mirror_zfs/cmd/zdb/zdb.c

6229 lines
166 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
2008-11-20 23:01:55 +03:00
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2018 by Delphix. All rights reserved.
* Copyright (c) 2014 Integros [integros.com]
* Copyright 2016 Nexenta Systems, Inc.
* Copyright (c) 2017, 2018 Lawrence Livermore National Security, LLC.
* Copyright (c) 2015, 2017, Intel Corporation.
2008-11-20 23:01:55 +03:00
*/
#include <stdio.h>
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
#include <unistd.h>
2008-11-20 23:01:55 +03:00
#include <stdio_ext.h>
#include <stdlib.h>
#include <ctype.h>
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/dmu.h>
#include <sys/zap.h>
#include <sys/fs/zfs.h>
#include <sys/zfs_znode.h>
#include <sys/zfs_sa.h>
#include <sys/sa.h>
#include <sys/sa_impl.h>
2008-11-20 23:01:55 +03:00
#include <sys/vdev.h>
#include <sys/vdev_impl.h>
#include <sys/metaslab_impl.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_pool.h>
#include <sys/dbuf.h>
#include <sys/zil.h>
#include <sys/zil_impl.h>
#include <sys/stat.h>
#include <sys/resource.h>
#include <sys/dmu_traverse.h>
#include <sys/zio_checksum.h>
#include <sys/zio_compress.h>
#include <sys/zfs_fuid.h>
#include <sys/arc.h>
#include <sys/ddt.h>
#include <sys/zfeature.h>
#include <sys/abd.h>
#include <sys/blkptr.h>
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
#include <sys/dsl_crypt.h>
#include <sys/dsl_scan.h>
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
#include <zfs_comutil.h>
2008-11-20 23:01:55 +03:00
#include <libzfs.h>
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
#include "zdb.h"
#define ZDB_COMPRESS_NAME(idx) ((idx) < ZIO_COMPRESS_FUNCTIONS ? \
zio_compress_table[(idx)].ci_name : "UNKNOWN")
#define ZDB_CHECKSUM_NAME(idx) ((idx) < ZIO_CHECKSUM_FUNCTIONS ? \
zio_checksum_table[(idx)].ci_name : "UNKNOWN")
#define ZDB_OT_TYPE(idx) ((idx) < DMU_OT_NUMTYPES ? (idx) : \
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
(idx) == DMU_OTN_ZAP_DATA || (idx) == DMU_OTN_ZAP_METADATA ? \
DMU_OT_ZAP_OTHER : \
(idx) == DMU_OTN_UINT64_DATA || (idx) == DMU_OTN_UINT64_METADATA ? \
DMU_OT_UINT64_OTHER : DMU_OT_NUMTYPES)
static char *
zdb_ot_name(dmu_object_type_t type)
{
if (type < DMU_OT_NUMTYPES)
return (dmu_ot[type].ot_name);
else if ((type & DMU_OT_NEWTYPE) &&
((type & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS))
return (dmu_ot_byteswap[type & DMU_OT_BYTESWAP_MASK].ob_name);
else
return ("UNKNOWN");
}
extern int reference_tracking_enable;
extern int zfs_recover;
extern uint64_t zfs_arc_max, zfs_arc_meta_limit;
extern int zfs_vdev_async_read_max_active;
extern boolean_t spa_load_verify_dryrun;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static const char cmdname[] = "zdb";
2008-11-20 23:01:55 +03:00
uint8_t dump_opt[256];
typedef void object_viewer_t(objset_t *, uint64_t, void *data, size_t size);
uint64_t *zopt_object = NULL;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static unsigned zopt_objects = 0;
2008-11-20 23:01:55 +03:00
libzfs_handle_t *g_zfs;
uint64_t max_inflight = 1000;
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
static int leaked_objects = 0;
static range_tree_t *mos_refd_objs;
2008-11-20 23:01:55 +03:00
static void snprintf_blkptr_compact(char *, size_t, const blkptr_t *);
static void mos_obj_refd(uint64_t);
static void mos_obj_refd_multiple(uint64_t);
2008-11-20 23:01:55 +03:00
/*
* These libumem hooks provide a reasonable set of defaults for the allocator's
* debugging facilities.
*/
const char *
_umem_debug_init(void)
2008-11-20 23:01:55 +03:00
{
return ("default,verbose"); /* $UMEM_DEBUG setting */
}
const char *
_umem_logging_init(void)
{
return ("fail,contents"); /* $UMEM_LOGGING setting */
}
static void
usage(void)
{
(void) fprintf(stderr,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
"Usage:\t%s [-AbcdDFGhikLMPsvX] [-e [-V] [-p <path> ...]] "
"[-I <inflight I/Os>]\n"
"\t\t[-o <var>=<value>]... [-t <txg>] [-U <cache>] [-x <dumpdir>]\n"
"\t\t[<poolname> [<object> ...]]\n"
"\t%s [-AdiPv] [-e [-V] [-p <path> ...]] [-U <cache>] <dataset>\n"
"\t\t[<object> ...]\n"
"\t%s -C [-A] [-U <cache>]\n"
"\t%s -l [-Aqu] <device>\n"
"\t%s -m [-AFLPX] [-e [-V] [-p <path> ...]] [-t <txg>] "
"[-U <cache>]\n\t\t<poolname> [<vdev> [<metaslab> ...]]\n"
"\t%s -O <dataset> <path>\n"
"\t%s -R [-A] [-e [-V] [-p <path> ...]] [-U <cache>]\n"
"\t\t<poolname> <vdev>:<offset>:<size>[:<flags>]\n"
"\t%s -E [-A] word0:word1:...:word15\n"
"\t%s -S [-AP] [-e [-V] [-p <path> ...]] [-U <cache>] "
"<poolname>\n\n",
cmdname, cmdname, cmdname, cmdname, cmdname, cmdname, cmdname,
cmdname, cmdname);
(void) fprintf(stderr, " Dataset name must include at least one "
"separator character '/' or '@'\n");
(void) fprintf(stderr, " If dataset name is specified, only that "
"dataset is dumped\n");
(void) fprintf(stderr, " If object numbers are specified, only "
"those objects are dumped\n\n");
(void) fprintf(stderr, " Options to control amount of output:\n");
(void) fprintf(stderr, " -b block statistics\n");
(void) fprintf(stderr, " -c checksum all metadata (twice for "
2009-07-03 02:44:48 +04:00
"all data) blocks\n");
(void) fprintf(stderr, " -C config (or cachefile if alone)\n");
(void) fprintf(stderr, " -d dataset(s)\n");
(void) fprintf(stderr, " -D dedup statistics\n");
(void) fprintf(stderr, " -E decode and display block from an "
"embedded block pointer\n");
(void) fprintf(stderr, " -h pool history\n");
(void) fprintf(stderr, " -i intent logs\n");
(void) fprintf(stderr, " -l read label contents\n");
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
(void) fprintf(stderr, " -k examine the checkpointed state "
"of the pool\n");
2009-01-16 00:59:39 +03:00
(void) fprintf(stderr, " -L disable leak tracking (do not "
"load spacemaps)\n");
(void) fprintf(stderr, " -m metaslabs\n");
(void) fprintf(stderr, " -M metaslab groups\n");
(void) fprintf(stderr, " -O perform object lookups by path\n");
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, " -R read and display block from a "
"device\n");
(void) fprintf(stderr, " -s report stats on zdb's I/O\n");
(void) fprintf(stderr, " -S simulate dedup to measure effect\n");
(void) fprintf(stderr, " -v verbose (applies to all "
"others)\n\n");
(void) fprintf(stderr, " Below options are intended for use "
"with other options:\n");
(void) fprintf(stderr, " -A ignore assertions (-A), enable "
"panic recovery (-AA) or both (-AAA)\n");
(void) fprintf(stderr, " -e pool is exported/destroyed/"
"has altroot/not in a cachefile\n");
(void) fprintf(stderr, " -F attempt automatic rewind within "
"safe range of transaction groups\n");
(void) fprintf(stderr, " -G dump zfs_dbgmsg buffer before "
"exiting\n");
(void) fprintf(stderr, " -I <number of inflight I/Os> -- "
"specify the maximum number of\n "
"checksumming I/Os [default is 200]\n");
(void) fprintf(stderr, " -o <variable>=<value> set global "
"variable to an unsigned 32-bit integer\n");
(void) fprintf(stderr, " -p <path> -- use one or more with "
"-e to specify path to vdev dir\n");
(void) fprintf(stderr, " -P print numbers in parseable form\n");
(void) fprintf(stderr, " -q don't print label contents\n");
(void) fprintf(stderr, " -t <txg> -- highest txg to use when "
"searching for uberblocks\n");
(void) fprintf(stderr, " -u uberblock\n");
(void) fprintf(stderr, " -U <cachefile_path> -- use alternate "
"cachefile\n");
(void) fprintf(stderr, " -V do verbatim import\n");
(void) fprintf(stderr, " -x <dumpdir> -- "
"dump all read blocks into specified directory\n");
(void) fprintf(stderr, " -X attempt extreme rewind (does not "
"work with dataset)\n");
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, "Specify an option more than once (e.g. -bb) "
"to make only that option verbose\n");
(void) fprintf(stderr, "Default is to dump everything non-verbosely\n");
exit(1);
}
static void
dump_debug_buffer(void)
{
if (dump_opt['G']) {
(void) printf("\n");
(void) fflush(stdout);
zfs_dbgmsg_print("zdb");
}
}
2009-07-03 02:44:48 +04:00
/*
* Called for usage errors that are discovered after a call to spa_open(),
* dmu_bonus_hold(), or pool_match(). abort() is called for other errors.
*/
2008-11-20 23:01:55 +03:00
static void
fatal(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
(void) fprintf(stderr, "%s: ", cmdname);
(void) vfprintf(stderr, fmt, ap);
va_end(ap);
(void) fprintf(stderr, "\n");
dump_debug_buffer();
2009-07-03 02:44:48 +04:00
exit(1);
2008-11-20 23:01:55 +03:00
}
/* ARGSUSED */
static void
dump_packed_nvlist(objset_t *os, uint64_t object, void *data, size_t size)
{
nvlist_t *nv;
size_t nvsize = *(uint64_t *)data;
char *packed = umem_alloc(nvsize, UMEM_NOFAIL);
2009-07-03 02:44:48 +04:00
VERIFY(0 == dmu_read(os, object, 0, nvsize, packed, DMU_READ_PREFETCH));
2008-11-20 23:01:55 +03:00
VERIFY(nvlist_unpack(packed, nvsize, &nv, 0) == 0);
umem_free(packed, nvsize);
dump_nvlist(nv, 8);
nvlist_free(nv);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
/* ARGSUSED */
static void
dump_history_offsets(objset_t *os, uint64_t object, void *data, size_t size)
{
spa_history_phys_t *shp = data;
if (shp == NULL)
return;
(void) printf("\t\tpool_create_len = %llu\n",
(u_longlong_t)shp->sh_pool_create_len);
(void) printf("\t\tphys_max_off = %llu\n",
(u_longlong_t)shp->sh_phys_max_off);
(void) printf("\t\tbof = %llu\n",
(u_longlong_t)shp->sh_bof);
(void) printf("\t\teof = %llu\n",
(u_longlong_t)shp->sh_eof);
(void) printf("\t\trecords_lost = %llu\n",
(u_longlong_t)shp->sh_records_lost);
}
static void
zdb_nicenum(uint64_t num, char *buf, size_t buflen)
{
if (dump_opt['P'])
(void) snprintf(buf, buflen, "%llu", (longlong_t)num);
else
nicenum(num, buf, sizeof (buf));
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static const char histo_stars[] = "****************************************";
static const uint64_t histo_width = sizeof (histo_stars) - 1;
2008-11-20 23:01:55 +03:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(const uint64_t *histo, int size, int offset)
2008-11-20 23:01:55 +03:00
{
int i;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
int minidx = size - 1;
2008-11-20 23:01:55 +03:00
int maxidx = 0;
uint64_t max = 0;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
for (i = 0; i < size; i++) {
2008-11-20 23:01:55 +03:00
if (histo[i] > max)
max = histo[i];
if (histo[i] > 0 && i > maxidx)
maxidx = i;
if (histo[i] > 0 && i < minidx)
minidx = i;
}
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
if (max < histo_width)
max = histo_width;
2008-11-20 23:01:55 +03:00
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
for (i = minidx; i <= maxidx; i++) {
(void) printf("\t\t\t%3u: %6llu %s\n",
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
i + offset, (u_longlong_t)histo[i],
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
&histo_stars[(max - histo[i]) * histo_width / max]);
}
2008-11-20 23:01:55 +03:00
}
static void
dump_zap_stats(objset_t *os, uint64_t object)
{
int error;
zap_stats_t zs;
error = zap_get_stats(os, object, &zs);
if (error)
return;
if (zs.zs_ptrtbl_len == 0) {
ASSERT(zs.zs_num_blocks == 1);
(void) printf("\tmicrozap: %llu bytes, %llu entries\n",
(u_longlong_t)zs.zs_blocksize,
(u_longlong_t)zs.zs_num_entries);
return;
}
(void) printf("\tFat ZAP stats:\n");
(void) printf("\t\tPointer table:\n");
(void) printf("\t\t\t%llu elements\n",
(u_longlong_t)zs.zs_ptrtbl_len);
(void) printf("\t\t\tzt_blk: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_blk);
(void) printf("\t\t\tzt_numblks: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_numblks);
(void) printf("\t\t\tzt_shift: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_shift);
(void) printf("\t\t\tzt_blks_copied: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_blks_copied);
(void) printf("\t\t\tzt_nextblk: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_nextblk);
(void) printf("\t\tZAP entries: %llu\n",
(u_longlong_t)zs.zs_num_entries);
(void) printf("\t\tLeaf blocks: %llu\n",
(u_longlong_t)zs.zs_num_leafs);
(void) printf("\t\tTotal blocks: %llu\n",
(u_longlong_t)zs.zs_num_blocks);
(void) printf("\t\tzap_block_type: 0x%llx\n",
(u_longlong_t)zs.zs_block_type);
(void) printf("\t\tzap_magic: 0x%llx\n",
(u_longlong_t)zs.zs_magic);
(void) printf("\t\tzap_salt: 0x%llx\n",
(u_longlong_t)zs.zs_salt);
(void) printf("\t\tLeafs with 2^n pointers:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(zs.zs_leafs_with_2n_pointers, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tBlocks with n*5 entries:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(zs.zs_blocks_with_n5_entries, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tBlocks n/10 full:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(zs.zs_blocks_n_tenths_full, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tEntries with n chunks:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(zs.zs_entries_using_n_chunks, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tBuckets with n entries:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(zs.zs_buckets_with_n_entries, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 23:01:55 +03:00
}
/*ARGSUSED*/
static void
dump_none(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_unknown(objset_t *os, uint64_t object, void *data, size_t size)
{
(void) printf("\tUNKNOWN OBJECT TYPE\n");
}
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static void
2008-11-20 23:01:55 +03:00
dump_uint8(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_uint64(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_zap(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
void *prop;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned i;
2008-11-20 23:01:55 +03:00
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = ", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
prop = umem_zalloc(attr.za_num_integers *
attr.za_integer_length, UMEM_NOFAIL);
(void) zap_lookup(os, object, attr.za_name,
attr.za_integer_length, attr.za_num_integers, prop);
if (attr.za_integer_length == 1) {
(void) printf("%s", (char *)prop);
} else {
for (i = 0; i < attr.za_num_integers; i++) {
switch (attr.za_integer_length) {
case 2:
(void) printf("%u ",
((uint16_t *)prop)[i]);
break;
case 4:
(void) printf("%u ",
((uint32_t *)prop)[i]);
break;
case 8:
(void) printf("%lld ",
(u_longlong_t)((int64_t *)prop)[i]);
break;
}
}
}
(void) printf("\n");
umem_free(prop, attr.za_num_integers * attr.za_integer_length);
}
zap_cursor_fini(&zc);
}
static void
dump_bpobj(objset_t *os, uint64_t object, void *data, size_t size)
{
bpobj_phys_t *bpop = data;
uint64_t i;
char bytes[32], comp[32], uncomp[32];
/* make sure the output won't get truncated */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
if (bpop == NULL)
return;
zdb_nicenum(bpop->bpo_bytes, bytes, sizeof (bytes));
zdb_nicenum(bpop->bpo_comp, comp, sizeof (comp));
zdb_nicenum(bpop->bpo_uncomp, uncomp, sizeof (uncomp));
(void) printf("\t\tnum_blkptrs = %llu\n",
(u_longlong_t)bpop->bpo_num_blkptrs);
(void) printf("\t\tbytes = %s\n", bytes);
if (size >= BPOBJ_SIZE_V1) {
(void) printf("\t\tcomp = %s\n", comp);
(void) printf("\t\tuncomp = %s\n", uncomp);
}
if (size >= sizeof (*bpop)) {
(void) printf("\t\tsubobjs = %llu\n",
(u_longlong_t)bpop->bpo_subobjs);
(void) printf("\t\tnum_subobjs = %llu\n",
(u_longlong_t)bpop->bpo_num_subobjs);
}
if (dump_opt['d'] < 5)
return;
for (i = 0; i < bpop->bpo_num_blkptrs; i++) {
char blkbuf[BP_SPRINTF_LEN];
blkptr_t bp;
int err = dmu_read(os, object,
i * sizeof (bp), sizeof (bp), &bp, 0);
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
break;
}
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), &bp);
(void) printf("\t%s\n", blkbuf);
}
}
/* ARGSUSED */
static void
dump_bpobj_subobjs(objset_t *os, uint64_t object, void *data, size_t size)
{
dmu_object_info_t doi;
int64_t i;
VERIFY0(dmu_object_info(os, object, &doi));
uint64_t *subobjs = kmem_alloc(doi.doi_max_offset, KM_SLEEP);
int err = dmu_read(os, object, 0, doi.doi_max_offset, subobjs, 0);
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
kmem_free(subobjs, doi.doi_max_offset);
return;
}
int64_t last_nonzero = -1;
for (i = 0; i < doi.doi_max_offset / 8; i++) {
if (subobjs[i] != 0)
last_nonzero = i;
}
for (i = 0; i <= last_nonzero; i++) {
(void) printf("\t%llu\n", (u_longlong_t)subobjs[i]);
}
kmem_free(subobjs, doi.doi_max_offset);
}
/*ARGSUSED*/
static void
dump_ddt_zap(objset_t *os, uint64_t object, void *data, size_t size)
{
dump_zap_stats(os, object);
/* contents are printed elsewhere, properly decoded */
}
/*ARGSUSED*/
static void
dump_sa_attrs(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = ", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
(void) printf(" %llx : [%d:%d:%d]\n",
(u_longlong_t)attr.za_first_integer,
(int)ATTR_LENGTH(attr.za_first_integer),
(int)ATTR_BSWAP(attr.za_first_integer),
(int)ATTR_NUM(attr.za_first_integer));
}
zap_cursor_fini(&zc);
}
/*ARGSUSED*/
static void
dump_sa_layouts(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
uint16_t *layout_attrs;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned i;
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = [", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
VERIFY(attr.za_integer_length == 2);
layout_attrs = umem_zalloc(attr.za_num_integers *
attr.za_integer_length, UMEM_NOFAIL);
VERIFY(zap_lookup(os, object, attr.za_name,
attr.za_integer_length,
attr.za_num_integers, layout_attrs) == 0);
for (i = 0; i != attr.za_num_integers; i++)
(void) printf(" %d ", (int)layout_attrs[i]);
(void) printf("]\n");
umem_free(layout_attrs,
attr.za_num_integers * attr.za_integer_length);
}
zap_cursor_fini(&zc);
}
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
static void
dump_zpldir(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
const char *typenames[] = {
/* 0 */ "not specified",
/* 1 */ "FIFO",
/* 2 */ "Character Device",
/* 3 */ "3 (invalid)",
/* 4 */ "Directory",
/* 5 */ "5 (invalid)",
/* 6 */ "Block Device",
/* 7 */ "7 (invalid)",
/* 8 */ "Regular File",
/* 9 */ "9 (invalid)",
/* 10 */ "Symbolic Link",
/* 11 */ "11 (invalid)",
/* 12 */ "Socket",
/* 13 */ "Door",
/* 14 */ "Event Port",
/* 15 */ "15 (invalid)",
};
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = %lld (type: %s)\n",
attr.za_name, ZFS_DIRENT_OBJ(attr.za_first_integer),
typenames[ZFS_DIRENT_TYPE(attr.za_first_integer)]);
}
zap_cursor_fini(&zc);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static int
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
get_dtl_refcount(vdev_t *vd)
{
int refcount = 0;
if (vd->vdev_ops->vdev_op_leaf) {
space_map_t *sm = vd->vdev_dtl_sm;
if (sm != NULL &&
sm->sm_dbuf->db_size == sizeof (space_map_phys_t))
return (1);
return (0);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned c = 0; c < vd->vdev_children; c++)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
refcount += get_dtl_refcount(vd->vdev_child[c]);
return (refcount);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static int
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
get_metaslab_refcount(vdev_t *vd)
{
int refcount = 0;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (vd->vdev_top == vd) {
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
space_map_t *sm = vd->vdev_ms[m]->ms_sm;
if (sm != NULL &&
sm->sm_dbuf->db_size == sizeof (space_map_phys_t))
refcount++;
}
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned c = 0; c < vd->vdev_children; c++)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
refcount += get_metaslab_refcount(vd->vdev_child[c]);
return (refcount);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static int
get_obsolete_refcount(vdev_t *vd)
{
uint64_t obsolete_sm_object;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
int refcount = 0;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
if (vd->vdev_top == vd && obsolete_sm_object != 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dmu_object_info_t doi;
VERIFY0(dmu_object_info(vd->vdev_spa->spa_meta_objset,
obsolete_sm_object, &doi));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (doi.doi_bonus_size == sizeof (space_map_phys_t)) {
refcount++;
}
} else {
ASSERT3P(vd->vdev_obsolete_sm, ==, NULL);
ASSERT3U(obsolete_sm_object, ==, 0);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
for (unsigned c = 0; c < vd->vdev_children; c++) {
refcount += get_obsolete_refcount(vd->vdev_child[c]);
}
return (refcount);
}
static int
get_prev_obsolete_spacemap_refcount(spa_t *spa)
{
uint64_t prev_obj =
spa->spa_condensing_indirect_phys.scip_prev_obsolete_sm_object;
if (prev_obj != 0) {
dmu_object_info_t doi;
VERIFY0(dmu_object_info(spa->spa_meta_objset, prev_obj, &doi));
if (doi.doi_bonus_size == sizeof (space_map_phys_t)) {
return (1);
}
}
return (0);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
static int
get_checkpoint_refcount(vdev_t *vd)
{
int refcount = 0;
if (vd->vdev_top == vd && vd->vdev_top_zap != 0 &&
zap_contains(spa_meta_objset(vd->vdev_spa),
vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) == 0)
refcount++;
for (uint64_t c = 0; c < vd->vdev_children; c++)
refcount += get_checkpoint_refcount(vd->vdev_child[c]);
return (refcount);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
static int
verify_spacemap_refcounts(spa_t *spa)
{
uint64_t expected_refcount = 0;
uint64_t actual_refcount;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_SPACEMAP_HISTOGRAM],
&expected_refcount);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
actual_refcount = get_dtl_refcount(spa->spa_root_vdev);
actual_refcount += get_metaslab_refcount(spa->spa_root_vdev);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
actual_refcount += get_obsolete_refcount(spa->spa_root_vdev);
actual_refcount += get_prev_obsolete_spacemap_refcount(spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
actual_refcount += get_checkpoint_refcount(spa->spa_root_vdev);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
if (expected_refcount != actual_refcount) {
(void) printf("space map refcount mismatch: expected %lld != "
"actual %lld\n",
(longlong_t)expected_refcount,
(longlong_t)actual_refcount);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
return (2);
}
return (0);
}
2008-11-20 23:01:55 +03:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_spacemap(objset_t *os, space_map_t *sm)
2008-11-20 23:01:55 +03:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *ddata[] = { "ALLOC", "FREE", "CONDENSE", "INVALID",
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
"INVALID", "INVALID", "INVALID", "INVALID" };
2008-11-20 23:01:55 +03:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
if (sm == NULL)
2008-11-20 23:01:55 +03:00
return;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
(void) printf("space map object %llu:\n",
(longlong_t)sm->sm_phys->smp_object);
(void) printf(" smp_objsize = 0x%llx\n",
(longlong_t)sm->sm_phys->smp_objsize);
(void) printf(" smp_alloc = 0x%llx\n",
(longlong_t)sm->sm_phys->smp_alloc);
2008-11-20 23:01:55 +03:00
/*
* Print out the freelist entries in both encoded and decoded form.
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
uint8_t mapshift = sm->sm_shift;
int64_t alloc = 0;
uint64_t word;
for (uint64_t offset = 0; offset < space_map_length(sm);
offset += sizeof (word)) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
VERIFY0(dmu_read(os, space_map_object(sm), offset,
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
sizeof (word), &word, DMU_READ_PREFETCH));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
if (sm_entry_is_debug(word)) {
(void) printf("\t [%6llu] %s: txg %llu, pass %llu\n",
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
(u_longlong_t)(offset / sizeof (word)),
ddata[SM_DEBUG_ACTION_DECODE(word)],
(u_longlong_t)SM_DEBUG_TXG_DECODE(word),
(u_longlong_t)SM_DEBUG_SYNCPASS_DECODE(word));
continue;
}
uint8_t words;
char entry_type;
uint64_t entry_off, entry_run, entry_vdev = SM_NO_VDEVID;
if (sm_entry_is_single_word(word)) {
entry_type = (SM_TYPE_DECODE(word) == SM_ALLOC) ?
'A' : 'F';
entry_off = (SM_OFFSET_DECODE(word) << mapshift) +
sm->sm_start;
entry_run = SM_RUN_DECODE(word) << mapshift;
words = 1;
2008-11-20 23:01:55 +03:00
} else {
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
/* it is a two-word entry so we read another word */
ASSERT(sm_entry_is_double_word(word));
uint64_t extra_word;
offset += sizeof (extra_word);
VERIFY0(dmu_read(os, space_map_object(sm), offset,
sizeof (extra_word), &extra_word,
DMU_READ_PREFETCH));
ASSERT3U(offset, <=, space_map_length(sm));
entry_run = SM2_RUN_DECODE(word) << mapshift;
entry_vdev = SM2_VDEV_DECODE(word);
entry_type = (SM2_TYPE_DECODE(extra_word) == SM_ALLOC) ?
