mirror_zfs/cmd/zhack/zhack.c

570 lines
13 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2011, 2015 by Delphix. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
*/
/*
* zhack is a debugging tool that can write changes to ZFS pool using libzpool
* for testing purposes. Altering pools with zhack is unsupported and may
* result in corrupted pools.
*/
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/dmu.h>
#include <sys/zap.h>
#include <sys/zfs_znode.h>
#include <sys/dsl_synctask.h>
#include <sys/vdev.h>
#include <sys/fs/zfs.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_pool.h>
#include <sys/zio_checksum.h>
#include <sys/zio_compress.h>
#include <sys/zfeature.h>
#include <sys/dmu_tx.h>
#include <libzfs.h>
extern boolean_t zfeature_checks_disable;
const char cmdname[] = "zhack";
libzfs_handle_t *g_zfs;
static importargs_t g_importargs;
static char *g_pool;
static boolean_t g_readonly;
static void
usage(void)
{
(void) fprintf(stderr,
"Usage: %s [-c cachefile] [-d dir] <subcommand> <args> ...\n"
"where <subcommand> <args> is one of the following:\n"
"\n", cmdname);
(void) fprintf(stderr,
" feature stat <pool>\n"
" print information about enabled features\n"
" feature enable [-r] [-d desc] <pool> <feature>\n"
" add a new enabled feature to the pool\n"
" -d <desc> sets the feature's description\n"
" -r set read-only compatible flag for feature\n"
" feature ref [-md] <pool> <feature>\n"
" change the refcount on the given feature\n"
" -d decrease instead of increase the refcount\n"
" -m add the feature to the label if increasing refcount\n"
"\n"
" <feature> : should be a feature guid\n");
exit(1);
}
static void
fatal(spa_t *spa, void *tag, const char *fmt, ...)
{
va_list ap;
if (spa != NULL) {
spa_close(spa, tag);
(void) spa_export(g_pool, NULL, B_TRUE, B_FALSE);
}
va_start(ap, fmt);
(void) fprintf(stderr, "%s: ", cmdname);
(void) vfprintf(stderr, fmt, ap);
va_end(ap);
(void) fprintf(stderr, "\n");
exit(1);
}
/* ARGSUSED */
static int
space_delta_cb(dmu_object_type_t bonustype, void *data,
uint64_t *userp, uint64_t *groupp)
{
/*
* Is it a valid type of object to track?
*/
if (bonustype != DMU_OT_ZNODE && bonustype != DMU_OT_SA)
return (ENOENT);
(void) fprintf(stderr, "modifying object that needs user accounting");
abort();
/* NOTREACHED */
}
/*
* Target is the dataset whose pool we want to open.
*/
static void
import_pool(const char *target, boolean_t readonly)
{
nvlist_t *config;
nvlist_t *pools;
int error;
char *sepp;
spa_t *spa;
nvpair_t *elem;
nvlist_t *props;
char *name;
kernel_init(readonly ? FREAD : (FREAD | FWRITE));
g_zfs = libzfs_init();
ASSERT(g_zfs != NULL);
dmu_objset_register_type(DMU_OST_ZFS, space_delta_cb);
g_readonly = readonly;
/*
* If we only want readonly access, it's OK if we find
* a potentially-active (ie, imported into the kernel) pool from the
* default cachefile.
*/
if (readonly && spa_open(target, &spa, FTAG) == 0) {
spa_close(spa, FTAG);
return;
}
g_importargs.unique = B_TRUE;
g_importargs.can_be_active = readonly;
g_pool = strdup(target);
if ((sepp = strpbrk(g_pool, "/@")) != NULL)
*sepp = '\0';
g_importargs.poolname = g_pool;
pools = zpool_search_import(g_zfs, &g_importargs);
if (nvlist_empty(pools)) {
if (!g_importargs.can_be_active) {
g_importargs.can_be_active = B_TRUE;
if (zpool_search_import(g_zfs, &g_importargs) != NULL ||
spa_open(target, &spa, FTAG) == 0) {
fatal(spa, FTAG, "cannot import '%s': pool is "
"active; run " "\"zpool export %s\" "
"first\n", g_pool, g_pool);
}
}
fatal(NULL, FTAG, "cannot import '%s': no such pool "
"available\n", g_pool);
}
elem = nvlist_next_nvpair(pools, NULL);
name = nvpair_name(elem);
VERIFY(nvpair_value_nvlist(elem, &config) == 0);
props = NULL;
if (readonly) {
VERIFY(nvlist_alloc(&props, NV_UNIQUE_NAME, 0) == 0);
VERIFY(nvlist_add_uint64(props,
zpool_prop_to_name(ZPOOL_PROP_READONLY), 1) == 0);
}
zfeature_checks_disable = B_TRUE;
error = spa_import(name, config, props, ZFS_IMPORT_NORMAL);
zfeature_checks_disable = B_FALSE;
if (error == EEXIST)
error = 0;
if (error)
fatal(NULL, FTAG, "can't import '%s': %s", name,
strerror(error));
}
static void
zhack_spa_open(const char *target, boolean_t readonly, void *tag, spa_t **spa)
{
int err;
import_pool(target, readonly);
zfeature_checks_disable = B_TRUE;
err = spa_open(target, spa, tag);
zfeature_checks_disable = B_FALSE;
if (err != 0)
fatal(*spa, FTAG, "cannot open '%s': %s", target,
strerror(err));
if (spa_version(*spa) < SPA_VERSION_FEATURES) {
fatal(*spa, FTAG, "'%s' has version %d, features not enabled",
target, (int)spa_version(*spa));
