mirror_zfs/include/libzfs.h

1015 lines
36 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
2008-11-20 23:01:55 +03:00
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2022 by Delphix. All rights reserved.
* Copyright Joyent, Inc.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
* Copyright (c) 2016, Intel Corporation.
* Copyright 2016 Nexenta Systems, Inc.
* Copyright (c) 2017 Open-E, Inc. All Rights Reserved.
* Copyright (c) 2019 Datto Inc.
Add "compatibility" property for zpool feature sets Property to allow sets of features to be specified; for compatibility with specific versions / releases / external systems. Influences the behavior of 'zpool upgrade' and 'zpool create'. Initial man page changes and test cases included. Brief synopsis: zpool create -o compatibility=off|legacy|file[,file...] pool vdev... compatibility = off : disable compatibility mode (enable all features) compatibility = legacy : request that no features be enabled compatibility = file[,file...] : read features from specified files. Only features present in *all* files will be enabled on the resulting pool. Filenames may be absolute, or relative to /etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc checked first). Only affects zpool create, zpool upgrade and zpool status. ABI changes in libzfs: * New function "zpool_load_compat" to load and parse compat sets. * Add "zpool_compat_status_t" typedef for compatibility parse status. * Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum * Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum An initial set of base compatibility sets are included in cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is modified to install these in $pkgdatadir/compatibility.d and to create symbolic links to a reasonable set of aliases. Reviewed-by: ericloewe Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Colm Buckley <colm@tuatha.org> Closes #11468
2021-02-18 08:30:45 +03:00
* Copyright (c) 2021, Colm Buckley <colm@tuatha.org>
2008-11-20 23:01:55 +03:00
*/
#ifndef _LIBZFS_H
#define _LIBZFS_H extern __attribute__((visibility("default")))
2008-11-20 23:01:55 +03:00
#include <assert.h>
#include <libshare.h>
2008-11-20 23:01:55 +03:00
#include <libnvpair.h>
2009-01-16 00:59:39 +03:00
#include <sys/mnttab.h>
2008-11-20 23:01:55 +03:00
#include <sys/param.h>
#include <sys/types.h>
#include <sys/fs/zfs.h>
#include <sys/avl.h>
#include <libzfs_core.h>
2008-11-20 23:01:55 +03:00
#ifdef __cplusplus
extern "C" {
#endif
/*
* Miscellaneous ZFS constants
*/
#define ZFS_MAXPROPLEN MAXPATHLEN
#define ZPOOL_MAXPROPLEN MAXPATHLEN
/*
* libzfs errors
*/
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
typedef enum zfs_error {
EZFS_SUCCESS = 0, /* no error -- success */
2008-11-20 23:01:55 +03:00
EZFS_NOMEM = 2000, /* out of memory */
EZFS_BADPROP, /* invalid property value */
EZFS_PROPREADONLY, /* cannot set readonly property */
EZFS_PROPTYPE, /* property does not apply to dataset type */
EZFS_PROPNONINHERIT, /* property is not inheritable */
EZFS_PROPSPACE, /* bad quota or reservation */
EZFS_BADTYPE, /* dataset is not of appropriate type */
EZFS_BUSY, /* pool or dataset is busy */
EZFS_EXISTS, /* pool or dataset already exists */
EZFS_NOENT, /* no such pool or dataset */
EZFS_BADSTREAM, /* bad backup stream */
EZFS_DSREADONLY, /* dataset is readonly */
EZFS_VOLTOOBIG, /* volume is too large for 32-bit system */
EZFS_INVALIDNAME, /* invalid dataset name */
EZFS_BADRESTORE, /* unable to restore to destination */
EZFS_BADBACKUP, /* backup failed */
EZFS_BADTARGET, /* bad attach/detach/replace target */
EZFS_NODEVICE, /* no such device in pool */
EZFS_BADDEV, /* invalid device to add */
EZFS_NOREPLICAS, /* no valid replicas */
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 21:05:50 +03:00
EZFS_RESILVERING, /* resilvering (healing reconstruction) */
2008-11-20 23:01:55 +03:00
EZFS_BADVERSION, /* unsupported version */
EZFS_POOLUNAVAIL, /* pool is currently unavailable */
EZFS_DEVOVERFLOW, /* too many devices in one vdev */
EZFS_BADPATH, /* must be an absolute path */
EZFS_CROSSTARGET, /* rename or clone across pool or dataset */
EZFS_ZONED, /* used improperly in local zone */
EZFS_MOUNTFAILED, /* failed to mount dataset */
EZFS_UMOUNTFAILED, /* failed to unmount dataset */
EZFS_UNSHARENFSFAILED, /* failed to unshare over nfs */
EZFS_SHARENFSFAILED, /* failed to share over nfs */
2008-11-20 23:01:55 +03:00
EZFS_PERM, /* permission denied */
EZFS_NOSPC, /* out of space */
EZFS_FAULT, /* bad address */
2008-11-20 23:01:55 +03:00
EZFS_IO, /* I/O error */
EZFS_INTR, /* signal received */
EZFS_ISSPARE, /* device is a hot spare */
EZFS_INVALCONFIG, /* invalid vdev configuration */
EZFS_RECURSIVE, /* recursive dependency */
EZFS_NOHISTORY, /* no history object */
EZFS_POOLPROPS, /* couldn't retrieve pool props */
EZFS_POOL_NOTSUP, /* ops not supported for this type of pool */
EZFS_POOL_INVALARG, /* invalid argument for this pool operation */
EZFS_NAMETOOLONG, /* dataset name is too long */
EZFS_OPENFAILED, /* open of device failed */
EZFS_NOCAP, /* couldn't get capacity */
EZFS_LABELFAILED, /* write of label failed */
EZFS_BADWHO, /* invalid permission who */
EZFS_BADPERM, /* invalid permission */
EZFS_BADPERMSET, /* invalid permission set name */
EZFS_NODELEGATION, /* delegated administration is disabled */
EZFS_UNSHARESMBFAILED, /* failed to unshare over smb */
EZFS_SHARESMBFAILED, /* failed to share over smb */
EZFS_BADCACHE, /* bad cache file */
EZFS_ISL2CACHE, /* device is for the level 2 ARC */
EZFS_VDEVNOTSUP, /* unsupported vdev type */
EZFS_NOTSUP, /* ops not supported on this dataset */
EZFS_ACTIVE_SPARE, /* pool has active shared spare devices */
2009-07-03 02:44:48 +04:00
EZFS_UNPLAYED_LOGS, /* log device has unplayed logs */
2009-08-18 22:43:27 +04:00
EZFS_REFTAG_RELE, /* snapshot release: tag not found */
EZFS_REFTAG_HOLD, /* snapshot hold: tag already exists */
EZFS_TAGTOOLONG, /* snapshot hold/rele: tag too long */
EZFS_PIPEFAILED, /* pipe create failed */
EZFS_THREADCREATEFAILED, /* thread create failed */
EZFS_POSTSPLIT_ONLINE, /* onlining a disk after splitting it */
EZFS_SCRUBBING, /* currently scrubbing */
EZFS_NO_SCRUB, /* no active scrub */
EZFS_DIFF, /* general failure of zfs diff */
EZFS_DIFFDATA, /* bad zfs diff data */
EZFS_POOLREADONLY, /* pool is in read-only mode */
EZFS_SCRUB_PAUSED, /* scrub currently paused */
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
EZFS_ACTIVE_POOL, /* pool is imported on a different system */
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
EZFS_CRYPTOFAILED, /* failed to setup encryption */
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
EZFS_NO_PENDING, /* cannot cancel, no operation is pending */
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-17 01:11:29 +03:00
EZFS_CHECKPOINT_EXISTS, /* checkpoint exists */
EZFS_DISCARDING_CHECKPOINT, /* currently discarding a checkpoint */
EZFS_NO_CHECKPOINT, /* pool has no checkpoint */
EZFS_DEVRM_IN_PROGRESS, /* a device is currently being removed */
EZFS_VDEV_TOO_BIG, /* a device is too big to be used */
EZFS_IOC_NOTSUPPORTED, /* operation not supported by zfs module */
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 17:54:59 +03:00
EZFS_TOOMANY, /* argument list too long */
EZFS_INITIALIZING, /* currently initializing */
EZFS_NO_INITIALIZE, /* no active initialize */
EZFS_WRONG_PARENT, /* invalid parent dataset (e.g ZVOL) */
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
EZFS_TRIMMING, /* currently trimming */
EZFS_NO_TRIM, /* no active trim */
EZFS_TRIM_NOTSUP, /* device does not support trim */
EZFS_NO_RESILVER_DEFER, /* pool doesn't support resilver_defer */
EZFS_EXPORT_IN_PROGRESS, /* currently exporting the pool */
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 21:05:50 +03:00
EZFS_REBUILDING, /* resilvering (sequential reconstrution) */
EZFS_VDEV_NOTSUP, /* ops not supported for this type of vdev */
EZFS_NOT_USER_NAMESPACE, /* a file is not a user namespace */
EZFS_CKSUM, /* insufficient replicas */
EZFS_RESUME_EXISTS, /* Resume on existing dataset without force */
2008-11-20 23:01:55 +03:00
EZFS_UNKNOWN
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
} zfs_error_t;
2008-11-20 23:01:55 +03:00
/*
* The following data structures are all part
* of the zfs_allow_t data structure which is
* used for printing 'allow' permissions.
