mirror_zfs/include/sys/kmem.h

538 lines
20 KiB
C
Raw Normal View History

/*****************************************************************************\
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
* For details, see <http://zfsonlinux.org/>.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
\*****************************************************************************/
#ifndef _SPL_KMEM_H
#define _SPL_KMEM_H
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>
#include <linux/hash.h>
#include <linux/rbtree.h>
#include <linux/ctype.h>
#include <asm/atomic.h>
#include <sys/types.h>
#include <sys/vmsystm.h>
#include <sys/kstat.h>
#include <sys/taskq.h>
/*
* Memory allocation interfaces
*/
#define KM_SLEEP GFP_KERNEL /* Can sleep, never fails */
#define KM_NOSLEEP GFP_ATOMIC /* Can not sleep, may fail */
#define KM_PUSHPAGE (GFP_NOIO | __GFP_HIGH) /* Use reserved memory */
#define KM_NODEBUG __GFP_NOWARN /* Suppress warnings */
#define KM_FLAGS __GFP_BITS_MASK
#define KM_VMFLAGS GFP_LEVEL_MASK
/*
* Used internally, the kernel does not need to support this flag
*/
#ifndef __GFP_ZERO
# define __GFP_ZERO 0x8000
#endif
/*
* PF_NOFS is a per-process debug flag which is set in current->flags to
* detect when a process is performing an unsafe allocation. All tasks
* with PF_NOFS set must strictly use KM_PUSHPAGE for allocations because
* if they enter direct reclaim and initiate I/O the may deadlock.
*
* When debugging is disabled, any incorrect usage will be detected and
* a call stack with warning will be printed to the console. The flags
* will then be automatically corrected to allow for safe execution. If
* debugging is enabled this will be treated as a fatal condition.
*
* To avoid any risk of conflicting with the existing PF_ flags. The
* PF_NOFS bit shadows the rarely used PF_MUTEX_TESTER bit. Only when
* CONFIG_RT_MUTEX_TESTER is not set, and we know this bit is unused,
* will the PF_NOFS bit be valid. Happily, most existing distributions
* ship a kernel with CONFIG_RT_MUTEX_TESTER disabled.
*/
#if !defined(CONFIG_RT_MUTEX_TESTER) && defined(PF_MUTEX_TESTER)
# define PF_NOFS PF_MUTEX_TESTER
static inline void
sanitize_flags(struct task_struct *p, gfp_t *flags)
{
if (unlikely((p->flags & PF_NOFS) && (*flags & (__GFP_IO|__GFP_FS)))) {
# ifdef NDEBUG
SDEBUG_LIMIT(SD_CONSOLE | SD_WARNING, "Fixing allocation for "
"task %s (%d) which used GFP flags 0x%x with PF_NOFS set\n",
p->comm, p->pid, flags);
spl_debug_dumpstack(p);
*flags &= ~(__GFP_IO|__GFP_FS);
# else
PANIC("FATAL allocation for task %s (%d) which used GFP "
"flags 0x%x with PF_NOFS set\n", p->comm, p->pid, flags);
# endif /* NDEBUG */
}
}
#else
# define PF_NOFS 0x00000000
# define sanitize_flags(p, fl) ((void)0)
#endif /* !defined(CONFIG_RT_MUTEX_TESTER) && defined(PF_MUTEX_TESTER) */
/*
* __GFP_NOFAIL looks like it will be removed from the kernel perhaps as
* early as 2.6.32. To avoid this issue when it occurs in upstream kernels
* we retry the allocation here as long as it is not __GFP_WAIT (GFP_ATOMIC).
* I would prefer the caller handle the failure case cleanly but we are
* trying to emulate Solaris and those are not the Solaris semantics.
*/
static inline void *
kmalloc_nofail(size_t size, gfp_t flags)
{
void *ptr;
sanitize_flags(current, &flags);
do {
ptr = kmalloc(size, flags);
} while (ptr == NULL && (flags & __GFP_WAIT));
return ptr;
}
static inline void *
kzalloc_nofail(size_t size, gfp_t flags)
{
void *ptr;
sanitize_flags(current, &flags);
do {
ptr = kzalloc(size, flags);
} while (ptr == NULL && (flags & __GFP_WAIT));
return ptr;
}
static inline void *
kmalloc_node_nofail(size_t size, gfp_t flags, int node)
{
void *ptr;
sanitize_flags(current, &flags);
do {
ptr = kmalloc_node(size, flags, node);
} while (ptr == NULL && (flags & __GFP_WAIT));
return ptr;
}
static inline void *
vmalloc_nofail(size_t size, gfp_t flags)
{
void *ptr;
sanitize_flags(current, &flags);
/*
* Retry failed __vmalloc() allocations once every second. The
* rational for the delay is that the likely failure modes are:
*
* 1) The system has completely exhausted memory, in which case
* delaying 1 second for the memory reclaim to run is reasonable
* to avoid thrashing the system.