'A' : 'F';
entry_off = (SM2_OFFSET_DECODE(extra_word) <<
mapshift) + sm->sm_start;
words = 2;
2008-11-20 23:01:55 +03:00
}
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
(void) printf("\t [%6llu] %c range:"
" %010llx-%010llx size: %06llx vdev: %06llu words: %u\n",
(u_longlong_t)(offset / sizeof (word)),
entry_type, (u_longlong_t)entry_off,
(u_longlong_t)(entry_off + entry_run),
(u_longlong_t)entry_run,
(u_longlong_t)entry_vdev, words);
if (entry_type == 'A')
alloc += entry_run;
else
alloc -= entry_run;
2008-11-20 23:01:55 +03:00
}
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
if ((uint64_t)alloc != space_map_allocated(sm)) {
(void) printf("space_map_object alloc (%lld) INCONSISTENT "
"with space map summary (%lld)\n",
(longlong_t)space_map_allocated(sm), (longlong_t)alloc);
2008-11-20 23:01:55 +03:00
}
}
2009-07-03 02:44:48 +04:00
static void
dump_metaslab_stats(metaslab_t *msp)
{
char maxbuf[32];
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
range_tree_t *rt = msp->ms_allocatable;
avl_tree_t *t = &msp->ms_allocatable_by_size;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
int free_pct = range_tree_space(rt) * 100 / msp->ms_size;
2009-07-03 02:44:48 +04:00
/* max sure nicenum has enough space */
CTASSERT(sizeof (maxbuf) >= NN_NUMBUF_SZ);
zdb_nicenum(metaslab_block_maxsize(msp), maxbuf, sizeof (maxbuf));
2009-07-03 02:44:48 +04:00
(void) printf("\t %25s %10lu %7s %6s %4s %4d%%\n",
2009-07-03 02:44:48 +04:00
"segments", avl_numnodes(t), "maxsize", maxbuf,
"freepct", free_pct);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
(void) printf("\tIn-memory histogram:\n");
dump_histogram(rt->rt_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
2009-07-03 02:44:48 +04:00
}
2008-11-20 23:01:55 +03:00
static void
dump_metaslab(metaslab_t *msp)
{
vdev_t *vd = msp->ms_group->mg_vd;
spa_t *spa = vd->vdev_spa;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
space_map_t *sm = msp->ms_sm;
char freebuf[32];
2008-11-20 23:01:55 +03:00
zdb_nicenum(msp->ms_size - space_map_allocated(sm), freebuf,
sizeof (freebuf));
2008-11-20 23:01:55 +03:00
(void) printf(
"\tmetaslab %6llu offset %12llx spacemap %6llu free %5s\n",
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
(u_longlong_t)msp->ms_id, (u_longlong_t)msp->ms_start,
(u_longlong_t)space_map_object(sm), freebuf);
2008-11-20 23:01:55 +03:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
if (dump_opt['m'] > 2 && !dump_opt['L']) {
2009-07-03 02:44:48 +04:00
mutex_enter(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
metaslab_load_wait(msp);
if (!msp->ms_loaded) {
VERIFY0(metaslab_load(msp));
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
range_tree_stat_verify(msp->ms_allocatable);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
}
2009-07-03 02:44:48 +04:00
dump_metaslab_stats(msp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
metaslab_unload(msp);
2009-07-03 02:44:48 +04:00
mutex_exit(&msp->ms_lock);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
if (dump_opt['m'] > 1 && sm != NULL &&
spa_feature_is_active(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM)) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
/*
* The space map histogram represents free space in chunks
* of sm_shift (i.e. bucket 0 refers to 2^sm_shift).
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
(void) printf("\tOn-disk histogram:\t\tfragmentation %llu\n",
(u_longlong_t)msp->ms_fragmentation);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_histogram(sm->sm_phys->smp_histogram,
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
SPACE_MAP_HISTOGRAM_SIZE, sm->sm_shift);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
}
if (dump_opt['d'] > 5 || dump_opt['m'] > 3) {
ASSERT(msp->ms_size == (1ULL << vd->vdev_ms_shift));
2009-07-03 02:44:48 +04:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_spacemap(spa->spa_meta_objset, msp->ms_sm);
2009-07-03 02:44:48 +04:00
}
}
2008-11-20 23:01:55 +03:00
static void
print_vdev_metaslab_header(vdev_t *vd)
{
vdev_alloc_bias_t alloc_bias = vd->vdev_alloc_bias;
const char *bias_str;
bias_str = (alloc_bias == VDEV_BIAS_LOG || vd->vdev_islog) ?
VDEV_ALLOC_BIAS_LOG :
(alloc_bias == VDEV_BIAS_SPECIAL) ? VDEV_ALLOC_BIAS_SPECIAL :
(alloc_bias == VDEV_BIAS_DEDUP) ? VDEV_ALLOC_BIAS_DEDUP :
vd->vdev_islog ? "log" : "";
(void) printf("\tvdev %10llu %s\n"
"\t%-10s%5llu %-19s %-15s %-12s\n",
(u_longlong_t)vd->vdev_id, bias_str,
"metaslabs", (u_longlong_t)vd->vdev_ms_count,
"offset", "spacemap", "free");
(void) printf("\t%15s %19s %15s %12s\n",
"---------------", "-------------------",
"---------------", "------------");
2008-11-20 23:01:55 +03:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
static void
dump_metaslab_groups(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
metaslab_class_t *mc = spa_normal_class(spa);
uint64_t fragmentation;
metaslab_class_histogram_verify(mc);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned c = 0; c < rvd->vdev_children; c++) {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (mg == NULL || mg->mg_class != mc)
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
continue;
metaslab_group_histogram_verify(mg);
mg->mg_fragmentation = metaslab_group_fragmentation(mg);
(void) printf("\tvdev %10llu\t\tmetaslabs%5llu\t\t"
"fragmentation",
(u_longlong_t)tvd->vdev_id,
(u_longlong_t)tvd->vdev_ms_count);
if (mg->mg_fragmentation == ZFS_FRAG_INVALID) {
(void) printf("%3s\n", "-");
} else {
(void) printf("%3llu%%\n",
(u_longlong_t)mg->mg_fragmentation);
}
dump_histogram(mg->mg_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
}
(void) printf("\tpool %s\tfragmentation", spa_name(spa));
fragmentation = metaslab_class_fragmentation(mc);
if (fragmentation == ZFS_FRAG_INVALID)
(void) printf("\t%3s\n", "-");
else
(void) printf("\t%3llu%%\n", (u_longlong_t)fragmentation);
dump_histogram(mc->mc_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static void
print_vdev_indirect(vdev_t *vd)
{
vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
vdev_indirect_births_t *vib = vd->vdev_indirect_births;
if (vim == NULL) {
ASSERT3P(vib, ==, NULL);
return;
}
ASSERT3U(vdev_indirect_mapping_object(vim), ==,
vic->vic_mapping_object);
ASSERT3U(vdev_indirect_births_object(vib), ==,
vic->vic_births_object);
(void) printf("indirect births obj %llu:\n",
(longlong_t)vic->vic_births_object);
(void) printf(" vib_count = %llu\n",
(longlong_t)vdev_indirect_births_count(vib));
for (uint64_t i = 0; i < vdev_indirect_births_count(vib); i++) {
vdev_indirect_birth_entry_phys_t *cur_vibe =
&vib->vib_entries[i];
(void) printf("\toffset %llx -> txg %llu\n",
(longlong_t)cur_vibe->vibe_offset,
(longlong_t)cur_vibe->vibe_phys_birth_txg);
}
(void) printf("\n");
(void) printf("indirect mapping obj %llu:\n",
(longlong_t)vic->vic_mapping_object);
(void) printf(" vim_max_offset = 0x%llx\n",
(longlong_t)vdev_indirect_mapping_max_offset(vim));
(void) printf(" vim_bytes_mapped = 0x%llx\n",
(longlong_t)vdev_indirect_mapping_bytes_mapped(vim));
(void) printf(" vim_count = %llu\n",
(longlong_t)vdev_indirect_mapping_num_entries(vim));
if (dump_opt['d'] <= 5 && dump_opt['m'] <= 3)
return;
uint32_t *counts = vdev_indirect_mapping_load_obsolete_counts(vim);
for (uint64_t i = 0; i < vdev_indirect_mapping_num_entries(vim); i++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[i];
(void) printf("\t<%llx:%llx:%llx> -> "
"<%llx:%llx:%llx> (%x obsolete)\n",
(longlong_t)vd->vdev_id,
(longlong_t)DVA_MAPPING_GET_SRC_OFFSET(vimep),
(longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
(longlong_t)DVA_GET_VDEV(&vimep->vimep_dst),
(longlong_t)DVA_GET_OFFSET(&vimep->vimep_dst),
(longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
counts[i]);
}
(void) printf("\n");
uint64_t obsolete_sm_object;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (obsolete_sm_object != 0) {
objset_t *mos = vd->vdev_spa->spa_meta_objset;
(void) printf("obsolete space map object %llu:\n",
(u_longlong_t)obsolete_sm_object);
ASSERT(vd->vdev_obsolete_sm != NULL);
ASSERT3U(space_map_object(vd->vdev_obsolete_sm), ==,
obsolete_sm_object);
dump_spacemap(mos, vd->vdev_obsolete_sm);
(void) printf("\n");
}
}
2008-11-20 23:01:55 +03:00
static void
dump_metaslabs(spa_t *spa)
{
vdev_t *vd, *rvd = spa->spa_root_vdev;
uint64_t m, c = 0, children = rvd->vdev_children;
2008-11-20 23:01:55 +03:00
(void) printf("\nMetaslabs:\n");
if (!dump_opt['d'] && zopt_objects > 0) {
c = zopt_object[0];
if (c >= children)
(void) fatal("bad vdev id: %llu", (u_longlong_t)c);
2008-11-20 23:01:55 +03:00
if (zopt_objects > 1) {
vd = rvd->vdev_child[c];
print_vdev_metaslab_header(vd);
for (m = 1; m < zopt_objects; m++) {
if (zopt_object[m] < vd->vdev_ms_count)
dump_metaslab(
vd->vdev_ms[zopt_object[m]]);
else
(void) fprintf(stderr, "bad metaslab "
"number %llu\n",
(u_longlong_t)zopt_object[m]);
}
(void) printf("\n");
return;
}
children = c + 1;
}
for (; c < children; c++) {
vd = rvd->vdev_child[c];
print_vdev_metaslab_header(vd);
2008-11-20 23:01:55 +03:00
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
print_vdev_indirect(vd);
2008-11-20 23:01:55 +03:00
for (m = 0; m < vd->vdev_ms_count; m++)
dump_metaslab(vd->vdev_ms[m]);
(void) printf("\n");
}
}
static void
dump_dde(const ddt_t *ddt, const ddt_entry_t *dde, uint64_t index)
{
const ddt_phys_t *ddp = dde->dde_phys;
const ddt_key_t *ddk = &dde->dde_key;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *types[4] = { "ditto", "single", "double", "triple" };
char blkbuf[BP_SPRINTF_LEN];
blkptr_t blk;
int p;
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (ddp->ddp_phys_birth == 0)
continue;
ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk);
snprintf_blkptr(blkbuf, sizeof (blkbuf), &blk);
(void) printf("index %llx refcnt %llu %s %s\n",
(u_longlong_t)index, (u_longlong_t)ddp->ddp_refcnt,
types[p], blkbuf);
}
}
static void
dump_dedup_ratio(const ddt_stat_t *dds)
{
double rL, rP, rD, D, dedup, compress, copies;
if (dds->dds_blocks == 0)
return;
rL = (double)dds->dds_ref_lsize;
rP = (double)dds->dds_ref_psize;
rD = (double)dds->dds_ref_dsize;
D = (double)dds->dds_dsize;
dedup = rD / D;
compress = rL / rP;
copies = rD / rP;
(void) printf("dedup = %.2f, compress = %.2f, copies = %.2f, "
"dedup * compress / copies = %.2f\n\n",
dedup, compress, copies, dedup * compress / copies);
}
static void
dump_ddt(ddt_t *ddt, enum ddt_type type, enum ddt_class class)
{
char name[DDT_NAMELEN];
ddt_entry_t dde;
uint64_t walk = 0;
dmu_object_info_t doi;
uint64_t count, dspace, mspace;
int error;
error = ddt_object_info(ddt, type, class, &doi);
if (error == ENOENT)
return;
ASSERT(error == 0);
error = ddt_object_count(ddt, type, class, &count);
ASSERT(error == 0);
if (count == 0)
return;
dspace = doi.doi_physical_blocks_512 << 9;
mspace = doi.doi_fill_count * doi.doi_data_block_size;
ddt_object_name(ddt, type, class, name);
(void) printf("%s: %llu entries, size %llu on disk, %llu in core\n",
name,
(u_longlong_t)count,
(u_longlong_t)(dspace / count),
(u_longlong_t)(mspace / count));
if (dump_opt['D'] < 3)
return;
zpool_dump_ddt(NULL, &ddt->ddt_histogram[type][class]);
if (dump_opt['D'] < 4)
return;
if (dump_opt['D'] < 5 && class == DDT_CLASS_UNIQUE)
return;
(void) printf("%s contents:\n\n", name);
while ((error = ddt_object_walk(ddt, type, class, &walk, &dde)) == 0)
dump_dde(ddt, &dde, walk);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
ASSERT3U(error, ==, ENOENT);
(void) printf("\n");
}
static void
dump_all_ddts(spa_t *spa)
{
ddt_histogram_t ddh_total;
ddt_stat_t dds_total;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
bzero(&ddh_total, sizeof (ddh_total));
bzero(&dds_total, sizeof (dds_total));
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
ddt_t *ddt = spa->spa_ddt[c];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (enum ddt_type type = 0; type < DDT_TYPES; type++) {
for (enum ddt_class class = 0; class < DDT_CLASSES;
class++) {
dump_ddt(ddt, type, class);
}
}
}
ddt_get_dedup_stats(spa, &dds_total);
if (dds_total.dds_blocks == 0) {
(void) printf("All DDTs are empty\n");
return;
}
(void) printf("\n");
if (dump_opt['D'] > 1) {
(void) printf("DDT histogram (aggregated over all DDTs):\n");
ddt_get_dedup_histogram(spa, &ddh_total);
zpool_dump_ddt(&dds_total, &ddh_total);
}
dump_dedup_ratio(&dds_total);
}
2009-01-16 00:59:39 +03:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
dump_dtl_seg(void *arg, uint64_t start, uint64_t size)
2009-01-16 00:59:39 +03:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
char *prefix = arg;
2009-01-16 00:59:39 +03:00
(void) printf("%s [%llu,%llu) length %llu\n",
prefix,
(u_longlong_t)start,
(u_longlong_t)(start + size),
(u_longlong_t)(size));
}
2008-11-20 23:01:55 +03:00
static void
dump_dtl(vdev_t *vd, int indent)
{
2009-01-16 00:59:39 +03:00
spa_t *spa = vd->vdev_spa;
boolean_t required;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *name[DTL_TYPES] = { "missing", "partial", "scrub",
"outage" };
2009-01-16 00:59:39 +03:00
char prefix[256];
spa_vdev_state_enter(spa, SCL_NONE);
2009-01-16 00:59:39 +03:00
required = vdev_dtl_required(vd);
(void) spa_vdev_state_exit(spa, NULL, 0);
2008-11-20 23:01:55 +03:00
if (indent == 0)
(void) printf("\nDirty time logs:\n\n");
2009-01-16 00:59:39 +03:00
(void) printf("\t%*s%s [%s]\n", indent, "",
vd->vdev_path ? vd->vdev_path :
2009-01-16 00:59:39 +03:00
vd->vdev_parent ? vd->vdev_ops->vdev_op_type : spa_name(spa),
required ? "DTL-required" : "DTL-expendable");
2008-11-20 23:01:55 +03:00
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (int t = 0; t < DTL_TYPES; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
range_tree_t *rt = vd->vdev_dtl[t];
if (range_tree_space(rt) == 0)
2009-01-16 00:59:39 +03:00
continue;
(void) snprintf(prefix, sizeof (prefix), "\t%*s%s",
indent + 2, "", name[t]);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
range_tree_walk(rt, dump_dtl_seg, prefix);
2009-01-16 00:59:39 +03:00
if (dump_opt['d'] > 5 && vd->vdev_children == 0)
dump_spacemap(spa->spa_meta_objset,
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
vd->vdev_dtl_sm);
2008-11-20 23:01:55 +03:00
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned c = 0; c < vd->vdev_children; c++)
2008-11-20 23:01:55 +03:00
dump_dtl(vd->vdev_child[c], indent + 4);
}
static void
dump_history(spa_t *spa)
{
nvlist_t **events = NULL;
char *buf;
uint64_t resid, len, off = 0;
uint_t num = 0;
int error;
time_t tsec;
struct tm t;
char tbuf[30];
char internalstr[MAXPATHLEN];
if ((buf = malloc(SPA_OLD_MAXBLOCKSIZE)) == NULL) {
(void) fprintf(stderr, "%s: unable to allocate I/O buffer\n",
__func__);
return;
}
do {
len = SPA_OLD_MAXBLOCKSIZE;
if ((error = spa_history_get(spa, &off, &len, buf)) != 0) {
(void) fprintf(stderr, "Unable to read history: "
"error %d\n", error);
free(buf);
return;
}
if (zpool_history_unpack(buf, len, &resid, &events, &num) != 0)
break;
off -= resid;
} while (len != 0);
(void) printf("\nHistory:\n");
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned i = 0; i < num; i++) {
uint64_t time, txg, ievent;
char *cmd, *intstr;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
boolean_t printed = B_FALSE;
if (nvlist_lookup_uint64(events[i], ZPOOL_HIST_TIME,
&time) != 0)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
goto next;
if (nvlist_lookup_string(events[i], ZPOOL_HIST_CMD,
&cmd) != 0) {
if (nvlist_lookup_uint64(events[i],
ZPOOL_HIST_INT_EVENT, &ievent) != 0)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
goto next;
verify(nvlist_lookup_uint64(events[i],
ZPOOL_HIST_TXG, &txg) == 0);
verify(nvlist_lookup_string(events[i],
ZPOOL_HIST_INT_STR, &intstr) == 0);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (ievent >= ZFS_NUM_LEGACY_HISTORY_EVENTS)
goto next;
(void) snprintf(internalstr,
sizeof (internalstr),
"[internal %s txg:%lld] %s",
zfs_history_event_names[ievent],
(longlong_t)txg, intstr);
cmd = internalstr;
}
tsec = time;
(void) localtime_r(&tsec, &t);
(void) strftime(tbuf, sizeof (tbuf), "%F.%T", &t);
(void) printf("%s %s\n", tbuf, cmd);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
printed = B_TRUE;
next:
if (dump_opt['h'] > 1) {
if (!printed)
(void) printf("unrecognized record:\n");
dump_nvlist(events[i], 2);
}
}
free(buf);
}
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
static void
dump_dnode(objset_t *os, uint64_t object, void *data, size_t size)
{
}
static uint64_t
blkid2offset(const dnode_phys_t *dnp, const blkptr_t *bp,
const zbookmark_phys_t *zb)
2008-11-20 23:01:55 +03:00
{
if (dnp == NULL) {
ASSERT(zb->zb_level < 0);
if (zb->zb_object == 0)
return (zb->zb_blkid);
return (zb->zb_blkid * BP_GET_LSIZE(bp));
}
ASSERT(zb->zb_level >= 0);
2008-11-20 23:01:55 +03:00
return ((zb->zb_blkid <<
(zb->zb_level * (dnp->dn_indblkshift - SPA_BLKPTRSHIFT))) *
2008-11-20 23:01:55 +03:00
dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT);
}
static void
snprintf_blkptr_compact(char *blkbuf, size_t buflen, const blkptr_t *bp)
2008-11-20 23:01:55 +03:00
{
const dva_t *dva = bp->blk_dva;
int ndvas = dump_opt['d'] > 5 ? BP_GET_NDVAS(bp) : 1;
int i;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
if (dump_opt['b'] >= 6) {
snprintf_blkptr(blkbuf, buflen, bp);
return;
}
2008-11-20 23:01:55 +03:00
if (BP_IS_EMBEDDED(bp)) {
(void) sprintf(blkbuf,
"EMBEDDED et=%u %llxL/%llxP B=%llu",
(int)BPE_GET_ETYPE(bp),
(u_longlong_t)BPE_GET_LSIZE(bp),
(u_longlong_t)BPE_GET_PSIZE(bp),
(u_longlong_t)bp->blk_birth);
return;
}
2008-11-20 23:01:55 +03:00
blkbuf[0] = '\0';
for (i = 0; i < ndvas; i++)
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf), "%llu:%llx:%llx ",
2008-11-20 23:01:55 +03:00
(u_longlong_t)DVA_GET_VDEV(&dva[i]),
(u_longlong_t)DVA_GET_OFFSET(&dva[i]),
(u_longlong_t)DVA_GET_ASIZE(&dva[i]));
if (BP_IS_HOLE(bp)) {
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
"%llxL B=%llu",
(u_longlong_t)BP_GET_LSIZE(bp),
(u_longlong_t)bp->blk_birth);
} else {
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
"%llxL/%llxP F=%llu B=%llu/%llu",
(u_longlong_t)BP_GET_LSIZE(bp),
(u_longlong_t)BP_GET_PSIZE(bp),
(u_longlong_t)BP_GET_FILL(bp),
(u_longlong_t)bp->blk_birth,
(u_longlong_t)BP_PHYSICAL_BIRTH(bp));
}
2008-11-20 23:01:55 +03:00
}
static void
print_indirect(blkptr_t *bp, const zbookmark_phys_t *zb,
const dnode_phys_t *dnp)
2008-11-20 23:01:55 +03:00
{
char blkbuf[BP_SPRINTF_LEN];
2008-11-20 23:01:55 +03:00
int l;
if (!BP_IS_EMBEDDED(bp)) {
ASSERT3U(BP_GET_TYPE(bp), ==, dnp->dn_type);
ASSERT3U(BP_GET_LEVEL(bp), ==, zb->zb_level);
}
2008-11-20 23:01:55 +03:00
(void) printf("%16llx ", (u_longlong_t)blkid2offset(dnp, bp, zb));
2008-11-20 23:01:55 +03:00
ASSERT(zb->zb_level >= 0);
for (l = dnp->dn_nlevels - 1; l >= -1; l--) {
if (l == zb->zb_level) {
(void) printf("L%llx", (u_longlong_t)zb->zb_level);
2008-11-20 23:01:55 +03:00
} else {
(void) printf(" ");
2008-11-20 23:01:55 +03:00
}
}
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), bp);
(void) printf("%s\n", blkbuf);
}
static int
visit_indirect(spa_t *spa, const dnode_phys_t *dnp,
blkptr_t *bp, const zbookmark_phys_t *zb)
{
int err = 0;
if (bp->blk_birth == 0)
return (0);
print_indirect(bp, zb, dnp);
if (BP_GET_LEVEL(bp) > 0 && !BP_IS_HOLE(bp)) {
arc_flags_t flags = ARC_FLAG_WAIT;
int i;
blkptr_t *cbp;
int epb = BP_GET_LSIZE(bp) >> SPA_BLKPTRSHIFT;
arc_buf_t *buf;
uint64_t fill = 0;
err = arc_read(NULL, spa, bp, arc_getbuf_func, &buf,
ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL, &flags, zb);
if (err)
return (err);
ASSERT(buf->b_data);
/* recursively visit blocks below this */
cbp = buf->b_data;
for (i = 0; i < epb; i++, cbp++) {
zbookmark_phys_t czb;
SET_BOOKMARK(&czb, zb->zb_objset, zb->zb_object,
zb->zb_level - 1,
zb->zb_blkid * epb + i);
err = visit_indirect(spa, dnp, cbp, &czb);
if (err)
break;
fill += BP_GET_FILL(cbp);
}
2009-01-16 00:59:39 +03:00
if (!err)
ASSERT3U(fill, ==, BP_GET_FILL(bp));
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(buf, &buf);
2008-11-20 23:01:55 +03:00
}
return (err);
2008-11-20 23:01:55 +03:00
}
/*ARGSUSED*/
static void
dump_indirect(dnode_t *dn)
2008-11-20 23:01:55 +03:00
{
dnode_phys_t *dnp = dn->dn_phys;
int j;
zbookmark_phys_t czb;
2008-11-20 23:01:55 +03:00
(void) printf("Indirect blocks:\n");
SET_BOOKMARK(&czb, dmu_objset_id(dn->dn_objset),
dn->dn_object, dnp->dn_nlevels - 1, 0);
for (j = 0; j < dnp->dn_nblkptr; j++) {
czb.zb_blkid = j;
(void) visit_indirect(dmu_objset_spa(dn->dn_objset), dnp,
&dnp->dn_blkptr[j], &czb);
}
2008-11-20 23:01:55 +03:00
(void) printf("\n");
}
/*ARGSUSED*/
static void
dump_dsl_dir(objset_t *os, uint64_t object, void *data, size_t size)
{
dsl_dir_phys_t *dd = data;
time_t crtime;
char nice[32];
2008-11-20 23:01:55 +03:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (nice) >= NN_NUMBUF_SZ);
2008-11-20 23:01:55 +03:00
if (dd == NULL)
return;
ASSERT3U(size, >=, sizeof (dsl_dir_phys_t));
crtime = dd->dd_creation_time;
(void) printf("\t\tcreation_time = %s", ctime(&crtime));
(void) printf("\t\thead_dataset_obj = %llu\n",
(u_longlong_t)dd->dd_head_dataset_obj);
(void) printf("\t\tparent_dir_obj = %llu\n",
(u_longlong_t)dd->dd_parent_obj);
(void) printf("\t\torigin_obj = %llu\n",
(u_longlong_t)dd->dd_origin_obj);
(void) printf("\t\tchild_dir_zapobj = %llu\n",
(u_longlong_t)dd->dd_child_dir_zapobj);
zdb_nicenum(dd->dd_used_bytes, nice, sizeof (nice));
(void) printf("\t\tused_bytes = %s\n", nice);
zdb_nicenum(dd->dd_compressed_bytes, nice, sizeof (nice));
(void) printf("\t\tcompressed_bytes = %s\n", nice);
zdb_nicenum(dd->dd_uncompressed_bytes, nice, sizeof (nice));
(void) printf("\t\tuncompressed_bytes = %s\n", nice);
zdb_nicenum(dd->dd_quota, nice, sizeof (nice));
(void) printf("\t\tquota = %s\n", nice);
zdb_nicenum(dd->dd_reserved, nice, sizeof (nice));
(void) printf("\t\treserved = %s\n", nice);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tprops_zapobj = %llu\n",
(u_longlong_t)dd->dd_props_zapobj);
(void) printf("\t\tdeleg_zapobj = %llu\n",
(u_longlong_t)dd->dd_deleg_zapobj);
(void) printf("\t\tflags = %llx\n",
(u_longlong_t)dd->dd_flags);
#define DO(which) \
zdb_nicenum(dd->dd_used_breakdown[DD_USED_ ## which], nice, \
sizeof (nice)); \
(void) printf("\t\tused_breakdown[" #which "] = %s\n", nice)
DO(HEAD);
DO(SNAP);
DO(CHILD);
DO(CHILD_RSRV);
DO(REFRSRV);
#undef DO
(void) printf("\t\tclones = %llu\n",
(u_longlong_t)dd->dd_clones);
2008-11-20 23:01:55 +03:00
}
/*ARGSUSED*/
static void
dump_dsl_dataset(objset_t *os, uint64_t object, void *data, size_t size)
{
dsl_dataset_phys_t *ds = data;
time_t crtime;
char used[32], compressed[32], uncompressed[32], unique[32];
2008-11-20 23:01:55 +03:00
char blkbuf[BP_SPRINTF_LEN];
/* make sure nicenum has enough space */
CTASSERT(sizeof (used) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (compressed) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncompressed) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (unique) >= NN_NUMBUF_SZ);
2008-11-20 23:01:55 +03:00
if (ds == NULL)
return;
ASSERT(size == sizeof (*ds));