* It is a linked list of zfs_allow_t's which
* then contain avl tree's for user/group/sets/...
* and each one of the entries in those trees have
* avl tree's for the permissions they belong to and
* whether they are local,descendent or local+descendent
* permissions. The AVL trees are used primarily for
* sorting purposes, but also so that we can quickly find
* a given user and or permission.
*/
typedef struct zfs_perm_node {
avl_node_t z_node;
char z_pname[MAXPATHLEN];
} zfs_perm_node_t;
typedef struct zfs_allow_node {
avl_node_t z_node;
char z_key[MAXPATHLEN]; /* name, such as joe */
avl_tree_t z_localdescend; /* local+descendent perms */
avl_tree_t z_local; /* local permissions */
avl_tree_t z_descend; /* descendent permissions */
} zfs_allow_node_t;
typedef struct zfs_allow {
struct zfs_allow *z_next;
char z_setpoint[MAXPATHLEN];
avl_tree_t z_sets;
avl_tree_t z_crperms;
avl_tree_t z_user;
avl_tree_t z_group;
avl_tree_t z_everyone;
} zfs_allow_t;
/*
* Basic handle types
*/
typedef struct zfs_handle zfs_handle_t;
typedef struct zpool_handle zpool_handle_t;
typedef struct libzfs_handle libzfs_handle_t;
_LIBZFS_H int zpool_wait(zpool_handle_t *, zpool_wait_activity_t);
_LIBZFS_H int zpool_wait_status(zpool_handle_t *, zpool_wait_activity_t,
Add subcommand to wait for background zfs activity to complete Currently the best way to wait for the completion of a long-running operation in a pool, like a scrub or device removal, is to poll 'zpool status' and parse its output, which is neither efficient nor convenient. This change adds a 'wait' subcommand to the zpool command. When invoked, 'zpool wait' will block until a specified type of background activity completes. Currently, this subcommand can wait for any of the following: - Scrubs or resilvers to complete - Devices to initialized - Devices to be replaced - Devices to be removed - Checkpoints to be discarded - Background freeing to complete For example, a scrub that is in progress could be waited for by running zpool wait -t scrub <pool> This also adds a -w flag to the attach, checkpoint, initialize, replace, remove, and scrub subcommands. When used, this flag makes the operations kicked off by these subcommands synchronous instead of asynchronous. This functionality is implemented using a new ioctl. The type of activity to wait for is provided as input to the ioctl, and the ioctl blocks until all activity of that type has completed. An ioctl was used over other methods of kernel-userspace communiction primarily for the sake of portability. Porting Notes: This is ported from Delphix OS change DLPX-44432. The following changes were made while porting: - Added ZoL-style ioctl input declaration. - Reorganized error handling in zpool_initialize in libzfs to integrate better with changes made for TRIM support. - Fixed check for whether a checkpoint discard is in progress. Previously it also waited if the pool had a checkpoint, instead of just if a checkpoint was being discarded. - Exposed zfs_initialize_chunk_size as a ZoL-style tunable. - Updated more existing tests to make use of new 'zpool wait' functionality, tests that don't exist in Delphix OS. - Used existing ZoL tunable zfs_scan_suspend_progress, together with zinject, in place of a new tunable zfs_scan_max_blks_per_txg. - Added support for a non-integral interval argument to zpool wait. Future work: ZoL has support for trimming devices, which Delphix OS does not. In the future, 'zpool wait' could be extended to add the ability to wait for trim operations to complete. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #9162
2019-09-14 04:09:06 +03:00
boolean_t *, boolean_t *);
2008-11-20 23:01:55 +03:00
/*
* Library initialization
*/
_LIBZFS_H libzfs_handle_t *libzfs_init(void);
_LIBZFS_H void libzfs_fini(libzfs_handle_t *);
2008-11-20 23:01:55 +03:00
_LIBZFS_H libzfs_handle_t *zpool_get_handle(zpool_handle_t *);
_LIBZFS_H libzfs_handle_t *zfs_get_handle(zfs_handle_t *);
2008-11-20 23:01:55 +03:00
_LIBZFS_H void libzfs_print_on_error(libzfs_handle_t *, boolean_t);
2008-11-20 23:01:55 +03:00
_LIBZFS_H void zfs_save_arguments(int argc, char **, char *, int);
_LIBZFS_H int zpool_log_history(libzfs_handle_t *, const char *);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
_LIBZFS_H int libzfs_errno(libzfs_handle_t *);
_LIBZFS_H const char *libzfs_error_init(int);
_LIBZFS_H const char *libzfs_error_action(libzfs_handle_t *);
_LIBZFS_H const char *libzfs_error_description(libzfs_handle_t *);
_LIBZFS_H int zfs_standard_error(libzfs_handle_t *, int, const char *);
_LIBZFS_H void libzfs_mnttab_init(libzfs_handle_t *);
_LIBZFS_H void libzfs_mnttab_fini(libzfs_handle_t *);
_LIBZFS_H void libzfs_mnttab_cache(libzfs_handle_t *, boolean_t);
_LIBZFS_H int libzfs_mnttab_find(libzfs_handle_t *, const char *,
2009-01-16 00:59:39 +03:00
struct mnttab *);
_LIBZFS_H void libzfs_mnttab_add(libzfs_handle_t *, const char *,
2009-01-16 00:59:39 +03:00
const char *, const char *);
_LIBZFS_H void libzfs_mnttab_remove(libzfs_handle_t *, const char *);
2008-11-20 23:01:55 +03:00
/*
* Basic handle functions
*/
_LIBZFS_H zpool_handle_t *zpool_open(libzfs_handle_t *, const char *);
_LIBZFS_H zpool_handle_t *zpool_open_canfail(libzfs_handle_t *, const char *);
_LIBZFS_H void zpool_close(zpool_handle_t *);
_LIBZFS_H const char *zpool_get_name(zpool_handle_t *);
_LIBZFS_H int zpool_get_state(zpool_handle_t *);
_LIBZFS_H const char *zpool_state_to_name(vdev_state_t, vdev_aux_t);
_LIBZFS_H const char *zpool_pool_state_to_name(pool_state_t);
_LIBZFS_H void zpool_free_handles(libzfs_handle_t *);
2008-11-20 23:01:55 +03:00
/*
* Iterate over all active pools in the system.