* 2) The system has memory but has exhausted the small virtual
* address space available on 32-bit systems. Retrying the
* allocation immediately will only result in spinning on the
* virtual address space lock. It is better delay a second and
* hope that another process will free some of the address space.
* But the bottom line is there is not much we can actually do
* since we can never safely return a failure and honor the
* Solaris semantics.
*/
while (1) {
ptr = __vmalloc(size, flags | __GFP_HIGHMEM, PAGE_KERNEL);
if (unlikely((ptr == NULL) && (flags & __GFP_WAIT))) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
} else {
break;
}
}
return ptr;
}
static inline void *
vzalloc_nofail(size_t size, gfp_t flags)
{
void *ptr;
ptr = vmalloc_nofail(size, flags);
if (ptr)
memset(ptr, 0, (size));
return ptr;
}
#ifdef DEBUG_KMEM
/*
* Memory accounting functions to be used only when DEBUG_KMEM is set.
*/
# ifdef HAVE_ATOMIC64_T
# define kmem_alloc_used_add(size) atomic64_add(size, &kmem_alloc_used)
# define kmem_alloc_used_sub(size) atomic64_sub(size, &kmem_alloc_used)
# define kmem_alloc_used_read() atomic64_read(&kmem_alloc_used)
# define kmem_alloc_used_set(size) atomic64_set(&kmem_alloc_used, size)
# define vmem_alloc_used_add(size) atomic64_add(size, &vmem_alloc_used)
# define vmem_alloc_used_sub(size) atomic64_sub(size, &vmem_alloc_used)
# define vmem_alloc_used_read() atomic64_read(&vmem_alloc_used)
# define vmem_alloc_used_set(size) atomic64_set(&vmem_alloc_used, size)
extern atomic64_t kmem_alloc_used;
extern unsigned long long kmem_alloc_max;
extern atomic64_t vmem_alloc_used;
extern unsigned long long vmem_alloc_max;
# else /* HAVE_ATOMIC64_T */
# define kmem_alloc_used_add(size) atomic_add(size, &kmem_alloc_used)
# define kmem_alloc_used_sub(size) atomic_sub(size, &kmem_alloc_used)
# define kmem_alloc_used_read() atomic_read(&kmem_alloc_used)
# define kmem_alloc_used_set(size) atomic_set(&kmem_alloc_used, size)
# define vmem_alloc_used_add(size) atomic_add(size, &vmem_alloc_used)
# define vmem_alloc_used_sub(size) atomic_sub(size, &vmem_alloc_used)
# define vmem_alloc_used_read() atomic_read(&vmem_alloc_used)
# define vmem_alloc_used_set(size) atomic_set(&vmem_alloc_used, size)
extern atomic_t kmem_alloc_used;
extern unsigned long long kmem_alloc_max;
extern atomic_t vmem_alloc_used;
extern unsigned long long vmem_alloc_max;
# endif /* HAVE_ATOMIC64_T */
# ifdef DEBUG_KMEM_TRACKING
/*
* DEBUG_KMEM && DEBUG_KMEM_TRACKING
*
* The maximum level of memory debugging. All memory will be accounted
* for and each allocation will be explicitly tracked. Any allocation
* which is leaked will be reported on module unload and the exact location
* where that memory was allocation will be reported. This level of memory
* tracking will have a significant impact on performance and should only
* be enabled for debugging. This feature may be enabled by passing
* --enable-debug-kmem-tracking to configure.
*/
# define kmem_alloc(sz, fl) kmem_alloc_track((sz), (fl), \
__FUNCTION__, __LINE__, 0, 0)
# define kmem_zalloc(sz, fl) kmem_alloc_track((sz), (fl)|__GFP_ZERO,\
__FUNCTION__, __LINE__, 0, 0)
# define kmem_alloc_node(sz, fl, nd) kmem_alloc_track((sz), (fl), \
__FUNCTION__, __LINE__, 1, nd)
# define kmem_free(ptr, sz) kmem_free_track((ptr), (sz))
# define vmem_alloc(sz, fl) vmem_alloc_track((sz), (fl), \
__FUNCTION__, __LINE__)
# define vmem_zalloc(sz, fl) vmem_alloc_track((sz), (fl)|__GFP_ZERO,\
__FUNCTION__, __LINE__)
# define vmem_free(ptr, sz) vmem_free_track((ptr), (sz))
extern void *kmem_alloc_track(size_t, int, const char *, int, int, int);
extern void kmem_free_track(const void *, size_t);
extern void *vmem_alloc_track(size_t, int, const char *, int);
extern void vmem_free_track(const void *, size_t);
# else /* DEBUG_KMEM_TRACKING */
/*
* DEBUG_KMEM && !DEBUG_KMEM_TRACKING
*
* The default build will set DEBUG_KEM. This provides basic memory
* accounting with little to no impact on performance. When the module
* is unloaded in any memory was leaked the total number of leaked bytes
* will be reported on the console. To disable this basic accounting
* pass the --disable-debug-kmem option to configure.
