mirror_zfs/module/zfs/zfs_log.c

793 lines
21 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2015, 2018 by Delphix. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
2008-11-20 23:01:55 +03:00
#include <sys/types.h>
#include <sys/param.h>
#include <sys/sysmacros.h>
#include <sys/cmn_err.h>
#include <sys/kmem.h>
#include <sys/thread.h>
#include <sys/file.h>
#include <sys/vfs.h>
#include <sys/zfs_znode.h>
#include <sys/zfs_dir.h>
#include <sys/zil.h>
#include <sys/zil_impl.h>
#include <sys/byteorder.h>
#include <sys/policy.h>
#include <sys/stat.h>
#include <sys/acl.h>
#include <sys/dmu.h>
#include <sys/dbuf.h>
2008-11-20 23:01:55 +03:00
#include <sys/spa.h>
#include <sys/zfs_fuid.h>
2009-01-16 00:59:39 +03:00
#include <sys/dsl_dataset.h>
2008-11-20 23:01:55 +03:00
/*
2009-01-16 00:59:39 +03:00
* These zfs_log_* functions must be called within a dmu tx, in one
* of 2 contexts depending on zilog->z_replay:
*
* Non replay mode
* ---------------
* We need to record the transaction so that if it is committed to
* the Intent Log then it can be replayed. An intent log transaction
* structure (itx_t) is allocated and all the information necessary to
* possibly replay the transaction is saved in it. The itx is then assigned
* a sequence number and inserted in the in-memory list anchored in the zilog.
*
* Replay mode
* -----------
* We need to mark the intent log record as replayed in the log header.
* This is done in the same transaction as the replay so that they
* commit atomically.
2008-11-20 23:01:55 +03:00
*/
int
zfs_log_create_txtype(zil_create_t type, vsecattr_t *vsecp, vattr_t *vap)
{
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
int isxvattr = (vap->va_mask & ATTR_XVATTR);
2008-11-20 23:01:55 +03:00
switch (type) {
case Z_FILE:
if (vsecp == NULL && !isxvattr)
return (TX_CREATE);
if (vsecp && isxvattr)
return (TX_CREATE_ACL_ATTR);
if (vsecp)
return (TX_CREATE_ACL);
else
return (TX_CREATE_ATTR);
case Z_DIR:
if (vsecp == NULL && !isxvattr)
return (TX_MKDIR);
if (vsecp && isxvattr)
return (TX_MKDIR_ACL_ATTR);
if (vsecp)
return (TX_MKDIR_ACL);
else
return (TX_MKDIR_ATTR);
case Z_XATTRDIR:
return (TX_MKXATTR);
}
ASSERT(0);
return (TX_MAX_TYPE);
}
/*
* build up the log data necessary for logging xvattr_t
* First lr_attr_t is initialized. following the lr_attr_t
* is the mapsize and attribute bitmap copied from the xvattr_t.
* Following the bitmap and bitmapsize two 64 bit words are reserved
* for the create time which may be set. Following the create time
* records a single 64 bit integer which has the bits to set on
* replay for the xvattr.
*/
static void
zfs_log_xvattr(lr_attr_t *lrattr, xvattr_t *xvap)
{
uint32_t *bitmap;
uint64_t *attrs;
uint64_t *crtime;
xoptattr_t *xoap;
void *scanstamp;
int i;
xoap = xva_getxoptattr(xvap);
ASSERT(xoap);
lrattr->lr_attr_masksize = xvap->xva_mapsize;
bitmap = &lrattr->lr_attr_bitmap;
for (i = 0; i != xvap->xva_mapsize; i++, bitmap++) {
*bitmap = xvap->xva_reqattrmap[i];
}
/* Now pack the attributes up in a single uint64_t */
attrs = (uint64_t *)bitmap;
*attrs = 0;
2008-11-20 23:01:55 +03:00
crtime = attrs + 1;
bzero(crtime, 2 * sizeof (uint64_t));
2008-11-20 23:01:55 +03:00
scanstamp = (caddr_t)(crtime + 2);
bzero(scanstamp, AV_SCANSTAMP_SZ);
2008-11-20 23:01:55 +03:00
if (XVA_ISSET_REQ(xvap, XAT_READONLY))
*attrs |= (xoap->xoa_readonly == 0) ? 0 :
XAT0_READONLY;
if (XVA_ISSET_REQ(xvap, XAT_HIDDEN))
*attrs |= (xoap->xoa_hidden == 0) ? 0 :
XAT0_HIDDEN;
if (XVA_ISSET_REQ(xvap, XAT_SYSTEM))
*attrs |= (xoap->xoa_system == 0) ? 0 :
XAT0_SYSTEM;
if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE))
*attrs |= (xoap->xoa_archive == 0) ? 0 :
XAT0_ARCHIVE;
if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
