c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 10:01:01 +03:00
Code Issues Packages Projects Releases Wiki Activity
498877baf5
mirror_zfs/module/zfs/zpl_inode.c

530 lines
12 KiB
C
Raw Normal View History

Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2011, Lawrence Livermore National Security, LLC.
*/
#include <sys/zfs_vfsops.h>
#include <sys/zfs_vnops.h>
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
#include <sys/zfs_znode.h>
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
#include <sys/vfs.h>
#include <sys/zpl.h>
static struct dentry *
Linux 3.6 compat, iops->lookup() As of Linux commit 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b the struct nameidata is no longer passed to iops->lookup. Instead only the inamedata->flags are passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 18:41:06 +04:00
#ifdef HAVE_LOOKUP_NAMEIDATA
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
zpl_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
Linux 3.6 compat, iops->lookup() As of Linux commit 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b the struct nameidata is no longer passed to iops->lookup. Instead only the inamedata->flags are passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 18:41:06 +04:00
#else
zpl_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip;
int error;
Add explicit MAXNAMELEN check It turns out that the Linux VFS doesn't strictly handle all cases where a component path name exceeds MAXNAMELEN. It does however appear to correctly handle MAXPATHLEN for us. The right way to handle this appears to be to add an explicit check to the zpl_lookup() function. Several in-tree filesystems handle this case the same way. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1279
2013-02-12 00:55:24 +04:00
if (dlen(dentry) > ZFS_MAXNAMELEN)
return ERR_PTR(-ENAMETOOLONG);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_lookup(dir, dname(dentry), &ip, 0, cr, NULL, NULL);
ASSERT3S(error, <=, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
spin_lock(&dentry->d_lock);
dentry->d_time = jiffies;
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-19 02:11:40 +04:00
#ifndef HAVE_S_D_OP
d_set_d_op(dentry, &zpl_dentry_operations);
#endif /* HAVE_S_D_OP */
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
spin_unlock(&dentry->d_lock);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error) {
if (error == -ENOENT)
return d_splice_alias(NULL, dentry);
else
return ERR_PTR(error);
}
return d_splice_alias(ip, dentry);
}
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
void
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vattr_t *vap, struct inode *dir, zpl_umode_t mode, cred_t *cr)
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
{
vap->va_mask = ATTR_MODE;
vap->va_mode = mode;
vap->va_uid = crgetfsuid(cr);
if (dir && dir->i_mode & S_ISGID) {
Linux 3.8 compat: Support CONFIG_UIDGID_STRICT_TYPE_CHECKS When CONFIG_UIDGID_STRICT_TYPE_CHECKS is enabled uid_t/git_t are replaced by kuid_t/kgid_t, which are structures instead of integral types. This causes any code that uses an integral type to fail to build. The User Namespace functionality introduced in Linux 3.8 requires CONFIG_UIDGID_STRICT_TYPE_CHECKS, so we could not build against any kernel that supported it. We resolve this by converting between the new kuid_t/kgid_t structures and the original uid_t/gid_t types. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1589
2013-07-14 20:59:24 +04:00
vap->va_gid = KGID_TO_SGID(dir->i_gid);
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
if (S_ISDIR(mode))
vap->va_mode |= S_ISGID;
} else {
vap->va_gid = crgetfsgid(cr);
}
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
Linux 3.6 compat, iops->create() As of Linux commit ebfc3b49a7ac25920cb5be5445f602e51d2ea559 the struct nameidata is no longer passed to iops->create. Instead only the result of (inamedata->flags & LOOKUP_EXCL) is passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 19:20:58 +04:00
#ifdef HAVE_CREATE_NAMEIDATA
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 23:01:49 +04:00
zpl_create(struct inode *dir, struct dentry *dentry, zpl_umode_t mode,
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct nameidata *nd)
Linux 3.6 compat, iops->create() As of Linux commit ebfc3b49a7ac25920cb5be5445f602e51d2ea559 the struct nameidata is no longer passed to iops->create. Instead only the result of (inamedata->flags & LOOKUP_EXCL) is passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 19:20:58 +04:00
#else
zpl_create(struct inode *dir, struct dentry *dentry, zpl_umode_t mode,
bool flag)
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip;
