mirror_zfs/module/zfs/dsl_deadlist.c

544 lines
14 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012 by Delphix. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
*/
#include <sys/dsl_dataset.h>
#include <sys/dmu.h>
#include <sys/refcount.h>
#include <sys/zap.h>
#include <sys/zfs_context.h>
#include <sys/dsl_pool.h>
/*
* Deadlist concurrency:
*
* Deadlists can only be modified from the syncing thread.
*
* Except for dsl_deadlist_insert(), it can only be modified with the
* dp_config_rwlock held with RW_WRITER.
*
* The accessors (dsl_deadlist_space() and dsl_deadlist_space_range()) can
* be called concurrently, from open context, with the dl_config_rwlock held
* with RW_READER.
*
* Therefore, we only need to provide locking between dsl_deadlist_insert() and
* the accessors, protecting:
* dl_phys->dl_used,comp,uncomp
* and protecting the dl_tree from being loaded.
* The locking is provided by dl_lock. Note that locking on the bpobj_t
* provides its own locking, and dl_oldfmt is immutable.
*/
static int
dsl_deadlist_compare(const void *arg1, const void *arg2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
const dsl_deadlist_entry_t *dle1 = (const dsl_deadlist_entry_t *)arg1;
const dsl_deadlist_entry_t *dle2 = (const dsl_deadlist_entry_t *)arg2;
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
return (AVL_CMP(dle1->dle_mintxg, dle2->dle_mintxg));
}
static void
dsl_deadlist_load_tree(dsl_deadlist_t *dl)
{
zap_cursor_t zc;
zap_attribute_t za;
ASSERT(!dl->dl_oldfmt);
if (dl->dl_havetree)
return;
avl_create(&dl->dl_tree, dsl_deadlist_compare,
sizeof (dsl_deadlist_entry_t),
offsetof(dsl_deadlist_entry_t, dle_node));
for (zap_cursor_init(&zc, dl->dl_os, dl->dl_object);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
dsl_deadlist_entry_t *dle;
dle = kmem_alloc(sizeof (*dle), KM_SLEEP);
dle->dle_mintxg = strtonum(za.za_name, NULL);
VERIFY3U(0, ==, bpobj_open(&dle->dle_bpobj, dl->dl_os,
za.za_first_integer));
avl_add(&dl->dl_tree, dle);
}
zap_cursor_fini(&zc);
dl->dl_havetree = B_TRUE;
}
void
dsl_deadlist_open(dsl_deadlist_t *dl, objset_t *os, uint64_t object)
{
dmu_object_info_t doi;
mutex_init(&dl->dl_lock, NULL, MUTEX_DEFAULT, NULL);
dl->dl_os = os;
dl->dl_object = object;
VERIFY3U(0, ==, dmu_bonus_hold(os, object, dl, &dl->dl_dbuf));
dmu_object_info_from_db(dl->dl_dbuf, &doi);
if (doi.doi_type == DMU_OT_BPOBJ) {
dmu_buf_rele(dl->dl_dbuf, dl);
dl->dl_dbuf = NULL;
dl->dl_oldfmt = B_TRUE;
VERIFY3U(0, ==, bpobj_open(&dl->dl_bpobj, os, object));
return;
}
dl->dl_oldfmt = B_FALSE;
dl->dl_phys = dl->dl_dbuf->db_data;
dl->dl_havetree = B_FALSE;
}
void
dsl_deadlist_close(dsl_deadlist_t *dl)
{
void *cookie = NULL;
dsl_deadlist_entry_t *dle;
dl->dl_os = NULL;
if (dl->dl_oldfmt) {
dl->dl_oldfmt = B_FALSE;
bpobj_close(&dl->dl_bpobj);
return;
}
if (dl->dl_havetree) {
while ((dle = avl_destroy_nodes(&dl->dl_tree, &cookie))
!= NULL) {
bpobj_close(&dle->dle_bpobj);
kmem_free(dle, sizeof (*dle));
}
avl_destroy(&dl->dl_tree);
}