*/
typedef int (*zpool_iter_f)(zpool_handle_t *, void *);
_LIBZFS_H int zpool_iter(libzfs_handle_t *, zpool_iter_f, void *);
_LIBZFS_H boolean_t zpool_skip_pool(const char *);
2008-11-20 23:01:55 +03:00
/*
* Functions to create and destroy pools
*/
_LIBZFS_H int zpool_create(libzfs_handle_t *, const char *, nvlist_t *,
nvlist_t *, nvlist_t *);
_LIBZFS_H int zpool_destroy(zpool_handle_t *, const char *);
_LIBZFS_H int zpool_add(zpool_handle_t *, nvlist_t *);
2008-11-20 23:01:55 +03:00
typedef struct splitflags {
/* do not split, but return the config that would be split off */
unsigned int dryrun : 1;
/* after splitting, import the pool */
unsigned int import : 1;
int name_flags;
} splitflags_t;
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
typedef struct trimflags {
/* requested vdevs are for the entire pool */
boolean_t fullpool;
/* request a secure trim, requires support from device */
boolean_t secure;
/* after starting trim, block until trim completes */
boolean_t wait;
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
/* trim at the requested rate in bytes/second */
uint64_t rate;
} trimflags_t;
2008-11-20 23:01:55 +03:00
/*
* Functions to manipulate pool and vdev state
*/
_LIBZFS_H int zpool_scan(zpool_handle_t *, pool_scan_func_t, pool_scrub_cmd_t);
_LIBZFS_H int zpool_initialize(zpool_handle_t *, pool_initialize_func_t,
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 17:54:59 +03:00
nvlist_t *);
_LIBZFS_H int zpool_initialize_wait(zpool_handle_t *, pool_initialize_func_t,
Add subcommand to wait for background zfs activity to complete Currently the best way to wait for the completion of a long-running operation in a pool, like a scrub or device removal, is to poll 'zpool status' and parse its output, which is neither efficient nor convenient. This change adds a 'wait' subcommand to the zpool command. When invoked, 'zpool wait' will block until a specified type of background activity completes. Currently, this subcommand can wait for any of the following: - Scrubs or resilvers to complete - Devices to initialized - Devices to be replaced - Devices to be removed - Checkpoints to be discarded - Background freeing to complete For example, a scrub that is in progress could be waited for by running zpool wait -t scrub <pool> This also adds a -w flag to the attach, checkpoint, initialize, replace, remove, and scrub subcommands. When used, this flag makes the operations kicked off by these subcommands synchronous instead of asynchronous. This functionality is implemented using a new ioctl. The type of activity to wait for is provided as input to the ioctl, and the ioctl blocks until all activity of that type has completed. An ioctl was used over other methods of kernel-userspace communiction primarily for the sake of portability. Porting Notes: This is ported from Delphix OS change DLPX-44432. The following changes were made while porting: - Added ZoL-style ioctl input declaration. - Reorganized error handling in zpool_initialize in libzfs to integrate better with changes made for TRIM support. - Fixed check for whether a checkpoint discard is in progress. Previously it also waited if the pool had a checkpoint, instead of just if a checkpoint was being discarded. - Exposed zfs_initialize_chunk_size as a ZoL-style tunable. - Updated more existing tests to make use of new 'zpool wait' functionality, tests that don't exist in Delphix OS. - Used existing ZoL tunable zfs_scan_suspend_progress, together with zinject, in place of a new tunable zfs_scan_max_blks_per_txg. - Added support for a non-integral interval argument to zpool wait. Future work: ZoL has support for trimming devices, which Delphix OS does not. In the future, 'zpool wait' could be extended to add the ability to wait for trim operations to complete. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #9162
2019-09-14 04:09:06 +03:00
nvlist_t *);
_LIBZFS_H int zpool_trim(zpool_handle_t *, pool_trim_func_t, nvlist_t *,
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 19:13:20 +03:00
trimflags_t *);
_LIBZFS_H int zpool_clear(zpool_handle_t *, const char *, nvlist_t *);
_LIBZFS_H int zpool_reguid(zpool_handle_t *);
_LIBZFS_H int zpool_reopen_one(zpool_handle_t *, void *);
2008-11-20 23:01:55 +03:00
_LIBZFS_H int zpool_sync_one(zpool_handle_t *, void *);
_LIBZFS_H int zpool_vdev_online(zpool_handle_t *, const char *, int,
2008-11-20 23:01:55 +03:00
vdev_state_t *);
_LIBZFS_H int zpool_vdev_offline(zpool_handle_t *, const char *, boolean_t);
_LIBZFS_H int zpool_vdev_attach(zpool_handle_t *, const char *,
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 21:05:50 +03:00
const char *, nvlist_t *, int, boolean_t);
_LIBZFS_H int zpool_vdev_detach(zpool_handle_t *, const char *);
_LIBZFS_H int zpool_vdev_remove(zpool_handle_t *, const char *);
_LIBZFS_H int zpool_vdev_remove_cancel(zpool_handle_t *);
_LIBZFS_H int zpool_vdev_indirect_size(zpool_handle_t *, const char *,
uint64_t *);
_LIBZFS_H int zpool_vdev_split(zpool_handle_t *, char *, nvlist_t **,
nvlist_t *, splitflags_t);
_LIBZFS_H int zpool_vdev_remove_wanted(zpool_handle_t *, const char *);
_LIBZFS_H int zpool_vdev_fault(zpool_handle_t *, uint64_t, vdev_aux_t);
_LIBZFS_H int zpool_vdev_degrade(zpool_handle_t *, uint64_t, vdev_aux_t);
_LIBZFS_H int zpool_vdev_clear(zpool_handle_t *, uint64_t);
_LIBZFS_H nvlist_t *zpool_find_vdev(zpool_handle_t *, const char *, boolean_t *,
boolean_t *, boolean_t *);
_LIBZFS_H nvlist_t *zpool_find_vdev_by_physpath(zpool_handle_t *, const char *,
2009-07-03 02:44:48 +04:00
boolean_t *, boolean_t *, boolean_t *);
_LIBZFS_H int zpool_label_disk(libzfs_handle_t *, zpool_handle_t *,
const char *);
_LIBZFS_H uint64_t zpool_vdev_path_to_guid(zpool_handle_t *zhp,
const char *path);
2008-11-20 23:01:55 +03:00
_LIBZFS_H const char *zpool_get_state_str(zpool_handle_t *);
2008-11-20 23:01:55 +03:00
/*
* Functions to manage pool properties
*/
_LIBZFS_H int zpool_set_prop(zpool_handle_t *, const char *, const char *);
_LIBZFS_H int zpool_get_prop(zpool_handle_t *, zpool_prop_t, char *,
size_t proplen, zprop_source_t *, boolean_t literal);
_LIBZFS_H uint64_t zpool_get_prop_int(zpool_handle_t *, zpool_prop_t,
2008-11-20 23:01:55 +03:00
zprop_source_t *);
_LIBZFS_H int zpool_props_refresh(zpool_handle_t *);
2008-11-20 23:01:55 +03:00
_LIBZFS_H const char *zpool_prop_to_name(zpool_prop_t);
_LIBZFS_H const char *zpool_prop_values(zpool_prop_t);
2008-11-20 23:01:55 +03:00
/*
* Functions to manage vdev properties
*/
_LIBZFS_H int zpool_get_vdev_prop_value(nvlist_t *, vdev_prop_t, char *, char *,
size_t, zprop_source_t *, boolean_t);
_LIBZFS_H int zpool_get_vdev_prop(zpool_handle_t *, const char *, vdev_prop_t,
char *, char *, size_t, zprop_source_t *, boolean_t);
_LIBZFS_H int zpool_get_all_vdev_props(zpool_handle_t *, const char *,
nvlist_t **);
_LIBZFS_H int zpool_set_vdev_prop(zpool_handle_t *, const char *, const char *,
const char *);
_LIBZFS_H const char *vdev_prop_to_name(vdev_prop_t);
_LIBZFS_H const char *vdev_prop_values(vdev_prop_t);
_LIBZFS_H boolean_t vdev_prop_user(const char *name);
_LIBZFS_H const char *vdev_prop_column_name(vdev_prop_t);
_LIBZFS_H boolean_t vdev_prop_align_right(vdev_prop_t);
2008-11-20 23:01:55 +03:00
/*
* Pool health statistics.
