c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 10:01:01 +03:00
Code Issues Packages Projects Releases Wiki Activity
77f6826b83
mirror_zfs/man/man8/zdb.8

470 lines
13 KiB
Groff
Raw Normal View History

Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
.\"
.\" This file and its contents are supplied under the terms of the
.\" Common Development and Distribution License ("CDDL"), version 1.0.
.\" You may only use this file in accordance with the terms of version
.\" 1.0 of the CDDL.
.\"
.\" A full copy of the text of the CDDL should have accompanied this
.\" source. A copy of the CDDL is also available via the Internet at
.\" http://www.illumos.org/license/CDDL.
.\"
.\"
.\" Copyright 2012, Richard Lowe.
zdb -L should skip leak detection altogether Currently the point of -L option in zdb is to disable leak tracing and the loading of space maps because they are expensive, yet still do leak detection in terms of space. Unfortunately, there is a scenario where this is a lie. If we are using zdb -L on a pool where a vdev is being removed, zdb_claim_removing() will open the metaslab space maps of that device. This patch makes it so zdb -L skips leak detection altogether and ensures that no space maps are loaded. Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8335
2019-01-30 20:54:27 +03:00
.\" Copyright (c) 2012, 2018 by Delphix. All rights reserved.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.\" Copyright 2017 Nexenta Systems, Inc.
.\" Copyright (c) 2017 Lawrence Livermore National Security, LLC.
.\" Copyright (c) 2017 Intel Corporation.
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
.\"
Correct man page dates Various changes (many by me) have been made to the man pages without bumping their dates. I have now corrected them based on the last commit to each file. I also added the script I used to make these changes. Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com> Closes #8710
2019-05-06 00:45:56 +03:00
.Dd April 14, 2019
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Dt ZDB 8 SMM
.Os Linux
.Sh NAME
.Nm zdb
.Nd display zpool debugging and consistency information
.Sh SYNOPSIS
.Nm
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-17 01:10:02 +03:00
.Op Fl AbcdDFGhikLMPsvXY
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Op Fl I Ar inflight I/Os
.Oo Fl o Ar var Ns = Ns Ar value Oc Ns ...
.Op Fl t Ar txg
.Op Fl U Ar cache
.Op Fl x Ar dumpdir
zdb -d should accept the numeric objset id As an alternative to the dataset name, zdb now allows the decimal or hexadecimal objset ID to be specified. When permanent errors are reported as 2 hexadecimal numbers (objset ID : object ID) in zpool status; you can now use 'zdb <pool>[/objset ID] object' to determine the names of the objset and object which have the error. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9733
2020-01-16 20:22:49 +03:00
.Op Ar poolname[/dataset | objset ID]
zdb: add support for object ranges for zdb -d Allow a range of object identifiers to dump with -d. This may be useful when dumping a large dataset and you want to break it up into multiple phases, or to resume where a previous scan left off. Object type selection flags are supported to reduce the performance overhead of verbosely dumping unwanted objects, and to reduce the amount of post-processing work needed to filter out unwanted objects from zdb output. This change extends existing syntax in a backward-compatible way. That is, the base case of a range is to specify a single object identifier to dump. Ranges and object identifiers can be intermixed as command line parameters. Usage synopsis: Object ranges take the form <start>:<end>[:<flags>] start Starting object number end Ending object number, or -1 for no upper bound flags Optional flags to select object types: A All objects (this is the default) d ZFS directories f ZFS files m SPA space maps z ZAPs - Negate effect of next flag Examples: # Dump all file objects zdb -dd tank/fish 0:-1:f # Dump all file and directory objects zdb -dd tank/fish 0:-1:fd # Dump all types except file and directory objects zdb -dd tank/fish 0:-1:A-f-d # Dump object IDs in a specific range zdb -dd tank/fish 1000:2000 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #9832
2020-01-24 22:00:46 +03:00
.Op Ar object | range ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Nm
.Op Fl AdiPv
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Op Fl U Ar cache