crtime = ds->ds_creation_time;
zdb_nicenum(ds->ds_referenced_bytes, used, sizeof (used));
zdb_nicenum(ds->ds_compressed_bytes, compressed, sizeof (compressed));
zdb_nicenum(ds->ds_uncompressed_bytes, uncompressed,
sizeof (uncompressed));
zdb_nicenum(ds->ds_unique_bytes, unique, sizeof (unique));
snprintf_blkptr(blkbuf, sizeof (blkbuf), &ds->ds_bp);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tdir_obj = %llu\n",
2008-11-20 23:01:55 +03:00
(u_longlong_t)ds->ds_dir_obj);
(void) printf("\t\tprev_snap_obj = %llu\n",
(u_longlong_t)ds->ds_prev_snap_obj);
(void) printf("\t\tprev_snap_txg = %llu\n",
(u_longlong_t)ds->ds_prev_snap_txg);
(void) printf("\t\tnext_snap_obj = %llu\n",
(u_longlong_t)ds->ds_next_snap_obj);
(void) printf("\t\tsnapnames_zapobj = %llu\n",
(u_longlong_t)ds->ds_snapnames_zapobj);
(void) printf("\t\tnum_children = %llu\n",
(u_longlong_t)ds->ds_num_children);
2009-08-18 22:43:27 +04:00
(void) printf("\t\tuserrefs_obj = %llu\n",
(u_longlong_t)ds->ds_userrefs_obj);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tcreation_time = %s", ctime(&crtime));
(void) printf("\t\tcreation_txg = %llu\n",
(u_longlong_t)ds->ds_creation_txg);
(void) printf("\t\tdeadlist_obj = %llu\n",
(u_longlong_t)ds->ds_deadlist_obj);
(void) printf("\t\tused_bytes = %s\n", used);
(void) printf("\t\tcompressed_bytes = %s\n", compressed);
(void) printf("\t\tuncompressed_bytes = %s\n", uncompressed);
(void) printf("\t\tunique = %s\n", unique);
(void) printf("\t\tfsid_guid = %llu\n",
(u_longlong_t)ds->ds_fsid_guid);
(void) printf("\t\tguid = %llu\n",
(u_longlong_t)ds->ds_guid);
(void) printf("\t\tflags = %llx\n",
(u_longlong_t)ds->ds_flags);
(void) printf("\t\tnext_clones_obj = %llu\n",
(u_longlong_t)ds->ds_next_clones_obj);
(void) printf("\t\tprops_obj = %llu\n",
(u_longlong_t)ds->ds_props_obj);
2008-11-20 23:01:55 +03:00
(void) printf("\t\tbp = %s\n", blkbuf);
}
/* ARGSUSED */
static int
dump_bptree_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
char blkbuf[BP_SPRINTF_LEN];
if (bp->blk_birth != 0) {
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("\t%s\n", blkbuf);
}
return (0);
}
static void
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
dump_bptree(objset_t *os, uint64_t obj, const char *name)
{
char bytes[32];
bptree_phys_t *bt;
dmu_buf_t *db;
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
if (dump_opt['d'] < 3)
return;
VERIFY3U(0, ==, dmu_bonus_hold(os, obj, FTAG, &db));
bt = db->db_data;
zdb_nicenum(bt->bt_bytes, bytes, sizeof (bytes));
(void) printf("\n %s: %llu datasets, %s\n",
name, (unsigned long long)(bt->bt_end - bt->bt_begin), bytes);
dmu_buf_rele(db, FTAG);
if (dump_opt['d'] < 5)
return;
(void) printf("\n");
(void) bptree_iterate(os, obj, B_FALSE, dump_bptree_cb, NULL, NULL);
}
/* ARGSUSED */
static int
dump_bpobj_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
char blkbuf[BP_SPRINTF_LEN];
ASSERT(bp->blk_birth != 0);
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), bp);
(void) printf("\t%s\n", blkbuf);
return (0);
}
2008-11-20 23:01:55 +03:00
static void
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
dump_full_bpobj(bpobj_t *bpo, const char *name, int indent)
2008-11-20 23:01:55 +03:00
{
char bytes[32];
char comp[32];
char uncomp[32];
uint64_t i;
2008-11-20 23:01:55 +03:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
2008-11-20 23:01:55 +03:00
if (dump_opt['d'] < 3)
return;
zdb_nicenum(bpo->bpo_phys->bpo_bytes, bytes, sizeof (bytes));
if (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_subobjs != 0) {
zdb_nicenum(bpo->bpo_phys->bpo_comp, comp, sizeof (comp));
zdb_nicenum(bpo->bpo_phys->bpo_uncomp, uncomp, sizeof (uncomp));
(void) printf(" %*s: object %llu, %llu local blkptrs, "
"%llu subobjs in object, %llu, %s (%s/%s comp)\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
(u_longlong_t)bpo->bpo_phys->bpo_num_subobjs,
(u_longlong_t)bpo->bpo_phys->bpo_subobjs,
2008-11-20 23:01:55 +03:00
bytes, comp, uncomp);
for (i = 0; i < bpo->bpo_phys->bpo_num_subobjs; i++) {
uint64_t subobj;
bpobj_t subbpo;
int error;
VERIFY0(dmu_read(bpo->bpo_os,
bpo->bpo_phys->bpo_subobjs,
i * sizeof (subobj), sizeof (subobj), &subobj, 0));
error = bpobj_open(&subbpo, bpo->bpo_os, subobj);
if (error != 0) {
(void) printf("ERROR %u while trying to open "
"subobj id %llu\n",
error, (u_longlong_t)subobj);
continue;
}
dump_full_bpobj(&subbpo, "subobj", indent + 1);
bpobj_close(&subbpo);
}
2008-11-20 23:01:55 +03:00
} else {
(void) printf(" %*s: object %llu, %llu blkptrs, %s\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
bytes);
2008-11-20 23:01:55 +03:00
}
if (dump_opt['d'] < 5)
2008-11-20 23:01:55 +03:00
return;
if (indent == 0) {
(void) bpobj_iterate_nofree(bpo, dump_bpobj_cb, NULL, NULL);
(void) printf("\n");
}
}
2008-11-20 23:01:55 +03:00
static void
bpobj_count_refd(bpobj_t *bpo)
{
mos_obj_refd(bpo->bpo_object);
if (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_subobjs != 0) {
mos_obj_refd(bpo->bpo_phys->bpo_subobjs);
for (uint64_t i = 0; i < bpo->bpo_phys->bpo_num_subobjs; i++) {
uint64_t subobj;
bpobj_t subbpo;
int error;
VERIFY0(dmu_read(bpo->bpo_os,
bpo->bpo_phys->bpo_subobjs,
i * sizeof (subobj), sizeof (subobj), &subobj, 0));
error = bpobj_open(&subbpo, bpo->bpo_os, subobj);
if (error != 0) {
(void) printf("ERROR %u while trying to open "
"subobj id %llu\n",
error, (u_longlong_t)subobj);
continue;
}
bpobj_count_refd(&subbpo);
bpobj_close(&subbpo);
}
}
}
static void
dump_deadlist(dsl_deadlist_t *dl)
{
dsl_deadlist_entry_t *dle;
uint64_t unused;
char bytes[32];
char comp[32];
char uncomp[32];
uint64_t empty_bpobj =
dmu_objset_spa(dl->dl_os)->spa_dsl_pool->dp_empty_bpobj;
/* force the tree to be loaded */
dsl_deadlist_space_range(dl, 0, UINT64_MAX, &unused, &unused, &unused);
if (dl->dl_oldfmt) {
if (dl->dl_bpobj.bpo_object != empty_bpobj)
bpobj_count_refd(&dl->dl_bpobj);
} else {
mos_obj_refd(dl->dl_object);
for (dle = avl_first(&dl->dl_tree); dle;
dle = AVL_NEXT(&dl->dl_tree, dle)) {
if (dle->dle_bpobj.bpo_object != empty_bpobj)
bpobj_count_refd(&dle->dle_bpobj);
}
}
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
if (dump_opt['d'] < 3)
return;
2008-11-20 23:01:55 +03:00
if (dl->dl_oldfmt) {
dump_full_bpobj(&dl->dl_bpobj, "old-format deadlist", 0);
return;
}
zdb_nicenum(dl->dl_phys->dl_used, bytes, sizeof (bytes));
zdb_nicenum(dl->dl_phys->dl_comp, comp, sizeof (comp));
zdb_nicenum(dl->dl_phys->dl_uncomp, uncomp, sizeof (uncomp));
(void) printf("\n Deadlist: %s (%s/%s comp)\n",
bytes, comp, uncomp);
if (dump_opt['d'] < 4)
return;
(void) printf("\n");
for (dle = avl_first(&dl->dl_tree); dle;
dle = AVL_NEXT(&dl->dl_tree, dle)) {
if (dump_opt['d'] >= 5) {
char buf[128];
(void) snprintf(buf, sizeof (buf),
"mintxg %llu -> obj %llu",
(longlong_t)dle->dle_mintxg,
(longlong_t)dle->dle_bpobj.bpo_object);
dump_full_bpobj(&dle->dle_bpobj, buf, 0);
} else {
(void) printf("mintxg %llu -> obj %llu\n",
(longlong_t)dle->dle_mintxg,
(longlong_t)dle->dle_bpobj.bpo_object);
}
}
2008-11-20 23:01:55 +03:00
}
static avl_tree_t idx_tree;
static avl_tree_t domain_tree;
static boolean_t fuid_table_loaded;
static objset_t *sa_os = NULL;
static sa_attr_type_t *sa_attr_table = NULL;
static int
open_objset(const char *path, dmu_objset_type_t type, void *tag, objset_t **osp)
{
int err;
uint64_t sa_attrs = 0;
uint64_t version = 0;
VERIFY3P(sa_os, ==, NULL);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
err = dmu_objset_own(path, type, B_TRUE, B_FALSE, tag, osp);
if (err != 0) {
(void) fprintf(stderr, "failed to own dataset '%s': %s\n", path,
strerror(err));
return (err);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (dmu_objset_type(*osp) == DMU_OST_ZFS && !(*osp)->os_encrypted) {
(void) zap_lookup(*osp, MASTER_NODE_OBJ, ZPL_VERSION_STR,
8, 1, &version);
if (version >= ZPL_VERSION_SA) {
(void) zap_lookup(*osp, MASTER_NODE_OBJ, ZFS_SA_ATTRS,
8, 1, &sa_attrs);
}
err = sa_setup(*osp, sa_attrs, zfs_attr_table, ZPL_END,
&sa_attr_table);
if (err != 0) {
(void) fprintf(stderr, "sa_setup failed: %s\n",
strerror(err));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_objset_disown(*osp, B_FALSE, tag);
*osp = NULL;
}
}
sa_os = *osp;
return (0);
}
static void
close_objset(objset_t *os, void *tag)
{
VERIFY3P(os, ==, sa_os);
if (os->os_sa != NULL)
sa_tear_down(os);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_objset_disown(os, B_FALSE, tag);
sa_attr_table = NULL;
sa_os = NULL;
}
2008-11-20 23:01:55 +03:00
static void
fuid_table_destroy(void)
2008-11-20 23:01:55 +03:00
{
if (fuid_table_loaded) {
zfs_fuid_table_destroy(&idx_tree, &domain_tree);
fuid_table_loaded = B_FALSE;
}
}
/*
* print uid or gid information.
* For normal POSIX id just the id is printed in decimal format.
* For CIFS files with FUID the fuid is printed in hex followed by
* the domain-rid string.
2008-11-20 23:01:55 +03:00
*/
static void
print_idstr(uint64_t id, const char *id_type)
{
if (FUID_INDEX(id)) {
char *domain;
domain = zfs_fuid_idx_domain(&idx_tree, FUID_INDEX(id));
(void) printf("\t%s %llx [%s-%d]\n", id_type,
(u_longlong_t)id, domain, (int)FUID_RID(id));
} else {
(void) printf("\t%s %llu\n", id_type, (u_longlong_t)id);
}
}
static void
dump_uidgid(objset_t *os, uint64_t uid, uint64_t gid)
2008-11-20 23:01:55 +03:00
{
uint32_t uid_idx, gid_idx;
uid_idx = FUID_INDEX(uid);
gid_idx = FUID_INDEX(gid);
2008-11-20 23:01:55 +03:00
/* Load domain table, if not already loaded */
if (!fuid_table_loaded && (uid_idx || gid_idx)) {
uint64_t fuid_obj;
/* first find the fuid object. It lives in the master node */
VERIFY(zap_lookup(os, MASTER_NODE_OBJ, ZFS_FUID_TABLES,
8, 1, &fuid_obj) == 0);
2009-07-03 02:44:48 +04:00
zfs_fuid_avl_tree_create(&idx_tree, &domain_tree);
2008-11-20 23:01:55 +03:00
(void) zfs_fuid_table_load(os, fuid_obj,
&idx_tree, &domain_tree);
fuid_table_loaded = B_TRUE;
}
print_idstr(uid, "uid");
print_idstr(gid, "gid");
2008-11-20 23:01:55 +03:00
}
static void
dump_znode_sa_xattr(sa_handle_t *hdl)
{
nvlist_t *sa_xattr;
nvpair_t *elem = NULL;
int sa_xattr_size = 0;
int sa_xattr_entries = 0;
int error;
char *sa_xattr_packed;
error = sa_size(hdl, sa_attr_table[ZPL_DXATTR], &sa_xattr_size);
if (error || sa_xattr_size == 0)
return;
sa_xattr_packed = malloc(sa_xattr_size);
if (sa_xattr_packed == NULL)
return;
error = sa_lookup(hdl, sa_attr_table[ZPL_DXATTR],
sa_xattr_packed, sa_xattr_size);
if (error) {
free(sa_xattr_packed);
return;
}
error = nvlist_unpack(sa_xattr_packed, sa_xattr_size, &sa_xattr, 0);
if (error) {
free(sa_xattr_packed);
return;
}
while ((elem = nvlist_next_nvpair(sa_xattr, elem)) != NULL)
sa_xattr_entries++;
(void) printf("\tSA xattrs: %d bytes, %d entries\n\n",
sa_xattr_size, sa_xattr_entries);
while ((elem = nvlist_next_nvpair(sa_xattr, elem)) != NULL) {
uchar_t *value;
uint_t cnt, idx;
(void) printf("\t\t%s = ", nvpair_name(elem));
nvpair_value_byte_array(elem, &value, &cnt);
for (idx = 0; idx < cnt; ++idx) {
if (isprint(value[idx]))
(void) putchar(value[idx]);
else
(void) printf("\\%3.3o", value[idx]);
}
(void) putchar('\n');
}
nvlist_free(sa_xattr);
free(sa_xattr_packed);
}
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
static void
dump_znode(objset_t *os, uint64_t object, void *data, size_t size)
{
char path[MAXPATHLEN * 2]; /* allow for xattr and failure prefix */
sa_handle_t *hdl;
uint64_t xattr, rdev, gen;
uint64_t uid, gid, mode, fsize, parent, links;
uint64_t pflags;
uint64_t acctm[2], modtm[2], chgtm[2], crtm[2];
time_t z_crtime, z_atime, z_mtime, z_ctime;
sa_bulk_attr_t bulk[12];
int idx = 0;
2008-11-20 23:01:55 +03:00
int error;
VERIFY3P(os, ==, sa_os);
if (sa_handle_get(os, object, NULL, SA_HDL_PRIVATE, &hdl)) {
(void) printf("Failed to get handle for SA znode\n");
return;
}
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_UID], NULL, &uid, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_GID], NULL, &gid, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_LINKS], NULL,
&links, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_GEN], NULL, &gen, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_MODE], NULL,
&mode, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_PARENT],
NULL, &parent, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_SIZE], NULL,
&fsize, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_ATIME], NULL,
acctm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_MTIME], NULL,
modtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_CRTIME], NULL,
crtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_CTIME], NULL,
chgtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_FLAGS], NULL,
&pflags, 8);
if (sa_bulk_lookup(hdl, bulk, idx)) {
(void) sa_handle_destroy(hdl);
return;
}
2008-11-20 23:01:55 +03:00
z_crtime = (time_t)crtm[0];
z_atime = (time_t)acctm[0];
z_mtime = (time_t)modtm[0];
z_ctime = (time_t)chgtm[0];
2008-11-20 23:01:55 +03:00
if (dump_opt['d'] > 4) {
error = zfs_obj_to_path(os, object, path, sizeof (path));
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
if (error == ESTALE) {
(void) snprintf(path, sizeof (path), "on delete queue");
} else if (error != 0) {
leaked_objects++;
(void) snprintf(path, sizeof (path),
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
"path not found, possibly leaked");
}
(void) printf("\tpath %s\n", path);
}
dump_uidgid(os, uid, gid);
2008-11-20 23:01:55 +03:00
(void) printf("\tatime %s", ctime(&z_atime));
(void) printf("\tmtime %s", ctime(&z_mtime));
(void) printf("\tctime %s", ctime(&z_ctime));
(void) printf("\tcrtime %s", ctime(&z_crtime));
(void) printf("\tgen %llu\n", (u_longlong_t)gen);
(void) printf("\tmode %llo\n", (u_longlong_t)mode);
(void) printf("\tsize %llu\n", (u_longlong_t)fsize);
(void) printf("\tparent %llu\n", (u_longlong_t)parent);
(void) printf("\tlinks %llu\n", (u_longlong_t)links);
(void) printf("\tpflags %llx\n", (u_longlong_t)pflags);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (dmu_objset_projectquota_enabled(os) && (pflags & ZFS_PROJID)) {
uint64_t projid;
if (sa_lookup(hdl, sa_attr_table[ZPL_PROJID], &projid,
sizeof (uint64_t)) == 0)
(void) printf("\tprojid %llu\n", (u_longlong_t)projid);
}
if (sa_lookup(hdl, sa_attr_table[ZPL_XATTR], &xattr,
sizeof (uint64_t)) == 0)
(void) printf("\txattr %llu\n", (u_longlong_t)xattr);
if (sa_lookup(hdl, sa_attr_table[ZPL_RDEV], &rdev,
sizeof (uint64_t)) == 0)
(void) printf("\trdev 0x%016llx\n", (u_longlong_t)rdev);
dump_znode_sa_xattr(hdl);
sa_handle_destroy(hdl);
2008-11-20 23:01:55 +03:00
}
/*ARGSUSED*/
static void
dump_acl(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_dmu_objset(objset_t *os, uint64_t object, void *data, size_t size)
{
}
static object_viewer_t *object_viewer[DMU_OT_NUMTYPES + 1] = {
2008-11-20 23:01:55 +03:00
dump_none, /* unallocated */
dump_zap, /* object directory */
dump_uint64, /* object array */
dump_none, /* packed nvlist */
dump_packed_nvlist, /* packed nvlist size */
dump_none, /* bpobj */
dump_bpobj, /* bpobj header */
2008-11-20 23:01:55 +03:00
dump_none, /* SPA space map header */
dump_none, /* SPA space map */
dump_none, /* ZIL intent log */
dump_dnode, /* DMU dnode */
dump_dmu_objset, /* DMU objset */
dump_dsl_dir, /* DSL directory */
dump_zap, /* DSL directory child map */
dump_zap, /* DSL dataset snap map */
dump_zap, /* DSL props */
dump_dsl_dataset, /* DSL dataset */
dump_znode, /* ZFS znode */
dump_acl, /* ZFS V0 ACL */
dump_uint8, /* ZFS plain file */
dump_zpldir, /* ZFS directory */
dump_zap, /* ZFS master node */
dump_zap, /* ZFS delete queue */
dump_uint8, /* zvol object */
dump_zap, /* zvol prop */
dump_uint8, /* other uint8[] */
dump_uint64, /* other uint64[] */
dump_zap, /* other ZAP */
dump_zap, /* persistent error log */
dump_uint8, /* SPA history */
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
dump_history_offsets, /* SPA history offsets */
2008-11-20 23:01:55 +03:00
dump_zap, /* Pool properties */
dump_zap, /* DSL permissions */
dump_acl, /* ZFS ACL */
dump_uint8, /* ZFS SYSACL */
dump_none, /* FUID nvlist */
dump_packed_nvlist, /* FUID nvlist size */
dump_zap, /* DSL dataset next clones */
dump_zap, /* DSL scrub queue */
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
dump_zap, /* ZFS user/group/project used */
dump_zap, /* ZFS user/group/project quota */
2009-08-18 22:43:27 +04:00
dump_zap, /* snapshot refcount tags */
dump_ddt_zap, /* DDT ZAP object */
dump_zap, /* DDT statistics */
dump_znode, /* SA object */
dump_zap, /* SA Master Node */
dump_sa_attrs, /* SA attribute registration */
dump_sa_layouts, /* SA attribute layouts */
dump_zap, /* DSL scrub translations */
dump_none, /* fake dedup BP */
dump_zap, /* deadlist */
dump_none, /* deadlist hdr */
dump_zap, /* dsl clones */
dump_bpobj_subobjs, /* bpobj subobjs */
dump_unknown, /* Unknown type, must be last */
2008-11-20 23:01:55 +03:00
};
static void
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
dump_object(objset_t *os, uint64_t object, int verbosity, int *print_header,
uint64_t *dnode_slots_used)
2008-11-20 23:01:55 +03:00
{
dmu_buf_t *db = NULL;
dmu_object_info_t doi;
dnode_t *dn;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
boolean_t dnode_held = B_FALSE;
2008-11-20 23:01:55 +03:00
void *bonus = NULL;
size_t bsize = 0;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
char iblk[32], dblk[32], lsize[32], asize[32], fill[32], dnsize[32];
char bonus_size[32];
2008-11-20 23:01:55 +03:00
char aux[50];
int error;
/* make sure nicenum has enough space */
CTASSERT(sizeof (iblk) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (dblk) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (lsize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (asize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (bonus_size) >= NN_NUMBUF_SZ);
2008-11-20 23:01:55 +03:00
if (*print_header) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
(void) printf("\n%10s %3s %5s %5s %5s %6s %5s %6s %s\n",
"Object", "lvl", "iblk", "dblk", "dsize", "dnsize",
"lsize", "%full", "type");
2008-11-20 23:01:55 +03:00
*print_header = 0;
}
if (object == 0) {
dn = DMU_META_DNODE(os);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_object_info_from_dnode(dn, &doi);
2008-11-20 23:01:55 +03:00
} else {
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* Encrypted datasets will have sensitive bonus buffers
* encrypted. Therefore we cannot hold the bonus buffer and
* must hold the dnode itself instead.
*/
error = dmu_object_info(os, object, &doi);
2008-11-20 23:01:55 +03:00
if (error)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
fatal("dmu_object_info() failed, errno %u", error);
if (os->os_encrypted &&
DMU_OT_IS_ENCRYPTED(doi.doi_bonus_type)) {
error = dnode_hold(os, object, FTAG, &dn);
if (error)
fatal("dnode_hold() failed, errno %u", error);
dnode_held = B_TRUE;
} else {
error = dmu_bonus_hold(os, object, FTAG, &db);
if (error)
fatal("dmu_bonus_hold(%llu) failed, errno %u",
object, error);
bonus = db->db_data;
bsize = db->db_size;
dn = DB_DNODE((dmu_buf_impl_t *)db);
}
2008-11-20 23:01:55 +03:00
}
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
if (dnode_slots_used)
*dnode_slots_used = doi.doi_dnodesize / DNODE_MIN_SIZE;
zdb_nicenum(doi.doi_metadata_block_size, iblk, sizeof (iblk));
zdb_nicenum(doi.doi_data_block_size, dblk, sizeof (dblk));
zdb_nicenum(doi.doi_max_offset, lsize, sizeof (lsize));
zdb_nicenum(doi.doi_physical_blocks_512 << 9, asize, sizeof (asize));
zdb_nicenum(doi.doi_bonus_size, bonus_size, sizeof (bonus_size));
zdb_nicenum(doi.doi_dnodesize, dnsize, sizeof (dnsize));
(void) sprintf(fill, "%6.2f", 100.0 * doi.doi_fill_count *
doi.doi_data_block_size / (object == 0 ? DNODES_PER_BLOCK : 1) /
doi.doi_max_offset);
2008-11-20 23:01:55 +03:00
aux[0] = '\0';
if (doi.doi_checksum != ZIO_CHECKSUM_INHERIT || verbosity >= 6) {
(void) snprintf(aux + strlen(aux), sizeof (aux) - strlen(aux),
" (K=%s)", ZDB_CHECKSUM_NAME(doi.doi_checksum));
2008-11-20 23:01:55 +03:00
}
if (doi.doi_compress != ZIO_COMPRESS_INHERIT || verbosity >= 6) {
(void) snprintf(aux + strlen(aux), sizeof (aux) - strlen(aux),
" (Z=%s)", ZDB_COMPRESS_NAME(doi.doi_compress));
2008-11-20 23:01:55 +03:00
}
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
(void) printf("%10lld %3u %5s %5s %5s %6s %5s %6s %s%s\n",
(u_longlong_t)object, doi.doi_indirection, iblk, dblk,
asize, dnsize, lsize, fill, zdb_ot_name(doi.doi_type), aux);
2008-11-20 23:01:55 +03:00
if (doi.doi_bonus_type != DMU_OT_NONE && verbosity > 3) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
(void) printf("%10s %3s %5s %5s %5s %5s %5s %6s %s\n",
"", "", "", "", "", "", bonus_size, "bonus",
zdb_ot_name(doi.doi_bonus_type));
2008-11-20 23:01:55 +03:00
}
if (verbosity >= 4) {
(void) printf("\tdnode flags: %s%s%s%s\n",
2009-07-03 02:44:48 +04:00
(dn->dn_phys->dn_flags & DNODE_FLAG_USED_BYTES) ?
"USED_BYTES " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_USERUSED_ACCOUNTED) ?
"USERUSED_ACCOUNTED " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_USEROBJUSED_ACCOUNTED) ?
"USEROBJUSED_ACCOUNTED " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR) ?
"SPILL_BLKPTR" : "");
2009-07-03 02:44:48 +04:00
(void) printf("\tdnode maxblkid: %llu\n",
(longlong_t)dn->dn_phys->dn_maxblkid);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (!dnode_held) {
object_viewer[ZDB_OT_TYPE(doi.doi_bonus_type)](os,
object, bonus, bsize);
} else {
(void) printf("\t\t(bonus encrypted)\n");
}
if (!os->os_encrypted || !DMU_OT_IS_ENCRYPTED(doi.doi_type)) {
object_viewer[ZDB_OT_TYPE(doi.doi_type)](os, object,
NULL, 0);
} else {
(void) printf("\t\t(object encrypted)\n");
}
2008-11-20 23:01:55 +03:00
*print_header = 1;
}
if (verbosity >= 5)
dump_indirect(dn);
2008-11-20 23:01:55 +03:00
if (verbosity >= 5) {
/*
* Report the list of segments that comprise the object.
*/
uint64_t start = 0;
uint64_t end;
uint64_t blkfill = 1;
int minlvl = 1;
if (dn->dn_type == DMU_OT_DNODE) {
minlvl = 0;
blkfill = DNODES_PER_BLOCK;
}
for (;;) {
char segsize[32];
/* make sure nicenum has enough space */
CTASSERT(sizeof (segsize) >= NN_NUMBUF_SZ);
error = dnode_next_offset(dn,
0, &start, minlvl, blkfill, 0);
2008-11-20 23:01:55 +03:00
if (error)
break;
end = start;
error = dnode_next_offset(dn,
DNODE_FIND_HOLE, &end, minlvl, blkfill, 0);
zdb_nicenum(end - start, segsize, sizeof (segsize));
2008-11-20 23:01:55 +03:00
(void) printf("\t\tsegment [%016llx, %016llx)"
" size %5s\n", (u_longlong_t)start,
(u_longlong_t)end, segsize);
if (error)
break;
start = end;
}
}
if (db != NULL)
dmu_buf_rele(db, FTAG);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (dnode_held)
dnode_rele(dn, FTAG);
2008-11-20 23:01:55 +03:00
}
static void
count_dir_mos_objects(dsl_dir_t *dd)
{
mos_obj_refd(dd->dd_object);
mos_obj_refd(dsl_dir_phys(dd)->dd_child_dir_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_deleg_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_props_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_clones);
/*
* The dd_crypto_obj can be referenced by multiple dsl_dir's.
