mirror_zfs/config/kernel-xattr-handler.m4

478 lines
14 KiB
Plaintext
Raw Normal View History

dnl #
dnl # 2.6.35 API change,
dnl # The 'struct xattr_handler' was constified in the generic
dnl # super_block structure.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_CONST_XATTR_HANDLER], [
ZFS_LINUX_TEST_SRC([const_xattr_handler], [
#include <linux/fs.h>
#include <linux/xattr.h>
const struct xattr_handler xattr_test_handler = {
.prefix = "test",
.get = NULL,
.set = NULL,
};
const struct xattr_handler *xattr_handlers[] = {
&xattr_test_handler,
};
const struct super_block sb __attribute__ ((unused)) = {
.s_xattr = xattr_handlers,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_CONST_XATTR_HANDLER], [
AC_MSG_CHECKING([whether super_block uses const struct xattr_handler])
ZFS_LINUX_TEST_RESULT([const_xattr_handler], [
AC_MSG_RESULT([yes])
],[
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
ZFS_LINUX_TEST_ERROR([const xattr_handler])
])
])
dnl #
dnl # 4.5 API change,
dnl # struct xattr_handler added new member "name".
dnl # xattr_handler which matches to whole name rather than prefix should use
dnl # "name" instead of "prefix", e.g. "system.posix_acl_access"
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_XATTR_HANDLER_NAME], [
ZFS_LINUX_TEST_SRC([xattr_handler_name], [
#include <linux/xattr.h>
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.name = XATTR_NAME_POSIX_ACL_ACCESS,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_XATTR_HANDLER_NAME], [
AC_MSG_CHECKING([whether xattr_handler has name])
ZFS_LINUX_TEST_RESULT([xattr_handler_name], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_HANDLER_NAME, 1,
[xattr_handler has name])
],[
AC_MSG_RESULT(no)
])
])
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
dnl # Supported xattr handler get() interfaces checked newest to oldest.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_XATTR_HANDLER_GET], [
ZFS_LINUX_TEST_SRC([xattr_handler_get_dentry_inode], [
#include <linux/xattr.h>
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
int get(const struct xattr_handler *handler,
struct dentry *dentry, struct inode *inode,
const char *name, void *buffer, size_t size) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.get = get,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_SRC([xattr_handler_get_xattr_handler], [
#include <linux/xattr.h>
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
int get(const struct xattr_handler *handler,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
struct dentry *dentry, const char *name,
void *buffer, size_t size) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.get = get,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_get_dentry], [
#include <linux/xattr.h>
int get(struct dentry *dentry, const char *name,
void *buffer, size_t size, int handler_flags)
{ return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.get = get,
};
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_get_dentry_inode_flags], [
#include <linux/xattr.h>
int get(const struct xattr_handler *handler,
struct dentry *dentry, struct inode *inode,
const char *name, void *buffer,
size_t size, int flags) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.get = get,
};
],[])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
])
AC_DEFUN([ZFS_AC_KERNEL_XATTR_HANDLER_GET], [
dnl #
dnl # 4.7 API change,
dnl # The xattr_handler->get() callback was changed to take both
dnl # dentry and inode.
dnl #
AC_MSG_CHECKING([whether xattr_handler->get() wants dentry and inode])
ZFS_LINUX_TEST_RESULT([xattr_handler_get_dentry_inode], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_GET_DENTRY_INODE, 1,
[xattr_handler->get() wants both dentry and inode])
],[
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
dnl # 4.4 API change,
dnl # The xattr_handler->get() callback was changed to take a
dnl # attr_handler, and handler_flags argument was removed and
dnl # should be accessed by handler->flags.
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
AC_MSG_RESULT(no)
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_MSG_CHECKING(
[whether xattr_handler->get() wants xattr_handler])
ZFS_LINUX_TEST_RESULT([xattr_handler_get_xattr_handler], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_GET_HANDLER, 1,
[xattr_handler->get() wants xattr_handler])
],[
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
dnl # 2.6.33 API change,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
dnl # The xattr_handler->get() callback was changed
dnl # to take a dentry instead of an inode, and a
dnl # handler_flags argument was added.
