mirror_zfs/module/zfs/dbuf.c

5056 lines
146 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
* Copyright (c) 2012, 2020 by Delphix. All rights reserved.
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 20:10:17 +03:00
* Copyright (c) 2019, Klara Inc.
* Copyright (c) 2019, Allan Jude
2008-11-20 23:01:55 +03:00
*/
#include <sys/zfs_context.h>
#include <sys/arc.h>
2008-11-20 23:01:55 +03:00
#include <sys/dmu.h>
#include <sys/dmu_send.h>
2008-11-20 23:01:55 +03:00
#include <sys/dmu_impl.h>
#include <sys/dbuf.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_dir.h>
#include <sys/dmu_tx.h>
#include <sys/spa.h>
#include <sys/zio.h>
#include <sys/dmu_zfetch.h>
#include <sys/sa.h>
#include <sys/sa_impl.h>
#include <sys/zfeature.h>
#include <sys/blkptr.h>
#include <sys/range_tree.h>
#include <sys/trace_zfs.h>
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
#include <sys/callb.h>
#include <sys/abd.h>
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
#include <sys/vdev.h>
#include <cityhash.h>
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
#include <sys/spa_impl.h>
#include <sys/wmsum.h>
2008-11-20 23:01:55 +03:00
kstat_t *dbuf_ksp;
typedef struct dbuf_stats {
/*
* Various statistics about the size of the dbuf cache.
*/
kstat_named_t cache_count;
kstat_named_t cache_size_bytes;
kstat_named_t cache_size_bytes_max;
/*
* Statistics regarding the bounds on the dbuf cache size.
*/
kstat_named_t cache_target_bytes;
kstat_named_t cache_lowater_bytes;
kstat_named_t cache_hiwater_bytes;
/*
* Total number of dbuf cache evictions that have occurred.
*/
kstat_named_t cache_total_evicts;
/*
* The distribution of dbuf levels in the dbuf cache and
* the total size of all dbufs at each level.
*/
kstat_named_t cache_levels[DN_MAX_LEVELS];
kstat_named_t cache_levels_bytes[DN_MAX_LEVELS];
/*
* Statistics about the dbuf hash table.
*/
kstat_named_t hash_hits;
kstat_named_t hash_misses;
kstat_named_t hash_collisions;
kstat_named_t hash_elements;
kstat_named_t hash_elements_max;
/*
* Number of sublists containing more than one dbuf in the dbuf
* hash table. Keep track of the longest hash chain.
*/
kstat_named_t hash_chains;
kstat_named_t hash_chain_max;
/*
* Number of times a dbuf_create() discovers that a dbuf was
* already created and in the dbuf hash table.
*/
kstat_named_t hash_insert_race;
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
/*
* Statistics about the size of the metadata dbuf cache.
*/
kstat_named_t metadata_cache_count;
kstat_named_t metadata_cache_size_bytes;
kstat_named_t metadata_cache_size_bytes_max;
/*
* For diagnostic purposes, this is incremented whenever we can't add
* something to the metadata cache because it's full, and instead put
* the data in the regular dbuf cache.
*/
kstat_named_t metadata_cache_overflow;
} dbuf_stats_t;
dbuf_stats_t dbuf_stats = {
{ "cache_count", KSTAT_DATA_UINT64 },
{ "cache_size_bytes", KSTAT_DATA_UINT64 },
{ "cache_size_bytes_max", KSTAT_DATA_UINT64 },
{ "cache_target_bytes", KSTAT_DATA_UINT64 },
{ "cache_lowater_bytes", KSTAT_DATA_UINT64 },
{ "cache_hiwater_bytes", KSTAT_DATA_UINT64 },
{ "cache_total_evicts", KSTAT_DATA_UINT64 },
{ { "cache_levels_N", KSTAT_DATA_UINT64 } },
{ { "cache_levels_bytes_N", KSTAT_DATA_UINT64 } },
{ "hash_hits", KSTAT_DATA_UINT64 },
{ "hash_misses", KSTAT_DATA_UINT64 },
{ "hash_collisions", KSTAT_DATA_UINT64 },
{ "hash_elements", KSTAT_DATA_UINT64 },
{ "hash_elements_max", KSTAT_DATA_UINT64 },
{ "hash_chains", KSTAT_DATA_UINT64 },
{ "hash_chain_max", KSTAT_DATA_UINT64 },
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
{ "hash_insert_race", KSTAT_DATA_UINT64 },
{ "metadata_cache_count", KSTAT_DATA_UINT64 },
{ "metadata_cache_size_bytes", KSTAT_DATA_UINT64 },
{ "metadata_cache_size_bytes_max", KSTAT_DATA_UINT64 },
{ "metadata_cache_overflow", KSTAT_DATA_UINT64 }
};
struct {
wmsum_t cache_count;
wmsum_t cache_total_evicts;
wmsum_t cache_levels[DN_MAX_LEVELS];
wmsum_t cache_levels_bytes[DN_MAX_LEVELS];
wmsum_t hash_hits;
wmsum_t hash_misses;
wmsum_t hash_collisions;
wmsum_t hash_chains;
wmsum_t hash_insert_race;
wmsum_t metadata_cache_count;
wmsum_t metadata_cache_overflow;
} dbuf_sums;
#define DBUF_STAT_INCR(stat, val) \
wmsum_add(&dbuf_sums.stat, val);
#define DBUF_STAT_DECR(stat, val) \
DBUF_STAT_INCR(stat, -(val));
#define DBUF_STAT_BUMP(stat) \
DBUF_STAT_INCR(stat, 1);
#define DBUF_STAT_BUMPDOWN(stat) \
DBUF_STAT_INCR(stat, -1);
#define DBUF_STAT_MAX(stat, v) { \
uint64_t _m; \
while ((v) > (_m = dbuf_stats.stat.value.ui64) && \
(_m != atomic_cas_64(&dbuf_stats.stat.value.ui64, _m, (v))))\
continue; \
}
static boolean_t dbuf_undirty(dmu_buf_impl_t *db, dmu_tx_t *tx);
static void dbuf_write(dbuf_dirty_record_t *dr, arc_buf_t *data, dmu_tx_t *tx);
static void dbuf_sync_leaf_verify_bonus_dnode(dbuf_dirty_record_t *dr);
static int dbuf_read_verify_dnode_crypt(dmu_buf_impl_t *db, uint32_t flags);
2008-11-20 23:01:55 +03:00
extern inline void dmu_buf_init_user(dmu_buf_user_t *dbu,
dmu_buf_evict_func_t *evict_func_sync,
dmu_buf_evict_func_t *evict_func_async,
dmu_buf_t **clear_on_evict_dbufp);
2008-11-20 23:01:55 +03:00
/*
* Global data structures and functions for the dbuf cache.
*/
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
static kmem_cache_t *dbuf_kmem_cache;
static taskq_t *dbu_evict_taskq;
2008-11-20 23:01:55 +03:00
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
static kthread_t *dbuf_cache_evict_thread;
static kmutex_t dbuf_evict_lock;
static kcondvar_t dbuf_evict_cv;
static boolean_t dbuf_evict_thread_exit;
/*
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
* There are two dbuf caches; each dbuf can only be in one of them at a time.
*
* 1. Cache of metadata dbufs, to help make read-heavy administrative commands
* from /sbin/zfs run faster. The "metadata cache" specifically stores dbufs
* that represent the metadata that describes filesystems/snapshots/
* bookmarks/properties/etc. We only evict from this cache when we export a
* pool, to short-circuit as much I/O as possible for all administrative
* commands that need the metadata. There is no eviction policy for this
* cache, because we try to only include types in it which would occupy a
* very small amount of space per object but create a large impact on the
* performance of these commands. Instead, after it reaches a maximum size
* (which should only happen on very small memory systems with a very large
* number of filesystem objects), we stop taking new dbufs into the
* metadata cache, instead putting them in the normal dbuf cache.
*
* 2. LRU cache of dbufs. The dbuf cache maintains a list of dbufs that
* are not currently held but have been recently released. These dbufs
* are not eligible for arc eviction until they are aged out of the cache.
* Dbufs that are aged out of the cache will be immediately destroyed and
* become eligible for arc eviction.
*
* Dbufs are added to these caches once the last hold is released. If a dbuf is
* later accessed and still exists in the dbuf cache, then it will be removed
* from the cache and later re-added to the head of the cache.
*
* If a given dbuf meets the requirements for the metadata cache, it will go
* there, otherwise it will be considered for the generic LRU dbuf cache. The
* caches and the refcounts tracking their sizes are stored in an array indexed
* by those caches' matching enum values (from dbuf_cached_state_t).
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
*/
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
typedef struct dbuf_cache {
multilist_t cache;
zfs_refcount_t size ____cacheline_aligned;
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
} dbuf_cache_t;
dbuf_cache_t dbuf_caches[DB_CACHE_MAX];
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
/* Size limits for the caches */
unsigned long dbuf_cache_max_bytes = ULONG_MAX;
unsigned long dbuf_metadata_cache_max_bytes = ULONG_MAX;
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
/* Set the default sizes of the caches to log2 fraction of arc size */
OpenZFS 9188 - increase size of dbuf cache to reduce indirect block decompression With compressed ARC (bug 6950) we use up to 25% of our CPU to decompress indirect blocks, under a workload of random cached reads. To reduce this decompression cost, we would like to increase the size of the dbuf cache so that more indirect blocks can be stored uncompressed. If we are caching entire large files of recordsize=8K, the indirect blocks use 1/64th as much memory as the data blocks (assuming they have the same compression ratio). We suggest making the dbuf cache be 1/32nd of all memory, so that in this scenario we should be able to keep all the indirect blocks decompressed in the dbuf cache. (We want it to be more than the 1/64th that the indirect blocks would use because we need to cache other stuff in the dbuf cache as well.) In real world workloads, this won't help as dramatically as the example above, but we think it's still worth it because the risk of decreasing performance is low. The potential negative performance impact is that we will be slightly reducing the size of the ARC (by ~3%). Porting Notes: * Added modules options to zfs-module-parameters.5 man page. * Preserved scaling based on target ARC size rather than max ARC size. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Prashanth Sreenivasa <pks@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/9188 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/564 Upstream bug: DLPX-46942 Closes #7273
2018-03-13 20:52:48 +03:00
int dbuf_cache_shift = 5;
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
int dbuf_metadata_cache_shift = 6;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
static unsigned long dbuf_cache_target_bytes(void);
static unsigned long dbuf_metadata_cache_target_bytes(void);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/*
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
* The LRU dbuf cache uses a three-stage eviction policy:
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
* - A low water marker designates when the dbuf eviction thread
* should stop evicting from the dbuf cache.
* - When we reach the maximum size (aka mid water mark), we
* signal the eviction thread to run.
* - The high water mark indicates when the eviction thread
* is unable to keep up with the incoming load and eviction must
* happen in the context of the calling thread.
*
* The dbuf cache:
* (max size)
* low water mid water hi water
* +----------------------------------------+----------+----------+
* | | | |
* | | | |
* | | | |
* | | | |
* +----------------------------------------+----------+----------+
* stop signal evict
* evicting eviction directly
* thread
*
* The high and low water marks indicate the operating range for the eviction
* thread. The low water mark is, by default, 90% of the total size of the
* cache and the high water mark is at 110% (both of these percentages can be
* changed by setting dbuf_cache_lowater_pct and dbuf_cache_hiwater_pct,
* respectively). The eviction thread will try to ensure that the cache remains
* within this range by waking up every second and checking if the cache is
* above the low water mark. The thread can also be woken up by callers adding
* elements into the cache if the cache is larger than the mid water (i.e max
* cache size). Once the eviction thread is woken up and eviction is required,
* it will continue evicting buffers until it's able to reduce the cache size
* to the low water mark. If the cache size continues to grow and hits the high
* water mark, then callers adding elements to the cache will begin to evict
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
* directly from the cache until the cache is no longer above the high water
* mark.
*/
/*
* The percentage above and below the maximum cache size.
*/
uint_t dbuf_cache_hiwater_pct = 10;
uint_t dbuf_cache_lowater_pct = 10;
2008-11-20 23:01:55 +03:00
/* ARGSUSED */
static int
dbuf_cons(void *vdb, void *unused, int kmflag)
{
dmu_buf_impl_t *db = vdb;
bzero(db, sizeof (dmu_buf_impl_t));
mutex_init(&db->db_mtx, NULL, MUTEX_DEFAULT, NULL);
rw_init(&db->db_rwlock, NULL, RW_DEFAULT, NULL);
2008-11-20 23:01:55 +03:00
cv_init(&db->db_changed, NULL, CV_DEFAULT, NULL);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
multilist_link_init(&db->db_cache_link);
zfs_refcount_create(&db->db_holds);
2008-11-20 23:01:55 +03:00
return (0);
}
/* ARGSUSED */
static void
dbuf_dest(void *vdb, void *unused)
{
dmu_buf_impl_t *db = vdb;
mutex_destroy(&db->db_mtx);
rw_destroy(&db->db_rwlock);
2008-11-20 23:01:55 +03:00
cv_destroy(&db->db_changed);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT(!multilist_link_active(&db->db_cache_link));
zfs_refcount_destroy(&db->db_holds);
2008-11-20 23:01:55 +03:00
}
/*
* dbuf hash table routines
*/
static dbuf_hash_table_t dbuf_hash_table;
/*
* We use Cityhash for this. It's fast, and has good hash properties without
* requiring any large static buffers.
*/
2008-11-20 23:01:55 +03:00
static uint64_t
dbuf_hash(void *os, uint64_t obj, uint8_t lvl, uint64_t blkid)
{
return (cityhash4((uintptr_t)os, obj, (uint64_t)lvl, blkid));
2008-11-20 23:01:55 +03:00
}
#define DTRACE_SET_STATE(db, why) \
DTRACE_PROBE2(dbuf__state_change, dmu_buf_impl_t *, db, \
const char *, why)
2008-11-20 23:01:55 +03:00
#define DBUF_EQUAL(dbuf, os, obj, level, blkid) \
((dbuf)->db.db_object == (obj) && \
(dbuf)->db_objset == (os) && \
(dbuf)->db_level == (level) && \
(dbuf)->db_blkid == (blkid))
dmu_buf_impl_t *
dbuf_find(objset_t *os, uint64_t obj, uint8_t level, uint64_t blkid)
2008-11-20 23:01:55 +03:00
{
dbuf_hash_table_t *h = &dbuf_hash_table;
uint64_t hv;
uint64_t idx;
2008-11-20 23:01:55 +03:00
dmu_buf_impl_t *db;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
hv = dbuf_hash(os, obj, level, blkid);
idx = hv & h->hash_table_mask;
2008-11-20 23:01:55 +03:00
mutex_enter(DBUF_HASH_MUTEX(h, idx));
for (db = h->hash_table[idx]; db != NULL; db = db->db_hash_next) {
if (DBUF_EQUAL(db, os, obj, level, blkid)) {
mutex_enter(&db->db_mtx);
if (db->db_state != DB_EVICTING) {
mutex_exit(DBUF_HASH_MUTEX(h, idx));
return (db);
}
mutex_exit(&db->db_mtx);
}
}
mutex_exit(DBUF_HASH_MUTEX(h, idx));
return (NULL);
}
static dmu_buf_impl_t *
dbuf_find_bonus(objset_t *os, uint64_t object)
{
dnode_t *dn;
dmu_buf_impl_t *db = NULL;
if (dnode_hold(os, object, FTAG, &dn) == 0) {
rw_enter(&dn->dn_struct_rwlock, RW_READER);
if (dn->dn_bonus != NULL) {
db = dn->dn_bonus;
mutex_enter(&db->db_mtx);
}
rw_exit(&dn->dn_struct_rwlock);
dnode_rele(dn, FTAG);
}
return (db);
}
2008-11-20 23:01:55 +03:00
/*
* Insert an entry into the hash table. If there is already an element
* equal to elem in the hash table, then the already existing element
* will be returned and the new element will not be inserted.
* Otherwise returns NULL.
*/
static dmu_buf_impl_t *
dbuf_hash_insert(dmu_buf_impl_t *db)
{
dbuf_hash_table_t *h = &dbuf_hash_table;
objset_t *os = db->db_objset;
2008-11-20 23:01:55 +03:00
uint64_t obj = db->db.db_object;
int level = db->db_level;
uint64_t blkid, hv, idx;
2008-11-20 23:01:55 +03:00
dmu_buf_impl_t *dbf;
uint32_t i;
2008-11-20 23:01:55 +03:00
blkid = db->db_blkid;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
hv = dbuf_hash(os, obj, level, blkid);
idx = hv & h->hash_table_mask;
2008-11-20 23:01:55 +03:00
mutex_enter(DBUF_HASH_MUTEX(h, idx));
for (dbf = h->hash_table[idx], i = 0; dbf != NULL;
dbf = dbf->db_hash_next, i++) {
2008-11-20 23:01:55 +03:00
if (DBUF_EQUAL(dbf, os, obj, level, blkid)) {
mutex_enter(&dbf->db_mtx);
if (dbf->db_state != DB_EVICTING) {
mutex_exit(DBUF_HASH_MUTEX(h, idx));
return (dbf);
}
mutex_exit(&dbf->db_mtx);
}
}
if (i > 0) {
DBUF_STAT_BUMP(hash_collisions);
if (i == 1)
DBUF_STAT_BUMP(hash_chains);
DBUF_STAT_MAX(hash_chain_max, i);
}
2008-11-20 23:01:55 +03:00
mutex_enter(&db->db_mtx);
db->db_hash_next = h->hash_table[idx];
h->hash_table[idx] = db;
mutex_exit(DBUF_HASH_MUTEX(h, idx));
uint64_t he = atomic_inc_64_nv(&dbuf_stats.hash_elements.value.ui64);
DBUF_STAT_MAX(hash_elements_max, he);
2008-11-20 23:01:55 +03:00
return (NULL);
}
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
/*
* This returns whether this dbuf should be stored in the metadata cache, which
* is based on whether it's from one of the dnode types that store data related
* to traversing dataset hierarchies.
*/
static boolean_t
dbuf_include_in_metadata_cache(dmu_buf_impl_t *db)
{
DB_DNODE_ENTER(db);
dmu_object_type_t type = DB_DNODE(db)->dn_type;
DB_DNODE_EXIT(db);
/* Check if this dbuf is one of the types we care about */
if (DMU_OT_IS_METADATA_CACHED(type)) {
/* If we hit this, then we set something up wrong in dmu_ot */
ASSERT(DMU_OT_IS_METADATA(type));
/*
* Sanity check for small-memory systems: don't allocate too
* much memory for this purpose.
*/
if (zfs_refcount_count(
&dbuf_caches[DB_DBUF_METADATA_CACHE].size) >
dbuf_metadata_cache_target_bytes()) {
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
DBUF_STAT_BUMP(metadata_cache_overflow);
return (B_FALSE);
}
return (B_TRUE);
}
return (B_FALSE);
}
2008-11-20 23:01:55 +03:00
/*
* Remove an entry from the hash table. It must be in the EVICTING state.
2008-11-20 23:01:55 +03:00
*/
static void
dbuf_hash_remove(dmu_buf_impl_t *db)
{
dbuf_hash_table_t *h = &dbuf_hash_table;
uint64_t hv, idx;
2008-11-20 23:01:55 +03:00
dmu_buf_impl_t *dbf, **dbp;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
hv = dbuf_hash(db->db_objset, db->db.db_object,
db->db_level, db->db_blkid);
idx = hv & h->hash_table_mask;
2008-11-20 23:01:55 +03:00
/*
* We mustn't hold db_mtx to maintain lock ordering:
2008-11-20 23:01:55 +03:00
* DBUF_HASH_MUTEX > db_mtx.
*/
ASSERT(zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
ASSERT(db->db_state == DB_EVICTING);
ASSERT(!MUTEX_HELD(&db->db_mtx));
mutex_enter(DBUF_HASH_MUTEX(h, idx));
dbp = &h->hash_table[idx];
while ((dbf = *dbp) != db) {
dbp = &dbf->db_hash_next;
ASSERT(dbf != NULL);
}
*dbp = db->db_hash_next;
db->db_hash_next = NULL;
if (h->hash_table[idx] &&
h->hash_table[idx]->db_hash_next == NULL)
DBUF_STAT_BUMPDOWN(hash_chains);
2008-11-20 23:01:55 +03:00
mutex_exit(DBUF_HASH_MUTEX(h, idx));
atomic_dec_64(&dbuf_stats.hash_elements.value.ui64);
2008-11-20 23:01:55 +03:00
}
typedef enum {
DBVU_EVICTING,
DBVU_NOT_EVICTING
} dbvu_verify_type_t;
static void
dbuf_verify_user(dmu_buf_impl_t *db, dbvu_verify_type_t verify_type)
{
#ifdef ZFS_DEBUG
int64_t holds;
if (db->db_user == NULL)
return;
/* Only data blocks support the attachment of user data. */
ASSERT(db->db_level == 0);
/* Clients must resolve a dbuf before attaching user data. */
ASSERT(db->db.db_data != NULL);
ASSERT3U(db->db_state, ==, DB_CACHED);
holds = zfs_refcount_count(&db->db_holds);
if (verify_type == DBVU_EVICTING) {
/*
* Immediate eviction occurs when holds == dirtycnt.
* For normal eviction buffers, holds is zero on
* eviction, except when dbuf_fix_old_data() calls
* dbuf_clear_data(). However, the hold count can grow
* during eviction even though db_mtx is held (see
* dmu_bonus_hold() for an example), so we can only
* test the generic invariant that holds >= dirtycnt.
*/
ASSERT3U(holds, >=, db->db_dirtycnt);
} else {
if (db->db_user_immediate_evict == TRUE)
ASSERT3U(holds, >=, db->db_dirtycnt);
else
ASSERT3U(holds, >, 0);
}
#endif
}
2008-11-20 23:01:55 +03:00
static void
dbuf_evict_user(dmu_buf_impl_t *db)
{
dmu_buf_user_t *dbu = db->db_user;
2008-11-20 23:01:55 +03:00
ASSERT(MUTEX_HELD(&db->db_mtx));
if (dbu == NULL)
2008-11-20 23:01:55 +03:00
return;
dbuf_verify_user(db, DBVU_EVICTING);
db->db_user = NULL;
#ifdef ZFS_DEBUG
if (dbu->dbu_clear_on_evict_dbufp != NULL)
*dbu->dbu_clear_on_evict_dbufp = NULL;
#endif
/*
* There are two eviction callbacks - one that we call synchronously
* and one that we invoke via a taskq. The async one is useful for
* avoiding lock order reversals and limiting stack depth.
*
* Note that if we have a sync callback but no async callback,
* it's likely that the sync callback will free the structure
* containing the dbu. In that case we need to take care to not
* dereference dbu after calling the sync evict func.
*/
boolean_t has_async = (dbu->dbu_evict_func_async != NULL);
if (dbu->dbu_evict_func_sync != NULL)
dbu->dbu_evict_func_sync(dbu);
if (has_async) {
taskq_dispatch_ent(dbu_evict_taskq, dbu->dbu_evict_func_async,
dbu, 0, &dbu->dbu_tqent);
}
2008-11-20 23:01:55 +03:00
}
boolean_t
dbuf_is_metadata(dmu_buf_impl_t *db)
{
/*
* Consider indirect blocks and spill blocks to be meta data.
*/
if (db->db_level > 0 || db->db_blkid == DMU_SPILL_BLKID) {
return (B_TRUE);
} else {
boolean_t is_metadata;
DB_DNODE_ENTER(db);
is_metadata = DMU_OT_IS_METADATA(DB_DNODE(db)->dn_type);
DB_DNODE_EXIT(db);
return (is_metadata);
}
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/*
* This function *must* return indices evenly distributed between all
* sublists of the multilist. This is needed due to how the dbuf eviction
* code is laid out; dbuf_evict_thread() assumes dbufs are evenly
* distributed between all sublists and uses this assumption when
* deciding which sublist to evict from and how much to evict from it.
*/
static unsigned int
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_cache_multilist_index_func(multilist_t *ml, void *obj)
2008-11-20 23:01:55 +03:00
{
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dmu_buf_impl_t *db = obj;
/*
* The assumption here, is the hash value for a given
* dmu_buf_impl_t will remain constant throughout it's lifetime
* (i.e. it's objset, object, level and blkid fields don't change).
* Thus, we don't need to store the dbuf's sublist index
* on insertion, as this index can be recalculated on removal.
*
* Also, the low order bits of the hash value are thought to be
* distributed evenly. Otherwise, in the case that the multilist
* has a power of two number of sublists, each sublists' usage
* would not be evenly distributed.
*/
return (dbuf_hash(db->db_objset, db->db.db_object,
db->db_level, db->db_blkid) %
multilist_get_num_sublists(ml));
}
/*
* The target size of the dbuf cache can grow with the ARC target,
* unless limited by the tunable dbuf_cache_max_bytes.
*/
static inline unsigned long
dbuf_cache_target_bytes(void)
{
return (MIN(dbuf_cache_max_bytes,
arc_target_bytes() >> dbuf_cache_shift));
}
/*
* The target size of the dbuf metadata cache can grow with the ARC target,
* unless limited by the tunable dbuf_metadata_cache_max_bytes.
*/
static inline unsigned long
dbuf_metadata_cache_target_bytes(void)
{
return (MIN(dbuf_metadata_cache_max_bytes,
arc_target_bytes() >> dbuf_metadata_cache_shift));
}
static inline uint64_t
dbuf_cache_hiwater_bytes(void)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
{
uint64_t dbuf_cache_target = dbuf_cache_target_bytes();
return (dbuf_cache_target +
(dbuf_cache_target * dbuf_cache_hiwater_pct) / 100);
}
static inline uint64_t
dbuf_cache_lowater_bytes(void)
{
uint64_t dbuf_cache_target = dbuf_cache_target_bytes();
return (dbuf_cache_target -
(dbuf_cache_target * dbuf_cache_lowater_pct) / 100);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
static inline boolean_t
dbuf_cache_above_lowater(void)
{
return (zfs_refcount_count(&dbuf_caches[DB_DBUF_CACHE].size) >
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
dbuf_cache_lowater_bytes());
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
}
/*
* Evict the oldest eligible dbuf from the dbuf cache.
*/
static void
dbuf_evict_one(void)
{
int idx = multilist_get_random_index(&dbuf_caches[DB_DBUF_CACHE].cache);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
multilist_sublist_t *mls = multilist_sublist_lock(
&dbuf_caches[DB_DBUF_CACHE].cache, idx);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT(!MUTEX_HELD(&dbuf_evict_lock));
dmu_buf_impl_t *db = multilist_sublist_tail(mls);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
while (db != NULL && mutex_tryenter(&db->db_mtx) == 0) {
db = multilist_sublist_prev(mls, db);
}
DTRACE_PROBE2(dbuf__evict__one, dmu_buf_impl_t *, db,
multilist_sublist_t *, mls);
if (db != NULL) {
multilist_sublist_remove(mls, db);
multilist_sublist_unlock(mls);
(void) zfs_refcount_remove_many(
&dbuf_caches[DB_DBUF_CACHE].size, db->db.db_size, db);
DBUF_STAT_BUMPDOWN(cache_levels[db->db_level]);
DBUF_STAT_BUMPDOWN(cache_count);
DBUF_STAT_DECR(cache_levels_bytes[db->db_level],
db->db.db_size);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
ASSERT3U(db->db_caching_status, ==, DB_DBUF_CACHE);
db->db_caching_status = DB_NO_CACHE;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_destroy(db);
DBUF_STAT_BUMP(cache_total_evicts);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
} else {
multilist_sublist_unlock(mls);
}
}
/*
* The dbuf evict thread is responsible for aging out dbufs from the
* cache. Once the cache has reached it's maximum size, dbufs are removed
* and destroyed. The eviction thread will continue running until the size
* of the dbuf cache is at or below the maximum size. Once the dbuf is aged
* out of the cache it is destroyed and becomes eligible for arc eviction.
*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 22:46:35 +03:00
/* ARGSUSED */
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
static void
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 18:51:44 +03:00
dbuf_evict_thread(void *unused)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
{
callb_cpr_t cpr;
CALLB_CPR_INIT(&cpr, &dbuf_evict_lock, callb_generic_cpr, FTAG);
mutex_enter(&dbuf_evict_lock);
while (!dbuf_evict_thread_exit) {
while (!dbuf_cache_above_lowater() && !dbuf_evict_thread_exit) {
CALLB_CPR_SAFE_BEGIN(&cpr);
(void) cv_timedwait_idle_hires(&dbuf_evict_cv,
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
&dbuf_evict_lock, SEC2NSEC(1), MSEC2NSEC(1), 0);
CALLB_CPR_SAFE_END(&cpr, &dbuf_evict_lock);
}
mutex_exit(&dbuf_evict_lock);
/*
* Keep evicting as long as we're above the low water mark
* for the cache. We do this without holding the locks to
* minimize lock contention.
*/
while (dbuf_cache_above_lowater() && !dbuf_evict_thread_exit) {
dbuf_evict_one();
}
mutex_enter(&dbuf_evict_lock);
}
dbuf_evict_thread_exit = B_FALSE;
cv_broadcast(&dbuf_evict_cv);
CALLB_CPR_EXIT(&cpr); /* drops dbuf_evict_lock */
thread_exit();
}
/*
* Wake up the dbuf eviction thread if the dbuf cache is at its max size.
* If the dbuf cache is at its high water mark, then evict a dbuf from the
* dbuf cache using the callers context.
*/
static void
dbuf_evict_notify(uint64_t size)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
{
/*
* We check if we should evict without holding the dbuf_evict_lock,
* because it's OK to occasionally make the wrong decision here,
* and grabbing the lock results in massive lock contention.