vattr_t *vap;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Directory xattr znodes hold a reference on their parent Unlike normal file or directory znodes, an xattr znode is guaranteed to only have a single parent. Therefore, we can take a refernce on that parent if it is provided at create time and cache it. Additionally, we take care to cache it on any subsequent zfs_zaccess() where the parent is provided as an optimization. This allows us to avoid needing to do a zfs_zget() when setting up the SELinux security xattr in the create path. This is critical because a hash lookup on the directory will deadlock since it is locked. The zpl_xattr_security_init() call has also been moved up to the zpl layer to ensure TXs to create the required xattrs are performed after the create TX. Otherwise we run the risk of deadlocking on the open create TX. Ideally the security xattr should be fully constructed before the new inode is unlocked. However, doing so would require far more extensive changes to ZFS. This change may also have the benefitial side effect of ensuring xattr directory znodes are evicted from the cache before normal file or directory znodes due to the extra reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #671
2012-11-30 04:10:03 +04:00
error = -zfs_create(dir, dname(dentry), vap, 0, mode, &ip, cr, 0, NULL);
if (error == 0) {
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
VERIFY0(zpl_xattr_security_init(ip, dir, &dentry->d_name));
VERIFY0(zpl_init_acl(ip, dir));
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
d_instantiate(dentry, ip);
Directory xattr znodes hold a reference on their parent Unlike normal file or directory znodes, an xattr znode is guaranteed to only have a single parent. Therefore, we can take a refernce on that parent if it is provided at create time and cache it. Additionally, we take care to cache it on any subsequent zfs_zaccess() where the parent is provided as an optimization. This allows us to avoid needing to do a zfs_zget() when setting up the SELinux security xattr in the create path. This is critical because a hash lookup on the directory will deadlock since it is locked. The zpl_xattr_security_init() call has also been moved up to the zpl layer to ensure TXs to create the required xattrs are performed after the create TX. Otherwise we run the risk of deadlocking on the open create TX. Ideally the security xattr should be fully constructed before the new inode is unlocked. However, doing so would require far more extensive changes to ZFS. This change may also have the benefitial side effect of ensuring xattr directory znodes are evicted from the cache before normal file or directory znodes due to the extra reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #671
2012-11-30 04:10:03 +04:00
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 23:01:49 +04:00
zpl_mknod(struct inode *dir, struct dentry *dentry, zpl_umode_t mode,
dev_t rdev)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip;
vattr_t *vap;
int error;
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 23:31:56 +04:00
/*
* We currently expect Linux to supply rdev=0 for all sockets
* and fifos, but we want to know if this behavior ever changes.
*/
if (S_ISSOCK(mode) || S_ISFIFO(mode))
ASSERT(rdev == 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap->va_rdev = rdev;
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
error = -zfs_create(dir, dname(dentry), vap, 0, mode, &ip, cr, 0, NULL);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
if (error == 0) {
VERIFY0(zpl_init_acl(ip, dir));
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
d_instantiate(dentry, ip);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
}
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
Fix zpl_mknod() return values The zpl_mknod() function was incorrectly negating its return value. This doesn't cause any problems in the success case, but it does prevent us from returning the correct error code for a failure. The implementation of this function is now consistent with all the other zpl_* functions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1717
2013-09-14 00:20:15 +04:00
return (error);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
static int
zpl_unlink(struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_remove(dir, dname(dentry), cr);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 23:01:49 +04:00
zpl_mkdir(struct inode *dir, struct dentry *dentry, zpl_umode_t mode)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
struct inode *ip;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode | S_IFDIR, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_mkdir(dir, dname(dentry), vap, &ip, cr, 0, NULL);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
if (error == 0) {
VERIFY0(zpl_init_acl(ip, dir));
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
d_instantiate(dentry, ip);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
}
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_rmdir(struct inode * dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_rmdir(dir, dname(dentry), NULL, cr, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
boolean_t issnap = ITOZSB(dentry->d_inode)->z_issnap;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
/*
* Ensure MNT_SHRINKABLE is set on snapshots to ensure they are
* unmounted automatically with the parent file system. This
* is done on the first getattr because it's not easy to get the
* vfsmount structure at mount time. This call path is explicitly
* marked unlikely to avoid any performance impact. FWIW, ext4
* resorts to a similar trick for sysadmin convenience.
