mirror_zfs/module/spl/spl-generic.c

467 lines
11 KiB
C
Raw Normal View History

/*
* This file is part of the SPL: Solaris Porting Layer.
*
* Copyright (c) 2008 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory
* Written by:
* Brian Behlendorf <behlendorf1@llnl.gov>,
* Herb Wartens <wartens2@llnl.gov>,
* Jim Garlick <garlick@llnl.gov>
* UCRL-CODE-235197
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <sys/sysmacros.h>
#include <sys/systeminfo.h>
#include <sys/vmsystm.h>
#include <sys/vnode.h>
#include <sys/kmem.h>
#include <sys/mutex.h>
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
#include <sys/rwlock.h>
2009-01-06 02:08:03 +03:00
#include <sys/taskq.h>
#include <sys/debug.h>
#include <sys/proc.h>
#include <sys/kstat.h>
#include <sys/utsname.h>
#include <sys/file.h>
#include <linux/kmod.h>
#ifdef DEBUG_SUBSYSTEM
#undef DEBUG_SUBSYSTEM
#endif
#define DEBUG_SUBSYSTEM S_GENERIC
char spl_version[16] = "SPL v" SPL_META_VERSION;
long spl_hostid = 0;
EXPORT_SYMBOL(spl_hostid);
char hw_serial[HW_HOSTID_LEN] = "<none>";
EXPORT_SYMBOL(hw_serial);
int p0 = 0;
EXPORT_SYMBOL(p0);
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
#ifndef HAVE_KALLSYMS_LOOKUP_NAME
kallsyms_lookup_name_t spl_kallsyms_lookup_name_fn = SYMBOL_POISON;
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
#endif
int
highbit(unsigned long i)
{
register int h = 1;
ENTRY;
if (i == 0)
RETURN(0);
#if BITS_PER_LONG == 64
if (i & 0xffffffff00000000ul) {
h += 32; i >>= 32;
}
#endif
if (i & 0xffff0000) {
h += 16; i >>= 16;
}
if (i & 0xff00) {
h += 8; i >>= 8;
}
if (i & 0xf0) {
h += 4; i >>= 4;
}
if (i & 0xc) {
h += 2; i >>= 2;
}
if (i & 0x2) {
h += 1;
}
RETURN(h);
}
EXPORT_SYMBOL(highbit);
/*
* Implementation of 64 bit division for 32-bit machines.
*/
#if BITS_PER_LONG == 32
uint64_t __udivdi3(uint64_t dividend, uint64_t divisor)
{
#if defined(HAVE_DIV64_64) /* 2.6.22 - 2.6.25 API */
return div64_64(dividend, divisor);
#elif defined(HAVE_DIV64_U64) /* 2.6.26 - 2.6.x API */
return div64_u64(dividend, divisor);
#else
/* Implementation from 2.6.30 kernel */
uint32_t high, d;
high = divisor >> 32;
if (high) {
unsigned int shift = fls(high);
d = divisor >> shift;
dividend >>= shift;
} else
d = divisor;
return do_div(dividend, d);
#endif /* HAVE_DIV64_64, HAVE_DIV64_U64 */
}
EXPORT_SYMBOL(__udivdi3);
/*
* Implementation of 64 bit modulo for 32-bit machines.
*/
uint64_t __umoddi3(uint64_t dividend, uint64_t divisor)
{
return dividend - divisor * (dividend / divisor);
}
EXPORT_SYMBOL(__umoddi3);
#endif /* BITS_PER_LONG */
/* NOTE: The strtoxx behavior is solely based on my reading of the Solaris
* ddi_strtol(9F) man page. I have not verified the behavior of these
* functions against their Solaris counterparts. It is possible that I
* may have misinterpreted the man page or the man page is incorrect.