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
AC_MSG_RESULT(no)
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_MSG_CHECKING(
[whether xattr_handler->get() wants dentry])
ZFS_LINUX_TEST_RESULT([xattr_handler_get_dentry], [
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_GET_DENTRY, 1,
[xattr_handler->get() wants dentry])
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
],[
dnl #
dnl # Android API change,
dnl # The xattr_handler->get() callback was
dnl # changed to take dentry, inode and flags.
dnl #
AC_MSG_RESULT(no)
AC_MSG_CHECKING(
[whether xattr_handler->get() wants dentry and inode and flags])
ZFS_LINUX_TEST_RESULT([xattr_handler_get_dentry_inode_flags], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_GET_DENTRY_INODE_FLAGS, 1,
[xattr_handler->get() wants dentry and inode and flags])
],[
ZFS_LINUX_TEST_ERROR([xattr get()])
])
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
])
])
])
])
dnl #
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl # Supported xattr handler set() interfaces checked newest to oldest.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_XATTR_HANDLER_SET], [
ZFS_LINUX_TEST_SRC([xattr_handler_set_mnt_idmap], [
#include <linux/xattr.h>
int set(const struct xattr_handler *handler,
struct mnt_idmap *idmap,
struct dentry *dentry, struct inode *inode,
const char *name, const void *buffer,
size_t size, int flags)
{ return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.set = set,
};
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_set_userns], [
#include <linux/xattr.h>
int set(const struct xattr_handler *handler,
struct user_namespace *mnt_userns,
struct dentry *dentry, struct inode *inode,
const char *name, const void *buffer,
size_t size, int flags)
{ return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.set = set,
};
],[])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_SRC([xattr_handler_set_dentry_inode], [
#include <linux/xattr.h>
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
int set(const struct xattr_handler *handler,
struct dentry *dentry, struct inode *inode,
const char *name, const void *buffer,
size_t size, int flags)
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
{ return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.set = set,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_set_xattr_handler], [
#include <linux/xattr.h>
int set(const struct xattr_handler *handler,
struct dentry *dentry, const char *name,
const void *buffer, size_t size, int flags)
{ return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.set = set,
};
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_set_dentry], [
#include <linux/xattr.h>
int set(struct dentry *dentry, const char *name,
const void *buffer, size_t size, int flags,
int handler_flags) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.set = set,
};
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_XATTR_HANDLER_SET], [
dnl #
dnl # 5.12 API change,
dnl # The xattr_handler->set() callback was changed to 8 arguments, and
dnl # struct user_namespace* was inserted as arg #2
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
dnl #
dnl # 6.3 API change,
dnl # The xattr_handler->set() callback 2nd arg is now struct mnt_idmap *
dnl #
AC_MSG_CHECKING([whether xattr_handler->set() wants dentry, inode, and mnt_idmap])
ZFS_LINUX_TEST_RESULT([xattr_handler_set_mnt_idmap], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_SET_IDMAP, 1,
[xattr_handler->set() takes mnt_idmap])
], [
AC_MSG_CHECKING([whether xattr_handler->set() wants dentry, inode, and user_namespace])
ZFS_LINUX_TEST_RESULT([xattr_handler_set_userns], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_SET_USERNS, 1,
[xattr_handler->set() takes user_namespace])
],[
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
dnl # 4.7 API change,
dnl # The xattr_handler->set() callback was changed to take both
dnl # dentry and inode.
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether xattr_handler->set() wants dentry and inode])
ZFS_LINUX_TEST_RESULT([xattr_handler_set_dentry_inode], [
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_SET_DENTRY_INODE, 1,
[xattr_handler->set() wants both dentry and inode])
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
],[
dnl #
dnl # 4.4 API change,
dnl # The xattr_handler->set() callback was changed to take a
dnl # xattr_handler, and handler_flags argument was removed and
dnl # should be accessed by handler->flags.
dnl #
AC_MSG_RESULT(no)
AC_MSG_CHECKING(
[whether xattr_handler->set() wants xattr_handler])
ZFS_LINUX_TEST_RESULT([xattr_handler_set_xattr_handler], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_SET_HANDLER, 1,
[xattr_handler->set() wants xattr_handler])
],[
dnl #
dnl # 2.6.33 API change,
dnl # The xattr_handler->set() callback was changed
dnl # to take a dentry instead of an inode, and a
dnl # handler_flags argument was added.
dnl #
AC_MSG_RESULT(no)
AC_MSG_CHECKING(
[whether xattr_handler->set() wants dentry])
ZFS_LINUX_TEST_RESULT([xattr_handler_set_dentry], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_SET_DENTRY, 1,
[xattr_handler->set() wants dentry])
],[
ZFS_LINUX_TEST_ERROR([xattr set()])
])
])
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
])
])
])
])
dnl #
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl # Supported xattr handler list() interfaces checked newest to oldest.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_XATTR_HANDLER_LIST], [
ZFS_LINUX_TEST_SRC([xattr_handler_list_simple], [
#include <linux/xattr.h>
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
bool list(struct dentry *dentry) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.list = list,
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_list_xattr_handler], [
#include <linux/xattr.h>
size_t list(const struct xattr_handler *handler,
struct dentry *dentry, char *list, size_t list_size,
const char *name, size_t name_len) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.list = list,
};
],[])
ZFS_LINUX_TEST_SRC([xattr_handler_list_dentry], [
#include <linux/xattr.h>
size_t list(struct dentry *dentry,
char *list, size_t list_size,
const char *name, size_t name_len,
int handler_flags) { return 0; }
static const struct xattr_handler
xops __attribute__ ((unused)) = {
.list = list,
};
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_XATTR_HANDLER_LIST], [
dnl # 4.5 API change,
dnl # The xattr_handler->list() callback was changed to take only a
dnl # dentry and it only needs to return if it's accessible.