*/
if (unlikely(issnap && !(mnt->mnt_flags & MNT_SHRINKABLE)))
mnt->mnt_flags |= MNT_SHRINKABLE;
Improve fstat(2) performance There is at most a factor of 3x performance improvement to be had by using the Linux generic_fillattr() helper. However, to use it safely we need to ensure the values in a cached inode are kept rigerously up to date. Unfortunately, this isn't the case for the blksize, blocks, and atime fields. At the moment the authoritative values are still stored in the znode. This patch introduces an optimized zfs_getattr_fast() call. The idea is to use the up to date values from the inode and the blksize, block, and atime fields from the znode. At some latter date we should be able to strictly use the inode values and further improve performance. The remaining overhead in the zfs_getattr_fast() call can be attributed to having to take the znode mutex. This overhead is unavoidable until the inode is kept strictly up to date. The the careful reader will notice the we do not use the customary ZFS_ENTER()/ZFS_EXIT() macros. These macro's are designed to ensure the filesystem is not torn down in the middle of an operation. However, in this case the VFS is holding a reference on the active inode so we know this is impossible. =================== Performance Tests ======================== This test calls the fstat(2) system call 10,000,000 times on an open file description in a tight loop. The test results show the zfs stat(2) performance is now only 22% slower than ext4. This is a 2.5x improvement and there is a clear long term plan to get to parity with ext4. filesystem | test-1 test-2 test-3 | average | times-ext4 --------------+-------------------------+---------+----------- ext4 | 7.785s 7.899s 7.284s | 7.656s | 1.000x zfs-0.6.0-rc4 | 24.052s 22.531s 23.857s | 23.480s | 3.066x zfs-faststat | 9.224s 9.398s 9.485s | 9.369s | 1.223x The second test is to run 'du' of a copy of the /usr tree which contains 110514 files. The test is run multiple times both using both a cold cache (/proc/sys/vm/drop_caches) and a hot cache. As expected this change signigicantly improved the zfs hot cache performance and doesn't quite bring zfs to parity with ext4. A little surprisingly the zfs cold cache performance is better than ext4. This can probably be attributed to the zfs allocation policy of co-locating all the meta data on disk which minimizes seek times. By default the ext4 allocator will spread the data over the entire disk only co-locating each directory. filesystem | cold | hot --------------+---------+-------- ext4 | 13.318s | 1.040s zfs-0.6.0-rc4 | 4.982s | 1.762s zfs-faststat | 4.933s | 1.345s
2011-07-10 02:44:16 +04:00
error = -zfs_getattr_fast(dentry->d_inode, stat);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
zpl_setattr(struct dentry *dentry, struct iattr *ia)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
struct inode *ip = dentry->d_inode;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vattr_t *vap;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
error = inode_change_ok(ip, ia);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error)
return (error);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mask = ia->ia_valid & ATTR_IATTR_MASK;
vap->va_mode = ia->ia_mode;
Linux 3.8 compat: Support CONFIG_UIDGID_STRICT_TYPE_CHECKS When CONFIG_UIDGID_STRICT_TYPE_CHECKS is enabled uid_t/git_t are replaced by kuid_t/kgid_t, which are structures instead of integral types. This causes any code that uses an integral type to fail to build. The User Namespace functionality introduced in Linux 3.8 requires CONFIG_UIDGID_STRICT_TYPE_CHECKS, so we could not build against any kernel that supported it. We resolve this by converting between the new kuid_t/kgid_t structures and the original uid_t/gid_t types. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1589
2013-07-14 20:59:24 +04:00
vap->va_uid = KUID_TO_SUID(ia->ia_uid);
vap->va_gid = KGID_TO_SGID(ia->ia_gid);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vap->va_size = ia->ia_size;
vap->va_atime = ia->ia_atime;
vap->va_mtime = ia->ia_mtime;
vap->va_ctime = ia->ia_ctime;
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
error = -zfs_setattr(ip, vap, 0, cr);
if (!error && (ia->ia_valid & ATTR_MODE))
error = zpl_chmod_acl(ip);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
return (error);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
static int
zpl_rename(struct inode *sdip, struct dentry *sdentry,
