mirror_zfs/module/os/linux/zfs/zfs_uio.c

335 lines
8.1 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/* All Rights Reserved */
/*
* University Copyright- Copyright (c) 1982, 1986, 1988
* The Regents of the University of California
* All Rights Reserved
*
* University Acknowledgment- Portions of this document are derived from
* software developed by the University of California, Berkeley, and its
* contributors.
*/
/*
* Copyright (c) 2015 by Chunwei Chen. All rights reserved.
*/
#ifdef _KERNEL
#include <sys/types.h>
#include <sys/uio_impl.h>
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 04:53:18 +03:00
#include <sys/sysmacros.h>
#include <sys/string.h>
#include <linux/kmap_compat.h>
#include <linux/uaccess.h>
/*
* Move "n" bytes at byte address "p"; "rw" indicates the direction
* of the move, and the I/O parameters are provided in "uio", which is
* update to reflect the data which was moved. Returns 0 on success or
* a non-zero errno on failure.
*/
static int
zfs_uiomove_iov(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{
const struct iovec *iov = uio->uio_iov;
size_t skip = uio->uio_skip;
ulong_t cnt;
while (n && uio->uio_resid) {
cnt = MIN(iov->iov_len - skip, n);
switch (uio->uio_segflg) {
case UIO_USERSPACE:
/*
* p = kernel data pointer
* iov->iov_base = user data pointer
*/
if (rw == UIO_READ) {
if (copy_to_user(iov->iov_base+skip, p, cnt))
return (EFAULT);
} else {
unsigned long b_left = 0;
if (uio->uio_fault_disable) {
#if defined(HAVE___COPY_FROM_USER_INATOMIC)
if (!zfs_access_ok(VERIFY_READ,
(iov->iov_base + skip), cnt)) {
return (EFAULT);
}
pagefault_disable();
b_left =
__copy_from_user_inatomic(p,
(iov->iov_base + skip), cnt);
pagefault_enable();
#else
return (EFAULT);
#endif
} else {
b_left =
copy_from_user(p,
(iov->iov_base + skip), cnt);
}
if (b_left > 0) {
unsigned long c_bytes =
cnt - b_left;
uio->uio_skip += c_bytes;
ASSERT3U(uio->uio_skip, <,
iov->iov_len);
uio->uio_resid -= c_bytes;
uio->uio_loffset += c_bytes;
return (EFAULT);
}
}
break;
case UIO_SYSSPACE:
if (rw == UIO_READ)
memcpy(iov->iov_base + skip, p, cnt);
else
memcpy(p, iov->iov_base + skip, cnt);
break;
default:
ASSERT(0);
}
skip += cnt;
if (skip == iov->iov_len) {
skip = 0;
uio->uio_iov = (++iov);
uio->uio_iovcnt--;
}
uio->uio_skip = skip;
uio->uio_resid -= cnt;
uio->uio_loffset += cnt;
p = (caddr_t)p + cnt;
n -= cnt;
}
return (0);
}
static int
zfs_uiomove_bvec(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{
const struct bio_vec *bv = uio->uio_bvec;
size_t skip = uio->uio_skip;
ulong_t cnt;
while (n && uio->uio_resid) {
void *paddr;
cnt = MIN(bv->bv_len - skip, n);
paddr = zfs_kmap_atomic(bv->bv_page);
if (rw == UIO_READ)
memcpy(paddr + bv->bv_offset + skip, p, cnt);
else
memcpy(p, paddr + bv->bv_offset + skip, cnt);
zfs_kunmap_atomic(paddr);
skip += cnt;
if (skip == bv->bv_len) {
skip = 0;
uio->uio_bvec = (++bv);
uio->uio_iovcnt--;
}
uio->uio_skip = skip;
uio->uio_resid -= cnt;
uio->uio_loffset += cnt;
p = (caddr_t)p + cnt;
n -= cnt;
}
return (0);
}
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#if defined(HAVE_VFS_IOV_ITER)
static int
zfs_uiomove_iter(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio,
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
boolean_t revert)
{
size_t cnt = MIN(n, uio->uio_resid);
if (uio->uio_skip)
iov_iter_advance(uio->uio_iter, uio->uio_skip);
if (rw == UIO_READ)
cnt = copy_to_iter(p, cnt, uio->uio_iter);
else
cnt = copy_from_iter(p, cnt, uio->uio_iter);
/*
* When operating on a full pipe no bytes are processed.
* In which case return EFAULT which is converted to EAGAIN
* by the kernel's generic_file_splice_read() function.
*/
if (cnt == 0)
return (EFAULT);
/*
* Revert advancing the uio_iter. This is set by zfs_uiocopy()
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
* to avoid consuming the uio and its iov_iter structure.