*/
if (size > dbuf_cache_target_bytes()) {
if (size > dbuf_cache_hiwater_bytes())
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_evict_one();
cv_signal(&dbuf_evict_cv);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
}
2008-11-20 23:01:55 +03:00
}
static int
dbuf_kstat_update(kstat_t *ksp, int rw)
{
dbuf_stats_t *ds = ksp->ks_data;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (rw == KSTAT_WRITE)
return (SET_ERROR(EACCES));
ds->cache_count.value.ui64 =
wmsum_value(&dbuf_sums.cache_count);
ds->cache_size_bytes.value.ui64 =
zfs_refcount_count(&dbuf_caches[DB_DBUF_CACHE].size);
ds->cache_target_bytes.value.ui64 = dbuf_cache_target_bytes();
ds->cache_hiwater_bytes.value.ui64 = dbuf_cache_hiwater_bytes();
ds->cache_lowater_bytes.value.ui64 = dbuf_cache_lowater_bytes();
ds->cache_total_evicts.value.ui64 =
wmsum_value(&dbuf_sums.cache_total_evicts);
for (int i = 0; i < DN_MAX_LEVELS; i++) {
ds->cache_levels[i].value.ui64 =
wmsum_value(&dbuf_sums.cache_levels[i]);
ds->cache_levels_bytes[i].value.ui64 =
wmsum_value(&dbuf_sums.cache_levels_bytes[i]);
}
ds->hash_hits.value.ui64 =
wmsum_value(&dbuf_sums.hash_hits);
ds->hash_misses.value.ui64 =
wmsum_value(&dbuf_sums.hash_misses);
ds->hash_collisions.value.ui64 =
wmsum_value(&dbuf_sums.hash_collisions);
ds->hash_chains.value.ui64 =
wmsum_value(&dbuf_sums.hash_chains);
ds->hash_insert_race.value.ui64 =
wmsum_value(&dbuf_sums.hash_insert_race);
ds->metadata_cache_count.value.ui64 =
wmsum_value(&dbuf_sums.metadata_cache_count);
ds->metadata_cache_size_bytes.value.ui64 = zfs_refcount_count(
&dbuf_caches[DB_DBUF_METADATA_CACHE].size);
ds->metadata_cache_overflow.value.ui64 =
wmsum_value(&dbuf_sums.metadata_cache_overflow);
return (0);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
2008-11-20 23:01:55 +03:00
void
dbuf_init(void)
{
uint64_t hsize = 1ULL << 16;
dbuf_hash_table_t *h = &dbuf_hash_table;
int i;
/*
* The hash table is big enough to fill all of physical memory
* with an average block size of zfs_arc_average_blocksize (default 8K).
* By default, the table will take up
* totalmem * sizeof(void*) / 8K (1MB per GB with 8-byte pointers).
2008-11-20 23:01:55 +03:00
*/
while (hsize * zfs_arc_average_blocksize < physmem * PAGESIZE)
2008-11-20 23:01:55 +03:00
hsize <<= 1;
retry:
h->hash_table_mask = hsize - 1;
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 04:53:18 +03:00
#if defined(_KERNEL)
/*
* Large allocations which do not require contiguous pages
* should be using vmem_alloc() in the linux kernel
*/
h->hash_table = vmem_zalloc(hsize * sizeof (void *), KM_SLEEP);
#else
2008-11-20 23:01:55 +03:00
h->hash_table = kmem_zalloc(hsize * sizeof (void *), KM_NOSLEEP);
#endif
2008-11-20 23:01:55 +03:00
if (h->hash_table == NULL) {
/* XXX - we should really return an error instead of assert */
ASSERT(hsize > (1ULL << 10));
hsize >>= 1;
goto retry;
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_kmem_cache = kmem_cache_create("dmu_buf_impl_t",
2008-11-20 23:01:55 +03:00
sizeof (dmu_buf_impl_t),
0, dbuf_cons, dbuf_dest, NULL, NULL, NULL, 0);
for (i = 0; i < DBUF_MUTEXES; i++)
mutex_init(&h->hash_mutexes[i], NULL, MUTEX_DEFAULT, NULL);
dbuf_stats_init(h);
/*
* All entries are queued via taskq_dispatch_ent(), so min/maxalloc
* configuration is not required.
*/
Align thread priority with Linux defaults Under Linux filesystem threads responsible for handling I/O are normally created with the maximum priority. Non-I/O filesystem processes run with the default priority. ZFS should adopt the same priority scheme under Linux to maintain good performance and so that it will complete fairly when other Linux filesystems are active. The priorities have been updated to the following: $ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta' - TS 10743 19 -20 [spl_kmem_cache] - TS 10744 19 -20 [spl_system_task] - TS 10745 19 -20 [spl_dynamic_tas] - TS 10764 19 0 [dbu_evict] - TS 10765 19 0 [arc_prune] - TS 10766 19 0 [arc_reclaim] - TS 10767 19 0 [arc_user_evicts] - TS 10768 19 0 [l2arc_feed] - TS 10769 39 0 [z_unmount] - TS 10770 39 -20 [zvol] - TS 11011 39 -20 [z_null_iss] - TS 11012 39 -20 [z_null_int] - TS 11013 39 -20 [z_rd_iss] - TS 11014 39 -20 [z_rd_int_0] - TS 11022 38 -19 [z_wr_iss] - TS 11023 39 -20 [z_wr_iss_h] - TS 11024 39 -20 [z_wr_int_0] - TS 11032 39 -20 [z_wr_int_h] - TS 11033 39 -20 [z_fr_iss_0] - TS 11041 39 -20 [z_fr_int] - TS 11042 39 -20 [z_cl_iss] - TS 11043 39 -20 [z_cl_int] - TS 11044 39 -20 [z_ioctl_iss] - TS 11045 39 -20 [z_ioctl_int] - TS 11046 39 -20 [metaslab_group_] - TS 11050 19 0 [z_iput] - TS 11121 38 -19 [z_wr_iss] Note that under Linux the meaning of a processes priority is inverted with respect to illumos. High values on Linux indicate a _low_ priority while high value on illumos indicate a _high_ priority. In order to preserve the logical meaning of the minclsyspri and maxclsyspri macros when they are used by the illumos wrapper functions their values have been inverted. This way when changes are merged from upstream illumos we won't need to remember to invert the macro. It could also lead to confusion. This patch depends on https://github.com/zfsonlinux/spl/pull/466. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3607
2015-07-24 20:08:31 +03:00
dbu_evict_taskq = taskq_create("dbu_evict", 1, defclsyspri, 0, 0, 0);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
for (dbuf_cached_state_t dcs = 0; dcs < DB_CACHE_MAX; dcs++) {
multilist_create(&dbuf_caches[dcs].cache,
sizeof (dmu_buf_impl_t),
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
offsetof(dmu_buf_impl_t, db_cache_link),
dbuf_cache_multilist_index_func);
zfs_refcount_create(&dbuf_caches[dcs].size);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_evict_thread_exit = B_FALSE;
mutex_init(&dbuf_evict_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&dbuf_evict_cv, NULL, CV_DEFAULT, NULL);
dbuf_cache_evict_thread = thread_create(NULL, 0, dbuf_evict_thread,
NULL, 0, &p0, TS_RUN, minclsyspri);
wmsum_init(&dbuf_sums.cache_count, 0);
wmsum_init(&dbuf_sums.cache_total_evicts, 0);
for (i = 0; i < DN_MAX_LEVELS; i++) {
wmsum_init(&dbuf_sums.cache_levels[i], 0);
wmsum_init(&dbuf_sums.cache_levels_bytes[i], 0);
}
wmsum_init(&dbuf_sums.hash_hits, 0);
wmsum_init(&dbuf_sums.hash_misses, 0);
wmsum_init(&dbuf_sums.hash_collisions, 0);
wmsum_init(&dbuf_sums.hash_chains, 0);
wmsum_init(&dbuf_sums.hash_insert_race, 0);
wmsum_init(&dbuf_sums.metadata_cache_count, 0);
wmsum_init(&dbuf_sums.metadata_cache_overflow, 0);
dbuf_ksp = kstat_create("zfs", 0, "dbufstats", "misc",
KSTAT_TYPE_NAMED, sizeof (dbuf_stats) / sizeof (kstat_named_t),
KSTAT_FLAG_VIRTUAL);
if (dbuf_ksp != NULL) {
for (i = 0; i < DN_MAX_LEVELS; i++) {
snprintf(dbuf_stats.cache_levels[i].name,
KSTAT_STRLEN, "cache_level_%d", i);
dbuf_stats.cache_levels[i].data_type =
KSTAT_DATA_UINT64;
snprintf(dbuf_stats.cache_levels_bytes[i].name,
KSTAT_STRLEN, "cache_level_%d_bytes", i);
dbuf_stats.cache_levels_bytes[i].data_type =
KSTAT_DATA_UINT64;
}
dbuf_ksp->ks_data = &dbuf_stats;
dbuf_ksp->ks_update = dbuf_kstat_update;
kstat_install(dbuf_ksp);
}
2008-11-20 23:01:55 +03:00
}
void
dbuf_fini(void)
{
dbuf_hash_table_t *h = &dbuf_hash_table;
int i;
dbuf_stats_destroy();
2008-11-20 23:01:55 +03:00
for (i = 0; i < DBUF_MUTEXES; i++)
mutex_destroy(&h->hash_mutexes[i]);
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 04:53:18 +03:00
#if defined(_KERNEL)
/*
* Large allocations which do not require contiguous pages
* should be using vmem_free() in the linux kernel
*/
vmem_free(h->hash_table, (h->hash_table_mask + 1) * sizeof (void *));
#else
2008-11-20 23:01:55 +03:00
kmem_free(h->hash_table, (h->hash_table_mask + 1) * sizeof (void *));
#endif
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
kmem_cache_destroy(dbuf_kmem_cache);
taskq_destroy(dbu_evict_taskq);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
mutex_enter(&dbuf_evict_lock);
dbuf_evict_thread_exit = B_TRUE;
while (dbuf_evict_thread_exit) {
cv_signal(&dbuf_evict_cv);
cv_wait(&dbuf_evict_cv, &dbuf_evict_lock);
}
mutex_exit(&dbuf_evict_lock);
mutex_destroy(&dbuf_evict_lock);
cv_destroy(&dbuf_evict_cv);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
for (dbuf_cached_state_t dcs = 0; dcs < DB_CACHE_MAX; dcs++) {
zfs_refcount_destroy(&dbuf_caches[dcs].size);
multilist_destroy(&dbuf_caches[dcs].cache);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
}
if (dbuf_ksp != NULL) {
kstat_delete(dbuf_ksp);
dbuf_ksp = NULL;
}
wmsum_fini(&dbuf_sums.cache_count);
wmsum_fini(&dbuf_sums.cache_total_evicts);
for (i = 0; i < DN_MAX_LEVELS; i++) {
wmsum_fini(&dbuf_sums.cache_levels[i]);
wmsum_fini(&dbuf_sums.cache_levels_bytes[i]);
}
wmsum_fini(&dbuf_sums.hash_hits);
wmsum_fini(&dbuf_sums.hash_misses);
wmsum_fini(&dbuf_sums.hash_collisions);
wmsum_fini(&dbuf_sums.hash_chains);
wmsum_fini(&dbuf_sums.hash_insert_race);
wmsum_fini(&dbuf_sums.metadata_cache_count);
wmsum_fini(&dbuf_sums.metadata_cache_overflow);
2008-11-20 23:01:55 +03:00
}
/*
* Other stuff.
*/
#ifdef ZFS_DEBUG
static void
dbuf_verify(dmu_buf_impl_t *db)
{
dnode_t *dn;
dbuf_dirty_record_t *dr;
uint32_t txg_prev;
2008-11-20 23:01:55 +03:00
ASSERT(MUTEX_HELD(&db->db_mtx));
if (!(zfs_flags & ZFS_DEBUG_DBUF_VERIFY))
return;
ASSERT(db->db_objset != NULL);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
2008-11-20 23:01:55 +03:00
if (dn == NULL) {
ASSERT(db->db_parent == NULL);
ASSERT(db->db_blkptr == NULL);
} else {
ASSERT3U(db->db.db_object, ==, dn->dn_object);
ASSERT3P(db->db_objset, ==, dn->dn_objset);
ASSERT3U(db->db_level, <, dn->dn_nlevels);
ASSERT(db->db_blkid == DMU_BONUS_BLKID ||
db->db_blkid == DMU_SPILL_BLKID ||
!avl_is_empty(&dn->dn_dbufs));
2008-11-20 23:01:55 +03:00
}
if (db->db_blkid == DMU_BONUS_BLKID) {
ASSERT(dn != NULL);
ASSERT3U(db->db.db_size, >=, dn->dn_bonuslen);
ASSERT3U(db->db.db_offset, ==, DMU_BONUS_BLKID);
} else if (db->db_blkid == DMU_SPILL_BLKID) {
2008-11-20 23:01:55 +03:00
ASSERT(dn != NULL);
ASSERT0(db->db.db_offset);
2008-11-20 23:01:55 +03:00
} else {
ASSERT3U(db->db.db_offset, ==, db->db_blkid * db->db.db_size);
}
if ((dr = list_head(&db->db_dirty_records)) != NULL) {
ASSERT(dr->dr_dbuf == db);
txg_prev = dr->dr_txg;
for (dr = list_next(&db->db_dirty_records, dr); dr != NULL;
dr = list_next(&db->db_dirty_records, dr)) {
ASSERT(dr->dr_dbuf == db);
ASSERT(txg_prev > dr->dr_txg);
txg_prev = dr->dr_txg;
}
}
/*
* We can't assert that db_size matches dn_datablksz because it
* can be momentarily different when another thread is doing
* dnode_set_blksz().
*/
if (db->db_level == 0 && db->db.db_object == DMU_META_DNODE_OBJECT) {
dr = db->db_data_pending;
/*
* It should only be modified in syncing context, so
* make sure we only have one copy of the data.
*/
ASSERT(dr == NULL || dr->dt.dl.dr_data == db->db_buf);
2008-11-20 23:01:55 +03:00
}
/* verify db->db_blkptr */
if (db->db_blkptr) {
if (db->db_parent == dn->dn_dbuf) {
/* db is pointed to by the dnode */
/* ASSERT3U(db->db_blkid, <, dn->dn_nblkptr); */
2009-07-03 02:44:48 +04:00
if (DMU_OBJECT_IS_SPECIAL(db->db.db_object))
2008-11-20 23:01:55 +03:00
ASSERT(db->db_parent == NULL);
else
ASSERT(db->db_parent != NULL);
if (db->db_blkid != DMU_SPILL_BLKID)
ASSERT3P(db->db_blkptr, ==,
&dn->dn_phys->dn_blkptr[db->db_blkid]);
2008-11-20 23:01:55 +03:00
} else {
/* db is pointed to by an indirect block */
int epb __maybe_unused = db->db_parent->db.db_size >>
SPA_BLKPTRSHIFT;
2008-11-20 23:01:55 +03:00
ASSERT3U(db->db_parent->db_level, ==, db->db_level+1);
ASSERT3U(db->db_parent->db.db_object, ==,
db->db.db_object);
/*
* dnode_grow_indblksz() can make this fail if we don't
* have the parent's rwlock. XXX indblksz no longer
2008-11-20 23:01:55 +03:00
* grows. safe to do this now?
*/
if (RW_LOCK_HELD(&db->db_parent->db_rwlock)) {
2008-11-20 23:01:55 +03:00
ASSERT3P(db->db_blkptr, ==,
((blkptr_t *)db->db_parent->db.db_data +
db->db_blkid % epb));
}
}
}
if ((db->db_blkptr == NULL || BP_IS_HOLE(db->db_blkptr)) &&
(db->db_buf == NULL || db->db_buf->b_data) &&
db->db.db_data && db->db_blkid != DMU_BONUS_BLKID &&
2008-11-20 23:01:55 +03:00
db->db_state != DB_FILL && !dn->dn_free_txg) {
/*
* If the blkptr isn't set but they have nonzero data,
* it had better be dirty, otherwise we'll lose that
* data when we evict this buffer.
*
* There is an exception to this rule for indirect blocks; in
* this case, if the indirect block is a hole, we fill in a few
* fields on each of the child blocks (importantly, birth time)
* to prevent hole birth times from being lost when you
* partially fill in a hole.
2008-11-20 23:01:55 +03:00
*/
if (db->db_dirtycnt == 0) {
if (db->db_level == 0) {
uint64_t *buf = db->db.db_data;
int i;
2008-11-20 23:01:55 +03:00
for (i = 0; i < db->db.db_size >> 3; i++) {
ASSERT(buf[i] == 0);
}
} else {
blkptr_t *bps = db->db.db_data;
ASSERT3U(1 << DB_DNODE(db)->dn_indblkshift, ==,
db->db.db_size);
/*
* We want to verify that all the blkptrs in the
* indirect block are holes, but we may have
* automatically set up a few fields for them.
* We iterate through each blkptr and verify
* they only have those fields set.
*/
for (int i = 0;
i < db->db.db_size / sizeof (blkptr_t);
i++) {
blkptr_t *bp = &bps[i];
ASSERT(ZIO_CHECKSUM_IS_ZERO(
&bp->blk_cksum));
ASSERT(
DVA_IS_EMPTY(&bp->blk_dva[0]) &&
DVA_IS_EMPTY(&bp->blk_dva[1]) &&
DVA_IS_EMPTY(&bp->blk_dva[2]));
ASSERT0(bp->blk_fill);
ASSERT0(bp->blk_pad[0]);
ASSERT0(bp->blk_pad[1]);
ASSERT(!BP_IS_EMBEDDED(bp));
ASSERT(BP_IS_HOLE(bp));
ASSERT0(bp->blk_phys_birth);
}
2008-11-20 23:01:55 +03:00
}
}
}
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
}
#endif
static void
dbuf_clear_data(dmu_buf_impl_t *db)
{
ASSERT(MUTEX_HELD(&db->db_mtx));
dbuf_evict_user(db);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT3P(db->db_buf, ==, NULL);
db->db.db_data = NULL;
if (db->db_state != DB_NOFILL) {
db->db_state = DB_UNCACHED;
DTRACE_SET_STATE(db, "clear data");
}
}
2008-11-20 23:01:55 +03:00
static void
dbuf_set_data(dmu_buf_impl_t *db, arc_buf_t *buf)
{
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(buf != NULL);
2008-11-20 23:01:55 +03:00
db->db_buf = buf;
ASSERT(buf->b_data != NULL);
db->db.db_data = buf->b_data;
2008-11-20 23:01:55 +03:00
}
static arc_buf_t *
dbuf_alloc_arcbuf(dmu_buf_impl_t *db)
{
spa_t *spa = db->db_objset->os_spa;
return (arc_alloc_buf(spa, db, DBUF_GET_BUFC_TYPE(db), db->db.db_size));
}
/*
* Loan out an arc_buf for read. Return the loaned arc_buf.
*/
arc_buf_t *
dbuf_loan_arcbuf(dmu_buf_impl_t *db)
{
arc_buf_t *abuf;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
mutex_enter(&db->db_mtx);
if (arc_released(db->db_buf) || zfs_refcount_count(&db->db_holds) > 1) {
int blksz = db->db.db_size;
spa_t *spa = db->db_objset->os_spa;
mutex_exit(&db->db_mtx);
abuf = arc_loan_buf(spa, B_FALSE, blksz);
bcopy(db->db.db_data, abuf->b_data, blksz);
} else {
abuf = db->db_buf;
arc_loan_inuse_buf(abuf, db);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
db->db_buf = NULL;
dbuf_clear_data(db);
mutex_exit(&db->db_mtx);
}
return (abuf);
}
/*
* Calculate which level n block references the data at the level 0 offset
* provided.
*/
2008-11-20 23:01:55 +03:00
uint64_t
dbuf_whichblock(const dnode_t *dn, const int64_t level, const uint64_t offset)
2008-11-20 23:01:55 +03:00
{
if (dn->dn_datablkshift != 0 && dn->dn_indblkshift != 0) {
/*
* The level n blkid is equal to the level 0 blkid divided by
* the number of level 0s in a level n block.
*
* The level 0 blkid is offset >> datablkshift =
* offset / 2^datablkshift.
*
* The number of level 0s in a level n is the number of block
* pointers in an indirect block, raised to the power of level.
* This is 2^(indblkshift - SPA_BLKPTRSHIFT)^level =
* 2^(level*(indblkshift - SPA_BLKPTRSHIFT)).
*
* Thus, the level n blkid is: offset /
* ((2^datablkshift)*(2^(level*(indblkshift-SPA_BLKPTRSHIFT))))
* = offset / 2^(datablkshift + level *
* (indblkshift - SPA_BLKPTRSHIFT))
* = offset >> (datablkshift + level *
* (indblkshift - SPA_BLKPTRSHIFT))
*/
const unsigned exp = dn->dn_datablkshift +
level * (dn->dn_indblkshift - SPA_BLKPTRSHIFT);
if (exp >= 8 * sizeof (offset)) {
/* This only happens on the highest indirection level */
ASSERT3U(level, ==, dn->dn_nlevels - 1);
return (0);
}
ASSERT3U(exp, <, 8 * sizeof (offset));
return (offset >> exp);
2008-11-20 23:01:55 +03:00
} else {
ASSERT3U(offset, <, dn->dn_datablksz);
return (0);
}
}
/*
* This function is used to lock the parent of the provided dbuf. This should be
* used when modifying or reading db_blkptr.
*/
db_lock_type_t
dmu_buf_lock_parent(dmu_buf_impl_t *db, krw_t rw, void *tag)
{
enum db_lock_type ret = DLT_NONE;
if (db->db_parent != NULL) {
rw_enter(&db->db_parent->db_rwlock, rw);
ret = DLT_PARENT;
} else if (dmu_objset_ds(db->db_objset) != NULL) {
rrw_enter(&dmu_objset_ds(db->db_objset)->ds_bp_rwlock, rw,
tag);
ret = DLT_OBJSET;
}
/*
* We only return a DLT_NONE lock when it's the top-most indirect block
* of the meta-dnode of the MOS.
*/
return (ret);
}
/*
* We need to pass the lock type in because it's possible that the block will
* move from being the topmost indirect block in a dnode (and thus, have no
* parent) to not the top-most via an indirection increase. This would cause a
* panic if we didn't pass the lock type in.
*/
void
dmu_buf_unlock_parent(dmu_buf_impl_t *db, db_lock_type_t type, void *tag)
{
if (type == DLT_PARENT)
rw_exit(&db->db_parent->db_rwlock);
else if (type == DLT_OBJSET)
rrw_exit(&dmu_objset_ds(db->db_objset)->ds_bp_rwlock, tag);
}
2008-11-20 23:01:55 +03:00
static void
dbuf_read_done(zio_t *zio, const zbookmark_phys_t *zb, const blkptr_t *bp,
arc_buf_t *buf, void *vdb)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db = vdb;
mutex_enter(&db->db_mtx);
ASSERT3U(db->db_state, ==, DB_READ);
/*
* All reads are synchronous, so we must have a hold on the dbuf
*/
ASSERT(zfs_refcount_count(&db->db_holds) > 0);
2008-11-20 23:01:55 +03:00
ASSERT(db->db_buf == NULL);
ASSERT(db->db.db_data == NULL);
if (buf == NULL) {
/* i/o error */
ASSERT(zio == NULL || zio->io_error != 0);
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
ASSERT3P(db->db_buf, ==, NULL);
db->db_state = DB_UNCACHED;
DTRACE_SET_STATE(db, "i/o error");
} else if (db->db_level == 0 && db->db_freed_in_flight) {
/* freed in flight */
ASSERT(zio == NULL || zio->io_error == 0);
2008-11-20 23:01:55 +03:00
arc_release(buf, db);
bzero(buf->b_data, db->db.db_size);
arc_buf_freeze(buf);
db->db_freed_in_flight = FALSE;
dbuf_set_data(db, buf);
db->db_state = DB_CACHED;
DTRACE_SET_STATE(db, "freed in flight");
} else {
/* success */
ASSERT(zio == NULL || zio->io_error == 0);
2008-11-20 23:01:55 +03:00
dbuf_set_data(db, buf);
db->db_state = DB_CACHED;
DTRACE_SET_STATE(db, "successful read");
2008-11-20 23:01:55 +03:00
}
cv_broadcast(&db->db_changed);
dbuf_rele_and_unlock(db, NULL, B_FALSE);
2008-11-20 23:01:55 +03:00
}
/*
* Shortcut for performing reads on bonus dbufs. Returns
* an error if we fail to verify the dnode associated with
* a decrypted block. Otherwise success.
*/
static int
dbuf_read_bonus(dmu_buf_impl_t *db, dnode_t *dn, uint32_t flags)
{
int bonuslen, max_bonuslen, err;
err = dbuf_read_verify_dnode_crypt(db, flags);
if (err)
return (err);
bonuslen = MIN(dn->dn_bonuslen, dn->dn_phys->dn_bonuslen);
max_bonuslen = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots);
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(DB_DNODE_HELD(db));
ASSERT3U(bonuslen, <=, db->db.db_size);
db->db.db_data = kmem_alloc(max_bonuslen, KM_SLEEP);
arc_space_consume(max_bonuslen, ARC_SPACE_BONUS);
if (bonuslen < max_bonuslen)
bzero(db->db.db_data, max_bonuslen);
if (bonuslen)
bcopy(DN_BONUS(dn->dn_phys), db->db.db_data, bonuslen);
db->db_state = DB_CACHED;
DTRACE_SET_STATE(db, "bonus buffer filled");
return (0);
}
static void
dbuf_handle_indirect_hole(dmu_buf_impl_t *db, dnode_t *dn)
{
blkptr_t *bps = db->db.db_data;
uint32_t indbs = 1ULL << dn->dn_indblkshift;
int n_bps = indbs >> SPA_BLKPTRSHIFT;
for (int i = 0; i < n_bps; i++) {
blkptr_t *bp = &bps[i];
ASSERT3U(BP_GET_LSIZE(db->db_blkptr), ==, indbs);
BP_SET_LSIZE(bp, BP_GET_LEVEL(db->db_blkptr) == 1 ?
dn->dn_datablksz : BP_GET_LSIZE(db->db_blkptr));
BP_SET_TYPE(bp, BP_GET_TYPE(db->db_blkptr));
BP_SET_LEVEL(bp, BP_GET_LEVEL(db->db_blkptr) - 1);
BP_SET_BIRTH(bp, db->db_blkptr->blk_birth, 0);
}
}
/*
* Handle reads on dbufs that are holes, if necessary. This function
* requires that the dbuf's mutex is held. Returns success (0) if action
* was taken, ENOENT if no action was taken.
*/
static int
dbuf_read_hole(dmu_buf_impl_t *db, dnode_t *dn, uint32_t flags)
{
ASSERT(MUTEX_HELD(&db->db_mtx));
int is_hole = db->db_blkptr == NULL || BP_IS_HOLE(db->db_blkptr);
/*
* For level 0 blocks only, if the above check fails:
* Recheck BP_IS_HOLE() after dnode_block_freed() in case dnode_sync()
* processes the delete record and clears the bp while we are waiting
* for the dn_mtx (resulting in a "no" from block_freed).
*/
if (!is_hole && db->db_level == 0) {
is_hole = dnode_block_freed(dn, db->db_blkid) ||
BP_IS_HOLE(db->db_blkptr);
}
if (is_hole) {
dbuf_set_data(db, dbuf_alloc_arcbuf(db));
bzero(db->db.db_data, db->db.db_size);
if (db->db_blkptr != NULL && db->db_level > 0 &&
BP_IS_HOLE(db->db_blkptr) &&
db->db_blkptr->blk_birth != 0) {
dbuf_handle_indirect_hole(db, dn);
}
db->db_state = DB_CACHED;
DTRACE_SET_STATE(db, "hole read satisfied");
return (0);
}
return (ENOENT);
}
/*
* This function ensures that, when doing a decrypting read of a block,
* we make sure we have decrypted the dnode associated with it. We must do
* this so that we ensure we are fully authenticating the checksum-of-MACs
* tree from the root of the objset down to this block. Indirect blocks are
* always verified against their secure checksum-of-MACs assuming that the
* dnode containing them is correct. Now that we are doing a decrypting read,
* we can be sure that the key is loaded and verify that assumption. This is
* especially important considering that we always read encrypted dnode
* blocks as raw data (without verifying their MACs) to start, and
* decrypt / authenticate them when we need to read an encrypted bonus buffer.
*/
static int
dbuf_read_verify_dnode_crypt(dmu_buf_impl_t *db, uint32_t flags)
{
int err = 0;
objset_t *os = db->db_objset;
arc_buf_t *dnode_abuf;
dnode_t *dn;
zbookmark_phys_t zb;
ASSERT(MUTEX_HELD(&db->db_mtx));
if (!os->os_encrypted || os->os_raw_receive ||
(flags & DB_RF_NO_DECRYPT) != 0)
return (0);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
dnode_abuf = (dn->dn_dbuf != NULL) ? dn->dn_dbuf->db_buf : NULL;
if (dnode_abuf == NULL || !arc_is_encrypted(dnode_abuf)) {
DB_DNODE_EXIT(db);
return (0);
}
SET_BOOKMARK(&zb, dmu_objset_id(os),
DMU_META_DNODE_OBJECT, 0, dn->dn_dbuf->db_blkid);
err = arc_untransform(dnode_abuf, os->os_spa, &zb, B_TRUE);
/*
* An error code of EACCES tells us that the key is still not
* available. This is ok if we are only reading authenticated
* (and therefore non-encrypted) blocks.
*/
if (err == EACCES && ((db->db_blkid != DMU_BONUS_BLKID &&
!DMU_OT_IS_ENCRYPTED(dn->dn_type)) ||
(db->db_blkid == DMU_BONUS_BLKID &&
!DMU_OT_IS_ENCRYPTED(dn->dn_bonustype))))
err = 0;
DB_DNODE_EXIT(db);
return (err);
}
/*
* Drops db_mtx and the parent lock specified by dblt and tag before
* returning.
*/
static int
dbuf_read_impl(dmu_buf_impl_t *db, zio_t *zio, uint32_t flags,
db_lock_type_t dblt, void *tag)
2008-11-20 23:01:55 +03:00
{
dnode_t *dn;
zbookmark_phys_t zb;
uint32_t aflags = ARC_FLAG_NOWAIT;
int err, zio_flags;
boolean_t bonus_read;
2008-11-20 23:01:55 +03:00
err = zio_flags = 0;
bonus_read = B_FALSE;
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(db->db_state == DB_UNCACHED);
ASSERT(db->db_buf == NULL);
ASSERT(db->db_parent == NULL ||
RW_LOCK_HELD(&db->db_parent->db_rwlock));
2008-11-20 23:01:55 +03:00
if (db->db_blkid == DMU_BONUS_BLKID) {
err = dbuf_read_bonus(db, dn, flags);
goto early_unlock;
2008-11-20 23:01:55 +03:00
}
err = dbuf_read_hole(db, dn, flags);
if (err == 0)
goto early_unlock;
2008-11-20 23:01:55 +03:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* Any attempt to read a redacted block should result in an error. This
* will never happen under normal conditions, but can be useful for
* debugging purposes.
*/
if (BP_IS_REDACTED(db->db_blkptr)) {
ASSERT(dsl_dataset_feature_is_active(
db->db_objset->os_dsl_dataset,
SPA_FEATURE_REDACTED_DATASETS));
err = SET_ERROR(EIO);
goto early_unlock;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
}
SET_BOOKMARK(&zb, dmu_objset_id(db->db_objset),
db->db.db_object, db->db_level, db->db_blkid);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* All bps of an encrypted os should have the encryption bit set.