dmu_buf_rele(dl->dl_dbuf, dl);
mutex_destroy(&dl->dl_lock);
dl->dl_dbuf = NULL;
dl->dl_phys = NULL;
}
uint64_t
dsl_deadlist_alloc(objset_t *os, dmu_tx_t *tx)
{
if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_DEADLISTS)
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
return (bpobj_alloc(os, SPA_OLD_MAXBLOCKSIZE, tx));
return (zap_create(os, DMU_OT_DEADLIST, DMU_OT_DEADLIST_HDR,
sizeof (dsl_deadlist_phys_t), tx));
}
void
dsl_deadlist_free(objset_t *os, uint64_t dlobj, dmu_tx_t *tx)
{
dmu_object_info_t doi;
zap_cursor_t zc;
zap_attribute_t za;
VERIFY3U(0, ==, dmu_object_info(os, dlobj, &doi));
if (doi.doi_type == DMU_OT_BPOBJ) {
bpobj_free(os, dlobj, tx);
return;
}
for (zap_cursor_init(&zc, os, dlobj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
uint64_t obj = za.za_first_integer;
if (obj == dmu_objset_pool(os)->dp_empty_bpobj)
bpobj_decr_empty(os, tx);
else
bpobj_free(os, obj, tx);
}
zap_cursor_fini(&zc);
VERIFY3U(0, ==, dmu_object_free(os, dlobj, tx));
}
static void
dle_enqueue(dsl_deadlist_t *dl, dsl_deadlist_entry_t *dle,
const blkptr_t *bp, dmu_tx_t *tx)
{
if (dle->dle_bpobj.bpo_object ==
dmu_objset_pool(dl->dl_os)->dp_empty_bpobj) {
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
uint64_t obj = bpobj_alloc(dl->dl_os, SPA_OLD_MAXBLOCKSIZE, tx);
bpobj_close(&dle->dle_bpobj);
bpobj_decr_empty(dl->dl_os, tx);
VERIFY3U(0, ==, bpobj_open(&dle->dle_bpobj, dl->dl_os, obj));
VERIFY3U(0, ==, zap_update_int_key(dl->dl_os, dl->dl_object,
dle->dle_mintxg, obj, tx));
}
bpobj_enqueue(&dle->dle_bpobj, bp, tx);
}
static void
dle_enqueue_subobj(dsl_deadlist_t *dl, dsl_deadlist_entry_t *dle,
uint64_t obj, dmu_tx_t *tx)
{
if (dle->dle_bpobj.bpo_object !=
dmu_objset_pool(dl->dl_os)->dp_empty_bpobj) {
bpobj_enqueue_subobj(&dle->dle_bpobj, obj, tx);
} else {
bpobj_close(&dle->dle_bpobj);
bpobj_decr_empty(dl->dl_os, tx);
VERIFY3U(0, ==, bpobj_open(&dle->dle_bpobj, dl->dl_os, obj));
VERIFY3U(0, ==, zap_update_int_key(dl->dl_os, dl->dl_object,
dle->dle_mintxg, obj, tx));
}
}
void
dsl_deadlist_insert(dsl_deadlist_t *dl, const blkptr_t *bp, dmu_tx_t *tx)
{
dsl_deadlist_entry_t dle_tofind;
dsl_deadlist_entry_t *dle;
avl_index_t where;
if (dl->dl_oldfmt) {
bpobj_enqueue(&dl->dl_bpobj, bp, tx);
return;
}
dsl_deadlist_load_tree(dl);
dmu_buf_will_dirty(dl->dl_dbuf, tx);
mutex_enter(&dl->dl_lock);
dl->dl_phys->dl_used +=
bp_get_dsize_sync(dmu_objset_spa(dl->dl_os), bp);
dl->dl_phys->dl_comp += BP_GET_PSIZE(bp);
dl->dl_phys->dl_uncomp += BP_GET_UCSIZE(bp);
mutex_exit(&dl->dl_lock);
dle_tofind.dle_mintxg = bp->blk_birth;
dle = avl_find(&dl->dl_tree, &dle_tofind, &where);
if (dle == NULL)
dle = avl_nearest(&dl->dl_tree, where, AVL_BEFORE);
else
dle = AVL_PREV(&dl->dl_tree, dle);
if (dle == NULL) {
zfs_panic_recover("blkptr at %p has invalid BLK_BIRTH %llu",
bp, (longlong_t)bp->blk_birth);
dle = avl_first(&dl->dl_tree);
}
ASSERT3P(dle, !=, NULL);
dle_enqueue(dl, dle, bp, tx);
}
/*
* Insert new key in deadlist, which must be > all current entries.