struct inode *tdip, struct dentry *tdentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_rename(sdip, dname(sdentry), tdip, dname(tdentry), cr, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_symlink(struct inode *dir, struct dentry *dentry, const char *name)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
struct inode *ip;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, S_IFLNK | S_IRWXUGO, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
error = -zfs_symlink(dir, dname(dentry), vap, (char *)name, &ip, cr, 0);
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-19 02:11:40 +04:00
if (error == 0)
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
d_instantiate(dentry, ip);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static void *
zpl_follow_link(struct dentry *dentry, struct nameidata *nd)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
struct inode *ip = dentry->d_inode;
struct iovec iov;
uio_t uio;
char *link;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
iov.iov_len = MAXPATHLEN;
iov.iov_base = link = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_resid = (MAXPATHLEN - 1);
uio.uio_segflg = UIO_SYSSPACE;
Use -zfs_readlink() error The zfs_readlink() function returns a Solaris positive error value and that needs to be converted to a Linux negative error value. While in this case nothing would actually go wrong, it's still incorrect and should be fixed if for no other reason than clarity.
2011-02-17 20:48:06 +03:00
error = -zfs_readlink(ip, &uio, cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
if (error) {
kmem_free(link, MAXPATHLEN);
nd_set_link(nd, ERR_PTR(error));
} else {
nd_set_link(nd, link);
}
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
return (NULL);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
static void
zpl_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
Fix build failures on PaX/GRSecurity patched kernels Gentoo Hardened kernels include the PaX/GRSecurity patches. They use a dialect of C that relies on a GCC plugin. In particular, struct file_operations has been marked do_const in the PaX/GRSecurity dialect, which causes GCC to consider all instances of it as const. This caused failures in the autotools checks and the ZFS source code. To address this, we modify the autotools checks to take into account differences between the PaX C dialect and the regular C dialect. We also modify struct zfs_acl's z_ops member to be a pointer to a function pointer table. Lastly, we modify zpl_put_link() to address a PaX change to the function prototype of nd_get_link(). This avoids compiler errors in the PaX/GRSecurity dialect. Note that the change in zpl_put_link() causes a warning that becomes a build failure when debugging is enabled. Fixing that warning requires ryao/spl@5ca50ef459c59bc74b7a7cd3af7311da2b1cd2c3. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #484
2012-05-31 07:25:31 +04:00
const char *link = nd_get_link(nd);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (!IS_ERR(link))
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
kmem_free(link, MAXPATHLEN);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
static int
zpl_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip = old_dentry->d_inode;
int error;
if (ip->i_nlink >= ZFS_LINK_MAX)
return -EMLINK;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ip->i_ctime = CURRENT_TIME_SEC;
igrab(ip); /* Use ihold() if available */
error = -zfs_link(dir, ip, dname(dentry), cr);
if (error) {
iput(ip);
goto out;
}
d_instantiate(dentry, ip);
out:
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
Linux 3.5 compat, iops->truncate_range() removed The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 22:11:25 +04:00
#ifdef HAVE_INODE_TRUNCATE_RANGE
Implement the truncate_range() inode operation. This operation allows "hole punching" in ZFS files. On Solaris this is done via the vop_space() system call, which maps to the zfs_space() function. So we just need to write zpl_truncate_range() as a wrapper around zfs_space(). Note that this only works for regular files, not ZVOLs. This is currently an insecure implementation without permission checking, although this isn't that big of a deal since truncate_range() isn't even callable from userspace. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-01 15:59:41 +04:00
static void
zpl_truncate_range(struct inode* ip, loff_t start, loff_t end)
{
cred_t *cr = CRED();
flock64_t bf;
ASSERT3S(start, <=, end);
/*
* zfs_freesp() will interpret (len == 0) as meaning "truncate until
* the end of the file". We don't want that.