*/
2008-12-06 03:23:57 +03:00
int ddi_strtoul(const char *, char **, int, unsigned long *);
int ddi_strtol(const char *, char **, int, long *);
int ddi_strtoull(const char *, char **, int, unsigned long long *);
int ddi_strtoll(const char *, char **, int, long long *);
#define define_ddi_strtoux(type, valtype) \
int ddi_strtou##type(const char *str, char **endptr, \
int base, valtype *result) \
2008-12-06 03:23:57 +03:00
{ \
valtype last_value, value = 0; \
char *ptr = (char *)str; \
int flag = 1, digit; \
\
if (strlen(ptr) == 0) \
return EINVAL; \
\
/* Auto-detect base based on prefix */ \
if (!base) { \
if (str[0] == '0') { \
if (tolower(str[1])=='x' && isxdigit(str[2])) { \
base = 16; /* hex */ \
ptr += 2; \
} else if (str[1] >= '0' && str[1] < 8) { \
base = 8; /* octal */ \
ptr += 1; \
} else { \
return EINVAL; \
} \
} else { \
base = 10; /* decimal */ \
} \
} \
\
while (1) { \
if (isdigit(*ptr)) \
digit = *ptr - '0'; \
else if (isalpha(*ptr)) \
digit = tolower(*ptr) - 'a' + 10; \
else \
break; \
\
if (digit >= base) \
break; \
2008-12-06 03:23:57 +03:00
\
last_value = value; \
value = value * base + digit; \
if (last_value > value) /* Overflow */ \
return ERANGE; \
2008-12-06 03:23:57 +03:00
\
flag = 1; \
ptr++; \
2008-12-06 03:23:57 +03:00
} \
\
if (flag) \
*result = value; \
\
if (endptr) \
*endptr = (char *)(flag ? ptr : str); \
\
return 0; \
2008-12-06 03:23:57 +03:00
} \
#define define_ddi_strtox(type, valtype) \
int ddi_strto##type(const char *str, char **endptr, \
int base, valtype *result) \
{ \
int rc; \
2008-12-06 03:23:57 +03:00
\
if (*str == '-') { \
rc = ddi_strtou##type(str + 1, endptr, base, result); \
if (!rc) { \
if (*endptr == str + 1) \
*endptr = (char *)str; \
else \
*result = -*result; \
} \
2008-12-06 03:23:57 +03:00
} else { \
rc = ddi_strtou##type(str, endptr, base, result); \
2008-12-06 03:23:57 +03:00
} \
\
return rc; \
}
2008-12-06 03:23:57 +03:00
define_ddi_strtoux(l, unsigned long)
define_ddi_strtox(l, long)
define_ddi_strtoux(ll, unsigned long long)
define_ddi_strtox(ll, long long)
EXPORT_SYMBOL(ddi_strtoul);
2008-12-06 03:23:57 +03:00
EXPORT_SYMBOL(ddi_strtol);
EXPORT_SYMBOL(ddi_strtoll);
EXPORT_SYMBOL(ddi_strtoull);
int
ddi_copyin(const void *from, void *to, size_t len, int flags)
{
/* Fake ioctl() issued by kernel, 'from' is a kernel address */
if (flags & FKIOCTL) {
memcpy(to, from, len);
return 0;
}
return copyin(from, to, len);
}
EXPORT_SYMBOL(ddi_copyin);
int
ddi_copyout(const void *from, void *to, size_t len, int flags)
{
/* Fake ioctl() issued by kernel, 'from' is a kernel address */
if (flags & FKIOCTL) {
memcpy(to, from, len);
return 0;
}
return copyout(from, to, len);
}
EXPORT_SYMBOL(ddi_copyout);
Reimplement rwlocks for Linux lock profiling/analysis. It turns out that the previous rwlock implementation worked well but did not integrate properly with the upstream kernel lock profiling/ analysis tools. This is a major problem since it would be awfully nice to be able to use the automatic lock checker and profiler. The problem is that the upstream lock tools use the pre-processor to create a lock class for each uniquely named locked. Since the rwsem was embedded in a wrapper structure the name was always the same. The effect was that we only ended up with one lock class for the entire SPL which caused the lock dependency checker to flag nearly everything as a possible deadlock. The solution was to directly map a krwlock to a Linux rwsem using a typedef there by eliminating the wrapper structure. This was not done initially because the rwsem implementation is specific to the arch. To fully implement the Solaris krwlock API using only the provided rwsem API is not possible. It can only be done by directly accessing some of the internal data member of the rwsem structure. For example, the Linux API provides a different function for dropping a reader vs writer lock. Whereas the Solaris API uses the same function and the caller does not pass in what type of lock it is. This means to properly drop the lock we need to determine if the lock is currently a reader or writer lock. Then we need to call the proper Linux API function. Unfortunately, there is no provided API for this so we must extracted this information directly from arch specific lock implementation. This is all do able, and what I did, but it does complicate things considerably. The good news is that in addition to the profiling benefits of this change. We may see performance improvements due to slightly reduced overhead when creating rwlocks and manipulating them. The only function I was forced to sacrafice was rw_owner() because this information is simply not stored anywhere in the rwsem. Luckily this appears not to be a commonly used function on Solaris, and it is my understanding it is mainly used for debugging anyway. In addition to the core rwlock changes, extensive updates were made to the rwlock regression tests. Each class of test was extended to provide more API coverage and to be more rigerous in checking for misbehavior. This is a pretty significant change and with that in mind I have been careful to validate it on several platforms before committing. The full SPLAT regression test suite was run numberous times on all of the following platforms. This includes various kernels ranging from 2.6.16 to 2.6.29. - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-19 03:09:47 +04:00
#ifndef HAVE_PUT_TASK_STRUCT
/*
* This is only a stub function which should never be used. The SPL should
* never be putting away the last reference on a task structure so this will
* not be called. However, we still need to define it so the module does not
* have undefined symbol at load time. That all said if this impossible
* thing does somehow happen SBUG() immediately so we know about it.
