mirror_zfs/module/zfs/txg.c

1074 lines
28 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Portions Copyright 2011 Martin Matuska
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 20:11:49 +03:00
* Copyright (c) 2012, 2019 by Delphix. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
#include <sys/zfs_context.h>
#include <sys/txg_impl.h>
#include <sys/dmu_impl.h>
#include <sys/spa_impl.h>
#include <sys/dmu_tx.h>
2008-11-20 23:01:55 +03:00
#include <sys/dsl_pool.h>
#include <sys/dsl_scan.h>
#include <sys/zil.h>
2008-11-20 23:01:55 +03:00
#include <sys/callb.h>
#include <sys/trace_zfs.h>
2008-11-20 23:01:55 +03:00
/*
* ZFS Transaction Groups
* ----------------------
*
* ZFS transaction groups are, as the name implies, groups of transactions
* that act on persistent state. ZFS asserts consistency at the granularity of
* these transaction groups. Each successive transaction group (txg) is
* assigned a 64-bit consecutive identifier. There are three active
* transaction group states: open, quiescing, or syncing. At any given time,
* there may be an active txg associated with each state; each active txg may
* either be processing, or blocked waiting to enter the next state. There may
* be up to three active txgs, and there is always a txg in the open state
* (though it may be blocked waiting to enter the quiescing state). In broad
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
* strokes, transactions -- operations that change in-memory structures -- are
* accepted into the txg in the open state, and are completed while the txg is
* in the open or quiescing states. The accumulated changes are written to
* disk in the syncing state.
*
* Open
*
* When a new txg becomes active, it first enters the open state. New
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
* transactions -- updates to in-memory structures -- are assigned to the
* currently open txg. There is always a txg in the open state so that ZFS can
* accept new changes (though the txg may refuse new changes if it has hit
* some limit). ZFS advances the open txg to the next state for a variety of
* reasons such as it hitting a time or size threshold, or the execution of an
* administrative action that must be completed in the syncing state.
*
* Quiescing
*
* After a txg exits the open state, it enters the quiescing state. The
* quiescing state is intended to provide a buffer between accepting new
* transactions in the open state and writing them out to stable storage in
* the syncing state. While quiescing, transactions can continue their
* operation without delaying either of the other states. Typically, a txg is
* in the quiescing state very briefly since the operations are bounded by
* software latencies rather than, say, slower I/O latencies. After all
* transactions complete, the txg is ready to enter the next state.
*
* Syncing
*
* In the syncing state, the in-memory state built up during the open and (to
* a lesser degree) the quiescing states is written to stable storage. The
* process of writing out modified data can, in turn modify more data. For
* example when we write new blocks, we need to allocate space for them; those
* allocations modify metadata (space maps)... which themselves must be
* written to stable storage. During the sync state, ZFS iterates, writing out
* data until it converges and all in-memory changes have been written out.
* The first such pass is the largest as it encompasses all the modified user
* data (as opposed to filesystem metadata). Subsequent passes typically have
* far less data to write as they consist exclusively of filesystem metadata.
*
* To ensure convergence, after a certain number of passes ZFS begins
* overwriting locations on stable storage that had been allocated earlier in
* the syncing state (and subsequently freed). ZFS usually allocates new
* blocks to optimize for large, continuous, writes. For the syncing state to
* converge however it must complete a pass where no new blocks are allocated
* since each allocation requires a modification of persistent metadata.
* Further, to hasten convergence, after a prescribed number of passes, ZFS
* also defers frees, and stops compressing.
*
* In addition to writing out user data, we must also execute synctasks during
* the syncing context. A synctask is the mechanism by which some
* administrative activities work such as creating and destroying snapshots or
* datasets. Note that when a synctask is initiated it enters the open txg,
* and ZFS then pushes that txg as quickly as possible to completion of the
* syncing state in order to reduce the latency of the administrative
* activity. To complete the syncing state, ZFS writes out a new uberblock,
* the root of the tree of blocks that comprise all state stored on the ZFS
* pool. Finally, if there is a quiesced txg waiting, we signal that it can
* now transition to the syncing state.
2008-11-20 23:01:55 +03:00
*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static void txg_sync_thread(void *arg);
static void txg_quiesce_thread(void *arg);
2008-11-20 23:01:55 +03:00
int zfs_txg_timeout = 5; /* max seconds worth of delta per txg */
2008-11-20 23:01:55 +03:00
/*
* Prepare the txg subsystem.
*/
void
txg_init(dsl_pool_t *dp, uint64_t txg)
{
tx_state_t *tx = &dp->dp_tx;
int c;
bzero(tx, sizeof (tx_state_t));
tx->tx_cpu = vmem_zalloc(max_ncpus * sizeof (tx_cpu_t), KM_SLEEP);
2008-11-20 23:01:55 +03:00
for (c = 0; c < max_ncpus; c++) {
int i;
mutex_init(&tx->tx_cpu[c].tc_lock, NULL, MUTEX_DEFAULT, NULL);
Identify locks flagged by lockdep When running a kernel with CONFIG_LOCKDEP=y, lockdep reports possible recursive locking in some cases and possible circular locking dependency in others, within the SPL and ZFS modules. This patch uses a mutex type defined in SPL, MUTEX_NOLOCKDEP, to mark such mutexes when they are initialized. This mutex type causes attempts to take or release those locks to be wrapped in lockdep_off() and lockdep_on() calls to silence the dependency checker and allow the use of lock_stats to examine contention. For RW locks, it uses an analogous lock type, RW_NOLOCKDEP. The goal is that these locks are ultimately changed back to type MUTEX_DEFAULT or RW_DEFAULT, after the locks are annotated to reflect their relationship (e.g. z_name_lock below) or any real problem with the lock dependencies are fixed. Some of the affected locks are: tc_open_lock: ============= This is an array of locks, all with same name, which txg_quiesce must take all of in order to move txg to next state. All default to the same lockdep class, and so to lockdep appears recursive. zp->z_name_lock: ================ In zfs_rmdir, dzp = znode for the directory (input to zfs_dirent_lock) zp = znode for the entry being removed (output of zfs_dirent_lock) zfs_rmdir()->zfs_dirent_lock() takes z_name_lock in dzp zfs_rmdir() takes z_name_lock in zp Since both dzp and zp are type znode_t, the locks have the same default class, and lockdep considers it a possible recursive lock attempt. l->l_rwlock: ============ zap_expand_leaf() sometimes creates two new zap leaf structures, via these call paths: zap_deref_leaf()->zap_get_leaf_byblk()->zap_leaf_open() zap_expand_leaf()->zap_create_leaf()->zap_expand_leaf()->zap_create_leaf() Because both zap_leaf_open() and zap_create_leaf() initialize l->l_rwlock in their (separate) leaf structures, the lockdep class is the same, and the linux kernel believes these might both be the same lock, and emits a possible recursive lock warning. Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3895
2015-10-15 23:08:27 +03:00
mutex_init(&tx->tx_cpu[c].tc_open_lock, NULL, MUTEX_NOLOCKDEP,
NULL);
2008-11-20 23:01:55 +03:00
for (i = 0; i < TXG_SIZE; i++) {
cv_init(&tx->tx_cpu[c].tc_cv[i], NULL, CV_DEFAULT,
NULL);
list_create(&tx->tx_cpu[c].tc_callbacks[i],
sizeof (dmu_tx_callback_t),
offsetof(dmu_tx_callback_t, dcb_node));
2008-11-20 23:01:55 +03:00
}
}
mutex_init(&tx->tx_sync_lock, NULL, MUTEX_DEFAULT, NULL);
2009-01-16 00:59:39 +03:00
cv_init(&tx->tx_sync_more_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tx->tx_sync_done_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tx->tx_quiesce_more_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tx->tx_quiesce_done_cv, NULL, CV_DEFAULT, NULL);
cv_init(&tx->tx_exit_cv, NULL, CV_DEFAULT, NULL);
2008-11-20 23:01:55 +03:00
tx->tx_open_txg = txg;
}
/*
* Close down the txg subsystem.
