mirror_zfs/module/icp/algs/modes/gcm.c

847 lines
21 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <modes/modes.h>
#include <sys/crypto/common.h>
#include <sys/crypto/icp.h>
#include <sys/crypto/impl.h>
#include <sys/byteorder.h>
#include <sys/simd.h>
#include <modes/gcm_impl.h>
#define GHASH(c, d, t, o) \
xor_block((uint8_t *)(d), (uint8_t *)(c)->gcm_ghash); \
(o)->mul((uint64_t *)(void *)(c)->gcm_ghash, (c)->gcm_H, \
(uint64_t *)(void *)(t));
/*
* Encrypt multiple blocks of data in GCM mode. Decrypt for GCM mode
* is done in another function.
*/
int
gcm_mode_encrypt_contiguous_blocks(gcm_ctx_t *ctx, char *data, size_t length,
crypto_data_t *out, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *gops;
size_t remainder = length;
size_t need = 0;
uint8_t *datap = (uint8_t *)data;
uint8_t *blockp;
uint8_t *lastp;
void *iov_or_mp;
offset_t offset;
uint8_t *out_data_1;
uint8_t *out_data_2;
size_t out_data_1_len;
uint64_t counter;
uint64_t counter_mask = ntohll(0x00000000ffffffffULL);
if (length + ctx->gcm_remainder_len < block_size) {
/* accumulate bytes here and return */
bcopy(datap,
(uint8_t *)ctx->gcm_remainder + ctx->gcm_remainder_len,
length);
ctx->gcm_remainder_len += length;
ctx->gcm_copy_to = datap;
return (CRYPTO_SUCCESS);
}
lastp = (uint8_t *)ctx->gcm_cb;
if (out != NULL)
crypto_init_ptrs(out, &iov_or_mp, &offset);
gops = gcm_impl_get_ops();
do {
/* Unprocessed data from last call. */
if (ctx->gcm_remainder_len > 0) {
need = block_size - ctx->gcm_remainder_len;
if (need > remainder)
return (CRYPTO_DATA_LEN_RANGE);
bcopy(datap, &((uint8_t *)ctx->gcm_remainder)
[ctx->gcm_remainder_len], need);
blockp = (uint8_t *)ctx->gcm_remainder;
} else {
blockp = datap;
}
/*
* Increment counter. Counter bits are confined
* to the bottom 32 bits of the counter block.
*/
counter = ntohll(ctx->gcm_cb[1] & counter_mask);
counter = htonll(counter + 1);
counter &= counter_mask;
ctx->gcm_cb[1] = (ctx->gcm_cb[1] & ~counter_mask) | counter;
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_cb,
(uint8_t *)ctx->gcm_tmp);
xor_block(blockp, (uint8_t *)ctx->gcm_tmp);
lastp = (uint8_t *)ctx->gcm_tmp;
ctx->gcm_processed_data_len += block_size;
if (out == NULL) {
if (ctx->gcm_remainder_len > 0) {
bcopy(blockp, ctx->gcm_copy_to,
ctx->gcm_remainder_len);
bcopy(blockp + ctx->gcm_remainder_len, datap,
need);
}
} else {
crypto_get_ptrs(out, &iov_or_mp, &offset, &out_data_1,
&out_data_1_len, &out_data_2, block_size);
/* copy block to where it belongs */
if (out_data_1_len == block_size) {
copy_block(lastp, out_data_1);
} else {
bcopy(lastp, out_data_1, out_data_1_len);
if (out_data_2 != NULL) {
bcopy(lastp + out_data_1_len,
out_data_2,
block_size - out_data_1_len);
}
}
/* update offset */
out->cd_offset += block_size;
}