*/
typedef enum {
/*
* The following correspond to faults as defined in the (fault.fs.zfs.*)
* event namespace. Each is associated with a corresponding message ID.
* This must be kept in sync with the zfs_msgid_table in
* lib/libzfs/libzfs_status.c.
2008-11-20 23:01:55 +03:00
*/
ZPOOL_STATUS_CORRUPT_CACHE, /* corrupt /kernel/drv/zpool.cache */
ZPOOL_STATUS_MISSING_DEV_R, /* missing device with replicas */
ZPOOL_STATUS_MISSING_DEV_NR, /* missing device with no replicas */
ZPOOL_STATUS_CORRUPT_LABEL_R, /* bad device label with replicas */
ZPOOL_STATUS_CORRUPT_LABEL_NR, /* bad device label with no replicas */
ZPOOL_STATUS_BAD_GUID_SUM, /* sum of device guids didn't match */
ZPOOL_STATUS_CORRUPT_POOL, /* pool metadata is corrupted */
ZPOOL_STATUS_CORRUPT_DATA, /* data errors in user (meta)data */
ZPOOL_STATUS_FAILING_DEV, /* device experiencing errors */
ZPOOL_STATUS_VERSION_NEWER, /* newer on-disk version */
ZPOOL_STATUS_HOSTID_MISMATCH, /* last accessed by another system */
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 06:20:35 +03:00
ZPOOL_STATUS_HOSTID_ACTIVE, /* currently active on another system */
ZPOOL_STATUS_HOSTID_REQUIRED, /* multihost=on and hostid=0 */
ZPOOL_STATUS_IO_FAILURE_WAIT, /* failed I/O, failmode 'wait' */
ZPOOL_STATUS_IO_FAILURE_CONTINUE, /* failed I/O, failmode 'continue' */
ZPOOL_STATUS_IO_FAILURE_MMP, /* failed MMP, failmode not 'panic' */
2009-02-18 23:51:31 +03:00
ZPOOL_STATUS_BAD_LOG, /* cannot read log chain(s) */
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 07:57:17 +04:00
ZPOOL_STATUS_ERRATA, /* informational errata available */
2009-02-18 23:51:31 +03:00
/*
* If the pool has unsupported features but can still be opened in
* read-only mode, its status is ZPOOL_STATUS_UNSUP_FEAT_WRITE. If the
* pool has unsupported features but cannot be opened at all, its
* status is ZPOOL_STATUS_UNSUP_FEAT_READ.
*/
ZPOOL_STATUS_UNSUP_FEAT_READ, /* unsupported features for read */
ZPOOL_STATUS_UNSUP_FEAT_WRITE, /* unsupported features for write */
2009-02-18 23:51:31 +03:00
/*
* These faults have no corresponding message ID. At the time we are
* checking the status, the original reason for the FMA fault (I/O or
* checksum errors) has been lost.
*/
2008-11-20 23:01:55 +03:00
ZPOOL_STATUS_FAULTED_DEV_R, /* faulted device with replicas */
ZPOOL_STATUS_FAULTED_DEV_NR, /* faulted device with no replicas */
/*
* The following are not faults per se, but still an error possibly
* requiring administrative attention. There is no corresponding
* message ID.
*/
ZPOOL_STATUS_VERSION_OLDER, /* older legacy on-disk version */
ZPOOL_STATUS_FEAT_DISABLED, /* supported features are disabled */
2008-11-20 23:01:55 +03:00
ZPOOL_STATUS_RESILVERING, /* device being resilvered */
ZPOOL_STATUS_OFFLINE_DEV, /* device offline */
2009-08-18 22:43:27 +04:00
ZPOOL_STATUS_REMOVED_DEV, /* removed device */
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 21:05:50 +03:00
ZPOOL_STATUS_REBUILDING, /* device being rebuilt */
ZPOOL_STATUS_REBUILD_SCRUB, /* recommend scrubbing the pool */
Import vdev ashift optimization from FreeBSD Many modern devices use physical allocation units that are much larger than the minimum logical allocation size accessible by external commands. Two prevalent examples of this are 512e disk drives (512b logical sector, 4K physical sector) and flash devices (512b logical sector, 4K or larger allocation block size, and 128k or larger erase block size). Operations that modify less than the physical sector size result in a costly read-modify-write or garbage collection sequence on these devices. Simply exporting the true physical sector of the device to ZFS would yield optimal performance, but has two serious drawbacks: 1. Existing pools created with devices that have different logical and physical block sizes, but were configured to use the logical block size (e.g. because the OS version used for pool construction reported the logical block size instead of the physical block size) will suddenly find that the vdev allocation size has increased. This can be easily tolerated for active members of the array, but ZFS would prevent replacement of a vdev with another identical device because it now appears that the smaller allocation size required by the pool is not supported by the new device. 2. The device's physical block size may be too large to be supported by ZFS. The optimal allocation size for the vdev may be quite large. For example, a RAID controller may export a vdev that requires read-modify-write cycles unless accessed using 64k aligned/sized requests. ZFS currently has an 8k minimum block size limit. Reporting both the logical and physical allocation sizes for vdevs solves these problems. A device may be used so long as the logical block size is compatible with the configuration. By comparing the logical and physical block sizes, new configurations can be optimized and administrators can be notified of any existing pools that are sub-optimal. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Matthew Macy <mmacy@freebsd.org> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #10619
2020-08-21 22:53:17 +03:00
ZPOOL_STATUS_NON_NATIVE_ASHIFT, /* (e.g. 512e dev with ashift of 9) */
Add "compatibility" property for zpool feature sets Property to allow sets of features to be specified; for compatibility with specific versions / releases / external systems. Influences the behavior of 'zpool upgrade' and 'zpool create'. Initial man page changes and test cases included. Brief synopsis: zpool create -o compatibility=off|legacy|file[,file...] pool vdev... compatibility = off : disable compatibility mode (enable all features) compatibility = legacy : request that no features be enabled compatibility = file[,file...] : read features from specified files. Only features present in *all* files will be enabled on the resulting pool. Filenames may be absolute, or relative to /etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc checked first). Only affects zpool create, zpool upgrade and zpool status. ABI changes in libzfs: * New function "zpool_load_compat" to load and parse compat sets. * Add "zpool_compat_status_t" typedef for compatibility parse status. * Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum * Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum An initial set of base compatibility sets are included in cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is modified to install these in $pkgdatadir/compatibility.d and to create symbolic links to a reasonable set of aliases. Reviewed-by: ericloewe Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Colm Buckley <colm@tuatha.org> Closes #11468
2021-02-18 08:30:45 +03:00
ZPOOL_STATUS_COMPATIBILITY_ERR, /* bad 'compatibility' property */
ZPOOL_STATUS_INCOMPATIBLE_FEAT, /* feature set outside compatibility */
2008-11-20 23:01:55 +03:00
/*
* Finally, the following indicates a healthy pool.
*/
ZPOOL_STATUS_OK
} zpool_status_t;
_LIBZFS_H zpool_status_t zpool_get_status(zpool_handle_t *, const char **,
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 07:57:17 +04:00
zpool_errata_t *);
_LIBZFS_H zpool_status_t zpool_import_status(nvlist_t *, const char **,
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 07:57:17 +04:00
zpool_errata_t *);
2008-11-20 23:01:55 +03:00
/*
* Statistics and configuration functions.