*/
void
txg_fini(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
int c;
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT0(tx->tx_threads);
2008-11-20 23:01:55 +03:00
mutex_destroy(&tx->tx_sync_lock);
2009-01-16 00:59:39 +03:00
cv_destroy(&tx->tx_sync_more_cv);
cv_destroy(&tx->tx_sync_done_cv);
cv_destroy(&tx->tx_quiesce_more_cv);
cv_destroy(&tx->tx_quiesce_done_cv);
cv_destroy(&tx->tx_exit_cv);
2008-11-20 23:01:55 +03:00
for (c = 0; c < max_ncpus; c++) {
int i;
mutex_destroy(&tx->tx_cpu[c].tc_open_lock);
2008-11-20 23:01:55 +03:00
mutex_destroy(&tx->tx_cpu[c].tc_lock);
for (i = 0; i < TXG_SIZE; i++) {
2008-11-20 23:01:55 +03:00
cv_destroy(&tx->tx_cpu[c].tc_cv[i]);
list_destroy(&tx->tx_cpu[c].tc_callbacks[i]);
}
2008-11-20 23:01:55 +03:00
}
if (tx->tx_commit_cb_taskq != NULL)
taskq_destroy(tx->tx_commit_cb_taskq);
vmem_free(tx->tx_cpu, max_ncpus * sizeof (tx_cpu_t));
2008-11-20 23:01:55 +03:00
bzero(tx, sizeof (tx_state_t));
}
/*
* Start syncing transaction groups.
*/
void
txg_sync_start(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
mutex_enter(&tx->tx_sync_lock);
dprintf("pool %p\n", dp);
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT0(tx->tx_threads);
2008-11-20 23:01:55 +03:00
tx->tx_threads = 2;
tx->tx_quiesce_thread = thread_create(NULL, 0, txg_quiesce_thread,
Align thread priority with Linux defaults Under Linux filesystem threads responsible for handling I/O are normally created with the maximum priority. Non-I/O filesystem processes run with the default priority. ZFS should adopt the same priority scheme under Linux to maintain good performance and so that it will complete fairly when other Linux filesystems are active. The priorities have been updated to the following: $ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta' - TS 10743 19 -20 [spl_kmem_cache] - TS 10744 19 -20 [spl_system_task] - TS 10745 19 -20 [spl_dynamic_tas] - TS 10764 19 0 [dbu_evict] - TS 10765 19 0 [arc_prune] - TS 10766 19 0 [arc_reclaim] - TS 10767 19 0 [arc_user_evicts] - TS 10768 19 0 [l2arc_feed] - TS 10769 39 0 [z_unmount] - TS 10770 39 -20 [zvol] - TS 11011 39 -20 [z_null_iss] - TS 11012 39 -20 [z_null_int] - TS 11013 39 -20 [z_rd_iss] - TS 11014 39 -20 [z_rd_int_0] - TS 11022 38 -19 [z_wr_iss] - TS 11023 39 -20 [z_wr_iss_h] - TS 11024 39 -20 [z_wr_int_0] - TS 11032 39 -20 [z_wr_int_h] - TS 11033 39 -20 [z_fr_iss_0] - TS 11041 39 -20 [z_fr_int] - TS 11042 39 -20 [z_cl_iss] - TS 11043 39 -20 [z_cl_int] - TS 11044 39 -20 [z_ioctl_iss] - TS 11045 39 -20 [z_ioctl_int] - TS 11046 39 -20 [metaslab_group_] - TS 11050 19 0 [z_iput] - TS 11121 38 -19 [z_wr_iss] Note that under Linux the meaning of a processes priority is inverted with respect to illumos. High values on Linux indicate a _low_ priority while high value on illumos indicate a _high_ priority. In order to preserve the logical meaning of the minclsyspri and maxclsyspri macros when they are used by the illumos wrapper functions their values have been inverted. This way when changes are merged from upstream illumos we won't need to remember to invert the macro. It could also lead to confusion. This patch depends on https://github.com/zfsonlinux/spl/pull/466. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3607
2015-07-24 20:08:31 +03:00
dp, 0, &p0, TS_RUN, defclsyspri);
2008-11-20 23:01:55 +03:00
/*
* The sync thread can need a larger-than-default stack size on
* 32-bit x86. This is due in part to nested pools and
* scrub_visitbp() recursion.