* mintxg is not inclusive.
*/
void
dsl_deadlist_add_key(dsl_deadlist_t *dl, uint64_t mintxg, dmu_tx_t *tx)
{
uint64_t obj;
dsl_deadlist_entry_t *dle;
if (dl->dl_oldfmt)
return;
dsl_deadlist_load_tree(dl);
dle = kmem_alloc(sizeof (*dle), KM_SLEEP);
dle->dle_mintxg = mintxg;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
obj = bpobj_alloc_empty(dl->dl_os, SPA_OLD_MAXBLOCKSIZE, tx);
VERIFY3U(0, ==, bpobj_open(&dle->dle_bpobj, dl->dl_os, obj));
avl_add(&dl->dl_tree, dle);
VERIFY3U(0, ==, zap_add_int_key(dl->dl_os, dl->dl_object,
mintxg, obj, tx));
}
/*
* Remove this key, merging its entries into the previous key.
*/
void
dsl_deadlist_remove_key(dsl_deadlist_t *dl, uint64_t mintxg, dmu_tx_t *tx)
{
dsl_deadlist_entry_t dle_tofind;
dsl_deadlist_entry_t *dle, *dle_prev;
if (dl->dl_oldfmt)
return;
dsl_deadlist_load_tree(dl);
dle_tofind.dle_mintxg = mintxg;
dle = avl_find(&dl->dl_tree, &dle_tofind, NULL);
dle_prev = AVL_PREV(&dl->dl_tree, dle);
dle_enqueue_subobj(dl, dle_prev, dle->dle_bpobj.bpo_object, tx);
avl_remove(&dl->dl_tree, dle);
bpobj_close(&dle->dle_bpobj);
kmem_free(dle, sizeof (*dle));
VERIFY3U(0, ==, zap_remove_int(dl->dl_os, dl->dl_object, mintxg, tx));
}
/*
* Walk ds's snapshots to regenerate generate ZAP & AVL.