*/
_LIBZFS_H nvlist_t *zpool_get_config(zpool_handle_t *, nvlist_t **);
_LIBZFS_H nvlist_t *zpool_get_features(zpool_handle_t *);
_LIBZFS_H int zpool_refresh_stats(zpool_handle_t *, boolean_t *);
_LIBZFS_H int zpool_get_errlog(zpool_handle_t *, nvlist_t **);
2008-11-20 23:01:55 +03:00
/*
* Import and export functions
*/
_LIBZFS_H int zpool_export(zpool_handle_t *, boolean_t, const char *);
_LIBZFS_H int zpool_export_force(zpool_handle_t *, const char *);
_LIBZFS_H int zpool_import(libzfs_handle_t *, nvlist_t *, const char *,
2008-11-20 23:01:55 +03:00
char *altroot);
_LIBZFS_H int zpool_import_props(libzfs_handle_t *, nvlist_t *, const char *,
nvlist_t *, int);
_LIBZFS_H void zpool_print_unsup_feat(nvlist_t *config);
2008-11-20 23:01:55 +03:00
/*
* Miscellaneous pool functions
*/
struct zfs_cmd;
_LIBZFS_H const char *const zfs_history_event_names[];
typedef enum {
VDEV_NAME_PATH = 1 << 0,
VDEV_NAME_GUID = 1 << 1,
VDEV_NAME_FOLLOW_LINKS = 1 << 2,
VDEV_NAME_TYPE_ID = 1 << 3,
} vdev_name_t;
_LIBZFS_H char *zpool_vdev_name(libzfs_handle_t *, zpool_handle_t *, nvlist_t *,
int name_flags);
_LIBZFS_H int zpool_upgrade(zpool_handle_t *, uint64_t);
_LIBZFS_H int zpool_get_history(zpool_handle_t *, nvlist_t **, uint64_t *,
boolean_t *);
_LIBZFS_H int zpool_events_next(libzfs_handle_t *, nvlist_t **, int *, unsigned,
int);
_LIBZFS_H int zpool_events_clear(libzfs_handle_t *, int *);
_LIBZFS_H int zpool_events_seek(libzfs_handle_t *, uint64_t, int);
_LIBZFS_H void zpool_obj_to_path_ds(zpool_handle_t *, uint64_t, uint64_t,
char *, size_t);
_LIBZFS_H void zpool_obj_to_path(zpool_handle_t *, uint64_t, uint64_t, char *,
size_t);
_LIBZFS_H int zfs_ioctl(libzfs_handle_t *, int, struct zfs_cmd *);
_LIBZFS_H void zpool_explain_recover(libzfs_handle_t *, const char *, int,
nvlist_t *);
_LIBZFS_H int zpool_checkpoint(zpool_handle_t *);
_LIBZFS_H int zpool_discard_checkpoint(zpool_handle_t *);
_LIBZFS_H boolean_t zpool_is_draid_spare(const char *);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
/*
* Basic handle manipulations. These functions do not create or destroy the
* underlying datasets, only the references to them.
*/
_LIBZFS_H zfs_handle_t *zfs_open(libzfs_handle_t *, const char *, int);
_LIBZFS_H zfs_handle_t *zfs_handle_dup(zfs_handle_t *);
_LIBZFS_H void zfs_close(zfs_handle_t *);
_LIBZFS_H zfs_type_t zfs_get_type(const zfs_handle_t *);
_LIBZFS_H zfs_type_t zfs_get_underlying_type(const zfs_handle_t *);
_LIBZFS_H const char *zfs_get_name(const zfs_handle_t *);
_LIBZFS_H zpool_handle_t *zfs_get_pool_handle(const zfs_handle_t *);
_LIBZFS_H const char *zfs_get_pool_name(const zfs_handle_t *);
2008-11-20 23:01:55 +03:00
/*
* Property management functions. Some functions are shared with the kernel,
* and are found in sys/fs/zfs.h.
*/
/*
* zfs dataset property management
*/
_LIBZFS_H const char *zfs_prop_default_string(zfs_prop_t);
_LIBZFS_H uint64_t zfs_prop_default_numeric(zfs_prop_t);
_LIBZFS_H const char *zfs_prop_column_name(zfs_prop_t);
_LIBZFS_H boolean_t zfs_prop_align_right(zfs_prop_t);
2008-11-20 23:01:55 +03:00
_LIBZFS_H nvlist_t *zfs_valid_proplist(libzfs_handle_t *, zfs_type_t,
nvlist_t *, uint64_t, zfs_handle_t *, zpool_handle_t *, boolean_t,
const char *);
_LIBZFS_H const char *zfs_prop_to_name(zfs_prop_t);
_LIBZFS_H int zfs_prop_set(zfs_handle_t *, const char *, const char *);
_LIBZFS_H int zfs_prop_set_list(zfs_handle_t *, nvlist_t *);
_LIBZFS_H int zfs_prop_get(zfs_handle_t *, zfs_prop_t, char *, size_t,
2008-11-20 23:01:55 +03:00
zprop_source_t *, char *, size_t, boolean_t);
_LIBZFS_H int zfs_prop_get_recvd(zfs_handle_t *, const char *, char *, size_t,
boolean_t);
_LIBZFS_H int zfs_prop_get_numeric(zfs_handle_t *, zfs_prop_t, uint64_t *,
2008-11-20 23:01:55 +03:00
zprop_source_t *, char *, size_t);
_LIBZFS_H int zfs_prop_get_userquota_int(zfs_handle_t *zhp,
const char *propname, uint64_t *propvalue);
_LIBZFS_H int zfs_prop_get_userquota(zfs_handle_t *zhp, const char *propname,
2009-07-03 02:44:48 +04:00
char *propbuf, int proplen, boolean_t literal);
_LIBZFS_H int zfs_prop_get_written_int(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue);
_LIBZFS_H int zfs_prop_get_written(zfs_handle_t *zhp, const char *propname,
char *propbuf, int proplen, boolean_t literal);
_LIBZFS_H int zfs_prop_get_feature(zfs_handle_t *zhp, const char *propname,
char *buf, size_t len);
_LIBZFS_H uint64_t getprop_uint64(zfs_handle_t *, zfs_prop_t, char **);
_LIBZFS_H uint64_t zfs_prop_get_int(zfs_handle_t *, zfs_prop_t);
_LIBZFS_H int zfs_prop_inherit(zfs_handle_t *, const char *, boolean_t);
_LIBZFS_H const char *zfs_prop_values(zfs_prop_t);
_LIBZFS_H int zfs_prop_is_string(zfs_prop_t prop);
_LIBZFS_H nvlist_t *zfs_get_all_props(zfs_handle_t *);
_LIBZFS_H nvlist_t *zfs_get_user_props(zfs_handle_t *);
_LIBZFS_H nvlist_t *zfs_get_recvd_props(zfs_handle_t *);
_LIBZFS_H nvlist_t *zfs_get_clones_nvl(zfs_handle_t *);
_LIBZFS_H int zfs_wait_status(zfs_handle_t *, zfs_wait_activity_t,
boolean_t *, boolean_t *);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* zfs encryption management
*/
_LIBZFS_H int zfs_crypto_get_encryption_root(zfs_handle_t *, boolean_t *,
char *);
_LIBZFS_H int zfs_crypto_create(libzfs_handle_t *, char *, nvlist_t *,
nvlist_t *, boolean_t stdin_available, uint8_t **, uint_t *);
_LIBZFS_H int zfs_crypto_clone_check(libzfs_handle_t *, zfs_handle_t *, char *,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
nvlist_t *);
_LIBZFS_H int zfs_crypto_attempt_load_keys(libzfs_handle_t *, const char *);
_LIBZFS_H int zfs_crypto_load_key(zfs_handle_t *, boolean_t, const char *);
_LIBZFS_H int zfs_crypto_unload_key(zfs_handle_t *);
_LIBZFS_H int zfs_crypto_rewrap(zfs_handle_t *, nvlist_t *, boolean_t);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
2008-11-20 23:01:55 +03:00
typedef struct zprop_list {
int pl_prop;
char *pl_user_prop;
struct zprop_list *pl_next;
boolean_t pl_all;
size_t pl_width;
size_t pl_recvd_width;
2008-11-20 23:01:55 +03:00
boolean_t pl_fixed;
} zprop_list_t;
_LIBZFS_H int zfs_expand_proplist(zfs_handle_t *, zprop_list_t **, boolean_t,
boolean_t);
_LIBZFS_H void zfs_prune_proplist(zfs_handle_t *, uint8_t *);
_LIBZFS_H int vdev_expand_proplist(zpool_handle_t *, const char *,
zprop_list_t **);
2008-11-20 23:01:55 +03:00
#define ZFS_MOUNTPOINT_NONE "none"
#define ZFS_MOUNTPOINT_LEGACY "legacy"
#define ZFS_FEATURE_DISABLED "disabled"
#define ZFS_FEATURE_ENABLED "enabled"
#define ZFS_FEATURE_ACTIVE "active"
#define ZFS_UNSUPPORTED_INACTIVE "inactive"
#define ZFS_UNSUPPORTED_READONLY "readonly"
2008-11-20 23:01:55 +03:00
/*
* zpool property management
*/
_LIBZFS_H int zpool_expand_proplist(zpool_handle_t *, zprop_list_t **,
zfs_type_t, boolean_t);
_LIBZFS_H int zpool_prop_get_feature(zpool_handle_t *, const char *, char *,
size_t);
_LIBZFS_H const char *zpool_prop_default_string(zpool_prop_t);
_LIBZFS_H uint64_t zpool_prop_default_numeric(zpool_prop_t);
_LIBZFS_H const char *zpool_prop_column_name(zpool_prop_t);
_LIBZFS_H boolean_t zpool_prop_align_right(zpool_prop_t);
2008-11-20 23:01:55 +03:00
/*
* Functions shared by zfs and zpool property management.