zdb: add support for object ranges for zdb -d Allow a range of object identifiers to dump with -d. This may be useful when dumping a large dataset and you want to break it up into multiple phases, or to resume where a previous scan left off. Object type selection flags are supported to reduce the performance overhead of verbosely dumping unwanted objects, and to reduce the amount of post-processing work needed to filter out unwanted objects from zdb output. This change extends existing syntax in a backward-compatible way. That is, the base case of a range is to specify a single object identifier to dump. Ranges and object identifiers can be intermixed as command line parameters. Usage synopsis: Object ranges take the form <start>:<end>[:<flags>] start Starting object number end Ending object number, or -1 for no upper bound flags Optional flags to select object types: A All objects (this is the default) d ZFS directories f ZFS files m SPA space maps z ZAPs - Negate effect of next flag Examples: # Dump all file objects zdb -dd tank/fish 0:-1:f # Dump all file and directory objects zdb -dd tank/fish 0:-1:fd # Dump all types except file and directory objects zdb -dd tank/fish 0:-1:A-f-d # Dump object IDs in a specific range zdb -dd tank/fish 1000:2000 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #9832
2020-01-24 22:00:46 +03:00
.Ar poolname[/dataset | objset ID] Op Ar object | range ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Nm
.Fl C
.Op Fl A
.Op Fl U Ar cache
.Nm
OpenZFS 8067 - zdb should be able to dump literal embedded block pointer Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8067 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085 Closes #6319
2017-05-01 21:06:07 +03:00
.Fl E
.Op Fl A
OpenZFS 8547 - update mandoc to 1.14.3 Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Robert Mustacchi <rm@joyent.com> Approved by: Richard Lowe <richlowe@richlowe.net> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8547 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c66b804 Closes #6549
2017-08-24 20:30:42 +03:00
.Ar word0 Ns \&: Ns Ar word1 Ns :...: Ns Ar word15
OpenZFS 8067 - zdb should be able to dump literal embedded block pointer Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8067 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085 Closes #6319
2017-05-01 21:06:07 +03:00
.Nm
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Fl l
.Op Fl Aqu
.Ar device
.Nm
.Fl m
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-17 01:10:02 +03:00
.Op Fl AFLPXY
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Op Fl t Ar txg
.Op Fl U Ar cache
.Ar poolname Op Ar vdev Op Ar metaslab ...
.Nm
.Fl O
.Ar dataset path
.Nm
.Fl R
.Op Fl A
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Op Fl U Ar cache
zio_decompress_data always ASSERTs successful decompression This interferes with zdb_read_block trying all the decompression algorithms when the 'd' flag is specified, as some are expected to fail. Also control the output when guessing algorithms, try the more common compression types first, allow specifying lsize/psize, and fix an uninitialized variable. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9612 Closes #9630
2019-12-11 02:51:58 +03:00
.Ar poolname vdev Ns \&: Ns Ar offset Ns \&: Ns Ar [<lsize>/]<psize> Ns Op : Ns Ar flags
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Nm
.Fl S
.Op Fl AP
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
.Op Fl e Oo Fl V Oc Op Fl p Ar path ...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Op Fl U Ar cache
.Ar poolname
.Sh DESCRIPTION
The
.Nm
utility displays information about a ZFS pool useful for debugging and performs
some amount of consistency checking.
It is a not a general purpose tool and options
.Pq and facilities
may change.
Update zdb.8's fsck reference On Linux, this is in man section 8, not 1M. Also, there is no fsdb on Linux, so I removed that. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com> Closes #8626
2019-04-15 05:06:34 +03:00
This is not a
.Xr fsck 8
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
utility.
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
The output of this command in general reflects the on-disk structure of a ZFS
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
pool, and is inherently unstable.
The precise output of most invocations is not documented, a knowledge of ZFS
internals is assumed.
.Pp
If the
.Ar dataset
argument does not contain any
.Qq Sy /
or
.Qq Sy @
characters, it is interpreted as a pool name.