/* add ciphertext to the hash */
GHASH(ctx, ctx->gcm_tmp, ctx->gcm_ghash, gops);
/* Update pointer to next block of data to be processed. */
if (ctx->gcm_remainder_len != 0) {
datap += need;
ctx->gcm_remainder_len = 0;
} else {
datap += block_size;
}
remainder = (size_t)&data[length] - (size_t)datap;
/* Incomplete last block. */
if (remainder > 0 && remainder < block_size) {
bcopy(datap, ctx->gcm_remainder, remainder);
ctx->gcm_remainder_len = remainder;
ctx->gcm_copy_to = datap;
goto out;
}
ctx->gcm_copy_to = NULL;
} while (remainder > 0);
out:
return (CRYPTO_SUCCESS);
}
/* ARGSUSED */
int
gcm_encrypt_final(gcm_ctx_t *ctx, crypto_data_t *out, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *gops;
uint64_t counter_mask = ntohll(0x00000000ffffffffULL);
uint8_t *ghash, *macp = NULL;
int i, rv;
if (out->cd_length <
(ctx->gcm_remainder_len + ctx->gcm_tag_len)) {
return (CRYPTO_DATA_LEN_RANGE);
}
gops = gcm_impl_get_ops();
ghash = (uint8_t *)ctx->gcm_ghash;
if (ctx->gcm_remainder_len > 0) {
uint64_t counter;
uint8_t *tmpp = (uint8_t *)ctx->gcm_tmp;
/*
* Here is where we deal with data that is not a
* multiple of the block size.
*/
/*
* Increment counter.
*/
counter = ntohll(ctx->gcm_cb[1] & counter_mask);
counter = htonll(counter + 1);
counter &= counter_mask;
ctx->gcm_cb[1] = (ctx->gcm_cb[1] & ~counter_mask) | counter;
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_cb,
(uint8_t *)ctx->gcm_tmp);
macp = (uint8_t *)ctx->gcm_remainder;
bzero(macp + ctx->gcm_remainder_len,
block_size - ctx->gcm_remainder_len);
/* XOR with counter block */
for (i = 0; i < ctx->gcm_remainder_len; i++) {
macp[i] ^= tmpp[i];
}
/* add ciphertext to the hash */
GHASH(ctx, macp, ghash, gops);
ctx->gcm_processed_data_len += ctx->gcm_remainder_len;
}
ctx->gcm_len_a_len_c[1] =
htonll(CRYPTO_BYTES2BITS(ctx->gcm_processed_data_len));
GHASH(ctx, ctx->gcm_len_a_len_c, ghash, gops);
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_J0,
(uint8_t *)ctx->gcm_J0);
xor_block((uint8_t *)ctx->gcm_J0, ghash);
if (ctx->gcm_remainder_len > 0) {
rv = crypto_put_output_data(macp, out, ctx->gcm_remainder_len);
if (rv != CRYPTO_SUCCESS)
return (rv);
}
out->cd_offset += ctx->gcm_remainder_len;
ctx->gcm_remainder_len = 0;
rv = crypto_put_output_data(ghash, out, ctx->gcm_tag_len);
if (rv != CRYPTO_SUCCESS)
return (rv);
out->cd_offset += ctx->gcm_tag_len;
return (CRYPTO_SUCCESS);
}
/*
* This will only deal with decrypting the last block of the input that
* might not be a multiple of block length.
*/
static void
gcm_decrypt_incomplete_block(gcm_ctx_t *ctx, size_t block_size, size_t index,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
uint8_t *datap, *outp, *counterp;
uint64_t counter;
uint64_t counter_mask = ntohll(0x00000000ffffffffULL);
int i;
/*
* Increment counter.