*/
# define kmem_alloc(sz, fl) kmem_alloc_debug((sz), (fl), \
__FUNCTION__, __LINE__, 0, 0)
# define kmem_zalloc(sz, fl) kmem_alloc_debug((sz), (fl)|__GFP_ZERO,\
__FUNCTION__, __LINE__, 0, 0)
# define kmem_alloc_node(sz, fl, nd) kmem_alloc_debug((sz), (fl), \
__FUNCTION__, __LINE__, 1, nd)
# define kmem_free(ptr, sz) kmem_free_debug((ptr), (sz))
# define vmem_alloc(sz, fl) vmem_alloc_debug((sz), (fl), \
__FUNCTION__, __LINE__)
# define vmem_zalloc(sz, fl) vmem_alloc_debug((sz), (fl)|__GFP_ZERO,\
__FUNCTION__, __LINE__)
# define vmem_free(ptr, sz) vmem_free_debug((ptr), (sz))
extern void *kmem_alloc_debug(size_t, int, const char *, int, int, int);
extern void kmem_free_debug(const void *, size_t);
extern void *vmem_alloc_debug(size_t, int, const char *, int);
extern void vmem_free_debug(const void *, size_t);
# endif /* DEBUG_KMEM_TRACKING */
#else /* DEBUG_KMEM */
/*
* !DEBUG_KMEM && !DEBUG_KMEM_TRACKING
*
* All debugging is disabled. There will be no overhead even for
* minimal memory accounting. To enable basic accounting pass the
* --enable-debug-kmem option to configure.
*/
# define kmem_alloc(sz, fl) kmalloc_nofail((sz), (fl))
# define kmem_zalloc(sz, fl) kzalloc_nofail((sz), (fl))
# define kmem_alloc_node(sz, fl, nd) kmalloc_node_nofail((sz), (fl), (nd))
# define kmem_free(ptr, sz) ((void)(sz), kfree(ptr))
# define vmem_alloc(sz, fl) vmalloc_nofail((sz), (fl))
# define vmem_zalloc(sz, fl) vzalloc_nofail((sz), (fl))
# define vmem_free(ptr, sz) ((void)(sz), vfree(ptr))
#endif /* DEBUG_KMEM */
extern int kmem_debugging(void);
extern char *kmem_vasprintf(const char *fmt, va_list ap);
extern char *kmem_asprintf(const char *fmt, ...);
extern char *strdup(const char *str);
extern void strfree(char *str);
/*
* Slab allocation interfaces. The SPL slab differs from the standard
* Linux SLAB or SLUB primarily in that each cache may be backed by slabs
* allocated from the physical or virtal memory address space. The virtual
* slabs allow for good behavior when allocation large objects of identical
* size. This slab implementation also supports both constructors and
* destructions which the Linux slab does not.
*/
enum {
KMC_BIT_NOTOUCH = 0, /* Don't update ages */
KMC_BIT_NODEBUG = 1, /* Default behavior */
KMC_BIT_NOMAGAZINE = 2, /* XXX: Unsupported */
KMC_BIT_NOHASH = 3, /* XXX: Unsupported */
KMC_BIT_QCACHE = 4, /* XXX: Unsupported */
KMC_BIT_KMEM = 5, /* Use kmem cache */
KMC_BIT_VMEM = 6, /* Use vmem cache */
Add KMC_SLAB cache type For small objects the Linux slab allocator has several advantages over its counterpart in the SPL. These include: 1) It is more memory-efficient and packs objects more tightly. 2) It is continually tuned to maximize performance. Therefore it makes sense to layer the SPLs slab allocator on top of the Linux slab allocator. This allows us to leverage the advantages above while preserving the Illumos semantics we depend on. However, there are some things we need to be careful of: 1) The Linux slab allocator was never designed to work well with large objects. Because the SPL slab must still handle this use case a cut off limit was added to transition from Linux slab backed objects to kmem or vmem backed slabs. spl_kmem_cache_slab_limit - Objects less than or equal to this size in bytes will be backed by the Linux slab. By default this value is zero which disables the Linux slab functionality. Reasonable values for this cut off limit are in the range of 4096-16386 bytes. spl_kmem_cache_kmem_limit - Objects less than or equal to this size in bytes will be backed by a kmem slab. Objects over this size will be vmem backed instead. This value defaults to 1/8 a page, or 512 bytes on an x86_64 architecture. 2) Be aware that using the Linux slab may inadvertently introduce new deadlocks. Care has been taken previously to ensure that all allocations which occur in the write path use GFP_NOIO. However, there may be internal allocations performed in the Linux slab which do not honor these flags. If this is the case a deadlock may occur. The path forward is definitely to start relying on the Linux slab. But for that to happen we need to start building confidence that there aren't any unexpected surprises lurking for us. And ideally need to move completely away from using the SPLs slab for large memory allocations. This patch is a first step. NOTES: 1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab backed caches but it is not supported for kmem/vmem backed caches. 2) Regardless of the spl_kmem_cache_*_limit settings a cache may be explicitly set to a given type by passed the KMC_KMEM, KMC_VMEM, or KMC_SLAB flags during cache creation. 