mirror_zfs/module/zfs/spa_errlog.c

1343 lines
36 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
2008-11-20 23:01:55 +03:00
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
* Copyright (c) 2013, 2014, Delphix. All rights reserved.
* Copyright (c) 2019 Datto Inc.
* Copyright (c) 2021, 2022, George Amanakis. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
/*
* Routines to manage the on-disk persistent error log.
*
* Each pool stores a log of all logical data errors seen during normal
* operation. This is actually the union of two distinct logs: the last log,
* and the current log. All errors seen are logged to the current log. When a
* scrub completes, the current log becomes the last log, the last log is thrown
* out, and the current log is reinitialized. This way, if an error is somehow
* corrected, a new scrub will show that it no longer exists, and will be
2008-11-20 23:01:55 +03:00
* deleted from the log when the scrub completes.
*
* The log is stored using a ZAP object whose key is a string form of the
* zbookmark_phys tuple (objset, object, level, blkid), and whose contents is an
2008-11-20 23:01:55 +03:00
* optional 'objset:object' human-readable string describing the data. When an
* error is first logged, this string will be empty, indicating that no name is
* known. This prevents us from having to issue a potentially large amount of
* I/O to discover the object name during an error path. Instead, we do the
* calculation when the data is requested, storing the result so future queries
* will be faster.
*
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
* If the head_errlog feature is enabled, a different on-disk format is used.
* The error log of each head dataset is stored separately in the zap object
* and keyed by the head id. This enables listing every dataset affected in
* userland. In order to be able to track whether an error block has been
* modified or added to snapshots since it was marked as an error, a new tuple
* is introduced: zbookmark_err_phys_t. It allows the storage of the birth
* transaction group of an error block on-disk. The birth transaction group is
* used by check_filesystem() to assess whether this block was freed,
* re-written or added to a snapshot since its marking as an error.
*
2008-11-20 23:01:55 +03:00
* This log is then shipped into an nvlist where the key is the dataset name and
* the value is the object name. Userland is then responsible for uniquifying
* this list and displaying it to the user.
*/
#include <sys/dmu_tx.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/zap.h>
#include <sys/zio.h>
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
#include <sys/dsl_dir.h>
#include <sys/dmu_objset.h>
#include <sys/dbuf.h>
#include <sys/zfs_znode.h>
2008-11-20 23:01:55 +03:00
#define NAME_MAX_LEN 64
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
* spa_upgrade_errlog_limit : A zfs module parameter that controls the number
* of on-disk error log entries that will be converted to the new
* format when enabling head_errlog. Defaults to 0 which converts
* all log entries.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*/
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
static uint_t spa_upgrade_errlog_limit = 0;
2008-11-20 23:01:55 +03:00
/*
* Convert a bookmark to a string.
*/
static void
bookmark_to_name(zbookmark_phys_t *zb, char *buf, size_t len)
2008-11-20 23:01:55 +03:00
{
(void) snprintf(buf, len, "%llx:%llx:%llx:%llx",
(u_longlong_t)zb->zb_objset, (u_longlong_t)zb->zb_object,
(u_longlong_t)zb->zb_level, (u_longlong_t)zb->zb_blkid);
}
/*
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
* Convert an err_phys to a string.
*/
static void
errphys_to_name(zbookmark_err_phys_t *zep, char *buf, size_t len)
{
(void) snprintf(buf, len, "%llx:%llx:%llx:%llx",
(u_longlong_t)zep->zb_object, (u_longlong_t)zep->zb_level,
(u_longlong_t)zep->zb_blkid, (u_longlong_t)zep->zb_birth);
}
/*
* Convert a string to a err_phys.
*/
static void
name_to_errphys(char *buf, zbookmark_err_phys_t *zep)
{
zep->zb_object = zfs_strtonum(buf, &buf);
ASSERT(*buf == ':');
zep->zb_level = (int)zfs_strtonum(buf + 1, &buf);
ASSERT(*buf == ':');
zep->zb_blkid = zfs_strtonum(buf + 1, &buf);
ASSERT(*buf == ':');
zep->zb_birth = zfs_strtonum(buf + 1, &buf);
ASSERT(*buf == '\0');
}
/*
* Convert a string to a bookmark.