* Counter bits are confined to the bottom 32 bits
*/
counter = ntohll(ctx->gcm_cb[1] & counter_mask);
counter = htonll(counter + 1);
counter &= counter_mask;
ctx->gcm_cb[1] = (ctx->gcm_cb[1] & ~counter_mask) | counter;
datap = (uint8_t *)ctx->gcm_remainder;
outp = &((ctx->gcm_pt_buf)[index]);
counterp = (uint8_t *)ctx->gcm_tmp;
/* authentication tag */
bzero((uint8_t *)ctx->gcm_tmp, block_size);
bcopy(datap, (uint8_t *)ctx->gcm_tmp, ctx->gcm_remainder_len);
/* add ciphertext to the hash */
GHASH(ctx, ctx->gcm_tmp, ctx->gcm_ghash, gcm_impl_get_ops());
/* decrypt remaining ciphertext */
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_cb, counterp);
/* XOR with counter block */
for (i = 0; i < ctx->gcm_remainder_len; i++) {
outp[i] = datap[i] ^ counterp[i];
}
}
/* ARGSUSED */
int
gcm_mode_decrypt_contiguous_blocks(gcm_ctx_t *ctx, char *data, size_t length,
crypto_data_t *out, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
size_t new_len;
uint8_t *new;
/*
* Copy contiguous ciphertext input blocks to plaintext buffer.
* Ciphertext will be decrypted in the final.
*/
if (length > 0) {
new_len = ctx->gcm_pt_buf_len + length;
new = vmem_alloc(new_len, ctx->gcm_kmflag);
bcopy(ctx->gcm_pt_buf, new, ctx->gcm_pt_buf_len);
vmem_free(ctx->gcm_pt_buf, ctx->gcm_pt_buf_len);
if (new == NULL)
return (CRYPTO_HOST_MEMORY);
ctx->gcm_pt_buf = new;
ctx->gcm_pt_buf_len = new_len;
bcopy(data, &ctx->gcm_pt_buf[ctx->gcm_processed_data_len],
length);
ctx->gcm_processed_data_len += length;
}
ctx->gcm_remainder_len = 0;
return (CRYPTO_SUCCESS);
}
int
gcm_decrypt_final(gcm_ctx_t *ctx, crypto_data_t *out, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *gops;
size_t pt_len;
size_t remainder;
uint8_t *ghash;
uint8_t *blockp;
uint8_t *cbp;
uint64_t counter;
uint64_t counter_mask = ntohll(0x00000000ffffffffULL);
int processed = 0, rv;
ASSERT(ctx->gcm_processed_data_len == ctx->gcm_pt_buf_len);
gops = gcm_impl_get_ops();
pt_len = ctx->gcm_processed_data_len - ctx->gcm_tag_len;
ghash = (uint8_t *)ctx->gcm_ghash;
blockp = ctx->gcm_pt_buf;
remainder = pt_len;
while (remainder > 0) {
/* Incomplete last block */
if (remainder < block_size) {
bcopy(blockp, ctx->gcm_remainder, remainder);
ctx->gcm_remainder_len = remainder;
/*
* not expecting anymore ciphertext, just
* compute plaintext for the remaining input
*/
gcm_decrypt_incomplete_block(ctx, block_size,
processed, encrypt_block, xor_block);
ctx->gcm_remainder_len = 0;
goto out;
}
/* add ciphertext to the hash */
GHASH(ctx, blockp, ghash, gops);
/*
* Increment counter.
* Counter bits are confined to the bottom 32 bits
*/
counter = ntohll(ctx->gcm_cb[1] & counter_mask);
counter = htonll(counter + 1);
counter &= counter_mask;
ctx->gcm_cb[1] = (ctx->gcm_cb[1] & ~counter_mask) | counter;
cbp = (uint8_t *)ctx->gcm_tmp;
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_cb, cbp);
/* XOR with ciphertext */
xor_block(cbp, blockp);
processed += block_size;
blockp += block_size;
remainder -= block_size;
}
out:
ctx->gcm_len_a_len_c[1] = htonll(CRYPTO_BYTES2BITS(pt_len));
GHASH(ctx, ctx->gcm_len_a_len_c, ghash, gops);
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_J0,
(uint8_t *)ctx->gcm_J0);
xor_block((uint8_t *)ctx->gcm_J0, ghash);
/* compare the input authentication tag with what we calculated */
if (bcmp(&ctx->gcm_pt_buf[pt_len], ghash, ctx->gcm_tag_len)) {
/* They don't match */
return (CRYPTO_INVALID_MAC);
} else {
rv = crypto_put_output_data(ctx->gcm_pt_buf, out, pt_len);
if (rv != CRYPTO_SUCCESS)
return (rv);
out->cd_offset += pt_len;
}
return (CRYPTO_SUCCESS);
}
static int
gcm_validate_args(CK_AES_GCM_PARAMS *gcm_param)
{
size_t tag_len;
/*
* Check the length of the authentication tag (in bits).