The root dataset can be specified as
.Ar pool Ns /
.Pq pool name followed by a slash .
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
When operating on an imported and active pool it is possible, though unlikely,
that zdb may interpret inconsistent pool data and behave erratically.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Sh OPTIONS
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Display options:
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Bl -tag -width Ds
.It Fl b
Display statistics regarding the number, size
.Pq logical, physical and allocated
and deduplication of blocks.
.It Fl c
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Verify the checksum of all metadata blocks while printing block statistics
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Po see
.Fl b
.Pc .
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
If specified multiple times, verify the checksums of all blocks.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl C
Display information about the configuration.
If specified with no other options, instead display information about the cache
file
.Pq Pa /etc/zfs/zpool.cache .
To specify the cache file to display, see
.Fl U .
.Pp
If specified multiple times, and a pool name is also specified display both the
cached configuration and the on-disk configuration.
If specified multiple times with
.Fl e
also display the configuration that would be used were the pool to be imported.
.It Fl d
Display information about datasets.
Specified once, displays basic dataset information: ID, create transaction,
size, and object count.
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
If specified multiple times provides greater and greater verbosity.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Pp
zdb: add support for object ranges for zdb -d Allow a range of object identifiers to dump with -d. This may be useful when dumping a large dataset and you want to break it up into multiple phases, or to resume where a previous scan left off. Object type selection flags are supported to reduce the performance overhead of verbosely dumping unwanted objects, and to reduce the amount of post-processing work needed to filter out unwanted objects from zdb output. This change extends existing syntax in a backward-compatible way. That is, the base case of a range is to specify a single object identifier to dump. Ranges and object identifiers can be intermixed as command line parameters. Usage synopsis: Object ranges take the form <start>:<end>[:<flags>] start Starting object number end Ending object number, or -1 for no upper bound flags Optional flags to select object types: A All objects (this is the default) d ZFS directories f ZFS files m SPA space maps z ZAPs - Negate effect of next flag Examples: # Dump all file objects zdb -dd tank/fish 0:-1:f # Dump all file and directory objects zdb -dd tank/fish 0:-1:fd # Dump all types except file and directory objects zdb -dd tank/fish 0:-1:A-f-d # Dump object IDs in a specific range zdb -dd tank/fish 1000:2000 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #9832
2020-01-24 22:00:46 +03:00
If object IDs or object ID ranges are specified, display information about
those specific objects or ranges only.
.Pp
An object ID range is specified in terms of a colon-separated tuple of
the form
.Ao start Ac Ns : Ns Ao end Ac Ns Op Ns : Ns Ao flags Ac Ns .
The fields
.Ar start
and
.Ar end
are integer object identfiers that denote the upper and lower bounds
of the range. An
.Ar end
value of -1 specifies a range with no upper bound. The
.Ar flags
field optionally specifies a set of flags, described below, that control
which object types are dumped. By default, all object types are dumped. A minus
sign
.Pq -
negates the effect of the flag that follows it and has no effect unless
preceded by the
.Ar A
flag. For example, the range 0:-1:A-d will dump all object types except
for directories.
.Pp
.Bl -tag -compact
.It Sy A
Dump all objects (this is the default)
.It Sy d
Dump ZFS directory objects
.It Sy f
Dump ZFS plain file objects
.It Sy m
Dump SPA space map objects
.It Sy z
Dump ZAP objects
.It Sy -
Negate the effect of next flag
.El
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl D
Display deduplication statistics, including the deduplication ratio
.Pq Sy dedup ,
compression ratio
.Pq Sy compress ,
inflation due to the zfs copies property
.Pq Sy copies ,
and an overall effective ratio
.Pq Sy dedup No * Sy compress No / Sy copies .
.It Fl DD
Display a histogram of deduplication statistics, showing the allocated
.Pq physically present on disk
and referenced
.Pq logically referenced in the pool
block counts and sizes by reference count.