*/
if (revert)
iov_iter_revert(uio->uio_iter, cnt);
uio->uio_resid -= cnt;
uio->uio_loffset += cnt;
return (0);
}
#endif
int
zfs_uiomove(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
if (uio->uio_segflg == UIO_BVEC)
return (zfs_uiomove_bvec(p, n, rw, uio));
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#if defined(HAVE_VFS_IOV_ITER)
else if (uio->uio_segflg == UIO_ITER)
return (zfs_uiomove_iter(p, n, rw, uio, B_FALSE));
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#endif
else
return (zfs_uiomove_iov(p, n, rw, uio));
}
EXPORT_SYMBOL(zfs_uiomove);
/*
* Fault in the pages of the first n bytes specified by the uio structure.
* 1 byte in each page is touched and the uio struct is unmodified. Any
* error will terminate the process as this is only a best attempt to get
* the pages resident.
*/
int
zfs_uio_prefaultpages(ssize_t n, zfs_uio_t *uio)
{
if (uio->uio_segflg == UIO_SYSSPACE || uio->uio_segflg == UIO_BVEC) {
/* There's never a need to fault in kernel pages */
return (0);
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#if defined(HAVE_VFS_IOV_ITER)
} else if (uio->uio_segflg == UIO_ITER) {
/*
* At least a Linux 4.9 kernel, iov_iter_fault_in_readable()
* can be relied on to fault in user pages when referenced.
*/
if (iov_iter_fault_in_readable(uio->uio_iter, n))
return (EFAULT);
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#endif
} else {
/* Fault in all user pages */
ASSERT3S(uio->uio_segflg, ==, UIO_USERSPACE);
const struct iovec *iov = uio->uio_iov;
int iovcnt = uio->uio_iovcnt;
size_t skip = uio->uio_skip;
uint8_t tmp;
caddr_t p;
for (; n > 0 && iovcnt > 0; iov++, iovcnt--, skip = 0) {
ulong_t cnt = MIN(iov->iov_len - skip, n);
/* empty iov */
if (cnt == 0)
continue;
n -= cnt;
/* touch each page in this segment. */
p = iov->iov_base + skip;
while (cnt) {
if (copy_from_user(&tmp, p, 1))
return (EFAULT);
ulong_t incr = MIN(cnt, PAGESIZE);
p += incr;
cnt -= incr;
}
/* touch the last byte in case it straddles a page. */
p--;
if (copy_from_user(&tmp, p, 1))
return (EFAULT);
}
}
return (0);
}
EXPORT_SYMBOL(zfs_uio_prefaultpages);
/*
* The same as zfs_uiomove() but doesn't modify uio structure.
* return in cbytes how many bytes were copied.
*/
int
zfs_uiocopy(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio, size_t *cbytes)
{
zfs_uio_t uio_copy;
int ret;
memcpy(&uio_copy, uio, sizeof (zfs_uio_t));
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
if (uio->uio_segflg == UIO_BVEC)
ret = zfs_uiomove_bvec(p, n, rw, &uio_copy);
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#if defined(HAVE_VFS_IOV_ITER)
else if (uio->uio_segflg == UIO_ITER)
ret = zfs_uiomove_iter(p, n, rw, &uio_copy, B_TRUE);
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#endif
else
ret = zfs_uiomove_iov(p, n, rw, &uio_copy);
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
*cbytes = uio->uio_resid - uio_copy.uio_resid;
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
return (ret);
}
EXPORT_SYMBOL(zfs_uiocopy);
/*
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
* Drop the next n chars out of *uio.
*/
void
zfs_uioskip(zfs_uio_t *uio, size_t n)
{
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
if (n > uio->uio_resid)
return;
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
if (uio->uio_segflg == UIO_BVEC) {
uio->uio_skip += n;
while (uio->uio_iovcnt &&
uio->uio_skip >= uio->uio_bvec->bv_len) {
uio->uio_skip -= uio->uio_bvec->bv_len;
uio->uio_bvec++;
uio->uio_iovcnt--;
}
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
#if defined(HAVE_VFS_IOV_ITER)
} else if (uio->uio_segflg == UIO_ITER) {
iov_iter_advance(uio->uio_iter, n);
#endif
} else {
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
uio->uio_skip += n;
while (uio->uio_iovcnt &&
uio->uio_skip >= uio->uio_iov->iov_len) {
uio->uio_skip -= uio->uio_iov->iov_len;
uio->uio_iov++;
uio->uio_iovcnt--;
}
}
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
uio->uio_loffset += n;
uio->uio_resid -= n;
}
EXPORT_SYMBOL(zfs_uioskip);
#endif /* _KERNEL */