3) The constructors, destructors, and reclaim callbacks are all functional and will be called regardless of the cache type. 4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to the issues involved in presenting correct object accounting. Instead they will appear in /proc/slabinfo under the same names. 5) Several kmem SPLAT tests needed to be fixed because they relied incorrectly on internal kmem slab accounting. With the updated test cases all the SPLAT tests pass as expected. 6) An autoconf test was added to ensure that the __GFP_COMP flag was correctly added to the default flags used when allocating a slab. This is required to ensure all pages in higher order slabs are properly refcounted, see ae16ed9. 7) When using the SLUB allocator there is no need to attempt to set the __GFP_COMP flag. This has been the default behavior for the SLUB since Linux 2.6.25. 8) When using the SLUB it may be desirable to set the slub_nomerge kernel parameter to prevent caches from being merged. Original-patch-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #356
2013-12-09 02:01:45 +04:00
KMC_BIT_SLAB = 7, /* Use Linux slab cache */
KMC_BIT_OFFSLAB = 8, /* Objects not on slab */
KMC_BIT_NOEMERGENCY = 9, /* Disable emergency objects */
KMC_BIT_DEADLOCKED = 14, /* Deadlock detected */
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
KMC_BIT_GROWING = 15, /* Growing in progress */
KMC_BIT_REAPING = 16, /* Reaping in progress */
KMC_BIT_DESTROY = 17, /* Destroy in progress */
KMC_BIT_TOTAL = 18, /* Proc handler helper bit */
KMC_BIT_ALLOC = 19, /* Proc handler helper bit */
KMC_BIT_MAX = 20, /* Proc handler helper bit */
};
/* kmem move callback return values */
typedef enum kmem_cbrc {
KMEM_CBRC_YES = 0, /* Object moved */
KMEM_CBRC_NO = 1, /* Object not moved */
KMEM_CBRC_LATER = 2, /* Object not moved, try again later */
KMEM_CBRC_DONT_NEED = 3, /* Neither object is needed */
KMEM_CBRC_DONT_KNOW = 4, /* Object unknown */
} kmem_cbrc_t;
#define KMC_NOTOUCH (1 << KMC_BIT_NOTOUCH)
#define KMC_NODEBUG (1 << KMC_BIT_NODEBUG)
#define KMC_NOMAGAZINE (1 << KMC_BIT_NOMAGAZINE)
#define KMC_NOHASH (1 << KMC_BIT_NOHASH)
#define KMC_QCACHE (1 << KMC_BIT_QCACHE)
#define KMC_KMEM (1 << KMC_BIT_KMEM)
#define KMC_VMEM (1 << KMC_BIT_VMEM)
Add KMC_SLAB cache type For small objects the Linux slab allocator has several advantages over its counterpart in the SPL. These include: 1) It is more memory-efficient and packs objects more tightly. 2) It is continually tuned to maximize performance. Therefore it makes sense to layer the SPLs slab allocator on top of the Linux slab allocator. This allows us to leverage the advantages above while preserving the Illumos semantics we depend on. However, there are some things we need to be careful of: 1) The Linux slab allocator was never designed to work well with large objects. Because the SPL slab must still handle this use case a cut off limit was added to transition from Linux slab backed objects to kmem or vmem backed slabs. spl_kmem_cache_slab_limit - Objects less than or equal to this size in bytes will be backed by the Linux slab. By default this value is zero which disables the Linux slab functionality. Reasonable values for this cut off limit are in the range of 4096-16386 bytes. spl_kmem_cache_kmem_limit - Objects less than or equal to this size in bytes will be backed by a kmem slab. Objects over this size will be vmem backed instead. This value defaults to 1/8 a page, or 512 bytes on an x86_64 architecture. 2) Be aware that using the Linux slab may inadvertently introduce new deadlocks. Care has been taken previously to ensure that all allocations which occur in the write path use GFP_NOIO. However, there may be internal allocations performed in the Linux slab which do not honor these flags. If this is the case a deadlock may occur. The path forward is definitely to start relying on the Linux slab. But for that to happen we need to start building confidence that there aren't any unexpected surprises lurking for us. And ideally need to move completely away from using the SPLs slab for large memory allocations. This patch is a first step. NOTES: 1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab backed caches but it is not supported for kmem/vmem backed caches. 2) Regardless of the spl_kmem_cache_*_limit settings a cache may be explicitly set to a given type by passed the KMC_KMEM, KMC_VMEM, or KMC_SLAB flags during cache creation. 