.It Fl DDD
Display the statistics independently for each deduplication table.
.It Fl DDDD
Dump the contents of the deduplication tables describing duplicate blocks.
.It Fl DDDDD
Also dump the contents of the deduplication tables describing unique blocks.
OpenZFS 8547 - update mandoc to 1.14.3 Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Robert Mustacchi <rm@joyent.com> Approved by: Richard Lowe <richlowe@richlowe.net> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8547 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c66b804 Closes #6549
2017-08-24 20:30:42 +03:00
.It Fl E Ar word0 Ns \&: Ns Ar word1 Ns :...: Ns Ar word15
OpenZFS 8067 - zdb should be able to dump literal embedded block pointer Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8067 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085 Closes #6319
2017-05-01 21:06:07 +03:00
Decode and display block from an embedded block pointer specified by the
.Ar word
arguments.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl h
Display pool history similar to
.Nm zpool Cm history ,
but include internal changes, transaction, and dataset information.
.It Fl i
Display information about intent log
.Pq ZIL
entries relating to each dataset.
If specified multiple times, display counts of each intent log transaction type.
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
.It Fl k
Examine the checkpointed state of the pool.
Note, the on disk format of the pool is not reverted to the checkpointed state.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl l Ar device
Persistent L2ARC This commit makes the L2ARC persistent across reboots. We implement a light-weight persistent L2ARC metadata structure that allows L2ARC contents to be recovered after a reboot. This significantly eases the impact a reboot has on read performance on systems with large caches. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Saso Kiselkov <skiselkov@gmail.com> Co-authored-by: Jorgen Lundman <lundman@lundman.net> Co-authored-by: George Amanakis <gamanakis@gmail.com> Ported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #925 Closes #1823 Closes #2672 Closes #3744 Closes #9582
2020-04-10 20:33:35 +03:00
Read the vdev labels and L2ARC header from the specified device.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Nm Fl l
will return 0 if valid label was found, 1 if error occurred, and 2 if no valid
Persistent L2ARC This commit makes the L2ARC persistent across reboots. We implement a light-weight persistent L2ARC metadata structure that allows L2ARC contents to be recovered after a reboot. This significantly eases the impact a reboot has on read performance on systems with large caches. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Saso Kiselkov <skiselkov@gmail.com> Co-authored-by: Jorgen Lundman <lundman@lundman.net> Co-authored-by: George Amanakis <gamanakis@gmail.com> Ported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #925 Closes #1823 Closes #2672 Closes #3744 Closes #9582
2020-04-10 20:33:35 +03:00
labels were found. The presence of L2ARC header is indicated by a specific
sequence (L2ARC_DEV_HDR_MAGIC). Each unique configuration is displayed only
once.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl ll Ar device
Persistent L2ARC This commit makes the L2ARC persistent across reboots. We implement a light-weight persistent L2ARC metadata structure that allows L2ARC contents to be recovered after a reboot. This significantly eases the impact a reboot has on read performance on systems with large caches. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Saso Kiselkov <skiselkov@gmail.com> Co-authored-by: Jorgen Lundman <lundman@lundman.net> Co-authored-by: George Amanakis <gamanakis@gmail.com> Ported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #925 Closes #1823 Closes #2672 Closes #3744 Closes #9582
2020-04-10 20:33:35 +03:00
In addition display label space usage stats. If a valid L2ARC header was found
also display the properties of log blocks used for restoring L2ARC contents
(persistent L2ARC).
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl lll Ar device
Persistent L2ARC This commit makes the L2ARC persistent across reboots. We implement a light-weight persistent L2ARC metadata structure that allows L2ARC contents to be recovered after a reboot. This significantly eases the impact a reboot has on read performance on systems with large caches. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Saso Kiselkov <skiselkov@gmail.com> Co-authored-by: Jorgen Lundman <lundman@lundman.net> Co-authored-by: George Amanakis <gamanakis@gmail.com> Ported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #925 Closes #1823 Closes #2672 Closes #3744 Closes #9582
2020-04-10 20:33:35 +03:00
Display every configuration, unique or not. If a valid L2ARC header was found
also display the properties of log entries in log blocks used for restoring
L2ARC contents (persistent L2ARC).