*/
tx->tx_sync_thread = thread_create(NULL, 0, txg_sync_thread,
Align thread priority with Linux defaults Under Linux filesystem threads responsible for handling I/O are normally created with the maximum priority. Non-I/O filesystem processes run with the default priority. ZFS should adopt the same priority scheme under Linux to maintain good performance and so that it will complete fairly when other Linux filesystems are active. The priorities have been updated to the following: $ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta' - TS 10743 19 -20 [spl_kmem_cache] - TS 10744 19 -20 [spl_system_task] - TS 10745 19 -20 [spl_dynamic_tas] - TS 10764 19 0 [dbu_evict] - TS 10765 19 0 [arc_prune] - TS 10766 19 0 [arc_reclaim] - TS 10767 19 0 [arc_user_evicts] - TS 10768 19 0 [l2arc_feed] - TS 10769 39 0 [z_unmount] - TS 10770 39 -20 [zvol] - TS 11011 39 -20 [z_null_iss] - TS 11012 39 -20 [z_null_int] - TS 11013 39 -20 [z_rd_iss] - TS 11014 39 -20 [z_rd_int_0] - TS 11022 38 -19 [z_wr_iss] - TS 11023 39 -20 [z_wr_iss_h] - TS 11024 39 -20 [z_wr_int_0] - TS 11032 39 -20 [z_wr_int_h] - TS 11033 39 -20 [z_fr_iss_0] - TS 11041 39 -20 [z_fr_int] - TS 11042 39 -20 [z_cl_iss] - TS 11043 39 -20 [z_cl_int] - TS 11044 39 -20 [z_ioctl_iss] - TS 11045 39 -20 [z_ioctl_int] - TS 11046 39 -20 [metaslab_group_] - TS 11050 19 0 [z_iput] - TS 11121 38 -19 [z_wr_iss] Note that under Linux the meaning of a processes priority is inverted with respect to illumos. High values on Linux indicate a _low_ priority while high value on illumos indicate a _high_ priority. In order to preserve the logical meaning of the minclsyspri and maxclsyspri macros when they are used by the illumos wrapper functions their values have been inverted. This way when changes are merged from upstream illumos we won't need to remember to invert the macro. It could also lead to confusion. This patch depends on https://github.com/zfsonlinux/spl/pull/466. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3607
2015-07-24 20:08:31 +03:00
dp, 0, &p0, TS_RUN, defclsyspri);
2008-11-20 23:01:55 +03:00
mutex_exit(&tx->tx_sync_lock);
}
static void
txg_thread_enter(tx_state_t *tx, callb_cpr_t *cpr)
{
CALLB_CPR_INIT(cpr, &tx->tx_sync_lock, callb_generic_cpr, FTAG);
mutex_enter(&tx->tx_sync_lock);
}
static void
txg_thread_exit(tx_state_t *tx, callb_cpr_t *cpr, kthread_t **tpp)
{
ASSERT(*tpp != NULL);
*tpp = NULL;
tx->tx_threads--;
cv_broadcast(&tx->tx_exit_cv);
CALLB_CPR_EXIT(cpr); /* drops &tx->tx_sync_lock */
thread_exit();
}
static void
txg_thread_wait(tx_state_t *tx, callb_cpr_t *cpr, kcondvar_t *cv, clock_t time)
2008-11-20 23:01:55 +03:00
{
CALLB_CPR_SAFE_BEGIN(cpr);
if (time) {
(void) cv_timedwait_idle(cv, &tx->tx_sync_lock,
ddi_get_lbolt() + time);
} else {
cv_wait_idle(cv, &tx->tx_sync_lock);
}
2008-11-20 23:01:55 +03:00
CALLB_CPR_SAFE_END(cpr, &tx->tx_sync_lock);
}
/*
* Stop syncing transaction groups.
*/
void
txg_sync_stop(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
dprintf("pool %p\n", dp);
/*
* Finish off any work in progress.
*/
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT3U(tx->tx_threads, ==, 2);
/*
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 20:11:49 +03:00
* We need to ensure that we've vacated the deferred metaslab trees.
*/
txg_wait_synced(dp, tx->tx_open_txg + TXG_DEFER_SIZE);
2008-11-20 23:01:55 +03:00
/*
* Wake all sync threads and wait for them to die.
*/
mutex_enter(&tx->tx_sync_lock);
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT3U(tx->tx_threads, ==, 2);
2008-11-20 23:01:55 +03:00
tx->tx_exiting = 1;
cv_broadcast(&tx->tx_quiesce_more_cv);
cv_broadcast(&tx->tx_quiesce_done_cv);
cv_broadcast(&tx->tx_sync_more_cv);
while (tx->tx_threads != 0)
cv_wait(&tx->tx_exit_cv, &tx->tx_sync_lock);
tx->tx_exiting = 0;
mutex_exit(&tx->tx_sync_lock);
}
/*
* Get a handle on the currently open txg and keep it open.
*
* The txg is guaranteed to stay open until txg_rele_to_quiesce() is called for
* the handle. Once txg_rele_to_quiesce() has been called, the txg stays
* in quiescing state until txg_rele_to_sync() is called for the handle.
*
* It is guaranteed that subsequent calls return monotonically increasing
* txgs for the same dsl_pool_t. Of course this is not strong monotonicity,
* because the same txg can be returned multiple times in a row. This
* guarantee holds both for subsequent calls from one thread and for multiple
* threads. For example, it is impossible to observe the following sequence
* of events:
*
* Thread 1 Thread 2
*
* 1 <- txg_hold_open(P, ...)
* 2 <- txg_hold_open(P, ...)
* 1 <- txg_hold_open(P, ...)
*
*/
2008-11-20 23:01:55 +03:00
uint64_t
txg_hold_open(dsl_pool_t *dp, txg_handle_t *th)
{
tx_state_t *tx = &dp->dp_tx;
tx_cpu_t *tc;
2008-11-20 23:01:55 +03:00
uint64_t txg;
/*
* It appears the processor id is simply used as a "random"
* number to index into the array, and there isn't any other
* significance to the chosen tx_cpu. Because.. Why not use
* the current cpu to index into the array?
*/
tc = &tx->tx_cpu[CPU_SEQID_UNSTABLE];
mutex_enter(&tc->tc_open_lock);
2008-11-20 23:01:55 +03:00
txg = tx->tx_open_txg;
mutex_enter(&tc->tc_lock);
2008-11-20 23:01:55 +03:00
tc->tc_count[txg & TXG_MASK]++;
mutex_exit(&tc->tc_lock);
2008-11-20 23:01:55 +03:00
th->th_cpu = tc;
th->th_txg = txg;
return (txg);
}
void
txg_rele_to_quiesce(txg_handle_t *th)
{
tx_cpu_t *tc = th->th_cpu;
ASSERT(!MUTEX_HELD(&tc->tc_lock));
mutex_exit(&tc->tc_open_lock);
2008-11-20 23:01:55 +03:00
}
void
txg_register_callbacks(txg_handle_t *th, list_t *tx_callbacks)
{
tx_cpu_t *tc = th->th_cpu;
int g = th->th_txg & TXG_MASK;
mutex_enter(&tc->tc_lock);
list_move_tail(&tc->tc_callbacks[g], tx_callbacks);
mutex_exit(&tc->tc_lock);
}
2008-11-20 23:01:55 +03:00
void
txg_rele_to_sync(txg_handle_t *th)
{
tx_cpu_t *tc = th->th_cpu;
int g = th->th_txg & TXG_MASK;
mutex_enter(&tc->tc_lock);
ASSERT(tc->tc_count[g] != 0);
if (--tc->tc_count[g] == 0)
cv_broadcast(&tc->tc_cv[g]);
mutex_exit(&tc->tc_lock);
th->th_cpu = NULL; /* defensive */
}
/*
* Blocks until all transactions in the group are committed.