2008-11-20 23:01:55 +03:00
*/
static void
name_to_bookmark(char *buf, zbookmark_phys_t *zb)
2008-11-20 23:01:55 +03:00
{
zb->zb_objset = zfs_strtonum(buf, &buf);
2008-11-20 23:01:55 +03:00
ASSERT(*buf == ':');
zb->zb_object = zfs_strtonum(buf + 1, &buf);
2008-11-20 23:01:55 +03:00
ASSERT(*buf == ':');
zb->zb_level = (int)zfs_strtonum(buf + 1, &buf);
2008-11-20 23:01:55 +03:00
ASSERT(*buf == ':');
zb->zb_blkid = zfs_strtonum(buf + 1, &buf);
2008-11-20 23:01:55 +03:00
ASSERT(*buf == '\0');
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
#ifdef _KERNEL
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
static int check_clones(spa_t *spa, uint64_t zap_clone, uint64_t snap_count,
uint64_t *snap_obj_array, zbookmark_err_phys_t *zep, void* uaddr,
uint64_t *count);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
static void
zep_to_zb(uint64_t dataset, zbookmark_err_phys_t *zep, zbookmark_phys_t *zb)
{
zb->zb_objset = dataset;
zb->zb_object = zep->zb_object;
zb->zb_level = zep->zb_level;
zb->zb_blkid = zep->zb_blkid;
}
2008-11-20 23:01:55 +03:00
#endif
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
static void
name_to_object(char *buf, uint64_t *obj)
{
*obj = zfs_strtonum(buf, &buf);
ASSERT(*buf == '\0');
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* Retrieve the head filesystem.
*/
static int get_head_ds(spa_t *spa, uint64_t dsobj, uint64_t *head_ds)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
{
dsl_dataset_t *ds;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
int error = dsl_dataset_hold_obj(spa->spa_dsl_pool,
dsobj, FTAG, &ds);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
if (error != 0)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
return (error);
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
ASSERT(head_ds);
*head_ds = dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
dsl_dataset_rele(ds, FTAG);
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
return (error);
}
2008-11-20 23:01:55 +03:00
/*
* Log an uncorrectable error to the persistent error log. We add it to the
* spa's list of pending errors. The changes are actually synced out to disk
* during spa_errlog_sync().
*/
void
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
spa_log_error(spa_t *spa, const zbookmark_phys_t *zb, const uint64_t *birth)
2008-11-20 23:01:55 +03:00
{
spa_error_entry_t search;
spa_error_entry_t *new;
avl_tree_t *tree;
avl_index_t where;
/*
* If we are trying to import a pool, ignore any errors, as we won't be
* writing to the pool any time soon.
*/
if (spa_load_state(spa) == SPA_LOAD_TRYIMPORT)
2008-11-20 23:01:55 +03:00
return;
mutex_enter(&spa->spa_errlist_lock);
/*
* If we have had a request to rotate the log, log it to the next list
* instead of the current one.
*/
if (spa->spa_scrub_active || spa->spa_scrub_finished)
tree = &spa->spa_errlist_scrub;
else
tree = &spa->spa_errlist_last;
search.se_bookmark = *zb;
if (avl_find(tree, &search, &where) != NULL) {
mutex_exit(&spa->spa_errlist_lock);
return;
}
new = kmem_zalloc(sizeof (spa_error_entry_t), KM_SLEEP);
new->se_bookmark = *zb;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* If the head_errlog feature is enabled, store the birth txg now. In
* case the file is deleted before spa_errlog_sync() runs, we will not
* be able to retrieve the birth txg.
*/
if (spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
new->se_zep.zb_object = zb->zb_object;
new->se_zep.zb_level = zb->zb_level;
new->se_zep.zb_blkid = zb->zb_blkid;
/*
* birth may end up being NULL, e.g. in zio_done(). We
* will handle this in process_error_block().
*/
if (birth != NULL)
new->se_zep.zb_birth = *birth;
}
avl_insert(tree, new, where);
2008-11-20 23:01:55 +03:00
mutex_exit(&spa->spa_errlist_lock);
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
#ifdef _KERNEL
static int
find_birth_txg(dsl_dataset_t *ds, zbookmark_err_phys_t *zep,
uint64_t *birth_txg)
{
objset_t *os;
int error = dmu_objset_from_ds(ds, &os);
if (error != 0)
return (error);
dnode_t *dn;
blkptr_t bp;
error = dnode_hold(os, zep->zb_object, FTAG, &dn);
if (error != 0)
return (error);
rw_enter(&dn->dn_struct_rwlock, RW_READER);
error = dbuf_dnode_findbp(dn, zep->zb_level, zep->zb_blkid, &bp, NULL,
NULL);
if (error == 0 && BP_IS_HOLE(&bp))
error = SET_ERROR(ENOENT);
*birth_txg = bp.blk_birth;
rw_exit(&dn->dn_struct_rwlock);
dnode_rele(dn, FTAG);
return (error);
}
/*
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
* Copy the bookmark to the end of the user-space buffer which starts at
* uaddr and has *count unused entries, and decrement *count by 1.