*attrs |= (xoap->xoa_immutable == 0) ? 0 :
XAT0_IMMUTABLE;
if (XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
*attrs |= (xoap->xoa_nounlink == 0) ? 0 :
XAT0_NOUNLINK;
if (XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
*attrs |= (xoap->xoa_appendonly == 0) ? 0 :
XAT0_APPENDONLY;
if (XVA_ISSET_REQ(xvap, XAT_OPAQUE))
*attrs |= (xoap->xoa_opaque == 0) ? 0 :
XAT0_APPENDONLY;
if (XVA_ISSET_REQ(xvap, XAT_NODUMP))
*attrs |= (xoap->xoa_nodump == 0) ? 0 :
XAT0_NODUMP;
if (XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED))
*attrs |= (xoap->xoa_av_quarantined == 0) ? 0 :
XAT0_AV_QUARANTINED;
if (XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
*attrs |= (xoap->xoa_av_modified == 0) ? 0 :
XAT0_AV_MODIFIED;
if (XVA_ISSET_REQ(xvap, XAT_CREATETIME))
ZFS_TIME_ENCODE(&xoap->xoa_createtime, crtime);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
ASSERT(!XVA_ISSET_REQ(xvap, XAT_PROJID));
2008-11-20 23:01:55 +03:00
bcopy(xoap->xoa_av_scanstamp, scanstamp, AV_SCANSTAMP_SZ);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else if (XVA_ISSET_REQ(xvap, XAT_PROJID)) {
/*
* XAT_PROJID and XAT_AV_SCANSTAMP will never be valid
* at the same time, so we can share the same space.
*/
bcopy(&xoap->xoa_projid, scanstamp, sizeof (uint64_t));
}
if (XVA_ISSET_REQ(xvap, XAT_REPARSE))
*attrs |= (xoap->xoa_reparse == 0) ? 0 :
XAT0_REPARSE;
if (XVA_ISSET_REQ(xvap, XAT_OFFLINE))
*attrs |= (xoap->xoa_offline == 0) ? 0 :
XAT0_OFFLINE;
if (XVA_ISSET_REQ(xvap, XAT_SPARSE))
*attrs |= (xoap->xoa_sparse == 0) ? 0 :
XAT0_SPARSE;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (XVA_ISSET_REQ(xvap, XAT_PROJINHERIT))
*attrs |= (xoap->xoa_projinherit == 0) ? 0 :
XAT0_PROJINHERIT;
2008-11-20 23:01:55 +03:00
}
static void *
zfs_log_fuid_ids(zfs_fuid_info_t *fuidp, void *start)
{
zfs_fuid_t *zfuid;
uint64_t *fuidloc = start;
/* First copy in the ACE FUIDs */
for (zfuid = list_head(&fuidp->z_fuids); zfuid;
zfuid = list_next(&fuidp->z_fuids, zfuid)) {
*fuidloc++ = zfuid->z_logfuid;
}
return (fuidloc);
}
static void *
zfs_log_fuid_domains(zfs_fuid_info_t *fuidp, void *start)
{
zfs_fuid_domain_t *zdomain;
/* now copy in the domain info, if any */
if (fuidp->z_domain_str_sz != 0) {
for (zdomain = list_head(&fuidp->z_domains); zdomain;
zdomain = list_next(&fuidp->z_domains, zdomain)) {
bcopy((void *)zdomain->z_domain, start,
strlen(zdomain->z_domain) + 1);
start = (caddr_t)start +
strlen(zdomain->z_domain) + 1;
}
}
return (start);
}
/*
* If zp is an xattr node, check whether the xattr owner is unlinked.
* We don't want to log anything if the owner is unlinked.
*/
static int
zfs_xattr_owner_unlinked(znode_t *zp)
{
int unlinked = 0;
znode_t *dzp;
#ifdef __FreeBSD__
znode_t *tzp = zp;
/*
* zrele drops the vnode lock which violates the VOP locking contract
* on FreeBSD. See comment at the top of zfs_replay.c for more detail.
*/
/*
* if zp is XATTR node, keep walking up via z_xattr_parent until we
* get the owner
*/
while (tzp->z_pflags & ZFS_XATTR) {
ASSERT3U(zp->z_xattr_parent, !=, 0);
if (zfs_zget(ZTOZSB(tzp), tzp->z_xattr_parent, &dzp) != 0) {
unlinked = 1;
break;
}
if (tzp != zp)
zrele(tzp);
tzp = dzp;
unlinked = tzp->z_unlinked;
}
if (tzp != zp)
zrele(tzp);
#else
zhold(zp);
/*
* if zp is XATTR node, keep walking up via z_xattr_parent until we
* get the owner
*/
while (zp->z_pflags & ZFS_XATTR) {
ASSERT3U(zp->z_xattr_parent, !=, 0);
if (zfs_zget(ZTOZSB(zp), zp->z_xattr_parent, &dzp) != 0) {
unlinked = 1;
break;
}
zrele(zp);
zp = dzp;
unlinked = zp->z_unlinked;
}
zrele(zp);
#endif
return (unlinked);
}
2008-11-20 23:01:55 +03:00
/*
* Handles TX_CREATE, TX_CREATE_ATTR, TX_MKDIR, TX_MKDIR_ATTR and
* TK_MKXATTR transactions.