*
* On return, the transaction group has reached a stable state in which it can
* then be passed off to the syncing context.
*/
2008-11-20 23:01:55 +03:00
static void
txg_quiesce(dsl_pool_t *dp, uint64_t txg)
{
tx_state_t *tx = &dp->dp_tx;
uint64_t tx_open_time;
2008-11-20 23:01:55 +03:00
int g = txg & TXG_MASK;
int c;
/*
* Grab all tc_open_locks so nobody else can get into this txg.
2008-11-20 23:01:55 +03:00
*/
for (c = 0; c < max_ncpus; c++)
mutex_enter(&tx->tx_cpu[c].tc_open_lock);
2008-11-20 23:01:55 +03:00
ASSERT(txg == tx->tx_open_txg);
tx->tx_open_txg++;
tx->tx_open_time = tx_open_time = gethrtime();
DTRACE_PROBE2(txg__quiescing, dsl_pool_t *, dp, uint64_t, txg);
DTRACE_PROBE2(txg__opened, dsl_pool_t *, dp, uint64_t, tx->tx_open_txg);
/*
* Now that we've incremented tx_open_txg, we can let threads
* enter the next transaction group.
*/
for (c = 0; c < max_ncpus; c++)
mutex_exit(&tx->tx_cpu[c].tc_open_lock);
spa_txg_history_set(dp->dp_spa, txg, TXG_STATE_OPEN, tx_open_time);
spa_txg_history_add(dp->dp_spa, txg + 1, tx_open_time);
2008-11-20 23:01:55 +03:00
/*
* Quiesce the transaction group by waiting for everyone to
* call txg_rele_to_sync() for their open transaction handles.
2008-11-20 23:01:55 +03:00
*/
for (c = 0; c < max_ncpus; c++) {
tx_cpu_t *tc = &tx->tx_cpu[c];
mutex_enter(&tc->tc_lock);
while (tc->tc_count[g] != 0)
cv_wait(&tc->tc_cv[g], &tc->tc_lock);
mutex_exit(&tc->tc_lock);
}
spa_txg_history_set(dp->dp_spa, txg, TXG_STATE_QUIESCED, gethrtime());
2008-11-20 23:01:55 +03:00
}
static void
txg_do_callbacks(list_t *cb_list)
{
dmu_tx_do_callbacks(cb_list, 0);
list_destroy(cb_list);
kmem_free(cb_list, sizeof (list_t));
}
/*
* Dispatch the commit callbacks registered on this txg to worker threads.
*
* If no callbacks are registered for a given TXG, nothing happens.
* This function creates a taskq for the associated pool, if needed.
*/
static void
txg_dispatch_callbacks(dsl_pool_t *dp, uint64_t txg)
{
int c;
tx_state_t *tx = &dp->dp_tx;
list_t *cb_list;
for (c = 0; c < max_ncpus; c++) {
tx_cpu_t *tc = &tx->tx_cpu[c];
/*
* No need to lock tx_cpu_t at this point, since this can
* only be called once a txg has been synced.
*/
int g = txg & TXG_MASK;
if (list_is_empty(&tc->tc_callbacks[g]))
continue;
if (tx->tx_commit_cb_taskq == NULL) {
/*
* Commit callback taskq hasn't been created yet.
*/
tx->tx_commit_cb_taskq = taskq_create("tx_commit_cb",
100, defclsyspri, boot_ncpus, boot_ncpus * 2,
TASKQ_PREPOPULATE | TASKQ_DYNAMIC |
TASKQ_THREADS_CPU_PCT);
}
cb_list = kmem_alloc(sizeof (list_t), KM_SLEEP);
list_create(cb_list, sizeof (dmu_tx_callback_t),
offsetof(dmu_tx_callback_t, dcb_node));
list_move_tail(cb_list, &tc->tc_callbacks[g]);
(void) taskq_dispatch(tx->tx_commit_cb_taskq, (task_func_t *)
txg_do_callbacks, cb_list, TQ_SLEEP);
}
}
/*
* Wait for pending commit callbacks of already-synced transactions to finish
* processing.
* Calling this function from within a commit callback will deadlock.
*/
void
txg_wait_callbacks(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
if (tx->tx_commit_cb_taskq != NULL)
taskq_wait_outstanding(tx->tx_commit_cb_taskq, 0);
}
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
static boolean_t
txg_is_quiescing(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
ASSERT(MUTEX_HELD(&tx->tx_sync_lock));
return (tx->tx_quiescing_txg != 0);
}
static boolean_t
txg_has_quiesced_to_sync(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
ASSERT(MUTEX_HELD(&tx->tx_sync_lock));
return (tx->tx_quiesced_txg != 0);
}
2008-11-20 23:01:55 +03:00
static void
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 18:51:44 +03:00
txg_sync_thread(void *arg)
2008-11-20 23:01:55 +03:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
dsl_pool_t *dp = arg;
spa_t *spa = dp->dp_spa;
2008-11-20 23:01:55 +03:00
tx_state_t *tx = &dp->dp_tx;
callb_cpr_t cpr;
clock_t start, delta;
2008-11-20 23:01:55 +03:00
(void) spl_fstrans_mark();
2008-11-20 23:01:55 +03:00
txg_thread_enter(tx, &cpr);
start = delta = 0;
for (;;) {
clock_t timeout = zfs_txg_timeout * hz;
clock_t timer;
uint64_t txg;
2008-11-20 23:01:55 +03:00
/*
* We sync when we're scanning, there's someone waiting
* on us, or the quiesce thread has handed off a txg to
* us, or we have reached our timeout.