*/
static int
copyout_entry(const zbookmark_phys_t *zb, void *uaddr, uint64_t *count)
{
if (*count == 0)
return (SET_ERROR(ENOMEM));
*count -= 1;
if (copyout(zb, (char *)uaddr + (*count) * sizeof (zbookmark_phys_t),
sizeof (zbookmark_phys_t)) != 0)
return (SET_ERROR(EFAULT));
return (0);
}
/*
* Each time the error block is referenced by a snapshot or clone, add a
* zbookmark_phys_t entry to the userspace array at uaddr. The array is
* filled from the back and the in-out parameter *count is modified to be the
* number of unused entries at the beginning of the array.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*/
static int
check_filesystem(spa_t *spa, uint64_t head_ds, zbookmark_err_phys_t *zep,
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
void *uaddr, uint64_t *count)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
{
dsl_dataset_t *ds;
dsl_pool_t *dp = spa->spa_dsl_pool;
int error = dsl_dataset_hold_obj(dp, head_ds, FTAG, &ds);
if (error != 0)
return (error);
uint64_t latest_txg;
uint64_t txg_to_consider = spa->spa_syncing_txg;
boolean_t check_snapshot = B_TRUE;
error = find_birth_txg(ds, zep, &latest_txg);
/*
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* If the filesystem is encrypted and the key is not loaded
* or the encrypted filesystem is not mounted the error will be EACCES.
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* In that case report an error in the head filesystem and return.
*/
if (error == EACCES) {
dsl_dataset_rele(ds, FTAG);
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
zbookmark_phys_t zb;
zep_to_zb(head_ds, zep, &zb);
error = copyout_entry(&zb, uaddr, count);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
return (0);
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* If find_birth_txg() errors out otherwise, let txg_to_consider be
* equal to the spa's syncing txg: if check_filesystem() errors out
* then affected snapshots or clones will not be checked.
*/
if (error == 0 && zep->zb_birth == latest_txg) {
/* Block neither free nor rewritten. */
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
zbookmark_phys_t zb;
zep_to_zb(head_ds, zep, &zb);
error = copyout_entry(&zb, uaddr, count);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
check_snapshot = B_FALSE;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
} else if (error == 0) {
txg_to_consider = latest_txg;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* Retrieve the number of snapshots if the dataset is not a snapshot.
*/
uint64_t snap_count = 0;
if (dsl_dataset_phys(ds)->ds_snapnames_zapobj != 0) {
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
error = zap_count(spa->spa_meta_objset,
dsl_dataset_phys(ds)->ds_snapnames_zapobj, &snap_count);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
if (snap_count == 0) {
/* Filesystem without snapshots. */
dsl_dataset_rele(ds, FTAG);
return (0);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
uint64_t *snap_obj_array = kmem_zalloc(snap_count * sizeof (uint64_t),
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
KM_SLEEP);
int aff_snap_count = 0;
uint64_t snap_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
uint64_t snap_obj_txg = dsl_dataset_phys(ds)->ds_prev_snap_txg;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
uint64_t zap_clone = dsl_dir_phys(ds->ds_dir)->dd_clones;
dsl_dataset_rele(ds, FTAG);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/* Check only snapshots created from this file system. */
while (snap_obj != 0 && zep->zb_birth < snap_obj_txg &&
snap_obj_txg <= txg_to_consider) {
error = dsl_dataset_hold_obj(dp, snap_obj, FTAG, &ds);
if (error != 0)
goto out;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
if (dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj != head_ds) {
snap_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
snap_obj_txg = dsl_dataset_phys(ds)->ds_prev_snap_txg;
dsl_dataset_rele(ds, FTAG);
continue;
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
boolean_t affected = B_TRUE;
if (check_snapshot) {
uint64_t blk_txg;
error = find_birth_txg(ds, zep, &blk_txg);
affected = (error == 0 && zep->zb_birth == blk_txg);
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/* Report errors in snapshots. */
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (affected) {
snap_obj_array[aff_snap_count] = snap_obj;
aff_snap_count++;
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
zbookmark_phys_t zb;
zep_to_zb(snap_obj, zep, &zb);
error = copyout_entry(&zb, uaddr, count);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
goto out;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
}
snap_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
snap_obj_txg = dsl_dataset_phys(ds)->ds_prev_snap_txg;
dsl_dataset_rele(ds, FTAG);
}
if (zap_clone != 0 && aff_snap_count > 0) {
error = check_clones(spa, zap_clone, snap_count, snap_obj_array,
zep, uaddr, count);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
out:
kmem_free(snap_obj_array, sizeof (*snap_obj_array));
return (error);
}
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* Clone checking.