2008-11-20 23:01:55 +03:00
*
* TX_CREATE and TX_MKDIR are standard creates, but they may have FUID
* domain information appended prior to the name. In this case the
* uid/gid in the log record will be a log centric FUID.
*
* TX_CREATE_ACL_ATTR and TX_MKDIR_ACL_ATTR handle special creates that
* may contain attributes, ACL and optional fuid information.
*
* TX_CREATE_ACL and TX_MKDIR_ACL handle special creates that specify
* and ACL and normal users/groups in the ACEs.
*
* There may be an optional xvattr attribute information similar
* to zfs_log_setattr.
*
* Also, after the file name "domain" strings may be appended.
*/
void
zfs_log_create(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, const char *name, vsecattr_t *vsecp,
2008-11-20 23:01:55 +03:00
zfs_fuid_info_t *fuidp, vattr_t *vap)
{
itx_t *itx;
lr_create_t *lr;
lr_acl_create_t *lracl;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
size_t aclsize = 0;
2008-11-20 23:01:55 +03:00
size_t xvatsize = 0;
size_t txsize;
xvattr_t *xvap = (xvattr_t *)vap;
2008-11-20 23:01:55 +03:00
void *end;
size_t lrsize;
size_t namesize = strlen(name) + 1;
size_t fuidsz = 0;
if (zil_replaying(zilog, tx) || zfs_xattr_owner_unlinked(dzp))
2008-11-20 23:01:55 +03:00
return;
/*
* If we have FUIDs present then add in space for
* domains and ACE fuid's if any.
*/
if (fuidp) {
fuidsz += fuidp->z_domain_str_sz;
fuidsz += fuidp->z_fuid_cnt * sizeof (uint64_t);
}
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
if (vap->va_mask & ATTR_XVATTR)
2008-11-20 23:01:55 +03:00
xvatsize = ZIL_XVAT_SIZE(xvap->xva_mapsize);
if ((int)txtype == TX_CREATE_ATTR || (int)txtype == TX_MKDIR_ATTR ||
(int)txtype == TX_CREATE || (int)txtype == TX_MKDIR ||
(int)txtype == TX_MKXATTR) {
txsize = sizeof (*lr) + namesize + fuidsz + xvatsize;
lrsize = sizeof (*lr);
} else {
txsize =
sizeof (lr_acl_create_t) + namesize + fuidsz +
ZIL_ACE_LENGTH(aclsize) + xvatsize;
lrsize = sizeof (lr_acl_create_t);
}
itx = zil_itx_create(txtype, txsize);
lr = (lr_create_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_foid = zp->z_id;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
/* Store dnode slot count in 8 bits above object id. */
LR_FOID_SET_SLOTS(lr->lr_foid, zp->z_dnodesize >> DNODE_SHIFT);
lr->lr_mode = zp->z_mode;
if (!IS_EPHEMERAL(KUID_TO_SUID(ZTOUID(zp)))) {
lr->lr_uid = (uint64_t)KUID_TO_SUID(ZTOUID(zp));
2008-11-20 23:01:55 +03:00
} else {
lr->lr_uid = fuidp->z_fuid_owner;
}
if (!IS_EPHEMERAL(KGID_TO_SGID(ZTOGID(zp)))) {
lr->lr_gid = (uint64_t)KGID_TO_SGID(ZTOGID(zp));
2008-11-20 23:01:55 +03:00
} else {
lr->lr_gid = fuidp->z_fuid_group;
}
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(ZTOZSB(zp)), &lr->lr_gen,
sizeof (uint64_t));
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_CRTIME(ZTOZSB(zp)),
lr->lr_crtime, sizeof (uint64_t) * 2);
if (sa_lookup(zp->z_sa_hdl, SA_ZPL_RDEV(ZTOZSB(zp)), &lr->lr_rdev,
sizeof (lr->lr_rdev)) != 0)
lr->lr_rdev = 0;
2008-11-20 23:01:55 +03:00
/*
* Fill in xvattr info if any
*/
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
if (vap->va_mask & ATTR_XVATTR) {
2008-11-20 23:01:55 +03:00
zfs_log_xvattr((lr_attr_t *)((caddr_t)lr + lrsize), xvap);
end = (caddr_t)lr + lrsize + xvatsize;
} else {
end = (caddr_t)lr + lrsize;
}
/* Now fill in any ACL info */
if (vsecp) {
lracl = (lr_acl_create_t *)&itx->itx_lr;
lracl->lr_aclcnt = vsecp->vsa_aclcnt;
lracl->lr_acl_bytes = aclsize;
lracl->lr_domcnt = fuidp ? fuidp->z_domain_cnt : 0;
lracl->lr_fuidcnt = fuidp ? fuidp->z_fuid_cnt : 0;
if (vsecp->vsa_aclflags & VSA_ACE_ACLFLAGS)
lracl->lr_acl_flags = (uint64_t)vsecp->vsa_aclflags;
else
lracl->lr_acl_flags = 0;
bcopy(vsecp->vsa_aclentp, end, aclsize);
end = (caddr_t)end + ZIL_ACE_LENGTH(aclsize);
}
/* drop in FUID info */
if (fuidp) {
end = zfs_log_fuid_ids(fuidp, end);
end = zfs_log_fuid_domains(fuidp, end);
}
/*
* Now place file name in log record
*/
bcopy(name, end, namesize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles both TX_REMOVE and TX_RMDIR transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_remove(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, const char *name, uint64_t foid, boolean_t unlinked)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_remove_t *lr;
size_t namesize = strlen(name) + 1;
if (zil_replaying(zilog, tx) || zfs_xattr_owner_unlinked(dzp))
2008-11-20 23:01:55 +03:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize);
lr = (lr_remove_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
bcopy(name, (char *)(lr + 1), namesize);
itx->itx_oid = foid;
/*
* Object ids can be re-instantiated in the next txg so
* remove any async transactions to avoid future leaks.