* If this is not true it indicates tampering and we report an error.
*/
if (db->db_objset->os_encrypted && !BP_USES_CRYPT(db->db_blkptr)) {
spa_log_error(db->db_objset->os_spa, &zb);
zfs_panic_recover("unencrypted block in encrypted "
"object set %llu", dmu_objset_id(db->db_objset));
err = SET_ERROR(EIO);
goto early_unlock;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
}
err = dbuf_read_verify_dnode_crypt(db, flags);
if (err != 0)
goto early_unlock;
DB_DNODE_EXIT(db);
db->db_state = DB_READ;
DTRACE_SET_STATE(db, "read issued");
mutex_exit(&db->db_mtx);
if (DBUF_IS_L2CACHEABLE(db))
aflags |= ARC_FLAG_L2CACHE;
2008-11-20 23:01:55 +03:00
dbuf_add_ref(db, NULL);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
zio_flags = (flags & DB_RF_CANFAIL) ?
ZIO_FLAG_CANFAIL : ZIO_FLAG_MUSTSUCCEED;
if ((flags & DB_RF_NO_DECRYPT) && BP_IS_PROTECTED(db->db_blkptr))
zio_flags |= ZIO_FLAG_RAW;
/*
* The zio layer will copy the provided blkptr later, but we need to
* do this now so that we can release the parent's rwlock. We have to
* do that now so that if dbuf_read_done is called synchronously (on
* an l1 cache hit) we don't acquire the db_mtx while holding the
* parent's rwlock, which would be a lock ordering violation.
*/
blkptr_t bp = *db->db_blkptr;
dmu_buf_unlock_parent(db, dblt, tag);
(void) arc_read(zio, db->db_objset->os_spa, &bp,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dbuf_read_done, db, ZIO_PRIORITY_SYNC_READ, zio_flags,
2008-11-20 23:01:55 +03:00
&aflags, &zb);
return (err);
early_unlock:
DB_DNODE_EXIT(db);
mutex_exit(&db->db_mtx);
dmu_buf_unlock_parent(db, dblt, tag);
return (err);
2008-11-20 23:01:55 +03:00
}
/*
* This is our just-in-time copy function. It makes a copy of buffers that
* have been modified in a previous transaction group before we access them in
* the current active group.
*
* This function is used in three places: when we are dirtying a buffer for the
* first time in a txg, when we are freeing a range in a dnode that includes
* this buffer, and when we are accessing a buffer which was received compressed
* and later referenced in a WRITE_BYREF record.
*
* Note that when we are called from dbuf_free_range() we do not put a hold on
* the buffer, we just traverse the active dbuf list for the dnode.
*/
static void
dbuf_fix_old_data(dmu_buf_impl_t *db, uint64_t txg)
{
dbuf_dirty_record_t *dr = list_head(&db->db_dirty_records);
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(db->db.db_data != NULL);
ASSERT(db->db_level == 0);
ASSERT(db->db.db_object != DMU_META_DNODE_OBJECT);
if (dr == NULL ||
(dr->dt.dl.dr_data !=
((db->db_blkid == DMU_BONUS_BLKID) ? db->db.db_data : db->db_buf)))
return;
/*
* If the last dirty record for this dbuf has not yet synced
* and its referencing the dbuf data, either:
* reset the reference to point to a new copy,
* or (if there a no active holders)
* just null out the current db_data pointer.
*/
ASSERT3U(dr->dr_txg, >=, txg - 2);
if (db->db_blkid == DMU_BONUS_BLKID) {
dnode_t *dn = DB_DNODE(db);
int bonuslen = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots);
dr->dt.dl.dr_data = kmem_alloc(bonuslen, KM_SLEEP);
arc_space_consume(bonuslen, ARC_SPACE_BONUS);
bcopy(db->db.db_data, dr->dt.dl.dr_data, bonuslen);
} else if (zfs_refcount_count(&db->db_holds) > db->db_dirtycnt) {
dnode_t *dn = DB_DNODE(db);
int size = arc_buf_size(db->db_buf);
arc_buf_contents_t type = DBUF_GET_BUFC_TYPE(db);
spa_t *spa = db->db_objset->os_spa;
enum zio_compress compress_type =
arc_get_compression(db->db_buf);
uint8_t complevel = arc_get_complevel(db->db_buf);
if (arc_is_encrypted(db->db_buf)) {
boolean_t byteorder;
uint8_t salt[ZIO_DATA_SALT_LEN];
uint8_t iv[ZIO_DATA_IV_LEN];
uint8_t mac[ZIO_DATA_MAC_LEN];
arc_get_raw_params(db->db_buf, &byteorder, salt,
iv, mac);
dr->dt.dl.dr_data = arc_alloc_raw_buf(spa, db,
dmu_objset_id(dn->dn_objset), byteorder, salt, iv,
mac, dn->dn_type, size, arc_buf_lsize(db->db_buf),
compress_type, complevel);
} else if (compress_type != ZIO_COMPRESS_OFF) {
ASSERT3U(type, ==, ARC_BUFC_DATA);
dr->dt.dl.dr_data = arc_alloc_compressed_buf(spa, db,
size, arc_buf_lsize(db->db_buf), compress_type,
complevel);
} else {
dr->dt.dl.dr_data = arc_alloc_buf(spa, db, type, size);
}
bcopy(db->db.db_data, dr->dt.dl.dr_data->b_data, size);
} else {
db->db_buf = NULL;
dbuf_clear_data(db);
}
}
2008-11-20 23:01:55 +03:00
int
dbuf_read(dmu_buf_impl_t *db, zio_t *zio, uint32_t flags)
{
int err = 0;
boolean_t prefetch;
dnode_t *dn;
2008-11-20 23:01:55 +03:00
/*
* We don't have to hold the mutex to check db_state because it
* can't be freed while we have a hold on the buffer.
*/
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
if (db->db_state == DB_NOFILL)
return (SET_ERROR(EIO));
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
2008-11-20 23:01:55 +03:00
prefetch = db->db_level == 0 && db->db_blkid != DMU_BONUS_BLKID &&
(flags & DB_RF_NOPREFETCH) == 0 && dn != NULL &&
DBUF_IS_CACHEABLE(db);
2008-11-20 23:01:55 +03:00
mutex_enter(&db->db_mtx);
if (db->db_state == DB_CACHED) {
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
spa_t *spa = dn->dn_objset->os_spa;
/*
* Ensure that this block's dnode has been decrypted if
* the caller has requested decrypted data.
*/
err = dbuf_read_verify_dnode_crypt(db, flags);
/*
* If the arc buf is compressed or encrypted and the caller
* requested uncompressed data, we need to untransform it
* before returning. We also call arc_untransform() on any
* unauthenticated blocks, which will verify their MAC if
* the key is now available.
*/
if (err == 0 && db->db_buf != NULL &&
(flags & DB_RF_NO_DECRYPT) == 0 &&
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(arc_is_encrypted(db->db_buf) ||
arc_is_unauthenticated(db->db_buf) ||
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
arc_get_compression(db->db_buf) != ZIO_COMPRESS_OFF)) {
zbookmark_phys_t zb;
SET_BOOKMARK(&zb, dmu_objset_id(db->db_objset),
db->db.db_object, db->db_level, db->db_blkid);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dbuf_fix_old_data(db, spa_syncing_txg(spa));
err = arc_untransform(db->db_buf, spa, &zb, B_FALSE);
dbuf_set_data(db, db->db_buf);
}
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
if (err == 0 && prefetch) {
dmu_zfetch(&dn->dn_zfetch, db->db_blkid, 1, B_TRUE,
Split dmu_zfetch() speculation and execution parts To make better predictions on parallel workloads dmu_zfetch() should be called as early as possible to reduce possible request reordering. In particular, it should be called before dmu_buf_hold_array_by_dnode() calls dbuf_hold(), which may sleep waiting for indirect blocks, waking up multiple threads same time on completion, that can significantly reorder the requests, making the stream look like random. But we should not issue prefetch requests before the on-demand ones, since they may get to the disks first despite the I/O scheduler, increasing on-demand request latency. This patch splits dmu_zfetch() into two functions: dmu_zfetch_prepare() and dmu_zfetch_run(). The first can be executed as early as needed. It only updates statistics and makes predictions without issuing any I/Os. The I/O issuance is handled by dmu_zfetch_run(), which can be called later when all on-demand I/Os are already issued. It even tracks the activity of other concurrent threads, issuing the prefetch only when _all_ on-demand requests are issued. For many years it was a big problem for storage servers, handling deeper request queues from their clients, having to either serialize consequential reads to make ZFS prefetcher usable, or execute the incoming requests as-is and get almost no prefetch from ZFS, relying only on deep enough prefetch by the clients. Benefits of those ways varied, but neither was perfect. With this patch deeper queue sequential read benchmarks with CrystalDiskMark from Windows via iSCSI to FreeBSD target show me much better throughput with almost 100% prefetcher hit rate, comparing to almost zero before. While there, I also removed per-stream zs_lock as useless, completely covered by parent zf_lock. Also I reused zs_blocks refcount to track zf_stream linkage of the stream, since I believe previous zs_fetch == NULL check in dmu_zfetch_stream_done() was racy. Delete prefetch streams when they reach ends of files. It saves up to 1KB of RAM per file, plus reduces searches through the stream list. Block data prefetch (speculation and indirect block prefetch is still done since they are cheaper) if all dbufs of the stream are already in DMU cache. First cache miss immediately fires all the prefetch that would be done for the stream by that time. It saves some CPU time if same files within DMU cache capacity are read over and over. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #11652
2021-03-20 08:56:11 +03:00
B_FALSE, flags & DB_RF_HAVESTRUCT);
}
DB_DNODE_EXIT(db);
DBUF_STAT_BUMP(hash_hits);
2008-11-20 23:01:55 +03:00
} else if (db->db_state == DB_UNCACHED) {
spa_t *spa = dn->dn_objset->os_spa;
boolean_t need_wait = B_FALSE;
db_lock_type_t dblt = dmu_buf_lock_parent(db, RW_READER, FTAG);
if (zio == NULL &&
db->db_blkptr != NULL && !BP_IS_HOLE(db->db_blkptr)) {
zio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL);
need_wait = B_TRUE;
}
err = dbuf_read_impl(db, zio, flags, dblt, FTAG);
/*
* dbuf_read_impl has dropped db_mtx and our parent's rwlock
* for us
*/
if (!err && prefetch) {
dmu_zfetch(&dn->dn_zfetch, db->db_blkid, 1, B_TRUE,
Split dmu_zfetch() speculation and execution parts To make better predictions on parallel workloads dmu_zfetch() should be called as early as possible to reduce possible request reordering. In particular, it should be called before dmu_buf_hold_array_by_dnode() calls dbuf_hold(), which may sleep waiting for indirect blocks, waking up multiple threads same time on completion, that can significantly reorder the requests, making the stream look like random. But we should not issue prefetch requests before the on-demand ones, since they may get to the disks first despite the I/O scheduler, increasing on-demand request latency. This patch splits dmu_zfetch() into two functions: dmu_zfetch_prepare() and dmu_zfetch_run(). The first can be executed as early as needed. It only updates statistics and makes predictions without issuing any I/Os. The I/O issuance is handled by dmu_zfetch_run(), which can be called later when all on-demand I/Os are already issued. It even tracks the activity of other concurrent threads, issuing the prefetch only when _all_ on-demand requests are issued. For many years it was a big problem for storage servers, handling deeper request queues from their clients, having to either serialize consequential reads to make ZFS prefetcher usable, or execute the incoming requests as-is and get almost no prefetch from ZFS, relying only on deep enough prefetch by the clients. Benefits of those ways varied, but neither was perfect. With this patch deeper queue sequential read benchmarks with CrystalDiskMark from Windows via iSCSI to FreeBSD target show me much better throughput with almost 100% prefetcher hit rate, comparing to almost zero before. While there, I also removed per-stream zs_lock as useless, completely covered by parent zf_lock. Also I reused zs_blocks refcount to track zf_stream linkage of the stream, since I believe previous zs_fetch == NULL check in dmu_zfetch_stream_done() was racy. Delete prefetch streams when they reach ends of files. It saves up to 1KB of RAM per file, plus reduces searches through the stream list. Block data prefetch (speculation and indirect block prefetch is still done since they are cheaper) if all dbufs of the stream are already in DMU cache. First cache miss immediately fires all the prefetch that would be done for the stream by that time. It saves some CPU time if same files within DMU cache capacity are read over and over. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #11652
2021-03-20 08:56:11 +03:00
db->db_state != DB_CACHED,
flags & DB_RF_HAVESTRUCT);
}
2008-11-20 23:01:55 +03:00
DB_DNODE_EXIT(db);
DBUF_STAT_BUMP(hash_misses);
2008-11-20 23:01:55 +03:00
/*
* If we created a zio_root we must execute it to avoid
* leaking it, even if it isn't attached to any work due
* to an error in dbuf_read_impl().
*/
if (need_wait) {
if (err == 0)
err = zio_wait(zio);
else
VERIFY0(zio_wait(zio));
}
2008-11-20 23:01:55 +03:00
} else {
/*
* Another reader came in while the dbuf was in flight
* between UNCACHED and CACHED. Either a writer will finish
* writing the buffer (sending the dbuf to CACHED) or the
* first reader's request will reach the read_done callback
* and send the dbuf to CACHED. Otherwise, a failure
* occurred and the dbuf went to UNCACHED.
*/
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
if (prefetch) {
dmu_zfetch(&dn->dn_zfetch, db->db_blkid, 1, B_TRUE,
Split dmu_zfetch() speculation and execution parts To make better predictions on parallel workloads dmu_zfetch() should be called as early as possible to reduce possible request reordering. In particular, it should be called before dmu_buf_hold_array_by_dnode() calls dbuf_hold(), which may sleep waiting for indirect blocks, waking up multiple threads same time on completion, that can significantly reorder the requests, making the stream look like random. But we should not issue prefetch requests before the on-demand ones, since they may get to the disks first despite the I/O scheduler, increasing on-demand request latency. This patch splits dmu_zfetch() into two functions: dmu_zfetch_prepare() and dmu_zfetch_run(). The first can be executed as early as needed. It only updates statistics and makes predictions without issuing any I/Os. The I/O issuance is handled by dmu_zfetch_run(), which can be called later when all on-demand I/Os are already issued. It even tracks the activity of other concurrent threads, issuing the prefetch only when _all_ on-demand requests are issued. For many years it was a big problem for storage servers, handling deeper request queues from their clients, having to either serialize consequential reads to make ZFS prefetcher usable, or execute the incoming requests as-is and get almost no prefetch from ZFS, relying only on deep enough prefetch by the clients. Benefits of those ways varied, but neither was perfect. With this patch deeper queue sequential read benchmarks with CrystalDiskMark from Windows via iSCSI to FreeBSD target show me much better throughput with almost 100% prefetcher hit rate, comparing to almost zero before. While there, I also removed per-stream zs_lock as useless, completely covered by parent zf_lock. Also I reused zs_blocks refcount to track zf_stream linkage of the stream, since I believe previous zs_fetch == NULL check in dmu_zfetch_stream_done() was racy. Delete prefetch streams when they reach ends of files. It saves up to 1KB of RAM per file, plus reduces searches through the stream list. Block data prefetch (speculation and indirect block prefetch is still done since they are cheaper) if all dbufs of the stream are already in DMU cache. First cache miss immediately fires all the prefetch that would be done for the stream by that time. It saves some CPU time if same files within DMU cache capacity are read over and over. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #11652
2021-03-20 08:56:11 +03:00
B_TRUE, flags & DB_RF_HAVESTRUCT);
}
DB_DNODE_EXIT(db);
DBUF_STAT_BUMP(hash_misses);
2008-11-20 23:01:55 +03:00
/* Skip the wait per the caller's request. */
2008-11-20 23:01:55 +03:00
if ((flags & DB_RF_NEVERWAIT) == 0) {
mutex_enter(&db->db_mtx);
2008-11-20 23:01:55 +03:00
while (db->db_state == DB_READ ||
db->db_state == DB_FILL) {
ASSERT(db->db_state == DB_READ ||
(flags & DB_RF_HAVESTRUCT) == 0);
DTRACE_PROBE2(blocked__read, dmu_buf_impl_t *,
db, zio_t *, zio);
2008-11-20 23:01:55 +03:00
cv_wait(&db->db_changed, &db->db_mtx);
}
if (db->db_state == DB_UNCACHED)
err = SET_ERROR(EIO);
mutex_exit(&db->db_mtx);
2008-11-20 23:01:55 +03:00
}
}
return (err);
}
static void
dbuf_noread(dmu_buf_impl_t *db)
{
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
mutex_enter(&db->db_mtx);
while (db->db_state == DB_READ || db->db_state == DB_FILL)
cv_wait(&db->db_changed, &db->db_mtx);
if (db->db_state == DB_UNCACHED) {
ASSERT(db->db_buf == NULL);
ASSERT(db->db.db_data == NULL);
dbuf_set_data(db, dbuf_alloc_arcbuf(db));
2008-11-20 23:01:55 +03:00
db->db_state = DB_FILL;
DTRACE_SET_STATE(db, "assigning filled buffer");
} else if (db->db_state == DB_NOFILL) {
dbuf_clear_data(db);
2008-11-20 23:01:55 +03:00
} else {
ASSERT3U(db->db_state, ==, DB_CACHED);
}
mutex_exit(&db->db_mtx);
}
void
dbuf_unoverride(dbuf_dirty_record_t *dr)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
blkptr_t *bp = &dr->dt.dl.dr_overridden_by;
2008-11-20 23:01:55 +03:00
uint64_t txg = dr->dr_txg;
ASSERT(MUTEX_HELD(&db->db_mtx));
/*
* This assert is valid because dmu_sync() expects to be called by
* a zilog's get_data while holding a range lock. This call only
* comes from dbuf_dirty() callers who must also hold a range lock.
*/
2008-11-20 23:01:55 +03:00
ASSERT(dr->dt.dl.dr_override_state != DR_IN_DMU_SYNC);
ASSERT(db->db_level == 0);
if (db->db_blkid == DMU_BONUS_BLKID ||
2008-11-20 23:01:55 +03:00
dr->dt.dl.dr_override_state == DR_NOT_OVERRIDDEN)
return;
ASSERT(db->db_data_pending != dr);
2008-11-20 23:01:55 +03:00
/* free this block */
if (!BP_IS_HOLE(bp) && !dr->dt.dl.dr_nopwrite)
zio_free(db->db_objset->os_spa, txg, bp);
2008-11-20 23:01:55 +03:00
dr->dt.dl.dr_override_state = DR_NOT_OVERRIDDEN;
dr->dt.dl.dr_nopwrite = B_FALSE;
dr->dt.dl.dr_has_raw_params = B_FALSE;
2008-11-20 23:01:55 +03:00
/*
* Release the already-written buffer, so we leave it in
* a consistent dirty state. Note that all callers are
* modifying the buffer, so they will immediately do
* another (redundant) arc_release(). Therefore, leave
* the buf thawed to save the effort of freezing &
* immediately re-thawing it.
*/
arc_release(dr->dt.dl.dr_data, db);
}
/*
* Evict (if its unreferenced) or clear (if its referenced) any level-0
* data blocks in the free range, so that any future readers will find
* empty blocks.
*/
2008-11-20 23:01:55 +03:00
void
dbuf_free_range(dnode_t *dn, uint64_t start_blkid, uint64_t end_blkid,
dmu_tx_t *tx)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db_search;
dmu_buf_impl_t *db, *db_next;
2008-11-20 23:01:55 +03:00
uint64_t txg = tx->tx_txg;
avl_index_t where;
dbuf_dirty_record_t *dr;
if (end_blkid > dn->dn_maxblkid &&
!(start_blkid == DMU_SPILL_BLKID || end_blkid == DMU_SPILL_BLKID))
end_blkid = dn->dn_maxblkid;
dprintf_dnode(dn, "start=%llu end=%llu\n", (u_longlong_t)start_blkid,
(u_longlong_t)end_blkid);
2008-11-20 23:01:55 +03:00
db_search = kmem_alloc(sizeof (dmu_buf_impl_t), KM_SLEEP);
db_search->db_level = 0;
db_search->db_blkid = start_blkid;
db_search->db_state = DB_SEARCH;
mutex_enter(&dn->dn_dbufs_mtx);
db = avl_find(&dn->dn_dbufs, db_search, &where);
ASSERT3P(db, ==, NULL);
db = avl_nearest(&dn->dn_dbufs, where, AVL_AFTER);
for (; db != NULL; db = db_next) {
db_next = AVL_NEXT(&dn->dn_dbufs, db);
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
if (db->db_level != 0 || db->db_blkid > end_blkid) {
break;
}
ASSERT3U(db->db_blkid, >=, start_blkid);
2008-11-20 23:01:55 +03:00
/* found a level 0 buffer in the range */
mutex_enter(&db->db_mtx);
if (dbuf_undirty(db, tx)) {
/* mutex has been dropped and dbuf destroyed */
2008-11-20 23:01:55 +03:00
continue;
}
2008-11-20 23:01:55 +03:00
if (db->db_state == DB_UNCACHED ||
db->db_state == DB_NOFILL ||
2008-11-20 23:01:55 +03:00
db->db_state == DB_EVICTING) {
ASSERT(db->db.db_data == NULL);
mutex_exit(&db->db_mtx);
continue;
}
if (db->db_state == DB_READ || db->db_state == DB_FILL) {
/* will be handled in dbuf_read_done or dbuf_rele */
db->db_freed_in_flight = TRUE;
mutex_exit(&db->db_mtx);
continue;
}
if (zfs_refcount_count(&db->db_holds) == 0) {
2008-11-20 23:01:55 +03:00
ASSERT(db->db_buf);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_destroy(db);
2008-11-20 23:01:55 +03:00
continue;
}
/* The dbuf is referenced */
dr = list_head(&db->db_dirty_records);
if (dr != NULL) {
2008-11-20 23:01:55 +03:00
if (dr->dr_txg == txg) {
/*
* This buffer is "in-use", re-adjust the file
* size to reflect that this buffer may
* contain new data when we sync.
*/
if (db->db_blkid != DMU_SPILL_BLKID &&
db->db_blkid > dn->dn_maxblkid)
2008-11-20 23:01:55 +03:00
dn->dn_maxblkid = db->db_blkid;
dbuf_unoverride(dr);
} else {
/*
* This dbuf is not dirty in the open context.
* Either uncache it (if its not referenced in
* the open context) or reset its contents to
* empty.
*/
dbuf_fix_old_data(db, txg);
}
}
/* clear the contents if its cached */
if (db->db_state == DB_CACHED) {
ASSERT(db->db.db_data != NULL);
arc_release(db->db_buf, db);
rw_enter(&db->db_rwlock, RW_WRITER);
2008-11-20 23:01:55 +03:00
bzero(db->db.db_data, db->db.db_size);
rw_exit(&db->db_rwlock);
2008-11-20 23:01:55 +03:00
arc_buf_freeze(db->db_buf);
}
mutex_exit(&db->db_mtx);
}
kmem_free(db_search, sizeof (dmu_buf_impl_t));
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_dbufs_mtx);
}
void
dbuf_new_size(dmu_buf_impl_t *db, int size, dmu_tx_t *tx)
{
arc_buf_t *buf, *old_buf;
dbuf_dirty_record_t *dr;
2008-11-20 23:01:55 +03:00
int osize = db->db.db_size;
arc_buf_contents_t type = DBUF_GET_BUFC_TYPE(db);
dnode_t *dn;
2008-11-20 23:01:55 +03:00
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
2008-11-20 23:01:55 +03:00
/*
* XXX we should be doing a dbuf_read, checking the return
* value and returning that up to our callers
*/
dmu_buf_will_dirty(&db->db, tx);
2008-11-20 23:01:55 +03:00
/* create the data buffer for the new block */
buf = arc_alloc_buf(dn->dn_objset->os_spa, db, type, size);
2008-11-20 23:01:55 +03:00
/* copy old block data to the new block */
old_buf = db->db_buf;
bcopy(old_buf->b_data, buf->b_data, MIN(osize, size));
2008-11-20 23:01:55 +03:00
/* zero the remainder */
if (size > osize)
bzero((uint8_t *)buf->b_data + osize, size - osize);
mutex_enter(&db->db_mtx);
dbuf_set_data(db, buf);
arc_buf_destroy(old_buf, db);
2008-11-20 23:01:55 +03:00
db->db.db_size = size;
dr = list_head(&db->db_dirty_records);
/* dirty record added by dmu_buf_will_dirty() */
VERIFY(dr != NULL);
if (db->db_level == 0)
dr->dt.dl.dr_data = buf;
ASSERT3U(dr->dr_txg, ==, tx->tx_txg);
ASSERT3U(dr->dr_accounted, ==, osize);
dr->dr_accounted = size;
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space Reviewed by: Steve Gonczi <steve.gonczi@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Background information: This assertion about tx_space_* verifies that we are not dirtying more stuff than we thought we would. We “need” to know how much we will dirty so that we can check if we should fail this transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() — typically less than a millisecond), we call dbuf_dirty() on the exact blocks that will be modified. Once this happens, the temporary accounting in tx_space_* is unnecessary, because we know exactly what blocks are newly dirtied; we call dnode_willuse_space() to track this more exact accounting. The fundamental problem causing this bug is that dmu_tx_hold_*() relies on the current state in the DMU (e.g. dn_nlevels) to predict how much will be dirtied by this transaction, but this state can change before we actually perform the transaction (i.e. call dbuf_dirty()). This bug will be fixed by removing the assertion that the tx_space_* accounting is perfectly accurate (i.e. we never dirty more than was predicted by dmu_tx_hold_*()). By removing the requirement that this accounting be perfectly accurate, we can also vastly simplify it, e.g. removing most of the logic in dmu_tx_count_*(). The new tx space accounting will be very approximate, and may be more or less than what is actually dirtied. It will still be used to determine if this transaction will put us over quota. Transactions that are marked by dmu_tx_mark_netfree() will be excepted from this check. We won’t make an attempt to determine how much space will be freed by the transaction — this was rarely accurate enough to determine if a transaction should be permitted when we are over quota, which is why dmu_tx_mark_netfree() was introduced in 2014. We also won’t attempt to give “credit” when overwriting existing blocks, if those blocks may be freed. This allows us to remove the do_free_accounting logic in dbuf_dirty(), and associated routines. This logic attempted to predict what will be on disk when this txg syncs, to know if the overwritten block will be freed (i.e. exists, and has no snapshots). OpenZFS-issue: https://www.illumos.org/issues/7793 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a Upstream bugs: DLPX-32883a Closes #5804 Porting notes: - DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(), Using the default dnode size would be slightly better. - DEBUG_DMU_TX wrappers and configure option removed. - Resolved _by_dnode() conflicts these changes have not yet been applied to OpenZFS.
2017-03-07 20:51:59 +03:00
dmu_objset_willuse_space(dn->dn_objset, size - osize, tx);
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
}
void
dbuf_release_bp(dmu_buf_impl_t *db)
{
objset_t *os __maybe_unused = db->db_objset;
ASSERT(dsl_pool_sync_context(dmu_objset_pool(os)));
ASSERT(arc_released(os->os_phys_buf) ||
list_link_active(&os->os_dsl_dataset->ds_synced_link));
ASSERT(db->db_parent == NULL || arc_released(db->db_parent->db_buf));
(void) arc_release(db->db_buf, db);
}
/*
* We already have a dirty record for this TXG, and we are being
* dirtied again.
*/
static void
dbuf_redirty(dbuf_dirty_record_t *dr)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
ASSERT(MUTEX_HELD(&db->db_mtx));
if (db->db_level == 0 && db->db_blkid != DMU_BONUS_BLKID) {
/*
* If this buffer has already been written out,
* we now need to reset its state.
*/
dbuf_unoverride(dr);
if (db->db.db_object != DMU_META_DNODE_OBJECT &&
db->db_state != DB_NOFILL) {
/* Already released on initial dirty, so just thaw. */
ASSERT(arc_released(db->db_buf));
arc_buf_thaw(db->db_buf);
}
}
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dbuf_dirty_record_t *
dbuf_dirty_lightweight(dnode_t *dn, uint64_t blkid, dmu_tx_t *tx)
{
rw_enter(&dn->dn_struct_rwlock, RW_READER);
IMPLY(dn->dn_objset->os_raw_receive, dn->dn_maxblkid >= blkid);
dnode_new_blkid(dn, blkid, tx, B_TRUE, B_FALSE);
ASSERT(dn->dn_maxblkid >= blkid);
dbuf_dirty_record_t *dr = kmem_zalloc(sizeof (*dr), KM_SLEEP);
list_link_init(&dr->dr_dirty_node);
list_link_init(&dr->dr_dbuf_node);
dr->dr_dnode = dn;
dr->dr_txg = tx->tx_txg;
dr->dt.dll.dr_blkid = blkid;
dr->dr_accounted = dn->dn_datablksz;
/*
* There should not be any dbuf for the block that we're dirtying.
* Otherwise the buffer contents could be inconsistent between the
* dbuf and the lightweight dirty record.
*/
ASSERT3P(NULL, ==, dbuf_find(dn->dn_objset, dn->dn_object, 0, blkid));
mutex_enter(&dn->dn_mtx);
int txgoff = tx->tx_txg & TXG_MASK;
if (dn->dn_free_ranges[txgoff] != NULL) {
range_tree_clear(dn->dn_free_ranges[txgoff], blkid, 1);
}
if (dn->dn_nlevels == 1) {
ASSERT3U(blkid, <, dn->dn_nblkptr);
list_insert_tail(&dn->dn_dirty_records[txgoff], dr);
mutex_exit(&dn->dn_mtx);
rw_exit(&dn->dn_struct_rwlock);
dnode_setdirty(dn, tx);
} else {
mutex_exit(&dn->dn_mtx);
int epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
dmu_buf_impl_t *parent_db = dbuf_hold_level(dn,
1, blkid >> epbs, FTAG);
rw_exit(&dn->dn_struct_rwlock);
if (parent_db == NULL) {
kmem_free(dr, sizeof (*dr));
return (NULL);
}
int err = dbuf_read(parent_db, NULL,
(DB_RF_NOPREFETCH | DB_RF_CANFAIL));
if (err != 0) {
dbuf_rele(parent_db, FTAG);
kmem_free(dr, sizeof (*dr));
return (NULL);
}
dbuf_dirty_record_t *parent_dr = dbuf_dirty(parent_db, tx);
dbuf_rele(parent_db, FTAG);
mutex_enter(&parent_dr->dt.di.dr_mtx);
ASSERT3U(parent_dr->dr_txg, ==, tx->tx_txg);
list_insert_tail(&parent_dr->dt.di.dr_children, dr);
mutex_exit(&parent_dr->dt.di.dr_mtx);
dr->dr_parent = parent_dr;
}
dmu_objset_willuse_space(dn->dn_objset, dr->dr_accounted, tx);
return (dr);
}
2008-11-20 23:01:55 +03:00
dbuf_dirty_record_t *
dbuf_dirty(dmu_buf_impl_t *db, dmu_tx_t *tx)
{
dnode_t *dn;
objset_t *os;
dbuf_dirty_record_t *dr, *dr_next, *dr_head;
2008-11-20 23:01:55 +03:00
int txgoff = tx->tx_txg & TXG_MASK;
boolean_t drop_struct_rwlock = B_FALSE;
2008-11-20 23:01:55 +03:00
ASSERT(tx->tx_txg != 0);
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
DMU_TX_DIRTY_BUF(tx, db);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
2008-11-20 23:01:55 +03:00
/*
* Shouldn't dirty a regular buffer in syncing context. Private
* objects may be dirtied in syncing context, but only if they
* were already pre-dirtied in open context.
