mirror_zfs/module/zfs/vdev_file.c

232 lines
5.1 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2013 by Delphix. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
#include <sys/zfs_context.h>
#include <sys/spa.h>
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
#include <sys/spa_impl.h>
2008-11-20 23:01:55 +03:00
#include <sys/vdev_file.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
#include <sys/fs/zfs.h>
#include <sys/fm/fs/zfs.h>
2008-11-20 23:01:55 +03:00
/*
* Virtual device vector for files.
*/
static void
vdev_file_hold(vdev_t *vd)
{
ASSERT(vd->vdev_path != NULL);
}
static void
vdev_file_rele(vdev_t *vd)
{
ASSERT(vd->vdev_path != NULL);
}
2008-11-20 23:01:55 +03:00
static int
vdev_file_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
2008-11-20 23:01:55 +03:00
{
vdev_file_t *vf;
vnode_t *vp;
vattr_t vattr;
2008-11-20 23:01:55 +03:00
int error;
/*
* We must have a pathname, and it must be absolute.
*/
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
2008-11-20 23:01:55 +03:00
}
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (vd->vdev_tsd != NULL) {
ASSERT(vd->vdev_reopening);
vf = vd->vdev_tsd;
goto skip_open;
}
vf = vd->vdev_tsd = kmem_zalloc(sizeof (vdev_file_t), KM_PUSHPAGE);
2008-11-20 23:01:55 +03:00
/*
* We always open the files from the root of the global zone, even if
* we're in a local zone. If the user has gotten to this point, the
* administrator has already decided that the pool should be available
* to local zone users, so the underlying devices should be as well.
*/
ASSERT(vd->vdev_path != NULL && vd->vdev_path[0] == '/');
error = vn_openat(vd->vdev_path + 1, UIO_SYSSPACE,
2009-01-16 00:59:39 +03:00
spa_mode(vd->vdev_spa) | FOFFMAX, 0, &vp, 0, 0, rootdir, -1);
2008-11-20 23:01:55 +03:00
if (error) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
return (error);
}
vf->vf_vnode = vp;
#ifdef _KERNEL
/*
* Make sure it's a regular file.
*/
if (vp->v_type != VREG) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
return (SET_ERROR(ENODEV));
2008-11-20 23:01:55 +03:00
}
#endif
skip_open:
2008-11-20 23:01:55 +03:00
/*
* Determine the physical size of the file.
*/
vattr.va_mask = AT_SIZE;
error = VOP_GETATTR(vf->vf_vnode, &vattr, 0, kcred, NULL);
if (error) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
return (error);
}
*max_psize = *psize = vattr.va_size;
2008-11-20 23:01:55 +03:00
*ashift = SPA_MINBLOCKSHIFT;
return (0);
}
static void
vdev_file_close(vdev_t *vd)
{
vdev_file_t *vf = vd->vdev_tsd;
if (vd->vdev_reopening || vf == NULL)
2008-11-20 23:01:55 +03:00
return;
if (vf->vf_vnode != NULL) {
(void) VOP_PUTPAGE(vf->vf_vnode, 0, 0, B_INVAL, kcred, NULL);
2009-01-16 00:59:39 +03:00
(void) VOP_CLOSE(vf->vf_vnode, spa_mode(vd->vdev_spa), 1, 0,
kcred, NULL);
2008-11-20 23:01:55 +03:00
}
vd->vdev_delayed_close = B_FALSE;
2008-11-20 23:01:55 +03:00
kmem_free(vf, sizeof (vdev_file_t));
vd->vdev_tsd = NULL;
}
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
static void
vdev_file_io_strategy(void *arg)
2008-11-20 23:01:55 +03:00
{
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
zio_t *zio = (zio_t *)arg;
2008-11-20 23:01:55 +03:00
vdev_t *vd = zio->io_vd;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
vdev_file_t *vf = vd->vdev_tsd;
ssize_t resid;
2008-11-20 23:01:55 +03:00
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
zio->io_error = vn_rdwr(zio->io_type == ZIO_TYPE_READ ?