*/
tag_len = gcm_param->ulTagBits;
switch (tag_len) {
case 32:
case 64:
case 96:
case 104:
case 112:
case 120:
case 128:
break;
default:
return (CRYPTO_MECHANISM_PARAM_INVALID);
}
if (gcm_param->ulIvLen == 0)
return (CRYPTO_MECHANISM_PARAM_INVALID);
return (CRYPTO_SUCCESS);
}
static void
gcm_format_initial_blocks(uchar_t *iv, ulong_t iv_len,
gcm_ctx_t *ctx, size_t block_size,
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *gops;
uint8_t *cb;
ulong_t remainder = iv_len;
ulong_t processed = 0;
uint8_t *datap, *ghash;
uint64_t len_a_len_c[2];
gops = gcm_impl_get_ops();
ghash = (uint8_t *)ctx->gcm_ghash;
cb = (uint8_t *)ctx->gcm_cb;
if (iv_len == 12) {
bcopy(iv, cb, 12);
cb[12] = 0;
cb[13] = 0;
cb[14] = 0;
cb[15] = 1;
/* J0 will be used again in the final */
copy_block(cb, (uint8_t *)ctx->gcm_J0);
} else {
/* GHASH the IV */
do {
if (remainder < block_size) {
bzero(cb, block_size);
bcopy(&(iv[processed]), cb, remainder);
datap = (uint8_t *)cb;
remainder = 0;
} else {
datap = (uint8_t *)(&(iv[processed]));
processed += block_size;
remainder -= block_size;
}
GHASH(ctx, datap, ghash, gops);
} while (remainder > 0);
len_a_len_c[0] = 0;
len_a_len_c[1] = htonll(CRYPTO_BYTES2BITS(iv_len));
GHASH(ctx, len_a_len_c, ctx->gcm_J0, gops);
/* J0 will be used again in the final */
copy_block((uint8_t *)ctx->gcm_J0, (uint8_t *)cb);
}
}
/*
* The following function is called at encrypt or decrypt init time
* for AES GCM mode.
*/
int
gcm_init(gcm_ctx_t *ctx, unsigned char *iv, size_t iv_len,
unsigned char *auth_data, size_t auth_data_len, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *gops;
uint8_t *ghash, *datap, *authp;
size_t remainder, processed;
/* encrypt zero block to get subkey H */
bzero(ctx->gcm_H, sizeof (ctx->gcm_H));
encrypt_block(ctx->gcm_keysched, (uint8_t *)ctx->gcm_H,
(uint8_t *)ctx->gcm_H);
gcm_format_initial_blocks(iv, iv_len, ctx, block_size,
copy_block, xor_block);
gops = gcm_impl_get_ops();
authp = (uint8_t *)ctx->gcm_tmp;
ghash = (uint8_t *)ctx->gcm_ghash;
bzero(authp, block_size);
bzero(ghash, block_size);
processed = 0;
remainder = auth_data_len;
do {
if (remainder < block_size) {
/*
* There's not a block full of data, pad rest of
* buffer with zero
*/
bzero(authp, block_size);
bcopy(&(auth_data[processed]), authp, remainder);
datap = (uint8_t *)authp;
remainder = 0;
} else {
datap = (uint8_t *)(&(auth_data[processed]));
processed += block_size;
remainder -= block_size;
}
/* add auth data to the hash */
GHASH(ctx, datap, ghash, gops);
} while (remainder > 0);
return (CRYPTO_SUCCESS);
}
int
gcm_init_ctx(gcm_ctx_t *gcm_ctx, char *param, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
int rv;
CK_AES_GCM_PARAMS *gcm_param;
if (param != NULL) {
gcm_param = (CK_AES_GCM_PARAMS *)(void *)param;
if ((rv = gcm_validate_args(gcm_param)) != 0) {