2008-11-20 23:01:55 +03:00
*/
timer = (delta >= timeout ? 0 : timeout - delta);
while (!dsl_scan_active(dp->dp_scan) &&
!tx->tx_exiting && timer > 0 &&
2008-11-20 23:01:55 +03:00
tx->tx_synced_txg >= tx->tx_sync_txg_waiting &&
!txg_has_quiesced_to_sync(dp)) {
2008-11-20 23:01:55 +03:00
dprintf("waiting; tx_synced=%llu waiting=%llu dp=%p\n",
(u_longlong_t)tx->tx_synced_txg,
(u_longlong_t)tx->tx_sync_txg_waiting, dp);
2008-11-20 23:01:55 +03:00
txg_thread_wait(tx, &cpr, &tx->tx_sync_more_cv, timer);
delta = ddi_get_lbolt() - start;
2008-11-20 23:01:55 +03:00
timer = (delta > timeout ? 0 : timeout - delta);
}
/*
* Wait until the quiesce thread hands off a txg to us,
* prompting it to do so if necessary.
*/
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
while (!tx->tx_exiting && !txg_has_quiesced_to_sync(dp)) {
if (txg_is_quiescing(dp)) {
txg_thread_wait(tx, &cpr,
&tx->tx_quiesce_done_cv, 0);
continue;
}
2008-11-20 23:01:55 +03:00
if (tx->tx_quiesce_txg_waiting < tx->tx_open_txg+1)
tx->tx_quiesce_txg_waiting = tx->tx_open_txg+1;
cv_broadcast(&tx->tx_quiesce_more_cv);
txg_thread_wait(tx, &cpr, &tx->tx_quiesce_done_cv, 0);
}
if (tx->tx_exiting)
2008-11-20 23:01:55 +03:00
txg_thread_exit(tx, &cpr, &tx->tx_sync_thread);
/*
* Consume the quiesced txg which has been handed off to
* us. This may cause the quiescing thread to now be
* able to quiesce another txg, so we must signal it.
*/
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
ASSERT(tx->tx_quiesced_txg != 0);
2008-11-20 23:01:55 +03:00
txg = tx->tx_quiesced_txg;
tx->tx_quiesced_txg = 0;
tx->tx_syncing_txg = txg;
DTRACE_PROBE2(txg__syncing, dsl_pool_t *, dp, uint64_t, txg);
2008-11-20 23:01:55 +03:00
cv_broadcast(&tx->tx_quiesce_more_cv);
dprintf("txg=%llu quiesce_txg=%llu sync_txg=%llu\n",
(u_longlong_t)txg, (u_longlong_t)tx->tx_quiesce_txg_waiting,
(u_longlong_t)tx->tx_sync_txg_waiting);
2008-11-20 23:01:55 +03:00
mutex_exit(&tx->tx_sync_lock);
txg_stat_t *ts = spa_txg_history_init_io(spa, txg, dp);
start = ddi_get_lbolt();
spa_sync(spa, txg);
delta = ddi_get_lbolt() - start;
spa_txg_history_fini_io(spa, ts);
2008-11-20 23:01:55 +03:00
mutex_enter(&tx->tx_sync_lock);
tx->tx_synced_txg = txg;
tx->tx_syncing_txg = 0;
DTRACE_PROBE2(txg__synced, dsl_pool_t *, dp, uint64_t, txg);
2008-11-20 23:01:55 +03:00
cv_broadcast(&tx->tx_sync_done_cv);
/*
* Dispatch commit callbacks to worker threads.
*/
txg_dispatch_callbacks(dp, txg);
2008-11-20 23:01:55 +03:00
}
}
static void
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 18:51:44 +03:00
txg_quiesce_thread(void *arg)
2008-11-20 23:01:55 +03:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
dsl_pool_t *dp = arg;
2008-11-20 23:01:55 +03:00
tx_state_t *tx = &dp->dp_tx;
callb_cpr_t cpr;
txg_thread_enter(tx, &cpr);
for (;;) {
uint64_t txg;
/*
* We quiesce when there's someone waiting on us.
* However, we can only have one txg in "quiescing" or
* "quiesced, waiting to sync" state. So we wait until
* the "quiesced, waiting to sync" txg has been consumed
* by the sync thread.
*/
while (!tx->tx_exiting &&
(tx->tx_open_txg >= tx->tx_quiesce_txg_waiting ||
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
txg_has_quiesced_to_sync(dp)))
2008-11-20 23:01:55 +03:00
txg_thread_wait(tx, &cpr, &tx->tx_quiesce_more_cv, 0);
if (tx->tx_exiting)
txg_thread_exit(tx, &cpr, &tx->tx_quiesce_thread);
txg = tx->tx_open_txg;
dprintf("txg=%llu quiesce_txg=%llu sync_txg=%llu\n",
(u_longlong_t)txg,
(u_longlong_t)tx->tx_quiesce_txg_waiting,
(u_longlong_t)tx->tx_sync_txg_waiting);
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
tx->tx_quiescing_txg = txg;
2008-11-20 23:01:55 +03:00
mutex_exit(&tx->tx_sync_lock);
txg_quiesce(dp, txg);
mutex_enter(&tx->tx_sync_lock);
/*
* Hand this txg off to the sync thread.
*/
dprintf("quiesce done, handing off txg %llu\n",
(u_longlong_t)txg);
OpenZFS 9464 - txg_kick() fails to see that we are quiescing txg_kick() fails to see that we are quiescing, forcing transactions to their next stages without leaving them accumulate changes Creating a fragmented pool in a DCenter VM and continuously writing to it with multiple instances of randwritecomp, we get the following output from txg.d: 0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms 0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms 0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms 0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms 0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms 0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms 0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms 0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms 0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms 0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms 0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms 0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms 4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms 0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms 0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms 0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms 0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms 0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms The TXGs that are getting synced and don't have lots of changes are pushed by txg_kick() which basically forces the current open txg to get to the quiesced state: if (tx->tx_syncing_txg == 0 && tx->tx_quiesce_txg_waiting <= tx->tx_open_txg && tx->tx_sync_txg_waiting <= tx->tx_synced_txg && tx->tx_quiesced_txg <= tx->tx_synced_txg) { tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1; cv_broadcast(&tx->tx_quiesce_more_cv); } The problem is that the above code doesn't check if we are currently quiescing anything (only if a quiesce or a sync has been requested, ..etc) so the following scenario can happen: 1] We have an open txg A that had enough dirty data (more than zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened a new txg B. No txg is currently being synced. 2] Immediately after the opening of B, txg_kick() was run by some other write (and because of A's dirty data) and saw that we are not currently syncing any txg and no one has requested quiescing so it requests one by bumping tx_quiesce_txg_waiting and broadcasts the quiesce thread. 3] The quiesce thread just passed txg A to be synced and sees that a quiescing request has been sent to it so it immediately grabs B without letting it gather enough data, putting it in a quiesced state and opening a new txg C. In this scenario txg B, is an example of how the entries of interest show up in the txg.d output. Ideally we would like txg_kick() to get triggered only when we are sure that we are not syncing AND not quiescing any txg. This way we can kick an open TXG to the quiescing state when we are sure that there is nothing going on and we would benefit from the different states running concurrently. Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9464 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b Closes #7587
2017-12-05 20:45:46 +03:00
tx->tx_quiescing_txg = 0;
2008-11-20 23:01:55 +03:00
tx->tx_quiesced_txg = txg;
DTRACE_PROBE2(txg__quiesced, dsl_pool_t *, dp, uint64_t, txg);
2008-11-20 23:01:55 +03:00
cv_broadcast(&tx->tx_sync_more_cv);
cv_broadcast(&tx->tx_quiesce_done_cv);
}
}
/*
* Delay this thread by delay nanoseconds if we are still in the open
* transaction group and there is already a waiting txg quiescing or quiesced.