3) The constructors, destructors, and reclaim callbacks are all functional and will be called regardless of the cache type. 4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to the issues involved in presenting correct object accounting. Instead they will appear in /proc/slabinfo under the same names. 5) Several kmem SPLAT tests needed to be fixed because they relied incorrectly on internal kmem slab accounting. With the updated test cases all the SPLAT tests pass as expected. 6) An autoconf test was added to ensure that the __GFP_COMP flag was correctly added to the default flags used when allocating a slab. This is required to ensure all pages in higher order slabs are properly refcounted, see ae16ed9. 7) When using the SLUB allocator there is no need to attempt to set the __GFP_COMP flag. This has been the default behavior for the SLUB since Linux 2.6.25. 8) When using the SLUB it may be desirable to set the slub_nomerge kernel parameter to prevent caches from being merged. Original-patch-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #356
2013-12-09 02:01:45 +04:00
#define KMC_SLAB (1 << KMC_BIT_SLAB)
#define KMC_OFFSLAB (1 << KMC_BIT_OFFSLAB)
#define KMC_NOEMERGENCY (1 << KMC_BIT_NOEMERGENCY)
#define KMC_DEADLOCKED (1 << KMC_BIT_DEADLOCKED)
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
#define KMC_GROWING (1 << KMC_BIT_GROWING)
#define KMC_REAPING (1 << KMC_BIT_REAPING)
#define KMC_DESTROY (1 << KMC_BIT_DESTROY)
#define KMC_TOTAL (1 << KMC_BIT_TOTAL)
#define KMC_ALLOC (1 << KMC_BIT_ALLOC)
#define KMC_MAX (1 << KMC_BIT_MAX)
#define KMC_REAP_CHUNK INT_MAX
#define KMC_DEFAULT_SEEKS 1
#define KMC_EXPIRE_AGE 0x1 /* Due to age */
#define KMC_EXPIRE_MEM 0x2 /* Due to low memory */
#define KMC_RECLAIM_ONCE 0x1 /* Force a single shrinker pass */
extern unsigned int spl_kmem_cache_expire;
extern struct list_head spl_kmem_cache_list;
extern struct rw_semaphore spl_kmem_cache_sem;
#define SKM_MAGIC 0x2e2e2e2e
#define SKO_MAGIC 0x20202020
#define SKS_MAGIC 0x22222222
#define SKC_MAGIC 0x2c2c2c2c
#define SPL_KMEM_CACHE_DELAY 15 /* Minimum slab release age */
#define SPL_KMEM_CACHE_REAP 0 /* Default reap everything */
#define SPL_KMEM_CACHE_OBJ_PER_SLAB 16 /* Target objects per slab */
#define SPL_KMEM_CACHE_OBJ_PER_SLAB_MIN 8 /* Minimum objects per slab */
#define SPL_KMEM_CACHE_ALIGN 8 /* Default object alignment */
#define POINTER_IS_VALID(p) 0 /* Unimplemented */
#define POINTER_INVALIDATE(pp) /* Unimplemented */
typedef int (*spl_kmem_ctor_t)(void *, void *, int);
typedef void (*spl_kmem_dtor_t)(void *, void *);
typedef void (*spl_kmem_reclaim_t)(void *);
typedef struct spl_kmem_magazine {
uint32_t skm_magic; /* Sanity magic */
uint32_t skm_avail; /* Available objects */
uint32_t skm_size; /* Magazine size */
uint32_t skm_refill; /* Batch refill size */
struct spl_kmem_cache *skm_cache; /* Owned by cache */
unsigned long skm_age; /* Last cache access */
unsigned int skm_cpu; /* Owned by cpu */
void *skm_objs[0]; /* Object pointers */
} spl_kmem_magazine_t;
typedef struct spl_kmem_obj {
uint32_t sko_magic; /* Sanity magic */
void *sko_addr; /* Buffer address */
struct spl_kmem_slab *sko_slab; /* Owned by slab */
struct list_head sko_list; /* Free object list linkage */
} spl_kmem_obj_t;
typedef struct spl_kmem_slab {
uint32_t sks_magic; /* Sanity magic */
uint32_t sks_objs; /* Objects per slab */
struct spl_kmem_cache *sks_cache; /* Owned by cache */
struct list_head sks_list; /* Slab list linkage */
struct list_head sks_free_list; /* Free object list */
unsigned long sks_age; /* Last modify jiffie */
uint32_t sks_ref; /* Ref count used objects */
} spl_kmem_slab_t;
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
typedef struct spl_kmem_alloc {
struct spl_kmem_cache *ska_cache; /* Owned by cache */
int ska_flags; /* Allocation flags */
taskq_ent_t ska_tqe; /* Task queue entry */
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
} spl_kmem_alloc_t;
typedef struct spl_kmem_emergency {
struct rb_node ske_node; /* Emergency tree linkage */
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
void *ske_obj; /* Buffer address */
} spl_kmem_emergency_t;
typedef struct spl_kmem_cache {
uint32_t skc_magic; /* Sanity magic */
uint32_t skc_name_size; /* Name length */
char *skc_name; /* Name string */
spl_kmem_magazine_t *skc_mag[NR_CPUS]; /* Per-CPU warm cache */
uint32_t skc_mag_size; /* Magazine size */
uint32_t skc_mag_refill; /* Magazine refill count */
spl_kmem_ctor_t skc_ctor; /* Constructor */
spl_kmem_dtor_t skc_dtor; /* Destructor */
spl_kmem_reclaim_t skc_reclaim; /* Reclaimator */
void *skc_private; /* Private data */
void *skc_vmp; /* Unused */