* This can happen if a fsync occurs on the re-instantiated
* object for a WR_INDIRECT or WR_NEED_COPY write, which gets
* the new file data and flushes a write record for the old object.
*/
if (unlinked) {
ASSERT((txtype & ~TX_CI) == TX_REMOVE);
zil_remove_async(zilog, foid);
}
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_LINK transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_link(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, const char *name)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_link_t *lr;
size_t namesize = strlen(name) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 23:01:55 +03:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize);
lr = (lr_link_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_link_obj = zp->z_id;
bcopy(name, (char *)(lr + 1), namesize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_SYMLINK transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_symlink(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype,
znode_t *dzp, znode_t *zp, const char *name, const char *link)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_create_t *lr;
size_t namesize = strlen(name) + 1;
size_t linksize = strlen(link) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 23:01:55 +03:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + namesize + linksize);
lr = (lr_create_t *)&itx->itx_lr;
lr->lr_doid = dzp->z_id;
lr->lr_foid = zp->z_id;
lr->lr_uid = KUID_TO_SUID(ZTOUID(zp));
lr->lr_gid = KGID_TO_SGID(ZTOGID(zp));
lr->lr_mode = zp->z_mode;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(ZTOZSB(zp)), &lr->lr_gen,
sizeof (uint64_t));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_CRTIME(ZTOZSB(zp)),
lr->lr_crtime, sizeof (uint64_t) * 2);
2008-11-20 23:01:55 +03:00
bcopy(name, (char *)(lr + 1), namesize);
bcopy(link, (char *)(lr + 1) + namesize, linksize);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_RENAME transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_rename(zilog_t *zilog, dmu_tx_t *tx, uint64_t txtype, znode_t *sdzp,
const char *sname, znode_t *tdzp, const char *dname, znode_t *szp)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_rename_t *lr;
size_t snamesize = strlen(sname) + 1;
size_t dnamesize = strlen(dname) + 1;
if (zil_replaying(zilog, tx))
2008-11-20 23:01:55 +03:00
return;
itx = zil_itx_create(txtype, sizeof (*lr) + snamesize + dnamesize);
lr = (lr_rename_t *)&itx->itx_lr;
lr->lr_sdoid = sdzp->z_id;
lr->lr_tdoid = tdzp->z_id;
bcopy(sname, (char *)(lr + 1), snamesize);
bcopy(dname, (char *)(lr + 1) + snamesize, dnamesize);
itx->itx_oid = szp->z_id;
2008-11-20 23:01:55 +03:00
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
Only commit the ZIL once in zpl_writepages() (msync() case). Currently, using msync() results in the following code path: sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage In such a code path, zil_commit() is called as part of zpl_putpage(). This means that for each page, the write is handed to the DMU, the ZIL is committed, and only then do we move on to the next page. As one might imagine, this results in atrocious performance where there is a large number of pages to write: instead of committing a batch of N writes, we do N commits containing one page each. In some extreme cases this can result in msync() being ~700 times slower than it should be, as well as very inefficient use of ZIL resources. This patch fixes this issue by making sure that the requested writes are batched and then committed only once. Unfortunately, the implementation is somewhat non-trivial because there is no way to run write_cache_pages in SYNC mode (so that we get all pages) without making it wait on the writeback tag for each page. The solution implemented here is composed of two parts: - I added a new callback system to the ZIL, which allows the caller to be notified when its ITX gets written to stable storage. One nice thing is that the callback is called not only in zil_commit() but in zil_sync() as well, which means that the caller doesn't have to care whether the write ended up in the ZIL or the DMU: it will get notified as soon as it's safe, period. This is an improvement over dmu_tx_callback_register() that was used previously, which only supports DMU writes. The rationale for this change is to allow zpl_putpage() to be notified when a ZIL commit is completed without having to block on zil_commit() itself. - zpl_writepages() now calls write_cache_pages in non-SYNC mode, which will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage from issuing ZIL commits. zpl_writepages() will issue the commit itself instead of relying on zpl_putpage() to do