*/
void
__put_task_struct(struct task_struct *t)
{
SBUG();
}
EXPORT_SYMBOL(__put_task_struct);
#endif /* HAVE_PUT_TASK_STRUCT */
struct new_utsname *__utsname(void)
{
#ifdef HAVE_INIT_UTSNAME
return init_utsname();
#else
return &system_utsname;
#endif
}
EXPORT_SYMBOL(__utsname);
static int
set_hostid(void)
{
char sh_path[] = "/bin/sh";
char *argv[] = { sh_path,
"-c",
"/usr/bin/hostid >/proc/sys/kernel/spl/hostid",
NULL };
char *envp[] = { "HOME=/",
"TERM=linux",
"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
NULL };
int rc;
/* Doing address resolution in the kernel is tricky and just
* not a good idea in general. So to set the proper 'hw_serial'
* use the usermodehelper support to ask '/bin/sh' to run
* '/usr/bin/hostid' and redirect the result to /proc/sys/spl/hostid
* for us to use. It's a horrific solution but it will do for now.
*/
rc = call_usermodehelper(sh_path, argv, envp, 1);
if (rc)
printk("SPL: Failed user helper '%s %s %s', rc = %d\n",
argv[0], argv[1], argv[2], rc);
return rc;
}
uint32_t
zone_get_hostid(void *zone)
{
unsigned long hostid;
/* Only the global zone is supported */
ASSERT(zone == NULL);
if (ddi_strtoul(hw_serial, NULL, HW_HOSTID_LEN-1, &hostid) != 0)
return HW_INVALID_HOSTID;
return (uint32_t)hostid;
}
EXPORT_SYMBOL(zone_get_hostid);
#ifndef HAVE_KALLSYMS_LOOKUP_NAME
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
/*
* Because kallsyms_lookup_name() is no longer exported in the
* mainline kernel we are forced to resort to somewhat drastic
* measures. This function replaces the functionality by performing
* an upcall to user space where /proc/kallsyms is consulted for
* the requested address.
*/
#define GET_KALLSYMS_ADDR_CMD \
"awk '{ if ( $3 == \"kallsyms_lookup_name\") { print $1 } }' " \
"/proc/kallsyms >/proc/sys/kernel/spl/kallsyms_lookup_name"
static int
set_kallsyms_lookup_name(void)
{
char sh_path[] = "/bin/sh";
char *argv[] = { sh_path,
"-c",
GET_KALLSYMS_ADDR_CMD,
NULL };
char *envp[] = { "HOME=/",
"TERM=linux",
"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
NULL };
int rc;
rc = call_usermodehelper(sh_path, argv, envp, 1);
if (rc)
printk("SPL: Failed user helper '%s %s %s', rc = %d\n",
argv[0], argv[1], argv[2], rc);
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
return rc;
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
}
#endif
static int
__init spl_init(void)
{
int rc = 0;
if ((rc = debug_init()))
return rc;
if ((rc = spl_kmem_init()))
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
GOTO(out1, rc);
if ((rc = spl_mutex_init()))
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
GOTO(out2, rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
if ((rc = spl_rw_init()))
GOTO(out3, rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
if ((rc = spl_taskq_init()))
GOTO(out4, rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
if ((rc = vn_init()))
GOTO(out5, rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
if ((rc = proc_init()))
2009-01-06 02:08:03 +03:00
GOTO(out6, rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
if ((rc = kstat_init()))
GOTO(out7, rc);
if ((rc = set_hostid()))
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
GOTO(out8, rc = -EADDRNOTAVAIL);
#ifndef HAVE_KALLSYMS_LOOKUP_NAME
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
if ((rc = set_kallsyms_lookup_name()))
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
GOTO(out8, rc = -EADDRNOTAVAIL);
#endif /* HAVE_KALLSYMS_LOOKUP_NAME */
if ((rc = spl_kmem_init_kallsyms_lookup()))
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
GOTO(out8, rc);
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
printk("SPL: Loaded Solaris Porting Layer v%s\n", SPL_META_VERSION);
RETURN(rc);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out8:
kstat_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out7:
proc_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out6:
vn_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out5:
2009-01-06 02:08:03 +03:00
spl_taskq_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out4:
spl_rw_fini();
out3:
spl_mutex_fini();
out2:
spl_kmem_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
out1:
debug_fini();
printk("SPL: Failed to Load Solaris Porting Layer v%s, "
"rc = %d\n", SPL_META_VERSION, rc);
return rc;
}
static void
spl_fini(void)
{
ENTRY;
printk("SPL: Unloaded Solaris Porting Layer v%s\n", SPL_META_VERSION);
kstat_fini();
proc_fini();
vn_fini();
2009-01-06 02:08:03 +03:00
spl_taskq_fini();
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-26 01:14:35 +04:00
spl_rw_fini();
spl_mutex_fini();
spl_kmem_fini();
debug_fini();
}
/* Called when a dependent module is loaded */
void
spl_setup(void)
{
/*
* At module load time the pwd is set to '/' on a Solaris system.
* On a Linux system will be set to whatever directory the caller
* was in when executing insmod/modprobe.
*/
vn_set_pwd("/");
}
EXPORT_SYMBOL(spl_setup);
/* Called when a dependent module is unloaded */
void
spl_cleanup(void)
{
}
EXPORT_SYMBOL(spl_cleanup);
module_init(spl_init);
module_exit(spl_fini);
MODULE_AUTHOR("Lawrence Livermore National Labs");
MODULE_DESCRIPTION("Solaris Porting Layer");
MODULE_LICENSE("GPL");