Add KMC_SLAB cache type For small objects the Linux slab allocator has several advantages over its counterpart in the SPL. These include: 1) It is more memory-efficient and packs objects more tightly. 2) It is continually tuned to maximize performance. Therefore it makes sense to layer the SPLs slab allocator on top of the Linux slab allocator. This allows us to leverage the advantages above while preserving the Illumos semantics we depend on. However, there are some things we need to be careful of: 1) The Linux slab allocator was never designed to work well with large objects. Because the SPL slab must still handle this use case a cut off limit was added to transition from Linux slab backed objects to kmem or vmem backed slabs. spl_kmem_cache_slab_limit - Objects less than or equal to this size in bytes will be backed by the Linux slab. By default this value is zero which disables the Linux slab functionality. Reasonable values for this cut off limit are in the range of 4096-16386 bytes. spl_kmem_cache_kmem_limit - Objects less than or equal to this size in bytes will be backed by a kmem slab. Objects over this size will be vmem backed instead. This value defaults to 1/8 a page, or 512 bytes on an x86_64 architecture. 2) Be aware that using the Linux slab may inadvertently introduce new deadlocks. Care has been taken previously to ensure that all allocations which occur in the write path use GFP_NOIO. However, there may be internal allocations performed in the Linux slab which do not honor these flags. If this is the case a deadlock may occur. The path forward is definitely to start relying on the Linux slab. But for that to happen we need to start building confidence that there aren't any unexpected surprises lurking for us. And ideally need to move completely away from using the SPLs slab for large memory allocations. This patch is a first step. NOTES: 1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab backed caches but it is not supported for kmem/vmem backed caches. 2) Regardless of the spl_kmem_cache_*_limit settings a cache may be explicitly set to a given type by passed the KMC_KMEM, KMC_VMEM, or KMC_SLAB flags during cache creation. 3) The constructors, destructors, and reclaim callbacks are all functional and will be called regardless of the cache type. 4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to the issues involved in presenting correct object accounting. Instead they will appear in /proc/slabinfo under the same names. 5) Several kmem SPLAT tests needed to be fixed because they relied incorrectly on internal kmem slab accounting. With the updated test cases all the SPLAT tests pass as expected. 6) An autoconf test was added to ensure that the __GFP_COMP flag was correctly added to the default flags used when allocating a slab. This is required to ensure all pages in higher order slabs are properly refcounted, see ae16ed9. 7) When using the SLUB allocator there is no need to attempt to set the __GFP_COMP flag. This has been the default behavior for the SLUB since Linux 2.6.25. 8) When using the SLUB it may be desirable to set the slub_nomerge kernel parameter to prevent caches from being merged. Original-patch-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #356
2013-12-09 02:01:45 +04:00
struct kmem_cache *skc_linux_cache; /* Linux slab cache if used */
unsigned long skc_flags; /* Flags */
uint32_t skc_obj_size; /* Object size */
uint32_t skc_obj_align; /* Object alignment */
uint32_t skc_slab_objs; /* Objects per slab */
uint32_t skc_slab_size; /* Slab size */
uint32_t skc_delay; /* Slab reclaim interval */
uint32_t skc_reap; /* Slab reclaim count */
atomic_t skc_ref; /* Ref count callers */
taskqid_t skc_taskqid; /* Slab reclaim task */
struct list_head skc_list; /* List of caches linkage */
struct list_head skc_complete_list;/* Completely alloc'ed */
struct list_head skc_partial_list; /* Partially alloc'ed */
struct rb_root skc_emergency_tree; /* Min sized objects */
spinlock_t skc_lock; /* Cache lock */
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
wait_queue_head_t skc_waitq; /* Allocation waiters */
uint64_t skc_slab_fail; /* Slab alloc failures */
uint64_t skc_slab_create;/* Slab creates */
uint64_t skc_slab_destroy;/* Slab destroys */
uint64_t skc_slab_total; /* Slab total current */
uint64_t skc_slab_alloc; /* Slab alloc current */
uint64_t skc_slab_max; /* Slab max historic */
uint64_t skc_obj_total; /* Obj total current */
uint64_t skc_obj_alloc; /* Obj alloc current */
uint64_t skc_obj_max; /* Obj max historic */
uint64_t skc_obj_deadlock; /* Obj emergency deadlocks */