it, thus nicely batching the writes. Note, however, that we still have to call write_cache_pages() again in SYNC mode because there is an edge case documented in the implementation of write_cache_pages() whereas it will not give us all dirty pages when running in non-SYNC mode. Thus we need to run it at least once in SYNC mode to make sure we honor persistency guarantees. This only happens when the pages are modified at the same time msync() is running, which should be rare. In most cases there won't be any additional pages and this second call will do nothing. Note that this change also fixes a bug related to #907 whereas calling msync() on pages that were already handed over to the DMU in a previous writepages() call would make msync() block until the next TXG sync instead of returning as soon as the ZIL commit is complete. The new callback system fixes that problem. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1849 Closes #907
2013-11-10 19:00:11 +04:00
* zfs_log_write() handles TX_WRITE transactions. The specified callback is
* called as soon as the write is on stable storage (be it via a DMU sync or a
* ZIL commit).
2008-11-20 23:01:55 +03:00
*/
long zfs_immediate_write_sz = 32768;
2008-11-20 23:01:55 +03:00
void
zfs_log_write(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, offset_t off, ssize_t resid, int ioflag,
zil_callback_t callback, void *callback_data)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)sa_get_db(zp->z_sa_hdl);
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
uint32_t blocksize = zp->z_blksz;
2008-11-20 23:01:55 +03:00
itx_wr_state_t write_state;
uintptr_t fsync_cnt;
uint64_t gen = 0;
ssize_t size = resid;
2008-11-20 23:01:55 +03:00
if (zil_replaying(zilog, tx) || zp->z_unlinked ||
zfs_xattr_owner_unlinked(zp)) {
Only commit the ZIL once in zpl_writepages() (msync() case). Currently, using msync() results in the following code path: sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage In such a code path, zil_commit() is called as part of zpl_putpage(). This means that for each page, the write is handed to the DMU, the ZIL is committed, and only then do we move on to the next page. As one might imagine, this results in atrocious performance where there is a large number of pages to write: instead of committing a batch of N writes, we do N commits containing one page each. In some extreme cases this can result in msync() being ~700 times slower than it should be, as well as very inefficient use of ZIL resources. This patch fixes this issue by making sure that the requested writes are batched and then committed only once. Unfortunately, the implementation is somewhat non-trivial because there is no way to run write_cache_pages in SYNC mode (so that we get all pages) without making it wait on the writeback tag for each page. The solution implemented here is composed of two parts: - I added a new callback system to the ZIL, which allows the caller to be notified when its ITX gets written to stable storage. One nice thing is that the callback is called not only in zil_commit() but in zil_sync() as well, which means that the caller doesn't have to care whether the write ended up in the ZIL or the DMU: it will get notified as soon as it's safe, period. This is an improvement over dmu_tx_callback_register() that was used previously, which only supports DMU writes. The rationale for this change is to allow zpl_putpage() to be notified when a ZIL commit is completed without having to block on zil_commit() itself. - zpl_writepages() now calls write_cache_pages in non-SYNC mode, which will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage from issuing ZIL commits. zpl_writepages() will issue the commit itself instead of relying on zpl_putpage() to do it, thus nicely batching the writes. Note, however, that we still have to call write_cache_pages() again in SYNC mode because there is an edge case documented in the implementation of write_cache_pages() whereas it will not give us all dirty pages when running in non-SYNC mode. Thus we need to run it at least once in SYNC mode to make sure we honor persistency guarantees. This only happens when the pages are modified at the same time msync() is running, which should be rare. In most cases there won't be any additional pages and this second call will do nothing. Note that this change also fixes a bug related to #907 whereas calling msync() on pages that were already handed over to the DMU in a previous writepages() call would make msync() block until the next TXG sync instead of returning as soon as the ZIL commit is complete. The new callback system fixes that problem. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1849 Closes #907