* Ignore the references after the first one.
*/
mos_obj_refd_multiple(dd->dd_crypto_obj);
}
static void
count_ds_mos_objects(dsl_dataset_t *ds)
{
mos_obj_refd(ds->ds_object);
mos_obj_refd(dsl_dataset_phys(ds)->ds_next_clones_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_props_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_userrefs_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_snapnames_zapobj);
if (!dsl_dataset_is_snapshot(ds)) {
count_dir_mos_objects(ds->ds_dir);
}
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static const char *objset_types[DMU_OST_NUMTYPES] = {
2008-11-20 23:01:55 +03:00
"NONE", "META", "ZPL", "ZVOL", "OTHER", "ANY" };
static void
dump_dir(objset_t *os)
{
dmu_objset_stats_t dds;
uint64_t object, object_count;
uint64_t refdbytes, usedobjs, scratch;
char numbuf[32];
2009-07-03 02:44:48 +04:00
char blkbuf[BP_SPRINTF_LEN + 20];
char osname[ZFS_MAX_DATASET_NAME_LEN];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *type = "UNKNOWN";
2008-11-20 23:01:55 +03:00
int verbosity = dump_opt['d'];
int print_header = 1;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned i;
int error;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
uint64_t total_slots_used = 0;
uint64_t max_slot_used = 0;
uint64_t dnode_slots;
2008-11-20 23:01:55 +03:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (numbuf) >= NN_NUMBUF_SZ);
dsl_pool_config_enter(dmu_objset_pool(os), FTAG);
2008-11-20 23:01:55 +03:00
dmu_objset_fast_stat(os, &dds);
dsl_pool_config_exit(dmu_objset_pool(os), FTAG);
2008-11-20 23:01:55 +03:00
if (dds.dds_type < DMU_OST_NUMTYPES)
type = objset_types[dds.dds_type];
if (dds.dds_type == DMU_OST_META) {
dds.dds_creation_txg = TXG_INITIAL;
usedobjs = BP_GET_FILL(os->os_rootbp);
refdbytes = dsl_dir_phys(os->os_spa->spa_dsl_pool->dp_mos_dir)->
dd_used_bytes;
2008-11-20 23:01:55 +03:00
} else {
dmu_objset_space(os, &refdbytes, &scratch, &usedobjs, &scratch);
}
ASSERT3U(usedobjs, ==, BP_GET_FILL(os->os_rootbp));
2008-11-20 23:01:55 +03:00
zdb_nicenum(refdbytes, numbuf, sizeof (numbuf));
2008-11-20 23:01:55 +03:00
if (verbosity >= 4) {
(void) snprintf(blkbuf, sizeof (blkbuf), ", rootbp ");
(void) snprintf_blkptr(blkbuf + strlen(blkbuf),
sizeof (blkbuf) - strlen(blkbuf), os->os_rootbp);
2008-11-20 23:01:55 +03:00
} else {
blkbuf[0] = '\0';
}
dmu_objset_name(os, osname);
(void) printf("Dataset %s [%s], ID %llu, cr_txg %llu, "
"%s, %llu objects%s%s\n",
2008-11-20 23:01:55 +03:00
osname, type, (u_longlong_t)dmu_objset_id(os),
(u_longlong_t)dds.dds_creation_txg,
numbuf, (u_longlong_t)usedobjs, blkbuf,
(dds.dds_inconsistent) ? " (inconsistent)" : "");
2008-11-20 23:01:55 +03:00
if (zopt_objects != 0) {
for (i = 0; i < zopt_objects; i++)
dump_object(os, zopt_object[i], verbosity,
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
&print_header, NULL);
2008-11-20 23:01:55 +03:00
(void) printf("\n");
return;
}
if (dump_opt['i'] != 0 || verbosity >= 2)
dump_intent_log(dmu_objset_zil(os));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (dmu_objset_ds(os) != NULL) {
dsl_dataset_t *ds = dmu_objset_ds(os);
dump_deadlist(&ds->ds_deadlist);
if (dsl_dataset_remap_deadlist_exists(ds)) {
(void) printf("ds_remap_deadlist:\n");
dump_deadlist(&ds->ds_remap_deadlist);
}
count_ds_mos_objects(ds);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
if (verbosity < 2)
return;
if (BP_IS_HOLE(os->os_rootbp))
return;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
dump_object(os, 0, verbosity, &print_header, NULL);
2009-07-03 02:44:48 +04:00
object_count = 0;
if (DMU_USERUSED_DNODE(os) != NULL &&
DMU_USERUSED_DNODE(os)->dn_type != 0) {
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
dump_object(os, DMU_USERUSED_OBJECT, verbosity, &print_header,
NULL);
dump_object(os, DMU_GROUPUSED_OBJECT, verbosity, &print_header,
NULL);
2009-07-03 02:44:48 +04:00
}
2008-11-20 23:01:55 +03:00
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (DMU_PROJECTUSED_DNODE(os) != NULL &&
DMU_PROJECTUSED_DNODE(os)->dn_type != 0)
dump_object(os, DMU_PROJECTUSED_OBJECT, verbosity,
&print_header, NULL);
2008-11-20 23:01:55 +03:00
object = 0;
while ((error = dmu_object_next(os, &object, B_FALSE, 0)) == 0) {
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
dump_object(os, object, verbosity, &print_header, &dnode_slots);
2008-11-20 23:01:55 +03:00
object_count++;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
total_slots_used += dnode_slots;
max_slot_used = object + dnode_slots - 1;
2008-11-20 23:01:55 +03:00
}
(void) printf("\n");
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
(void) printf(" Dnode slots:\n");
(void) printf("\tTotal used: %10llu\n",
(u_longlong_t)total_slots_used);
(void) printf("\tMax used: %10llu\n",
(u_longlong_t)max_slot_used);
(void) printf("\tPercent empty: %10lf\n",
(double)(max_slot_used - total_slots_used)*100 /
(double)max_slot_used);
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
ASSERT3U(object_count, ==, usedobjs);
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
(void) printf("\n");
2009-07-03 02:44:48 +04:00
if (error != ESRCH) {
(void) fprintf(stderr, "dmu_object_next() = %d\n", error);
abort();
}
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
if (leaked_objects != 0) {
(void) printf("%d potentially leaked objects detected\n",
leaked_objects);
leaked_objects = 0;
}
2008-11-20 23:01:55 +03:00
}
static void
dump_uberblock(uberblock_t *ub, const char *header, const char *footer)
2008-11-20 23:01:55 +03:00
{
time_t timestamp = ub->ub_timestamp;
(void) printf("%s", header ? header : "");
2008-11-20 23:01:55 +03:00
(void) printf("\tmagic = %016llx\n", (u_longlong_t)ub->ub_magic);
(void) printf("\tversion = %llu\n", (u_longlong_t)ub->ub_version);
(void) printf("\ttxg = %llu\n", (u_longlong_t)ub->ub_txg);
(void) printf("\tguid_sum = %llu\n", (u_longlong_t)ub->ub_guid_sum);
(void) printf("\ttimestamp = %llu UTC = %s",
(u_longlong_t)ub->ub_timestamp, asctime(localtime(&timestamp)));
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
(void) printf("\tmmp_magic = %016llx\n",
(u_longlong_t)ub->ub_mmp_magic);
if (ub->ub_mmp_magic == MMP_MAGIC)
(void) printf("\tmmp_delay = %0llu\n",
(u_longlong_t)ub->ub_mmp_delay);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
if (dump_opt['u'] >= 4) {
2008-11-20 23:01:55 +03:00
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), &ub->ub_rootbp);
2008-11-20 23:01:55 +03:00
(void) printf("\trootbp = %s\n", blkbuf);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
(void) printf("\tcheckpoint_txg = %llu\n",
(u_longlong_t)ub->ub_checkpoint_txg);
(void) printf("%s", footer ? footer : "");
2008-11-20 23:01:55 +03:00
}
static void
dump_config(spa_t *spa)
2008-11-20 23:01:55 +03:00
{
dmu_buf_t *db;
size_t nvsize = 0;
int error = 0;
2008-11-20 23:01:55 +03:00
error = dmu_bonus_hold(spa->spa_meta_objset,
spa->spa_config_object, FTAG, &db);
if (error == 0) {
nvsize = *(uint64_t *)db->db_data;
dmu_buf_rele(db, FTAG);
(void) printf("\nMOS Configuration:\n");
dump_packed_nvlist(spa->spa_meta_objset,
spa->spa_config_object, (void *)&nvsize, 1);
} else {
(void) fprintf(stderr, "dmu_bonus_hold(%llu) failed, errno %d",
(u_longlong_t)spa->spa_config_object, error);
}
}
static void
dump_cachefile(const char *cachefile)
{
int fd;
struct stat64 statbuf;
char *buf;
nvlist_t *config;
if ((fd = open64(cachefile, O_RDONLY)) < 0) {
(void) printf("cannot open '%s': %s\n", cachefile,
strerror(errno));
exit(1);
}
if (fstat64(fd, &statbuf) != 0) {
(void) printf("failed to stat '%s': %s\n", cachefile,
strerror(errno));
exit(1);
}
if ((buf = malloc(statbuf.st_size)) == NULL) {
(void) fprintf(stderr, "failed to allocate %llu bytes\n",
(u_longlong_t)statbuf.st_size);
exit(1);
}
if (read(fd, buf, statbuf.st_size) != statbuf.st_size) {
(void) fprintf(stderr, "failed to read %llu bytes\n",
(u_longlong_t)statbuf.st_size);
exit(1);
}
(void) close(fd);
if (nvlist_unpack(buf, statbuf.st_size, &config, 0) != 0) {
(void) fprintf(stderr, "failed to unpack nvlist\n");
exit(1);
}
free(buf);
dump_nvlist(config, 0);
nvlist_free(config);
}
/*
* ZFS label nvlist stats
*/
typedef struct zdb_nvl_stats {
int zns_list_count;
int zns_leaf_count;
size_t zns_leaf_largest;
size_t zns_leaf_total;
nvlist_t *zns_string;
nvlist_t *zns_uint64;
nvlist_t *zns_boolean;
} zdb_nvl_stats_t;
static void
collect_nvlist_stats(nvlist_t *nvl, zdb_nvl_stats_t *stats)
{
nvlist_t *list, **array;
nvpair_t *nvp = NULL;
char *name;
uint_t i, items;
stats->zns_list_count++;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
name = nvpair_name(nvp);
switch (nvpair_type(nvp)) {
case DATA_TYPE_STRING:
fnvlist_add_string(stats->zns_string, name,
fnvpair_value_string(nvp));
break;
case DATA_TYPE_UINT64:
fnvlist_add_uint64(stats->zns_uint64, name,
fnvpair_value_uint64(nvp));
break;
case DATA_TYPE_BOOLEAN:
fnvlist_add_boolean(stats->zns_boolean, name);
break;
case DATA_TYPE_NVLIST:
if (nvpair_value_nvlist(nvp, &list) == 0)
collect_nvlist_stats(list, stats);
break;
case DATA_TYPE_NVLIST_ARRAY:
if (nvpair_value_nvlist_array(nvp, &array, &items) != 0)
break;
for (i = 0; i < items; i++) {
collect_nvlist_stats(array[i], stats);
/* collect stats on leaf vdev */
if (strcmp(name, "children") == 0) {
size_t size;
(void) nvlist_size(array[i], &size,
NV_ENCODE_XDR);
stats->zns_leaf_total += size;
if (size > stats->zns_leaf_largest)
stats->zns_leaf_largest = size;
stats->zns_leaf_count++;
}
}
break;
default:
(void) printf("skip type %d!\n", (int)nvpair_type(nvp));
}
}
}
static void
dump_nvlist_stats(nvlist_t *nvl, size_t cap)
{
zdb_nvl_stats_t stats = { 0 };
size_t size, sum = 0, total;
size_t noise;
/* requires nvlist with non-unique names for stat collection */
VERIFY0(nvlist_alloc(&stats.zns_string, 0, 0));
VERIFY0(nvlist_alloc(&stats.zns_uint64, 0, 0));
VERIFY0(nvlist_alloc(&stats.zns_boolean, 0, 0));
VERIFY0(nvlist_size(stats.zns_boolean, &noise, NV_ENCODE_XDR));
(void) printf("\n\nZFS Label NVList Config Stats:\n");
VERIFY0(nvlist_size(nvl, &total, NV_ENCODE_XDR));
(void) printf(" %d bytes used, %d bytes free (using %4.1f%%)\n\n",
(int)total, (int)(cap - total), 100.0 * total / cap);
collect_nvlist_stats(nvl, &stats);
VERIFY0(nvlist_size(stats.zns_uint64, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "integers:",
(int)fnvlist_num_pairs(stats.zns_uint64),
(int)size, 100.0 * size / total);
VERIFY0(nvlist_size(stats.zns_string, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "strings:",
(int)fnvlist_num_pairs(stats.zns_string),
(int)size, 100.0 * size / total);
VERIFY0(nvlist_size(stats.zns_boolean, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "booleans:",
(int)fnvlist_num_pairs(stats.zns_boolean),
(int)size, 100.0 * size / total);
size = total - sum; /* treat remainder as nvlist overhead */
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n\n", "nvlists:",
stats.zns_list_count, (int)size, 100.0 * size / total);
if (stats.zns_leaf_count > 0) {
size_t average = stats.zns_leaf_total / stats.zns_leaf_count;
(void) printf("%12s %4d %6d bytes average\n", "leaf vdevs:",
stats.zns_leaf_count, (int)average);
(void) printf("%24d bytes largest\n",
(int)stats.zns_leaf_largest);
if (dump_opt['l'] >= 3 && average > 0)
(void) printf(" space for %d additional leaf vdevs\n",
(int)((cap - total) / average));
}
(void) printf("\n");
nvlist_free(stats.zns_string);
nvlist_free(stats.zns_uint64);
nvlist_free(stats.zns_boolean);
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
typedef struct cksum_record {
zio_cksum_t cksum;
boolean_t labels[VDEV_LABELS];
avl_node_t link;
} cksum_record_t;
static int
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
cksum_record_compare(const void *x1, const void *x2)
2008-11-20 23:01:55 +03:00
{
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
const cksum_record_t *l = (cksum_record_t *)x1;
const cksum_record_t *r = (cksum_record_t *)x2;
int arraysize = ARRAY_SIZE(l->cksum.zc_word);
int difference;
for (int i = 0; i < arraysize; i++) {
difference = AVL_CMP(l->cksum.zc_word[i], r->cksum.zc_word[i]);
if (difference)
break;
}
return (difference);
}
static cksum_record_t *
cksum_record_alloc(zio_cksum_t *cksum, int l)
{
cksum_record_t *rec;
rec = umem_zalloc(sizeof (*rec), UMEM_NOFAIL);
rec->cksum = *cksum;
rec->labels[l] = B_TRUE;
return (rec);
}
static cksum_record_t *
cksum_record_lookup(avl_tree_t *tree, zio_cksum_t *cksum)
{
cksum_record_t lookup = { .cksum = *cksum };
avl_index_t where;
return (avl_find(tree, &lookup, &where));
}
static cksum_record_t *
cksum_record_insert(avl_tree_t *tree, zio_cksum_t *cksum, int l)
{
cksum_record_t *rec;
rec = cksum_record_lookup(tree, cksum);
if (rec) {
rec->labels[l] = B_TRUE;
} else {
rec = cksum_record_alloc(cksum, l);
avl_add(tree, rec);
}
return (rec);
}
static int
first_label(cksum_record_t *rec)
{
for (int i = 0; i < VDEV_LABELS; i++)
if (rec->labels[i])
return (i);
return (-1);
}
static void
print_label_numbers(char *prefix, cksum_record_t *rec)
{
printf("%s", prefix);
for (int i = 0; i < VDEV_LABELS; i++)
if (rec->labels[i] == B_TRUE)
printf("%d ", i);
printf("\n");
}
#define MAX_UBERBLOCK_COUNT (VDEV_UBERBLOCK_RING >> UBERBLOCK_SHIFT)
typedef struct label {
2008-11-20 23:01:55 +03:00
vdev_label_t label;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
nvlist_t *config_nv;
cksum_record_t *config;
cksum_record_t *uberblocks[MAX_UBERBLOCK_COUNT];
boolean_t header_printed;
boolean_t read_failed;
} label_t;
static void
print_label_header(label_t *label, int l)
{
if (dump_opt['q'])
return;
if (label->header_printed == B_TRUE)
return;
(void) printf("------------------------------------\n");
(void) printf("LABEL %d\n", l);
(void) printf("------------------------------------\n");
label->header_printed = B_TRUE;
}
static void
dump_config_from_label(label_t *label, size_t buflen, int l)
{
if (dump_opt['q'])
return;
if ((dump_opt['l'] < 3) && (first_label(label->config) != l))
return;
print_label_header(label, l);
dump_nvlist(label->config_nv, 4);
print_label_numbers(" labels = ", label->config);
if (dump_opt['l'] >= 2)
dump_nvlist_stats(label->config_nv, buflen);
}
#define ZDB_MAX_UB_HEADER_SIZE 32
static void
dump_label_uberblocks(label_t *label, uint64_t ashift, int label_num)
{
vdev_t vd;
char header[ZDB_MAX_UB_HEADER_SIZE];
vd.vdev_ashift = ashift;
vd.vdev_top = &vd;
for (int i = 0; i < VDEV_UBERBLOCK_COUNT(&vd); i++) {
uint64_t uoff = VDEV_UBERBLOCK_OFFSET(&vd, i);
uberblock_t *ub = (void *)((char *)&label->label + uoff);
cksum_record_t *rec = label->uberblocks[i];
if (rec == NULL) {
if (dump_opt['u'] >= 2) {
print_label_header(label, label_num);
(void) printf(" Uberblock[%d] invalid\n", i);
}
continue;
}
if ((dump_opt['u'] < 3) && (first_label(rec) != label_num))
continue;
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
if ((dump_opt['u'] < 4) &&
(ub->ub_mmp_magic == MMP_MAGIC) && ub->ub_mmp_delay &&
(i >= VDEV_UBERBLOCK_COUNT(&vd) - MMP_BLOCKS_PER_LABEL))
continue;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
print_label_header(label, label_num);
(void) snprintf(header, ZDB_MAX_UB_HEADER_SIZE,
" Uberblock[%d]\n", i);
dump_uberblock(ub, header, "");
print_label_numbers(" labels = ", rec);
}
}
static char curpath[PATH_MAX];
/*
* Iterate through the path components, recursively passing
* current one's obj and remaining path until we find the obj
* for the last one.
*/
static int
dump_path_impl(objset_t *os, uint64_t obj, char *name)
{
int err;
int header = 1;
uint64_t child_obj;
char *s;
dmu_buf_t *db;
dmu_object_info_t doi;
if ((s = strchr(name, '/')) != NULL)
*s = '\0';
err = zap_lookup(os, obj, name, 8, 1, &child_obj);
(void) strlcat(curpath, name, sizeof (curpath));
if (err != 0) {
(void) fprintf(stderr, "failed to lookup %s: %s\n",
curpath, strerror(err));
return (err);
}
child_obj = ZFS_DIRENT_OBJ(child_obj);
err = sa_buf_hold(os, child_obj, FTAG, &db);
if (err != 0) {
(void) fprintf(stderr,
"failed to get SA dbuf for obj %llu: %s\n",
(u_longlong_t)child_obj, strerror(err));
return (EINVAL);
}
dmu_object_info_from_db(db, &doi);
sa_buf_rele(db, FTAG);
if (doi.doi_bonus_type != DMU_OT_SA &&
doi.doi_bonus_type != DMU_OT_ZNODE) {
(void) fprintf(stderr, "invalid bonus type %d for obj %llu\n",
doi.doi_bonus_type, (u_longlong_t)child_obj);
return (EINVAL);
}
if (dump_opt['v'] > 6) {
(void) printf("obj=%llu %s type=%d bonustype=%d\n",
(u_longlong_t)child_obj, curpath, doi.doi_type,
doi.doi_bonus_type);
}
(void) strlcat(curpath, "/", sizeof (curpath));
switch (doi.doi_type) {
case DMU_OT_DIRECTORY_CONTENTS:
if (s != NULL && *(s + 1) != '\0')
return (dump_path_impl(os, child_obj, s + 1));
/*FALLTHROUGH*/
case DMU_OT_PLAIN_FILE_CONTENTS:
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-06 02:15:04 +03:00
dump_object(os, child_obj, dump_opt['v'], &header, NULL);
return (0);
default:
(void) fprintf(stderr, "object %llu has non-file/directory "
"type %d\n", (u_longlong_t)obj, doi.doi_type);
break;
}
return (EINVAL);
}
/*
* Dump the blocks for the object specified by path inside the dataset.
*/
static int
dump_path(char *ds, char *path)
{
int err;
objset_t *os;
uint64_t root_obj;
err = open_objset(ds, DMU_OST_ZFS, FTAG, &os);
if (err != 0)
return (err);
err = zap_lookup(os, MASTER_NODE_OBJ, ZFS_ROOT_OBJ, 8, 1, &root_obj);
if (err != 0) {
(void) fprintf(stderr, "can't lookup root znode: %s\n",
strerror(err));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_objset_disown(os, B_FALSE, FTAG);
return (EINVAL);
}
(void) snprintf(curpath, sizeof (curpath), "dataset=%s path=/", ds);
err = dump_path_impl(os, root_obj, path);
close_objset(os, FTAG);
return (err);
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
static int
dump_label(const char *dev)
{
char path[MAXPATHLEN];
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
label_t labels[VDEV_LABELS];
uint64_t psize, ashift;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
struct stat64 statbuf;
boolean_t config_found = B_FALSE;
boolean_t error = B_FALSE;
avl_tree_t config_tree;
avl_tree_t uberblock_tree;
void *node, *cookie;
int fd;
bzero(labels, sizeof (labels));
2008-11-20 23:01:55 +03:00
/*
* Check if we were given absolute path and use it as is.
* Otherwise if the provided vdev name doesn't point to a file,
* try prepending expected disk paths and partition numbers.
*/
(void) strlcpy(path, dev, sizeof (path));
if (dev[0] != '/' && stat64(path, &statbuf) != 0) {
int error;
error = zfs_resolve_shortname(dev, path, MAXPATHLEN);
if (error == 0 && zfs_dev_is_whole_disk(path)) {
if (zfs_append_partition(path, MAXPATHLEN) == -1)
error = ENOENT;
}
if (error || (stat64(path, &statbuf) != 0)) {
(void) printf("failed to find device %s, try "
"specifying absolute path instead\n", dev);
return (1);
}
}
if ((fd = open64(path, O_RDONLY)) < 0) {
(void) printf("cannot open '%s': %s\n", path, strerror(errno));
2008-11-20 23:01:55 +03:00
exit(1);
}
if (fstat64_blk(fd, &statbuf) != 0) {
(void) printf("failed to stat '%s': %s\n", path,
2008-11-20 23:01:55 +03:00
strerror(errno));
(void) close(fd);
exit(1);
}
if (S_ISBLK(statbuf.st_mode) && ioctl(fd, BLKFLSBUF) != 0)
(void) printf("failed to invalidate cache '%s' : %s\n", path,
strerror(errno));
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
avl_create(&config_tree, cksum_record_compare,
sizeof (cksum_record_t), offsetof(cksum_record_t, link));
avl_create(&uberblock_tree, cksum_record_compare,
sizeof (cksum_record_t), offsetof(cksum_record_t, link));
2008-11-20 23:01:55 +03:00
psize = statbuf.st_size;
psize = P2ALIGN(psize, (uint64_t)sizeof (vdev_label_t));
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
ashift = SPA_MINBLOCKSHIFT;
2008-11-20 23:01:55 +03:00
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
/*
* 1. Read the label from disk
* 2. Unpack the configuration and insert in config tree.
* 3. Traverse all uberblocks and insert in uberblock tree.
*/
for (int l = 0; l < VDEV_LABELS; l++) {
label_t *label = &labels[l];
char *buf = label->label.vl_vdev_phys.vp_nvlist;
size_t buflen = sizeof (label->label.vl_vdev_phys.vp_nvlist);
nvlist_t *config;
cksum_record_t *rec;
zio_cksum_t cksum;
vdev_t vd;
if (pread64(fd, &label->label, sizeof (label->label),
vdev_label_offset(psize, l, 0)) != sizeof (label->label)) {
if (!dump_opt['q'])
(void) printf("failed to read label %d\n", l);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
label->read_failed = B_TRUE;
error = B_TRUE;
2008-11-20 23:01:55 +03:00
continue;
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
label->read_failed = B_FALSE;
if (nvlist_unpack(buf, buflen, &config, 0) == 0) {
nvlist_t *vdev_tree = NULL;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
size_t size;
if ((nvlist_lookup_nvlist(config,
ZPOOL_CONFIG_VDEV_TREE, &vdev_tree) != 0) ||
(nvlist_lookup_uint64(vdev_tree,
ZPOOL_CONFIG_ASHIFT, &ashift) != 0))
ashift = SPA_MINBLOCKSHIFT;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
if (nvlist_size(config, &size, NV_ENCODE_XDR) != 0)
size = buflen;
fletcher_4_native_varsize(buf, size, &cksum);
rec = cksum_record_insert(&config_tree, &cksum, l);
label->config = rec;
label->config_nv = config;
config_found = B_TRUE;
} else {
error = B_TRUE;
2008-11-20 23:01:55 +03:00
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
vd.vdev_ashift = ashift;
vd.vdev_top = &vd;
for (int i = 0; i < VDEV_UBERBLOCK_COUNT(&vd); i++) {
uint64_t uoff = VDEV_UBERBLOCK_OFFSET(&vd, i);
uberblock_t *ub = (void *)((char *)label + uoff);
if (uberblock_verify(ub))
continue;
fletcher_4_native_varsize(ub, sizeof (*ub), &cksum);
rec = cksum_record_insert(&uberblock_tree, &cksum, l);
label->uberblocks[i] = rec;
}
}
/*
* Dump the label and uberblocks.
*/
for (int l = 0; l < VDEV_LABELS; l++) {
label_t *label = &labels[l];
size_t buflen = sizeof (label->label.vl_vdev_phys.vp_nvlist);
if (label->read_failed == B_TRUE)
continue;
if (label->config_nv) {
dump_config_from_label(label, buflen, l);
} else {
if (!dump_opt['q'])
(void) printf("failed to unpack label %d\n", l);
}
if (dump_opt['u'])
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
dump_label_uberblocks(label, ashift, l);
nvlist_free(label->config_nv);
2008-11-20 23:01:55 +03:00
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
cookie = NULL;
while ((node = avl_destroy_nodes(&config_tree, &cookie)) != NULL)
umem_free(node, sizeof (cksum_record_t));
cookie = NULL;
while ((node = avl_destroy_nodes(&uberblock_tree, &cookie)) != NULL)
umem_free(node, sizeof (cksum_record_t));
avl_destroy(&config_tree);
avl_destroy(&uberblock_tree);
(void) close(fd);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 03:01:45 +03:00
return (config_found == B_FALSE ? 2 :
(error == B_TRUE ? 1 : 0));
2008-11-20 23:01:55 +03:00
}
static uint64_t dataset_feature_count[SPA_FEATURES];
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static uint64_t remap_deadlist_count = 0;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
static int
dump_one_dir(const char *dsname, void *arg)
2008-11-20 23:01:55 +03:00
{
int error;
objset_t *os;
spa_feature_t f;
2008-11-20 23:01:55 +03:00
error = open_objset(dsname, DMU_OST_ANY, FTAG, &os);
if (error != 0)
2008-11-20 23:01:55 +03:00
return (0);
for (f = 0; f < SPA_FEATURES; f++) {
if (!dsl_dataset_feature_is_active(dmu_objset_ds(os), f))
continue;
ASSERT(spa_feature_table[f].fi_flags &
ZFEATURE_FLAG_PER_DATASET);
dataset_feature_count[f]++;
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (dsl_dataset_remap_deadlist_exists(dmu_objset_ds(os))) {
remap_deadlist_count++;
}
2008-11-20 23:01:55 +03:00
dump_dir(os);
close_objset(os, FTAG);
2008-11-20 23:01:55 +03:00
fuid_table_destroy();
return (0);
}
/*
* Block statistics.