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Pp
If the
.Fl q
Persistent L2ARC This commit makes the L2ARC persistent across reboots. We implement a light-weight persistent L2ARC metadata structure that allows L2ARC contents to be recovered after a reboot. This significantly eases the impact a reboot has on read performance on systems with large caches. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Saso Kiselkov <skiselkov@gmail.com> Co-authored-by: Jorgen Lundman <lundman@lundman.net> Co-authored-by: George Amanakis <gamanakis@gmail.com> Ported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #925 Closes #1823 Closes #2672 Closes #3744 Closes #9582
2020-04-10 20:33:35 +03:00
option is also specified, don't print the labels or the L2ARC header.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Pp
If the
.Fl u
option is also specified, also display the uberblocks on this device. Specify
multiple times to increase verbosity.
.It Fl L
zdb -L should skip leak detection altogether Currently the point of -L option in zdb is to disable leak tracing and the loading of space maps because they are expensive, yet still do leak detection in terms of space. Unfortunately, there is a scenario where this is a lie. If we are using zdb -L on a pool where a vdev is being removed, zdb_claim_removing() will open the metaslab space maps of that device. This patch makes it so zdb -L skips leak detection altogether and ensures that no space maps are loaded. Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8335
2019-01-30 20:54:27 +03:00
Disable leak detection and the loading of space maps.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
By default,
.Nm
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
verifies that all non-free blocks are referenced, which can be very expensive.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl m
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 20:11:49 +03:00
Display the offset, spacemap, free space of each metaslab, all the log
spacemaps and their obsolete entry statistics.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl mm
Also display information about the on-disk free space histogram associated with
each metaslab.
.It Fl mmm
Display the maximum contiguous free space, the in-core free space histogram, and
the percentage of free space in each space map.
.It Fl mmmm
Display every spacemap record.
.It Fl M
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
Display the offset, spacemap, and free space of each metaslab.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl MM
Also display information about the maximum contiguous free space and the
percentage of free space in each space map.
.It Fl MMM
Display every spacemap record.
.It Fl O Ar dataset path
Look up the specified
.Ar path
inside of the
.Ar dataset
and display its metadata and indirect blocks.
Specified
.Ar path
must be relative to the root of
.Ar dataset .
This option can be combined with
.Fl v
for increasing verbosity.
OpenZFS 8547 - update mandoc to 1.14.3 Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Robert Mustacchi <rm@joyent.com> Approved by: Richard Lowe <richlowe@richlowe.net> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8547 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c66b804 Closes #6549
2017-08-24 20:30:42 +03:00
.It Xo
zio_decompress_data always ASSERTs successful decompression This interferes with zdb_read_block trying all the decompression algorithms when the 'd' flag is specified, as some are expected to fail. Also control the output when guessing algorithms, try the more common compression types first, allow specifying lsize/psize, and fix an uninitialized variable. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9612 Closes #9630
2019-12-11 02:51:58 +03:00
.Fl R Ar poolname vdev Ns \&: Ns Ar offset Ns \&: Ns Ar [<lsize>/]<psize> Ns Op : Ns Ar flags
OpenZFS 8547 - update mandoc to 1.14.3 Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Robert Mustacchi <rm@joyent.com> Approved by: Richard Lowe <richlowe@richlowe.net> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8547 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c66b804 Closes #6549
2017-08-24 20:30:42 +03:00
.Xc
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
Read and display a block from the specified device.
By default the block is displayed as a hex dump, but see the description of the
.Sy r
flag, below.