* Abort the delay if this txg stalls or enters the quiescing state.
2008-11-20 23:01:55 +03:00
*/
void
txg_delay(dsl_pool_t *dp, uint64_t txg, hrtime_t delay, hrtime_t resolution)
2008-11-20 23:01:55 +03:00
{
tx_state_t *tx = &dp->dp_tx;
hrtime_t start = gethrtime();
2008-11-20 23:01:55 +03:00
/* don't delay if this txg could transition to quiescing immediately */
2008-11-20 23:01:55 +03:00
if (tx->tx_open_txg > txg ||
tx->tx_syncing_txg == txg-1 || tx->tx_synced_txg == txg-1)
return;
mutex_enter(&tx->tx_sync_lock);
if (tx->tx_open_txg > txg || tx->tx_synced_txg == txg-1) {
mutex_exit(&tx->tx_sync_lock);
return;
}
while (gethrtime() - start < delay &&
tx->tx_syncing_txg < txg-1 && !txg_stalled(dp)) {
(void) cv_timedwait_hires(&tx->tx_quiesce_more_cv,
&tx->tx_sync_lock, delay, resolution, 0);
}
2008-11-20 23:01:55 +03:00
DMU_TX_STAT_BUMP(dmu_tx_delay);
2008-11-20 23:01:55 +03:00
mutex_exit(&tx->tx_sync_lock);
}
OpenZFS 9425 - channel programs can be interrupted Problem Statement ================= ZFS Channel program scripts currently require a timeout, so that hung or long-running scripts return a timeout error instead of causing ZFS to get wedged. This limit can currently be set up to 100 million Lua instructions. Even with a limit in place, it would be desirable to have a sys admin (support engineer) be able to cancel a script that is taking a long time. Proposed Solution ================= Make it possible to abort a channel program by sending an interrupt signal.In the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to catch the signal. Once a signal is encountered, the dsl_sync_task function can install a Lua hook that will get called before the Lua interpreter executes a new line of code. The dsl_sync_task can resume with a standard txg_wait_sync call and wait for the txg to complete. Meanwhile, the hook will abort the script and indicate that the channel program was canceled. The kernel returns a EINTR to indicate that the channel program run was canceled. Porting notes: Added missing return value from cv_wait_sig() Authored by: Don Brady <don.brady@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> Signed-off-by: Don Brady <don.brady@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9425 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926 Closes #8904
2019-06-23 02:51:46 +03:00
static boolean_t
txg_wait_synced_impl(dsl_pool_t *dp, uint64_t txg, boolean_t wait_sig)
2008-11-20 23:01:55 +03:00
{
tx_state_t *tx = &dp->dp_tx;
ASSERT(!dsl_pool_config_held(dp));
2008-11-20 23:01:55 +03:00
mutex_enter(&tx->tx_sync_lock);
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT3U(tx->tx_threads, ==, 2);
2008-11-20 23:01:55 +03:00
if (txg == 0)
txg = tx->tx_open_txg + TXG_DEFER_SIZE;
2008-11-20 23:01:55 +03:00
if (tx->tx_sync_txg_waiting < txg)
tx->tx_sync_txg_waiting = txg;
dprintf("txg=%llu quiesce_txg=%llu sync_txg=%llu\n",
(u_longlong_t)txg, (u_longlong_t)tx->tx_quiesce_txg_waiting,
(u_longlong_t)tx->tx_sync_txg_waiting);
2008-11-20 23:01:55 +03:00
while (tx->tx_synced_txg < txg) {
dprintf("broadcasting sync more "
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
"tx_synced=%llu waiting=%llu dp=%px\n",
(u_longlong_t)tx->tx_synced_txg,
(u_longlong_t)tx->tx_sync_txg_waiting, dp);
2008-11-20 23:01:55 +03:00
cv_broadcast(&tx->tx_sync_more_cv);
OpenZFS 9425 - channel programs can be interrupted Problem Statement ================= ZFS Channel program scripts currently require a timeout, so that hung or long-running scripts return a timeout error instead of causing ZFS to get wedged. This limit can currently be set up to 100 million Lua instructions. Even with a limit in place, it would be desirable to have a sys admin (support engineer) be able to cancel a script that is taking a long time. Proposed Solution ================= Make it possible to abort a channel program by sending an interrupt signal.In the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to catch the signal. Once a signal is encountered, the dsl_sync_task function can install a Lua hook that will get called before the Lua interpreter executes a new line of code. The dsl_sync_task can resume with a standard txg_wait_sync call and wait for the txg to complete. Meanwhile, the hook will abort the script and indicate that the channel program was canceled. The kernel returns a EINTR to indicate that the channel program run was canceled. Porting notes: Added missing return value from cv_wait_sig() Authored by: Don Brady <don.brady@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> Signed-off-by: Don Brady <don.brady@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9425 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926 Closes #8904
2019-06-23 02:51:46 +03:00
if (wait_sig) {
/*
* Condition wait here but stop if the thread receives a
* signal. The caller may call txg_wait_synced*() again
* to resume waiting for this txg.