return (rv);
}
gcm_ctx->gcm_tag_len = gcm_param->ulTagBits;
gcm_ctx->gcm_tag_len >>= 3;
gcm_ctx->gcm_processed_data_len = 0;
/* these values are in bits */
gcm_ctx->gcm_len_a_len_c[0]
= htonll(CRYPTO_BYTES2BITS(gcm_param->ulAADLen));
rv = CRYPTO_SUCCESS;
gcm_ctx->gcm_flags |= GCM_MODE;
} else {
rv = CRYPTO_MECHANISM_PARAM_INVALID;
goto out;
}
if (gcm_init(gcm_ctx, gcm_param->pIv, gcm_param->ulIvLen,
gcm_param->pAAD, gcm_param->ulAADLen, block_size,
encrypt_block, copy_block, xor_block) != 0) {
rv = CRYPTO_MECHANISM_PARAM_INVALID;
}
out:
return (rv);
}
int
gmac_init_ctx(gcm_ctx_t *gcm_ctx, char *param, size_t block_size,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *))
{
int rv;
CK_AES_GMAC_PARAMS *gmac_param;
if (param != NULL) {
gmac_param = (CK_AES_GMAC_PARAMS *)(void *)param;
gcm_ctx->gcm_tag_len = CRYPTO_BITS2BYTES(AES_GMAC_TAG_BITS);
gcm_ctx->gcm_processed_data_len = 0;
/* these values are in bits */
gcm_ctx->gcm_len_a_len_c[0]
= htonll(CRYPTO_BYTES2BITS(gmac_param->ulAADLen));
rv = CRYPTO_SUCCESS;
gcm_ctx->gcm_flags |= GMAC_MODE;
} else {
rv = CRYPTO_MECHANISM_PARAM_INVALID;
goto out;
}
if (gcm_init(gcm_ctx, gmac_param->pIv, AES_GMAC_IV_LEN,
gmac_param->pAAD, gmac_param->ulAADLen, block_size,
encrypt_block, copy_block, xor_block) != 0) {
rv = CRYPTO_MECHANISM_PARAM_INVALID;
}
out:
return (rv);
}
void *
gcm_alloc_ctx(int kmflag)
{
gcm_ctx_t *gcm_ctx;
if ((gcm_ctx = kmem_zalloc(sizeof (gcm_ctx_t), kmflag)) == NULL)
return (NULL);
gcm_ctx->gcm_flags = GCM_MODE;
return (gcm_ctx);
}
void *
gmac_alloc_ctx(int kmflag)
{
gcm_ctx_t *gcm_ctx;
if ((gcm_ctx = kmem_zalloc(sizeof (gcm_ctx_t), kmflag)) == NULL)
return (NULL);
gcm_ctx->gcm_flags = GMAC_MODE;
return (gcm_ctx);
}
void
gcm_set_kmflag(gcm_ctx_t *ctx, int kmflag)
{
ctx->gcm_kmflag = kmflag;
}
/* GCM implementation that contains the fastest methods */
static gcm_impl_ops_t gcm_fastest_impl = {
.name = "fastest"
};
/* All compiled in implementations */
const gcm_impl_ops_t *gcm_all_impl[] = {
&gcm_generic_impl,
#if defined(__x86_64) && defined(HAVE_PCLMULQDQ)
&gcm_pclmulqdq_impl,
#endif
};
/* Indicate that benchmark has been completed */
static boolean_t gcm_impl_initialized = B_FALSE;
/* Select GCM implementation */
#define IMPL_FASTEST (UINT32_MAX)
#define IMPL_CYCLE (UINT32_MAX-1)
#define GCM_IMPL_READ(i) (*(volatile uint32_t *) &(i))
static uint32_t icp_gcm_impl = IMPL_FASTEST;
static uint32_t user_sel_impl = IMPL_FASTEST;
/* Hold all supported implementations */
static size_t gcm_supp_impl_cnt = 0;
static gcm_impl_ops_t *gcm_supp_impl[ARRAY_SIZE(gcm_all_impl)];
/*
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
* Returns the GCM operations for encrypt/decrypt/key setup. When a
* SIMD implementation is not allowed in the current context, then
* fallback to the fastest generic implementation.