*/
#ifdef ZFS_DEBUG
if (dn->dn_objset->os_dsl_dataset != NULL) {
rrw_enter(&dn->dn_objset->os_dsl_dataset->ds_bp_rwlock,
RW_READER, FTAG);
}
2008-11-20 23:01:55 +03:00
ASSERT(!dmu_tx_is_syncing(tx) ||
BP_IS_HOLE(dn->dn_objset->os_rootbp) ||
2009-07-03 02:44:48 +04:00
DMU_OBJECT_IS_SPECIAL(dn->dn_object) ||
dn->dn_objset->os_dsl_dataset == NULL);
if (dn->dn_objset->os_dsl_dataset != NULL)
rrw_exit(&dn->dn_objset->os_dsl_dataset->ds_bp_rwlock, FTAG);
#endif
2008-11-20 23:01:55 +03:00
/*
* We make this assert for private objects as well, but after we
* check if we're already dirty. They are allowed to re-dirty
* in syncing context.
*/
ASSERT(dn->dn_object == DMU_META_DNODE_OBJECT ||
dn->dn_dirtyctx == DN_UNDIRTIED || dn->dn_dirtyctx ==
(dmu_tx_is_syncing(tx) ? DN_DIRTY_SYNC : DN_DIRTY_OPEN));
mutex_enter(&db->db_mtx);
/*
* XXX make this true for indirects too? The problem is that
* transactions created with dmu_tx_create_assigned() from
* syncing context don't bother holding ahead.
*/
ASSERT(db->db_level != 0 ||
db->db_state == DB_CACHED || db->db_state == DB_FILL ||
db->db_state == DB_NOFILL);
2008-11-20 23:01:55 +03:00
mutex_enter(&dn->dn_mtx);
dnode_set_dirtyctx(dn, tx, db);
if (tx->tx_txg > dn->dn_dirty_txg)
dn->dn_dirty_txg = tx->tx_txg;
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_mtx);
if (db->db_blkid == DMU_SPILL_BLKID)
dn->dn_have_spill = B_TRUE;
2008-11-20 23:01:55 +03:00
/*
* If this buffer is already dirty, we're done.
*/
dr_head = list_head(&db->db_dirty_records);
ASSERT(dr_head == NULL || dr_head->dr_txg <= tx->tx_txg ||
2008-11-20 23:01:55 +03:00
db->db.db_object == DMU_META_DNODE_OBJECT);
dr_next = dbuf_find_dirty_lte(db, tx->tx_txg);
if (dr_next && dr_next->dr_txg == tx->tx_txg) {
DB_DNODE_EXIT(db);
dbuf_redirty(dr_next);
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
return (dr_next);
2008-11-20 23:01:55 +03:00
}
/*
* Only valid if not already dirty.
*/
2009-07-03 02:44:48 +04:00
ASSERT(dn->dn_object == 0 ||
dn->dn_dirtyctx == DN_UNDIRTIED || dn->dn_dirtyctx ==
2008-11-20 23:01:55 +03:00
(dmu_tx_is_syncing(tx) ? DN_DIRTY_SYNC : DN_DIRTY_OPEN));
ASSERT3U(dn->dn_nlevels, >, db->db_level);
/*
* We should only be dirtying in syncing context if it's the
2009-07-03 02:44:48 +04:00
* mos or we're initializing the os or it's a special object.
* However, we are allowed to dirty in syncing context provided
* we already dirtied it in open context. Hence we must make
* this assertion only if we're not already dirty.
2008-11-20 23:01:55 +03:00
*/
os = dn->dn_objset;
VERIFY3U(tx->tx_txg, <=, spa_final_dirty_txg(os->os_spa));
#ifdef ZFS_DEBUG
if (dn->dn_objset->os_dsl_dataset != NULL)
rrw_enter(&os->os_dsl_dataset->ds_bp_rwlock, RW_READER, FTAG);
2009-07-03 02:44:48 +04:00
ASSERT(!dmu_tx_is_syncing(tx) || DMU_OBJECT_IS_SPECIAL(dn->dn_object) ||
os->os_dsl_dataset == NULL || BP_IS_HOLE(os->os_rootbp));
if (dn->dn_objset->os_dsl_dataset != NULL)
rrw_exit(&os->os_dsl_dataset->ds_bp_rwlock, FTAG);
#endif
2008-11-20 23:01:55 +03:00
ASSERT(db->db.db_size != 0);
dprintf_dbuf(db, "size=%llx\n", (u_longlong_t)db->db.db_size);
if (db->db_blkid != DMU_BONUS_BLKID) {
OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space Reviewed by: Steve Gonczi <steve.gonczi@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Background information: This assertion about tx_space_* verifies that we are not dirtying more stuff than we thought we would. We “need” to know how much we will dirty so that we can check if we should fail this transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() — typically less than a millisecond), we call dbuf_dirty() on the exact blocks that will be modified. Once this happens, the temporary accounting in tx_space_* is unnecessary, because we know exactly what blocks are newly dirtied; we call dnode_willuse_space() to track this more exact accounting. The fundamental problem causing this bug is that dmu_tx_hold_*() relies on the current state in the DMU (e.g. dn_nlevels) to predict how much will be dirtied by this transaction, but this state can change before we actually perform the transaction (i.e. call dbuf_dirty()). This bug will be fixed by removing the assertion that the tx_space_* accounting is perfectly accurate (i.e. we never dirty more than was predicted by dmu_tx_hold_*()). By removing the requirement that this accounting be perfectly accurate, we can also vastly simplify it, e.g. removing most of the logic in dmu_tx_count_*(). The new tx space accounting will be very approximate, and may be more or less than what is actually dirtied. It will still be used to determine if this transaction will put us over quota. Transactions that are marked by dmu_tx_mark_netfree() will be excepted from this check. We won’t make an attempt to determine how much space will be freed by the transaction — this was rarely accurate enough to determine if a transaction should be permitted when we are over quota, which is why dmu_tx_mark_netfree() was introduced in 2014. We also won’t attempt to give “credit” when overwriting existing blocks, if those blocks may be freed. This allows us to remove the do_free_accounting logic in dbuf_dirty(), and associated routines. This logic attempted to predict what will be on disk when this txg syncs, to know if the overwritten block will be freed (i.e. exists, and has no snapshots). OpenZFS-issue: https://www.illumos.org/issues/7793 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a Upstream bugs: DLPX-32883a Closes #5804 Porting notes: - DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(), Using the default dnode size would be slightly better. - DEBUG_DMU_TX wrappers and configure option removed. - Resolved _by_dnode() conflicts these changes have not yet been applied to OpenZFS.
2017-03-07 20:51:59 +03:00
dmu_objset_willuse_space(os, db->db.db_size, tx);
2008-11-20 23:01:55 +03:00
}
/*
* If this buffer is dirty in an old transaction group we need
* to make a copy of it so that the changes we make in this
* transaction group won't leak out when we sync the older txg.
*/
dr = kmem_zalloc(sizeof (dbuf_dirty_record_t), KM_SLEEP);
list_link_init(&dr->dr_dirty_node);
list_link_init(&dr->dr_dbuf_node);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dr->dr_dnode = dn;
2008-11-20 23:01:55 +03:00
if (db->db_level == 0) {
void *data_old = db->db_buf;
if (db->db_state != DB_NOFILL) {
if (db->db_blkid == DMU_BONUS_BLKID) {
dbuf_fix_old_data(db, tx->tx_txg);
data_old = db->db.db_data;
} else if (db->db.db_object != DMU_META_DNODE_OBJECT) {
/*
* Release the data buffer from the cache so
* that we can modify it without impacting
* possible other users of this cached data
* block. Note that indirect blocks and
* private objects are not released until the
* syncing state (since they are only modified
* then).
*/
arc_release(db->db_buf, db);
dbuf_fix_old_data(db, tx->tx_txg);
data_old = db->db_buf;
}
ASSERT(data_old != NULL);
2008-11-20 23:01:55 +03:00
}
dr->dt.dl.dr_data = data_old;
} else {
Identify locks flagged by lockdep When running a kernel with CONFIG_LOCKDEP=y, lockdep reports possible recursive locking in some cases and possible circular locking dependency in others, within the SPL and ZFS modules. This patch uses a mutex type defined in SPL, MUTEX_NOLOCKDEP, to mark such mutexes when they are initialized. This mutex type causes attempts to take or release those locks to be wrapped in lockdep_off() and lockdep_on() calls to silence the dependency checker and allow the use of lock_stats to examine contention. For RW locks, it uses an analogous lock type, RW_NOLOCKDEP. The goal is that these locks are ultimately changed back to type MUTEX_DEFAULT or RW_DEFAULT, after the locks are annotated to reflect their relationship (e.g. z_name_lock below) or any real problem with the lock dependencies are fixed. Some of the affected locks are: tc_open_lock: ============= This is an array of locks, all with same name, which txg_quiesce must take all of in order to move txg to next state. All default to the same lockdep class, and so to lockdep appears recursive. zp->z_name_lock: ================ In zfs_rmdir, dzp = znode for the directory (input to zfs_dirent_lock) zp = znode for the entry being removed (output of zfs_dirent_lock) zfs_rmdir()->zfs_dirent_lock() takes z_name_lock in dzp zfs_rmdir() takes z_name_lock in zp Since both dzp and zp are type znode_t, the locks have the same default class, and lockdep considers it a possible recursive lock attempt. l->l_rwlock: ============ zap_expand_leaf() sometimes creates two new zap leaf structures, via these call paths: zap_deref_leaf()->zap_get_leaf_byblk()->zap_leaf_open() zap_expand_leaf()->zap_create_leaf()->zap_expand_leaf()->zap_create_leaf() Because both zap_leaf_open() and zap_create_leaf() initialize l->l_rwlock in their (separate) leaf structures, the lockdep class is the same, and the linux kernel believes these might both be the same lock, and emits a possible recursive lock warning. Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3895
2015-10-15 23:08:27 +03:00
mutex_init(&dr->dt.di.dr_mtx, NULL, MUTEX_NOLOCKDEP, NULL);
2008-11-20 23:01:55 +03:00
list_create(&dr->dt.di.dr_children,
sizeof (dbuf_dirty_record_t),
offsetof(dbuf_dirty_record_t, dr_dirty_node));
}
dmu_tx_wait() hang likely due to cv_signal() in dsl_pool_dirty_delta() Even though the bug's writeup (Github issue #9136) is very detailed, we still don't know exactly how we got to that state, thus I wasn't able to reproduce the bug. That said, we can make an educated guess combining the information on filled issue with the code. From the fact that `dp_dirty_total` was 0 (which is less than `zfs_dirty_data_max`) we know that there was one thread that set it to 0 and then signaled one of the waiters of `dp_spaceavail_cv` [see `dsl_pool_dirty_delta()` which is also the only place that `dp_dirty_total` is changed]. Thus, the only logical explaination then for the bug being hit is that the waiter that just got awaken didn't go through `dsl_pool_dirty_data()`. Given that this function is only called by `dsl_pool_dirty_space()` or `dsl_pool_undirty_space()` I can only think of two possible ways of the above scenario happening: [1] The waiter didn't call into any of the two functions - which I find highly unlikely (i.e. why wait on `dp_spaceavail_cv` to begin with?). [2] The waiter did call in one of the above function but it passed 0 as the space/delta to be dirtied (or undirtied) and then the callee returned immediately (e.g both `dsl_pool_dirty_space()` and `dsl_pool_undirty_space()` return immediately when space is 0). In any case and no matter how we got there, the easy fix would be to just broadcast to all waiters whenever `dp_dirty_total` hits 0. That said and given that we've never hit this before, it would make sense to think more on why the above situation occured. Attempting to mimic what Prakash was doing in the issue filed, I created a dataset with `sync=always` and started doing contiguous writes in a file within that dataset. I observed with DTrace that even though we update the pool's dirty data accounting when we would dirty stuff, the accounting wouldn't be decremented incrementally as we were done with the ZIOs of those writes (the reason being that `dbuf_write_physdone()` isn't be called as we go through the override code paths, and thus `dsl_pool_undirty_space()` is never called). As a result we'd have to wait until we get to `dsl_pool_sync()` where we zero out all dirty data accounting for the pool and the current TXG's metadata. In addition, as Matt noted and I later verified, the same issue would arise when using dedup. In both cases (sync & dedup) we shouldn't have to wait until `dsl_pool_sync()` zeros out the accounting data. According to the comment in that part of the code, the reasons why we do the zeroing, have nothing to do with what we observe: ```` /* * We have written all of the accounted dirty data, so our * dp_space_towrite should now be zero. However, some seldom-used * code paths do not adhere to this (e.g. dbuf_undirty(), also * rounding error in dbuf_write_physdone). * Shore up the accounting of any dirtied space now. */ dsl_pool_undirty_space(dp, dp->dp_dirty_pertxg[txg & TXG_MASK], txg); ```` Ideally what we want to do is to undirty in the accounting exactly what we dirty (I use the word ideally as we can still have rounding errors). This would make the behavior of the system more clear and predictable. Another interesting issue that I observed with DTrace was that we wouldn't update any of the pool's dirty data accounting whenever we would dirty and/or undirty MOS data. In addition, every time we would change the size of a dbuf through `dbuf_new_size()` we wouldn't update the accounted space dirtied in the appropriate dirty record, so when ZIOs are done we would undirty less that we dirtied from the pool's accounting point of view. For the first two issues observed (sync & dedup) this patch ensures that we still update the pool's accounting when we undirty data, regardless of the write being physical or not. For changes in the MOS, we first ensure to zero out the pool's dirty data accounting in `dsl_pool_sync()` after we synced the MOS. Then we can go ahead and enable the update of the pool's dirty data accounting wheneve we change MOS data. Another fix is that we now update the accounting explicitly for counting errors in `dbuf_write_done()`. Finally, `dbuf_new_size()` updates the accounted space of the appropriate dirty record correctly now. The problem is that we still don't know how the bug came up in the issue filled. That said the issues fixed seem to be very relevant, so instead of going with the broadcasting solution right away, I decided to leave this patch as is. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> External-issue: DLPX-47285 Closes #9137
2019-08-16 02:53:53 +03:00
if (db->db_blkid != DMU_BONUS_BLKID)
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
dr->dr_accounted = db->db.db_size;
2008-11-20 23:01:55 +03:00
dr->dr_dbuf = db;
dr->dr_txg = tx->tx_txg;
list_insert_before(&db->db_dirty_records, dr_next, dr);
2008-11-20 23:01:55 +03:00
/*
* We could have been freed_in_flight between the dbuf_noread
* and dbuf_dirty. We win, as though the dbuf_noread() had
* happened after the free.
*/
if (db->db_level == 0 && db->db_blkid != DMU_BONUS_BLKID &&
db->db_blkid != DMU_SPILL_BLKID) {
2008-11-20 23:01:55 +03:00
mutex_enter(&dn->dn_mtx);
if (dn->dn_free_ranges[txgoff] != NULL) {
range_tree_clear(dn->dn_free_ranges[txgoff],
db->db_blkid, 1);
}
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_mtx);
db->db_freed_in_flight = FALSE;
}
/*
* This buffer is now part of this txg
*/
dbuf_add_ref(db, (void *)(uintptr_t)tx->tx_txg);
db->db_dirtycnt += 1;
ASSERT3U(db->db_dirtycnt, <=, 3);
mutex_exit(&db->db_mtx);
if (db->db_blkid == DMU_BONUS_BLKID ||
db->db_blkid == DMU_SPILL_BLKID) {
2008-11-20 23:01:55 +03:00
mutex_enter(&dn->dn_mtx);
ASSERT(!list_link_active(&dr->dr_dirty_node));
list_insert_tail(&dn->dn_dirty_records[txgoff], dr);
mutex_exit(&dn->dn_mtx);
dnode_setdirty(dn, tx);
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
return (dr);
}
if (!RW_WRITE_HELD(&dn->dn_struct_rwlock)) {
rw_enter(&dn->dn_struct_rwlock, RW_READER);
drop_struct_rwlock = B_TRUE;
}
/*
* If we are overwriting a dedup BP, then unless it is snapshotted,
* when we get to syncing context we will need to decrement its
* refcount in the DDT. Prefetch the relevant DDT block so that
* syncing context won't have to wait for the i/o.
*/
if (db->db_blkptr != NULL) {
db_lock_type_t dblt = dmu_buf_lock_parent(db, RW_READER, FTAG);
ddt_prefetch(os->os_spa, db->db_blkptr);
dmu_buf_unlock_parent(db, dblt, FTAG);
}
/*
* We need to hold the dn_struct_rwlock to make this assertion,
* because it protects dn_phys / dn_next_nlevels from changing.
*/
ASSERT((dn->dn_phys->dn_nlevels == 0 && db->db_level == 0) ||
dn->dn_phys->dn_nlevels > db->db_level ||
dn->dn_next_nlevels[txgoff] > db->db_level ||
dn->dn_next_nlevels[(tx->tx_txg-1) & TXG_MASK] > db->db_level ||
dn->dn_next_nlevels[(tx->tx_txg-2) & TXG_MASK] > db->db_level);
2008-11-20 23:01:55 +03:00
if (db->db_level == 0) {
ASSERT(!db->db_objset->os_raw_receive ||
dn->dn_maxblkid >= db->db_blkid);
dnode_new_blkid(dn, db->db_blkid, tx,
drop_struct_rwlock, B_FALSE);
ASSERT(dn->dn_maxblkid >= db->db_blkid);
}
2008-11-20 23:01:55 +03:00
if (db->db_level+1 < dn->dn_nlevels) {
dmu_buf_impl_t *parent = db->db_parent;
dbuf_dirty_record_t *di;
int parent_held = FALSE;
if (db->db_parent == NULL || db->db_parent == dn->dn_dbuf) {
int epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
parent = dbuf_hold_level(dn, db->db_level + 1,
2008-11-20 23:01:55 +03:00
db->db_blkid >> epbs, FTAG);
ASSERT(parent != NULL);
2008-11-20 23:01:55 +03:00
parent_held = TRUE;
}
if (drop_struct_rwlock)
2008-11-20 23:01:55 +03:00
rw_exit(&dn->dn_struct_rwlock);
ASSERT3U(db->db_level + 1, ==, parent->db_level);
2008-11-20 23:01:55 +03:00
di = dbuf_dirty(parent, tx);
if (parent_held)
dbuf_rele(parent, FTAG);
mutex_enter(&db->db_mtx);
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
/*
* Since we've dropped the mutex, it's possible that
* dbuf_undirty() might have changed this out from under us.
*/
if (list_head(&db->db_dirty_records) == dr ||
2008-11-20 23:01:55 +03:00
dn->dn_object == DMU_META_DNODE_OBJECT) {
mutex_enter(&di->dt.di.dr_mtx);
ASSERT3U(di->dr_txg, ==, tx->tx_txg);
ASSERT(!list_link_active(&dr->dr_dirty_node));
list_insert_tail(&di->dt.di.dr_children, dr);
mutex_exit(&di->dt.di.dr_mtx);
dr->dr_parent = di;
}
mutex_exit(&db->db_mtx);
} else {
ASSERT(db->db_level + 1 == dn->dn_nlevels);
2008-11-20 23:01:55 +03:00
ASSERT(db->db_blkid < dn->dn_nblkptr);
ASSERT(db->db_parent == NULL || db->db_parent == dn->dn_dbuf);
2008-11-20 23:01:55 +03:00
mutex_enter(&dn->dn_mtx);
ASSERT(!list_link_active(&dr->dr_dirty_node));
list_insert_tail(&dn->dn_dirty_records[txgoff], dr);
mutex_exit(&dn->dn_mtx);
if (drop_struct_rwlock)
2008-11-20 23:01:55 +03:00
rw_exit(&dn->dn_struct_rwlock);
}
dnode_setdirty(dn, tx);
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
return (dr);
}
static void
dbuf_undirty_bonus(dbuf_dirty_record_t *dr)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
if (dr->dt.dl.dr_data != db->db.db_data) {
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
struct dnode *dn = dr->dr_dnode;
int max_bonuslen = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots);
kmem_free(dr->dt.dl.dr_data, max_bonuslen);
arc_space_return(max_bonuslen, ARC_SPACE_BONUS);
}
db->db_data_pending = NULL;
ASSERT(list_next(&db->db_dirty_records, dr) == NULL);
list_remove(&db->db_dirty_records, dr);
if (dr->dr_dbuf->db_level != 0) {
mutex_destroy(&dr->dt.di.dr_mtx);
list_destroy(&dr->dt.di.dr_children);
}
kmem_free(dr, sizeof (dbuf_dirty_record_t));
ASSERT3U(db->db_dirtycnt, >, 0);
db->db_dirtycnt -= 1;
}
/*
* Undirty a buffer in the transaction group referenced by the given
* transaction. Return whether this evicted the dbuf.
*/
static boolean_t
2008-11-20 23:01:55 +03:00
dbuf_undirty(dmu_buf_impl_t *db, dmu_tx_t *tx)
{
uint64_t txg = tx->tx_txg;
ASSERT(txg != 0);
/*
* Due to our use of dn_nlevels below, this can only be called
* in open context, unless we are operating on the MOS.
* From syncing context, dn_nlevels may be different from the
* dn_nlevels used when dbuf was dirtied.
*/
ASSERT(db->db_objset ==
dmu_objset_pool(db->db_objset)->dp_meta_objset ||
txg != spa_syncing_txg(dmu_objset_spa(db->db_objset)));
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
ASSERT0(db->db_level);
ASSERT(MUTEX_HELD(&db->db_mtx));
2008-11-20 23:01:55 +03:00
/*
* If this buffer is not dirty, we're done.
*/
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dbuf_dirty_record_t *dr = dbuf_find_dirty_eq(db, txg);
if (dr == NULL)
return (B_FALSE);
ASSERT(dr->dr_dbuf == db);
2008-11-20 23:01:55 +03:00
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
2008-11-20 23:01:55 +03:00
dprintf_dbuf(db, "size=%llx\n", (u_longlong_t)db->db.db_size);
ASSERT(db->db.db_size != 0);
dsl_pool_undirty_space(dmu_objset_pool(dn->dn_objset),
dr->dr_accounted, txg);
2008-11-20 23:01:55 +03:00
list_remove(&db->db_dirty_records, dr);
2008-11-20 23:01:55 +03:00
/*
* Note that there are three places in dbuf_dirty()
* where this dirty record may be put on a list.
* Make sure to do a list_remove corresponding to
* every one of those list_insert calls.
*/
2008-11-20 23:01:55 +03:00
if (dr->dr_parent) {
mutex_enter(&dr->dr_parent->dt.di.dr_mtx);
list_remove(&dr->dr_parent->dt.di.dr_children, dr);
mutex_exit(&dr->dr_parent->dt.di.dr_mtx);
} else if (db->db_blkid == DMU_SPILL_BLKID ||
db->db_level + 1 == dn->dn_nlevels) {
ASSERT(db->db_blkptr == NULL || db->db_parent == dn->dn_dbuf);
2008-11-20 23:01:55 +03:00
mutex_enter(&dn->dn_mtx);
list_remove(&dn->dn_dirty_records[txg & TXG_MASK], dr);
mutex_exit(&dn->dn_mtx);
}
if (db->db_state != DB_NOFILL) {
dbuf_unoverride(dr);
2008-11-20 23:01:55 +03:00
ASSERT(db->db_buf != NULL);
ASSERT(dr->dt.dl.dr_data != NULL);
if (dr->dt.dl.dr_data != db->db_buf)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(dr->dt.dl.dr_data, db);
2008-11-20 23:01:55 +03:00
}
2008-11-20 23:01:55 +03:00
kmem_free(dr, sizeof (dbuf_dirty_record_t));
ASSERT(db->db_dirtycnt > 0);
db->db_dirtycnt -= 1;
if (zfs_refcount_remove(&db->db_holds, (void *)(uintptr_t)txg) == 0) {
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT(db->db_state == DB_NOFILL || arc_released(db->db_buf));
dbuf_destroy(db);
return (B_TRUE);
2008-11-20 23:01:55 +03:00
}
return (B_FALSE);
2008-11-20 23:01:55 +03:00
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
static void
dmu_buf_will_dirty_impl(dmu_buf_t *db_fake, int flags, dmu_tx_t *tx)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
2008-11-20 23:01:55 +03:00
ASSERT(tx->tx_txg != 0);
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
/*
* Quick check for dirtiness. For already dirty blocks, this
* reduces runtime of this function by >90%, and overall performance
* by 50% for some workloads (e.g. file deletion with indirect blocks
* cached).
*/
mutex_enter(&db->db_mtx);
if (db->db_state == DB_CACHED) {
dbuf_dirty_record_t *dr = dbuf_find_dirty_eq(db, tx->tx_txg);
/*
* It's possible that it is already dirty but not cached,
* because there are some calls to dbuf_dirty() that don't
* go through dmu_buf_will_dirty().
*/
if (dr != NULL) {
/* This dbuf is already dirty and cached. */
dbuf_redirty(dr);
mutex_exit(&db->db_mtx);
return;
}
}
mutex_exit(&db->db_mtx);
DB_DNODE_ENTER(db);
if (RW_WRITE_HELD(&DB_DNODE(db)->dn_struct_rwlock))
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
flags |= DB_RF_HAVESTRUCT;
DB_DNODE_EXIT(db);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) dbuf_read(db, NULL, flags);
2008-11-20 23:01:55 +03:00
(void) dbuf_dirty(db, tx);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
void
dmu_buf_will_dirty(dmu_buf_t *db_fake, dmu_tx_t *tx)
{
dmu_buf_will_dirty_impl(db_fake,
DB_RF_MUST_SUCCEED | DB_RF_NOPREFETCH, tx);
}
boolean_t
dmu_buf_is_dirty(dmu_buf_t *db_fake, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
dbuf_dirty_record_t *dr;
mutex_enter(&db->db_mtx);
dr = dbuf_find_dirty_eq(db, tx->tx_txg);
mutex_exit(&db->db_mtx);
return (dr != NULL);
}
void
dmu_buf_will_not_fill(dmu_buf_t *db_fake, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
db->db_state = DB_NOFILL;
DTRACE_SET_STATE(db, "allocating NOFILL buffer");
dmu_buf_will_fill(db_fake, tx);
}
2008-11-20 23:01:55 +03:00
void
dmu_buf_will_fill(dmu_buf_t *db_fake, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
ASSERT(tx->tx_txg != 0);
ASSERT(db->db_level == 0);
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
ASSERT(db->db.db_object != DMU_META_DNODE_OBJECT ||
dmu_tx_private_ok(tx));
dbuf_noread(db);
(void) dbuf_dirty(db, tx);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* This function is effectively the same as dmu_buf_will_dirty(), but
* indicates the caller expects raw encrypted data in the db, and provides
* the crypt params (byteorder, salt, iv, mac) which should be stored in the
* blkptr_t when this dbuf is written. This is only used for blocks of
* dnodes, during raw receive.
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
*/
void
dmu_buf_set_crypt_params(dmu_buf_t *db_fake, boolean_t byteorder,
const uint8_t *salt, const uint8_t *iv, const uint8_t *mac, dmu_tx_t *tx)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
dbuf_dirty_record_t *dr;
/*
* dr_has_raw_params is only processed for blocks of dnodes
* (see dbuf_sync_dnode_leaf_crypt()).