*/
if (cv_wait_io_sig(&tx->tx_sync_done_cv,
&tx->tx_sync_lock) == 0) {
mutex_exit(&tx->tx_sync_lock);
return (B_TRUE);
}
} else {
cv_wait_io(&tx->tx_sync_done_cv, &tx->tx_sync_lock);
}
2008-11-20 23:01:55 +03:00
}
mutex_exit(&tx->tx_sync_lock);
OpenZFS 9425 - channel programs can be interrupted Problem Statement ================= ZFS Channel program scripts currently require a timeout, so that hung or long-running scripts return a timeout error instead of causing ZFS to get wedged. This limit can currently be set up to 100 million Lua instructions. Even with a limit in place, it would be desirable to have a sys admin (support engineer) be able to cancel a script that is taking a long time. Proposed Solution ================= Make it possible to abort a channel program by sending an interrupt signal.In the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to catch the signal. Once a signal is encountered, the dsl_sync_task function can install a Lua hook that will get called before the Lua interpreter executes a new line of code. The dsl_sync_task can resume with a standard txg_wait_sync call and wait for the txg to complete. Meanwhile, the hook will abort the script and indicate that the channel program was canceled. The kernel returns a EINTR to indicate that the channel program run was canceled. Porting notes: Added missing return value from cv_wait_sig() Authored by: Don Brady <don.brady@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> Signed-off-by: Don Brady <don.brady@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9425 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926 Closes #8904
2019-06-23 02:51:46 +03:00
return (B_FALSE);
}
void
txg_wait_synced(dsl_pool_t *dp, uint64_t txg)
{
VERIFY0(txg_wait_synced_impl(dp, txg, B_FALSE));
}
/*
* Similar to a txg_wait_synced but it can be interrupted from a signal.
* Returns B_TRUE if the thread was signaled while waiting.
*/
boolean_t
txg_wait_synced_sig(dsl_pool_t *dp, uint64_t txg)
{
return (txg_wait_synced_impl(dp, txg, B_TRUE));
2008-11-20 23:01:55 +03:00
}
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
/*
* Wait for the specified open transaction group. Set should_quiesce
* when the current open txg should be quiesced immediately.
*/
2008-11-20 23:01:55 +03:00
void
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
txg_wait_open(dsl_pool_t *dp, uint64_t txg, boolean_t should_quiesce)
2008-11-20 23:01:55 +03:00
{
tx_state_t *tx = &dp->dp_tx;
ASSERT(!dsl_pool_config_held(dp));
2008-11-20 23:01:55 +03:00
mutex_enter(&tx->tx_sync_lock);
OpenZFS 8585 - improve batching done in zil_commit() Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Prakash Surya <prakash.surya@delphix.com> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
2017-12-05 20:39:16 +03:00
ASSERT3U(tx->tx_threads, ==, 2);
2008-11-20 23:01:55 +03:00
if (txg == 0)
txg = tx->tx_open_txg + 1;
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
if (tx->tx_quiesce_txg_waiting < txg && should_quiesce)
2008-11-20 23:01:55 +03:00
tx->tx_quiesce_txg_waiting = txg;
dprintf("txg=%llu quiesce_txg=%llu sync_txg=%llu\n",
(u_longlong_t)txg, (u_longlong_t)tx->tx_quiesce_txg_waiting,
(u_longlong_t)tx->tx_sync_txg_waiting);
2008-11-20 23:01:55 +03:00
while (tx->tx_open_txg < txg) {
cv_broadcast(&tx->tx_quiesce_more_cv);
/*
* Callers setting should_quiesce will use cv_wait_io() and
* be accounted for as iowait time. Otherwise, the caller is
* understood to be idle and cv_wait_sig() is used to prevent
* incorrectly inflating the system load average.
*/
if (should_quiesce == B_TRUE) {
cv_wait_io(&tx->tx_quiesce_done_cv, &tx->tx_sync_lock);
} else {
cv_wait_idle(&tx->tx_quiesce_done_cv,
&tx->tx_sync_lock);
}
2008-11-20 23:01:55 +03:00
}
mutex_exit(&tx->tx_sync_lock);
}
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
/*
* Pass in the txg number that should be synced.
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
*/
void
txg_kick(dsl_pool_t *dp, uint64_t txg)
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
{
tx_state_t *tx = &dp->dp_tx;
ASSERT(!dsl_pool_config_held(dp));
if (tx->tx_sync_txg_waiting >= txg)
return;
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
mutex_enter(&tx->tx_sync_lock);
if (tx->tx_sync_txg_waiting < txg) {
tx->tx_sync_txg_waiting = txg;
cv_broadcast(&tx->tx_sync_more_cv);
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
}
mutex_exit(&tx->tx_sync_lock);
}
boolean_t
2008-11-20 23:01:55 +03:00
txg_stalled(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
return (tx->tx_quiesce_txg_waiting > tx->tx_open_txg);
}
boolean_t
txg_sync_waiting(dsl_pool_t *dp)
{
tx_state_t *tx = &dp->dp_tx;
return (tx->tx_syncing_txg <= tx->tx_sync_txg_waiting ||
tx->tx_quiesced_txg != 0);
}
/*
* Verify that this txg is active (open, quiescing, syncing). Non-active
* txg's should not be manipulated.
*/
#ifdef ZFS_DEBUG
void
txg_verify(spa_t *spa, uint64_t txg)
{
dsl_pool_t *dp __maybe_unused = spa_get_dsl(spa);
if (txg <= TXG_INITIAL || txg == ZILTEST_TXG)
return;
ASSERT3U(txg, <=, dp->dp_tx.tx_open_txg);
ASSERT3U(txg, >=, dp->dp_tx.tx_synced_txg);
ASSERT3U(txg, >=, dp->dp_tx.tx_open_txg - TXG_CONCURRENT_STATES);
}
#endif
2008-11-20 23:01:55 +03:00
/*
* Per-txg object lists.
*/
void
txg_list_create(txg_list_t *tl, spa_t *spa, size_t offset)
2008-11-20 23:01:55 +03:00
{
int t;
mutex_init(&tl->tl_lock, NULL, MUTEX_DEFAULT, NULL);
tl->tl_offset = offset;
tl->tl_spa = spa;
2008-11-20 23:01:55 +03:00
for (t = 0; t < TXG_SIZE; t++)
tl->tl_head[t] = NULL;
}
static boolean_t
txg_list_empty_impl(txg_list_t *tl, uint64_t txg)
{
ASSERT(MUTEX_HELD(&tl->tl_lock));
TXG_VERIFY(tl->tl_spa, txg);
return (tl->tl_head[txg & TXG_MASK] == NULL);
}
boolean_t
txg_list_empty(txg_list_t *tl, uint64_t txg)
{
mutex_enter(&tl->tl_lock);
boolean_t ret = txg_list_empty_impl(tl, txg);
mutex_exit(&tl->tl_lock);
return (ret);
}
2008-11-20 23:01:55 +03:00
void
txg_list_destroy(txg_list_t *tl)
{
int t;
mutex_enter(&tl->tl_lock);
2008-11-20 23:01:55 +03:00
for (t = 0; t < TXG_SIZE; t++)
ASSERT(txg_list_empty_impl(tl, t));
mutex_exit(&tl->tl_lock);
2008-11-20 23:01:55 +03:00
mutex_destroy(&tl->tl_lock);
}
/*
* Returns true if all txg lists are empty.