*/
if (start == end)
return;
crhold(cr);
bf.l_type = F_WRLCK;
bf.l_whence = 0;
bf.l_start = start;
bf.l_len = end - start;
bf.l_pid = 0;
zfs_space(ip, F_FREESP, &bf, FWRITE, start, cr);
crfree(cr);
}
Linux 3.5 compat, iops->truncate_range() removed The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 22:11:25 +04:00
#endif /* HAVE_INODE_TRUNCATE_RANGE */
Implement the truncate_range() inode operation. This operation allows "hole punching" in ZFS files. On Solaris this is done via the vop_space() system call, which maps to the zfs_space() function. So we just need to write zpl_truncate_range() as a wrapper around zfs_space(). Note that this only works for regular files, not ZVOLs. This is currently an insecure implementation without permission checking, although this isn't that big of a deal since truncate_range() isn't even callable from userspace. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-01 15:59:41 +04:00
Support the fallocate() file operation. Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-02 11:42:07 +04:00
#ifdef HAVE_INODE_FALLOCATE
static long
zpl_fallocate(struct inode *ip, int mode, loff_t offset, loff_t len)
{
return zpl_fallocate_common(ip, mode, offset, len);
}
#endif /* HAVE_INODE_FALLOCATE */
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
static int
#ifdef HAVE_D_REVALIDATE_NAMEIDATA
zpl_revalidate(struct dentry *dentry, struct nameidata *nd)
{
Fix zpl_revalidate() NULL deref In zpl_revalidate() it's possible for the nameidata to be NULL for kernels which still accept the parameter. In particular, lookup_one_len() calls d_revalidate() with a NULL nameidata. Resolve the issue by checking for a NULL nameidata in which case just set the flags to 0. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1226
2013-01-22 21:05:49 +04:00
unsigned int flags = (nd ? nd->flags : 0);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
#else
zpl_revalidate(struct dentry *dentry, unsigned int flags)
{
#endif /* HAVE_D_REVALIDATE_NAMEIDATA */
zfs_sb_t *zsb = dentry->d_sb->s_fs_info;
int error;
if (flags & LOOKUP_RCU)
return (-ECHILD);
/*
* After a rollback negative dentries created before the rollback
* time must be invalidated. Otherwise they can obscure files which
* are only present in the rolled back dataset.
*/
if (dentry->d_inode == NULL) {
spin_lock(&dentry->d_lock);
error = time_before(dentry->d_time, zsb->z_rollback_time);
spin_unlock(&dentry->d_lock);
if (error)
return (0);
}
/*
* The dentry may reference a stale inode if a mounted file system
* was rolled back to a point in time where the object didn't exist.