*/
static int check_clones(spa_t *spa, uint64_t zap_clone, uint64_t snap_count,
uint64_t *snap_obj_array, zbookmark_err_phys_t *zep, void* uaddr,
uint64_t *count)
{
int error = 0;
zap_cursor_t *zc;
zap_attribute_t *za;
zc = kmem_zalloc(sizeof (zap_cursor_t), KM_SLEEP);
za = kmem_zalloc(sizeof (zap_attribute_t), KM_SLEEP);
for (zap_cursor_init(zc, spa->spa_meta_objset, zap_clone);
zap_cursor_retrieve(zc, za) == 0;
zap_cursor_advance(zc)) {
dsl_pool_t *dp = spa->spa_dsl_pool;
dsl_dataset_t *clone;
error = dsl_dataset_hold_obj(dp, za->za_first_integer,
FTAG, &clone);
if (error != 0)
break;
/*
* Only clones whose origins were affected could also
* have affected snapshots.
*/
boolean_t found = B_FALSE;
for (int i = 0; i < snap_count; i++) {
if (dsl_dir_phys(clone->ds_dir)->dd_origin_obj
== snap_obj_array[i])
found = B_TRUE;
}
dsl_dataset_rele(clone, FTAG);
if (!found)
continue;
error = check_filesystem(spa, za->za_first_integer, zep,
uaddr, count);
if (error != 0)
break;
}
zap_cursor_fini(zc);
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
kmem_free(za, sizeof (*za));
kmem_free(zc, sizeof (*zc));
return (error);
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
static int
find_top_affected_fs(spa_t *spa, uint64_t head_ds, zbookmark_err_phys_t *zep,
uint64_t *top_affected_fs)
{
uint64_t oldest_dsobj;
int error = dsl_dataset_oldest_snapshot(spa, head_ds, zep->zb_birth,
&oldest_dsobj);
if (error != 0)
return (error);
dsl_dataset_t *ds;
error = dsl_dataset_hold_obj(spa->spa_dsl_pool, oldest_dsobj,
FTAG, &ds);
if (error != 0)
return (error);
*top_affected_fs =
dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj;
dsl_dataset_rele(ds, FTAG);
return (0);
}
static int
process_error_block(spa_t *spa, uint64_t head_ds, zbookmark_err_phys_t *zep,
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
void *uaddr, uint64_t *count)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
{
/*
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* If zb_birth == 0 or head_ds == 0 it means we failed to retrieve the
* birth txg or the head filesystem of the block pointer. This may
* happen e.g. when an encrypted filesystem is not mounted or when
* the key is not loaded. In this case do not proceed to
* check_filesystem(), instead do the accounting here.
*/
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
if (zep->zb_birth == 0 || head_ds == 0) {
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
zbookmark_phys_t zb;
zep_to_zb(head_ds, zep, &zb);
int error = copyout_entry(&zb, uaddr, count);
if (error != 0) {
return (error);
}
return (0);
}
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
uint64_t top_affected_fs;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
int error = find_top_affected_fs(spa, head_ds, zep, &top_affected_fs);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
if (error == 0) {
error = check_filesystem(spa, top_affected_fs, zep,
uaddr, count);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
return (error);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
#endif
/*
* If a healed bookmark matches an entry in the error log we stash it in a tree
* so that we can later remove the related log entries in sync context.