*/
ASSERT3U(db->db.db_object, ==, DMU_META_DNODE_OBJECT);
ASSERT3U(db->db_level, ==, 0);
ASSERT(db->db_objset->os_raw_receive);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_buf_will_dirty_impl(db_fake,
DB_RF_MUST_SUCCEED | DB_RF_NOPREFETCH | DB_RF_NO_DECRYPT, tx);
dr = dbuf_find_dirty_eq(db, tx->tx_txg);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
ASSERT3P(dr, !=, NULL);
dr->dt.dl.dr_has_raw_params = B_TRUE;
dr->dt.dl.dr_byteorder = byteorder;
bcopy(salt, dr->dt.dl.dr_salt, ZIO_DATA_SALT_LEN);
bcopy(iv, dr->dt.dl.dr_iv, ZIO_DATA_IV_LEN);
bcopy(mac, dr->dt.dl.dr_mac, ZIO_DATA_MAC_LEN);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static void
dbuf_override_impl(dmu_buf_impl_t *db, const blkptr_t *bp, dmu_tx_t *tx)
{
struct dirty_leaf *dl;
dbuf_dirty_record_t *dr;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dr = list_head(&db->db_dirty_records);
ASSERT3U(dr->dr_txg, ==, tx->tx_txg);
dl = &dr->dt.dl;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dl->dr_overridden_by = *bp;
dl->dr_override_state = DR_OVERRIDDEN;
dl->dr_overridden_by.blk_birth = dr->dr_txg;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
}
2008-11-20 23:01:55 +03:00
/* ARGSUSED */
void
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dmu_buf_fill_done(dmu_buf_t *dbuf, dmu_tx_t *tx)
2008-11-20 23:01:55 +03:00
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
dmu_buf_impl_t *db = (dmu_buf_impl_t *)dbuf;
dbuf_states_t old_state;
2008-11-20 23:01:55 +03:00
mutex_enter(&db->db_mtx);
DBUF_VERIFY(db);
old_state = db->db_state;
db->db_state = DB_CACHED;
if (old_state == DB_FILL) {
2008-11-20 23:01:55 +03:00
if (db->db_level == 0 && db->db_freed_in_flight) {
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
/* we were freed while filling */
/* XXX dbuf_undirty? */
bzero(db->db.db_data, db->db.db_size);
db->db_freed_in_flight = FALSE;
DTRACE_SET_STATE(db,
"fill done handling freed in flight");
} else {
DTRACE_SET_STATE(db, "fill done");
2008-11-20 23:01:55 +03:00
}
cv_broadcast(&db->db_changed);
}
mutex_exit(&db->db_mtx);
}
void
dmu_buf_write_embedded(dmu_buf_t *dbuf, void *data,
bp_embedded_type_t etype, enum zio_compress comp,
int uncompressed_size, int compressed_size, int byteorder,
dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)dbuf;
struct dirty_leaf *dl;
dmu_object_type_t type;
dbuf_dirty_record_t *dr;
if (etype == BP_EMBEDDED_TYPE_DATA) {
ASSERT(spa_feature_is_active(dmu_objset_spa(db->db_objset),
SPA_FEATURE_EMBEDDED_DATA));
}
DB_DNODE_ENTER(db);
type = DB_DNODE(db)->dn_type;
DB_DNODE_EXIT(db);
ASSERT0(db->db_level);
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
dmu_buf_will_not_fill(dbuf, tx);
dr = list_head(&db->db_dirty_records);
ASSERT3U(dr->dr_txg, ==, tx->tx_txg);
dl = &dr->dt.dl;
encode_embedded_bp_compressed(&dl->dr_overridden_by,
data, comp, uncompressed_size, compressed_size);
BPE_SET_ETYPE(&dl->dr_overridden_by, etype);
BP_SET_TYPE(&dl->dr_overridden_by, type);
BP_SET_LEVEL(&dl->dr_overridden_by, 0);
BP_SET_BYTEORDER(&dl->dr_overridden_by, byteorder);
dl->dr_override_state = DR_OVERRIDDEN;
dl->dr_overridden_by.blk_birth = dr->dr_txg;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
void
dmu_buf_redact(dmu_buf_t *dbuf, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)dbuf;
dmu_object_type_t type;
ASSERT(dsl_dataset_feature_is_active(db->db_objset->os_dsl_dataset,
SPA_FEATURE_REDACTED_DATASETS));
DB_DNODE_ENTER(db);
type = DB_DNODE(db)->dn_type;
DB_DNODE_EXIT(db);
ASSERT0(db->db_level);
dmu_buf_will_not_fill(dbuf, tx);
blkptr_t bp = { { { {0} } } };
BP_SET_TYPE(&bp, type);
BP_SET_LEVEL(&bp, 0);
BP_SET_BIRTH(&bp, tx->tx_txg, 0);
BP_SET_REDACTED(&bp);
BPE_SET_LSIZE(&bp, dbuf->db_size);
dbuf_override_impl(db, &bp, tx);
}
2009-07-03 02:44:48 +04:00
/*
* Directly assign a provided arc buf to a given dbuf if it's not referenced
* by anybody except our caller. Otherwise copy arcbuf's contents to dbuf.
*/
void
dbuf_assign_arcbuf(dmu_buf_impl_t *db, arc_buf_t *buf, dmu_tx_t *tx)
{
ASSERT(!zfs_refcount_is_zero(&db->db_holds));
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2009-07-03 02:44:48 +04:00
ASSERT(db->db_level == 0);
ASSERT3U(dbuf_is_metadata(db), ==, arc_is_metadata(buf));
2009-07-03 02:44:48 +04:00
ASSERT(buf != NULL);
Fix send/recv lost spill block When receiving a DRR_OBJECT record the receive_object() function needs to determine how to handle a spill block associated with the object. It may need to be removed or kept depending on how the object was modified at the source. This determination is currently accomplished using a heuristic which takes in to account the DRR_OBJECT record and the existing object properties. This is a problem because there isn't quite enough information available to do the right thing under all circumstances. For example, when only the block size changes the spill block is removed when it should be kept. What's needed to resolve this is an additional flag in the DRR_OBJECT which indicates if the object being received references a spill block. The DRR_OBJECT_SPILL flag was added for this purpose. When set then the object references a spill block and it must be kept. Either it is update to date, or it will be replaced by a subsequent DRR_SPILL record. Conversely, if the object being received doesn't reference a spill block then any existing spill block should always be removed. Since previous versions of ZFS do not understand this new flag additional DRR_SPILL records will be inserted in to the stream. This has the advantage of being fully backward compatible. Existing ZFS systems receiving this stream will recreate the spill block if it was incorrectly removed. Updated ZFS versions will correctly ignore the additional spill blocks which can be identified by checking for the DRR_SPILL_UNMODIFIED flag. The small downside to this approach is that is may increase the size of the stream and of the received snapshot on previous versions of ZFS. Additionally, when receiving streams generated by previous unpatched versions of ZFS spill blocks may still be lost. OpenZFS-issue: https://www.illumos.org/issues/9952 FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277 Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8668
2019-05-08 01:18:44 +03:00
ASSERT3U(arc_buf_lsize(buf), ==, db->db.db_size);
2009-07-03 02:44:48 +04:00
ASSERT(tx->tx_txg != 0);
arc_return_buf(buf, db);
ASSERT(arc_released(buf));
mutex_enter(&db->db_mtx);
while (db->db_state == DB_READ || db->db_state == DB_FILL)
cv_wait(&db->db_changed, &db->db_mtx);
ASSERT(db->db_state == DB_CACHED || db->db_state == DB_UNCACHED);
if (db->db_state == DB_CACHED &&
zfs_refcount_count(&db->db_holds) - 1 > db->db_dirtycnt) {
/*
* In practice, we will never have a case where we have an
* encrypted arc buffer while additional holds exist on the
* dbuf. We don't handle this here so we simply assert that
* fact instead.
*/
ASSERT(!arc_is_encrypted(buf));
2009-07-03 02:44:48 +04:00
mutex_exit(&db->db_mtx);
(void) dbuf_dirty(db, tx);
bcopy(buf->b_data, db->db.db_data, db->db.db_size);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(buf, db);
2009-07-03 02:44:48 +04:00
return;
}
if (db->db_state == DB_CACHED) {
dbuf_dirty_record_t *dr = list_head(&db->db_dirty_records);
2009-07-03 02:44:48 +04:00
ASSERT(db->db_buf != NULL);
if (dr != NULL && dr->dr_txg == tx->tx_txg) {
ASSERT(dr->dt.dl.dr_data == db->db_buf);
2009-07-03 02:44:48 +04:00
if (!arc_released(db->db_buf)) {
ASSERT(dr->dt.dl.dr_override_state ==
DR_OVERRIDDEN);
arc_release(db->db_buf, db);
}
dr->dt.dl.dr_data = buf;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(db->db_buf, db);
2009-07-03 02:44:48 +04:00
} else if (dr == NULL || dr->dt.dl.dr_data != db->db_buf) {
arc_release(db->db_buf, db);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(db->db_buf, db);
2009-07-03 02:44:48 +04:00
}
db->db_buf = NULL;
}
ASSERT(db->db_buf == NULL);
dbuf_set_data(db, buf);
db->db_state = DB_FILL;
DTRACE_SET_STATE(db, "filling assigned arcbuf");
2009-07-03 02:44:48 +04:00
mutex_exit(&db->db_mtx);
(void) dbuf_dirty(db, tx);
dmu_buf_fill_done(&db->db, tx);
2009-07-03 02:44:48 +04:00
}
2008-11-20 23:01:55 +03:00
void
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_destroy(dmu_buf_impl_t *db)
2008-11-20 23:01:55 +03:00
{
dnode_t *dn;
2008-11-20 23:01:55 +03:00
dmu_buf_impl_t *parent = db->db_parent;
dmu_buf_impl_t *dndb;
2008-11-20 23:01:55 +03:00
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (db->db_buf != NULL) {
arc_buf_destroy(db->db_buf, db);
db->db_buf = NULL;
}
2008-11-20 23:01:55 +03:00
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (db->db_blkid == DMU_BONUS_BLKID) {
int slots = DB_DNODE(db)->dn_num_slots;
int bonuslen = DN_SLOTS_TO_BONUSLEN(slots);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (db->db.db_data != NULL) {
kmem_free(db->db.db_data, bonuslen);
arc_space_return(bonuslen, ARC_SPACE_BONUS);
db->db_state = DB_UNCACHED;
DTRACE_SET_STATE(db, "buffer cleared");
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
}
2008-11-20 23:01:55 +03:00
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_clear_data(db);
if (multilist_link_active(&db->db_cache_link)) {
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
ASSERT(db->db_caching_status == DB_DBUF_CACHE ||
db->db_caching_status == DB_DBUF_METADATA_CACHE);
multilist_remove(&dbuf_caches[db->db_caching_status].cache, db);
(void) zfs_refcount_remove_many(
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
&dbuf_caches[db->db_caching_status].size,
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
db->db.db_size, db);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
if (db->db_caching_status == DB_DBUF_METADATA_CACHE) {
DBUF_STAT_BUMPDOWN(metadata_cache_count);
} else {
DBUF_STAT_BUMPDOWN(cache_levels[db->db_level]);
DBUF_STAT_BUMPDOWN(cache_count);
DBUF_STAT_DECR(cache_levels_bytes[db->db_level],
db->db.db_size);
}
db->db_caching_status = DB_NO_CACHE;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
}
ASSERT(db->db_state == DB_UNCACHED || db->db_state == DB_NOFILL);
2008-11-20 23:01:55 +03:00
ASSERT(db->db_data_pending == NULL);
ASSERT(list_is_empty(&db->db_dirty_records));
2008-11-20 23:01:55 +03:00
db->db_state = DB_EVICTING;
DTRACE_SET_STATE(db, "buffer eviction started");
2008-11-20 23:01:55 +03:00
db->db_blkptr = NULL;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/*
* Now that db_state is DB_EVICTING, nobody else can find this via
* the hash table. We can now drop db_mtx, which allows us to
* acquire the dn_dbufs_mtx.
*/
mutex_exit(&db->db_mtx);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
dndb = dn->dn_dbuf;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (db->db_blkid != DMU_BONUS_BLKID) {
boolean_t needlock = !MUTEX_HELD(&dn->dn_dbufs_mtx);
if (needlock)
Fix lockdep recursive locking false positive in dbuf_destroy lockdep reports a possible recursive lock in dbuf_destroy. It is true that dbuf_destroy is acquiring the dn_dbufs_mtx on one dnode while holding it on another dnode. However, it is impossible for these to be the same dnode because, among other things,dbuf_destroy checks MUTEX_HELD before acquiring the mutex. This fix defines a class NESTED_SINGLE == 1 and changes that lock to call mutex_enter_nested with a subclass of NESTED_SINGLE. In order to make the userspace code compile, include/sys/zfs_context.h now defines mutex_enter_nested and NESTED_SINGLE. This is the lockdep report: [ 122.950921] ============================================ [ 122.950921] WARNING: possible recursive locking detected [ 122.950921] 4.19.29-4.19.0-debug-d69edad5368c1166 #1 Tainted: G O [ 122.950921] -------------------------------------------- [ 122.950921] dbu_evict/1457 is trying to acquire lock: [ 122.950921] 0000000083e9cbcf (&dn->dn_dbufs_mtx){+.+.}, at: dbuf_destroy+0x3c0/0xdb0 [zfs] [ 122.950921] but task is already holding lock: [ 122.950921] 0000000055523987 (&dn->dn_dbufs_mtx){+.+.}, at: dnode_evict_dbufs+0x90/0x740 [zfs] [ 122.950921] other info that might help us debug this: [ 122.950921] Possible unsafe locking scenario: [ 122.950921] CPU0 [ 122.950921] ---- [ 122.950921] lock(&dn->dn_dbufs_mtx); [ 122.950921] lock(&dn->dn_dbufs_mtx); [ 122.950921] *** DEADLOCK *** [ 122.950921] May be due to missing lock nesting notation [ 122.950921] 1 lock held by dbu_evict/1457: [ 122.950921] #0: 0000000055523987 (&dn->dn_dbufs_mtx){+.+.}, at: dnode_evict_dbufs+0x90/0x740 [zfs] [ 122.950921] stack backtrace: [ 122.950921] CPU: 0 PID: 1457 Comm: dbu_evict Tainted: G O 4.19.29-4.19.0-debug-d69edad5368c1166 #1 [ 122.950921] Hardware name: Supermicro H8SSL-I2/H8SSL-I2, BIOS 080011 03/13/2009 [ 122.950921] Call Trace: [ 122.950921] dump_stack+0x91/0xeb [ 122.950921] __lock_acquire+0x2ca7/0x4f10 [ 122.950921] lock_acquire+0x153/0x330 [ 122.950921] dbuf_destroy+0x3c0/0xdb0 [zfs] [ 122.950921] dbuf_evict_one+0x1cc/0x3d0 [zfs] [ 122.950921] dbuf_rele_and_unlock+0xb84/0xd60 [zfs] [ 122.950921] dnode_evict_dbufs+0x3a6/0x740 [zfs] [ 122.950921] dmu_objset_evict+0x7a/0x500 [zfs] [ 122.950921] dsl_dataset_evict_async+0x70/0x480 [zfs] [ 122.950921] taskq_thread+0x979/0x1480 [spl] [ 122.950921] kthread+0x2e7/0x3e0 [ 122.950921] ret_from_fork+0x27/0x50 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jeff Dike <jdike@akamai.com> Closes #8984
2019-07-17 19:18:24 +03:00
mutex_enter_nested(&dn->dn_dbufs_mtx,
NESTED_SINGLE);
avl_remove(&dn->dn_dbufs, db);
membar_producer();
DB_DNODE_EXIT(db);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (needlock)
mutex_exit(&dn->dn_dbufs_mtx);
/*
* Decrementing the dbuf count means that the hold corresponding
* to the removed dbuf is no longer discounted in dnode_move(),
* so the dnode cannot be moved until after we release the hold.
* The membar_producer() ensures visibility of the decremented
* value in dnode_move(), since DB_DNODE_EXIT doesn't actually
* release any lock.
*/
mutex_enter(&dn->dn_mtx);
dnode_rele_and_unlock(dn, db, B_TRUE);
db->db_dnode_handle = NULL;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_hash_remove(db);
} else {
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
}
ASSERT(zfs_refcount_is_zero(&db->db_holds));
2008-11-20 23:01:55 +03:00
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
db->db_parent = NULL;
ASSERT(db->db_buf == NULL);
ASSERT(db->db.db_data == NULL);
ASSERT(db->db_hash_next == NULL);
ASSERT(db->db_blkptr == NULL);
ASSERT(db->db_data_pending == NULL);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
ASSERT3U(db->db_caching_status, ==, DB_NO_CACHE);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT(!multilist_link_active(&db->db_cache_link));
kmem_cache_free(dbuf_kmem_cache, db);
arc_space_return(sizeof (dmu_buf_impl_t), ARC_SPACE_DBUF);
2008-11-20 23:01:55 +03:00
/*
* If this dbuf is referenced from an indirect dbuf,
2008-11-20 23:01:55 +03:00
* decrement the ref count on the indirect dbuf.
*/
if (parent && parent != dndb) {
mutex_enter(&parent->db_mtx);
dbuf_rele_and_unlock(parent, db, B_TRUE);
}
2008-11-20 23:01:55 +03:00
}
/*
* Note: While bpp will always be updated if the function returns success,
* parentp will not be updated if the dnode does not have dn_dbuf filled in;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
* this happens when the dnode is the meta-dnode, or {user|group|project}used
* object.
*/
__attribute__((always_inline))
static inline int
2008-11-20 23:01:55 +03:00
dbuf_findbp(dnode_t *dn, int level, uint64_t blkid, int fail_sparse,
dmu_buf_impl_t **parentp, blkptr_t **bpp)
2008-11-20 23:01:55 +03:00
{
*parentp = NULL;
*bpp = NULL;
ASSERT(blkid != DMU_BONUS_BLKID);
if (blkid == DMU_SPILL_BLKID) {
mutex_enter(&dn->dn_mtx);
if (dn->dn_have_spill &&
(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR))
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
*bpp = DN_SPILL_BLKPTR(dn->dn_phys);
else
*bpp = NULL;
dbuf_add_ref(dn->dn_dbuf, NULL);
*parentp = dn->dn_dbuf;
mutex_exit(&dn->dn_mtx);
return (0);
}
2008-11-20 23:01:55 +03:00
int nlevels =
(dn->dn_phys->dn_nlevels == 0) ? 1 : dn->dn_phys->dn_nlevels;
int epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
2008-11-20 23:01:55 +03:00
ASSERT3U(level * epbs, <, 64);
ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock));
/*
* This assertion shouldn't trip as long as the max indirect block size
* is less than 1M. The reason for this is that up to that point,
* the number of levels required to address an entire object with blocks
* of size SPA_MINBLOCKSIZE satisfies nlevels * epbs + 1 <= 64. In
* other words, if N * epbs + 1 > 64, then if (N-1) * epbs + 1 > 55
* (i.e. we can address the entire object), objects will all use at most
* N-1 levels and the assertion won't overflow. However, once epbs is
* 13, 4 * 13 + 1 = 53, but 5 * 13 + 1 = 66. Then, 4 levels will not be
* enough to address an entire object, so objects will have 5 levels,
* but then this assertion will overflow.
*
* All this is to say that if we ever increase DN_MAX_INDBLKSHIFT, we
* need to redo this logic to handle overflows.
*/
ASSERT(level >= nlevels ||
((nlevels - level - 1) * epbs) +
highbit64(dn->dn_phys->dn_nblkptr) <= 64);
2008-11-20 23:01:55 +03:00
if (level >= nlevels ||
blkid >= ((uint64_t)dn->dn_phys->dn_nblkptr <<
((nlevels - level - 1) * epbs)) ||
(fail_sparse &&
blkid > (dn->dn_phys->dn_maxblkid >> (level * epbs)))) {
2008-11-20 23:01:55 +03:00
/* the buffer has no parent yet */
return (SET_ERROR(ENOENT));
2008-11-20 23:01:55 +03:00
} else if (level < nlevels-1) {
/* this block is referenced from an indirect block */
int err;
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
err = dbuf_hold_impl(dn, level + 1,
blkid >> epbs, fail_sparse, FALSE, NULL, parentp);
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
2008-11-20 23:01:55 +03:00
if (err)
return (err);
err = dbuf_read(*parentp, NULL,
(DB_RF_HAVESTRUCT | DB_RF_NOPREFETCH | DB_RF_CANFAIL));
if (err) {
dbuf_rele(*parentp, NULL);
*parentp = NULL;
return (err);
}
rw_enter(&(*parentp)->db_rwlock, RW_READER);
2008-11-20 23:01:55 +03:00
*bpp = ((blkptr_t *)(*parentp)->db.db_data) +
(blkid & ((1ULL << epbs) - 1));
if (blkid > (dn->dn_phys->dn_maxblkid >> (level * epbs)))
ASSERT(BP_IS_HOLE(*bpp));
rw_exit(&(*parentp)->db_rwlock);
2008-11-20 23:01:55 +03:00
return (0);
} else {
/* the block is referenced from the dnode */
ASSERT3U(level, ==, nlevels-1);
ASSERT(dn->dn_phys->dn_nblkptr == 0 ||
blkid < dn->dn_phys->dn_nblkptr);
if (dn->dn_dbuf) {
dbuf_add_ref(dn->dn_dbuf, NULL);
*parentp = dn->dn_dbuf;
}
*bpp = &dn->dn_phys->dn_blkptr[blkid];
return (0);
}
}
static dmu_buf_impl_t *
dbuf_create(dnode_t *dn, uint8_t level, uint64_t blkid,
dmu_buf_impl_t *parent, blkptr_t *blkptr)
{
objset_t *os = dn->dn_objset;
2008-11-20 23:01:55 +03:00
dmu_buf_impl_t *db, *odb;
ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock));
ASSERT(dn->dn_type != DMU_OT_NONE);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
db = kmem_cache_alloc(dbuf_kmem_cache, KM_SLEEP);
2008-11-20 23:01:55 +03:00
list_create(&db->db_dirty_records, sizeof (dbuf_dirty_record_t),
offsetof(dbuf_dirty_record_t, dr_dbuf_node));
2008-11-20 23:01:55 +03:00
db->db_objset = os;
db->db.db_object = dn->dn_object;
db->db_level = level;
db->db_blkid = blkid;
db->db_dirtycnt = 0;
db->db_dnode_handle = dn->dn_handle;
2008-11-20 23:01:55 +03:00
db->db_parent = parent;
db->db_blkptr = blkptr;
db->db_user = NULL;
db->db_user_immediate_evict = FALSE;
db->db_freed_in_flight = FALSE;
db->db_pending_evict = FALSE;
2008-11-20 23:01:55 +03:00
if (blkid == DMU_BONUS_BLKID) {
2008-11-20 23:01:55 +03:00
ASSERT3P(parent, ==, dn->dn_dbuf);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
db->db.db_size = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots) -
2008-11-20 23:01:55 +03:00
(dn->dn_nblkptr-1) * sizeof (blkptr_t);
ASSERT3U(db->db.db_size, >=, dn->dn_bonuslen);
db->db.db_offset = DMU_BONUS_BLKID;
2008-11-20 23:01:55 +03:00
db->db_state = DB_UNCACHED;
DTRACE_SET_STATE(db, "bonus buffer created");
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
db->db_caching_status = DB_NO_CACHE;
2008-11-20 23:01:55 +03:00
/* the bonus dbuf is not placed in the hash table */
Limit the amount of dnode metadata in the ARC Metadata-intensive workloads can cause the ARC to become permanently filled with dnode_t objects as they're pinned by the VFS layer. Subsequent data-intensive workloads may only benefit from about 25% of the potential ARC (arc_c_max - arc_meta_limit). In order to help track metadata usage more precisely, the other_size metadata arcstat has replaced with dbuf_size, dnode_size and bonus_size. The new zfs_arc_dnode_limit tunable, which defaults to 10% of zfs_arc_meta_limit, defines the minimum number of bytes which is desirable to be consumed by dnodes. Attempts to evict non-metadata will trigger async prune tasks if the space used by dnodes exceeds this limit. The new zfs_arc_dnode_reduce_percent tunable specifies the amount by which the excess dnode space is attempted to be pruned as a percentage of the amount by which zfs_arc_dnode_limit is being exceeded. By default, it tries to unpin 10% of the dnodes. The problem of dnode metadata pinning was observed with the following testing procedure (in this example, zfs_arc_max is set to 4GiB): - Create a large number of small files until arc_meta_used exceeds arc_meta_limit (3GiB with default tuning) and arc_prune starts increasing. - Create a 3GiB file with dd. Observe arc_mata_used. It will still be around 3GiB. - Repeatedly read the 3GiB file and observe arc_meta_limit as before. It will continue to stay around 3GiB. With this modification, space for the 3GiB file is gradually made available as subsequent demands on the ARC are made. The previous behavior can be restored by setting zfs_arc_dnode_limit to the same value as the zfs_arc_meta_limit. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4345 Issue #4512 Issue #4773 Closes #4858
2016-07-13 15:42:40 +03:00
arc_space_consume(sizeof (dmu_buf_impl_t), ARC_SPACE_DBUF);
2008-11-20 23:01:55 +03:00
return (db);
} else if (blkid == DMU_SPILL_BLKID) {
db->db.db_size = (blkptr != NULL) ?
BP_GET_LSIZE(blkptr) : SPA_MINBLOCKSIZE;
db->db.db_offset = 0;
2008-11-20 23:01:55 +03:00
} else {
int blocksize =
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
db->db_level ? 1 << dn->dn_indblkshift : dn->dn_datablksz;
2008-11-20 23:01:55 +03:00
db->db.db_size = blocksize;
db->db.db_offset = db->db_blkid * blocksize;
}
/*
* Hold the dn_dbufs_mtx while we get the new dbuf
* in the hash table *and* added to the dbufs list.
* This prevents a possible deadlock with someone
* trying to look up this dbuf before it's added to the
2008-11-20 23:01:55 +03:00
* dn_dbufs list.
*/
mutex_enter(&dn->dn_dbufs_mtx);
db->db_state = DB_EVICTING; /* not worth logging this state change */
2008-11-20 23:01:55 +03:00
if ((odb = dbuf_hash_insert(db)) != NULL) {
/* someone else inserted it first */
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
kmem_cache_free(dbuf_kmem_cache, db);
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_dbufs_mtx);
DBUF_STAT_BUMP(hash_insert_race);
2008-11-20 23:01:55 +03:00
return (odb);
}
avl_add(&dn->dn_dbufs, db);
2008-11-20 23:01:55 +03:00
db->db_state = DB_UNCACHED;
DTRACE_SET_STATE(db, "regular buffer created");
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
db->db_caching_status = DB_NO_CACHE;
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_dbufs_mtx);
Limit the amount of dnode metadata in the ARC Metadata-intensive workloads can cause the ARC to become permanently filled with dnode_t objects as they're pinned by the VFS layer. Subsequent data-intensive workloads may only benefit from about 25% of the potential ARC (arc_c_max - arc_meta_limit). In order to help track metadata usage more precisely, the other_size metadata arcstat has replaced with dbuf_size, dnode_size and bonus_size. The new zfs_arc_dnode_limit tunable, which defaults to 10% of zfs_arc_meta_limit, defines the minimum number of bytes which is desirable to be consumed by dnodes. Attempts to evict non-metadata will trigger async prune tasks if the space used by dnodes exceeds this limit. The new zfs_arc_dnode_reduce_percent tunable specifies the amount by which the excess dnode space is attempted to be pruned as a percentage of the amount by which zfs_arc_dnode_limit is being exceeded. By default, it tries to unpin 10% of the dnodes. The problem of dnode metadata pinning was observed with the following testing procedure (in this example, zfs_arc_max is set to 4GiB): - Create a large number of small files until arc_meta_used exceeds arc_meta_limit (3GiB with default tuning) and arc_prune starts increasing. - Create a 3GiB file with dd. Observe arc_mata_used. It will still be around 3GiB. - Repeatedly read the 3GiB file and observe arc_meta_limit as before. It will continue to stay around 3GiB. With this modification, space for the 3GiB file is gradually made available as subsequent demands on the ARC are made. The previous behavior can be restored by setting zfs_arc_dnode_limit to the same value as the zfs_arc_meta_limit. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4345 Issue #4512 Issue #4773 Closes #4858
2016-07-13 15:42:40 +03:00
arc_space_consume(sizeof (dmu_buf_impl_t), ARC_SPACE_DBUF);
2008-11-20 23:01:55 +03:00
if (parent && parent != dn->dn_dbuf)
dbuf_add_ref(parent, db);
ASSERT(dn->dn_object == DMU_META_DNODE_OBJECT ||
zfs_refcount_count(&dn->dn_holds) > 0);
(void) zfs_refcount_add(&dn->dn_holds, db);
2008-11-20 23:01:55 +03:00
dprintf_dbuf(db, "db=%p\n", db);
return (db);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* This function returns a block pointer and information about the object,
* given a dnode and a block. This is a publicly accessible version of
* dbuf_findbp that only returns some information, rather than the
* dbuf. Note that the dnode passed in must be held, and the dn_struct_rwlock
* should be locked as (at least) a reader.
*/
int
dbuf_dnode_findbp(dnode_t *dn, uint64_t level, uint64_t blkid,
blkptr_t *bp, uint16_t *datablkszsec, uint8_t *indblkshift)
{
dmu_buf_impl_t *dbp = NULL;
blkptr_t *bp2;
int err = 0;
ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock));
err = dbuf_findbp(dn, level, blkid, B_FALSE, &dbp, &bp2);
if (err == 0) {
*bp = *bp2;
if (dbp != NULL)
dbuf_rele(dbp, NULL);
if (datablkszsec != NULL)
*datablkszsec = dn->dn_phys->dn_datablkszsec;
if (indblkshift != NULL)
*indblkshift = dn->dn_phys->dn_indblkshift;
}
return (err);
}
typedef struct dbuf_prefetch_arg {
spa_t *dpa_spa; /* The spa to issue the prefetch in. */
zbookmark_phys_t dpa_zb; /* The target block to prefetch. */
int dpa_epbs; /* Entries (blkptr_t's) Per Block Shift. */
int dpa_curlevel; /* The current level that we're reading */
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dnode_t *dpa_dnode; /* The dnode associated with the prefetch */
zio_priority_t dpa_prio; /* The priority I/Os should be issued at. */
zio_t *dpa_zio; /* The parent zio_t for all prefetches. */
arc_flags_t dpa_aflags; /* Flags to pass to the final prefetch. */
dbuf_prefetch_fn dpa_cb; /* prefetch completion callback */
void *dpa_arg; /* prefetch completion arg */
} dbuf_prefetch_arg_t;
static void
dbuf_prefetch_fini(dbuf_prefetch_arg_t *dpa, boolean_t io_done)
{
if (dpa->dpa_cb != NULL)
dpa->dpa_cb(dpa->dpa_arg, io_done);
kmem_free(dpa, sizeof (*dpa));
}
static void
dbuf_issue_final_prefetch_done(zio_t *zio, const zbookmark_phys_t *zb,
const blkptr_t *iobp, arc_buf_t *abuf, void *private)
{
dbuf_prefetch_arg_t *dpa = private;
dbuf_prefetch_fini(dpa, B_TRUE);
if (abuf != NULL)
arc_buf_destroy(abuf, private);
}
/*
* Actually issue the prefetch read for the block given.
*/
static void
dbuf_issue_final_prefetch(dbuf_prefetch_arg_t *dpa, blkptr_t *bp)
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT(!BP_IS_REDACTED(bp) ||
dsl_dataset_feature_is_active(
dpa->dpa_dnode->dn_objset->os_dsl_dataset,
SPA_FEATURE_REDACTED_DATASETS));
if (BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp) || BP_IS_REDACTED(bp))
return (dbuf_prefetch_fini(dpa, B_FALSE));
int zio_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE;
arc_flags_t aflags =
dpa->dpa_aflags | ARC_FLAG_NOWAIT | ARC_FLAG_PREFETCH |
ARC_FLAG_NO_BUF;
/* dnodes are always read as raw and then converted later */
if (BP_GET_TYPE(bp) == DMU_OT_DNODE && BP_IS_PROTECTED(bp) &&
dpa->dpa_curlevel == 0)
zio_flags |= ZIO_FLAG_RAW;
ASSERT3U(dpa->dpa_curlevel, ==, BP_GET_LEVEL(bp));
ASSERT3U(dpa->dpa_curlevel, ==, dpa->dpa_zb.zb_level);
ASSERT(dpa->dpa_zio != NULL);
(void) arc_read(dpa->dpa_zio, dpa->dpa_spa, bp,
dbuf_issue_final_prefetch_done, dpa,
dpa->dpa_prio, zio_flags, &aflags, &dpa->dpa_zb);
}
/*
* Called when an indirect block above our prefetch target is read in. This
* will either read in the next indirect block down the tree or issue the actual
* prefetch if the next block down is our target.