2008-11-20 23:01:55 +03:00
*/
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
#define PSIZE_HISTO_SIZE (SPA_OLD_MAXBLOCKSIZE / SPA_MINBLOCKSIZE + 2)
2008-11-20 23:01:55 +03:00
typedef struct zdb_blkstats {
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
uint64_t zb_asize;
uint64_t zb_lsize;
uint64_t zb_psize;
uint64_t zb_count;
uint64_t zb_gangs;
uint64_t zb_ditto_samevdev;
uint64_t zb_ditto_same_ms;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
uint64_t zb_psize_histogram[PSIZE_HISTO_SIZE];
2008-11-20 23:01:55 +03:00
} zdb_blkstats_t;
/*
* Extended object types to report deferred frees and dedup auto-ditto blocks.
*/
#define ZDB_OT_DEFERRED (DMU_OT_NUMTYPES + 0)
#define ZDB_OT_DITTO (DMU_OT_NUMTYPES + 1)
#define ZDB_OT_OTHER (DMU_OT_NUMTYPES + 2)
#define ZDB_OT_TOTAL (DMU_OT_NUMTYPES + 3)
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static const char *zdb_ot_extname[] = {
"deferred free",
"dedup ditto",
"other",
"Total",
};
2008-11-20 23:01:55 +03:00
#define ZB_TOTAL DN_MAX_LEVELS
2008-11-20 23:01:55 +03:00
typedef struct zdb_cb {
zdb_blkstats_t zcb_type[ZB_TOTAL + 1][ZDB_OT_TOTAL + 1];
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
uint64_t zcb_removing_size;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
uint64_t zcb_checkpoint_size;
uint64_t zcb_dedup_asize;
uint64_t zcb_dedup_blocks;
uint64_t zcb_embedded_blocks[NUM_BP_EMBEDDED_TYPES];
uint64_t zcb_embedded_histogram[NUM_BP_EMBEDDED_TYPES]
[BPE_PAYLOAD_SIZE + 1];
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
uint64_t zcb_start;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
hrtime_t zcb_lastprint;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
uint64_t zcb_totalasize;
2008-11-20 23:01:55 +03:00
uint64_t zcb_errors[256];
int zcb_readfails;
int zcb_haderrors;
spa_t *zcb_spa;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
uint32_t **zcb_vd_obsolete_counts;
2008-11-20 23:01:55 +03:00
} zdb_cb_t;
/* test if two DVA offsets from same vdev are within the same metaslab */
static boolean_t
same_metaslab(spa_t *spa, uint64_t vdev, uint64_t off1, uint64_t off2)
{
vdev_t *vd = vdev_lookup_top(spa, vdev);
uint64_t ms_shift = vd->vdev_ms_shift;
return ((off1 >> ms_shift) == (off2 >> ms_shift));
}
2008-11-20 23:01:55 +03:00
static void
zdb_count_block(zdb_cb_t *zcb, zilog_t *zilog, const blkptr_t *bp,
dmu_object_type_t type)
2008-11-20 23:01:55 +03:00
{
uint64_t refcnt = 0;
int i;
ASSERT(type < ZDB_OT_TOTAL);
if (zilog && zil_bp_tree_add(zilog, bp) != 0)
return;
spa_config_enter(zcb->zcb_spa, SCL_CONFIG, FTAG, RW_READER);
for (i = 0; i < 4; i++) {
2008-11-20 23:01:55 +03:00
int l = (i < 2) ? BP_GET_LEVEL(bp) : ZB_TOTAL;
int t = (i & 1) ? type : ZDB_OT_TOTAL;
int equal;
2008-11-20 23:01:55 +03:00
zdb_blkstats_t *zb = &zcb->zcb_type[l][t];
zb->zb_asize += BP_GET_ASIZE(bp);
zb->zb_lsize += BP_GET_LSIZE(bp);
zb->zb_psize += BP_GET_PSIZE(bp);
zb->zb_count++;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
/*
* The histogram is only big enough to record blocks up to
* SPA_OLD_MAXBLOCKSIZE; larger blocks go into the last,
* "other", bucket.
*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned idx = BP_GET_PSIZE(bp) >> SPA_MINBLOCKSHIFT;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
idx = MIN(idx, SPA_OLD_MAXBLOCKSIZE / SPA_MINBLOCKSIZE + 1);
zb->zb_psize_histogram[idx]++;
zb->zb_gangs += BP_COUNT_GANG(bp);
switch (BP_GET_NDVAS(bp)) {
case 2:
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1])) {
zb->zb_ditto_samevdev++;
if (same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[1])))
zb->zb_ditto_same_ms++;
}
break;
case 3:
equal = (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1])) +
(DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[2])) +
(DVA_GET_VDEV(&bp->blk_dva[1]) ==
DVA_GET_VDEV(&bp->blk_dva[2]));
if (equal != 0) {
zb->zb_ditto_samevdev++;
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[1])))
zb->zb_ditto_same_ms++;
else if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[2]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[2])))
zb->zb_ditto_same_ms++;
else if (DVA_GET_VDEV(&bp->blk_dva[1]) ==
DVA_GET_VDEV(&bp->blk_dva[2]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[1]),
DVA_GET_OFFSET(&bp->blk_dva[1]),
DVA_GET_OFFSET(&bp->blk_dva[2])))
zb->zb_ditto_same_ms++;
}
break;
}
2008-11-20 23:01:55 +03:00
}
spa_config_exit(zcb->zcb_spa, SCL_CONFIG, FTAG);
if (BP_IS_EMBEDDED(bp)) {
zcb->zcb_embedded_blocks[BPE_GET_ETYPE(bp)]++;
zcb->zcb_embedded_histogram[BPE_GET_ETYPE(bp)]
[BPE_GET_PSIZE(bp)]++;
return;
}
if (dump_opt['L'])
return;
if (BP_GET_DEDUP(bp)) {
ddt_t *ddt;
ddt_entry_t *dde;
ddt = ddt_select(zcb->zcb_spa, bp);
ddt_enter(ddt);
dde = ddt_lookup(ddt, bp, B_FALSE);
if (dde == NULL) {
refcnt = 0;
} else {
ddt_phys_t *ddp = ddt_phys_select(dde, bp);
ddt_phys_decref(ddp);
refcnt = ddp->ddp_refcnt;
if (ddt_phys_total_refcnt(dde) == 0)
ddt_remove(ddt, dde);
2008-11-20 23:01:55 +03:00
}
ddt_exit(ddt);
2008-11-20 23:01:55 +03:00
}
VERIFY3U(zio_wait(zio_claim(NULL, zcb->zcb_spa,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
refcnt ? 0 : spa_min_claim_txg(zcb->zcb_spa),
bp, NULL, NULL, ZIO_FLAG_CANFAIL)), ==, 0);
2008-11-20 23:01:55 +03:00
}
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
static void
zdb_blkptr_done(zio_t *zio)
{
spa_t *spa = zio->io_spa;
blkptr_t *bp = zio->io_bp;
int ioerr = zio->io_error;
zdb_cb_t *zcb = zio->io_private;
zbookmark_phys_t *zb = &zio->io_bookmark;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
abd_free(zio->io_abd);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
mutex_enter(&spa->spa_scrub_lock);
spa->spa_load_verify_ios--;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
cv_broadcast(&spa->spa_scrub_io_cv);
if (ioerr && !(zio->io_flags & ZIO_FLAG_SPECULATIVE)) {
char blkbuf[BP_SPRINTF_LEN];
zcb->zcb_haderrors = 1;
zcb->zcb_errors[ioerr]++;
if (dump_opt['b'] >= 2)
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
else
blkbuf[0] = '\0';
(void) printf("zdb_blkptr_cb: "
"Got error %d reading "
"<%llu, %llu, %lld, %llx> %s -- skipping\n",
ioerr,
(u_longlong_t)zb->zb_objset,
(u_longlong_t)zb->zb_object,
(u_longlong_t)zb->zb_level,
(u_longlong_t)zb->zb_blkid,
blkbuf);
}
mutex_exit(&spa->spa_scrub_lock);
}
2008-11-20 23:01:55 +03:00
static int
zdb_blkptr_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
2008-11-20 23:01:55 +03:00
{
zdb_cb_t *zcb = arg;
2009-07-03 02:44:48 +04:00
dmu_object_type_t type;
boolean_t is_metadata;
2008-11-20 23:01:55 +03:00
if (bp == NULL)
return (0);
if (dump_opt['b'] >= 5 && bp->blk_birth > 0) {
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("objset %llu object %llu "
"level %lld offset 0x%llx %s\n",
(u_longlong_t)zb->zb_objset,
(u_longlong_t)zb->zb_object,
(longlong_t)zb->zb_level,
(u_longlong_t)blkid2offset(dnp, bp, zb),
blkbuf);
}
if (BP_IS_HOLE(bp))
return (0);
2009-07-03 02:44:48 +04:00
type = BP_GET_TYPE(bp);
zdb_count_block(zcb, zilog, bp,
(type & DMU_OT_NEWTYPE) ? ZDB_OT_OTHER : type);
is_metadata = (BP_GET_LEVEL(bp) != 0 || DMU_OT_IS_METADATA(type));
if (!BP_IS_EMBEDDED(bp) &&
(dump_opt['c'] > 1 || (dump_opt['c'] && is_metadata))) {
size_t size = BP_GET_PSIZE(bp);
abd_t *abd = abd_alloc(size, B_FALSE);
int flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SCRUB | ZIO_FLAG_RAW;
2009-07-03 02:44:48 +04:00
/* If it's an intent log block, failure is expected. */
if (zb->zb_level == ZB_ZIL_LEVEL)
flags |= ZIO_FLAG_SPECULATIVE;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_load_verify_ios > max_inflight)
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock);
spa->spa_load_verify_ios++;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
mutex_exit(&spa->spa_scrub_lock);
zio_nowait(zio_read(NULL, spa, bp, abd, size,
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
zdb_blkptr_done, zcb, ZIO_PRIORITY_ASYNC_READ, flags, zb));
2008-11-20 23:01:55 +03:00
}
zcb->zcb_readfails = 0;
/* only call gethrtime() every 100 blocks */
static int iters;
if (++iters > 100)
iters = 0;
else
return (0);
if (dump_opt['b'] < 5 && gethrtime() > zcb->zcb_lastprint + NANOSEC) {
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
uint64_t now = gethrtime();
char buf[10];
uint64_t bytes = zcb->zcb_type[ZB_TOTAL][ZDB_OT_TOTAL].zb_asize;
int kb_per_sec =
1 + bytes / (1 + ((now - zcb->zcb_start) / 1000 / 1000));
int sec_remaining =
(zcb->zcb_totalasize - bytes) / 1024 / kb_per_sec;
/* make sure nicenum has enough space */
CTASSERT(sizeof (buf) >= NN_NUMBUF_SZ);
zfs_nicebytes(bytes, buf, sizeof (buf));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
(void) fprintf(stderr,
"\r%5s completed (%4dMB/s) "
"estimated time remaining: %uhr %02umin %02usec ",
buf, kb_per_sec / 1024,
sec_remaining / 60 / 60,
sec_remaining / 60 % 60,
sec_remaining % 60);
zcb->zcb_lastprint = now;
}
2008-11-20 23:01:55 +03:00
return (0);
}
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
zdb_leak(void *arg, uint64_t start, uint64_t size)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
vdev_t *vd = arg;
(void) printf("leaked space: vdev %llu, offset 0x%llx, size %llu\n",
(u_longlong_t)vd->vdev_id, (u_longlong_t)start, (u_longlong_t)size);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
static metaslab_ops_t zdb_metaslab_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
NULL /* alloc */
};
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
/* ARGSUSED */
static void
claim_segment_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
uint64_t size, void *arg)
{
/*
* This callback was called through a remap from
* a device being removed. Therefore, the vdev that
* this callback is applied to is a concrete
* vdev.
*/
ASSERT(vdev_is_concrete(vd));
VERIFY0(metaslab_claim_impl(vd, offset, size,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
spa_min_claim_txg(vd->vdev_spa)));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
static void
claim_segment_cb(void *arg, uint64_t offset, uint64_t size)
{
vdev_t *vd = arg;
vdev_indirect_ops.vdev_op_remap(vd, offset, size,
claim_segment_impl_cb, NULL);
}
/*
* After accounting for all allocated blocks that are directly referenced,
* we might have missed a reference to a block from a partially complete
* (and thus unused) indirect mapping object. We perform a secondary pass
* through the metaslabs we have already mapped and claim the destination
* blocks.
*/
static void
zdb_claim_removing(spa_t *spa, zdb_cb_t *zcb)
{
if (spa->spa_vdev_removal == NULL)
return;
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
spa_vdev_removal_t *svr = spa->spa_vdev_removal;
OpenZFS 9290 - device removal reduces redundancy of mirrors Mirrors are supposed to provide redundancy in the face of whole-disk failure and silent damage (e.g. some data on disk is not right, but ZFS hasn't detected the whole device as being broken). However, the current device removal implementation bypasses some of the mirror's redundancy. Note that in no case is incorrect data returned, but we might get a checksum error when we should have been able to find the right data. There are two underlying problems: 1. When we remove a mirror device, we only read one side of the mirror. Since we can't verify the checksum, this side may be silently bad, but the good data is on the other side of the mirror (which we didn't read). This can cause the removal to "bake in" the busted data – all copies of the data in the new location are the same, busted version, while we left the good version behind. The fix for this is to read and copy both sides of the mirror. If the old and new vdevs are mirrors, we will read both sides of the old mirror, and write each copy to the corresponding side of the new mirror. (If the old and new vdevs have a different number of children, we will do this as best as possible.) Even though we aren't verifying checksums, this ensures that as long as there's a good copy of the data, we'll have a good copy after the removal, even if there's silent damage to one side of the mirror. If we're removing a mirror that has some silent damage, we'll have exactly the same damage in the new location (assuming that the new location is also a mirror). 2. When we read from an indirect vdev that points to a mirror vdev, we only consider one copy of the data. This can lead to reduced effective redundancy, because we might read a bad copy of the data from one side of the mirror, and not retry the other, good side of the mirror. Note that the problem is not with the removal process, but rather after the removal has completed (having copied correct data to both sides of the mirror), if one side of the new mirror is silently damaged, we encounter the problem when reading the relocated data via the indirect vdev. Also note that the problem doesn't occur when ZFS knows that one side of the mirror is bad, e.g. when a disk entirely fails or is offlined. The impact is that reads (from indirect vdevs that point to mirrors) may return a checksum error even though the good data exists on one side of the mirror, and scrub doesn't repair all data on the mirror (if some of it is pointed to via an indirect vdev). The fix for this is complicated by "split blocks" - one logical block may be split into two (or more) pieces with each piece moved to a different new location. In this case we need to read all versions of each split (one from each side of the mirror), and figure out which combination of versions results in the correct checksum, and then repair the incorrect versions. This ensures that we supply the same redundancy whether you use device removal or not. For example, if a mirror has small silent errors on all of its children, we can still reconstruct the correct data, as long as those errors are at sufficiently-separated offsets (specifically, separated by the largest block size - default of 128KB, but up to 16MB). Porting notes: * A new indirect vdev check was moved from dsl_scan_needs_resilver_cb() to dsl_scan_needs_resilver(), which was added to ZoL as part of the sequential scrub work. * Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t parameter. The extra parameter is unique to ZoL. * When posting indirect checksum errors the ABD can be passed directly, zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9290 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591 Closes #6900
2018-02-13 22:37:56 +03:00
vdev_t *vd = vdev_lookup_top(spa, svr->svr_vdev_id);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
for (uint64_t msi = 0; msi < vd->vdev_ms_count; msi++) {
metaslab_t *msp = vd->vdev_ms[msi];
if (msp->ms_start >= vdev_indirect_mapping_max_offset(vim))
break;
ASSERT0(range_tree_space(svr->svr_allocd_segs));
if (msp->ms_sm != NULL) {
VERIFY0(space_map_load(msp->ms_sm,
svr->svr_allocd_segs, SM_ALLOC));
/*
OpenZFS 9290 - device removal reduces redundancy of mirrors Mirrors are supposed to provide redundancy in the face of whole-disk failure and silent damage (e.g. some data on disk is not right, but ZFS hasn't detected the whole device as being broken). However, the current device removal implementation bypasses some of the mirror's redundancy. Note that in no case is incorrect data returned, but we might get a checksum error when we should have been able to find the right data. There are two underlying problems: 1. When we remove a mirror device, we only read one side of the mirror. Since we can't verify the checksum, this side may be silently bad, but the good data is on the other side of the mirror (which we didn't read). This can cause the removal to "bake in" the busted data – all copies of the data in the new location are the same, busted version, while we left the good version behind. The fix for this is to read and copy both sides of the mirror. If the old and new vdevs are mirrors, we will read both sides of the old mirror, and write each copy to the corresponding side of the new mirror. (If the old and new vdevs have a different number of children, we will do this as best as possible.) Even though we aren't verifying checksums, this ensures that as long as there's a good copy of the data, we'll have a good copy after the removal, even if there's silent damage to one side of the mirror. If we're removing a mirror that has some silent damage, we'll have exactly the same damage in the new location (assuming that the new location is also a mirror). 2. When we read from an indirect vdev that points to a mirror vdev, we only consider one copy of the data. This can lead to reduced effective redundancy, because we might read a bad copy of the data from one side of the mirror, and not retry the other, good side of the mirror. Note that the problem is not with the removal process, but rather after the removal has completed (having copied correct data to both sides of the mirror), if one side of the new mirror is silently damaged, we encounter the problem when reading the relocated data via the indirect vdev. Also note that the problem doesn't occur when ZFS knows that one side of the mirror is bad, e.g. when a disk entirely fails or is offlined. The impact is that reads (from indirect vdevs that point to mirrors) may return a checksum error even though the good data exists on one side of the mirror, and scrub doesn't repair all data on the mirror (if some of it is pointed to via an indirect vdev). The fix for this is complicated by "split blocks" - one logical block may be split into two (or more) pieces with each piece moved to a different new location. In this case we need to read all versions of each split (one from each side of the mirror), and figure out which combination of versions results in the correct checksum, and then repair the incorrect versions. This ensures that we supply the same redundancy whether you use device removal or not. For example, if a mirror has small silent errors on all of its children, we can still reconstruct the correct data, as long as those errors are at sufficiently-separated offsets (specifically, separated by the largest block size - default of 128KB, but up to 16MB). Porting notes: * A new indirect vdev check was moved from dsl_scan_needs_resilver_cb() to dsl_scan_needs_resilver(), which was added to ZoL as part of the sequential scrub work. * Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t parameter. The extra parameter is unique to ZoL. * When posting indirect checksum errors the ABD can be passed directly, zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9290 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591 Closes #6900
2018-02-13 22:37:56 +03:00
* Clear everything past what has been synced unless
* it's past the spacemap, because we have not allocated
* mappings for it yet.
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
*/
OpenZFS 9290 - device removal reduces redundancy of mirrors Mirrors are supposed to provide redundancy in the face of whole-disk failure and silent damage (e.g. some data on disk is not right, but ZFS hasn't detected the whole device as being broken). However, the current device removal implementation bypasses some of the mirror's redundancy. Note that in no case is incorrect data returned, but we might get a checksum error when we should have been able to find the right data. There are two underlying problems: 1. When we remove a mirror device, we only read one side of the mirror. Since we can't verify the checksum, this side may be silently bad, but the good data is on the other side of the mirror (which we didn't read). This can cause the removal to "bake in" the busted data – all copies of the data in the new location are the same, busted version, while we left the good version behind. The fix for this is to read and copy both sides of the mirror. If the old and new vdevs are mirrors, we will read both sides of the old mirror, and write each copy to the corresponding side of the new mirror. (If the old and new vdevs have a different number of children, we will do this as best as possible.) Even though we aren't verifying checksums, this ensures that as long as there's a good copy of the data, we'll have a good copy after the removal, even if there's silent damage to one side of the mirror. If we're removing a mirror that has some silent damage, we'll have exactly the same damage in the new location (assuming that the new location is also a mirror). 2. When we read from an indirect vdev that points to a mirror vdev, we only consider one copy of the data. This can lead to reduced effective redundancy, because we might read a bad copy of the data from one side of the mirror, and not retry the other, good side of the mirror. Note that the problem is not with the removal process, but rather after the removal has completed (having copied correct data to both sides of the mirror), if one side of the new mirror is silently damaged, we encounter the problem when reading the relocated data via the indirect vdev. Also note that the problem doesn't occur when ZFS knows that one side of the mirror is bad, e.g. when a disk entirely fails or is offlined. The impact is that reads (from indirect vdevs that point to mirrors) may return a checksum error even though the good data exists on one side of the mirror, and scrub doesn't repair all data on the mirror (if some of it is pointed to via an indirect vdev). The fix for this is complicated by "split blocks" - one logical block may be split into two (or more) pieces with each piece moved to a different new location. In this case we need to read all versions of each split (one from each side of the mirror), and figure out which combination of versions results in the correct checksum, and then repair the incorrect versions. This ensures that we supply the same redundancy whether you use device removal or not. For example, if a mirror has small silent errors on all of its children, we can still reconstruct the correct data, as long as those errors are at sufficiently-separated offsets (specifically, separated by the largest block size - default of 128KB, but up to 16MB). Porting notes: * A new indirect vdev check was moved from dsl_scan_needs_resilver_cb() to dsl_scan_needs_resilver(), which was added to ZoL as part of the sequential scrub work. * Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t parameter. The extra parameter is unique to ZoL. * When posting indirect checksum errors the ABD can be passed directly, zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9290 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591 Closes #6900
2018-02-13 22:37:56 +03:00
uint64_t vim_max_offset =
vdev_indirect_mapping_max_offset(vim);
uint64_t sm_end = msp->ms_sm->sm_start +
msp->ms_sm->sm_size;
if (sm_end > vim_max_offset)
range_tree_clear(svr->svr_allocd_segs,
vim_max_offset, sm_end - vim_max_offset);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
zcb->zcb_removing_size +=
range_tree_space(svr->svr_allocd_segs);
range_tree_vacate(svr->svr_allocd_segs, claim_segment_cb, vd);
}
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
/* ARGSUSED */
static int
increment_indirect_mapping_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
zdb_cb_t *zcb = arg;
spa_t *spa = zcb->zcb_spa;
vdev_t *vd;
const dva_t *dva = &bp->blk_dva[0];
ASSERT(!dump_opt['L']);
ASSERT3U(BP_GET_NDVAS(bp), ==, 1);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
vd = vdev_lookup_top(zcb->zcb_spa, DVA_GET_VDEV(dva));
ASSERT3P(vd, !=, NULL);
spa_config_exit(spa, SCL_VDEV, FTAG);
ASSERT(vd->vdev_indirect_config.vic_mapping_object != 0);
ASSERT3P(zcb->zcb_vd_obsolete_counts[vd->vdev_id], !=, NULL);
vdev_indirect_mapping_increment_obsolete_count(
vd->vdev_indirect_mapping,
DVA_GET_OFFSET(dva), DVA_GET_ASIZE(dva),
zcb->zcb_vd_obsolete_counts[vd->vdev_id]);
return (0);
}
static uint32_t *
zdb_load_obsolete_counts(vdev_t *vd)
{
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
spa_t *spa = vd->vdev_spa;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
uint64_t obsolete_sm_object;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
uint32_t *counts;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
EQUIV(obsolete_sm_object != 0, vd->vdev_obsolete_sm != NULL);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
counts = vdev_indirect_mapping_load_obsolete_counts(vim);
if (vd->vdev_obsolete_sm != NULL) {
vdev_indirect_mapping_load_obsolete_spacemap(vim, counts,
vd->vdev_obsolete_sm);
}
if (scip->scip_vdev == vd->vdev_id &&
scip->scip_prev_obsolete_sm_object != 0) {
space_map_t *prev_obsolete_sm = NULL;
VERIFY0(space_map_open(&prev_obsolete_sm, spa->spa_meta_objset,
scip->scip_prev_obsolete_sm_object, 0, vd->vdev_asize, 0));
space_map_update(prev_obsolete_sm);
vdev_indirect_mapping_load_obsolete_spacemap(vim, counts,
prev_obsolete_sm);
space_map_close(prev_obsolete_sm);
}
return (counts);
}
static void
zdb_ddt_leak_init(spa_t *spa, zdb_cb_t *zcb)
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
ddt_bookmark_t ddb;
ddt_entry_t dde;
int error;
int p;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
bzero(&ddb, sizeof (ddb));
while ((error = ddt_walk(spa, &ddb, &dde)) == 0) {
blkptr_t blk;
ddt_phys_t *ddp = dde.dde_phys;
if (ddb.ddb_class == DDT_CLASS_UNIQUE)
return;
ASSERT(ddt_phys_total_refcnt(&dde) > 1);
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (ddp->ddp_phys_birth == 0)
continue;
ddt_bp_create(ddb.ddb_checksum,
&dde.dde_key, ddp, &blk);
if (p == DDT_PHYS_DITTO) {
zdb_count_block(zcb, NULL, &blk, ZDB_OT_DITTO);
} else {
zcb->zcb_dedup_asize +=
BP_GET_ASIZE(&blk) * (ddp->ddp_refcnt - 1);
zcb->zcb_dedup_blocks++;
}
}
if (!dump_opt['L']) {
ddt_t *ddt = spa->spa_ddt[ddb.ddb_checksum];
ddt_enter(ddt);
VERIFY(ddt_lookup(ddt, &blk, B_TRUE) != NULL);
ddt_exit(ddt);
}
}
ASSERT(error == ENOENT);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
typedef struct checkpoint_sm_exclude_entry_arg {
vdev_t *cseea_vd;
uint64_t cseea_checkpoint_size;
} checkpoint_sm_exclude_entry_arg_t;
static int
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
checkpoint_sm_exclude_entry_cb(space_map_entry_t *sme, void *arg)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
{
checkpoint_sm_exclude_entry_arg_t *cseea = arg;
vdev_t *vd = cseea->cseea_vd;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
metaslab_t *ms = vd->vdev_ms[sme->sme_offset >> vd->vdev_ms_shift];
uint64_t end = sme->sme_offset + sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
ASSERT(sme->sme_type == SM_FREE);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/*
* Since the vdev_checkpoint_sm exists in the vdev level
* and the ms_sm space maps exist in the metaslab level,
* an entry in the checkpoint space map could theoretically
* cross the boundaries of the metaslab that it belongs.
*
* In reality, because of the way that we populate and
* manipulate the checkpoint's space maps currently,
* there shouldn't be any entries that cross metaslabs.
* Hence the assertion below.
*
* That said, there is no fundamental requirement that
* the checkpoint's space map entries should not cross
* metaslab boundaries. So if needed we could add code
* that handles metaslab-crossing segments in the future.
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
VERIFY3U(sme->sme_offset, >=, ms->ms_start);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
VERIFY3U(end, <=, ms->ms_start + ms->ms_size);
/*
* By removing the entry from the allocated segments we
* also verify that the entry is there to begin with.