*/
static void
dsl_deadlist_regenerate(objset_t *os, uint64_t dlobj,
uint64_t mrs_obj, dmu_tx_t *tx)
{
dsl_deadlist_t dl;
dsl_pool_t *dp = dmu_objset_pool(os);
dsl_deadlist_open(&dl, os, dlobj);
if (dl.dl_oldfmt) {
dsl_deadlist_close(&dl);
return;
}
while (mrs_obj != 0) {
dsl_dataset_t *ds;
VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, mrs_obj, FTAG, &ds));
dsl_deadlist_add_key(&dl,
dsl_dataset_phys(ds)->ds_prev_snap_txg, tx);
mrs_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
dsl_dataset_rele(ds, FTAG);
}
dsl_deadlist_close(&dl);
}
uint64_t
dsl_deadlist_clone(dsl_deadlist_t *dl, uint64_t maxtxg,
uint64_t mrs_obj, dmu_tx_t *tx)
{
dsl_deadlist_entry_t *dle;
uint64_t newobj;
newobj = dsl_deadlist_alloc(dl->dl_os, tx);
if (dl->dl_oldfmt) {
dsl_deadlist_regenerate(dl->dl_os, newobj, mrs_obj, tx);
return (newobj);
}
dsl_deadlist_load_tree(dl);
for (dle = avl_first(&dl->dl_tree); dle;
dle = AVL_NEXT(&dl->dl_tree, dle)) {
uint64_t obj;
if (dle->dle_mintxg >= maxtxg)
break;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
obj = bpobj_alloc_empty(dl->dl_os, SPA_OLD_MAXBLOCKSIZE, tx);
VERIFY3U(0, ==, zap_add_int_key(dl->dl_os, newobj,
dle->dle_mintxg, obj, tx));
}
return (newobj);
}
void
dsl_deadlist_space(dsl_deadlist_t *dl,
uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
{
if (dl->dl_oldfmt) {
VERIFY3U(0, ==, bpobj_space(&dl->dl_bpobj,
usedp, compp, uncompp));
return;
}
mutex_enter(&dl->dl_lock);
*usedp = dl->dl_phys->dl_used;
*compp = dl->dl_phys->dl_comp;
*uncompp = dl->dl_phys->dl_uncomp;
mutex_exit(&dl->dl_lock);
}
/*
* return space used in the range (mintxg, maxtxg].
* Includes maxtxg, does not include mintxg.
* mintxg and maxtxg must both be keys in the deadlist (unless maxtxg is
* larger than any bp in the deadlist (eg. UINT64_MAX)).
*/
void
dsl_deadlist_space_range(dsl_deadlist_t *dl, uint64_t mintxg, uint64_t maxtxg,
uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
{
dsl_deadlist_entry_t *dle;
dsl_deadlist_entry_t dle_tofind;
avl_index_t where;
if (dl->dl_oldfmt) {
VERIFY3U(0, ==, bpobj_space_range(&dl->dl_bpobj,
mintxg, maxtxg, usedp, compp, uncompp));
return;
}
*usedp = *compp = *uncompp = 0;
mutex_enter(&dl->dl_lock);
dsl_deadlist_load_tree(dl);
dle_tofind.dle_mintxg = mintxg;
dle = avl_find(&dl->dl_tree, &dle_tofind, &where);
/*
* If we don't find this mintxg, there shouldn't be anything
* after it either.
*/
ASSERT(dle != NULL ||
avl_nearest(&dl->dl_tree, where, AVL_AFTER) == NULL);
for (; dle && dle->dle_mintxg < maxtxg;
dle = AVL_NEXT(&dl->dl_tree, dle)) {
uint64_t used, comp, uncomp;
VERIFY3U(0, ==, bpobj_space(&dle->dle_bpobj,
&used, &comp, &uncomp));
*usedp += used;
*compp += comp;
*uncompp += uncomp;
}
mutex_exit(&dl->dl_lock);
}
static void
dsl_deadlist_insert_bpobj(dsl_deadlist_t *dl, uint64_t obj, uint64_t birth,
dmu_tx_t *tx)
{
dsl_deadlist_entry_t dle_tofind;
dsl_deadlist_entry_t *dle;
avl_index_t where;
uint64_t used, comp, uncomp;
bpobj_t bpo;
VERIFY3U(0, ==, bpobj_open(&bpo, dl->dl_os, obj));
VERIFY3U(0, ==, bpobj_space(&bpo, &used, &comp, &uncomp));
bpobj_close(&bpo);
dsl_deadlist_load_tree(dl);
dmu_buf_will_dirty(dl->dl_dbuf, tx);
mutex_enter(&dl->dl_lock);
dl->dl_phys->dl_used += used;
dl->dl_phys->dl_comp += comp;
dl->dl_phys->dl_uncomp += uncomp;
mutex_exit(&dl->dl_lock);
dle_tofind.dle_mintxg = birth;
dle = avl_find(&dl->dl_tree, &dle_tofind, &where);
if (dle == NULL)
dle = avl_nearest(&dl->dl_tree, where, AVL_BEFORE);
dle_enqueue_subobj(dl, dle, obj, tx);
}
static int
dsl_deadlist_insert_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
dsl_deadlist_t *dl = arg;
dsl_deadlist_insert(dl, bp, tx);
return (0);
}
/*
* Merge the deadlist pointed to by 'obj' into dl. obj will be left as
* an empty deadlist.