*/
static void
spa_add_healed_error(spa_t *spa, uint64_t obj, zbookmark_phys_t *healed_zb)
{
char name[NAME_MAX_LEN];
if (obj == 0)
return;
bookmark_to_name(healed_zb, name, sizeof (name));
mutex_enter(&spa->spa_errlog_lock);
if (zap_contains(spa->spa_meta_objset, obj, name) == 0) {
/*
* Found an error matching healed zb, add zb to our
* tree of healed errors
*/
avl_tree_t *tree = &spa->spa_errlist_healed;
spa_error_entry_t search;
spa_error_entry_t *new;
avl_index_t where;
search.se_bookmark = *healed_zb;
mutex_enter(&spa->spa_errlist_lock);
if (avl_find(tree, &search, &where) != NULL) {
mutex_exit(&spa->spa_errlist_lock);
mutex_exit(&spa->spa_errlog_lock);
return;
}
new = kmem_zalloc(sizeof (spa_error_entry_t), KM_SLEEP);
new->se_bookmark = *healed_zb;
avl_insert(tree, new, where);
mutex_exit(&spa->spa_errlist_lock);
}
mutex_exit(&spa->spa_errlog_lock);
}
/*
* If this error exists in the given tree remove it.
*/
static void
remove_error_from_list(spa_t *spa, avl_tree_t *t, const zbookmark_phys_t *zb)
{
spa_error_entry_t search, *found;
avl_index_t where;
mutex_enter(&spa->spa_errlist_lock);
search.se_bookmark = *zb;
if ((found = avl_find(t, &search, &where)) != NULL) {
avl_remove(t, found);
kmem_free(found, sizeof (spa_error_entry_t));
}
mutex_exit(&spa->spa_errlist_lock);
}
/*
* Removes all of the recv healed errors from both on-disk error logs
*/
static void
spa_remove_healed_errors(spa_t *spa, avl_tree_t *s, avl_tree_t *l, dmu_tx_t *tx)
{
char name[NAME_MAX_LEN];
spa_error_entry_t *se;
void *cookie = NULL;
ASSERT(MUTEX_HELD(&spa->spa_errlog_lock));
while ((se = avl_destroy_nodes(&spa->spa_errlist_healed,
&cookie)) != NULL) {
remove_error_from_list(spa, s, &se->se_bookmark);
remove_error_from_list(spa, l, &se->se_bookmark);
bookmark_to_name(&se->se_bookmark, name, sizeof (name));
kmem_free(se, sizeof (spa_error_entry_t));
(void) zap_remove(spa->spa_meta_objset,
spa->spa_errlog_last, name, tx);
(void) zap_remove(spa->spa_meta_objset,
spa->spa_errlog_scrub, name, tx);
}
}
/*
* Stash away healed bookmarks to remove them from the on-disk error logs
* later in spa_remove_healed_errors().
*/
void
spa_remove_error(spa_t *spa, zbookmark_phys_t *zb)
{
char name[NAME_MAX_LEN];
bookmark_to_name(zb, name, sizeof (name));
spa_add_healed_error(spa, spa->spa_errlog_last, zb);
spa_add_healed_error(spa, spa->spa_errlog_scrub, zb);
}
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
static uint64_t
approx_errlog_size_impl(spa_t *spa, uint64_t spa_err_obj)
{
if (spa_err_obj == 0)
return (0);
uint64_t total = 0;
zap_cursor_t zc;
zap_attribute_t za;
for (zap_cursor_init(&zc, spa->spa_meta_objset, spa_err_obj);
zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) {
uint64_t count;
if (zap_count(spa->spa_meta_objset, za.za_first_integer,
&count) == 0)
total += count;
}
zap_cursor_fini(&zc);
return (total);
}
2008-11-20 23:01:55 +03:00
/*
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
* Return the approximate number of errors currently in the error log. This
* will be nonzero if there are some errors, but otherwise it may be more
* or less than the number of entries returned by spa_get_errlog().