*/
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
const gcm_impl_ops_t *
gcm_impl_get_ops()
{
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
if (!kfpu_allowed())
return (&gcm_generic_impl);
const gcm_impl_ops_t *ops = NULL;
const uint32_t impl = GCM_IMPL_READ(icp_gcm_impl);
switch (impl) {
case IMPL_FASTEST:
ASSERT(gcm_impl_initialized);
ops = &gcm_fastest_impl;
break;
case IMPL_CYCLE:
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
/* Cycle through supported implementations */
ASSERT(gcm_impl_initialized);
ASSERT3U(gcm_supp_impl_cnt, >, 0);
static size_t cycle_impl_idx = 0;
size_t idx = (++cycle_impl_idx) % gcm_supp_impl_cnt;
ops = gcm_supp_impl[idx];
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
break;
default:
ASSERT3U(impl, <, gcm_supp_impl_cnt);
ASSERT3U(gcm_supp_impl_cnt, >, 0);
if (impl < ARRAY_SIZE(gcm_all_impl))
ops = gcm_supp_impl[impl];
break;
}
ASSERT3P(ops, !=, NULL);
return (ops);
}
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
/*
* Initialize all supported implementations.
*/
void
gcm_impl_init(void)
{
gcm_impl_ops_t *curr_impl;
int i, c;
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
/* Move supported implementations into gcm_supp_impls */
for (i = 0, c = 0; i < ARRAY_SIZE(gcm_all_impl); i++) {
curr_impl = (gcm_impl_ops_t *)gcm_all_impl[i];
if (curr_impl->is_supported())
gcm_supp_impl[c++] = (gcm_impl_ops_t *)curr_impl;
}
gcm_supp_impl_cnt = c;
Linux 5.0 compat: SIMD compatibility Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS, and 5.0 and newer kernels. This is accomplished by leveraging the fact that by definition dedicated kernel threads never need to concern themselves with saving and restoring the user FPU state. Therefore, they may use the FPU as long as we can guarantee user tasks always restore their FPU state before context switching back to user space. For the 5.0 and 5.1 kernels disabling preemption and local interrupts is sufficient to allow the FPU to be used. All non-kernel threads will restore the preserved user FPU state. For 5.2 and latter kernels the user FPU state restoration will be skipped if the kernel determines the registers have not changed. Therefore, for these kernels we need to perform the additional step of saving and restoring the FPU registers. Invalidating the per-cpu global tracking the FPU state would force a restore but that functionality is private to the core x86 FPU implementation and unavailable. In practice, restricting SIMD to kernel threads is not a major restriction for ZFS. The vast majority of SIMD operations are already performed by the IO pipeline. The remaining cases are relatively infrequent and can be handled by the generic code without significant impact. The two most noteworthy cases are: 1) Decrypting the wrapping key for an encrypted dataset, i.e. `zfs load-key`. All other encryption and decryption operations will use the SIMD optimized implementations. 2) Generating the payload checksums for a `zfs send` stream. In order to avoid making any changes to the higher layers of ZFS all of the `*_get_ops()` functions were updated to take in to consideration the calling context. This allows for the fastest implementation to be used as appropriate (see kfpu_allowed()). The only other notable instance of SIMD operations being used outside a kernel thread was at module load time. This code was moved in to a taskq in order to accommodate the new kernel thread restriction. Finally, a few other modifications were made in order to further harden this code and facilitate testing. They include updating each implementations operations structure to be declared as a constant. And allowing "cycle" to be set when selecting the preferred ops in the kernel as well as user space. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8754 Closes #8793 Closes #8965
2019-07-12 19:31:20 +03:00
/*
* Set the fastest implementation given the assumption that the
* hardware accelerated version is the fastest.