}
}
static void
dump_obj(objset_t *os, uint64_t obj, const char *name)
{
zap_cursor_t zc;
zap_attribute_t za;
(void) printf("%s_obj:\n", name);
for (zap_cursor_init(&zc, os, obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
if (za.za_integer_length == 8) {
ASSERT(za.za_num_integers == 1);
(void) printf("\t%s = %llu\n",
za.za_name, (u_longlong_t)za.za_first_integer);
} else {
ASSERT(za.za_integer_length == 1);
char val[1024];
VERIFY(zap_lookup(os, obj, za.za_name,
1, sizeof (val), val) == 0);
(void) printf("\t%s = %s\n", za.za_name, val);
}
}
zap_cursor_fini(&zc);
}
static void
dump_mos(spa_t *spa)
{
nvlist_t *nv = spa->spa_label_features;
nvpair_t *pair;
(void) printf("label config:\n");
for (pair = nvlist_next_nvpair(nv, NULL);
pair != NULL;
pair = nvlist_next_nvpair(nv, pair)) {
(void) printf("\t%s\n", nvpair_name(pair));
}
}
static void
zhack_do_feature_stat(int argc, char **argv)
{
spa_t *spa;
objset_t *os;
char *target;
argc--;
argv++;
if (argc < 1) {
(void) fprintf(stderr, "error: missing pool name\n");
usage();
}
target = argv[0];
zhack_spa_open(target, B_TRUE, FTAG, &spa);
os = spa->spa_meta_objset;
dump_obj(os, spa->spa_feat_for_read_obj, "for_read");
dump_obj(os, spa->spa_feat_for_write_obj, "for_write");
dump_obj(os, spa->spa_feat_desc_obj, "descriptions");
if (spa_feature_is_active(spa, SPA_FEATURE_ENABLED_TXG)) {
dump_obj(os, spa->spa_feat_enabled_txg_obj, "enabled_txg");
}
dump_mos(spa);
spa_close(spa, FTAG);
}
static void
zhack_feature_enable_sync(void *arg, dmu_tx_t *tx)
{
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
zfeature_info_t *feature = arg;
feature_enable_sync(spa, feature, tx);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
spa_history_log_internal(spa, "zhack enable feature", tx,
"name=%s flags=%u",
feature->fi_guid, feature->fi_flags);
}
static void
zhack_do_feature_enable(int argc, char **argv)
{
char c;
char *desc, *target;
spa_t *spa;
objset_t *mos;
zfeature_info_t feature;
spa_feature_t nodeps[] = { SPA_FEATURE_NONE };
/*
* Features are not added to the pool's label until their refcounts
* are incremented, so fi_mos can just be left as false for now.
*/
desc = NULL;
feature.fi_uname = "zhack";
feature.fi_flags = 0;
feature.fi_depends = nodeps;
feature.fi_feature = SPA_FEATURE_NONE;
optind = 1;
while ((c = getopt(argc, argv, "+rd:")) != -1) {
switch (c) {
case 'r':
feature.fi_flags |= ZFEATURE_FLAG_READONLY_COMPAT;
break;
case 'd':
desc = strdup(optarg);
break;
default:
usage();
break;
}
}
if (desc == NULL)
desc = strdup("zhack injected");
feature.fi_desc = desc;
argc -= optind;
argv += optind;
if (argc < 2) {
(void) fprintf(stderr, "error: missing feature or pool name\n");
usage();
}
target = argv[0];
feature.fi_guid = argv[1];
if (!zfeature_is_valid_guid(feature.fi_guid))
fatal(NULL, FTAG, "invalid feature guid: %s", feature.fi_guid);
zhack_spa_open(target, B_FALSE, FTAG, &spa);
mos = spa->spa_meta_objset;
if (zfeature_is_supported(feature.fi_guid))
fatal(spa, FTAG, "'%s' is a real feature, will not enable");
if (0 == zap_contains(mos, spa->spa_feat_desc_obj, feature.fi_guid))
fatal(spa, FTAG, "feature already enabled: %s",
feature.fi_guid);
VERIFY0(dsl_sync_task(spa_name(spa), NULL,
zhack_feature_enable_sync, &feature, 5, ZFS_SPACE_CHECK_NORMAL));
spa_close(spa, FTAG);
free(desc);
}
static void
feature_incr_sync(void *arg, dmu_tx_t *tx)
{
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
zfeature_info_t *feature = arg;
uint64_t refcount;
VERIFY0(feature_get_refcount_from_disk(spa, feature, &refcount));
feature_sync(spa, feature, refcount + 1, tx);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
spa_history_log_internal(spa, "zhack feature incr", tx,
"name=%s", feature->fi_guid);
}
static void
feature_decr_sync(void *arg, dmu_tx_t *tx)
{
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
zfeature_info_t *feature = arg;
uint64_t refcount;
VERIFY0(feature_get_refcount_from_disk(spa, feature, &refcount));
feature_sync(spa, feature, refcount - 1, tx);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
spa_history_log_internal(spa, "zhack feature decr", tx,
"name=%s", feature->fi_guid);
}
static void
zhack_do_feature_ref(int argc, char **argv)
{
char c;
char *target;
boolean_t decr = B_FALSE;
spa_t *spa;
objset_t *mos;
zfeature_info_t feature;
spa_feature_t nodeps[] = { SPA_FEATURE_NONE };
/*
* fi_desc does not matter here because it was written to disk
* when the feature was enabled, but we need to properly set the
* feature for read or write based on the information we read off
* disk later.