*/
mutex_enter(&ms->ms_lock);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
range_tree_remove(ms->ms_allocatable, sme->sme_offset, sme->sme_run);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
mutex_exit(&ms->ms_lock);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
cseea->cseea_checkpoint_size += sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
return (0);
}
static void
zdb_leak_init_vdev_exclude_checkpoint(vdev_t *vd, zdb_cb_t *zcb)
{
spa_t *spa = vd->vdev_spa;
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
/*
* If there is no vdev_top_zap, we are in a pool whose
* version predates the pool checkpoint feature.
*/
if (vd->vdev_top_zap == 0)
return;
/*
* If there is no reference of the vdev_checkpoint_sm in
* the vdev_top_zap, then one of the following scenarios
* is true:
*
* 1] There is no checkpoint
* 2] There is a checkpoint, but no checkpointed blocks
* have been freed yet
* 3] The current vdev is indirect
*
* In these cases we return immediately.
*/
if (zap_contains(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
return;
VERIFY0(zap_lookup(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM, sizeof (uint64_t), 1,
&checkpoint_sm_obj));
checkpoint_sm_exclude_entry_arg_t cseea;
cseea.cseea_vd = vd;
cseea.cseea_checkpoint_size = 0;
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(spa),
checkpoint_sm_obj, 0, vd->vdev_asize, vd->vdev_ashift));
space_map_update(checkpoint_sm);
VERIFY0(space_map_iterate(checkpoint_sm,
checkpoint_sm_exclude_entry_cb, &cseea));
space_map_close(checkpoint_sm);
zcb->zcb_checkpoint_size += cseea.cseea_checkpoint_size;
}
static void
zdb_leak_init_exclude_checkpoint(spa_t *spa, zdb_cb_t *zcb)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t c = 0; c < rvd->vdev_children; c++) {
ASSERT3U(c, ==, rvd->vdev_child[c]->vdev_id);
zdb_leak_init_vdev_exclude_checkpoint(rvd->vdev_child[c], zcb);
}
}
static void
load_concrete_ms_allocatable_trees(spa_t *spa, maptype_t maptype)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t i = 0; i < rvd->vdev_children; i++) {
vdev_t *vd = rvd->vdev_child[i];
ASSERT3U(i, ==, vd->vdev_id);
if (vd->vdev_ops == &vdev_indirect_ops)
continue;
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
(void) fprintf(stderr,
"\rloading concrete vdev %llu, "
"metaslab %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)msp->ms_id,
(longlong_t)vd->vdev_ms_count);
mutex_enter(&msp->ms_lock);
metaslab_unload(msp);
/*
* We don't want to spend the CPU manipulating the
* size-ordered tree, so clear the range_tree ops.
*/
msp->ms_allocatable->rt_ops = NULL;
if (msp->ms_sm != NULL) {
VERIFY0(space_map_load(msp->ms_sm,
msp->ms_allocatable, maptype));
}
if (!msp->ms_loaded)
msp->ms_loaded = B_TRUE;
mutex_exit(&msp->ms_lock);
}
}
}
/*
* vm_idxp is an in-out parameter which (for indirect vdevs) is the
* index in vim_entries that has the first entry in this metaslab.
* On return, it will be set to the first entry after this metaslab.
*/
static void
load_indirect_ms_allocatable_tree(vdev_t *vd, metaslab_t *msp,
uint64_t *vim_idxp)
{
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
mutex_enter(&msp->ms_lock);
metaslab_unload(msp);
/*
* We don't want to spend the CPU manipulating the
* size-ordered tree, so clear the range_tree ops.
*/
msp->ms_allocatable->rt_ops = NULL;
for (; *vim_idxp < vdev_indirect_mapping_num_entries(vim);
(*vim_idxp)++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[*vim_idxp];
uint64_t ent_offset = DVA_MAPPING_GET_SRC_OFFSET(vimep);
uint64_t ent_len = DVA_GET_ASIZE(&vimep->vimep_dst);
ASSERT3U(ent_offset, >=, msp->ms_start);
if (ent_offset >= msp->ms_start + msp->ms_size)
break;
/*
* Mappings do not cross metaslab boundaries,
* because we create them by walking the metaslabs.
*/
ASSERT3U(ent_offset + ent_len, <=,
msp->ms_start + msp->ms_size);
range_tree_add(msp->ms_allocatable, ent_offset, ent_len);
}
if (!msp->ms_loaded)
msp->ms_loaded = B_TRUE;
mutex_exit(&msp->ms_lock);
}
static void
zdb_leak_init_prepare_indirect_vdevs(spa_t *spa, zdb_cb_t *zcb)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
ASSERT3U(c, ==, vd->vdev_id);
if (vd->vdev_ops != &vdev_indirect_ops)
continue;
/*
* Note: we don't check for mapping leaks on
* removing vdevs because their ms_allocatable's
* are used to look for leaks in allocated space.
*/
zcb->zcb_vd_obsolete_counts[c] = zdb_load_obsolete_counts(vd);
/*
* Normally, indirect vdevs don't have any
* metaslabs. We want to set them up for
* zio_claim().
*/
VERIFY0(vdev_metaslab_init(vd, 0));
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
uint64_t vim_idx = 0;
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
(void) fprintf(stderr,
"\rloading indirect vdev %llu, "
"metaslab %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)vd->vdev_ms[m]->ms_id,
(longlong_t)vd->vdev_ms_count);
load_indirect_ms_allocatable_tree(vd, vd->vdev_ms[m],
&vim_idx);
}
ASSERT3U(vim_idx, ==, vdev_indirect_mapping_num_entries(vim));
}
}
static void
zdb_leak_init(spa_t *spa, zdb_cb_t *zcb)
{
zcb->zcb_spa = spa;
if (!dump_opt['L']) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dsl_pool_t *dp = spa->spa_dsl_pool;
vdev_t *rvd = spa->spa_root_vdev;
/*
* We are going to be changing the meaning of the metaslab's
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
* ms_allocatable. Ensure that the allocator doesn't try to
* use the tree.
*/
spa->spa_normal_class->mc_ops = &zdb_metaslab_ops;
spa->spa_log_class->mc_ops = &zdb_metaslab_ops;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
zcb->zcb_vd_obsolete_counts =
umem_zalloc(rvd->vdev_children * sizeof (uint32_t *),
UMEM_NOFAIL);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/*
* For leak detection, we overload the ms_allocatable trees
* to contain allocated segments instead of free segments.
* As a result, we can't use the normal metaslab_load/unload
* interfaces.
*/
zdb_leak_init_prepare_indirect_vdevs(spa, zcb);
load_concrete_ms_allocatable_trees(spa, SM_ALLOC);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/*
* On load_concrete_ms_allocatable_trees() we loaded all the
* allocated entries from the ms_sm to the ms_allocatable for
* each metaslab. If the pool has a checkpoint or is in the
* middle of discarding a checkpoint, some of these blocks
* may have been freed but their ms_sm may not have been
* updated because they are referenced by the checkpoint. In
* order to avoid false-positives during leak-detection, we
* go through the vdev's checkpoint space map and exclude all
* its entries from their relevant ms_allocatable.
*
* We also aggregate the space held by the checkpoint and add
* it to zcb_checkpoint_size.
*
* Note that at this point we are also verifying that all the
* entries on the checkpoint_sm are marked as allocated in
* the ms_sm of their relevant metaslab.
* [see comment in checkpoint_sm_exclude_entry_cb()]
*/
zdb_leak_init_exclude_checkpoint(spa, zcb);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (bpobj_is_open(&dp->dp_obsolete_bpobj)) {
ASSERT(spa_feature_is_enabled(spa,
SPA_FEATURE_DEVICE_REMOVAL));
(void) bpobj_iterate_nofree(&dp->dp_obsolete_bpobj,
increment_indirect_mapping_cb, zcb, NULL);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
} else {
/*
* If leak tracing is disabled, we still need to consider
* any checkpointed space in our space verification.
*/
zcb->zcb_checkpoint_size += spa_get_checkpoint_space(spa);
}
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
zdb_ddt_leak_init(spa, zcb);
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static boolean_t
zdb_check_for_obsolete_leaks(vdev_t *vd, zdb_cb_t *zcb)
{
boolean_t leaks = B_FALSE;
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
uint64_t total_leaked = 0;
boolean_t are_precise = B_FALSE;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ASSERT(vim != NULL);
for (uint64_t i = 0; i < vdev_indirect_mapping_num_entries(vim); i++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[i];
uint64_t obsolete_bytes = 0;
uint64_t offset = DVA_MAPPING_GET_SRC_OFFSET(vimep);
metaslab_t *msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
/*
* This is not very efficient but it's easy to
* verify correctness.
*/
for (uint64_t inner_offset = 0;
inner_offset < DVA_GET_ASIZE(&vimep->vimep_dst);
inner_offset += 1 << vd->vdev_ashift) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if (range_tree_contains(msp->ms_allocatable,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
offset + inner_offset, 1 << vd->vdev_ashift)) {
obsolete_bytes += 1 << vd->vdev_ashift;
}
}
int64_t bytes_leaked = obsolete_bytes -
zcb->zcb_vd_obsolete_counts[vd->vdev_id][i];
ASSERT3U(DVA_GET_ASIZE(&vimep->vimep_dst), >=,
zcb->zcb_vd_obsolete_counts[vd->vdev_id][i]);
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (bytes_leaked != 0 && (are_precise || dump_opt['d'] >= 5)) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
(void) printf("obsolete indirect mapping count "
"mismatch on %llu:%llx:%llx : %llx bytes leaked\n",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)DVA_MAPPING_GET_SRC_OFFSET(vimep),
(u_longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
(u_longlong_t)bytes_leaked);
}
total_leaked += ABS(bytes_leaked);
}
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (!are_precise && total_leaked > 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
int pct_leaked = total_leaked * 100 /
vdev_indirect_mapping_bytes_mapped(vim);
(void) printf("cannot verify obsolete indirect mapping "
"counts of vdev %llu because precise feature was not "
"enabled when it was removed: %d%% (%llx bytes) of mapping"
"unreferenced\n",
(u_longlong_t)vd->vdev_id, pct_leaked,
(u_longlong_t)total_leaked);
} else if (total_leaked > 0) {
(void) printf("obsolete indirect mapping count mismatch "
"for vdev %llu -- %llx total bytes mismatched\n",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)total_leaked);
leaks |= B_TRUE;
}
vdev_indirect_mapping_free_obsolete_counts(vim,
zcb->zcb_vd_obsolete_counts[vd->vdev_id]);
zcb->zcb_vd_obsolete_counts[vd->vdev_id] = NULL;
return (leaks);
}
static boolean_t
zdb_leak_fini(spa_t *spa, zdb_cb_t *zcb)
{
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
boolean_t leaks = B_FALSE;
if (!dump_opt['L']) {
vdev_t *rvd = spa->spa_root_vdev;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
ASSERTV(metaslab_group_t *mg = vd->vdev_mg);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (zcb->zcb_vd_obsolete_counts[c] != NULL) {
leaks |= zdb_check_for_obsolete_leaks(vd, zcb);
}
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
ASSERT3P(mg, ==, msp->ms_group);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
/*
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
* ms_allocatable has been overloaded
* to contain allocated segments. Now that
* we finished traversing all blocks, any
* block that remains in the ms_allocatable
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
* represents an allocated block that we
* did not claim during the traversal.
* Claimed blocks would have been removed
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
* from the ms_allocatable. For indirect
* vdevs, space remaining in the tree
* represents parts of the mapping that are
* not referenced, which is not a bug.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
*/
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (vd->vdev_ops == &vdev_indirect_ops) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
range_tree_vacate(msp->ms_allocatable,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
NULL, NULL);
} else {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
range_tree_vacate(msp->ms_allocatable,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
zdb_leak, vd);
}
if (msp->ms_loaded)
msp->ms_loaded = B_FALSE;
}
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
umem_free(zcb->zcb_vd_obsolete_counts,
rvd->vdev_children * sizeof (uint32_t *));
zcb->zcb_vd_obsolete_counts = NULL;
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
return (leaks);
}
/* ARGSUSED */
static int
count_block_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
zdb_cb_t *zcb = arg;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
if (dump_opt['b'] >= 5) {
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("[%s] %s\n",
"deferred free", blkbuf);
}
zdb_count_block(zcb, NULL, bp, ZDB_OT_DEFERRED);
return (0);
}
2008-11-20 23:01:55 +03:00
static int
dump_block_stats(spa_t *spa)
{
zdb_cb_t zcb;
2008-11-20 23:01:55 +03:00
zdb_blkstats_t *zb, *tzb;
uint64_t norm_alloc, norm_space, total_alloc, total_found;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
int flags = TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA |
TRAVERSE_NO_DECRYPT | TRAVERSE_HARD;
boolean_t leaks = B_FALSE;
int e, c, err;
bp_embedded_type_t i;
2008-11-20 23:01:55 +03:00
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
bzero(&zcb, sizeof (zcb));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
(void) printf("\nTraversing all blocks %s%s%s%s%s...\n\n",
(dump_opt['c'] || !dump_opt['L']) ? "to verify " : "",
(dump_opt['c'] == 1) ? "metadata " : "",
dump_opt['c'] ? "checksums " : "",
(dump_opt['c'] && !dump_opt['L']) ? "and verify " : "",
!dump_opt['L'] ? "nothing leaked " : "");
2008-11-20 23:01:55 +03:00
/*
* Load all space maps as SM_ALLOC maps, then traverse the pool
* claiming each block we discover. If the pool is perfectly
* consistent, the space maps will be empty when we're done.
* Anything left over is a leak; any block we can't claim (because
* it's not part of any space map) is a double allocation,
* reference to a freed block, or an unclaimed log block.
2008-11-20 23:01:55 +03:00
*/
bzero(&zcb, sizeof (zdb_cb_t));
zdb_leak_init(spa, &zcb);
2008-11-20 23:01:55 +03:00
/*
* If there's a deferred-free bplist, process that first.
*/
(void) bpobj_iterate_nofree(&spa->spa_deferred_bpobj,
count_block_cb, &zcb, NULL);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (spa_version(spa) >= SPA_VERSION_DEADLISTS) {
(void) bpobj_iterate_nofree(&spa->spa_dsl_pool->dp_free_bpobj,
count_block_cb, &zcb, NULL);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
zdb_claim_removing(spa, &zcb);
if (spa_feature_is_active(spa, SPA_FEATURE_ASYNC_DESTROY)) {
VERIFY3U(0, ==, bptree_iterate(spa->spa_meta_objset,
spa->spa_dsl_pool->dp_bptree_obj, B_FALSE, count_block_cb,
&zcb, NULL));
}
2008-11-20 23:01:55 +03:00
if (dump_opt['c'] > 1)
flags |= TRAVERSE_PREFETCH_DATA;
2008-11-20 23:01:55 +03:00
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
zcb.zcb_totalasize = metaslab_class_get_alloc(spa_normal_class(spa));
zcb.zcb_totalasize += metaslab_class_get_alloc(spa_special_class(spa));
zcb.zcb_totalasize += metaslab_class_get_alloc(spa_dedup_class(spa));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
zcb.zcb_start = zcb.zcb_lastprint = gethrtime();
err = traverse_pool(spa, 0, flags, zdb_blkptr_cb, &zcb);
2008-11-20 23:01:55 +03:00
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
/*
* If we've traversed the data blocks then we need to wait for those
* I/Os to complete. We leverage "The Godfather" zio to wait on
* all async I/Os to complete.
*/
if (dump_opt['c']) {
for (c = 0; c < max_ncpus; c++) {
(void) zio_wait(spa->spa_async_zio_root[c]);
spa->spa_async_zio_root[c] = zio_root(spa, NULL, NULL,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE |
ZIO_FLAG_GODFATHER);
}
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
}
/*
* Done after zio_wait() since zcb_haderrors is modified in
* zdb_blkptr_done()
*/
zcb.zcb_haderrors |= err;
if (zcb.zcb_haderrors) {
2008-11-20 23:01:55 +03:00
(void) printf("\nError counts:\n\n");
(void) printf("\t%5s %s\n", "errno", "count");
for (e = 0; e < 256; e++) {
2008-11-20 23:01:55 +03:00
if (zcb.zcb_errors[e] != 0) {
(void) printf("\t%5d %llu\n",
e, (u_longlong_t)zcb.zcb_errors[e]);
}
}
}
/*
* Report any leaked segments.
*/
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
leaks |= zdb_leak_fini(spa, &zcb);
2008-11-20 23:01:55 +03:00
tzb = &zcb.zcb_type[ZB_TOTAL][ZDB_OT_TOTAL];
2008-11-20 23:01:55 +03:00
norm_alloc = metaslab_class_get_alloc(spa_normal_class(spa));
norm_space = metaslab_class_get_space(spa_normal_class(spa));
2008-11-20 23:01:55 +03:00
total_alloc = norm_alloc +
metaslab_class_get_alloc(spa_log_class(spa)) +
metaslab_class_get_alloc(spa_special_class(spa)) +
metaslab_class_get_alloc(spa_dedup_class(spa));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
total_found = tzb->zb_asize - zcb.zcb_dedup_asize +
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
zcb.zcb_removing_size + zcb.zcb_checkpoint_size;
2008-11-20 23:01:55 +03:00
if (total_found == total_alloc) {
2009-01-16 00:59:39 +03:00
if (!dump_opt['L'])
(void) printf("\n\tNo leaks (block sum matches space"
" maps exactly)\n");
2008-11-20 23:01:55 +03:00
} else {
(void) printf("block traversal size %llu != alloc %llu "
2009-01-16 00:59:39 +03:00
"(%s %lld)\n",
(u_longlong_t)total_found,
(u_longlong_t)total_alloc,
2009-01-16 00:59:39 +03:00
(dump_opt['L']) ? "unreachable" : "leaked",
(longlong_t)(total_alloc - total_found));
leaks = B_TRUE;
2008-11-20 23:01:55 +03:00
}
if (tzb->zb_count == 0)
return (2);
(void) printf("\n");
(void) printf("\t%-16s %14llu\n", "bp count:",
2008-11-20 23:01:55 +03:00
(u_longlong_t)tzb->zb_count);
(void) printf("\t%-16s %14llu\n", "ganged count:",
(longlong_t)tzb->zb_gangs);
(void) printf("\t%-16s %14llu avg: %6llu\n", "bp logical:",
2008-11-20 23:01:55 +03:00
(u_longlong_t)tzb->zb_lsize,
(u_longlong_t)(tzb->zb_lsize / tzb->zb_count));
(void) printf("\t%-16s %14llu avg: %6llu compression: %6.2f\n",
"bp physical:", (u_longlong_t)tzb->zb_psize,
2008-11-20 23:01:55 +03:00
(u_longlong_t)(tzb->zb_psize / tzb->zb_count),
(double)tzb->zb_lsize / tzb->zb_psize);
(void) printf("\t%-16s %14llu avg: %6llu compression: %6.2f\n",
"bp allocated:", (u_longlong_t)tzb->zb_asize,
2008-11-20 23:01:55 +03:00
(u_longlong_t)(tzb->zb_asize / tzb->zb_count),
(double)tzb->zb_lsize / tzb->zb_asize);
(void) printf("\t%-16s %14llu ref>1: %6llu deduplication: %6.2f\n",
"bp deduped:", (u_longlong_t)zcb.zcb_dedup_asize,
(u_longlong_t)zcb.zcb_dedup_blocks,
(double)zcb.zcb_dedup_asize / tzb->zb_asize + 1.0);
(void) printf("\t%-16s %14llu used: %5.2f%%\n", "Normal class:",
(u_longlong_t)norm_alloc, 100.0 * norm_alloc / norm_space);
2008-11-20 23:01:55 +03:00
if (spa_special_class(spa)->mc_rotor != NULL) {
uint64_t alloc = metaslab_class_get_alloc(
spa_special_class(spa));
uint64_t space = metaslab_class_get_space(
spa_special_class(spa));
(void) printf("\t%-16s %14llu used: %5.2f%%\n",
"Special class", (u_longlong_t)alloc,
100.0 * alloc / space);
}
if (spa_dedup_class(spa)->mc_rotor != NULL) {
uint64_t alloc = metaslab_class_get_alloc(
spa_dedup_class(spa));
uint64_t space = metaslab_class_get_space(
spa_dedup_class(spa));
(void) printf("\t%-16s %14llu used: %5.2f%%\n",
"Dedup class", (u_longlong_t)alloc,
100.0 * alloc / space);
}
for (i = 0; i < NUM_BP_EMBEDDED_TYPES; i++) {
if (zcb.zcb_embedded_blocks[i] == 0)
continue;
(void) printf("\n");
(void) printf("\tadditional, non-pointer bps of type %u: "
"%10llu\n",
i, (u_longlong_t)zcb.zcb_embedded_blocks[i]);
if (dump_opt['b'] >= 3) {
(void) printf("\t number of (compressed) bytes: "
"number of bps\n");
dump_histogram(zcb.zcb_embedded_histogram[i],
sizeof (zcb.zcb_embedded_histogram[i]) /
sizeof (zcb.zcb_embedded_histogram[i][0]), 0);
}
}
if (tzb->zb_ditto_samevdev != 0) {
(void) printf("\tDittoed blocks on same vdev: %llu\n",
(longlong_t)tzb->zb_ditto_samevdev);
}
if (tzb->zb_ditto_same_ms != 0) {
(void) printf("\tDittoed blocks in same metaslab: %llu\n",
(longlong_t)tzb->zb_ditto_same_ms);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
for (uint64_t v = 0; v < spa->spa_root_vdev->vdev_children; v++) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[v];
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
if (vim == NULL) {
continue;
}
char mem[32];
zdb_nicenum(vdev_indirect_mapping_num_entries(vim),
mem, vdev_indirect_mapping_size(vim));
(void) printf("\tindirect vdev id %llu has %llu segments "
"(%s in memory)\n",
(longlong_t)vd->vdev_id,
(longlong_t)vdev_indirect_mapping_num_entries(vim), mem);
}
2008-11-20 23:01:55 +03:00
if (dump_opt['b'] >= 2) {
int l, t, level;
(void) printf("\nBlocks\tLSIZE\tPSIZE\tASIZE"
"\t avg\t comp\t%%Total\tType\n");
for (t = 0; t <= ZDB_OT_TOTAL; t++) {
char csize[32], lsize[32], psize[32], asize[32];
char avg[32], gang[32];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *typename;
2008-11-20 23:01:55 +03:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (csize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (lsize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (psize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (asize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (avg) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (gang) >= NN_NUMBUF_SZ);
if (t < DMU_OT_NUMTYPES)
typename = dmu_ot[t].ot_name;
else
typename = zdb_ot_extname[t - DMU_OT_NUMTYPES];
2008-11-20 23:01:55 +03:00
if (zcb.zcb_type[ZB_TOTAL][t].zb_asize == 0) {
(void) printf("%6s\t%5s\t%5s\t%5s"
"\t%5s\t%5s\t%6s\t%s\n",
"-",
"-",
"-",
"-",
"-",
"-",
"-",
typename);
continue;
}
for (l = ZB_TOTAL - 1; l >= -1; l--) {
level = (l == -1 ? ZB_TOTAL : l);
zb = &zcb.zcb_type[level][t];
if (zb->zb_asize == 0)
continue;
if (dump_opt['b'] < 3 && level != ZB_TOTAL)
continue;
if (level == 0 && zb->zb_asize ==
zcb.zcb_type[ZB_TOTAL][t].zb_asize)
continue;
zdb_nicenum(zb->zb_count, csize,
sizeof (csize));
zdb_nicenum(zb->zb_lsize, lsize,
sizeof (lsize));
zdb_nicenum(zb->zb_psize, psize,
sizeof (psize));
zdb_nicenum(zb->zb_asize, asize,
sizeof (asize));
zdb_nicenum(zb->zb_asize / zb->zb_count, avg,
sizeof (avg));
zdb_nicenum(zb->zb_gangs, gang, sizeof (gang));
2008-11-20 23:01:55 +03:00
(void) printf("%6s\t%5s\t%5s\t%5s\t%5s"
"\t%5.2f\t%6.2f\t",
csize, lsize, psize, asize, avg,
(double)zb->zb_lsize / zb->zb_psize,
100.0 * zb->zb_asize / tzb->zb_asize);
if (level == ZB_TOTAL)
(void) printf("%s\n", typename);
else
(void) printf(" L%d %s\n",
level, typename);
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
if (dump_opt['b'] >= 3 && zb->zb_gangs > 0) {
(void) printf("\t number of ganged "
"blocks: %s\n", gang);
}
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
if (dump_opt['b'] >= 4) {
(void) printf("psize "
"(in 512-byte sectors): "
"number of blocks\n");
dump_histogram(zb->zb_psize_histogram,
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
PSIZE_HISTO_SIZE, 0);
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-25 01:24:51 +04:00
}
2008-11-20 23:01:55 +03:00
}
}
}
(void) printf("\n");
if (leaks)
return (2);
if (zcb.zcb_haderrors)
return (3);
return (0);
}
typedef struct zdb_ddt_entry {
ddt_key_t zdde_key;
uint64_t zdde_ref_blocks;
uint64_t zdde_ref_lsize;
uint64_t zdde_ref_psize;
uint64_t zdde_ref_dsize;
avl_node_t zdde_node;
} zdb_ddt_entry_t;
/* ARGSUSED */
static int
zdb_ddt_add_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
{
avl_tree_t *t = arg;
avl_index_t where;
zdb_ddt_entry_t *zdde, zdde_search;
if (bp == NULL || BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp))
return (0);
if (dump_opt['S'] > 1 && zb->zb_level == ZB_ROOT_LEVEL) {
(void) printf("traversing objset %llu, %llu objects, "
"%lu blocks so far\n",
(u_longlong_t)zb->zb_objset,
(u_longlong_t)BP_GET_FILL(bp),
avl_numnodes(t));
}
if (BP_IS_HOLE(bp) || BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_OFF ||
BP_GET_LEVEL(bp) > 0 || DMU_OT_IS_METADATA(BP_GET_TYPE(bp)))
return (0);
ddt_key_fill(&zdde_search.zdde_key, bp);
zdde = avl_find(t, &zdde_search, &where);
if (zdde == NULL) {
zdde = umem_zalloc(sizeof (*zdde), UMEM_NOFAIL);
zdde->zdde_key = zdde_search.zdde_key;
avl_insert(t, zdde, where);
}
zdde->zdde_ref_blocks += 1;
zdde->zdde_ref_lsize += BP_GET_LSIZE(bp);
zdde->zdde_ref_psize += BP_GET_PSIZE(bp);
zdde->zdde_ref_dsize += bp_get_dsize_sync(spa, bp);
return (0);
}
static void
dump_simulated_ddt(spa_t *spa)
{
avl_tree_t t;
void *cookie = NULL;
zdb_ddt_entry_t *zdde;
ddt_histogram_t ddh_total;
ddt_stat_t dds_total;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
bzero(&ddh_total, sizeof (ddh_total));
bzero(&dds_total, sizeof (dds_total));
avl_create(&t, ddt_entry_compare,
sizeof (zdb_ddt_entry_t), offsetof(zdb_ddt_entry_t, zdde_node));
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) traverse_pool(spa, 0, TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA |
TRAVERSE_NO_DECRYPT, zdb_ddt_add_cb, &t);
spa_config_exit(spa, SCL_CONFIG, FTAG);
while ((zdde = avl_destroy_nodes(&t, &cookie)) != NULL) {
ddt_stat_t dds;
uint64_t refcnt = zdde->zdde_ref_blocks;
ASSERT(refcnt != 0);
dds.dds_blocks = zdde->zdde_ref_blocks / refcnt;
dds.dds_lsize = zdde->zdde_ref_lsize / refcnt;
dds.dds_psize = zdde->zdde_ref_psize / refcnt;
dds.dds_dsize = zdde->zdde_ref_dsize / refcnt;
dds.dds_ref_blocks = zdde->zdde_ref_blocks;
dds.dds_ref_lsize = zdde->zdde_ref_lsize;
dds.dds_ref_psize = zdde->zdde_ref_psize;
dds.dds_ref_dsize = zdde->zdde_ref_dsize;
ddt_stat_add(&ddh_total.ddh_stat[highbit64(refcnt) - 1],
&dds, 0);
umem_free(zdde, sizeof (*zdde));
}
avl_destroy(&t);
ddt_histogram_stat(&dds_total, &ddh_total);
(void) printf("Simulated DDT histogram:\n");
zpool_dump_ddt(&dds_total, &ddh_total);
dump_dedup_ratio(&dds_total);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
static int
verify_device_removal_feature_counts(spa_t *spa)
{
uint64_t dr_feature_refcount = 0;
uint64_t oc_feature_refcount = 0;
uint64_t indirect_vdev_count = 0;
uint64_t precise_vdev_count = 0;
uint64_t obsolete_counts_object_count = 0;
uint64_t obsolete_sm_count = 0;
uint64_t obsolete_counts_count = 0;
uint64_t scip_count = 0;
uint64_t obsolete_bpobj_count = 0;
int ret = 0;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
if (scip->scip_next_mapping_object != 0) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[scip->scip_vdev];
ASSERT(scip->scip_prev_obsolete_sm_object != 0);
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
(void) printf("Condensing indirect vdev %llu: new mapping "
"object %llu, prev obsolete sm %llu\n",
(u_longlong_t)scip->scip_vdev,
(u_longlong_t)scip->scip_next_mapping_object,
(u_longlong_t)scip->scip_prev_obsolete_sm_object);
if (scip->scip_prev_obsolete_sm_object != 0) {
space_map_t *prev_obsolete_sm = NULL;
VERIFY0(space_map_open(&prev_obsolete_sm,
spa->spa_meta_objset,
scip->scip_prev_obsolete_sm_object,
0, vd->vdev_asize, 0));
space_map_update(prev_obsolete_sm);
dump_spacemap(spa->spa_meta_objset, prev_obsolete_sm);
(void) printf("\n");
space_map_close(prev_obsolete_sm);
}
scip_count += 2;
}
for (uint64_t i = 0; i < spa->spa_root_vdev->vdev_children; i++) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[i];
vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
if (vic->vic_mapping_object != 0) {
ASSERT(vd->vdev_ops == &vdev_indirect_ops ||
vd->vdev_removing);
indirect_vdev_count++;
if (vd->vdev_indirect_mapping->vim_havecounts) {
obsolete_counts_count++;
}
}
boolean_t are_precise;
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (are_precise) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ASSERT(vic->vic_mapping_object != 0);
precise_vdev_count++;
}
uint64_t obsolete_sm_object;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
if (obsolete_sm_object != 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ASSERT(vic->vic_mapping_object != 0);
obsolete_sm_count++;
}
}
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_DEVICE_REMOVAL],
&dr_feature_refcount);
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_OBSOLETE_COUNTS],
&oc_feature_refcount);
if (dr_feature_refcount != indirect_vdev_count) {
ret = 1;
(void) printf("Number of indirect vdevs (%llu) " \
"does not match feature count (%llu)\n",
(u_longlong_t)indirect_vdev_count,
(u_longlong_t)dr_feature_refcount);
} else {
(void) printf("Verified device_removal feature refcount " \
"of %llu is correct\n",
(u_longlong_t)dr_feature_refcount);
}
if (zap_contains(spa_meta_objset(spa), DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_OBSOLETE_BPOBJ) == 0) {
obsolete_bpobj_count++;
}
obsolete_counts_object_count = precise_vdev_count;
obsolete_counts_object_count += obsolete_sm_count;
obsolete_counts_object_count += obsolete_counts_count;
obsolete_counts_object_count += scip_count;
obsolete_counts_object_count += obsolete_bpobj_count;
obsolete_counts_object_count += remap_deadlist_count;
if (oc_feature_refcount != obsolete_counts_object_count) {
ret = 1;
(void) printf("Number of obsolete counts objects (%llu) " \
"does not match feature count (%llu)\n",
(u_longlong_t)obsolete_counts_object_count,
(u_longlong_t)oc_feature_refcount);
(void) printf("pv:%llu os:%llu oc:%llu sc:%llu "
"ob:%llu rd:%llu\n",
(u_longlong_t)precise_vdev_count,
(u_longlong_t)obsolete_sm_count,
(u_longlong_t)obsolete_counts_count,
(u_longlong_t)scip_count,
(u_longlong_t)obsolete_bpobj_count,
(u_longlong_t)remap_deadlist_count);
} else {
(void) printf("Verified indirect_refcount feature refcount " \
"of %llu is correct\n",
(u_longlong_t)oc_feature_refcount);
}
return (ret);
}
static void
zdb_set_skip_mmp(char *target)
{
spa_t *spa;
/*
* Disable the activity check to allow examination of
* active pools.