2008-11-20 23:01:55 +03:00
*/
uint64_t
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
spa_approx_errlog_size(spa_t *spa)
2008-11-20 23:01:55 +03:00
{
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
uint64_t total = 0;
if (!spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
mutex_enter(&spa->spa_errlog_lock);
uint64_t count;
if (spa->spa_errlog_scrub != 0 &&
zap_count(spa->spa_meta_objset, spa->spa_errlog_scrub,
&count) == 0)
total += count;
if (spa->spa_errlog_last != 0 && !spa->spa_scrub_finished &&
zap_count(spa->spa_meta_objset, spa->spa_errlog_last,
&count) == 0)
total += count;
mutex_exit(&spa->spa_errlog_lock);
} else {
mutex_enter(&spa->spa_errlog_lock);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
total += approx_errlog_size_impl(spa, spa->spa_errlog_last);
total += approx_errlog_size_impl(spa, spa->spa_errlog_scrub);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
mutex_exit(&spa->spa_errlog_lock);
}
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
mutex_enter(&spa->spa_errlist_lock);
total += avl_numnodes(&spa->spa_errlist_last);
total += avl_numnodes(&spa->spa_errlist_scrub);
mutex_exit(&spa->spa_errlist_lock);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
return (total);
}
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
* This function sweeps through an on-disk error log and stores all bookmarks
* as error bookmarks in a new ZAP object. At the end we discard the old one,
* and spa_update_errlog() will set the spa's on-disk error log to new ZAP
* object.
*/
static void
sync_upgrade_errlog(spa_t *spa, uint64_t spa_err_obj, uint64_t *newobj,
dmu_tx_t *tx)
{
zap_cursor_t zc;
zap_attribute_t za;
zbookmark_phys_t zb;
uint64_t count;
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*newobj = zap_create(spa->spa_meta_objset, DMU_OT_ERROR_LOG,
DMU_OT_NONE, 0, tx);
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
* If we cannnot perform the upgrade we should clear the old on-disk
* error logs.
*/
if (zap_count(spa->spa_meta_objset, spa_err_obj, &count) != 0) {
VERIFY0(dmu_object_free(spa->spa_meta_objset, spa_err_obj, tx));
return;
}
for (zap_cursor_init(&zc, spa->spa_meta_objset, spa_err_obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
if (spa_upgrade_errlog_limit != 0 &&
zc.zc_cd == spa_upgrade_errlog_limit)
break;
name_to_bookmark(za.za_name, &zb);
zbookmark_err_phys_t zep;
zep.zb_object = zb.zb_object;
zep.zb_level = zb.zb_level;
zep.zb_blkid = zb.zb_blkid;
zep.zb_birth = 0;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* In case of an error we should simply continue instead of
* returning prematurely. See the next comment.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*/
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
uint64_t head_ds;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
dsl_pool_t *dp = spa->spa_dsl_pool;
dsl_dataset_t *ds;
objset_t *os;
int error = dsl_dataset_hold_obj(dp, zb.zb_objset, FTAG, &ds);
if (error != 0)
continue;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
head_ds = dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
* The objset and the dnode are required for getting the block
* pointer, which is used to determine if BP_IS_HOLE(). If
* getting the objset or the dnode fails, do not create a
* zap entry (presuming we know the dataset) as this may create
* spurious errors that we cannot ever resolve. If an error is
* truly persistent, it should re-appear after a scan.
*/
if (dmu_objset_from_ds(ds, &os) != 0) {
dsl_dataset_rele(ds, FTAG);
continue;
}
dnode_t *dn;
blkptr_t bp;
if (dnode_hold(os, zep.zb_object, FTAG, &dn) != 0) {
dsl_dataset_rele(ds, FTAG);
continue;
}
rw_enter(&dn->dn_struct_rwlock, RW_READER);
error = dbuf_dnode_findbp(dn, zep.zb_level, zep.zb_blkid, &bp,
NULL, NULL);
if (error == EACCES)
error = 0;
else if (!error)
zep.zb_birth = bp.blk_birth;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
rw_exit(&dn->dn_struct_rwlock);
dnode_rele(dn, FTAG);
dsl_dataset_rele(ds, FTAG);
if (error != 0 || BP_IS_HOLE(&bp))
continue;
uint64_t err_obj;
error = zap_lookup_int_key(spa->spa_meta_objset, *newobj,
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
head_ds, &err_obj);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (error == ENOENT) {
err_obj = zap_create(spa->spa_meta_objset,
DMU_OT_ERROR_LOG, DMU_OT_NONE, 0, tx);
(void) zap_update_int_key(spa->spa_meta_objset,
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
*newobj, head_ds, err_obj, tx);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
char buf[64];
errphys_to_name(&zep, buf, sizeof (buf));
const char *name = "";
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
(void) zap_update(spa->spa_meta_objset, err_obj,