*/
feature.fi_uname = "zhack";
feature.fi_flags = 0;
feature.fi_desc = NULL;
feature.fi_depends = nodeps;
feature.fi_feature = SPA_FEATURE_NONE;
optind = 1;
while ((c = getopt(argc, argv, "+md")) != -1) {
switch (c) {
case 'm':
feature.fi_flags |= ZFEATURE_FLAG_MOS;
break;
case 'd':
decr = B_TRUE;
break;
default:
usage();
break;
}
}
argc -= optind;
argv += optind;
if (argc < 2) {
(void) fprintf(stderr, "error: missing feature or pool name\n");
usage();
}
target = argv[0];
feature.fi_guid = argv[1];
if (!zfeature_is_valid_guid(feature.fi_guid))
fatal(NULL, FTAG, "invalid feature guid: %s", feature.fi_guid);
zhack_spa_open(target, B_FALSE, FTAG, &spa);
mos = spa->spa_meta_objset;
if (zfeature_is_supported(feature.fi_guid)) {
fatal(spa, FTAG,
"'%s' is a real feature, will not change refcount");
}
if (0 == zap_contains(mos, spa->spa_feat_for_read_obj,
feature.fi_guid)) {
feature.fi_flags &= ~ZFEATURE_FLAG_READONLY_COMPAT;
} else if (0 == zap_contains(mos, spa->spa_feat_for_write_obj,
feature.fi_guid)) {
feature.fi_flags |= ZFEATURE_FLAG_READONLY_COMPAT;
} else {
fatal(spa, FTAG, "feature is not enabled: %s", feature.fi_guid);
}
if (decr) {
uint64_t count;
if (feature_get_refcount_from_disk(spa, &feature,
&count) == 0 && count == 0) {
fatal(spa, FTAG, "feature refcount already 0: %s",
feature.fi_guid);
}
}
VERIFY0(dsl_sync_task(spa_name(spa), NULL,
decr ? feature_decr_sync : feature_incr_sync, &feature,
5, ZFS_SPACE_CHECK_NORMAL));
spa_close(spa, FTAG);
}
static int
zhack_do_feature(int argc, char **argv)
{
char *subcommand;
argc--;
argv++;
if (argc == 0) {
(void) fprintf(stderr,
"error: no feature operation specified\n");
usage();
}
subcommand = argv[0];
if (strcmp(subcommand, "stat") == 0) {
zhack_do_feature_stat(argc, argv);
} else if (strcmp(subcommand, "enable") == 0) {
zhack_do_feature_enable(argc, argv);
} else if (strcmp(subcommand, "ref") == 0) {
zhack_do_feature_ref(argc, argv);
} else {
(void) fprintf(stderr, "error: unknown subcommand: %s\n",
subcommand);
usage();
}
return (0);
}
#define MAX_NUM_PATHS 1024
int
main(int argc, char **argv)
{
extern void zfs_prop_init(void);
char *path[MAX_NUM_PATHS];
const char *subcommand;
int rv = 0;
char c;
g_importargs.path = path;
dprintf_setup(&argc, argv);
zfs_prop_init();
while ((c = getopt(argc, argv, "+c:d:")) != -1) {
switch (c) {
case 'c':
g_importargs.cachefile = optarg;
break;
case 'd':
assert(g_importargs.paths < MAX_NUM_PATHS);
g_importargs.path[g_importargs.paths++] = optarg;
break;
default:
usage();
break;
}
}
argc -= optind;
argv += optind;
optind = 1;
if (argc == 0) {
(void) fprintf(stderr, "error: no command specified\n");
usage();
}
subcommand = argv[0];
if (strcmp(subcommand, "feature") == 0) {
rv = zhack_do_feature(argc, argv);
} else {
(void) fprintf(stderr, "error: unknown subcommand: %s\n",
subcommand);
usage();
}
if (!g_readonly && spa_export(g_pool, NULL, B_TRUE, B_FALSE) != 0) {
fatal(NULL, FTAG, "pool export failed; "
"changes may not be committed to disk\n");
}
libzfs_fini(g_zfs);
kernel_fini();
return (rv);
}