*/
if (dentry->d_inode && ITOZ(dentry->d_inode)->z_is_stale)
return (0);
return (1);
}
Support the fallocate() file operation. Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-02 11:42:07 +04:00
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
const struct inode_operations zpl_inode_operations = {
.create = zpl_create,
.link = zpl_link,
.unlink = zpl_unlink,
.symlink = zpl_symlink,
.mkdir = zpl_mkdir,
.rmdir = zpl_rmdir,
.mknod = zpl_mknod,
.rename = zpl_rename,
.setattr = zpl_setattr,
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Linux 3.5 compat, iops->truncate_range() removed The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 22:11:25 +04:00
#ifdef HAVE_INODE_TRUNCATE_RANGE
Implement the truncate_range() inode operation. This operation allows "hole punching" in ZFS files. On Solaris this is done via the vop_space() system call, which maps to the zfs_space() function. So we just need to write zpl_truncate_range() as a wrapper around zfs_space(). Note that this only works for regular files, not ZVOLs. This is currently an insecure implementation without permission checking, although this isn't that big of a deal since truncate_range() isn't even callable from userspace. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-01 15:59:41 +04:00
.truncate_range = zpl_truncate_range,
Linux 3.5 compat, iops->truncate_range() removed The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 22:11:25 +04:00
#endif /* HAVE_INODE_TRUNCATE_RANGE */
Support the fallocate() file operation. Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-02 11:42:07 +04:00
#ifdef HAVE_INODE_FALLOCATE
.fallocate = zpl_fallocate,
#endif /* HAVE_INODE_FALLOCATE */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
#if defined(HAVE_GET_ACL)
.get_acl = zpl_get_acl,
#elif defined(HAVE_CHECK_ACL)
.check_acl = zpl_check_acl,
#elif defined(HAVE_PERMISSION)
.permission = zpl_permission,
#endif /* HAVE_GET_ACL | HAVE_CHECK_ACL | HAVE_PERMISSION */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_dir_inode_operations = {
.create = zpl_create,
.lookup = zpl_lookup,
.link = zpl_link,
.unlink = zpl_unlink,
.symlink = zpl_symlink,
.mkdir = zpl_mkdir,
.rmdir = zpl_rmdir,
.mknod = zpl_mknod,
.rename = zpl_rename,
.setattr = zpl_setattr,
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
#if defined(HAVE_GET_ACL)
.get_acl = zpl_get_acl,
#elif defined(HAVE_CHECK_ACL)
.check_acl = zpl_check_acl,
#elif defined(HAVE_PERMISSION)
.permission = zpl_permission,
#endif /* HAVE_GET_ACL | HAVE_CHECK_ACL | HAVE_PERMISSION */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = zpl_follow_link,
.put_link = zpl_put_link,
Set mtime on symbolic links Register the setattr/getattr callbacks for symlinks. Without these the generic inode_setattr() and generic_fillattr() functions will be used. In the setattr case this will only result in the inode being updated in memory, the dirty_inode callback would also normally run but none is registered for zfs. The straight forward fix is to set the setattr/getattr callbacks for symlinks so they are handled just like files and directories. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #412
2011-10-19 01:51:03 +04:00
.setattr = zpl_setattr,
.getattr = zpl_getattr,
Allow xattrs on symlinks The Solaris version of ZFS does not allow xattrs to be set on symlinks due to the way they implemented the attropen() system call. Linux however implements xattrs through the lgetxattr() and lsetxattr() system calls which do not have this limitation. The only reason this hasn't always worked under ZFS on Linux is that the xattr handlers were not registered for symlink type inodes. This was done simply to be consistent with the Solaris behavior. Upon futher reflection I believe this should be allowed under Linux. The only ill effect would be that the xattrs on symlinks will not be visible when the pool is imported on a Solaris system. This also has the benefit that it allows for SELinux style security xattr labeling which expects to be able to set xattrs on all inode types. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #272
2011-11-29 21:05:04 +04:00
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_special_inode_operations = {
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.setattr = zpl_setattr,
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
#if defined(HAVE_GET_ACL)
.get_acl = zpl_get_acl,
#elif defined(HAVE_CHECK_ACL)
.check_acl = zpl_check_acl,
#elif defined(HAVE_PERMISSION)
.permission = zpl_permission,
#endif /* HAVE_GET_ACL | HAVE_CHECK_ACL | HAVE_PERMISSION */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
dentry_operations_t zpl_dentry_operations = {
.d_revalidate = zpl_revalidate,
};
Reference in New Issue Copy Permalink