*/
static void
dbuf_prefetch_indirect_done(zio_t *zio, const zbookmark_phys_t *zb,
const blkptr_t *iobp, arc_buf_t *abuf, void *private)
{
dbuf_prefetch_arg_t *dpa = private;
ASSERT3S(dpa->dpa_zb.zb_level, <, dpa->dpa_curlevel);
ASSERT3S(dpa->dpa_curlevel, >, 0);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (abuf == NULL) {
ASSERT(zio == NULL || zio->io_error != 0);
return (dbuf_prefetch_fini(dpa, B_TRUE));
}
ASSERT(zio == NULL || zio->io_error == 0);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/*
* The dpa_dnode is only valid if we are called with a NULL
* zio. This indicates that the arc_read() returned without
* first calling zio_read() to issue a physical read. Once
* a physical read is made the dpa_dnode must be invalidated
* as the locks guarding it may have been dropped. If the
* dpa_dnode is still valid, then we want to add it to the dbuf
* cache. To do so, we must hold the dbuf associated with the block
* we just prefetched, read its contents so that we associate it
* with an arc_buf_t, and then release it.
*/
if (zio != NULL) {
ASSERT3S(BP_GET_LEVEL(zio->io_bp), ==, dpa->dpa_curlevel);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (zio->io_flags & ZIO_FLAG_RAW_COMPRESS) {
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ASSERT3U(BP_GET_PSIZE(zio->io_bp), ==, zio->io_size);
} else {
ASSERT3U(BP_GET_LSIZE(zio->io_bp), ==, zio->io_size);
}
ASSERT3P(zio->io_spa, ==, dpa->dpa_spa);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dpa->dpa_dnode = NULL;
} else if (dpa->dpa_dnode != NULL) {
uint64_t curblkid = dpa->dpa_zb.zb_blkid >>
(dpa->dpa_epbs * (dpa->dpa_curlevel -
dpa->dpa_zb.zb_level));
dmu_buf_impl_t *db = dbuf_hold_level(dpa->dpa_dnode,
dpa->dpa_curlevel, curblkid, FTAG);
if (db == NULL) {
arc_buf_destroy(abuf, private);
return (dbuf_prefetch_fini(dpa, B_TRUE));
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
(void) dbuf_read(db, NULL,
DB_RF_MUST_SUCCEED | DB_RF_NOPREFETCH | DB_RF_HAVESTRUCT);
dbuf_rele(db, FTAG);
}
dpa->dpa_curlevel--;
uint64_t nextblkid = dpa->dpa_zb.zb_blkid >>
(dpa->dpa_epbs * (dpa->dpa_curlevel - dpa->dpa_zb.zb_level));
blkptr_t *bp = ((blkptr_t *)abuf->b_data) +
P2PHASE(nextblkid, 1ULL << dpa->dpa_epbs);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT(!BP_IS_REDACTED(bp) ||
dsl_dataset_feature_is_active(
dpa->dpa_dnode->dn_objset->os_dsl_dataset,
SPA_FEATURE_REDACTED_DATASETS));
if (BP_IS_HOLE(bp) || BP_IS_REDACTED(bp)) {
dbuf_prefetch_fini(dpa, B_TRUE);
} else if (dpa->dpa_curlevel == dpa->dpa_zb.zb_level) {
ASSERT3U(nextblkid, ==, dpa->dpa_zb.zb_blkid);
dbuf_issue_final_prefetch(dpa, bp);
} else {
arc_flags_t iter_aflags = ARC_FLAG_NOWAIT;
zbookmark_phys_t zb;
/* flag if L2ARC eligible, l2arc_noprefetch then decides */
if (dpa->dpa_aflags & ARC_FLAG_L2CACHE)
iter_aflags |= ARC_FLAG_L2CACHE;
ASSERT3U(dpa->dpa_curlevel, ==, BP_GET_LEVEL(bp));
SET_BOOKMARK(&zb, dpa->dpa_zb.zb_objset,
dpa->dpa_zb.zb_object, dpa->dpa_curlevel, nextblkid);
(void) arc_read(dpa->dpa_zio, dpa->dpa_spa,
bp, dbuf_prefetch_indirect_done, dpa, dpa->dpa_prio,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE,
&iter_aflags, &zb);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(abuf, private);
}
/*
* Issue prefetch reads for the given block on the given level. If the indirect
* blocks above that block are not in memory, we will read them in
* asynchronously. As a result, this call never blocks waiting for a read to
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
* complete. Note that the prefetch might fail if the dataset is encrypted and
* the encryption key is unmapped before the IO completes.
*/
int
dbuf_prefetch_impl(dnode_t *dn, int64_t level, uint64_t blkid,
zio_priority_t prio, arc_flags_t aflags, dbuf_prefetch_fn cb,
void *arg)
2008-11-20 23:01:55 +03:00
{
blkptr_t bp;
int epbs, nlevels, curlevel;
uint64_t curblkid;
2008-11-20 23:01:55 +03:00
ASSERT(blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock));
if (blkid > dn->dn_maxblkid)
goto no_issue;
if (level == 0 && dnode_block_freed(dn, blkid))
goto no_issue;
2008-11-20 23:01:55 +03:00
/*
* This dnode hasn't been written to disk yet, so there's nothing to
* prefetch.
*/
nlevels = dn->dn_phys->dn_nlevels;
if (level >= nlevels || dn->dn_phys->dn_nblkptr == 0)
goto no_issue;
epbs = dn->dn_phys->dn_indblkshift - SPA_BLKPTRSHIFT;
if (dn->dn_phys->dn_maxblkid < blkid << (epbs * level))
goto no_issue;
dmu_buf_impl_t *db = dbuf_find(dn->dn_objset, dn->dn_object,
level, blkid);
if (db != NULL) {
mutex_exit(&db->db_mtx);
/*
* This dbuf already exists. It is either CACHED, or
* (we assume) about to be read or filled.
*/
goto no_issue;
2008-11-20 23:01:55 +03:00
}
/*
* Find the closest ancestor (indirect block) of the target block
* that is present in the cache. In this indirect block, we will
* find the bp that is at curlevel, curblkid.
*/
curlevel = level;
curblkid = blkid;
while (curlevel < nlevels - 1) {
int parent_level = curlevel + 1;
uint64_t parent_blkid = curblkid >> epbs;
dmu_buf_impl_t *db;
if (dbuf_hold_impl(dn, parent_level, parent_blkid,
FALSE, TRUE, FTAG, &db) == 0) {
blkptr_t *bpp = db->db_buf->b_data;
bp = bpp[P2PHASE(curblkid, 1 << epbs)];
dbuf_rele(db, FTAG);
break;
}
curlevel = parent_level;
curblkid = parent_blkid;
}
2008-11-20 23:01:55 +03:00
if (curlevel == nlevels - 1) {
/* No cached indirect blocks found. */
ASSERT3U(curblkid, <, dn->dn_phys->dn_nblkptr);
bp = dn->dn_phys->dn_blkptr[curblkid];
2008-11-20 23:01:55 +03:00
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
ASSERT(!BP_IS_REDACTED(&bp) ||
dsl_dataset_feature_is_active(dn->dn_objset->os_dsl_dataset,
SPA_FEATURE_REDACTED_DATASETS));
if (BP_IS_HOLE(&bp) || BP_IS_REDACTED(&bp))
goto no_issue;
ASSERT3U(curlevel, ==, BP_GET_LEVEL(&bp));
zio_t *pio = zio_root(dmu_objset_spa(dn->dn_objset), NULL, NULL,
ZIO_FLAG_CANFAIL);
dbuf_prefetch_arg_t *dpa = kmem_zalloc(sizeof (*dpa), KM_SLEEP);
dsl_dataset_t *ds = dn->dn_objset->os_dsl_dataset;
SET_BOOKMARK(&dpa->dpa_zb, ds != NULL ? ds->ds_object : DMU_META_OBJSET,
dn->dn_object, level, blkid);
dpa->dpa_curlevel = curlevel;
dpa->dpa_prio = prio;
dpa->dpa_aflags = aflags;
dpa->dpa_spa = dn->dn_objset->os_spa;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dpa->dpa_dnode = dn;
dpa->dpa_epbs = epbs;
dpa->dpa_zio = pio;
dpa->dpa_cb = cb;
dpa->dpa_arg = arg;
/* flag if L2ARC eligible, l2arc_noprefetch then decides */
if (DNODE_LEVEL_IS_L2CACHEABLE(dn, level))
dpa->dpa_aflags |= ARC_FLAG_L2CACHE;
/*
* If we have the indirect just above us, no need to do the asynchronous
* prefetch chain; we'll just run the last step ourselves. If we're at
* a higher level, though, we want to issue the prefetches for all the
* indirect blocks asynchronously, so we can go on with whatever we were
* doing.
*/
if (curlevel == level) {
ASSERT3U(curblkid, ==, blkid);
dbuf_issue_final_prefetch(dpa, &bp);
} else {
arc_flags_t iter_aflags = ARC_FLAG_NOWAIT;
zbookmark_phys_t zb;
/* flag if L2ARC eligible, l2arc_noprefetch then decides */
if (DNODE_LEVEL_IS_L2CACHEABLE(dn, level))
iter_aflags |= ARC_FLAG_L2CACHE;
SET_BOOKMARK(&zb, ds != NULL ? ds->ds_object : DMU_META_OBJSET,
dn->dn_object, curlevel, curblkid);
(void) arc_read(dpa->dpa_zio, dpa->dpa_spa,
&bp, dbuf_prefetch_indirect_done, dpa, prio,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE,
&iter_aflags, &zb);
}
/*
* We use pio here instead of dpa_zio since it's possible that
* dpa may have already been freed.
*/
zio_nowait(pio);
return (1);
no_issue:
if (cb != NULL)
cb(arg, B_FALSE);
return (0);
}
int
dbuf_prefetch(dnode_t *dn, int64_t level, uint64_t blkid, zio_priority_t prio,
arc_flags_t aflags)
{
return (dbuf_prefetch_impl(dn, level, blkid, prio, aflags, NULL, NULL));
2008-11-20 23:01:55 +03:00
}
/*
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
* Helper function for dbuf_hold_impl() to copy a buffer. Handles
* the case of encrypted, compressed and uncompressed buffers by
* allocating the new buffer, respectively, with arc_alloc_raw_buf(),
* arc_alloc_compressed_buf() or arc_alloc_buf().*
*
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
* NOTE: Declared noinline to avoid stack bloat in dbuf_hold_impl().
*/
noinline static void
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
dbuf_hold_copy(dnode_t *dn, dmu_buf_impl_t *db)
{
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
dbuf_dirty_record_t *dr = db->db_data_pending;
arc_buf_t *data = dr->dt.dl.dr_data;
enum zio_compress compress_type = arc_get_compression(data);
uint8_t complevel = arc_get_complevel(data);
if (arc_is_encrypted(data)) {
boolean_t byteorder;
uint8_t salt[ZIO_DATA_SALT_LEN];
uint8_t iv[ZIO_DATA_IV_LEN];
uint8_t mac[ZIO_DATA_MAC_LEN];
arc_get_raw_params(data, &byteorder, salt, iv, mac);
dbuf_set_data(db, arc_alloc_raw_buf(dn->dn_objset->os_spa, db,
dmu_objset_id(dn->dn_objset), byteorder, salt, iv, mac,
dn->dn_type, arc_buf_size(data), arc_buf_lsize(data),
compress_type, complevel));
} else if (compress_type != ZIO_COMPRESS_OFF) {
dbuf_set_data(db, arc_alloc_compressed_buf(
dn->dn_objset->os_spa, db, arc_buf_size(data),
arc_buf_lsize(data), compress_type, complevel));
} else {
dbuf_set_data(db, arc_alloc_buf(dn->dn_objset->os_spa, db,
DBUF_GET_BUFC_TYPE(db), db->db.db_size));
}
rw_enter(&db->db_rwlock, RW_WRITER);
bcopy(data->b_data, db->db.db_data, arc_buf_size(data));
rw_exit(&db->db_rwlock);
}
2008-11-20 23:01:55 +03:00
/*
* Returns with db_holds incremented, and db_mtx not held.
* Note: dn_struct_rwlock must be held.
*/
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
int
dbuf_hold_impl(dnode_t *dn, uint8_t level, uint64_t blkid,
boolean_t fail_sparse, boolean_t fail_uncached,
void *tag, dmu_buf_impl_t **dbp)
2008-11-20 23:01:55 +03:00
{
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
dmu_buf_impl_t *db, *parent = NULL;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/* If the pool has been created, verify the tx_sync_lock is not held */
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
spa_t *spa = dn->dn_objset->os_spa;
dsl_pool_t *dp = spa->spa_dsl_pool;
if (dp != NULL) {
ASSERT(!MUTEX_HELD(&dp->dp_tx.tx_sync_lock));
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
ASSERT(blkid != DMU_BONUS_BLKID);
ASSERT(RW_LOCK_HELD(&dn->dn_struct_rwlock));
ASSERT3U(dn->dn_nlevels, >, level);
*dbp = NULL;
2008-11-20 23:01:55 +03:00
/* dbuf_find() returns with db_mtx held */
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
db = dbuf_find(dn->dn_objset, dn->dn_object, level, blkid);
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (db == NULL) {
blkptr_t *bp = NULL;
int err;
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (fail_uncached)
return (SET_ERROR(ENOENT));
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
ASSERT3P(parent, ==, NULL);
err = dbuf_findbp(dn, level, blkid, fail_sparse, &parent, &bp);
if (fail_sparse) {
if (err == 0 && bp && BP_IS_HOLE(bp))
err = SET_ERROR(ENOENT);
if (err) {
if (parent)
dbuf_rele(parent, NULL);
return (err);
2008-11-20 23:01:55 +03:00
}
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (err && err != ENOENT)
return (err);
db = dbuf_create(dn, level, blkid, parent, bp);
2008-11-20 23:01:55 +03:00
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (fail_uncached && db->db_state != DB_CACHED) {
mutex_exit(&db->db_mtx);
return (SET_ERROR(ENOENT));
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (db->db_buf != NULL) {
arc_buf_access(db->db_buf);
ASSERT3P(db->db.db_data, ==, db->db_buf->b_data);
}
2008-11-20 23:01:55 +03:00
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
ASSERT(db->db_buf == NULL || arc_referenced(db->db_buf));
2008-11-20 23:01:55 +03:00
/*
* If this buffer is currently syncing out, and we are
2008-11-20 23:01:55 +03:00
* still referencing it from db_data, we need to make a copy
* of it in case we decide we want to dirty it again in this txg.
*/
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (db->db_level == 0 && db->db_blkid != DMU_BONUS_BLKID &&
dn->dn_object != DMU_META_DNODE_OBJECT &&
db->db_state == DB_CACHED && db->db_data_pending) {
dbuf_dirty_record_t *dr = db->db_data_pending;
if (dr->dt.dl.dr_data == db->db_buf)
dbuf_hold_copy(dn, db);
}
if (multilist_link_active(&db->db_cache_link)) {
ASSERT(zfs_refcount_is_zero(&db->db_holds));
ASSERT(db->db_caching_status == DB_DBUF_CACHE ||
db->db_caching_status == DB_DBUF_METADATA_CACHE);
multilist_remove(&dbuf_caches[db->db_caching_status].cache, db);
(void) zfs_refcount_remove_many(
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
&dbuf_caches[db->db_caching_status].size,
db->db.db_size, db);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (db->db_caching_status == DB_DBUF_METADATA_CACHE) {
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
DBUF_STAT_BUMPDOWN(metadata_cache_count);
} else {
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
DBUF_STAT_BUMPDOWN(cache_levels[db->db_level]);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
DBUF_STAT_BUMPDOWN(cache_count);
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
DBUF_STAT_DECR(cache_levels_bytes[db->db_level],
db->db.db_size);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
db->db_caching_status = DB_NO_CACHE;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
}
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
(void) zfs_refcount_add(&db->db_holds, tag);
DBUF_VERIFY(db);
mutex_exit(&db->db_mtx);
2008-11-20 23:01:55 +03:00
/* NOTE: we can't rele the parent until after we drop the db_mtx */
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
if (parent)
dbuf_rele(parent, NULL);
2008-11-20 23:01:55 +03:00
dbuf_hold_impl() cleanup to improve cached read performance Currently every dbuf_hold_impl() incurs kmem_alloc() and kmem_free() which can be costly for cached read performance. This change reverts the dbuf_hold_impl() fix stack commit, i.e. fc5bb51f08a6c91ff9ad3559d0266eeeab0b1f61 to eliminate the extra kmem_alloc() and kmem_free() operations and improve cached read performance. With the change, each dbuf_hold_impl() frame uses 40 bytes more, total of 800 for 20 recursive levels. Linux kernel stack sizes are 8K and 16K for 32bit and 64bit, respectively, so stack overrun risk is limited. Sample stack output comparisons with 50 PB file and recordsize=512 Current code 11) 2240 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2176 264 dbuf_read_impl.constprop.16+0x2e3/0x7f0 [zfs] 13) 1912 120 dbuf_read+0xe5/0x520 [zfs] 14) 1792 56 dbuf_hold_impl_arg+0x572/0x630 [zfs] 15) 1736 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 16) 1672 64 dbuf_hold_impl_arg+0x508/0x630 [zfs] 17) 1608 40 dbuf_hold_impl+0x23/0x40 [zfs] 18) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 19) 1528 16 dbuf_hold+0x16/0x20 [zfs] dbuf_hold_impl() cleanup 11) 2320 64 arc_alloc_buf+0x4a/0xd0 [zfs] 12) 2256 264 dbuf_read_impl.constprop.17+0x2e3/0x7f0 [zfs] 13) 1992 120 dbuf_read+0xe5/0x520 [zfs] 14) 1872 96 dbuf_hold_impl+0x50f/0x5e0 [zfs] 15) 1776 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 16) 1672 104 dbuf_hold_impl+0x4df/0x5e0 [zfs] 17) 1568 40 dbuf_hold_level+0x32/0x60 [zfs] 18) 1528 16 dbuf_hold+0x16/0x20 [zfs] Performance observations on 8K recordsize filesystem: - 8/128/1024K at 1-128 sequential cached read, ~3% improvement Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on VMware ESX. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com> Closes #9351
2019-10-04 01:33:38 +03:00
ASSERT3P(DB_DNODE(db), ==, dn);
ASSERT3U(db->db_blkid, ==, blkid);
ASSERT3U(db->db_level, ==, level);
*dbp = db;
2008-11-20 23:01:55 +03:00
return (0);
}
dmu_buf_impl_t *
dbuf_hold(dnode_t *dn, uint64_t blkid, void *tag)
{
return (dbuf_hold_level(dn, 0, blkid, tag));
2008-11-20 23:01:55 +03:00
}
dmu_buf_impl_t *
dbuf_hold_level(dnode_t *dn, int level, uint64_t blkid, void *tag)
{
dmu_buf_impl_t *db;
int err = dbuf_hold_impl(dn, level, blkid, FALSE, FALSE, tag, &db);
2008-11-20 23:01:55 +03:00
return (err ? NULL : db);
}
void
dbuf_create_bonus(dnode_t *dn)
{
ASSERT(RW_WRITE_HELD(&dn->dn_struct_rwlock));
ASSERT(dn->dn_bonus == NULL);
dn->dn_bonus = dbuf_create(dn, 0, DMU_BONUS_BLKID, dn->dn_dbuf, NULL);
}
int
dbuf_spill_set_blksz(dmu_buf_t *db_fake, uint64_t blksz, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
if (db->db_blkid != DMU_SPILL_BLKID)
return (SET_ERROR(ENOTSUP));
if (blksz == 0)
blksz = SPA_MINBLOCKSIZE;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
ASSERT3U(blksz, <=, spa_maxblocksize(dmu_objset_spa(db->db_objset)));
blksz = P2ROUNDUP(blksz, SPA_MINBLOCKSIZE);
dbuf_new_size(db, blksz, tx);
return (0);
}
void
dbuf_rm_spill(dnode_t *dn, dmu_tx_t *tx)
{
dbuf_free_range(dn, DMU_SPILL_BLKID, DMU_SPILL_BLKID, tx);
2008-11-20 23:01:55 +03:00
}
#pragma weak dmu_buf_add_ref = dbuf_add_ref
void
dbuf_add_ref(dmu_buf_impl_t *db, void *tag)
{
int64_t holds = zfs_refcount_add(&db->db_holds, tag);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
VERIFY3S(holds, >, 1);
2008-11-20 23:01:55 +03:00
}
#pragma weak dmu_buf_try_add_ref = dbuf_try_add_ref
boolean_t
dbuf_try_add_ref(dmu_buf_t *db_fake, objset_t *os, uint64_t obj, uint64_t blkid,
void *tag)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
dmu_buf_impl_t *found_db;
boolean_t result = B_FALSE;
if (blkid == DMU_BONUS_BLKID)
found_db = dbuf_find_bonus(os, obj);
else
found_db = dbuf_find(os, obj, 0, blkid);
if (found_db != NULL) {
if (db == found_db && dbuf_refcount(db) > db->db_dirtycnt) {
(void) zfs_refcount_add(&db->db_holds, tag);
result = B_TRUE;
}
mutex_exit(&found_db->db_mtx);
}
return (result);
}
/*
* If you call dbuf_rele() you had better not be referencing the dnode handle
* unless you have some other direct or indirect hold on the dnode. (An indirect
* hold is a hold on one of the dnode's dbufs, including the bonus buffer.)
* Without that, the dbuf_rele() could lead to a dnode_rele() followed by the
* dnode's parent dbuf evicting its dnode handles.
*/
2008-11-20 23:01:55 +03:00
void
dbuf_rele(dmu_buf_impl_t *db, void *tag)
{
mutex_enter(&db->db_mtx);
dbuf_rele_and_unlock(db, tag, B_FALSE);
}
void
dmu_buf_rele(dmu_buf_t *db, void *tag)
{
dbuf_rele((dmu_buf_impl_t *)db, tag);
}
/*
* dbuf_rele() for an already-locked dbuf. This is necessary to allow
* db_dirtycnt and db_holds to be updated atomically. The 'evicting'
* argument should be set if we are already in the dbuf-evicting code
* path, in which case we don't want to recursively evict. This allows us to
* avoid deeply nested stacks that would have a call flow similar to this:
*
* dbuf_rele()-->dbuf_rele_and_unlock()-->dbuf_evict_notify()
* ^ |
* | |
* +-----dbuf_destroy()<--dbuf_evict_one()<--------+
*
*/
void
dbuf_rele_and_unlock(dmu_buf_impl_t *db, void *tag, boolean_t evicting)
2008-11-20 23:01:55 +03:00
{
int64_t holds;
uint64_t size;
2008-11-20 23:01:55 +03:00
ASSERT(MUTEX_HELD(&db->db_mtx));
2008-11-20 23:01:55 +03:00
DBUF_VERIFY(db);
/*
* Remove the reference to the dbuf before removing its hold on the
* dnode so we can guarantee in dnode_move() that a referenced bonus
* buffer has a corresponding dnode hold.
*/
holds = zfs_refcount_remove(&db->db_holds, tag);
2008-11-20 23:01:55 +03:00
ASSERT(holds >= 0);
/*
* We can't freeze indirects if there is a possibility that they
* may be modified in the current syncing context.
*/
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (db->db_buf != NULL &&
holds == (db->db_level == 0 ? db->db_dirtycnt : 0)) {
2008-11-20 23:01:55 +03:00
arc_buf_freeze(db->db_buf);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
}
2008-11-20 23:01:55 +03:00
if (holds == db->db_dirtycnt &&
db->db_level == 0 && db->db_user_immediate_evict)
2008-11-20 23:01:55 +03:00
dbuf_evict_user(db);
if (holds == 0) {
if (db->db_blkid == DMU_BONUS_BLKID) {
dnode_t *dn;
boolean_t evict_dbuf = db->db_pending_evict;
/*
* If the dnode moves here, we cannot cross this
* barrier until the move completes.
*/
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
atomic_dec_32(&dn->dn_dbufs_count);
/*
* Decrementing the dbuf count means that the bonus
* buffer's dnode hold is no longer discounted in
* dnode_move(). The dnode cannot move until after
* the dnode_rele() below.
*/
DB_DNODE_EXIT(db);
/*
* Do not reference db after its lock is dropped.
* Another thread may evict it.
*/
mutex_exit(&db->db_mtx);
if (evict_dbuf)
dnode_evict_bonus(dn);
dnode_rele(dn, db);
2008-11-20 23:01:55 +03:00
} else if (db->db_buf == NULL) {
/*
* This is a special case: we never associated this
* dbuf with any data allocated from the ARC.
*/
ASSERT(db->db_state == DB_UNCACHED ||
db->db_state == DB_NOFILL);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_destroy(db);
2008-11-20 23:01:55 +03:00
} else if (arc_released(db->db_buf)) {
/*
* This dbuf has anonymous data associated with it.
*/
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
dbuf_destroy(db);
2008-11-20 23:01:55 +03:00
} else {
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
boolean_t do_arc_evict = B_FALSE;
blkptr_t bp;
spa_t *spa = dmu_objset_spa(db->db_objset);
if (!DBUF_IS_CACHEABLE(db) &&
db->db_blkptr != NULL &&
!BP_IS_HOLE(db->db_blkptr) &&
!BP_IS_EMBEDDED(db->db_blkptr)) {
do_arc_evict = B_TRUE;
bp = *db->db_blkptr;
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (!DBUF_IS_CACHEABLE(db) ||
db->db_pending_evict) {
dbuf_destroy(db);
} else if (!multilist_link_active(&db->db_cache_link)) {
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
ASSERT3U(db->db_caching_status, ==,
DB_NO_CACHE);
dbuf_cached_state_t dcs =
dbuf_include_in_metadata_cache(db) ?
DB_DBUF_METADATA_CACHE : DB_DBUF_CACHE;
db->db_caching_status = dcs;
multilist_insert(&dbuf_caches[dcs].cache, db);
uint64_t db_size = db->db.db_size;
size = zfs_refcount_add_many(
&dbuf_caches[dcs].size, db_size, db);
uint8_t db_level = db->db_level;
mutex_exit(&db->db_mtx);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
if (dcs == DB_DBUF_METADATA_CACHE) {
DBUF_STAT_BUMP(metadata_cache_count);
DBUF_STAT_MAX(
metadata_cache_size_bytes_max,
size);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
} else {
DBUF_STAT_BUMP(cache_count);
DBUF_STAT_MAX(cache_size_bytes_max,
size);
DBUF_STAT_BUMP(cache_levels[db_level]);
DBUF_STAT_INCR(
cache_levels_bytes[db_level],
db_size);
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (dcs == DB_DBUF_CACHE && !evicting)
dbuf_evict_notify(size);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
if (do_arc_evict)
arc_freed(spa, &bp);
2008-11-20 23:01:55 +03:00
}
} else {
mutex_exit(&db->db_mtx);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
2008-11-20 23:01:55 +03:00
}
#pragma weak dmu_buf_refcount = dbuf_refcount
uint64_t
dbuf_refcount(dmu_buf_impl_t *db)
{
return (zfs_refcount_count(&db->db_holds));
2008-11-20 23:01:55 +03:00
}
uint64_t
dmu_buf_user_refcount(dmu_buf_t *db_fake)
{
uint64_t holds;
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
mutex_enter(&db->db_mtx);
ASSERT3U(zfs_refcount_count(&db->db_holds), >=, db->db_dirtycnt);
holds = zfs_refcount_count(&db->db_holds) - db->db_dirtycnt;
mutex_exit(&db->db_mtx);
return (holds);
}
2008-11-20 23:01:55 +03:00
void *
dmu_buf_replace_user(dmu_buf_t *db_fake, dmu_buf_user_t *old_user,
dmu_buf_user_t *new_user)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
mutex_enter(&db->db_mtx);
dbuf_verify_user(db, DBVU_NOT_EVICTING);
if (db->db_user == old_user)
db->db_user = new_user;
else
old_user = db->db_user;
dbuf_verify_user(db, DBVU_NOT_EVICTING);
mutex_exit(&db->db_mtx);
return (old_user);
2008-11-20 23:01:55 +03:00
}
void *
dmu_buf_set_user(dmu_buf_t *db_fake, dmu_buf_user_t *user)
2008-11-20 23:01:55 +03:00
{
return (dmu_buf_replace_user(db_fake, NULL, user));
2008-11-20 23:01:55 +03:00
}
void *
dmu_buf_set_user_ie(dmu_buf_t *db_fake, dmu_buf_user_t *user)
2008-11-20 23:01:55 +03:00
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
db->db_user_immediate_evict = TRUE;
return (dmu_buf_set_user(db_fake, user));
}
2008-11-20 23:01:55 +03:00
void *
dmu_buf_remove_user(dmu_buf_t *db_fake, dmu_buf_user_t *user)
{
return (dmu_buf_replace_user(db_fake, user, NULL));
2008-11-20 23:01:55 +03:00
}
void *
dmu_buf_get_user(dmu_buf_t *db_fake)
{
dmu_buf_impl_t *db = (dmu_buf_impl_t *)db_fake;
dbuf_verify_user(db, DBVU_NOT_EVICTING);
return (db->db_user);
}
void
dmu_buf_user_evict_wait()
{
taskq_wait(dbu_evict_taskq);
2008-11-20 23:01:55 +03:00
}
blkptr_t *
dmu_buf_get_blkptr(dmu_buf_t *db)
{
dmu_buf_impl_t *dbi = (dmu_buf_impl_t *)db;
return (dbi->db_blkptr);
}
objset_t *
dmu_buf_get_objset(dmu_buf_t *db)
{
dmu_buf_impl_t *dbi = (dmu_buf_impl_t *)db;
return (dbi->db_objset);
}
OpenZFS 7004 - dmu_tx_hold_zap() does dnode_hold() 7x on same object Using a benchmark which has 32 threads creating 2 million files in the same directory, on a machine with 16 CPU cores, I observed poor performance. I noticed that dmu_tx_hold_zap() was using about 30% of all CPU, and doing dnode_hold() 7 times on the same object (the ZAP object that is being held). dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the dnode_t that we already have in hand, rather than repeatedly calling dnode_hold(). To do this, we need to pass the dnode_t down through all the intermediate calls that dmu_tx_hold_zap() makes, making these routines take the dnode_t* rather than an objset_t* and a uint64_t object number. In particular, the following routines will need to have analogous *_by_dnode() variants created: dmu_buf_hold_noread() dmu_buf_hold() zap_lookup() zap_lookup_norm() zap_count_write() zap_lockdir() zap_count_write() This can improve performance on the benchmark described above by 100%, from 30,000 file creations per second to 60,000. (This improvement is on top of that provided by working around the object allocation issue. Peak performance of ~90,000 creations per second was observed with 8 CPUs; adding CPUs past that decreased performance due to lock contention.) The CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds to 40 CPU-seconds. Sponsored by: Intel Corp. Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7004 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/109 Closes #4641 Closes #4972
2016-07-21 01:42:13 +03:00
dnode_t *
dmu_buf_dnode_enter(dmu_buf_t *db)
{
dmu_buf_impl_t *dbi = (dmu_buf_impl_t *)db;
DB_DNODE_ENTER(dbi);
return (DB_DNODE(dbi));
}
void
dmu_buf_dnode_exit(dmu_buf_t *db)
{
dmu_buf_impl_t *dbi = (dmu_buf_impl_t *)db;
DB_DNODE_EXIT(dbi);
}
2008-11-20 23:01:55 +03:00
static void
dbuf_check_blkptr(dnode_t *dn, dmu_buf_impl_t *db)
{
/* ASSERT(dmu_tx_is_syncing(tx) */
ASSERT(MUTEX_HELD(&db->db_mtx));
if (db->db_blkptr != NULL)
return;
if (db->db_blkid == DMU_SPILL_BLKID) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
db->db_blkptr = DN_SPILL_BLKPTR(dn->dn_phys);
BP_ZERO(db->db_blkptr);
return;
}
2008-11-20 23:01:55 +03:00
if (db->db_level == dn->dn_phys->dn_nlevels-1) {
/*
* This buffer was allocated at a time when there was
* no available blkptrs from the dnode, or it was
* inappropriate to hook it in (i.e., nlevels mismatch).