Emergency slab objects This patch is designed to resolve a deadlock which can occur with __vmalloc() based slabs. The issue is that the Linux kernel does not honor the flags passed to __vmalloc(). This makes it unsafe to use in a writeback context. Unfortunately, this is a use case ZFS depends on for correct operation. Fixing this issue in the upstream kernel was pursued and patches are available which resolve the issue. https://bugs.gentoo.org/show_bug.cgi?id=416685 However, these changes were rejected because upstream felt that using __vmalloc() in the context of writeback should never be done. Their solution was for us to rewrite parts of ZFS to accomidate the Linux VM. While that is probably the right long term solution, and it is something we want to pursue, it is not a trivial task and will likely destabilize the existing code. This work has been planned for the 0.7.0 release but in the meanwhile we want to improve the SPL slab implementation to accomidate this expected ZFS usage. This is accomplished by performing the __vmalloc() asynchronously in the context of a work queue. This doesn't prevent the posibility of the worker thread from deadlocking. However, the caller can now safely block on a wait queue for the slab allocation to complete. Normally this will occur in a reasonable amount of time and the caller will be woken up when the new slab is available,. The objects will then get cached in the per-cpu magazines and everything will proceed as usual. However, if the __vmalloc() deadlocks for the reasons described above, or is just very slow, then the callers on the wait queues will timeout out. When this rare situation occurs they will attempt to kmalloc() a single minimally sized object using the GFP_NOIO flags. This allocation will not deadlock because kmalloc() will honor the passed flags and the caller will be able to make forward progress. As long as forward progress can be maintained then even if the worker thread is deadlocked the critical thread will make progress. This will eventually allow the deadlocked worker thread to complete and normal operation will resume. These emergency allocations will likely be slow since they require contiguous pages. However, their use should be rare so the impact is expected to be minimal. If that turns out not to be the case in practice further optimizations are possible. One additional concern is if these emergency objects are long lived. Right now they are simply tracked on a list which must be walked when an object is freed. Is they accumulate on a system and the list grows freeing objects will become more expensive. This could be handled relatively easily by using a hash instead of a list, but that optimization (if needed) is left for a follow up patch. Additionally, these emeregency objects could be repacked in to existing slabs as objects are freed if the kmem_cache_set_move() functionality was implemented. See issue https://github.com/zfsonlinux/spl/issues/26 for full details. This work would also help reduce ZFS's memory fragmentation problems. The /proc/spl/kmem/slab file has had two new columns added at the end. The 'emerg' column reports the current number of these emergency objects in use for the cache, and the following 'max' column shows the historical worst case. These value should give us a good idea of how often these objects are needed. Based on these values under real use cases we can tune the default behavior. Lastly, as a side benefit using a single work queue for the slab allocations should reduce cpu contention on the global virtual address space lock. This should manifest itself as reduced cpu usage for the system. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 03:59:50 +04:00
uint64_t skc_obj_emergency; /* Obj emergency current */
uint64_t skc_obj_emergency_max; /* Obj emergency max */
} spl_kmem_cache_t;
#define kmem_cache_t spl_kmem_cache_t
extern spl_kmem_cache_t *spl_kmem_cache_create(char *name, size_t size,
size_t align, spl_kmem_ctor_t ctor, spl_kmem_dtor_t dtor,
spl_kmem_reclaim_t reclaim, void *priv, void *vmp, int flags);
extern void spl_kmem_cache_set_move(spl_kmem_cache_t *,
kmem_cbrc_t (*)(void *, void *, size_t, void *));
extern void spl_kmem_cache_destroy(spl_kmem_cache_t *skc);
extern void *spl_kmem_cache_alloc(spl_kmem_cache_t *skc, int flags);
extern void spl_kmem_cache_free(spl_kmem_cache_t *skc, void *obj);
extern void spl_kmem_cache_reap_now(spl_kmem_cache_t *skc, int count);
extern void spl_kmem_reap(void);
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 00:20:40 +03:00
int spl_kmem_init_kallsyms_lookup(void);