AC_MSG_CHECKING([whether xattr_handler->list() wants simple])
ZFS_LINUX_TEST_RESULT([xattr_handler_list_simple], [
AC_MSG_RESULT(yes)
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_DEFINE(HAVE_XATTR_LIST_SIMPLE, 1,
[xattr_handler->list() wants simple])
],[
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
dnl # 4.4 API change,
dnl # The xattr_handler->list() callback was changed to take a
dnl # xattr_handler, and handler_flags argument was removed
dnl # and should be accessed by handler->flags.
dnl #
AC_MSG_RESULT(no)
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_MSG_CHECKING(
[whether xattr_handler->list() wants xattr_handler])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_RESULT([xattr_handler_list_xattr_handler], [
AC_MSG_RESULT(yes)
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_DEFINE(HAVE_XATTR_LIST_HANDLER, 1,
[xattr_handler->list() wants xattr_handler])
],[
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
dnl #
dnl # 2.6.33 API change,
dnl # The xattr_handler->list() callback was changed
dnl # to take a dentry instead of an inode, and a
dnl # handler_flags argument was added.
dnl #
AC_MSG_RESULT(no)
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_MSG_CHECKING(
[whether xattr_handler->list() wants dentry])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
ZFS_LINUX_TEST_RESULT([xattr_handler_list_dentry], [
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XATTR_LIST_DENTRY, 1,
[xattr_handler->list() wants dentry])
],[
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
ZFS_LINUX_TEST_ERROR([xattr list()])
Linux 4.5 compat: xattr list handler The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-15 02:01:24 +03:00
])
])
])
])
dnl #
dnl # 3.7 API change,
dnl # The posix_acl_{from,to}_xattr functions gained a new
dnl # parameter: user_ns
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_POSIX_ACL_FROM_XATTR_USERNS], [
ZFS_LINUX_TEST_SRC([posix_acl_from_xattr_userns], [
#include <linux/cred.h>
#include <linux/fs.h>
#include <linux/posix_acl_xattr.h>
],[
posix_acl_from_xattr(&init_user_ns, NULL, 0);
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
])
])
AC_DEFUN([ZFS_AC_KERNEL_POSIX_ACL_FROM_XATTR_USERNS], [
AC_MSG_CHECKING([whether posix_acl_from_xattr() needs user_ns])
ZFS_LINUX_TEST_RESULT([posix_acl_from_xattr_userns], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_POSIX_ACL_FROM_XATTR_USERNS, 1,
[posix_acl_from_xattr() needs user_ns])
],[
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
ZFS_LINUX_TEST_ERROR([posix_acl_from_xattr()])
])
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
dnl #
dnl # 4.9 API change,
dnl # iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are
dnl # removed. xattr operations will directly go through sb->s_xattr.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_GENERIC_SETXATTR], [
ZFS_LINUX_TEST_SRC([have_generic_setxattr], [
#include <linux/fs.h>
#include <linux/xattr.h>
static const struct inode_operations
iops __attribute__ ((unused)) = {
.setxattr = generic_setxattr
};
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_GENERIC_SETXATTR], [
AC_MSG_CHECKING([whether generic_setxattr() exists])
ZFS_LINUX_TEST_RESULT([have_generic_setxattr], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_GENERIC_SETXATTR, 1,
[generic_setxattr() exists])
],[
AC_MSG_RESULT(no)
])
])
AC_DEFUN([ZFS_AC_KERNEL_SRC_XATTR], [
ZFS_AC_KERNEL_SRC_CONST_XATTR_HANDLER
ZFS_AC_KERNEL_SRC_XATTR_HANDLER_NAME
ZFS_AC_KERNEL_SRC_XATTR_HANDLER_GET
ZFS_AC_KERNEL_SRC_XATTR_HANDLER_SET
ZFS_AC_KERNEL_SRC_XATTR_HANDLER_LIST
ZFS_AC_KERNEL_SRC_POSIX_ACL_FROM_XATTR_USERNS
ZFS_AC_KERNEL_SRC_GENERIC_SETXATTR
])
AC_DEFUN([ZFS_AC_KERNEL_XATTR], [
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
ZFS_AC_KERNEL_XATTR_HANDLER_NAME
ZFS_AC_KERNEL_XATTR_HANDLER_GET
ZFS_AC_KERNEL_XATTR_HANDLER_SET
ZFS_AC_KERNEL_XATTR_HANDLER_LIST
ZFS_AC_KERNEL_POSIX_ACL_FROM_XATTR_USERNS
ZFS_AC_KERNEL_GENERIC_SETXATTR
])