2008-11-20 23:01:55 +03:00
*/
ASSERT(db->db_blkid < dn->dn_phys->dn_nblkptr);
ASSERT(db->db_parent == NULL);
db->db_parent = dn->dn_dbuf;
db->db_blkptr = &dn->dn_phys->dn_blkptr[db->db_blkid];
DBUF_VERIFY(db);
} else {
dmu_buf_impl_t *parent = db->db_parent;
int epbs = dn->dn_phys->dn_indblkshift - SPA_BLKPTRSHIFT;
ASSERT(dn->dn_phys->dn_nlevels > 1);
if (parent == NULL) {
mutex_exit(&db->db_mtx);
rw_enter(&dn->dn_struct_rwlock, RW_READER);
parent = dbuf_hold_level(dn, db->db_level + 1,
db->db_blkid >> epbs, db);
2008-11-20 23:01:55 +03:00
rw_exit(&dn->dn_struct_rwlock);
mutex_enter(&db->db_mtx);
db->db_parent = parent;
}
db->db_blkptr = (blkptr_t *)parent->db.db_data +
(db->db_blkid & ((1ULL << epbs) - 1));
DBUF_VERIFY(db);
}
}
static void
dbuf_sync_bonus(dbuf_dirty_record_t *dr, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
void *data = dr->dt.dl.dr_data;
ASSERT0(db->db_level);
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT(db->db_blkid == DMU_BONUS_BLKID);
ASSERT(data != NULL);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
ASSERT3U(DN_MAX_BONUS_LEN(dn->dn_phys), <=,
DN_SLOTS_TO_BONUSLEN(dn->dn_phys->dn_extra_slots + 1));
bcopy(data, DN_BONUS(dn->dn_phys), DN_MAX_BONUS_LEN(dn->dn_phys));
dbuf_sync_leaf_verify_bonus_dnode(dr);
dbuf_undirty_bonus(dr);
dbuf_rele_and_unlock(db, (void *)(uintptr_t)tx->tx_txg, B_FALSE);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* When syncing out a blocks of dnodes, adjust the block to deal with
* encryption. Normally, we make sure the block is decrypted before writing
* it. If we have crypt params, then we are writing a raw (encrypted) block,
* from a raw receive. In this case, set the ARC buf's crypt params so
* that the BP will be filled with the correct byteorder, salt, iv, and mac.
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
*/
static void
dbuf_prepare_encrypted_dnode_leaf(dbuf_dirty_record_t *dr)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
{
int err;
dmu_buf_impl_t *db = dr->dr_dbuf;
ASSERT(MUTEX_HELD(&db->db_mtx));
ASSERT3U(db->db.db_object, ==, DMU_META_DNODE_OBJECT);
ASSERT3U(db->db_level, ==, 0);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (!db->db_objset->os_raw_receive && arc_is_encrypted(db->db_buf)) {
zbookmark_phys_t zb;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* Unfortunately, there is currently no mechanism for
* syncing context to handle decryption errors. An error
* here is only possible if an attacker maliciously
* changed a dnode block and updated the associated
* checksums going up the block tree.
*/
SET_BOOKMARK(&zb, dmu_objset_id(db->db_objset),
db->db.db_object, db->db_level, db->db_blkid);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
err = arc_untransform(db->db_buf, db->db_objset->os_spa,
&zb, B_TRUE);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (err)
panic("Invalid dnode block MAC");
} else if (dr->dt.dl.dr_has_raw_params) {
(void) arc_release(dr->dt.dl.dr_data, db);
arc_convert_to_raw(dr->dt.dl.dr_data,
dmu_objset_id(db->db_objset),
dr->dt.dl.dr_byteorder, DMU_OT_DNODE,
dr->dt.dl.dr_salt, dr->dt.dl.dr_iv, dr->dt.dl.dr_mac);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
}
}
/*
* dbuf_sync_indirect() is called recursively from dbuf_sync_list() so it
* is critical the we not allow the compiler to inline this function in to
* dbuf_sync_list() thereby drastically bloating the stack usage.
*/
noinline static void
2008-11-20 23:01:55 +03:00
dbuf_sync_indirect(dbuf_dirty_record_t *dr, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
2008-11-20 23:01:55 +03:00
ASSERT(dmu_tx_is_syncing(tx));
dprintf_dbuf_bp(db, db->db_blkptr, "blkptr=%p", db->db_blkptr);
mutex_enter(&db->db_mtx);
ASSERT(db->db_level > 0);
DBUF_VERIFY(db);
/* Read the block if it hasn't been read yet. */
2008-11-20 23:01:55 +03:00
if (db->db_buf == NULL) {
mutex_exit(&db->db_mtx);
(void) dbuf_read(db, NULL, DB_RF_MUST_SUCCEED);
mutex_enter(&db->db_mtx);
}
ASSERT3U(db->db_state, ==, DB_CACHED);
ASSERT(db->db_buf != NULL);
/* Indirect block size must match what the dnode thinks it is. */
ASSERT3U(db->db.db_size, ==, 1<<dn->dn_phys->dn_indblkshift);
2008-11-20 23:01:55 +03:00
dbuf_check_blkptr(dn, db);
/* Provide the pending dirty record to child dbufs */
2008-11-20 23:01:55 +03:00
db->db_data_pending = dr;
mutex_exit(&db->db_mtx);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dbuf_write(dr, db->db_buf, tx);
2008-11-20 23:01:55 +03:00
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
zio_t *zio = dr->dr_zio;
2008-11-20 23:01:55 +03:00
mutex_enter(&dr->dt.di.dr_mtx);
dbuf_sync_list(&dr->dt.di.dr_children, db->db_level - 1, tx);
2008-11-20 23:01:55 +03:00
ASSERT(list_head(&dr->dt.di.dr_children) == NULL);
mutex_exit(&dr->dt.di.dr_mtx);
zio_nowait(zio);
}
/*
* Verify that the size of the data in our bonus buffer does not exceed
* its recorded size.
*
* The purpose of this verification is to catch any cases in development
* where the size of a phys structure (i.e space_map_phys_t) grows and,
* due to incorrect feature management, older pools expect to read more
* data even though they didn't actually write it to begin with.
*
* For a example, this would catch an error in the feature logic where we
* open an older pool and we expect to write the space map histogram of
* a space map with size SPACE_MAP_SIZE_V0.
*/
static void
dbuf_sync_leaf_verify_bonus_dnode(dbuf_dirty_record_t *dr)
{
#ifdef ZFS_DEBUG
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
/*
* Encrypted bonus buffers can have data past their bonuslen.
* Skip the verification of these blocks.
*/
if (DMU_OT_IS_ENCRYPTED(dn->dn_bonustype))
return;
uint16_t bonuslen = dn->dn_phys->dn_bonuslen;
uint16_t maxbonuslen = DN_SLOTS_TO_BONUSLEN(dn->dn_num_slots);
ASSERT3U(bonuslen, <=, maxbonuslen);
arc_buf_t *datap = dr->dt.dl.dr_data;
char *datap_end = ((char *)datap) + bonuslen;
char *datap_max = ((char *)datap) + maxbonuslen;
/* ensure that everything is zero after our data */
for (; datap_end < datap_max; datap_end++)
ASSERT(*datap_end == 0);
#endif
}
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
static blkptr_t *
dbuf_lightweight_bp(dbuf_dirty_record_t *dr)
{
/* This must be a lightweight dirty record. */
ASSERT3P(dr->dr_dbuf, ==, NULL);
dnode_t *dn = dr->dr_dnode;
if (dn->dn_phys->dn_nlevels == 1) {
VERIFY3U(dr->dt.dll.dr_blkid, <, dn->dn_phys->dn_nblkptr);
return (&dn->dn_phys->dn_blkptr[dr->dt.dll.dr_blkid]);
} else {
dmu_buf_impl_t *parent_db = dr->dr_parent->dr_dbuf;
int epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
VERIFY3U(parent_db->db_level, ==, 1);
VERIFY3P(parent_db->db_dnode_handle->dnh_dnode, ==, dn);
VERIFY3U(dr->dt.dll.dr_blkid >> epbs, ==, parent_db->db_blkid);
blkptr_t *bp = parent_db->db.db_data;
return (&bp[dr->dt.dll.dr_blkid & ((1 << epbs) - 1)]);
}
}
static void
dbuf_lightweight_ready(zio_t *zio)
{
dbuf_dirty_record_t *dr = zio->io_private;
blkptr_t *bp = zio->io_bp;
if (zio->io_error != 0)
return;
dnode_t *dn = dr->dr_dnode;
blkptr_t *bp_orig = dbuf_lightweight_bp(dr);
spa_t *spa = dmu_objset_spa(dn->dn_objset);
int64_t delta = bp_get_dsize_sync(spa, bp) -
bp_get_dsize_sync(spa, bp_orig);
dnode_diduse_space(dn, delta);
uint64_t blkid = dr->dt.dll.dr_blkid;
mutex_enter(&dn->dn_mtx);
if (blkid > dn->dn_phys->dn_maxblkid) {
ASSERT0(dn->dn_objset->os_raw_receive);
dn->dn_phys->dn_maxblkid = blkid;
}
mutex_exit(&dn->dn_mtx);
if (!BP_IS_EMBEDDED(bp)) {
uint64_t fill = BP_IS_HOLE(bp) ? 0 : 1;
BP_SET_FILL(bp, fill);
}
dmu_buf_impl_t *parent_db;
EQUIV(dr->dr_parent == NULL, dn->dn_phys->dn_nlevels == 1);
if (dr->dr_parent == NULL) {
parent_db = dn->dn_dbuf;
} else {
parent_db = dr->dr_parent->dr_dbuf;
}
rw_enter(&parent_db->db_rwlock, RW_WRITER);
*bp_orig = *bp;
rw_exit(&parent_db->db_rwlock);
}
static void
dbuf_lightweight_physdone(zio_t *zio)
{
dbuf_dirty_record_t *dr = zio->io_private;
dsl_pool_t *dp = spa_get_dsl(zio->io_spa);
ASSERT3U(dr->dr_txg, ==, zio->io_txg);
/*
* The callback will be called io_phys_children times. Retire one
* portion of our dirty space each time we are called. Any rounding
* error will be cleaned up by dbuf_lightweight_done().
*/
int delta = dr->dr_accounted / zio->io_phys_children;
dsl_pool_undirty_space(dp, delta, zio->io_txg);
}
static void
dbuf_lightweight_done(zio_t *zio)
{
dbuf_dirty_record_t *dr = zio->io_private;
VERIFY0(zio->io_error);
objset_t *os = dr->dr_dnode->dn_objset;
dmu_tx_t *tx = os->os_synctx;
if (zio->io_flags & (ZIO_FLAG_IO_REWRITE | ZIO_FLAG_NOPWRITE)) {
ASSERT(BP_EQUAL(zio->io_bp, &zio->io_bp_orig));
} else {
dsl_dataset_t *ds = os->os_dsl_dataset;
(void) dsl_dataset_block_kill(ds, &zio->io_bp_orig, tx, B_TRUE);
dsl_dataset_block_born(ds, zio->io_bp, tx);
}
/*
* See comment in dbuf_write_done().
*/
if (zio->io_phys_children == 0) {
dsl_pool_undirty_space(dmu_objset_pool(os),
dr->dr_accounted, zio->io_txg);
} else {
dsl_pool_undirty_space(dmu_objset_pool(os),
dr->dr_accounted % zio->io_phys_children, zio->io_txg);
}
abd_free(dr->dt.dll.dr_abd);
kmem_free(dr, sizeof (*dr));
}
noinline static void
dbuf_sync_lightweight(dbuf_dirty_record_t *dr, dmu_tx_t *tx)
{
dnode_t *dn = dr->dr_dnode;
zio_t *pio;
if (dn->dn_phys->dn_nlevels == 1) {
pio = dn->dn_zio;
} else {
pio = dr->dr_parent->dr_zio;
}
zbookmark_phys_t zb = {
.zb_objset = dmu_objset_id(dn->dn_objset),
.zb_object = dn->dn_object,
.zb_level = 0,
.zb_blkid = dr->dt.dll.dr_blkid,
};
/*
* See comment in dbuf_write(). This is so that zio->io_bp_orig
* will have the old BP in dbuf_lightweight_done().
*/
dr->dr_bp_copy = *dbuf_lightweight_bp(dr);
dr->dr_zio = zio_write(pio, dmu_objset_spa(dn->dn_objset),
dmu_tx_get_txg(tx), &dr->dr_bp_copy, dr->dt.dll.dr_abd,
dn->dn_datablksz, abd_get_size(dr->dt.dll.dr_abd),
&dr->dt.dll.dr_props, dbuf_lightweight_ready, NULL,
dbuf_lightweight_physdone, dbuf_lightweight_done, dr,
ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_MUSTSUCCEED | dr->dt.dll.dr_flags, &zb);
zio_nowait(dr->dr_zio);
}
/*
* dbuf_sync_leaf() is called recursively from dbuf_sync_list() so it is
* critical the we not allow the compiler to inline this function in to
* dbuf_sync_list() thereby drastically bloating the stack usage.
*/
noinline static void
2008-11-20 23:01:55 +03:00
dbuf_sync_leaf(dbuf_dirty_record_t *dr, dmu_tx_t *tx)
{
arc_buf_t **datap = &dr->dt.dl.dr_data;
dmu_buf_impl_t *db = dr->dr_dbuf;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
objset_t *os;
2008-11-20 23:01:55 +03:00
uint64_t txg = tx->tx_txg;
ASSERT(dmu_tx_is_syncing(tx));
dprintf_dbuf_bp(db, db->db_blkptr, "blkptr=%p", db->db_blkptr);
mutex_enter(&db->db_mtx);
/*
* To be synced, we must be dirtied. But we
* might have been freed after the dirty.
*/
if (db->db_state == DB_UNCACHED) {
/* This buffer has been freed since it was dirtied */
ASSERT(db->db.db_data == NULL);
} else if (db->db_state == DB_FILL) {
/* This buffer was freed and is now being re-filled */
ASSERT(db->db.db_data != dr->dt.dl.dr_data);
} else {
ASSERT(db->db_state == DB_CACHED || db->db_state == DB_NOFILL);
2008-11-20 23:01:55 +03:00
}
DBUF_VERIFY(db);
if (db->db_blkid == DMU_SPILL_BLKID) {
mutex_enter(&dn->dn_mtx);
Fix PANIC: metaslab_free_dva(): bad DVA X:Y:Z The following scenario can result in garbage in the dn_spill field. The db->db_blkptr must be set to NULL when DNODE_FLAG_SPILL_BLKPTR is clear to ensure the dn_spill field is cleared. Current txg = A. * A new spill buffer is created. Its dbuf is initialized with db_blkptr = NULL and it's dirtied. Current txg = B. * The spill buffer is modified. It's marked as dirty in this txg. * Additional changes make the spill buffer unnecessary because the xattr fits into the bonus buffer, so it's removed. The dbuf is undirtied in this txg, but it's still referenced and cannot be destroyed. Current txg = C. * Starts syncing of txg A * dbuf_sync_leaf() is called for the spill buffer. Since db_blkptr is NULL, dbuf_check_blkptr() is called. * The dbuf starts being written and it reaches the ready state (not done yet). * A new change makes the spill buffer necessary again. sa_build_layouts() ends up calling dbuf_find() to locate the dbuf. It finds the old dbuf because it has not been destroyed yet (it will be destroyed when the previous write is done and there are no more references). The old dbuf has db_blkptr != NULL. * txg A write is complete and the dbuf released. However it's still referenced, so it's not destroyed. Current txg = D. * Starts syncing of txg B * dbuf_sync_leaf() is called for the bonus buffer. Its contents are directly copied into the dnode, overwriting the blkptr area because, in txg B, the bonus buffer was big enough to hold the entire xattr. * At this point, the db_blkptr of the spill buffer used in txg C gets corrupted. Signed-off-by: Peng <peng.hse@xtaotech.com> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3937
2016-06-08 10:22:07 +03:00
if (!(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR)) {
/*
* In the previous transaction group, the bonus buffer
* was entirely used to store the attributes for the
* dnode which overrode the dn_spill field. However,
* when adding more attributes to the file a spill
* block was required to hold the extra attributes.
*
* Make sure to clear the garbage left in the dn_spill
* field from the previous attributes in the bonus
* buffer. Otherwise, after writing out the spill
* block to the new allocated dva, it will free
* the old block pointed to by the invalid dn_spill.
*/
db->db_blkptr = NULL;
}
dn->dn_phys->dn_flags |= DNODE_FLAG_SPILL_BLKPTR;
mutex_exit(&dn->dn_mtx);
}
2008-11-20 23:01:55 +03:00
/*
* If this is a bonus buffer, simply copy the bonus data into the
* dnode. It will be written out when the dnode is synced (and it
* will be synced, since it must have been dirty for dbuf_sync to
* be called).
*/
if (db->db_blkid == DMU_BONUS_BLKID) {
ASSERT(dr->dr_dbuf == db);
dbuf_sync_bonus(dr, tx);
2008-11-20 23:01:55 +03:00
return;
}
os = dn->dn_objset;
2008-11-20 23:01:55 +03:00
/*
* This function may have dropped the db_mtx lock allowing a dmu_sync
* operation to sneak in. As a result, we need to ensure that we
* don't check the dr_override_state until we have returned from
* dbuf_check_blkptr.
*/
dbuf_check_blkptr(dn, db);
/*
* If this buffer is in the middle of an immediate write,
2008-11-20 23:01:55 +03:00
* wait for the synchronous IO to complete.
*/
while (dr->dt.dl.dr_override_state == DR_IN_DMU_SYNC) {
ASSERT(dn->dn_object != DMU_META_DNODE_OBJECT);
cv_wait(&db->db_changed, &db->db_mtx);
ASSERT(dr->dt.dl.dr_override_state != DR_NOT_OVERRIDDEN);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* If this is a dnode block, ensure it is appropriately encrypted
* or decrypted, depending on what we are writing to it this txg.
*/
if (os->os_encrypted && dn->dn_object == DMU_META_DNODE_OBJECT)
dbuf_prepare_encrypted_dnode_leaf(dr);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
2009-07-03 02:44:48 +04:00
if (db->db_state != DB_NOFILL &&
dn->dn_object != DMU_META_DNODE_OBJECT &&
zfs_refcount_count(&db->db_holds) > 1 &&
dr->dt.dl.dr_override_state != DR_OVERRIDDEN &&
2009-07-03 02:44:48 +04:00
*datap == db->db_buf) {
/*
* If this buffer is currently "in use" (i.e., there
* are active holds and db_data still references it),
* then make a copy before we start the write so that
* any modifications from the open txg will not leak
* into this write.
*
* NOTE: this copy does not need to be made for
* objects only modified in the syncing context (e.g.
* DNONE_DNODE blocks).
*/
int psize = arc_buf_size(*datap);
int lsize = arc_buf_lsize(*datap);
arc_buf_contents_t type = DBUF_GET_BUFC_TYPE(db);
enum zio_compress compress_type = arc_get_compression(*datap);
uint8_t complevel = arc_get_complevel(*datap);
if (arc_is_encrypted(*datap)) {
boolean_t byteorder;
uint8_t salt[ZIO_DATA_SALT_LEN];
uint8_t iv[ZIO_DATA_IV_LEN];
uint8_t mac[ZIO_DATA_MAC_LEN];
arc_get_raw_params(*datap, &byteorder, salt, iv, mac);
*datap = arc_alloc_raw_buf(os->os_spa, db,
dmu_objset_id(os), byteorder, salt, iv, mac,
dn->dn_type, psize, lsize, compress_type,
complevel);
} else if (compress_type != ZIO_COMPRESS_OFF) {
ASSERT3U(type, ==, ARC_BUFC_DATA);
*datap = arc_alloc_compressed_buf(os->os_spa, db,
psize, lsize, compress_type, complevel);
} else {
*datap = arc_alloc_buf(os->os_spa, db, type, psize);
}
bcopy(db->db.db_data, (*datap)->b_data, psize);
}
2008-11-20 23:01:55 +03:00
db->db_data_pending = dr;
mutex_exit(&db->db_mtx);
dbuf_write(dr, *datap, tx);
2008-11-20 23:01:55 +03:00
ASSERT(!list_link_active(&dr->dr_dirty_node));
if (dn->dn_object == DMU_META_DNODE_OBJECT) {
list_insert_tail(&dn->dn_dirty_records[txg & TXG_MASK], dr);
} else {
2008-11-20 23:01:55 +03:00
zio_nowait(dr->dr_zio);
}
2008-11-20 23:01:55 +03:00
}
void
dbuf_sync_list(list_t *list, int level, dmu_tx_t *tx)
2008-11-20 23:01:55 +03:00
{
dbuf_dirty_record_t *dr;
while ((dr = list_head(list))) {
2008-11-20 23:01:55 +03:00
if (dr->dr_zio != NULL) {
/*
* If we find an already initialized zio then we
* are processing the meta-dnode, and we have finished.
* The dbufs for all dnodes are put back on the list
* during processing, so that we can zio_wait()
* these IOs after initiating all child IOs.
*/
ASSERT3U(dr->dr_dbuf->db.db_object, ==,
DMU_META_DNODE_OBJECT);
break;
}
list_remove(list, dr);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
if (dr->dr_dbuf == NULL) {
dbuf_sync_lightweight(dr, tx);
} else {
if (dr->dr_dbuf->db_blkid != DMU_BONUS_BLKID &&
dr->dr_dbuf->db_blkid != DMU_SPILL_BLKID) {
VERIFY3U(dr->dr_dbuf->db_level, ==, level);
}
if (dr->dr_dbuf->db_level > 0)
dbuf_sync_indirect(dr, tx);
else
dbuf_sync_leaf(dr, tx);
}
2008-11-20 23:01:55 +03:00
}
}
/* ARGSUSED */
static void
dbuf_write_ready(zio_t *zio, arc_buf_t *buf, void *vdb)
{
dmu_buf_impl_t *db = vdb;
dnode_t *dn;
blkptr_t *bp = zio->io_bp;
2008-11-20 23:01:55 +03:00
blkptr_t *bp_orig = &zio->io_bp_orig;
spa_t *spa = zio->io_spa;
int64_t delta;
2008-11-20 23:01:55 +03:00
uint64_t fill = 0;
int i;
2008-11-20 23:01:55 +03:00
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
ASSERT3P(db->db_blkptr, !=, NULL);
ASSERT3P(&db->db_data_pending->dr_bp_copy, ==, bp);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
delta = bp_get_dsize_sync(spa, bp) - bp_get_dsize_sync(spa, bp_orig);
dnode_diduse_space(dn, delta - zio->io_prev_space_delta);
zio->io_prev_space_delta = delta;
2008-11-20 23:01:55 +03:00
if (bp->blk_birth != 0) {
ASSERT((db->db_blkid != DMU_SPILL_BLKID &&
BP_GET_TYPE(bp) == dn->dn_type) ||
(db->db_blkid == DMU_SPILL_BLKID &&
BP_GET_TYPE(bp) == dn->dn_bonustype) ||
BP_IS_EMBEDDED(bp));
ASSERT(BP_GET_LEVEL(bp) == db->db_level);
2008-11-20 23:01:55 +03:00
}
mutex_enter(&db->db_mtx);
#ifdef ZFS_DEBUG
if (db->db_blkid == DMU_SPILL_BLKID) {
ASSERT(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR);
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
ASSERT(!(BP_IS_HOLE(bp)) &&
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
db->db_blkptr == DN_SPILL_BLKPTR(dn->dn_phys));
}
#endif
2008-11-20 23:01:55 +03:00
if (db->db_level == 0) {
mutex_enter(&dn->dn_mtx);
if (db->db_blkid > dn->dn_phys->dn_maxblkid &&
db->db_blkid != DMU_SPILL_BLKID) {
ASSERT0(db->db_objset->os_raw_receive);
2008-11-20 23:01:55 +03:00
dn->dn_phys->dn_maxblkid = db->db_blkid;
}
2008-11-20 23:01:55 +03:00
mutex_exit(&dn->dn_mtx);
if (dn->dn_type == DMU_OT_DNODE) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
i = 0;
while (i < db->db.db_size) {
dnode_phys_t *dnp =
(void *)(((char *)db->db.db_data) + i);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
i += DNODE_MIN_SIZE;
if (dnp->dn_type != DMU_OT_NONE) {
2008-11-20 23:01:55 +03:00
fill++;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
i += dnp->dn_extra_slots *
DNODE_MIN_SIZE;
}
2008-11-20 23:01:55 +03:00
}
} else {
if (BP_IS_HOLE(bp)) {
fill = 0;
} else {
fill = 1;
}
2008-11-20 23:01:55 +03:00
}
} else {
blkptr_t *ibp = db->db.db_data;
2008-11-20 23:01:55 +03:00
ASSERT3U(db->db.db_size, ==, 1<<dn->dn_phys->dn_indblkshift);
for (i = db->db.db_size >> SPA_BLKPTRSHIFT; i > 0; i--, ibp++) {
if (BP_IS_HOLE(ibp))
2008-11-20 23:01:55 +03:00
continue;
fill += BP_GET_FILL(ibp);
2008-11-20 23:01:55 +03:00
}
}
DB_DNODE_EXIT(db);
2008-11-20 23:01:55 +03:00
if (!BP_IS_EMBEDDED(bp))
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
BP_SET_FILL(bp, fill);
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
db_lock_type_t dblt = dmu_buf_lock_parent(db, RW_WRITER, FTAG);
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
*db->db_blkptr = *bp;
dmu_buf_unlock_parent(db, dblt, FTAG);
2008-11-20 23:01:55 +03:00
}
/* ARGSUSED */
/*
* This function gets called just prior to running through the compression
* stage of the zio pipeline. If we're an indirect block comprised of only
* holes, then we want this indirect to be compressed away to a hole. In
* order to do that we must zero out any information about the holes that
* this indirect points to prior to before we try to compress it.
*/
static void
dbuf_write_children_ready(zio_t *zio, arc_buf_t *buf, void *vdb)
{
dmu_buf_impl_t *db = vdb;
dnode_t *dn;
blkptr_t *bp;
unsigned int epbs, i;
ASSERT3U(db->db_level, >, 0);
DB_DNODE_ENTER(db);
dn = DB_DNODE(db);
epbs = dn->dn_phys->dn_indblkshift - SPA_BLKPTRSHIFT;
ASSERT3U(epbs, <, 31);
/* Determine if all our children are holes */
for (i = 0, bp = db->db.db_data; i < 1ULL << epbs; i++, bp++) {
if (!BP_IS_HOLE(bp))
break;
}
/*
* If all the children are holes, then zero them all out so that
* we may get compressed away.
*/
if (i == 1ULL << epbs) {
/*
* We only found holes. Grab the rwlock to prevent
* anybody from reading the blocks we're about to
* zero out.
*/
rw_enter(&db->db_rwlock, RW_WRITER);
bzero(db->db.db_data, db->db.db_size);
rw_exit(&db->db_rwlock);
}
DB_DNODE_EXIT(db);
}
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
/*
* The SPA will call this callback several times for each zio - once
* for every physical child i/o (zio->io_phys_children times). This
* allows the DMU to monitor the progress of each logical i/o. For example,
* there may be 2 copies of an indirect block, or many fragments of a RAID-Z
* block. There may be a long delay before all copies/fragments are completed,
* so this callback allows us to retire dirty space gradually, as the physical
* i/os complete.