int spl_kmem_init(void);
void spl_kmem_fini(void);
#define kmem_cache_create(name,size,align,ctor,dtor,rclm,priv,vmp,flags) \
spl_kmem_cache_create(name,size,align,ctor,dtor,rclm,priv,vmp,flags)
#define kmem_cache_set_move(skc, move) spl_kmem_cache_set_move(skc, move)
#define kmem_cache_destroy(skc) spl_kmem_cache_destroy(skc)
#define kmem_cache_alloc(skc, flags) spl_kmem_cache_alloc(skc, flags)
#define kmem_cache_free(skc, obj) spl_kmem_cache_free(skc, obj)
#define kmem_cache_reap_now(skc) \
spl_kmem_cache_reap_now(skc, skc->skc_reap)
#define kmem_reap() spl_kmem_reap()
#define kmem_virt(ptr) (((ptr) >= (void *)VMALLOC_START) && \
((ptr) < (void *)VMALLOC_END))
Add KMC_SLAB cache type For small objects the Linux slab allocator has several advantages over its counterpart in the SPL. These include: 1) It is more memory-efficient and packs objects more tightly. 2) It is continually tuned to maximize performance. Therefore it makes sense to layer the SPLs slab allocator on top of the Linux slab allocator. This allows us to leverage the advantages above while preserving the Illumos semantics we depend on. However, there are some things we need to be careful of: 1) The Linux slab allocator was never designed to work well with large objects. Because the SPL slab must still handle this use case a cut off limit was added to transition from Linux slab backed objects to kmem or vmem backed slabs. spl_kmem_cache_slab_limit - Objects less than or equal to this size in bytes will be backed by the Linux slab. By default this value is zero which disables the Linux slab functionality. Reasonable values for this cut off limit are in the range of 4096-16386 bytes. spl_kmem_cache_kmem_limit - Objects less than or equal to this size in bytes will be backed by a kmem slab. Objects over this size will be vmem backed instead. This value defaults to 1/8 a page, or 512 bytes on an x86_64 architecture. 2) Be aware that using the Linux slab may inadvertently introduce new deadlocks. Care has been taken previously to ensure that all allocations which occur in the write path use GFP_NOIO. However, there may be internal allocations performed in the Linux slab which do not honor these flags. If this is the case a deadlock may occur. The path forward is definitely to start relying on the Linux slab. But for that to happen we need to start building confidence that there aren't any unexpected surprises lurking for us. And ideally need to move completely away from using the SPLs slab for large memory allocations. This patch is a first step. NOTES: 1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab backed caches but it is not supported for kmem/vmem backed caches. 2) Regardless of the spl_kmem_cache_*_limit settings a cache may be explicitly set to a given type by passed the KMC_KMEM, KMC_VMEM, or KMC_SLAB flags during cache creation. 3) The constructors, destructors, and reclaim callbacks are all functional and will be called regardless of the cache type. 4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to the issues involved in presenting correct object accounting. Instead they will appear in /proc/slabinfo under the same names. 5) Several kmem SPLAT tests needed to be fixed because they relied incorrectly on internal kmem slab accounting. With the updated test cases all the SPLAT tests pass as expected. 6) An autoconf test was added to ensure that the __GFP_COMP flag was correctly added to the default flags used when allocating a slab. This is required to ensure all pages in higher order slabs are properly refcounted, see ae16ed9. 7) When using the SLUB allocator there is no need to attempt to set the __GFP_COMP flag. This has been the default behavior for the SLUB since Linux 2.6.25. 8) When using the SLUB it may be desirable to set the slub_nomerge kernel parameter to prevent caches from being merged. Original-patch-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Closes #356
2013-12-09 02:01:45 +04:00
/*
* Allow custom slab allocation flags to be set for KMC_SLAB based caches.
* One use for this function is to ensure the __GFP_COMP flag is part of
* the default allocation mask which ensures higher order allocations are
* properly refcounted. This flag was added to the default ->allocflags
* as of Linux 3.11.
*/
static inline void
kmem_cache_set_allocflags(spl_kmem_cache_t *skc, gfp_t flags)
{
if (skc->skc_linux_cache == NULL)
return;
#if defined(HAVE_KMEM_CACHE_ALLOCFLAGS)
skc->skc_linux_cache->allocflags |= flags;
#elif defined(HAVE_KMEM_CACHE_GFPFLAGS)
skc->skc_linux_cache->gfpflags |= flags;
#endif
}
#endif /* _SPL_KMEM_H */