.Pp
The block is specified in terms of a colon-separated tuple
.Ar vdev
.Pq an integer vdev identifier
.Ar offset
.Pq the offset within the vdev
.Ar size
zio_decompress_data always ASSERTs successful decompression This interferes with zdb_read_block trying all the decompression algorithms when the 'd' flag is specified, as some are expected to fail. Also control the output when guessing algorithms, try the more common compression types first, allow specifying lsize/psize, and fix an uninitialized variable. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9612 Closes #9630
2019-12-11 02:51:58 +03:00
.Pq the physical size, or logical size / physical size
of the block to read and, optionally,
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Ar flags
.Pq a set of flags, described below .
.Pp
.Bl -tag -compact -width "b offset"
.It Sy b Ar offset
Fix zdb -R with 'b' flag zdb -R :b fails due to the indirect block being compressed, and the 'b' and 'd' flag not working in tandem when specified. Fix the flag parsing code and create a zfs test for zdb -R block display. Also fix the zio flags where the dotted notation for the vdev portion of DVA (i.e. 0.0:offset:length) fails. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9640 Closes #9729
2020-02-11 01:00:05 +03:00
Print block pointer at hex offset
Add display of checksums to zdb -R The function zdb_read_block (zdb -R) was always intended to have a :c flag which would read the DVA and length supplied by the user, and display the checksum. Since we don't know which checksum goes with the data, we should calculate and display them all. For each checksum in the table, read in the data at the supplied DVA:length, calculate the checksum, and display it. Update the man page and create a zfs test for the new feature. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9607
2019-11-27 21:08:18 +03:00
.It Sy c
Calculate and display checksums
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Sy d
Fix zdb -R decompression There are some issues in the zdb -R decompression implementation. The first is that ZLE can easily decompress non-ZLE streams. So we add ZDB_NO_ZLE env to make zdb skip ZLE. The second is the random bytes appended to pabd, pbuf2 stuff. This serve no purpose at all, those bytes shouldn't be read during decompression anyway. Instead, we randomize lbuf2, so that we can make sure decompression fill exactly to lsize by bcmp lbuf and lbuf2. The last one is the condition to detect fail is wrong. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Chunwei Chen <david.chen@nutanix.com> Closes #7099 Closes #4984
2018-02-02 03:19:36 +03:00
Decompress the block. Set environment variable
Fix typos in man/ Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Closes #9233
2019-08-30 19:41:35 +03:00
.Nm ZDB_NO_ZLE
Fix zdb -R decompression There are some issues in the zdb -R decompression implementation. The first is that ZLE can easily decompress non-ZLE streams. So we add ZDB_NO_ZLE env to make zdb skip ZLE. The second is the random bytes appended to pabd, pbuf2 stuff. This serve no purpose at all, those bytes shouldn't be read during decompression anyway. Instead, we randomize lbuf2, so that we can make sure decompression fill exactly to lsize by bcmp lbuf and lbuf2. The last one is the condition to detect fail is wrong. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Chunwei Chen <david.chen@nutanix.com> Closes #7099 Closes #4984
2018-02-02 03:19:36 +03:00
to skip zle when guessing.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Sy e
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Byte swap the block
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Sy g
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Dump gang block header
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Sy i
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Dump indirect block
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Sy r
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Dump raw uninterpreted block data
zio_decompress_data always ASSERTs successful decompression This interferes with zdb_read_block trying all the decompression algorithms when the 'd' flag is specified, as some are expected to fail. Also control the output when guessing algorithms, try the more common compression types first, allow specifying lsize/psize, and fix an uninitialized variable. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #9612 Closes #9630
2019-12-11 02:51:58 +03:00
.It Sy v
Verbose output for guessing compression algorithm
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.El
.It Fl s
Report statistics on
.Nm zdb
I/O.
Display operation counts, bandwidth, and error counts of I/O to the pool from
.Nm .
.It Fl S
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Simulate the effects of deduplication, constructing a DDT and then display
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
that DDT as with
.Fl DD .