2013-11-10 19:00:11 +04:00
if (callback != NULL)
callback(callback_data);
2008-11-20 23:01:55 +03:00
return;
Only commit the ZIL once in zpl_writepages() (msync() case). Currently, using msync() results in the following code path: sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage In such a code path, zil_commit() is called as part of zpl_putpage(). This means that for each page, the write is handed to the DMU, the ZIL is committed, and only then do we move on to the next page. As one might imagine, this results in atrocious performance where there is a large number of pages to write: instead of committing a batch of N writes, we do N commits containing one page each. In some extreme cases this can result in msync() being ~700 times slower than it should be, as well as very inefficient use of ZIL resources. This patch fixes this issue by making sure that the requested writes are batched and then committed only once. Unfortunately, the implementation is somewhat non-trivial because there is no way to run write_cache_pages in SYNC mode (so that we get all pages) without making it wait on the writeback tag for each page. The solution implemented here is composed of two parts: - I added a new callback system to the ZIL, which allows the caller to be notified when its ITX gets written to stable storage. One nice thing is that the callback is called not only in zil_commit() but in zil_sync() as well, which means that the caller doesn't have to care whether the write ended up in the ZIL or the DMU: it will get notified as soon as it's safe, period. This is an improvement over dmu_tx_callback_register() that was used previously, which only supports DMU writes. The rationale for this change is to allow zpl_putpage() to be notified when a ZIL commit is completed without having to block on zil_commit() itself. - zpl_writepages() now calls write_cache_pages in non-SYNC mode, which will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage from issuing ZIL commits. zpl_writepages() will issue the commit itself instead of relying on zpl_putpage() to do it, thus nicely batching the writes. Note, however, that we still have to call write_cache_pages() again in SYNC mode because there is an edge case documented in the implementation of write_cache_pages() whereas it will not give us all dirty pages when running in non-SYNC mode. Thus we need to run it at least once in SYNC mode to make sure we honor persistency guarantees. This only happens when the pages are modified at the same time msync() is running, which should be rare. In most cases there won't be any additional pages and this second call will do nothing. Note that this change also fixes a bug related to #907 whereas calling msync() on pages that were already handed over to the DMU in a previous writepages() call would make msync() block until the next TXG sync instead of returning as soon as the ZIL commit is complete. The new callback system fixes that problem. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1849 Closes #907
2013-11-10 19:00:11 +04:00
}
2008-11-20 23:01:55 +03:00
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
if (zilog->zl_logbias == ZFS_LOGBIAS_THROUGHPUT)
write_state = WR_INDIRECT;
else if (!spa_has_slogs(zilog->zl_spa) &&
resid >= zfs_immediate_write_sz)
2008-11-20 23:01:55 +03:00
write_state = WR_INDIRECT;
else if (ioflag & (O_SYNC | O_DSYNC))
2008-11-20 23:01:55 +03:00
write_state = WR_COPIED;
else
write_state = WR_NEED_COPY;
if ((fsync_cnt = (uintptr_t)tsd_get(zfs_fsyncer_key)) != 0) {
(void) tsd_set(zfs_fsyncer_key, (void *)(fsync_cnt - 1));
}
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(ZTOZSB(zp)), &gen,
sizeof (gen));
2008-11-20 23:01:55 +03:00
while (resid) {
itx_t *itx;
lr_write_t *lr;
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
itx_wr_state_t wr_state = write_state;
ssize_t len = resid;
2008-11-20 23:01:55 +03:00
/*
* A WR_COPIED record must fit entirely in one log block.
* Large writes can use WR_NEED_COPY, which the ZIL will
* split into multiple records across several log blocks
* if necessary.
*/
if (wr_state == WR_COPIED &&
resid > zil_max_copied_data(zilog))
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
wr_state = WR_NEED_COPY;
else if (wr_state == WR_INDIRECT)
len = MIN(blocksize - P2PHASE(off, blocksize), resid);
2008-11-20 23:01:55 +03:00
itx = zil_itx_create(txtype, sizeof (*lr) +
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
(wr_state == WR_COPIED ? len : 0));
2008-11-20 23:01:55 +03:00
lr = (lr_write_t *)&itx->itx_lr;
/*
* For WR_COPIED records, copy the data into the lr_write_t.