*/
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(target)) != NULL) {
spa->spa_import_flags |= ZFS_IMPORT_SKIP_MMP;
}
mutex_exit(&spa_namespace_lock);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
#define BOGUS_SUFFIX "_CHECKPOINTED_UNIVERSE"
/*
* Import the checkpointed state of the pool specified by the target
* parameter as readonly. The function also accepts a pool config
* as an optional parameter, else it attempts to infer the config by
* the name of the target pool.
*
* Note that the checkpointed state's pool name will be the name of
* the original pool with the above suffix appened to it. In addition,
* if the target is not a pool name (e.g. a path to a dataset) then
* the new_path parameter is populated with the updated path to
* reflect the fact that we are looking into the checkpointed state.
*
* The function returns a newly-allocated copy of the name of the
* pool containing the checkpointed state. When this copy is no
* longer needed it should be freed with free(3C). Same thing
* applies to the new_path parameter if allocated.
*/
static char *
import_checkpointed_state(char *target, nvlist_t *cfg, char **new_path)
{
int error = 0;
char *poolname, *bogus_name = NULL;
/* If the target is not a pool, the extract the pool name */
char *path_start = strchr(target, '/');
if (path_start != NULL) {
size_t poolname_len = path_start - target;
poolname = strndup(target, poolname_len);
} else {
poolname = target;
}
if (cfg == NULL) {
zdb_set_skip_mmp(poolname);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
error = spa_get_stats(poolname, &cfg, NULL, 0);
if (error != 0) {
fatal("Tried to read config of pool \"%s\" but "
"spa_get_stats() failed with error %d\n",
poolname, error);
}
}
if (asprintf(&bogus_name, "%s%s", poolname, BOGUS_SUFFIX) == -1)
return (NULL);
fnvlist_add_string(cfg, ZPOOL_CONFIG_POOL_NAME, bogus_name);
error = spa_import(bogus_name, cfg, NULL,
ZFS_IMPORT_MISSING_LOG | ZFS_IMPORT_CHECKPOINT |
ZFS_IMPORT_SKIP_MMP);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if (error != 0) {
fatal("Tried to import pool \"%s\" but spa_import() failed "
"with error %d\n", bogus_name, error);
}
if (new_path != NULL && path_start != NULL) {
if (asprintf(new_path, "%s%s", bogus_name, path_start) == -1) {
if (path_start != NULL)
free(poolname);
return (NULL);
}
}
if (target != poolname)
free(poolname);
return (bogus_name);
}
typedef struct verify_checkpoint_sm_entry_cb_arg {
vdev_t *vcsec_vd;
/* the following fields are only used for printing progress */
uint64_t vcsec_entryid;
uint64_t vcsec_num_entries;
} verify_checkpoint_sm_entry_cb_arg_t;
#define ENTRIES_PER_PROGRESS_UPDATE 10000
static int
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
verify_checkpoint_sm_entry_cb(space_map_entry_t *sme, void *arg)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
{
verify_checkpoint_sm_entry_cb_arg_t *vcsec = arg;
vdev_t *vd = vcsec->vcsec_vd;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
metaslab_t *ms = vd->vdev_ms[sme->sme_offset >> vd->vdev_ms_shift];
uint64_t end = sme->sme_offset + sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
ASSERT(sme->sme_type == SM_FREE);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if ((vcsec->vcsec_entryid % ENTRIES_PER_PROGRESS_UPDATE) == 0) {
(void) fprintf(stderr,
"\rverifying vdev %llu, space map entry %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)vcsec->vcsec_entryid,
(longlong_t)vcsec->vcsec_num_entries);
}
vcsec->vcsec_entryid++;
/*
* See comment in checkpoint_sm_exclude_entry_cb()
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
VERIFY3U(sme->sme_offset, >=, ms->ms_start);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
VERIFY3U(end, <=, ms->ms_start + ms->ms_size);
/*
* The entries in the vdev_checkpoint_sm should be marked as
* allocated in the checkpointed state of the pool, therefore
* their respective ms_allocateable trees should not contain them.
*/
mutex_enter(&ms->ms_lock);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
range_tree_verify(ms->ms_allocatable, sme->sme_offset, sme->sme_run);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
mutex_exit(&ms->ms_lock);
return (0);
}
/*
* Verify that all segments in the vdev_checkpoint_sm are allocated
* according to the checkpoint's ms_sm (i.e. are not in the checkpoint's
* ms_allocatable).
*
* Do so by comparing the checkpoint space maps (vdev_checkpoint_sm) of
* each vdev in the current state of the pool to the metaslab space maps
* (ms_sm) of the checkpointed state of the pool.
*
* Note that the function changes the state of the ms_allocatable
* trees of the current spa_t. The entries of these ms_allocatable
* trees are cleared out and then repopulated from with the free
* entries of their respective ms_sm space maps.
*/
static void
verify_checkpoint_vdev_spacemaps(spa_t *checkpoint, spa_t *current)
{
vdev_t *ckpoint_rvd = checkpoint->spa_root_vdev;
vdev_t *current_rvd = current->spa_root_vdev;
load_concrete_ms_allocatable_trees(checkpoint, SM_FREE);
for (uint64_t c = 0; c < ckpoint_rvd->vdev_children; c++) {
vdev_t *ckpoint_vd = ckpoint_rvd->vdev_child[c];
vdev_t *current_vd = current_rvd->vdev_child[c];
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
if (ckpoint_vd->vdev_ops == &vdev_indirect_ops) {
/*
* Since we don't allow device removal in a pool
* that has a checkpoint, we expect that all removed
* vdevs were removed from the pool before the
* checkpoint.
*/
ASSERT3P(current_vd->vdev_ops, ==, &vdev_indirect_ops);
continue;
}
/*
* If the checkpoint space map doesn't exist, then nothing
* here is checkpointed so there's nothing to verify.
*/
if (current_vd->vdev_top_zap == 0 ||
zap_contains(spa_meta_objset(current),
current_vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
continue;
VERIFY0(zap_lookup(spa_meta_objset(current),
current_vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
sizeof (uint64_t), 1, &checkpoint_sm_obj));
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(current),
checkpoint_sm_obj, 0, current_vd->vdev_asize,
current_vd->vdev_ashift));
space_map_update(checkpoint_sm);
verify_checkpoint_sm_entry_cb_arg_t vcsec;
vcsec.vcsec_vd = ckpoint_vd;
vcsec.vcsec_entryid = 0;
vcsec.vcsec_num_entries =
space_map_length(checkpoint_sm) / sizeof (uint64_t);
VERIFY0(space_map_iterate(checkpoint_sm,
verify_checkpoint_sm_entry_cb, &vcsec));
if (dump_opt['m'] > 3)
dump_spacemap(current->spa_meta_objset, checkpoint_sm);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
space_map_close(checkpoint_sm);
}
/*
* If we've added vdevs since we took the checkpoint, ensure
* that their checkpoint space maps are empty.
*/
if (ckpoint_rvd->vdev_children < current_rvd->vdev_children) {
for (uint64_t c = ckpoint_rvd->vdev_children;
c < current_rvd->vdev_children; c++) {
vdev_t *current_vd = current_rvd->vdev_child[c];
ASSERT3P(current_vd->vdev_checkpoint_sm, ==, NULL);
}
}
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
}
/*
* Verifies that all space that's allocated in the checkpoint is
* still allocated in the current version, by checking that everything
* in checkpoint's ms_allocatable (which is actually allocated, not
* allocatable/free) is not present in current's ms_allocatable.
*
* Note that the function changes the state of the ms_allocatable
* trees of both spas when called. The entries of all ms_allocatable
* trees are cleared out and then repopulated from their respective
* ms_sm space maps. In the checkpointed state we load the allocated
* entries, and in the current state we load the free entries.
*/
static void
verify_checkpoint_ms_spacemaps(spa_t *checkpoint, spa_t *current)
{
vdev_t *ckpoint_rvd = checkpoint->spa_root_vdev;
vdev_t *current_rvd = current->spa_root_vdev;
load_concrete_ms_allocatable_trees(checkpoint, SM_ALLOC);
load_concrete_ms_allocatable_trees(current, SM_FREE);
for (uint64_t i = 0; i < ckpoint_rvd->vdev_children; i++) {
vdev_t *ckpoint_vd = ckpoint_rvd->vdev_child[i];
vdev_t *current_vd = current_rvd->vdev_child[i];
if (ckpoint_vd->vdev_ops == &vdev_indirect_ops) {
/*
* See comment in verify_checkpoint_vdev_spacemaps()
*/
ASSERT3P(current_vd->vdev_ops, ==, &vdev_indirect_ops);
continue;
}
for (uint64_t m = 0; m < ckpoint_vd->vdev_ms_count; m++) {
metaslab_t *ckpoint_msp = ckpoint_vd->vdev_ms[m];
metaslab_t *current_msp = current_vd->vdev_ms[m];
(void) fprintf(stderr,
"\rverifying vdev %llu of %llu, "
"metaslab %llu of %llu ...",
(longlong_t)current_vd->vdev_id,
(longlong_t)current_rvd->vdev_children,
(longlong_t)current_vd->vdev_ms[m]->ms_id,
(longlong_t)current_vd->vdev_ms_count);
/*
* We walk through the ms_allocatable trees that
* are loaded with the allocated blocks from the
* ms_sm spacemaps of the checkpoint. For each
* one of these ranges we ensure that none of them
* exists in the ms_allocatable trees of the
* current state which are loaded with the ranges
* that are currently free.
*
* This way we ensure that none of the blocks that
* are part of the checkpoint were freed by mistake.
*/
range_tree_walk(ckpoint_msp->ms_allocatable,
(range_tree_func_t *)range_tree_verify,
current_msp->ms_allocatable);
}
}
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
}
static void
verify_checkpoint_blocks(spa_t *spa)
{
spa_t *checkpoint_spa;
char *checkpoint_pool;
nvlist_t *config = NULL;
int error = 0;
/*
* We import the checkpointed state of the pool (under a different
* name) so we can do verification on it against the current state
* of the pool.
*/
checkpoint_pool = import_checkpointed_state(spa->spa_name, config,
NULL);
ASSERT(strcmp(spa->spa_name, checkpoint_pool) != 0);
error = spa_open(checkpoint_pool, &checkpoint_spa, FTAG);
if (error != 0) {
fatal("Tried to open pool \"%s\" but spa_open() failed with "
"error %d\n", checkpoint_pool, error);
}
/*
* Ensure that ranges in the checkpoint space maps of each vdev
* are allocated according to the checkpointed state's metaslab
* space maps.
*/
verify_checkpoint_vdev_spacemaps(checkpoint_spa, spa);
/*
* Ensure that allocated ranges in the checkpoint's metaslab
* space maps remain allocated in the metaslab space maps of
* the current state.
*/
verify_checkpoint_ms_spacemaps(checkpoint_spa, spa);
/*
* Once we are done, we get rid of the checkpointed state.
*/
spa_close(checkpoint_spa, FTAG);
free(checkpoint_pool);
}
static void
dump_leftover_checkpoint_blocks(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t i = 0; i < rvd->vdev_children; i++) {
vdev_t *vd = rvd->vdev_child[i];
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
if (vd->vdev_top_zap == 0)
continue;
if (zap_contains(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
continue;
VERIFY0(zap_lookup(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
sizeof (uint64_t), 1, &checkpoint_sm_obj));
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(spa),
checkpoint_sm_obj, 0, vd->vdev_asize, vd->vdev_ashift));
space_map_update(checkpoint_sm);
dump_spacemap(spa->spa_meta_objset, checkpoint_sm);
space_map_close(checkpoint_sm);
}
}
static int
verify_checkpoint(spa_t *spa)
{
uberblock_t checkpoint;
int error;
if (!spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT))
return (0);
error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_ZPOOL_CHECKPOINT, sizeof (uint64_t),
sizeof (uberblock_t) / sizeof (uint64_t), &checkpoint);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
if (error == ENOENT && !dump_opt['L']) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/*
* If the feature is active but the uberblock is missing
* then we must be in the middle of discarding the
* checkpoint.
*/
(void) printf("\nPartially discarded checkpoint "
"state found:\n");
if (dump_opt['m'] > 3)
dump_leftover_checkpoint_blocks(spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
return (0);
} else if (error != 0) {
(void) printf("lookup error %d when looking for "
"checkpointed uberblock in MOS\n", error);
return (error);
}
dump_uberblock(&checkpoint, "\nCheckpointed uberblock found:\n", "\n");
if (checkpoint.ub_checkpoint_txg == 0) {
(void) printf("\nub_checkpoint_txg not set in checkpointed "
"uberblock\n");
error = 3;
}
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
if (error == 0 && !dump_opt['L'])
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
verify_checkpoint_blocks(spa);
return (error);
}
/* ARGSUSED */
static void
mos_leaks_cb(void *arg, uint64_t start, uint64_t size)
{
for (uint64_t i = start; i < size; i++) {
(void) printf("MOS object %llu referenced but not allocated\n",
(u_longlong_t)i);
}
}
static void
mos_obj_refd(uint64_t obj)
{
if (obj != 0 && mos_refd_objs != NULL)
range_tree_add(mos_refd_objs, obj, 1);
}
/*
* Call on a MOS object that may already have been referenced.
*/
static void
mos_obj_refd_multiple(uint64_t obj)
{
if (obj != 0 && mos_refd_objs != NULL &&
!range_tree_contains(mos_refd_objs, obj, 1))
range_tree_add(mos_refd_objs, obj, 1);
}
static void
mos_leak_vdev(vdev_t *vd)
{
mos_obj_refd(vd->vdev_dtl_object);
mos_obj_refd(vd->vdev_ms_array);
mos_obj_refd(vd->vdev_top_zap);
mos_obj_refd(vd->vdev_indirect_config.vic_births_object);
mos_obj_refd(vd->vdev_indirect_config.vic_mapping_object);
mos_obj_refd(vd->vdev_leaf_zap);
if (vd->vdev_checkpoint_sm != NULL)
mos_obj_refd(vd->vdev_checkpoint_sm->sm_object);
if (vd->vdev_indirect_mapping != NULL) {
mos_obj_refd(vd->vdev_indirect_mapping->
vim_phys->vimp_counts_object);
}
if (vd->vdev_obsolete_sm != NULL)
mos_obj_refd(vd->vdev_obsolete_sm->sm_object);
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *ms = vd->vdev_ms[m];
mos_obj_refd(space_map_object(ms->ms_sm));
}
for (uint64_t c = 0; c < vd->vdev_children; c++) {
mos_leak_vdev(vd->vdev_child[c]);
}
}
static int
dump_mos_leaks(spa_t *spa)
{
int rv = 0;
objset_t *mos = spa->spa_meta_objset;
dsl_pool_t *dp = spa->spa_dsl_pool;
/* Visit and mark all referenced objects in the MOS */
mos_obj_refd(DMU_POOL_DIRECTORY_OBJECT);
mos_obj_refd(spa->spa_pool_props_object);
mos_obj_refd(spa->spa_config_object);
mos_obj_refd(spa->spa_ddt_stat_object);
mos_obj_refd(spa->spa_feat_desc_obj);
mos_obj_refd(spa->spa_feat_enabled_txg_obj);
mos_obj_refd(spa->spa_feat_for_read_obj);
mos_obj_refd(spa->spa_feat_for_write_obj);
mos_obj_refd(spa->spa_history);
mos_obj_refd(spa->spa_errlog_last);
mos_obj_refd(spa->spa_errlog_scrub);
mos_obj_refd(spa->spa_all_vdev_zaps);
mos_obj_refd(spa->spa_dsl_pool->dp_bptree_obj);
mos_obj_refd(spa->spa_dsl_pool->dp_tmp_userrefs_obj);
mos_obj_refd(spa->spa_dsl_pool->dp_scan->scn_phys.scn_queue_obj);
bpobj_count_refd(&spa->spa_deferred_bpobj);
mos_obj_refd(dp->dp_empty_bpobj);
bpobj_count_refd(&dp->dp_obsolete_bpobj);
bpobj_count_refd(&dp->dp_free_bpobj);
mos_obj_refd(spa->spa_l2cache.sav_object);
mos_obj_refd(spa->spa_spares.sav_object);
mos_obj_refd(spa->spa_condensing_indirect_phys.
scip_next_mapping_object);
mos_obj_refd(spa->spa_condensing_indirect_phys.
scip_prev_obsolete_sm_object);
if (spa->spa_condensing_indirect_phys.scip_next_mapping_object != 0) {
vdev_indirect_mapping_t *vim =
vdev_indirect_mapping_open(mos,
spa->spa_condensing_indirect_phys.scip_next_mapping_object);
mos_obj_refd(vim->vim_phys->vimp_counts_object);
vdev_indirect_mapping_close(vim);
}
if (dp->dp_origin_snap != NULL) {
dsl_dataset_t *ds;
dsl_pool_config_enter(dp, FTAG);
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(dp->dp_origin_snap)->ds_next_snap_obj,
FTAG, &ds));
count_ds_mos_objects(ds);
dump_deadlist(&ds->ds_deadlist);
dsl_dataset_rele(ds, FTAG);
dsl_pool_config_exit(dp, FTAG);
count_ds_mos_objects(dp->dp_origin_snap);
dump_deadlist(&dp->dp_origin_snap->ds_deadlist);
}
count_dir_mos_objects(dp->dp_mos_dir);
if (dp->dp_free_dir != NULL)
count_dir_mos_objects(dp->dp_free_dir);
if (dp->dp_leak_dir != NULL)
count_dir_mos_objects(dp->dp_leak_dir);
mos_leak_vdev(spa->spa_root_vdev);
for (uint64_t class = 0; class < DDT_CLASSES; class++) {
for (uint64_t type = 0; type < DDT_TYPES; type++) {
for (uint64_t cksum = 0;
cksum < ZIO_CHECKSUM_FUNCTIONS; cksum++) {
ddt_t *ddt = spa->spa_ddt[cksum];
mos_obj_refd(ddt->ddt_object[type][class]);
}
}
}
/*
* Visit all allocated objects and make sure they are referenced.
*/
uint64_t object = 0;
while (dmu_object_next(mos, &object, B_FALSE, 0) == 0) {
if (range_tree_contains(mos_refd_objs, object, 1)) {
range_tree_remove(mos_refd_objs, object, 1);
} else {
dmu_object_info_t doi;
const char *name;
dmu_object_info(mos, object, &doi);
if (doi.doi_type & DMU_OT_NEWTYPE) {
dmu_object_byteswap_t bswap =
DMU_OT_BYTESWAP(doi.doi_type);
name = dmu_ot_byteswap[bswap].ob_name;
} else {
name = dmu_ot[doi.doi_type].ot_name;
}
(void) printf("MOS object %llu (%s) leaked\n",
(u_longlong_t)object, name);
rv = 2;
}
}
(void) range_tree_walk(mos_refd_objs, mos_leaks_cb, NULL);
if (!range_tree_is_empty(mos_refd_objs))
rv = 2;
range_tree_vacate(mos_refd_objs, NULL, NULL);
range_tree_destroy(mos_refd_objs);
return (rv);
}
2008-11-20 23:01:55 +03:00
static void
dump_zpool(spa_t *spa)
{
dsl_pool_t *dp = spa_get_dsl(spa);
int rc = 0;
if (dump_opt['S']) {
dump_simulated_ddt(spa);
return;
}
if (!dump_opt['e'] && dump_opt['C'] > 1) {
(void) printf("\nCached configuration:\n");
dump_nvlist(spa->spa_config, 8);
}
if (dump_opt['C'])
dump_config(spa);
2008-11-20 23:01:55 +03:00
if (dump_opt['u'])
dump_uberblock(&spa->spa_uberblock, "\nUberblock:\n", "\n");
2008-11-20 23:01:55 +03:00
if (dump_opt['D'])
dump_all_ddts(spa);
if (dump_opt['d'] > 2 || dump_opt['m'])
dump_metaslabs(spa);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
if (dump_opt['M'])
dump_metaslab_groups(spa);
if (dump_opt['d'] || dump_opt['i']) {
spa_feature_t f;
mos_refd_objs = range_tree_create(NULL, NULL);
2008-11-20 23:01:55 +03:00
dump_dir(dp->dp_meta_objset);
2008-11-20 23:01:55 +03:00
if (dump_opt['d'] >= 3) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dsl_pool_t *dp = spa->spa_dsl_pool;
dump_full_bpobj(&spa->spa_deferred_bpobj,
"Deferred frees", 0);
if (spa_version(spa) >= SPA_VERSION_DEADLISTS) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dump_full_bpobj(&dp->dp_free_bpobj,
"Pool snapshot frees", 0);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (bpobj_is_open(&dp->dp_obsolete_bpobj)) {
ASSERT(spa_feature_is_enabled(spa,
SPA_FEATURE_DEVICE_REMOVAL));
dump_full_bpobj(&dp->dp_obsolete_bpobj,
"Pool obsolete blocks", 0);
}
if (spa_feature_is_active(spa,
SPA_FEATURE_ASYNC_DESTROY)) {
dump_bptree(spa->spa_meta_objset,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dp->dp_bptree_obj,
"Pool dataset frees");
}
2008-11-20 23:01:55 +03:00
dump_dtl(spa->spa_root_vdev, 0);
}
(void) dmu_objset_find(spa_name(spa), dump_one_dir,
NULL, DS_FIND_SNAPSHOTS | DS_FIND_CHILDREN);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
if (rc == 0 && !dump_opt['L'])
rc = dump_mos_leaks(spa);
for (f = 0; f < SPA_FEATURES; f++) {
uint64_t refcount;
if (!(spa_feature_table[f].fi_flags &
ZFEATURE_FLAG_PER_DATASET) ||
!spa_feature_is_enabled(spa, f)) {
ASSERT0(dataset_feature_count[f]);
continue;
}
if (feature_get_refcount(spa, &spa_feature_table[f],
&refcount) == ENOTSUP)
continue;
if (dataset_feature_count[f] != refcount) {
(void) printf("%s feature refcount mismatch: "
"%lld datasets != %lld refcount\n",
spa_feature_table[f].fi_uname,
(longlong_t)dataset_feature_count[f],
(longlong_t)refcount);
rc = 2;
} else {
(void) printf("Verified %s feature refcount "
"of %llu is correct\n",
spa_feature_table[f].fi_uname,
(longlong_t)refcount);
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (rc == 0) {
rc = verify_device_removal_feature_counts(spa);
}
2008-11-20 23:01:55 +03:00
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
if (rc == 0 && (dump_opt['b'] || dump_opt['c']))
2008-11-20 23:01:55 +03:00
rc = dump_block_stats(spa);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
if (rc == 0)
rc = verify_spacemap_refcounts(spa);
2008-11-20 23:01:55 +03:00
if (dump_opt['s'])
show_pool_stats(spa);
if (dump_opt['h'])
dump_history(spa);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 19:30:49 +03:00
if (rc == 0)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
rc = verify_checkpoint(spa);
if (rc != 0) {
dump_debug_buffer();
2008-11-20 23:01:55 +03:00
exit(rc);
}
2008-11-20 23:01:55 +03:00
}
#define ZDB_FLAG_CHECKSUM 0x0001
#define ZDB_FLAG_DECOMPRESS 0x0002
#define ZDB_FLAG_BSWAP 0x0004
#define ZDB_FLAG_GBH 0x0008
#define ZDB_FLAG_INDIRECT 0x0010
#define ZDB_FLAG_PHYS 0x0020
#define ZDB_FLAG_RAW 0x0040
#define ZDB_FLAG_PRINT_BLKPTR 0x0080
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
static int flagbits[256];
2008-11-20 23:01:55 +03:00
static void
zdb_print_blkptr(blkptr_t *bp, int flags)
{
char blkbuf[BP_SPRINTF_LEN];
2008-11-20 23:01:55 +03:00
if (flags & ZDB_FLAG_BSWAP)
byteswap_uint64_array((void *)bp, sizeof (blkptr_t));
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("%s\n", blkbuf);
2008-11-20 23:01:55 +03:00
}
static void
zdb_dump_indirect(blkptr_t *bp, int nbps, int flags)
{
int i;
for (i = 0; i < nbps; i++)
zdb_print_blkptr(&bp[i], flags);
}
static void
zdb_dump_gbh(void *buf, int flags)
{
zdb_dump_indirect((blkptr_t *)buf, SPA_GBH_NBLKPTRS, flags);
}
static void
zdb_dump_block_raw(void *buf, uint64_t size, int flags)
{
if (flags & ZDB_FLAG_BSWAP)
byteswap_uint64_array(buf, size);
VERIFY(write(fileno(stdout), buf, size) == size);
2008-11-20 23:01:55 +03:00
}
static void
zdb_dump_block(char *label, void *buf, uint64_t size, int flags)
{
uint64_t *d = (uint64_t *)buf;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned nwords = size / sizeof (uint64_t);
2008-11-20 23:01:55 +03:00
int do_bswap = !!(flags & ZDB_FLAG_BSWAP);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned i, j;
const char *hdr;
char *c;
2008-11-20 23:01:55 +03:00
if (do_bswap)
hdr = " 7 6 5 4 3 2 1 0 f e d c b a 9 8";
else
hdr = " 0 1 2 3 4 5 6 7 8 9 a b c d e f";
(void) printf("\n%s\n%6s %s 0123456789abcdef\n", label, "", hdr);
#ifdef _LITTLE_ENDIAN
/* correct the endianness */
do_bswap = !do_bswap;
#endif
2008-11-20 23:01:55 +03:00
for (i = 0; i < nwords; i += 2) {
(void) printf("%06llx: %016llx %016llx ",
(u_longlong_t)(i * sizeof (uint64_t)),
(u_longlong_t)(do_bswap ? BSWAP_64(d[i]) : d[i]),
(u_longlong_t)(do_bswap ? BSWAP_64(d[i + 1]) : d[i + 1]));
c = (char *)&d[i];
for (j = 0; j < 2 * sizeof (uint64_t); j++)
(void) printf("%c", isprint(c[j]) ? c[j] : '.');
(void) printf("\n");
}
}
/*
* There are two acceptable formats:
* leaf_name - For example: c1t0d0 or /tmp/ztest.0a
* child[.child]* - For example: 0.1.1
*
* The second form can be used to specify arbitrary vdevs anywhere
* in the hierarchy. For example, in a pool with a mirror of
2008-11-20 23:01:55 +03:00
* RAID-Zs, you can specify either RAID-Z vdev with 0.0 or 0.1 .
