 0) {
zed_log_msg(LOG_WARNING,
"Failed to lookup zevent class (eid=%llu)", eid);
} else {
zsp = zed_strings_create();
nvp = NULL;
while ((nvp = nvlist_next_nvpair(nvl, nvp)))
_zed_event_add_nvpair(eid, zsp, nvp);
_zed_event_add_env_restrict(eid, zsp);
_zed_event_add_env_preserve(eid, zsp);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
_zed_event_add_var(eid, zsp, ZED_VAR_PREFIX, "PID",
"%d", (int) getpid());
_zed_event_add_var(eid, zsp, ZED_VAR_PREFIX, "ZEDLET_DIR",
"%s", zcp->zedlet_dir);
subclass = _zed_event_get_subclass(class);
Protect against adding duplicate strings in ZED The zed_strings container stores strings in an AVL, but does not check for duplicate strings being added. Within the AVL, strings are indexed by the string value itself. avl_add() requires the node being added must not already exist in the tree, and will assert() if this is not the case. This should not cause problems in practice. ZED uses this container in two places. In zed_conf.c, it is used to store the names of enabled zedlets as zed scans the zedlet directory listing; duplicate entries cannot occur here since duplicate names cannot occur within a directory. In zed_event.c, it is used to store the environment variables (as "NAME=VALUE" strings) that will be passed to zedlets; duplicate strings here should never happen unless there is a bug resulting in a duplicate nvpair or environment variable. This commit protects against adding a duplicate to a zed_strings container by first checking for the string being added, and removing the previous entry should one exist. This implements a "last one wins" policy. This commit also changes the prototype for zed_strings_add() to allow the string key (by which it is indexed in the AVL) to differ from the string value. By adding zedlet environment variables using the variable name as the key, multiple adds for the same variable name will result in only the last value being stored. Finally, this commit routes all additions of zedlet environment variables through the updated _zed_event_add_var(). This ensures all zedlet environment variable names are properly converted. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3042
2014-10-19 23:05:07 +04:00
_zed_event_add_var(eid, zsp, ZEVENT_VAR_PREFIX, "SUBCLASS",
"%s", (subclass ? subclass : class));
_zed_event_add_time_strings(eid, zsp, etime);
zed_exec_process(eid, class, subclass,
zcp->zedlet_dir, zcp->zedlets, zsp, zcp->zevent_fd);
zed_conf_write_state(zcp, eid, etime);
zed_strings_destroy(zsp);
}
nvlist_free(nvl);
}