*/
if (wr_state == WR_COPIED) {
int err;
DB_DNODE_ENTER(db);
err = dmu_read_by_dnode(DB_DNODE(db), off, len, lr + 1,
DMU_READ_NO_PREFETCH);
if (err != 0) {
zil_itx_destroy(itx);
itx = zil_itx_create(txtype, sizeof (*lr));
lr = (lr_write_t *)&itx->itx_lr;
wr_state = WR_NEED_COPY;
}
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
}
OpenZFS 7578 - Fix/improve some aspects of ZIL writing - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
2017-06-09 19:15:37 +03:00
itx->itx_wr_state = wr_state;
2008-11-20 23:01:55 +03:00
lr->lr_foid = zp->z_id;
lr->lr_offset = off;
lr->lr_length = len;
lr->lr_blkoff = 0;
BP_ZERO(&lr->lr_blkptr);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
itx->itx_private = ZTOZSB(zp);
itx->itx_gen = gen;
2008-11-20 23:01:55 +03:00
if (!(ioflag & (O_SYNC | O_DSYNC)) && (zp->z_sync_cnt == 0) &&
(fsync_cnt == 0))
2008-11-20 23:01:55 +03:00
itx->itx_sync = B_FALSE;
Only commit the ZIL once in zpl_writepages() (msync() case). Currently, using msync() results in the following code path: sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage In such a code path, zil_commit() is called as part of zpl_putpage(). This means that for each page, the write is handed to the DMU, the ZIL is committed, and only then do we move on to the next page. As one might imagine, this results in atrocious performance where there is a large number of pages to write: instead of committing a batch of N writes, we do N commits containing one page each. In some extreme cases this can result in msync() being ~700 times slower than it should be, as well as very inefficient use of ZIL resources. This patch fixes this issue by making sure that the requested writes are batched and then committed only once. Unfortunately, the implementation is somewhat non-trivial because there is no way to run write_cache_pages in SYNC mode (so that we get all pages) without making it wait on the writeback tag for each page. The solution implemented here is composed of two parts: - I added a new callback system to the ZIL, which allows the caller to be notified when its ITX gets written to stable storage. One nice thing is that the callback is called not only in zil_commit() but in zil_sync() as well, which means that the caller doesn't have to care whether the write ended up in the ZIL or the DMU: it will get notified as soon as it's safe, period. This is an improvement over dmu_tx_callback_register() that was used previously, which only supports DMU writes. The rationale for this change is to allow zpl_putpage() to be notified when a ZIL commit is completed without having to block on zil_commit() itself. - zpl_writepages() now calls write_cache_pages in non-SYNC mode, which will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage from issuing ZIL commits. zpl_writepages() will issue the commit itself instead of relying on zpl_putpage() to do it, thus nicely batching the writes. Note, however, that we still have to call write_cache_pages() again in SYNC mode because there is an edge case documented in the implementation of write_cache_pages() whereas it will not give us all dirty pages when running in non-SYNC mode. Thus we need to run it at least once in SYNC mode to make sure we honor persistency guarantees. This only happens when the pages are modified at the same time msync() is running, which should be rare. In most cases there won't be any additional pages and this second call will do nothing. Note that this change also fixes a bug related to #907 whereas calling msync() on pages that were already handed over to the DMU in a previous writepages() call would make msync() block until the next TXG sync instead of returning as soon as the ZIL commit is complete. The new callback system fixes that problem. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1849 Closes #907
2013-11-10 19:00:11 +04:00
itx->itx_callback = callback;
itx->itx_callback_data = callback_data;
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
off += len;
resid -= len;
}
if (write_state == WR_COPIED || write_state == WR_NEED_COPY) {
dsl_pool_wrlog_count(zilog->zl_dmu_pool, size, tx->tx_txg);
}
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_TRUNCATE transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_truncate(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, uint64_t off, uint64_t len)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_truncate_t *lr;
if (zil_replaying(zilog, tx) || zp->z_unlinked ||
zfs_xattr_owner_unlinked(zp))
2008-11-20 23:01:55 +03:00
return;
itx = zil_itx_create(txtype, sizeof (*lr));
lr = (lr_truncate_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
lr->lr_offset = off;
lr->lr_length = len;
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_SETATTR transactions.