*
* Warning: this is inherently racy (an item could be added immediately
* after this function returns).
*/
boolean_t
txg_all_lists_empty(txg_list_t *tl)
{
mutex_enter(&tl->tl_lock);
for (int i = 0; i < TXG_SIZE; i++) {
if (!txg_list_empty_impl(tl, i)) {
mutex_exit(&tl->tl_lock);
return (B_FALSE);
}
}
mutex_exit(&tl->tl_lock);
return (B_TRUE);
}
2008-11-20 23:01:55 +03:00
/*
* Add an entry to the list (unless it's already on the list).
* Returns B_TRUE if it was actually added.
2008-11-20 23:01:55 +03:00
*/
boolean_t
2008-11-20 23:01:55 +03:00
txg_list_add(txg_list_t *tl, void *p, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn = (txg_node_t *)((char *)p + tl->tl_offset);
boolean_t add;
2008-11-20 23:01:55 +03:00
TXG_VERIFY(tl->tl_spa, txg);
2008-11-20 23:01:55 +03:00
mutex_enter(&tl->tl_lock);
add = (tn->tn_member[t] == 0);
if (add) {
2008-11-20 23:01:55 +03:00
tn->tn_member[t] = 1;
tn->tn_next[t] = tl->tl_head[t];
tl->tl_head[t] = tn;
}
mutex_exit(&tl->tl_lock);
return (add);
2008-11-20 23:01:55 +03:00
}
/*
* Add an entry to the end of the list, unless it's already on the list.
* (walks list to find end)
* Returns B_TRUE if it was actually added.
*/
boolean_t
txg_list_add_tail(txg_list_t *tl, void *p, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn = (txg_node_t *)((char *)p + tl->tl_offset);
boolean_t add;
TXG_VERIFY(tl->tl_spa, txg);
mutex_enter(&tl->tl_lock);
add = (tn->tn_member[t] == 0);
if (add) {
txg_node_t **tp;
for (tp = &tl->tl_head[t]; *tp != NULL; tp = &(*tp)->tn_next[t])
continue;
tn->tn_member[t] = 1;
tn->tn_next[t] = NULL;
*tp = tn;
}
mutex_exit(&tl->tl_lock);
return (add);
}
2008-11-20 23:01:55 +03:00
/*
* Remove the head of the list and return it.
*/
void *
txg_list_remove(txg_list_t *tl, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn;
void *p = NULL;
TXG_VERIFY(tl->tl_spa, txg);
2008-11-20 23:01:55 +03:00
mutex_enter(&tl->tl_lock);
if ((tn = tl->tl_head[t]) != NULL) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ASSERT(tn->tn_member[t]);
ASSERT(tn->tn_next[t] == NULL || tn->tn_next[t]->tn_member[t]);
2008-11-20 23:01:55 +03:00
p = (char *)tn - tl->tl_offset;
tl->tl_head[t] = tn->tn_next[t];
tn->tn_next[t] = NULL;
tn->tn_member[t] = 0;
}
mutex_exit(&tl->tl_lock);
return (p);
}
/*
* Remove a specific item from the list and return it.
*/
void *
txg_list_remove_this(txg_list_t *tl, void *p, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn, **tp;
TXG_VERIFY(tl->tl_spa, txg);
2008-11-20 23:01:55 +03:00
mutex_enter(&tl->tl_lock);
for (tp = &tl->tl_head[t]; (tn = *tp) != NULL; tp = &tn->tn_next[t]) {
if ((char *)tn - tl->tl_offset == p) {
*tp = tn->tn_next[t];
tn->tn_next[t] = NULL;
tn->tn_member[t] = 0;
mutex_exit(&tl->tl_lock);
return (p);
}
}
mutex_exit(&tl->tl_lock);
return (NULL);
}
boolean_t
2008-11-20 23:01:55 +03:00
txg_list_member(txg_list_t *tl, void *p, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn = (txg_node_t *)((char *)p + tl->tl_offset);
TXG_VERIFY(tl->tl_spa, txg);
return (tn->tn_member[t] != 0);
2008-11-20 23:01:55 +03:00
}
/*
* Walk a txg list
2008-11-20 23:01:55 +03:00
*/
void *
txg_list_head(txg_list_t *tl, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn;
mutex_enter(&tl->tl_lock);
tn = tl->tl_head[t];
mutex_exit(&tl->tl_lock);
2008-11-20 23:01:55 +03:00
TXG_VERIFY(tl->tl_spa, txg);
2008-11-20 23:01:55 +03:00
return (tn == NULL ? NULL : (char *)tn - tl->tl_offset);
}
void *
txg_list_next(txg_list_t *tl, void *p, uint64_t txg)
{
int t = txg & TXG_MASK;
txg_node_t *tn = (txg_node_t *)((char *)p + tl->tl_offset);
TXG_VERIFY(tl->tl_spa, txg);
mutex_enter(&tl->tl_lock);
2008-11-20 23:01:55 +03:00
tn = tn->tn_next[t];
mutex_exit(&tl->tl_lock);
2008-11-20 23:01:55 +03:00
return (tn == NULL ? NULL : (char *)tn - tl->tl_offset);
}
EXPORT_SYMBOL(txg_init);
EXPORT_SYMBOL(txg_fini);
EXPORT_SYMBOL(txg_sync_start);
EXPORT_SYMBOL(txg_sync_stop);
EXPORT_SYMBOL(txg_hold_open);
EXPORT_SYMBOL(txg_rele_to_quiesce);
EXPORT_SYMBOL(txg_rele_to_sync);
EXPORT_SYMBOL(txg_register_callbacks);
EXPORT_SYMBOL(txg_delay);
EXPORT_SYMBOL(txg_wait_synced);
EXPORT_SYMBOL(txg_wait_open);
EXPORT_SYMBOL(txg_wait_callbacks);
EXPORT_SYMBOL(txg_stalled);
EXPORT_SYMBOL(txg_sync_waiting);
ZFS_MODULE_PARAM(zfs_txg, zfs_txg_, timeout, INT, ZMOD_RW,
"Max seconds worth of delta per txg");