*/
/* ARGSUSED */
static void
dbuf_write_physdone(zio_t *zio, arc_buf_t *buf, void *arg)
{
dmu_buf_impl_t *db = arg;
objset_t *os = db->db_objset;
dsl_pool_t *dp = dmu_objset_pool(os);
dbuf_dirty_record_t *dr;
int delta = 0;
dr = db->db_data_pending;
ASSERT3U(dr->dr_txg, ==, zio->io_txg);
/*
* The callback will be called io_phys_children times. Retire one
* portion of our dirty space each time we are called. Any rounding
dmu_tx_wait() hang likely due to cv_signal() in dsl_pool_dirty_delta() Even though the bug's writeup (Github issue #9136) is very detailed, we still don't know exactly how we got to that state, thus I wasn't able to reproduce the bug. That said, we can make an educated guess combining the information on filled issue with the code. From the fact that `dp_dirty_total` was 0 (which is less than `zfs_dirty_data_max`) we know that there was one thread that set it to 0 and then signaled one of the waiters of `dp_spaceavail_cv` [see `dsl_pool_dirty_delta()` which is also the only place that `dp_dirty_total` is changed]. Thus, the only logical explaination then for the bug being hit is that the waiter that just got awaken didn't go through `dsl_pool_dirty_data()`. Given that this function is only called by `dsl_pool_dirty_space()` or `dsl_pool_undirty_space()` I can only think of two possible ways of the above scenario happening: [1] The waiter didn't call into any of the two functions - which I find highly unlikely (i.e. why wait on `dp_spaceavail_cv` to begin with?). [2] The waiter did call in one of the above function but it passed 0 as the space/delta to be dirtied (or undirtied) and then the callee returned immediately (e.g both `dsl_pool_dirty_space()` and `dsl_pool_undirty_space()` return immediately when space is 0). In any case and no matter how we got there, the easy fix would be to just broadcast to all waiters whenever `dp_dirty_total` hits 0. That said and given that we've never hit this before, it would make sense to think more on why the above situation occured. Attempting to mimic what Prakash was doing in the issue filed, I created a dataset with `sync=always` and started doing contiguous writes in a file within that dataset. I observed with DTrace that even though we update the pool's dirty data accounting when we would dirty stuff, the accounting wouldn't be decremented incrementally as we were done with the ZIOs of those writes (the reason being that `dbuf_write_physdone()` isn't be called as we go through the override code paths, and thus `dsl_pool_undirty_space()` is never called). As a result we'd have to wait until we get to `dsl_pool_sync()` where we zero out all dirty data accounting for the pool and the current TXG's metadata. In addition, as Matt noted and I later verified, the same issue would arise when using dedup. In both cases (sync & dedup) we shouldn't have to wait until `dsl_pool_sync()` zeros out the accounting data. According to the comment in that part of the code, the reasons why we do the zeroing, have nothing to do with what we observe: ```` /* * We have written all of the accounted dirty data, so our * dp_space_towrite should now be zero. However, some seldom-used * code paths do not adhere to this (e.g. dbuf_undirty(), also * rounding error in dbuf_write_physdone). * Shore up the accounting of any dirtied space now. */ dsl_pool_undirty_space(dp, dp->dp_dirty_pertxg[txg & TXG_MASK], txg); ```` Ideally what we want to do is to undirty in the accounting exactly what we dirty (I use the word ideally as we can still have rounding errors). This would make the behavior of the system more clear and predictable. Another interesting issue that I observed with DTrace was that we wouldn't update any of the pool's dirty data accounting whenever we would dirty and/or undirty MOS data. In addition, every time we would change the size of a dbuf through `dbuf_new_size()` we wouldn't update the accounted space dirtied in the appropriate dirty record, so when ZIOs are done we would undirty less that we dirtied from the pool's accounting point of view. For the first two issues observed (sync & dedup) this patch ensures that we still update the pool's accounting when we undirty data, regardless of the write being physical or not. For changes in the MOS, we first ensure to zero out the pool's dirty data accounting in `dsl_pool_sync()` after we synced the MOS. Then we can go ahead and enable the update of the pool's dirty data accounting wheneve we change MOS data. Another fix is that we now update the accounting explicitly for counting errors in `dbuf_write_done()`. Finally, `dbuf_new_size()` updates the accounted space of the appropriate dirty record correctly now. The problem is that we still don't know how the bug came up in the issue filled. That said the issues fixed seem to be very relevant, so instead of going with the broadcasting solution right away, I decided to leave this patch as is. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> External-issue: DLPX-47285 Closes #9137
2019-08-16 02:53:53 +03:00
* error will be cleaned up by dbuf_write_done().
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
*/
delta = dr->dr_accounted / zio->io_phys_children;
dsl_pool_undirty_space(dp, delta, zio->io_txg);
}
2008-11-20 23:01:55 +03:00
/* ARGSUSED */
static void
dbuf_write_done(zio_t *zio, arc_buf_t *buf, void *vdb)
{
dmu_buf_impl_t *db = vdb;
blkptr_t *bp_orig = &zio->io_bp_orig;
blkptr_t *bp = db->db_blkptr;
objset_t *os = db->db_objset;
dmu_tx_t *tx = os->os_synctx;
2008-11-20 23:01:55 +03:00
ASSERT0(zio->io_error);
ASSERT(db->db_blkptr == bp);
/*
* For nopwrites and rewrites we ensure that the bp matches our
* original and bypass all the accounting.
*/
if (zio->io_flags & (ZIO_FLAG_IO_REWRITE | ZIO_FLAG_NOPWRITE)) {
ASSERT(BP_EQUAL(bp, bp_orig));
} else {
dsl_dataset_t *ds = os->os_dsl_dataset;
(void) dsl_dataset_block_kill(ds, bp_orig, tx, B_TRUE);
dsl_dataset_block_born(ds, bp, tx);
}
2008-11-20 23:01:55 +03:00
mutex_enter(&db->db_mtx);
DBUF_VERIFY(db);
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dbuf_dirty_record_t *dr = db->db_data_pending;
dnode_t *dn = dr->dr_dnode;
2008-11-20 23:01:55 +03:00
ASSERT(!list_link_active(&dr->dr_dirty_node));
ASSERT(dr->dr_dbuf == db);
ASSERT(list_next(&db->db_dirty_records, dr) == NULL);
list_remove(&db->db_dirty_records, dr);
2008-11-20 23:01:55 +03:00
#ifdef ZFS_DEBUG
if (db->db_blkid == DMU_SPILL_BLKID) {
ASSERT(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR);
ASSERT(!(BP_IS_HOLE(db->db_blkptr)) &&
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
db->db_blkptr == DN_SPILL_BLKPTR(dn->dn_phys));
}
#endif
2008-11-20 23:01:55 +03:00
if (db->db_level == 0) {
ASSERT(db->db_blkid != DMU_BONUS_BLKID);
2008-11-20 23:01:55 +03:00
ASSERT(dr->dt.dl.dr_override_state == DR_NOT_OVERRIDDEN);
if (db->db_state != DB_NOFILL) {
if (dr->dt.dl.dr_data != db->db_buf)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(dr->dt.dl.dr_data, db);
}
2008-11-20 23:01:55 +03:00
} else {
ASSERT(list_head(&dr->dt.di.dr_children) == NULL);
ASSERT3U(db->db.db_size, ==, 1 << dn->dn_phys->dn_indblkshift);
2008-11-20 23:01:55 +03:00
if (!BP_IS_HOLE(db->db_blkptr)) {
int epbs __maybe_unused = dn->dn_phys->dn_indblkshift -
SPA_BLKPTRSHIFT;
ASSERT3U(db->db_blkid, <=,
dn->dn_phys->dn_maxblkid >> (db->db_level * epbs));
2008-11-20 23:01:55 +03:00
ASSERT3U(BP_GET_LSIZE(db->db_blkptr), ==,
db->db.db_size);
}
mutex_destroy(&dr->dt.di.dr_mtx);
list_destroy(&dr->dt.di.dr_children);
}
cv_broadcast(&db->db_changed);
ASSERT(db->db_dirtycnt > 0);
db->db_dirtycnt -= 1;
db->db_data_pending = NULL;
dbuf_rele_and_unlock(db, (void *)(uintptr_t)tx->tx_txg, B_FALSE);
dmu_tx_wait() hang likely due to cv_signal() in dsl_pool_dirty_delta() Even though the bug's writeup (Github issue #9136) is very detailed, we still don't know exactly how we got to that state, thus I wasn't able to reproduce the bug. That said, we can make an educated guess combining the information on filled issue with the code. From the fact that `dp_dirty_total` was 0 (which is less than `zfs_dirty_data_max`) we know that there was one thread that set it to 0 and then signaled one of the waiters of `dp_spaceavail_cv` [see `dsl_pool_dirty_delta()` which is also the only place that `dp_dirty_total` is changed]. Thus, the only logical explaination then for the bug being hit is that the waiter that just got awaken didn't go through `dsl_pool_dirty_data()`. Given that this function is only called by `dsl_pool_dirty_space()` or `dsl_pool_undirty_space()` I can only think of two possible ways of the above scenario happening: [1] The waiter didn't call into any of the two functions - which I find highly unlikely (i.e. why wait on `dp_spaceavail_cv` to begin with?). [2] The waiter did call in one of the above function but it passed 0 as the space/delta to be dirtied (or undirtied) and then the callee returned immediately (e.g both `dsl_pool_dirty_space()` and `dsl_pool_undirty_space()` return immediately when space is 0). In any case and no matter how we got there, the easy fix would be to just broadcast to all waiters whenever `dp_dirty_total` hits 0. That said and given that we've never hit this before, it would make sense to think more on why the above situation occured. Attempting to mimic what Prakash was doing in the issue filed, I created a dataset with `sync=always` and started doing contiguous writes in a file within that dataset. I observed with DTrace that even though we update the pool's dirty data accounting when we would dirty stuff, the accounting wouldn't be decremented incrementally as we were done with the ZIOs of those writes (the reason being that `dbuf_write_physdone()` isn't be called as we go through the override code paths, and thus `dsl_pool_undirty_space()` is never called). As a result we'd have to wait until we get to `dsl_pool_sync()` where we zero out all dirty data accounting for the pool and the current TXG's metadata. In addition, as Matt noted and I later verified, the same issue would arise when using dedup. In both cases (sync & dedup) we shouldn't have to wait until `dsl_pool_sync()` zeros out the accounting data. According to the comment in that part of the code, the reasons why we do the zeroing, have nothing to do with what we observe: ```` /* * We have written all of the accounted dirty data, so our * dp_space_towrite should now be zero. However, some seldom-used * code paths do not adhere to this (e.g. dbuf_undirty(), also * rounding error in dbuf_write_physdone). * Shore up the accounting of any dirtied space now. */ dsl_pool_undirty_space(dp, dp->dp_dirty_pertxg[txg & TXG_MASK], txg); ```` Ideally what we want to do is to undirty in the accounting exactly what we dirty (I use the word ideally as we can still have rounding errors). This would make the behavior of the system more clear and predictable. Another interesting issue that I observed with DTrace was that we wouldn't update any of the pool's dirty data accounting whenever we would dirty and/or undirty MOS data. In addition, every time we would change the size of a dbuf through `dbuf_new_size()` we wouldn't update the accounted space dirtied in the appropriate dirty record, so when ZIOs are done we would undirty less that we dirtied from the pool's accounting point of view. For the first two issues observed (sync & dedup) this patch ensures that we still update the pool's accounting when we undirty data, regardless of the write being physical or not. For changes in the MOS, we first ensure to zero out the pool's dirty data accounting in `dsl_pool_sync()` after we synced the MOS. Then we can go ahead and enable the update of the pool's dirty data accounting wheneve we change MOS data. Another fix is that we now update the accounting explicitly for counting errors in `dbuf_write_done()`. Finally, `dbuf_new_size()` updates the accounted space of the appropriate dirty record correctly now. The problem is that we still don't know how the bug came up in the issue filled. That said the issues fixed seem to be very relevant, so instead of going with the broadcasting solution right away, I decided to leave this patch as is. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> External-issue: DLPX-47285 Closes #9137
2019-08-16 02:53:53 +03:00
/*
* If we didn't do a physical write in this ZIO and we
* still ended up here, it means that the space of the
* dbuf that we just released (and undirtied) above hasn't
* been marked as undirtied in the pool's accounting.
*
* Thus, we undirty that space in the pool's view of the
* world here. For physical writes this type of update
* happens in dbuf_write_physdone().
*
* If we did a physical write, cleanup any rounding errors
* that came up due to writing multiple copies of a block
* on disk [see dbuf_write_physdone()].
*/
if (zio->io_phys_children == 0) {
dsl_pool_undirty_space(dmu_objset_pool(os),
dr->dr_accounted, zio->io_txg);
} else {
dsl_pool_undirty_space(dmu_objset_pool(os),
dr->dr_accounted % zio->io_phys_children, zio->io_txg);
}
kmem_free(dr, sizeof (dbuf_dirty_record_t));
}
static void
dbuf_write_nofill_ready(zio_t *zio)
{
dbuf_write_ready(zio, NULL, zio->io_private);
}
static void
dbuf_write_nofill_done(zio_t *zio)
{
dbuf_write_done(zio, NULL, zio->io_private);
}
static void
dbuf_write_override_ready(zio_t *zio)
{
dbuf_dirty_record_t *dr = zio->io_private;
dmu_buf_impl_t *db = dr->dr_dbuf;
dbuf_write_ready(zio, NULL, db);
}
static void
dbuf_write_override_done(zio_t *zio)
{
dbuf_dirty_record_t *dr = zio->io_private;
dmu_buf_impl_t *db = dr->dr_dbuf;
blkptr_t *obp = &dr->dt.dl.dr_overridden_by;
mutex_enter(&db->db_mtx);
if (!BP_EQUAL(zio->io_bp, obp)) {
if (!BP_IS_HOLE(obp))
dsl_free(spa_get_dsl(zio->io_spa), zio->io_txg, obp);
arc_release(dr->dt.dl.dr_data, db);
}
2008-11-20 23:01:55 +03:00
mutex_exit(&db->db_mtx);
dbuf_write_done(zio, NULL, db);
if (zio->io_abd != NULL)
abd_free(zio->io_abd);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
typedef struct dbuf_remap_impl_callback_arg {
objset_t *drica_os;
uint64_t drica_blk_birth;
dmu_tx_t *drica_tx;
} dbuf_remap_impl_callback_arg_t;
static void
dbuf_remap_impl_callback(uint64_t vdev, uint64_t offset, uint64_t size,
void *arg)
{
dbuf_remap_impl_callback_arg_t *drica = arg;
objset_t *os = drica->drica_os;
spa_t *spa = dmu_objset_spa(os);
dmu_tx_t *tx = drica->drica_tx;
ASSERT(dsl_pool_sync_context(spa_get_dsl(spa)));
if (os == spa_meta_objset(spa)) {
spa_vdev_indirect_mark_obsolete(spa, vdev, offset, size, tx);
} else {
dsl_dataset_block_remapped(dmu_objset_ds(os), vdev, offset,
size, drica->drica_blk_birth, tx);
}
}
static void
dbuf_remap_impl(dnode_t *dn, blkptr_t *bp, krwlock_t *rw, dmu_tx_t *tx)
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
{
blkptr_t bp_copy = *bp;
spa_t *spa = dmu_objset_spa(dn->dn_objset);
dbuf_remap_impl_callback_arg_t drica;
ASSERT(dsl_pool_sync_context(spa_get_dsl(spa)));
drica.drica_os = dn->dn_objset;
drica.drica_blk_birth = bp->blk_birth;
drica.drica_tx = tx;
if (spa_remap_blkptr(spa, &bp_copy, dbuf_remap_impl_callback,
&drica)) {
/*
* If the blkptr being remapped is tracked by a livelist,
* then we need to make sure the livelist reflects the update.
* First, cancel out the old blkptr by appending a 'FREE'
* entry. Next, add an 'ALLOC' to track the new version. This
* way we avoid trying to free an inaccurate blkptr at delete.
* Note that embedded blkptrs are not tracked in livelists.
*/
if (dn->dn_objset != spa_meta_objset(spa)) {
dsl_dataset_t *ds = dmu_objset_ds(dn->dn_objset);
if (dsl_deadlist_is_open(&ds->ds_dir->dd_livelist) &&
bp->blk_birth > ds->ds_dir->dd_origin_txg) {
ASSERT(!BP_IS_EMBEDDED(bp));
ASSERT(dsl_dir_is_clone(ds->ds_dir));
ASSERT(spa_feature_is_enabled(spa,
SPA_FEATURE_LIVELIST));
bplist_append(&ds->ds_dir->dd_pending_frees,
bp);
bplist_append(&ds->ds_dir->dd_pending_allocs,
&bp_copy);
}
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
/*
* The db_rwlock prevents dbuf_read_impl() from
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
* dereferencing the BP while we are changing it. To
* avoid lock contention, only grab it when we are actually
* changing the BP.
*/
if (rw != NULL)
rw_enter(rw, RW_WRITER);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
*bp = bp_copy;
if (rw != NULL)
rw_exit(rw);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
}
/*
* Remap any existing BP's to concrete vdevs, if possible.
*/
static void
dbuf_remap(dnode_t *dn, dmu_buf_impl_t *db, dmu_tx_t *tx)
{
spa_t *spa = dmu_objset_spa(db->db_objset);
ASSERT(dsl_pool_sync_context(spa_get_dsl(spa)));
if (!spa_feature_is_active(spa, SPA_FEATURE_DEVICE_REMOVAL))
return;
if (db->db_level > 0) {
blkptr_t *bp = db->db.db_data;
for (int i = 0; i < db->db.db_size >> SPA_BLKPTRSHIFT; i++) {
dbuf_remap_impl(dn, &bp[i], &db->db_rwlock, tx);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
} else if (db->db.db_object == DMU_META_DNODE_OBJECT) {
dnode_phys_t *dnp = db->db.db_data;
ASSERT3U(db->db_dnode_handle->dnh_dnode->dn_type, ==,
DMU_OT_DNODE);
for (int i = 0; i < db->db.db_size >> DNODE_SHIFT;
i += dnp[i].dn_extra_slots + 1) {
for (int j = 0; j < dnp[i].dn_nblkptr; j++) {
krwlock_t *lock = (dn->dn_dbuf == NULL ? NULL :
&dn->dn_dbuf->db_rwlock);
dbuf_remap_impl(dn, &dnp[i].dn_blkptr[j], lock,
tx);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
}
}
}
/* Issue I/O to commit a dirty buffer to disk. */
static void
dbuf_write(dbuf_dirty_record_t *dr, arc_buf_t *data, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = dr->dr_dbuf;
Improve zfs receive performance with lightweight write The performance of `zfs receive` can be bottlenecked on the CPU consumed by the `receive_writer` thread, especially when receiving streams with small compressed block sizes. Much of the CPU is spent creating and destroying dbuf's and arc buf's, one for each `WRITE` record in the send stream. This commit introduces the concept of "lightweight writes", which allows `zfs receive` to write to the DMU by providing an ABD, and instantiating only a new type of `dbuf_dirty_record_t`. The dbuf and arc buf for this "dirty leaf block" are not instantiated. Because there is no dbuf with the dirty data, this mechanism doesn't support reading from "lightweight-dirty" blocks (they would see the on-disk state rather than the dirty data). Since the dedup-receive code has been removed, `zfs receive` is write-only, so this works fine. Because there are no arc bufs for the received data, the received data is no longer cached in the ARC. Testing a receive of a stream with average compressed block size of 4KB, this commit improves performance by 50%, while also reducing CPU usage by 50% of a CPU. On a per-block basis, CPU consumed by receive_writer() and dbuf_evict() is now 1/7th (14%) of what it was. Baseline: 450MB/s, CPU in receive_writer() 40% + dbuf_evict() 35% New: 670MB/s, CPU in receive_writer() 17% + dbuf_evict() 0% The code is also restructured in a few ways: Added a `dr_dnode` field to the dbuf_dirty_record_t. This simplifies some existing code that no longer needs `DB_DNODE_ENTER()` and related routines. The new field is needed by the lightweight-type dirty record. To ensure that the `dr_dnode` field remains valid until the dirty record is freed, we have to ensure that the `dnode_move()` doesn't relocate the dnode_t. To do this we keep a hold on the dnode until it's zio's have completed. This is already done by the user-accounting code (`userquota_updates_task()`), this commit extends that so that it always keeps the dnode hold until zio completion (see `dnode_rele_task()`). `dn_dirty_txg` was previously zeroed when the dnode was synced. This was not necessary, since its meaning can be "when was this dnode last dirtied". This change simplifies the new `dnode_rele_task()` code. Removed some dead code related to `DRR_WRITE_BYREF` (dedup receive). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11105
2020-12-11 21:26:02 +03:00
dnode_t *dn = dr->dr_dnode;
objset_t *os;
dmu_buf_impl_t *parent = db->db_parent;
uint64_t txg = tx->tx_txg;
zbookmark_phys_t zb;
zio_prop_t zp;
zio_t *pio; /* parent I/O */
int wp_flag = 0;
2008-11-20 23:01:55 +03:00
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
ASSERT(dmu_tx_is_syncing(tx));
os = dn->dn_objset;
if (db->db_state != DB_NOFILL) {
if (db->db_level > 0 || dn->dn_type == DMU_OT_DNODE) {
/*
* Private object buffers are released here rather
* than in dbuf_dirty() since they are only modified
* in the syncing context and we don't want the
* overhead of making multiple copies of the data.
*/
if (BP_IS_HOLE(db->db_blkptr)) {
arc_buf_thaw(data);
} else {
dbuf_release_bp(db);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
dbuf_remap(dn, db, tx);
}
}
if (parent != dn->dn_dbuf) {
/* Our parent is an indirect block. */
/* We have a dirty parent that has been scheduled for write. */
ASSERT(parent && parent->db_data_pending);
/* Our parent's buffer is one level closer to the dnode. */
ASSERT(db->db_level == parent->db_level-1);
/*
* We're about to modify our parent's db_data by modifying
* our block pointer, so the parent must be released.
*/
ASSERT(arc_released(parent->db_buf));
pio = parent->db_data_pending->dr_zio;
} else {
/* Our parent is the dnode itself. */
ASSERT((db->db_level == dn->dn_phys->dn_nlevels-1 &&
db->db_blkid != DMU_SPILL_BLKID) ||
(db->db_blkid == DMU_SPILL_BLKID && db->db_level == 0));
if (db->db_blkid != DMU_SPILL_BLKID)
ASSERT3P(db->db_blkptr, ==,
&dn->dn_phys->dn_blkptr[db->db_blkid]);
pio = dn->dn_zio;
}
ASSERT(db->db_level == 0 || data == db->db_buf);
ASSERT3U(db->db_blkptr->blk_birth, <=, txg);
ASSERT(pio);
SET_BOOKMARK(&zb, os->os_dsl_dataset ?
os->os_dsl_dataset->ds_object : DMU_META_OBJSET,
db->db.db_object, db->db_level, db->db_blkid);
if (db->db_blkid == DMU_SPILL_BLKID)
wp_flag = WP_SPILL;
wp_flag |= (db->db_state == DB_NOFILL) ? WP_NOFILL : 0;
dmu_write_policy(os, dn, db->db_level, wp_flag, &zp);
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
/*
* We copy the blkptr now (rather than when we instantiate the dirty
* record), because its value can change between open context and
* syncing context. We do not need to hold dn_struct_rwlock to read
* db_blkptr because we are in syncing context.
*/
dr->dr_bp_copy = *db->db_blkptr;
if (db->db_level == 0 &&
dr->dt.dl.dr_override_state == DR_OVERRIDDEN) {
/*
* The BP for this block has been provided by open context
* (by dmu_sync() or dmu_buf_write_embedded()).
*/
abd_t *contents = (data != NULL) ?
abd_get_from_buf(data->b_data, arc_buf_size(data)) : NULL;
dr->dr_zio = zio_write(pio, os->os_spa, txg, &dr->dr_bp_copy,
contents, db->db.db_size, db->db.db_size, &zp,
dbuf_write_override_ready, NULL, NULL,
dbuf_write_override_done,
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 07:01:20 +04:00
dr, ZIO_PRIORITY_ASYNC_WRITE, ZIO_FLAG_MUSTSUCCEED, &zb);
mutex_enter(&db->db_mtx);
dr->dt.dl.dr_override_state = DR_NOT_OVERRIDDEN;
zio_write_override(dr->dr_zio, &dr->dt.dl.dr_overridden_by,
dr->dt.dl.dr_copies, dr->dt.dl.dr_nopwrite);
mutex_exit(&db->db_mtx);
} else if (db->db_state == DB_NOFILL) {
OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> Ported by: Tony Hutter <hutter2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
2016-06-16 01:47:05 +03:00
ASSERT(zp.zp_checksum == ZIO_CHECKSUM_OFF ||
zp.zp_checksum == ZIO_CHECKSUM_NOPARITY);
dr->dr_zio = zio_write(pio, os->os_spa, txg,
&dr->dr_bp_copy, NULL, db->db.db_size, db->db.db_size, &zp,
dbuf_write_nofill_ready, NULL, NULL,
dbuf_write_nofill_done, db,
ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_MUSTSUCCEED | ZIO_FLAG_NODATA, &zb);
} else {
ASSERT(arc_released(data));
/*
* For indirect blocks, we want to setup the children
* ready callback so that we can properly handle an indirect
* block that only contains holes.
*/
arc_write_done_func_t *children_ready_cb = NULL;
if (db->db_level != 0)
children_ready_cb = dbuf_write_children_ready;
dr->dr_zio = arc_write(pio, os->os_spa, txg,
Illumos 6844 - dnode_next_offset can detect fictional holes 6844 dnode_next_offset can detect fictional holes Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> dnode_next_offset is used in a variety of places to iterate over the holes or allocated blocks in a dnode. It operates under the premise that it can iterate over the blockpointers of a dnode in open context while holding only the dn_struct_rwlock as reader. Unfortunately, this premise does not hold. When we create the zio for a dbuf, we pass in the actual block pointer in the indirect block above that dbuf. When we later zero the bp in zio_write_compress, we are directly modifying the bp. The state of the bp is now inconsistent from the perspective of dnode_next_offset: the bp will appear to be a hole until zio_dva_allocate finally finishes filling it in. In the meantime, dnode_next_offset can detect a hole in the dnode when none exists. I was able to experimentally demonstrate this behavior with the following setup: 1. Create a file with 1 million dbufs. 2. Create a thread that randomly dirties L2 blocks by writing to the first L0 block under them. 3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle of a file. 4. Do dnode_next_offset in a loop until we skip over such a non-existent hole. The fix is to ensure that it is valid to iterate over the indirect blocks in a dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP and updating the actual BP in dbuf_write_ready while holding the lock. References: https://www.illumos.org/issues/6844 https://github.com/openzfs/openzfs/pull/82 DLPX-35372 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4548
2016-04-21 21:23:37 +03:00
&dr->dr_bp_copy, data, DBUF_IS_L2CACHEABLE(db),
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
&zp, dbuf_write_ready,
children_ready_cb, dbuf_write_physdone,
dbuf_write_done, db, ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_MUSTSUCCEED, &zb);
}
2008-11-20 23:01:55 +03:00
}
EXPORT_SYMBOL(dbuf_find);
EXPORT_SYMBOL(dbuf_is_metadata);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
EXPORT_SYMBOL(dbuf_destroy);
EXPORT_SYMBOL(dbuf_loan_arcbuf);
EXPORT_SYMBOL(dbuf_whichblock);
EXPORT_SYMBOL(dbuf_read);
EXPORT_SYMBOL(dbuf_unoverride);
EXPORT_SYMBOL(dbuf_free_range);
EXPORT_SYMBOL(dbuf_new_size);
EXPORT_SYMBOL(dbuf_release_bp);
EXPORT_SYMBOL(dbuf_dirty);
EXPORT_SYMBOL(dmu_buf_set_crypt_params);
EXPORT_SYMBOL(dmu_buf_will_dirty);
EXPORT_SYMBOL(dmu_buf_is_dirty);
EXPORT_SYMBOL(dmu_buf_will_not_fill);
EXPORT_SYMBOL(dmu_buf_will_fill);
EXPORT_SYMBOL(dmu_buf_fill_done);
EXPORT_SYMBOL(dmu_buf_rele);
EXPORT_SYMBOL(dbuf_assign_arcbuf);
EXPORT_SYMBOL(dbuf_prefetch);
EXPORT_SYMBOL(dbuf_hold_impl);
EXPORT_SYMBOL(dbuf_hold);
EXPORT_SYMBOL(dbuf_hold_level);
EXPORT_SYMBOL(dbuf_create_bonus);
EXPORT_SYMBOL(dbuf_spill_set_blksz);
EXPORT_SYMBOL(dbuf_rm_spill);
EXPORT_SYMBOL(dbuf_add_ref);
EXPORT_SYMBOL(dbuf_rele);
EXPORT_SYMBOL(dbuf_rele_and_unlock);
EXPORT_SYMBOL(dbuf_refcount);
EXPORT_SYMBOL(dbuf_sync_list);
EXPORT_SYMBOL(dmu_buf_set_user);
EXPORT_SYMBOL(dmu_buf_set_user_ie);
EXPORT_SYMBOL(dmu_buf_get_user);
EXPORT_SYMBOL(dmu_buf_get_blkptr);
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
/* BEGIN CSTYLED */
ZFS_MODULE_PARAM(zfs_dbuf_cache, dbuf_cache_, max_bytes, ULONG, ZMOD_RW,
"Maximum size in bytes of the dbuf cache.");
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ZFS_MODULE_PARAM(zfs_dbuf_cache, dbuf_cache_, hiwater_pct, UINT, ZMOD_RW,
"Percentage over dbuf_cache_max_bytes when dbufs must be evicted "
"directly.");
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ZFS_MODULE_PARAM(zfs_dbuf_cache, dbuf_cache_, lowater_pct, UINT, ZMOD_RW,
"Percentage below dbuf_cache_max_bytes when the evict thread stops "
"evicting dbufs.");
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
ZFS_MODULE_PARAM(zfs_dbuf, dbuf_, metadata_cache_max_bytes, ULONG, ZMOD_RW,
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
"Maximum size in bytes of the dbuf metadata cache.");
ZFS_MODULE_PARAM(zfs_dbuf, dbuf_, cache_shift, INT, ZMOD_RW,
OpenZFS 9188 - increase size of dbuf cache to reduce indirect block decompression With compressed ARC (bug 6950) we use up to 25% of our CPU to decompress indirect blocks, under a workload of random cached reads. To reduce this decompression cost, we would like to increase the size of the dbuf cache so that more indirect blocks can be stored uncompressed. If we are caching entire large files of recordsize=8K, the indirect blocks use 1/64th as much memory as the data blocks (assuming they have the same compression ratio). We suggest making the dbuf cache be 1/32nd of all memory, so that in this scenario we should be able to keep all the indirect blocks decompressed in the dbuf cache. (We want it to be more than the 1/64th that the indirect blocks would use because we need to cache other stuff in the dbuf cache as well.) In real world workloads, this won't help as dramatically as the example above, but we think it's still worth it because the risk of decreasing performance is low. The potential negative performance impact is that we will be slightly reducing the size of the ARC (by ~3%). Porting Notes: * Added modules options to zfs-module-parameters.5 man page. * Preserved scaling based on target ARC size rather than max ARC size. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Prashanth Sreenivasa <pks@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/9188 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/564 Upstream bug: DLPX-46942 Closes #7273
2018-03-13 20:52:48 +03:00
"Set the size of the dbuf cache to a log2 fraction of arc size.");
OpenZFS 9337 - zfs get all is slow due to uncached metadata This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Alek Pinchuk <apinchuk@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@datto.com> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
2018-07-10 20:49:50 +03:00
ZFS_MODULE_PARAM(zfs_dbuf, dbuf_, metadata_cache_shift, INT, ZMOD_RW,
"Set the size of the dbuf metadata cache to a log2 fraction of arc "
"size.");
/* END CSTYLED */