*/
#if defined(__x86_64) && defined(HAVE_PCLMULQDQ)
if (gcm_pclmulqdq_impl.is_supported()) {
memcpy(&gcm_fastest_impl, &gcm_pclmulqdq_impl,
sizeof (gcm_fastest_impl));
} else
#endif
{
memcpy(&gcm_fastest_impl, &gcm_generic_impl,
sizeof (gcm_fastest_impl));
}
strcpy(gcm_fastest_impl.name, "fastest");
/* Finish initialization */
atomic_swap_32(&icp_gcm_impl, user_sel_impl);
gcm_impl_initialized = B_TRUE;
}
static const struct {
char *name;
uint32_t sel;
} gcm_impl_opts[] = {
{ "cycle", IMPL_CYCLE },
{ "fastest", IMPL_FASTEST },
};
/*
* Function sets desired gcm implementation.
*
* If we are called before init(), user preference will be saved in
* user_sel_impl, and applied in later init() call. This occurs when module
* parameter is specified on module load. Otherwise, directly update
* icp_gcm_impl.
*
* @val Name of gcm implementation to use
* @param Unused.
*/
int
gcm_impl_set(const char *val)
{
int err = -EINVAL;
char req_name[GCM_IMPL_NAME_MAX];
uint32_t impl = GCM_IMPL_READ(user_sel_impl);
size_t i;
/* sanitize input */
i = strnlen(val, GCM_IMPL_NAME_MAX);
if (i == 0 || i >= GCM_IMPL_NAME_MAX)
return (err);
strlcpy(req_name, val, GCM_IMPL_NAME_MAX);
while (i > 0 && isspace(req_name[i-1]))
i--;
req_name[i] = '\0';
/* Check mandatory options */
for (i = 0; i < ARRAY_SIZE(gcm_impl_opts); i++) {
if (strcmp(req_name, gcm_impl_opts[i].name) == 0) {
impl = gcm_impl_opts[i].sel;
err = 0;
break;
}
}
/* check all supported impl if init() was already called */
if (err != 0 && gcm_impl_initialized) {
/* check all supported implementations */
for (i = 0; i < gcm_supp_impl_cnt; i++) {
if (strcmp(req_name, gcm_supp_impl[i]->name) == 0) {
impl = i;
err = 0;
break;
}
}
}
if (err == 0) {
if (gcm_impl_initialized)
atomic_swap_32(&icp_gcm_impl, impl);
else
atomic_swap_32(&user_sel_impl, impl);
}
return (err);
}
#if defined(_KERNEL)
static int
icp_gcm_impl_set(const char *val, zfs_kernel_param_t *kp)
{
return (gcm_impl_set(val));
}
static int
icp_gcm_impl_get(char *buffer, zfs_kernel_param_t *kp)
{
int i, cnt = 0;
char *fmt;
const uint32_t impl = GCM_IMPL_READ(icp_gcm_impl);
ASSERT(gcm_impl_initialized);
/* list mandatory options */
for (i = 0; i < ARRAY_SIZE(gcm_impl_opts); i++) {
fmt = (impl == gcm_impl_opts[i].sel) ? "[%s] " : "%s ";
cnt += sprintf(buffer + cnt, fmt, gcm_impl_opts[i].name);
}
/* list all supported implementations */
for (i = 0; i < gcm_supp_impl_cnt; i++) {
fmt = (i == impl) ? "[%s] " : "%s ";
cnt += sprintf(buffer + cnt, fmt, gcm_supp_impl[i]->name);
}
return (cnt);
}
module_param_call(icp_gcm_impl, icp_gcm_impl_set, icp_gcm_impl_get,
NULL, 0644);
MODULE_PARM_DESC(icp_gcm_impl, "Select gcm implementation.");
#endif