2008-11-20 23:01:55 +03:00
*/
void
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
zfs_log_setattr(zilog_t *zilog, dmu_tx_t *tx, int txtype,
znode_t *zp, vattr_t *vap, uint_t mask_applied, zfs_fuid_info_t *fuidp)
2008-11-20 23:01:55 +03:00
{
itx_t *itx;
lr_setattr_t *lr;
xvattr_t *xvap = (xvattr_t *)vap;
size_t recsize = sizeof (lr_setattr_t);
void *start;
if (zil_replaying(zilog, tx) || zp->z_unlinked)
2008-11-20 23:01:55 +03:00
return;
/*
* If XVATTR set, then log record size needs to allow
* for lr_attr_t + xvattr mask, mapsize and create time
* plus actual attribute values
*/
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
if (vap->va_mask & ATTR_XVATTR)
2008-11-20 23:01:55 +03:00
recsize = sizeof (*lr) + ZIL_XVAT_SIZE(xvap->xva_mapsize);
if (fuidp)
recsize += fuidp->z_domain_str_sz;
itx = zil_itx_create(txtype, recsize);
lr = (lr_setattr_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
lr->lr_mask = (uint64_t)mask_applied;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
lr->lr_mode = (uint64_t)vap->va_mode;
if ((mask_applied & ATTR_UID) && IS_EPHEMERAL(vap->va_uid))
2008-11-20 23:01:55 +03:00
lr->lr_uid = fuidp->z_fuid_owner;
else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
lr->lr_uid = (uint64_t)vap->va_uid;
2008-11-20 23:01:55 +03:00
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
if ((mask_applied & ATTR_GID) && IS_EPHEMERAL(vap->va_gid))
2008-11-20 23:01:55 +03:00
lr->lr_gid = fuidp->z_fuid_group;
else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
lr->lr_gid = (uint64_t)vap->va_gid;
2008-11-20 23:01:55 +03:00
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
lr->lr_size = (uint64_t)vap->va_size;
ZFS_TIME_ENCODE(&vap->va_atime, lr->lr_atime);
ZFS_TIME_ENCODE(&vap->va_mtime, lr->lr_mtime);
2008-11-20 23:01:55 +03:00
start = (lr_setattr_t *)(lr + 1);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
if (vap->va_mask & ATTR_XVATTR) {
2008-11-20 23:01:55 +03:00
zfs_log_xvattr((lr_attr_t *)start, xvap);
start = (caddr_t)start + ZIL_XVAT_SIZE(xvap->xva_mapsize);
}
/*
* Now stick on domain information if any on end
*/
if (fuidp)
(void) zfs_log_fuid_domains(fuidp, start);
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/*
* Handles TX_ACL transactions.
2008-11-20 23:01:55 +03:00
*/
void
zfs_log_acl(zilog_t *zilog, dmu_tx_t *tx, znode_t *zp,
vsecattr_t *vsecp, zfs_fuid_info_t *fuidp)
{
itx_t *itx;
lr_acl_v0_t *lrv0;
lr_acl_t *lr;
int txtype;
int lrsize;
size_t txsize;
size_t aclbytes = vsecp->vsa_aclentsz;
if (zil_replaying(zilog, tx) || zp->z_unlinked)
return;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
txtype = (ZTOZSB(zp)->z_version < ZPL_VERSION_FUID) ?
2008-11-20 23:01:55 +03:00
TX_ACL_V0 : TX_ACL;
if (txtype == TX_ACL)
lrsize = sizeof (*lr);
else
lrsize = sizeof (*lrv0);
txsize = lrsize +
((txtype == TX_ACL) ? ZIL_ACE_LENGTH(aclbytes) : aclbytes) +
(fuidp ? fuidp->z_domain_str_sz : 0) +
sizeof (uint64_t) * (fuidp ? fuidp->z_fuid_cnt : 0);
2008-11-20 23:01:55 +03:00
itx = zil_itx_create(txtype, txsize);
lr = (lr_acl_t *)&itx->itx_lr;
lr->lr_foid = zp->z_id;
if (txtype == TX_ACL) {
lr->lr_acl_bytes = aclbytes;
lr->lr_domcnt = fuidp ? fuidp->z_domain_cnt : 0;
lr->lr_fuidcnt = fuidp ? fuidp->z_fuid_cnt : 0;
if (vsecp->vsa_mask & VSA_ACE_ACLFLAGS)
lr->lr_acl_flags = (uint64_t)vsecp->vsa_aclflags;
else
lr->lr_acl_flags = 0;
}
lr->lr_aclcnt = (uint64_t)vsecp->vsa_aclcnt;
if (txtype == TX_ACL_V0) {
lrv0 = (lr_acl_v0_t *)lr;
bcopy(vsecp->vsa_aclentp, (ace_t *)(lrv0 + 1), aclbytes);
} else {
void *start = (ace_t *)(lr + 1);
bcopy(vsecp->vsa_aclentp, start, aclbytes);
start = (caddr_t)start + ZIL_ACE_LENGTH(aclbytes);
if (fuidp) {
start = zfs_log_fuid_ids(fuidp, start);
(void) zfs_log_fuid_domains(fuidp, start);
}
}
itx->itx_sync = (zp->z_sync_cnt != 0);
zil_itx_assign(zilog, itx, tx);
2008-11-20 23:01:55 +03:00
}
/* BEGIN CSTYLED */
ZFS_MODULE_PARAM(zfs, zfs_, immediate_write_sz, LONG, ZMOD_RW,
"Largest data block to write to zil");
/* END CSTYLED */