buf, 1, strlen(name) + 1, name, tx);
}
zap_cursor_fini(&zc);
VERIFY0(dmu_object_free(spa->spa_meta_objset, spa_err_obj, tx));
}
void
spa_upgrade_errlog(spa_t *spa, dmu_tx_t *tx)
{
uint64_t newobj = 0;
mutex_enter(&spa->spa_errlog_lock);
if (spa->spa_errlog_last != 0) {
sync_upgrade_errlog(spa, spa->spa_errlog_last, &newobj, tx);
spa->spa_errlog_last = newobj;
}
if (spa->spa_errlog_scrub != 0) {
sync_upgrade_errlog(spa, spa->spa_errlog_scrub, &newobj, tx);
spa->spa_errlog_scrub = newobj;
}
mutex_exit(&spa->spa_errlog_lock);
2008-11-20 23:01:55 +03:00
}
#ifdef _KERNEL
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
* If an error block is shared by two datasets it will be counted twice.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*/
2008-11-20 23:01:55 +03:00
static int
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
process_error_log(spa_t *spa, uint64_t obj, void *uaddr, uint64_t *count)
2008-11-20 23:01:55 +03:00
{
zap_cursor_t zc;
zap_attribute_t za;
if (obj == 0)
return (0);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (!spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
for (zap_cursor_init(&zc, spa->spa_meta_objset, obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
if (*count == 0) {
zap_cursor_fini(&zc);
return (SET_ERROR(ENOMEM));
}
zbookmark_phys_t zb;
name_to_bookmark(za.za_name, &zb);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
int error = copyout_entry(&zb, uaddr, count);
if (error != 0) {
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
zap_cursor_fini(&zc);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
return (error);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
2008-11-20 23:01:55 +03:00
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
zap_cursor_fini(&zc);
return (0);
}
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
for (zap_cursor_init(&zc, spa->spa_meta_objset, obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
zap_cursor_t head_ds_cursor;
zap_attribute_t head_ds_attr;
uint64_t head_ds_err_obj = za.za_first_integer;
uint64_t head_ds;
name_to_object(za.za_name, &head_ds);
for (zap_cursor_init(&head_ds_cursor, spa->spa_meta_objset,
head_ds_err_obj); zap_cursor_retrieve(&head_ds_cursor,
&head_ds_attr) == 0; zap_cursor_advance(&head_ds_cursor)) {
zbookmark_err_phys_t head_ds_block;
name_to_errphys(head_ds_attr.za_name, &head_ds_block);
int error = process_error_block(spa, head_ds,
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
&head_ds_block, uaddr, count);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (error != 0) {
zap_cursor_fini(&head_ds_cursor);
zap_cursor_fini(&zc);
return (error);
}
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
zap_cursor_fini(&head_ds_cursor);
2008-11-20 23:01:55 +03:00
}
zap_cursor_fini(&zc);
return (0);
}
static int
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
process_error_list(spa_t *spa, avl_tree_t *list, void *uaddr, uint64_t *count)
2008-11-20 23:01:55 +03:00
{
spa_error_entry_t *se;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (!spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
for (se = avl_first(list); se != NULL;
se = AVL_NEXT(list, se)) {
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
int error =
copyout_entry(&se->se_bookmark, uaddr, count);
if (error != 0) {
return (error);
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
return (0);
2008-11-20 23:01:55 +03:00
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
for (se = avl_first(list); se != NULL; se = AVL_NEXT(list, se)) {
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
uint64_t head_ds = 0;
int error = get_head_ds(spa, se->se_bookmark.zb_objset,
&head_ds);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
/*
* If get_head_ds() errors out, set the head filesystem
* to the filesystem stored in the bookmark of the
* error block.
*/
if (error != 0)
head_ds = se->se_bookmark.zb_objset;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
error = process_error_block(spa, head_ds,
&se->se_zep, uaddr, count);
if (error != 0)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
return (error);
}
2008-11-20 23:01:55 +03:00
return (0);
}
#endif
/*
* Copy all known errors to userland as an array of bookmarks. This is
* actually a union of the on-disk last log and current log, as well as any
* pending error requests.
*
* Because the act of reading the on-disk log could cause errors to be
* generated, we have two separate locks: one for the error log and one for the
* in-core error lists. We only need the error list lock to log and error, so
* we grab the error log lock while we read the on-disk logs, and only pick up
* the error list lock when we are finished.