.It Fl u
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Display the current uberblock.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.El
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Other options:
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Bl -tag -width Ds
.It Fl A
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Do not abort should any assertion fail.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl AA
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Enable panic recovery, certain errors which would otherwise be fatal are
demoted to warnings.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl AAA
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Do not abort if asserts fail and also enable panic recovery.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl e Op Fl p Ar path ...
Operate on an exported pool, not present in
.Pa /etc/zfs/zpool.cache .
The
.Fl p
flag specifies the path under which devices are to be searched.
.It Fl x Ar dumpdir
Illumos 4891 - want zdb option to dump all metadata 4891 want zdb option to dump all metadata Reviewed by: Sonu Pillai <sonu.pillai@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> We'd like a way for zdb to dump metadata in a machine-readable format, so that we can bring that back from a customer site for in-house diagnosis. Think of it as a crash dump for zpools, which can be used for post-mortem analysis of a malfunctioning pool References: https://www.illumos.org/issues/4891 https://github.com/illumos/illumos-gate/commit/df15e41 Porting notes: - [cmd/zdb/zdb.c] - a5778ea zdb: Introduce -V for verbatim import - In main() getopt 'opt' variable removed and the code was brought back in line with illumos. - [lib/libzpool/kernel.c] - 1e33ac1 Fix Solaris thread dependency by using pthreads - f0e324f Update utsname support - 4d58b69 Fix vn_open/vn_rdwr error handling - In vn_open() allocate 'dumppath' on heap instead of stack - Properly handle 'dump_fd == -1' error path - Free 'realpath' after added vn_dumpdir_code block Ported-by: kernelOfTruth kerneloftruth@gmail.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-01 16:42:58 +03:00
All blocks accessed will be copied to files in the specified directory.
The blocks will be placed in sparse files whose name is the same as
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
that of the file or device read.
.Nm
can be then run on the generated files.
Note that the
.Fl bbc
flags are sufficient to access
.Pq and thus copy
Illumos 4891 - want zdb option to dump all metadata 4891 want zdb option to dump all metadata Reviewed by: Sonu Pillai <sonu.pillai@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> We'd like a way for zdb to dump metadata in a machine-readable format, so that we can bring that back from a customer site for in-house diagnosis. Think of it as a crash dump for zpools, which can be used for post-mortem analysis of a malfunctioning pool References: https://www.illumos.org/issues/4891 https://github.com/illumos/illumos-gate/commit/df15e41 Porting notes: - [cmd/zdb/zdb.c] - a5778ea zdb: Introduce -V for verbatim import - In main() getopt 'opt' variable removed and the code was brought back in line with illumos. - [lib/libzpool/kernel.c] - 1e33ac1 Fix Solaris thread dependency by using pthreads - f0e324f Update utsname support - 4d58b69 Fix vn_open/vn_rdwr error handling - In vn_open() allocate 'dumppath' on heap instead of stack - Properly handle 'dump_fd == -1' error path - Free 'realpath' after added vn_dumpdir_code block Ported-by: kernelOfTruth kerneloftruth@gmail.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-01 16:42:58 +03:00
all metadata on the pool.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl F
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Attempt to make an unreadable pool readable by trying progressively older
transactions.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl G
Dump the contents of the zfs_dbgmsg buffer before exiting
.Nm .
zfs_dbgmsg is a buffer used by ZFS to dump advanced debug information.
.It Fl I Ar inflight I/Os
Limit the number of outstanding checksum I/Os to the specified value.
The default value is 200.
This option affects the performance of the
.Fl c
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
option.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl o Ar var Ns = Ns Ar value ...
Set the given global libzpool variable to the provided value.
The value must be an unsigned 32-bit integer.
Currently only little-endian systems are supported to avoid accidentally setting
the high 32 bits of 64-bit variables.
.It Fl P
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Print numbers in an unscaled form more amenable to parsing, eg. 1000000 rather
than 1M.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl t Ar transaction
Specify the highest transaction to use when searching for uberblocks.
See also the
.Fl u
and
.Fl l
options for a means to see the available uberblocks and their associated
transaction numbers.