UIO_READ : UIO_WRITE, vf->vf_vnode, zio->io_data,
zio->io_size, zio->io_offset, UIO_SYSSPACE,
0, RLIM64_INFINITY, kcred, &resid);
if (resid != 0 && zio->io_error == 0)
zio->io_error = SET_ERROR(ENOSPC);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
zio_interrupt(zio);
}
static int
vdev_file_io_start(zio_t *zio)
{
spa_t *spa = zio->io_spa;
vdev_t *vd = zio->io_vd;
vdev_file_t *vf = vd->vdev_tsd;
2008-11-20 23:01:55 +03:00
if (zio->io_type == ZIO_TYPE_IOCTL) {
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
/* XXPOLICY */
if (!vdev_readable(vd)) {
zio->io_error = SET_ERROR(ENXIO);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
return (ZIO_PIPELINE_CONTINUE);
}
2008-11-20 23:01:55 +03:00
switch (zio->io_cmd) {
case DKIOCFLUSHWRITECACHE:
zio->io_error = VOP_FSYNC(vf->vf_vnode, FSYNC | FDSYNC,
kcred, NULL);
break;
default:
zio->io_error = SET_ERROR(ENOTSUP);
2008-11-20 23:01:55 +03:00
}
return (ZIO_PIPELINE_CONTINUE);
}
Illumos #3581 spa_zio_taskq[ZIO_TYPE_FREE][ZIO_TASKQ_ISSUE]->tq_lock contention 3581 spa_zio_taskq[ZIO_TYPE_FREE][ZIO_TASKQ_ISSUE]->tq_lock is piping hot Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Gordon Ross <gordon.ross@nexenta.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: illumos/illumos-gate@ec94d32 https://illumos.org/issues/3581 Notes for Linux port: Earlier commit 08d08eb reduced contention on this taskq lock by simply reducing the number of z_fr_iss threads from 100 to one-per-CPU. We also optimized the taskq implementation in zfsonlinux/spl@3c6ed54. These changes significantly improved unlink performance to acceptable levels. This patch further reduces time spent spinning on this lock by randomly dispatching the work items over multiple independent task queues. The Illumos ZFS developers stated that this lock contention only arose after "3329 spa_sync() spends 10-20% of its time in spa_free_sync_cb()" was landed. It's not clear if 3329 affects the Linux port or not. I didn't see spa_free_sync_cb() show up in oprofile sessions while unlinking large files, but I may just not have used the right test case. I tested unlinking a 1 TB of data with and without the patch and didn't observe a meaningful difference in elapsed time. However, oprofile showed that the percent time spent in taskq_thread() was reduced from about 16% to about 5%. Aside from a possible slight performance benefit this may be worth landing if only for the sake of maintaining consistency with upstream. Ported-by: Ned Bass <bass6@llnl.gov> Closes #1327
2013-05-06 23:24:30 +04:00
spa_taskq_dispatch_ent(spa, ZIO_TYPE_FREE, ZIO_TASKQ_ISSUE,
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-03 03:36:32 +04:00
vdev_file_io_strategy, zio, 0, &zio->io_tqent);
2008-11-20 23:01:55 +03:00
return (ZIO_PIPELINE_STOP);
}
/* ARGSUSED */
static void
2008-11-20 23:01:55 +03:00
vdev_file_io_done(zio_t *zio)
{
}
vdev_ops_t vdev_file_ops = {
vdev_file_open,
vdev_file_close,
vdev_default_asize,
vdev_file_io_start,
vdev_file_io_done,
NULL,
vdev_file_hold,
vdev_file_rele,
2008-11-20 23:01:55 +03:00
VDEV_TYPE_FILE, /* name of this vdev type */
B_TRUE /* leaf vdev */
};
/*
* From userland we access disks just like files.
*/
#ifndef _KERNEL
vdev_ops_t vdev_disk_ops = {
vdev_file_open,
vdev_file_close,
vdev_default_asize,
vdev_file_io_start,
vdev_file_io_done,
NULL,
vdev_file_hold,
vdev_file_rele,
2008-11-20 23:01:55 +03:00
VDEV_TYPE_DISK, /* name of this vdev type */
B_TRUE /* leaf vdev */
};
#endif