*/
_LIBZFS_H int zprop_iter(zprop_func func, void *cb, boolean_t show_all,
2008-11-20 23:01:55 +03:00
boolean_t ordered, zfs_type_t type);
_LIBZFS_H int zprop_get_list(libzfs_handle_t *, char *, zprop_list_t **,
2008-11-20 23:01:55 +03:00
zfs_type_t);
_LIBZFS_H void zprop_free_list(zprop_list_t *);
2008-11-20 23:01:55 +03:00
#define ZFS_GET_NCOLS 5
typedef enum {
GET_COL_NONE,
GET_COL_NAME,
GET_COL_PROPERTY,
GET_COL_VALUE,
GET_COL_RECVD,
GET_COL_SOURCE
} zfs_get_column_t;
2008-11-20 23:01:55 +03:00
/*
* Functions for printing zfs or zpool properties
*/
typedef struct vdev_cbdata {
int cb_name_flags;
char **cb_names;
unsigned int cb_names_count;
} vdev_cbdata_t;
2008-11-20 23:01:55 +03:00
typedef struct zprop_get_cbdata {
int cb_sources;
zfs_get_column_t cb_columns[ZFS_GET_NCOLS];
int cb_colwidths[ZFS_GET_NCOLS + 1];
2008-11-20 23:01:55 +03:00
boolean_t cb_scripted;
boolean_t cb_literal;
boolean_t cb_first;
zprop_list_t *cb_proplist;
zfs_type_t cb_type;
vdev_cbdata_t cb_vdevs;
2008-11-20 23:01:55 +03:00
} zprop_get_cbdata_t;
_LIBZFS_H void zprop_print_one_property(const char *, zprop_get_cbdata_t *,
const char *, const char *, zprop_source_t, const char *,
const char *);
2008-11-20 23:01:55 +03:00
/*
* Iterator functions.
*/
#define ZFS_ITER_RECURSE (1 << 0)
#define ZFS_ITER_ARGS_CAN_BE_PATHS (1 << 1)
#define ZFS_ITER_PROP_LISTSNAPS (1 << 2)
#define ZFS_ITER_DEPTH_LIMIT (1 << 3)
#define ZFS_ITER_RECVD_PROPS (1 << 4)
#define ZFS_ITER_LITERAL_PROPS (1 << 5)
#define ZFS_ITER_SIMPLE (1 << 6)
2008-11-20 23:01:55 +03:00
typedef int (*zfs_iter_f)(zfs_handle_t *, void *);
_LIBZFS_H int zfs_iter_root(libzfs_handle_t *, zfs_iter_f, void *);
_LIBZFS_H int zfs_iter_children(zfs_handle_t *, int, zfs_iter_f, void *);
_LIBZFS_H int zfs_iter_dependents(zfs_handle_t *, int, boolean_t, zfs_iter_f,
void *);
_LIBZFS_H int zfs_iter_filesystems(zfs_handle_t *, int, zfs_iter_f, void *);
_LIBZFS_H int zfs_iter_snapshots(zfs_handle_t *, int, zfs_iter_f, void *,
uint64_t, uint64_t);
_LIBZFS_H int zfs_iter_snapshots_sorted(zfs_handle_t *, int, zfs_iter_f, void *,
uint64_t, uint64_t);
_LIBZFS_H int zfs_iter_snapspec(zfs_handle_t *, int, const char *, zfs_iter_f,
void *);
_LIBZFS_H int zfs_iter_bookmarks(zfs_handle_t *, int, zfs_iter_f, void *);
_LIBZFS_H int zfs_iter_mounted(zfs_handle_t *, zfs_iter_f, void *);
2008-11-20 23:01:55 +03:00
typedef struct get_all_cb {
zfs_handle_t **cb_handles;
size_t cb_alloc;
size_t cb_used;
} get_all_cb_t;
_LIBZFS_H void zfs_foreach_mountpoint(libzfs_handle_t *, zfs_handle_t **,
size_t, zfs_iter_f, void *, boolean_t);
_LIBZFS_H void libzfs_add_handle(get_all_cb_t *, zfs_handle_t *);
2008-11-20 23:01:55 +03:00
/*
* Functions to create and destroy datasets.