*/
static vdev_t *
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
zdb_vdev_lookup(vdev_t *vdev, const char *path)
2008-11-20 23:01:55 +03:00
{
char *s, *p, *q;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
unsigned i;
2008-11-20 23:01:55 +03:00
if (vdev == NULL)
return (NULL);
/* First, assume the x.x.x.x format */
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
i = strtoul(path, &s, 10);
2008-11-20 23:01:55 +03:00
if (s == path || (s && *s != '.' && *s != '\0'))
goto name;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
if (i >= vdev->vdev_children)
2008-11-20 23:01:55 +03:00
return (NULL);
vdev = vdev->vdev_child[i];
if (s && *s == '\0')
2008-11-20 23:01:55 +03:00
return (vdev);
return (zdb_vdev_lookup(vdev, s+1));
name:
for (i = 0; i < vdev->vdev_children; i++) {
vdev_t *vc = vdev->vdev_child[i];
if (vc->vdev_path == NULL) {
vc = zdb_vdev_lookup(vc, path);
if (vc == NULL)
continue;
else
return (vc);
}
p = strrchr(vc->vdev_path, '/');
p = p ? p + 1 : vc->vdev_path;
q = &vc->vdev_path[strlen(vc->vdev_path) - 2];
if (strcmp(vc->vdev_path, path) == 0)
return (vc);
if (strcmp(p, path) == 0)
return (vc);
if (strcmp(q, "s0") == 0 && strncmp(p, path, q - p) == 0)
return (vc);
}
return (NULL);
}
/*
* Read a block from a pool and print it out. The syntax of the
* block descriptor is:
*
* pool:vdev_specifier:offset:size[:flags]
*
* pool - The name of the pool you wish to read from
* vdev_specifier - Which vdev (see comment for zdb_vdev_lookup)
* offset - offset, in hex, in bytes
* size - Amount of data to read, in hex, in bytes
* flags - A string of characters specifying options
* b: Decode a blkptr at given offset within block
* *c: Calculate and display checksums
* d: Decompress data before dumping
2008-11-20 23:01:55 +03:00
* e: Byteswap data before dumping
* g: Display data as a gang block header
* i: Display as an indirect block
2008-11-20 23:01:55 +03:00
* p: Do I/O to physical offset
* r: Dump raw data to stdout
*
* * = not yet implemented
*/
static void
zdb_read_block(char *thing, spa_t *spa)
2008-11-20 23:01:55 +03:00
{
blkptr_t blk, *bp = &blk;
dva_t *dva = bp->blk_dva;
2008-11-20 23:01:55 +03:00
int flags = 0;
uint64_t offset = 0, size = 0, psize = 0, lsize = 0, blkptr_offset = 0;
2008-11-20 23:01:55 +03:00
zio_t *zio;
vdev_t *vd;
abd_t *pabd;
void *lbuf, *buf;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
const char *s, *vdev;
char *p, *dup, *flagstr;
int i, error;
boolean_t borrowed = B_FALSE;
2008-11-20 23:01:55 +03:00
dup = strdup(thing);
s = strtok(dup, ":");
vdev = s ? s : "";
s = strtok(NULL, ":");
offset = strtoull(s ? s : "", NULL, 16);
s = strtok(NULL, ":");
size = strtoull(s ? s : "", NULL, 16);
s = strtok(NULL, ":");
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
if (s)
flagstr = strdup(s);
else
flagstr = strdup("");
2008-11-20 23:01:55 +03:00
s = NULL;
if (size == 0)
s = "size must not be zero";
if (!IS_P2ALIGNED(size, DEV_BSIZE))
s = "size must be a multiple of sector size";
if (!IS_P2ALIGNED(offset, DEV_BSIZE))
s = "offset must be a multiple of sector size";
if (s) {
(void) printf("Invalid block specifier: %s - %s\n", thing, s);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
free(flagstr);
2008-11-20 23:01:55 +03:00
free(dup);
return;
}
for (s = strtok(flagstr, ":"); s; s = strtok(NULL, ":")) {
for (i = 0; flagstr[i]; i++) {
int bit = flagbits[(uchar_t)flagstr[i]];
if (bit == 0) {
(void) printf("***Invalid flag: %c\n",
flagstr[i]);
continue;
}
flags |= bit;
/* If it's not something with an argument, keep going */
if ((bit & (ZDB_FLAG_CHECKSUM |
2008-11-20 23:01:55 +03:00
ZDB_FLAG_PRINT_BLKPTR)) == 0)
continue;
p = &flagstr[i + 1];
if (bit == ZDB_FLAG_PRINT_BLKPTR) {
2008-11-20 23:01:55 +03:00
blkptr_offset = strtoull(p, &p, 16);
i = p - &flagstr[i + 1];
}
2008-11-20 23:01:55 +03:00
if (*p != ':' && *p != '\0') {
(void) printf("***Invalid flag arg: '%s'\n", s);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
free(flagstr);
2008-11-20 23:01:55 +03:00
free(dup);
return;
}
}
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
free(flagstr);
2008-11-20 23:01:55 +03:00
vd = zdb_vdev_lookup(spa->spa_root_vdev, vdev);
if (vd == NULL) {
(void) printf("***Invalid vdev: %s\n", vdev);
free(dup);
return;
} else {
if (vd->vdev_path)
(void) fprintf(stderr, "Found vdev: %s\n",
vd->vdev_path);
2008-11-20 23:01:55 +03:00
else
(void) fprintf(stderr, "Found vdev type: %s\n",
2008-11-20 23:01:55 +03:00
vd->vdev_ops->vdev_op_type);
}
psize = size;
lsize = size;
pabd = abd_alloc_for_io(SPA_MAXBLOCKSIZE, B_FALSE);
lbuf = umem_alloc(SPA_MAXBLOCKSIZE, UMEM_NOFAIL);
BP_ZERO(bp);
2008-11-20 23:01:55 +03:00
DVA_SET_VDEV(&dva[0], vd->vdev_id);
DVA_SET_OFFSET(&dva[0], offset);
DVA_SET_GANG(&dva[0], !!(flags & ZDB_FLAG_GBH));
DVA_SET_ASIZE(&dva[0], vdev_psize_to_asize(vd, psize));
BP_SET_BIRTH(bp, TXG_INITIAL, TXG_INITIAL);
BP_SET_LSIZE(bp, lsize);
BP_SET_PSIZE(bp, psize);
BP_SET_COMPRESS(bp, ZIO_COMPRESS_OFF);
BP_SET_CHECKSUM(bp, ZIO_CHECKSUM_OFF);
BP_SET_TYPE(bp, DMU_OT_NONE);
BP_SET_LEVEL(bp, 0);
BP_SET_DEDUP(bp, 0);
BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER);
2008-11-20 23:01:55 +03:00
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
2008-11-20 23:01:55 +03:00
zio = zio_root(spa, NULL, NULL, 0);
if (vd == vd->vdev_top) {
/*
* Treat this as a normal block read.
*/
zio_nowait(zio_read(zio, spa, bp, pabd, psize, NULL, NULL,
ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW, NULL));
} else {
/*
* Treat this as a vdev child I/O.
*/
zio_nowait(zio_vdev_child_io(zio, bp, vd, offset, pabd,
psize, ZIO_TYPE_READ, ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE |
ZIO_FLAG_DONT_PROPAGATE | ZIO_FLAG_DONT_RETRY |
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW | ZIO_FLAG_OPTIONAL,
NULL, NULL));
}
2008-11-20 23:01:55 +03:00
error = zio_wait(zio);
spa_config_exit(spa, SCL_STATE, FTAG);
2008-11-20 23:01:55 +03:00
if (error) {
(void) printf("Read of %s failed, error: %d\n", thing, error);
goto out;
}
if (flags & ZDB_FLAG_DECOMPRESS) {
/*
* We don't know how the data was compressed, so just try
* every decompress function at every inflated blocksize.
*/
enum zio_compress c;
void *lbuf2 = umem_alloc(SPA_MAXBLOCKSIZE, UMEM_NOFAIL);
/*
* XXX - On the one hand, with SPA_MAXBLOCKSIZE at 16MB,
* this could take a while and we should let the user know
* we are not stuck. On the other hand, printing progress
* info gets old after a while. What to do?
*/
for (lsize = psize + SPA_MINBLOCKSIZE;
lsize <= SPA_MAXBLOCKSIZE; lsize += SPA_MINBLOCKSIZE) {
for (c = 0; c < ZIO_COMPRESS_FUNCTIONS; c++) {
/*
* ZLE can easily decompress non zle stream.
* So have an option to disable it.
*/
if (c == ZIO_COMPRESS_ZLE &&
getenv("ZDB_NO_ZLE"))
continue;
(void) fprintf(stderr,
"Trying %05llx -> %05llx (%s)\n",
(u_longlong_t)psize, (u_longlong_t)lsize,
zio_compress_table[c].ci_name);
/*
* We randomize lbuf2, and decompress to both
* lbuf and lbuf2. This way, we will know if
* decompression fill exactly to lsize.
*/
VERIFY0(random_get_pseudo_bytes(lbuf2, lsize));
if (zio_decompress_data(c, pabd,
lbuf, psize, lsize) == 0 &&
zio_decompress_data(c, pabd,
lbuf2, psize, lsize) == 0 &&
bcmp(lbuf, lbuf2, lsize) == 0)
break;
}
if (c != ZIO_COMPRESS_FUNCTIONS)
break;
}
umem_free(lbuf2, SPA_MAXBLOCKSIZE);
if (lsize > SPA_MAXBLOCKSIZE) {
(void) printf("Decompress of %s failed\n", thing);
goto out;
}
buf = lbuf;
size = lsize;
} else {
size = psize;
buf = abd_borrow_buf_copy(pabd, size);
borrowed = B_TRUE;
}
2008-11-20 23:01:55 +03:00
if (flags & ZDB_FLAG_PRINT_BLKPTR)
zdb_print_blkptr((blkptr_t *)(void *)
((uintptr_t)buf + (uintptr_t)blkptr_offset), flags);
else if (flags & ZDB_FLAG_RAW)
zdb_dump_block_raw(buf, size, flags);
else if (flags & ZDB_FLAG_INDIRECT)
zdb_dump_indirect((blkptr_t *)buf, size / sizeof (blkptr_t),
flags);
else if (flags & ZDB_FLAG_GBH)
zdb_dump_gbh(buf, flags);
else
zdb_dump_block(thing, buf, size, flags);
if (borrowed)
abd_return_buf_copy(pabd, buf, size);
2008-11-20 23:01:55 +03:00
out:
abd_free(pabd);
umem_free(lbuf, SPA_MAXBLOCKSIZE);
2008-11-20 23:01:55 +03:00
free(dup);
}
static void
zdb_embedded_block(char *thing)
{
blkptr_t bp;
unsigned long long *words = (void *)&bp;
char *buf;
int err;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
bzero(&bp, sizeof (bp));
err = sscanf(thing, "%llx:%llx:%llx:%llx:%llx:%llx:%llx:%llx:"
"%llx:%llx:%llx:%llx:%llx:%llx:%llx:%llx",
words + 0, words + 1, words + 2, words + 3,
words + 4, words + 5, words + 6, words + 7,
words + 8, words + 9, words + 10, words + 11,
words + 12, words + 13, words + 14, words + 15);
if (err != 16) {
(void) fprintf(stderr, "invalid input format\n");
exit(1);
}
ASSERT3U(BPE_GET_LSIZE(&bp), <=, SPA_MAXBLOCKSIZE);
buf = malloc(SPA_MAXBLOCKSIZE);
if (buf == NULL) {
(void) fprintf(stderr, "out of memory\n");
exit(1);
}
err = decode_embedded_bp(&bp, buf, BPE_GET_LSIZE(&bp));
if (err != 0) {
(void) fprintf(stderr, "decode failed: %u\n", err);
exit(1);
}
zdb_dump_block_raw(buf, BPE_GET_LSIZE(&bp), 0);
free(buf);
}
2008-11-20 23:01:55 +03:00
int
main(int argc, char **argv)
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
int c;
2008-11-20 23:01:55 +03:00
struct rlimit rl = { 1024, 1024 };
spa_t *spa = NULL;
2008-11-20 23:01:55 +03:00
objset_t *os = NULL;
int dump_all = 1;
int verbose = 0;
int error = 0;
char **searchdirs = NULL;
int nsearch = 0;
char *target, *target_pool;
nvlist_t *policy = NULL;
uint64_t max_txg = UINT64_MAX;
int flags = ZFS_IMPORT_MISSING_LOG;
int rewind = ZPOOL_NEVER_REWIND;
char *spa_config_path_env;
boolean_t target_is_spa = B_TRUE;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
nvlist_t *cfg = NULL;
2008-11-20 23:01:55 +03:00
(void) setrlimit(RLIMIT_NOFILE, &rl);
(void) enable_extended_FILE_stdio(-1, -1);
dprintf_setup(&argc, argv);
/*
* If there is an environment variable SPA_CONFIG_PATH it overrides
* default spa_config_path setting. If -U flag is specified it will
* override this environment variable settings once again.
*/
spa_config_path_env = getenv("SPA_CONFIG_PATH");
if (spa_config_path_env != NULL)
spa_config_path = spa_config_path_env;
while ((c = getopt(argc, argv,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
"AbcCdDeEFGhiI:klLmMo:Op:PqRsSt:uU:vVx:X")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'b':
case 'c':
case 'C':
case 'd':
case 'D':
case 'E':
case 'G':
case 'h':
case 'i':
case 'l':
2009-07-03 02:44:48 +04:00
case 'm':
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
case 'M':
case 'O':
2008-11-20 23:01:55 +03:00
case 'R':
case 's':
case 'S':
case 'u':
2008-11-20 23:01:55 +03:00
dump_opt[c]++;
dump_all = 0;
break;
case 'A':
case 'e':
case 'F':
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
case 'k':
2009-01-16 00:59:39 +03:00
case 'L':
case 'P':
case 'q':
case 'X':
2009-01-16 00:59:39 +03:00
dump_opt[c]++;
break;
/* NB: Sort single match options below. */
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
case 'I':
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
max_inflight = strtoull(optarg, NULL, 0);
if (max_inflight == 0) {
(void) fprintf(stderr, "maximum number "
"of inflight I/Os must be greater "
"than 0\n");
usage();
}
break;
case 'o':
error = set_global_var(optarg);
if (error != 0)
usage();
break;
2008-11-20 23:01:55 +03:00
case 'p':
if (searchdirs == NULL) {
searchdirs = umem_alloc(sizeof (char *),
UMEM_NOFAIL);
} else {
char **tmp = umem_alloc((nsearch + 1) *
sizeof (char *), UMEM_NOFAIL);
bcopy(searchdirs, tmp, nsearch *
sizeof (char *));
umem_free(searchdirs,
nsearch * sizeof (char *));
searchdirs = tmp;
}
searchdirs[nsearch++] = optarg;
2008-11-20 23:01:55 +03:00
break;
2009-01-16 00:59:39 +03:00
case 't':
max_txg = strtoull(optarg, NULL, 0);
if (max_txg < TXG_INITIAL) {
2009-01-16 00:59:39 +03:00
(void) fprintf(stderr, "incorrect txg "
"specified: %s\n", optarg);
usage();
}
break;
case 'U':
spa_config_path = optarg;
if (spa_config_path[0] != '/') {
(void) fprintf(stderr,
"cachefile must be an absolute path "
"(i.e. start with a slash)\n");
usage();
}
break;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-20 00:19:24 +04:00
case 'v':
verbose++;
break;
case 'V':
flags = ZFS_IMPORT_VERBATIM;
break;
case 'x':
vn_dumpdir = optarg;
break;
2008-11-20 23:01:55 +03:00
default:
usage();
break;
}
}
if (!dump_opt['e'] && searchdirs != NULL) {
(void) fprintf(stderr, "-p option requires use of -e\n");
usage();
}
2008-11-20 23:01:55 +03:00
#if defined(_LP64)
/*
* ZDB does not typically re-read blocks; therefore limit the ARC
* to 256 MB, which can be used entirely for metadata.
*/
zfs_arc_max = zfs_arc_meta_limit = 256 * 1024 * 1024;
#endif
/*
* "zdb -c" uses checksum-verifying scrub i/os which are async reads.
* "zdb -b" uses traversal prefetch which uses async reads.
* For good performance, let several of them be active at once.
*/
zfs_vdev_async_read_max_active = 10;
/*
* Disable reference tracking for better performance.
*/
reference_tracking_enable = B_FALSE;
/*
* Do not fail spa_load when spa_load_verify fails. This is needed
* to load non-idle pools.
*/
spa_load_verify_dryrun = B_TRUE;
2008-11-20 23:01:55 +03:00
kernel_init(FREAD);
if ((g_zfs = libzfs_init()) == NULL) {
(void) fprintf(stderr, "%s", libzfs_error_init(errno));
return (1);
}
2008-11-20 23:01:55 +03:00
if (dump_all)
verbose = MAX(verbose, 1);
2008-11-20 23:01:55 +03:00
for (c = 0; c < 256; c++) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if (dump_all && strchr("AeEFklLOPRSX", c) == NULL)
2008-11-20 23:01:55 +03:00
dump_opt[c] = 1;
if (dump_opt[c])
dump_opt[c] += verbose;
}
aok = (dump_opt['A'] == 1) || (dump_opt['A'] > 2);
zfs_recover = (dump_opt['A'] > 1);
2008-11-20 23:01:55 +03:00
argc -= optind;
argv += optind;
if (argc < 2 && dump_opt['R'])
usage();
if (dump_opt['E']) {
if (argc != 1)
usage();
zdb_embedded_block(argv[0]);
return (0);
}
2008-11-20 23:01:55 +03:00
if (argc < 1) {
if (!dump_opt['e'] && dump_opt['C']) {
dump_cachefile(spa_config_path);
2008-11-20 23:01:55 +03:00
return (0);
}
usage();
}
if (dump_opt['l'])
return (dump_label(argv[0]));
2008-11-20 23:01:55 +03:00
if (dump_opt['O']) {
if (argc != 2)
usage();
dump_opt['v'] = verbose + 3;
return (dump_path(argv[0], argv[1]));
}
if (dump_opt['X'] || dump_opt['F'])
rewind = ZPOOL_DO_REWIND |
(dump_opt['X'] ? ZPOOL_EXTREME_REWIND : 0);
2008-11-20 23:01:55 +03:00
if (nvlist_alloc(&policy, NV_UNIQUE_NAME_TYPE, 0) != 0 ||
nvlist_add_uint64(policy, ZPOOL_LOAD_REQUEST_TXG, max_txg) != 0 ||
nvlist_add_uint32(policy, ZPOOL_LOAD_REWIND_POLICY, rewind) != 0)
fatal("internal error: %s", strerror(ENOMEM));
2008-11-20 23:01:55 +03:00
error = 0;
target = argv[0];
2008-11-20 23:01:55 +03:00
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
char *checkpoint_pool = NULL;
char *checkpoint_target = NULL;
if (dump_opt['k']) {
checkpoint_pool = import_checkpointed_state(target, cfg,
&checkpoint_target);
if (checkpoint_target != NULL)
target = checkpoint_target;
}
if (strpbrk(target, "/@") != NULL) {
size_t targetlen;
target_pool = strdup(target);
*strpbrk(target_pool, "/@") = '\0';
target_is_spa = B_FALSE;
targetlen = strlen(target);
if (targetlen && target[targetlen - 1] == '/')
target[targetlen - 1] = '\0';
} else {
target_pool = target;
}
if (dump_opt['e']) {
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
importargs_t args = { 0 };
2008-11-20 23:01:55 +03:00
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
args.paths = nsearch;
args.path = searchdirs;
args.can_be_active = B_TRUE;
error = zpool_tryimport(g_zfs, target_pool, &cfg, &args);
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
if (error == 0) {
if (nvlist_add_nvlist(cfg,
ZPOOL_LOAD_POLICY, policy) != 0) {
fatal("can't open '%s': %s",
target, strerror(ENOMEM));
}
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
if (dump_opt['C'] > 1) {
(void) printf("\nConfiguration for import:\n");
dump_nvlist(cfg, 8);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
/*
* Disable the activity check to allow examination of
* active pools.
*/
error = spa_import(target_pool, cfg, NULL,
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
flags | ZFS_IMPORT_SKIP_MMP);
2008-11-20 23:01:55 +03:00
}
}
if (target_pool != target)
free(target_pool);
if (error == 0) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if (dump_opt['k'] && (target_is_spa || dump_opt['R'])) {
ASSERT(checkpoint_pool != NULL);
ASSERT(checkpoint_target == NULL);
error = spa_open(checkpoint_pool, &spa, FTAG);
if (error != 0) {
fatal("Tried to open pool \"%s\" but "
"spa_open() failed with error %d\n",
checkpoint_pool, error);
}
} else if (target_is_spa || dump_opt['R']) {
zdb_set_skip_mmp(target);
error = spa_open_rewind(target, &spa, FTAG, policy,
NULL);
if (error) {
/*
* If we're missing the log device then
* try opening the pool after clearing the
* log state.
*/
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(target)) != NULL &&
spa->spa_log_state == SPA_LOG_MISSING) {
spa->spa_log_state = SPA_LOG_CLEAR;
error = 0;
}
mutex_exit(&spa_namespace_lock);
if (!error) {
error = spa_open_rewind(target, &spa,
FTAG, policy, NULL);
}
}
} else {
zdb_set_skip_mmp(target);
error = open_objset(target, DMU_OST_ANY, FTAG, &os);
if (error == 0)
spa = dmu_objset_spa(os);
}
2008-11-20 23:01:55 +03:00
}
nvlist_free(policy);
2008-11-20 23:01:55 +03:00
if (error)
fatal("can't open '%s': %s", target, strerror(error));
2008-11-20 23:01:55 +03:00
/*
* Set the pool failure mode to panic in order to prevent the pool
* from suspending. A suspended I/O will have no way to resume and
* can prevent the zdb(8) command from terminating as expected.
*/
if (spa != NULL)
spa->spa_failmode = ZIO_FAILURE_MODE_PANIC;
2008-11-20 23:01:55 +03:00
argv++;
argc--;
if (!dump_opt['R']) {
if (argc > 0) {
zopt_objects = argc;
zopt_object = calloc(zopt_objects, sizeof (uint64_t));
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (unsigned i = 0; i < zopt_objects; i++) {
errno = 0;
zopt_object[i] = strtoull(argv[i], NULL, 0);
if (zopt_object[i] == 0 && errno != 0)
fatal("bad number %s: %s",
argv[i], strerror(errno));
}
2008-11-20 23:01:55 +03:00
}
if (os != NULL) {
dump_dir(os);
} else if (zopt_objects > 0 && !dump_opt['m']) {
dump_dir(spa->spa_meta_objset);
} else {
dump_zpool(spa);
}
2008-11-20 23:01:55 +03:00
} else {
flagbits['b'] = ZDB_FLAG_PRINT_BLKPTR;
flagbits['c'] = ZDB_FLAG_CHECKSUM;
flagbits['d'] = ZDB_FLAG_DECOMPRESS;
flagbits['e'] = ZDB_FLAG_BSWAP;
flagbits['g'] = ZDB_FLAG_GBH;
flagbits['i'] = ZDB_FLAG_INDIRECT;
flagbits['p'] = ZDB_FLAG_PHYS;
flagbits['r'] = ZDB_FLAG_RAW;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
for (int i = 0; i < argc; i++)
zdb_read_block(argv[i], spa);
2008-11-20 23:01:55 +03:00
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
if (dump_opt['k']) {
free(checkpoint_pool);
if (!target_is_spa)
free(checkpoint_target);
}
if (os != NULL)
close_objset(os, FTAG);
else
spa_close(spa, FTAG);
2008-11-20 23:01:55 +03:00
fuid_table_destroy();
dump_debug_buffer();
2008-11-20 23:01:55 +03:00
libzfs_fini(g_zfs);
kernel_fini();
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 20:35:20 +03:00
return (error);
2008-11-20 23:01:55 +03:00
}