.It Fl U Ar cachefile
Use a cache file other than
.Pa /etc/zfs/zpool.cache .
.It Fl v
Enable verbosity.
Specify multiple times for increased verbosity.
.It Fl V
OpenZFS 6392 - zdb: introduce -V for verbatim import Authored by: Richard Yao <ryao@gentoo.org> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: Yuri Pankov <yuri.pankov@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Porting Notes: This was already implemented in ZFS on Linux. This patch is to resolved the deltas present in our version. OpenZFS-issue: https://www.illumos.org/issues/6392 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de Closes #6020
2017-04-14 00:28:46 +03:00
Attempt verbatim import.
This mimics the behavior of the kernel when loading a pool from a cachefile.
Only usable with
.Fl e .
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.It Fl X
Attempt
.Qq extreme
transaction rewind, that is attempt the same recovery as
.Fl F
but read transactions otherwise deemed too old.
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-17 01:10:02 +03:00
.It Fl Y
Attempt all possible combinations when reconstructing indirect split blocks.
This flag disables the individual I/O deadman timer in order to allow as
much time as required for the attempted reconstruction.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.El
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
Specifying a display option more than once enables verbosity for only that
option, with more occurrences enabling more verbosity.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Pp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
If no options are specified, all information about the named pool will be
displayed at default verbosity.
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Sh EXAMPLES
.Bl -tag -width Ds
.It Xo
.Sy Example 1
Display the configuration of imported pool
.Pa rpool
.Xc
.Bd -literal
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
# zdb -C rpool
MOS Configuration:
version: 28
name: 'rpool'
...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Ed
.It Xo
.Sy Example 2
Display basic dataset information about
.Pa rpool
.Xc
.Bd -literal
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
# zdb -d rpool
Dataset mos [META], ID 0, cr_txg 4, 26.9M, 1051 objects
Dataset rpool/swap [ZVOL], ID 59, cr_txg 356, 486M, 2 objects
...
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Ed
.It Xo
.Sy Example 3
Display basic information about object 0 in
.Pa rpool/export/home
.Xc
.Bd -literal
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
# zdb -d rpool/export/home 0
Dataset rpool/export/home [ZPL], ID 137, cr_txg 1546, 32K, 8 objects
Object lvl iblk dblk dsize lsize %full type
0 7 16K 16K 15.0K 16K 25.00 DMU dnode
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Ed
.It Xo
.Sy Example 4
Display the predicted effect of enabling deduplication on
.Pa rpool
.Xc
.Bd -literal
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
# zdb -S rpool
Simulated DDT histogram:
Man page white space and spelling corrections Correct some misspelled words and grammatical errors, and remove trailing white space in the man pages. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4115
2015-12-17 04:45:15 +03:00
bucket allocated referenced
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 09:44:53 +04:00
______ ______________________________ ______________________________
refcnt blocks LSIZE PSIZE DSIZE blocks LSIZE PSIZE DSIZE
------ ------ ----- ----- ----- ------ ----- ----- -----
1 694K 27.1G 15.0G 15.0G 694K 27.1G 15.0G 15.0G
2 35.0K 1.33G 699M 699M 74.7K 2.79G 1.45G 1.45G
...
dedup = 1.11, compress = 1.80, copies = 1.00, dedup * compress / copies = 2.00
OpenZFS 6410 - teach zdb to perform object lookups by path Authored by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Will Andrews <will@freebsd.org> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Replaced zdb.8 with upstream mdoc zdb.1m version. Updated to include Linux specific features: -V verbatium imports and improved label printing (-u, and -l). - Minor changes to `zdb -h` output to honor 80 character limit. OpenZFS-issue: https://www.illumos.org/issues/6410 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1 Closes #6006
2017-04-13 19:40:56 +03:00
.Ed
.El
.Sh SEE ALSO
.Xr zfs 8 ,
.Xr zpool 8
Reference in New Issue Copy Permalink