*/
_LIBZFS_H int zfs_create(libzfs_handle_t *, const char *, zfs_type_t,
2008-11-20 23:01:55 +03:00
nvlist_t *);
_LIBZFS_H int zfs_create_ancestors(libzfs_handle_t *, const char *);
_LIBZFS_H int zfs_destroy(zfs_handle_t *, boolean_t);
_LIBZFS_H int zfs_destroy_snaps(zfs_handle_t *, char *, boolean_t);
_LIBZFS_H int zfs_destroy_snaps_nvl(libzfs_handle_t *, nvlist_t *, boolean_t);
_LIBZFS_H int zfs_destroy_snaps_nvl_os(libzfs_handle_t *, nvlist_t *);
_LIBZFS_H int zfs_clone(zfs_handle_t *, const char *, nvlist_t *);
_LIBZFS_H int zfs_snapshot(libzfs_handle_t *, const char *, boolean_t,
nvlist_t *);
_LIBZFS_H int zfs_snapshot_nvl(libzfs_handle_t *hdl, nvlist_t *snaps,
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
nvlist_t *props);
_LIBZFS_H int zfs_rollback(zfs_handle_t *, zfs_handle_t *, boolean_t);
typedef struct renameflags {
/* recursive rename */
unsigned int recursive : 1;
/* don't unmount file systems */
unsigned int nounmount : 1;
/* force unmount file systems */
unsigned int forceunmount : 1;
} renameflags_t;
_LIBZFS_H int zfs_rename(zfs_handle_t *, const char *, renameflags_t);
typedef struct sendflags {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/* Amount of extra information to print. */
int verbosity;
/* recursive send (ie, -R) */
boolean_t replicate;
/* for recursive send, skip sending missing snapshots */
boolean_t skipmissing;
/* for incrementals, do all intermediate snapshots */
boolean_t doall;
/* if dataset is a clone, do incremental from its origin */
boolean_t fromorigin;
/* field no longer used, maintained for backwards compatibility */
boolean_t pad;
/* send properties (ie, -p) */
boolean_t props;
/* do not send (no-op, ie. -n) */
boolean_t dryrun;
/* parsable verbose output (ie. -P) */
boolean_t parsable;
/* show progress (ie. -v) */
boolean_t progress;
/* show progress as process title (ie. -V) */
boolean_t progressastitle;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
/* large blocks (>128K) are permitted */
boolean_t largeblock;
/* WRITE_EMBEDDED records of type DATA are permitted */
boolean_t embed_data;
/* compressed WRITE records are permitted */
boolean_t compress;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/* raw encrypted records are permitted */
boolean_t raw;
/* only send received properties (ie. -b) */
boolean_t backup;
/* include snapshot holds in send stream */
boolean_t holds;
/* stream represents a partially received dataset */
boolean_t saved;
} sendflags_t;
typedef boolean_t (snapfilter_cb_t)(zfs_handle_t *, void *);
_LIBZFS_H int zfs_send(zfs_handle_t *, const char *, const char *,
sendflags_t *, int, snapfilter_cb_t, void *, nvlist_t **);
_LIBZFS_H int zfs_send_one(zfs_handle_t *, const char *, int, sendflags_t *,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
const char *);
_LIBZFS_H int zfs_send_progress(zfs_handle_t *, int, uint64_t *, uint64_t *);
_LIBZFS_H int zfs_send_resume(libzfs_handle_t *, sendflags_t *, int outfd,
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
const char *);
_LIBZFS_H int zfs_send_saved(zfs_handle_t *, sendflags_t *, int, const char *);
_LIBZFS_H nvlist_t *zfs_send_resume_token_to_nvlist(libzfs_handle_t *hdl,
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
const char *token);
_LIBZFS_H int zfs_promote(zfs_handle_t *);
_LIBZFS_H int zfs_hold(zfs_handle_t *, const char *, const char *,
boolean_t, int);
_LIBZFS_H int zfs_hold_nvl(zfs_handle_t *, int, nvlist_t *);
_LIBZFS_H int zfs_release(zfs_handle_t *, const char *, const char *,
boolean_t);
_LIBZFS_H int zfs_get_holds(zfs_handle_t *, nvlist_t **);
_LIBZFS_H uint64_t zvol_volsize_to_reservation(zpool_handle_t *, uint64_t,
nvlist_t *);
2008-11-20 23:01:55 +03:00
2009-07-03 02:44:48 +04:00
typedef int (*zfs_userspace_cb_t)(void *arg, const char *domain,
uid_t rid, uint64_t space);
_LIBZFS_H int zfs_userspace(zfs_handle_t *, zfs_userquota_prop_t,
zfs_userspace_cb_t, void *);
_LIBZFS_H int zfs_get_fsacl(zfs_handle_t *, nvlist_t **);
_LIBZFS_H int zfs_set_fsacl(zfs_handle_t *, boolean_t, nvlist_t *);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
typedef struct recvflags {
/* print informational messages (ie, -v was specified) */
boolean_t verbose;
2008-11-20 23:01:55 +03:00
/* the destination is a prefix, not the exact fs (ie, -d) */
boolean_t isprefix;
2008-11-20 23:01:55 +03:00
/*
* Only the tail of the sent snapshot path is appended to the
* destination to determine the received snapshot name (ie, -e).
*/
boolean_t istail;
2008-11-20 23:01:55 +03:00
/* do not actually do the recv, just check if it would work (ie, -n) */
boolean_t dryrun;
2008-11-20 23:01:55 +03:00
/* rollback/destroy filesystems as necessary (eg, -F) */
boolean_t force;
2008-11-20 23:01:55 +03:00
/* set "canmount=off" on all modified filesystems */
boolean_t canmountoff;
2008-11-20 23:01:55 +03:00
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
/*
* Mark the file systems as "resumable" and do not destroy them if the
* receive is interrupted
*/
boolean_t resumable;
2008-11-20 23:01:55 +03:00
/* byteswap flag is used internally; callers need not specify */
boolean_t byteswap;
2009-02-18 23:51:31 +03:00
/* do not mount file systems as they are extracted (private) */
boolean_t nomount;
/* Was holds flag set in the compound header? */
boolean_t holds;
/* skip receive of snapshot holds */
boolean_t skipholds;
/* mount the filesystem unless nomount is specified */
boolean_t domount;
/* force unmount while recv snapshot (private) */
boolean_t forceunmount;
/* use this recv to check (and heal if needed) an existing snapshot */
boolean_t heal;
2008-11-20 23:01:55 +03:00
} recvflags_t;
_LIBZFS_H int zfs_receive(libzfs_handle_t *, const char *, nvlist_t *,
recvflags_t *, int, avl_tree_t *);
2008-11-20 23:01:55 +03:00
typedef enum diff_flags {
ZFS_DIFF_PARSEABLE = 1 << 0,
ZFS_DIFF_TIMESTAMP = 1 << 1,
ZFS_DIFF_CLASSIFY = 1 << 2,
ZFS_DIFF_NO_MANGLE = 1 << 3
} diff_flags_t;
_LIBZFS_H int zfs_show_diffs(zfs_handle_t *, int, const char *, const char *,
int);
2008-11-20 23:01:55 +03:00
/*
* Miscellaneous functions.
*/
_LIBZFS_H const char *zfs_type_to_name(zfs_type_t);
_LIBZFS_H void zfs_refresh_properties(zfs_handle_t *);
_LIBZFS_H int zfs_name_valid(const char *, zfs_type_t);
_LIBZFS_H zfs_handle_t *zfs_path_to_zhandle(libzfs_handle_t *, const char *,
zfs_type_t);
_LIBZFS_H int zfs_parent_name(zfs_handle_t *, char *, size_t);
_LIBZFS_H boolean_t zfs_dataset_exists(libzfs_handle_t *, const char *,
2008-11-20 23:01:55 +03:00
zfs_type_t);
_LIBZFS_H int zfs_spa_version(zfs_handle_t *, int *);
_LIBZFS_H boolean_t zfs_bookmark_exists(const char *path);
2008-11-20 23:01:55 +03:00
/*
* Mount support functions.
*/
_LIBZFS_H boolean_t is_mounted(libzfs_handle_t *, const char *special, char **);
_LIBZFS_H boolean_t zfs_is_mounted(zfs_handle_t *, char **);
_LIBZFS_H int zfs_mount(zfs_handle_t *, const char *, int);
_LIBZFS_H int zfs_mount_at(zfs_handle_t *, const char *, int, const char *);
_LIBZFS_H int zfs_unmount(zfs_handle_t *, const char *, int);
_LIBZFS_H int zfs_unmountall(zfs_handle_t *, int);
_LIBZFS_H int zfs_mount_delegation_check(void);
2008-11-20 23:01:55 +03:00
#if defined(__linux__) || defined(__APPLE__)
_LIBZFS_H int zfs_parse_mount_options(const char *mntopts,
unsigned long *mntflags, unsigned long *zfsflags, int sloppy, char *badopt,
char *mtabopt);
_LIBZFS_H void zfs_adjust_mount_options(zfs_handle_t *zhp, const char *mntpoint,
char *mntopts, char *mtabopt);
#endif
2008-11-20 23:01:55 +03:00
/*
* Share support functions.
*
* enum sa_protocol * lists are terminated with SA_NO_PROTOCOL,
* NULL means "all/any known to this libzfs".