*/
void
dsl_deadlist_merge(dsl_deadlist_t *dl, uint64_t obj, dmu_tx_t *tx)
{
zap_cursor_t zc;
zap_attribute_t za;
dmu_buf_t *bonus;
dsl_deadlist_phys_t *dlp;
dmu_object_info_t doi;
VERIFY3U(0, ==, dmu_object_info(dl->dl_os, obj, &doi));
if (doi.doi_type == DMU_OT_BPOBJ) {
bpobj_t bpo;
VERIFY3U(0, ==, bpobj_open(&bpo, dl->dl_os, obj));
VERIFY3U(0, ==, bpobj_iterate(&bpo,
dsl_deadlist_insert_cb, dl, tx));
bpobj_close(&bpo);
return;
}
for (zap_cursor_init(&zc, dl->dl_os, obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
uint64_t mintxg = strtonum(za.za_name, NULL);
dsl_deadlist_insert_bpobj(dl, za.za_first_integer, mintxg, tx);
VERIFY3U(0, ==, zap_remove_int(dl->dl_os, obj, mintxg, tx));
}
zap_cursor_fini(&zc);
VERIFY3U(0, ==, dmu_bonus_hold(dl->dl_os, obj, FTAG, &bonus));
dlp = bonus->db_data;
dmu_buf_will_dirty(bonus, tx);
bzero(dlp, sizeof (*dlp));
dmu_buf_rele(bonus, FTAG);
}
/*
* Remove entries on dl that are >= mintxg, and put them on the bpobj.
*/
void
dsl_deadlist_move_bpobj(dsl_deadlist_t *dl, bpobj_t *bpo, uint64_t mintxg,
dmu_tx_t *tx)
{
dsl_deadlist_entry_t dle_tofind;
dsl_deadlist_entry_t *dle;
avl_index_t where;
ASSERT(!dl->dl_oldfmt);
dmu_buf_will_dirty(dl->dl_dbuf, tx);
dsl_deadlist_load_tree(dl);
dle_tofind.dle_mintxg = mintxg;
dle = avl_find(&dl->dl_tree, &dle_tofind, &where);
if (dle == NULL)
dle = avl_nearest(&dl->dl_tree, where, AVL_AFTER);
while (dle) {
uint64_t used, comp, uncomp;
dsl_deadlist_entry_t *dle_next;
bpobj_enqueue_subobj(bpo, dle->dle_bpobj.bpo_object, tx);
VERIFY3U(0, ==, bpobj_space(&dle->dle_bpobj,
&used, &comp, &uncomp));
mutex_enter(&dl->dl_lock);
ASSERT3U(dl->dl_phys->dl_used, >=, used);
ASSERT3U(dl->dl_phys->dl_comp, >=, comp);
ASSERT3U(dl->dl_phys->dl_uncomp, >=, uncomp);
dl->dl_phys->dl_used -= used;
dl->dl_phys->dl_comp -= comp;
dl->dl_phys->dl_uncomp -= uncomp;
mutex_exit(&dl->dl_lock);
VERIFY3U(0, ==, zap_remove_int(dl->dl_os, dl->dl_object,
dle->dle_mintxg, tx));
dle_next = AVL_NEXT(&dl->dl_tree, dle);
avl_remove(&dl->dl_tree, dle);
bpobj_close(&dle->dle_bpobj);
kmem_free(dle, sizeof (*dle));
dle = dle_next;
}
}