2008-11-20 23:01:55 +03:00
*/
#define SA_NO_PROTOCOL -1
2008-11-20 23:01:55 +03:00
_LIBZFS_H boolean_t zfs_is_shared(zfs_handle_t *zhp, char **where,
const enum sa_protocol *proto);
_LIBZFS_H int zfs_share(zfs_handle_t *zhp, const enum sa_protocol *proto);
_LIBZFS_H int zfs_unshare(zfs_handle_t *zhp, const char *mountpoint,
const enum sa_protocol *proto);
_LIBZFS_H int zfs_unshareall(zfs_handle_t *zhp,
const enum sa_protocol *proto);
_LIBZFS_H void zfs_commit_shares(const enum sa_protocol *proto);
_LIBZFS_H void zfs_truncate_shares(const enum sa_protocol *proto);
2008-11-20 23:01:55 +03:00
_LIBZFS_H int zfs_nicestrtonum(libzfs_handle_t *, const char *, uint64_t *);
2008-11-20 23:01:55 +03:00
/*
* Utility functions to run an external process.
*/
#define STDOUT_VERBOSE 0x01
#define STDERR_VERBOSE 0x02
2017-04-21 19:27:04 +03:00
#define NO_DEFAULT_PATH 0x04 /* Don't use $PATH to lookup the command */
_LIBZFS_H int libzfs_run_process(const char *, char **, int);
_LIBZFS_H int libzfs_run_process_get_stdout(const char *, char *[], char *[],
char **[], int *);
_LIBZFS_H int libzfs_run_process_get_stdout_nopath(const char *, char *[],
char *[], char **[], int *);
2017-04-21 19:27:04 +03:00
_LIBZFS_H void libzfs_free_str_array(char **, int);
2017-04-21 19:27:04 +03:00
_LIBZFS_H boolean_t libzfs_envvar_is_set(const char *);
/*
* Utility functions for zfs version
*/
_LIBZFS_H const char *zfs_version_userland(void);
_LIBZFS_H char *zfs_version_kernel(void);
_LIBZFS_H int zfs_version_print(void);
2008-11-20 23:01:55 +03:00
/*
* Given a device or file, determine if it is part of a pool.
*/
_LIBZFS_H int zpool_in_use(libzfs_handle_t *, int, pool_state_t *, char **,
2008-11-20 23:01:55 +03:00
boolean_t *);
/*
* Label manipulation.
2008-11-20 23:01:55 +03:00
*/
_LIBZFS_H int zpool_clear_label(int);
_LIBZFS_H int zpool_set_bootenv(zpool_handle_t *, const nvlist_t *);
_LIBZFS_H int zpool_get_bootenv(zpool_handle_t *, nvlist_t **);
2008-11-20 23:01:55 +03:00
2009-07-03 02:44:48 +04:00
/*
* Management interfaces for SMB ACL files
*/
_LIBZFS_H int zfs_smb_acl_add(libzfs_handle_t *, char *, char *, char *);
_LIBZFS_H int zfs_smb_acl_remove(libzfs_handle_t *, char *, char *, char *);
_LIBZFS_H int zfs_smb_acl_purge(libzfs_handle_t *, char *, char *);
_LIBZFS_H int zfs_smb_acl_rename(libzfs_handle_t *, char *, char *, char *,
char *);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
/*
* Enable and disable datasets within a pool by mounting/unmounting and
* sharing/unsharing them.
*/
_LIBZFS_H int zpool_enable_datasets(zpool_handle_t *, const char *, int);
_LIBZFS_H int zpool_disable_datasets(zpool_handle_t *, boolean_t);
_LIBZFS_H void zpool_disable_datasets_os(zpool_handle_t *, boolean_t);
_LIBZFS_H void zpool_disable_volume_os(const char *);
2008-11-20 23:01:55 +03:00
Add "compatibility" property for zpool feature sets Property to allow sets of features to be specified; for compatibility with specific versions / releases / external systems. Influences the behavior of 'zpool upgrade' and 'zpool create'. Initial man page changes and test cases included. Brief synopsis: zpool create -o compatibility=off|legacy|file[,file...] pool vdev... compatibility = off : disable compatibility mode (enable all features) compatibility = legacy : request that no features be enabled compatibility = file[,file...] : read features from specified files. Only features present in *all* files will be enabled on the resulting pool. Filenames may be absolute, or relative to /etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc checked first). Only affects zpool create, zpool upgrade and zpool status. ABI changes in libzfs: * New function "zpool_load_compat" to load and parse compat sets. * Add "zpool_compat_status_t" typedef for compatibility parse status. * Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum * Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum An initial set of base compatibility sets are included in cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is modified to install these in $pkgdatadir/compatibility.d and to create symbolic links to a reasonable set of aliases. Reviewed-by: ericloewe Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Colm Buckley <colm@tuatha.org> Closes #11468
2021-02-18 08:30:45 +03:00
/*
* Parse a features file for -o compatibility
*/
typedef enum {
ZPOOL_COMPATIBILITY_OK,
ZPOOL_COMPATIBILITY_WARNTOKEN,
ZPOOL_COMPATIBILITY_BADTOKEN,
Add "compatibility" property for zpool feature sets Property to allow sets of features to be specified; for compatibility with specific versions / releases / external systems. Influences the behavior of 'zpool upgrade' and 'zpool create'. Initial man page changes and test cases included. Brief synopsis: zpool create -o compatibility=off|legacy|file[,file...] pool vdev... compatibility = off : disable compatibility mode (enable all features) compatibility = legacy : request that no features be enabled compatibility = file[,file...] : read features from specified files. Only features present in *all* files will be enabled on the resulting pool. Filenames may be absolute, or relative to /etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc checked first). Only affects zpool create, zpool upgrade and zpool status. ABI changes in libzfs: * New function "zpool_load_compat" to load and parse compat sets. * Add "zpool_compat_status_t" typedef for compatibility parse status. * Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum * Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum An initial set of base compatibility sets are included in cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is modified to install these in $pkgdatadir/compatibility.d and to create symbolic links to a reasonable set of aliases. Reviewed-by: ericloewe Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Colm Buckley <colm@tuatha.org> Closes #11468
2021-02-18 08:30:45 +03:00
ZPOOL_COMPATIBILITY_BADFILE,
ZPOOL_COMPATIBILITY_NOFILES
} zpool_compat_status_t;
_LIBZFS_H zpool_compat_status_t zpool_load_compat(const char *,
boolean_t *, char *, size_t);
Add "compatibility" property for zpool feature sets Property to allow sets of features to be specified; for compatibility with specific versions / releases / external systems. Influences the behavior of 'zpool upgrade' and 'zpool create'. Initial man page changes and test cases included. Brief synopsis: zpool create -o compatibility=off|legacy|file[,file...] pool vdev... compatibility = off : disable compatibility mode (enable all features) compatibility = legacy : request that no features be enabled compatibility = file[,file...] : read features from specified files. Only features present in *all* files will be enabled on the resulting pool. Filenames may be absolute, or relative to /etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc checked first). Only affects zpool create, zpool upgrade and zpool status. ABI changes in libzfs: * New function "zpool_load_compat" to load and parse compat sets. * Add "zpool_compat_status_t" typedef for compatibility parse status. * Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum * Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum An initial set of base compatibility sets are included in cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is modified to install these in $pkgdatadir/compatibility.d and to create symbolic links to a reasonable set of aliases. Reviewed-by: ericloewe Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Colm Buckley <colm@tuatha.org> Closes #11468
2021-02-18 08:30:45 +03:00
#ifdef __FreeBSD__
/*
* Attach/detach the given filesystem to/from the given jail.
*/
_LIBZFS_H int zfs_jail(zfs_handle_t *zhp, int jailid, int attach);
/*
* Set loader options for next boot.
*/
_LIBZFS_H int zpool_nextboot(libzfs_handle_t *, uint64_t, uint64_t,
const char *);
#endif /* __FreeBSD__ */
#ifdef __linux__
/*
* Add or delete the given filesystem to/from the given user namespace.
*/
_LIBZFS_H int zfs_userns(zfs_handle_t *zhp, const char *nspath, int attach);
#endif
2008-11-20 23:01:55 +03:00
#ifdef __cplusplus
}
#endif
#endif /* _LIBZFS_H */