*/
int
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
spa_get_errlog(spa_t *spa, void *uaddr, uint64_t *count)
2008-11-20 23:01:55 +03:00
{
int ret = 0;
#ifdef _KERNEL
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
/*
* The pool config lock is needed to hold a dataset_t via (among other
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* places) process_error_list() -> process_error_block()->
* find_top_affected_fs(), and lock ordering requires that we get it
* before the spa_errlog_lock.
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
*/
dsl_pool_config_enter(spa->spa_dsl_pool, FTAG);
2008-11-20 23:01:55 +03:00
mutex_enter(&spa->spa_errlog_lock);
ret = process_error_log(spa, spa->spa_errlog_scrub, uaddr, count);
if (!ret && !spa->spa_scrub_finished)
ret = process_error_log(spa, spa->spa_errlog_last, uaddr,
count);
mutex_enter(&spa->spa_errlist_lock);
if (!ret)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
ret = process_error_list(spa, &spa->spa_errlist_scrub, uaddr,
2008-11-20 23:01:55 +03:00
count);
if (!ret)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
ret = process_error_list(spa, &spa->spa_errlist_last, uaddr,
2008-11-20 23:01:55 +03:00
count);
mutex_exit(&spa->spa_errlist_lock);
mutex_exit(&spa->spa_errlog_lock);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
dsl_pool_config_exit(spa->spa_dsl_pool, FTAG);
#else
(void) spa, (void) uaddr, (void) count;
2008-11-20 23:01:55 +03:00
#endif
return (ret);
}
/*
* Called when a scrub completes. This simply set a bit which tells which AVL
* tree to add new errors. spa_errlog_sync() is responsible for actually
* syncing the changes to the underlying objects.
*/
void
spa_errlog_rotate(spa_t *spa)
{
mutex_enter(&spa->spa_errlist_lock);
spa->spa_scrub_finished = B_TRUE;
mutex_exit(&spa->spa_errlist_lock);
}
/*
* Discard any pending errors from the spa_t. Called when unloading a faulted
* pool, as the errors encountered during the open cannot be synced to disk.
*/
void
spa_errlog_drain(spa_t *spa)
{
spa_error_entry_t *se;
void *cookie;
mutex_enter(&spa->spa_errlist_lock);
cookie = NULL;
while ((se = avl_destroy_nodes(&spa->spa_errlist_last,
&cookie)) != NULL)
kmem_free(se, sizeof (spa_error_entry_t));
cookie = NULL;
while ((se = avl_destroy_nodes(&spa->spa_errlist_scrub,
&cookie)) != NULL)
kmem_free(se, sizeof (spa_error_entry_t));
mutex_exit(&spa->spa_errlist_lock);
}
/*
* Process a list of errors into the current on-disk log.
*/
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
void
2008-11-20 23:01:55 +03:00
sync_error_list(spa_t *spa, avl_tree_t *t, uint64_t *obj, dmu_tx_t *tx)
{
spa_error_entry_t *se;
char buf[NAME_MAX_LEN];
2008-11-20 23:01:55 +03:00
void *cookie;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (avl_numnodes(t) == 0)
return;
/* create log if necessary */
if (*obj == 0)
*obj = zap_create(spa->spa_meta_objset, DMU_OT_ERROR_LOG,
DMU_OT_NONE, 0, tx);
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/* add errors to the current log */
if (!spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
2008-11-20 23:01:55 +03:00
for (se = avl_first(t); se != NULL; se = AVL_NEXT(t, se)) {
bookmark_to_name(&se->se_bookmark, buf, sizeof (buf));
const char *name = se->se_name ? se->se_name : "";
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
(void) zap_update(spa->spa_meta_objset, *obj, buf, 1,
strlen(name) + 1, name, tx);
}
} else {
for (se = avl_first(t); se != NULL; se = AVL_NEXT(t, se)) {
zbookmark_err_phys_t zep;
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
zep.zb_object = se->se_zep.zb_object;
zep.zb_level = se->se_zep.zb_level;
zep.zb_blkid = se->se_zep.zb_blkid;
zep.zb_birth = se->se_zep.zb_birth;
uint64_t head_ds = 0;
int error = get_head_ds(spa, se->se_bookmark.zb_objset,
&head_ds);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/*
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* If get_head_ds() errors out, set the head filesystem
* to the filesystem stored in the bookmark of the
* error block.
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
*/
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
if (error != 0)
head_ds = se->se_bookmark.zb_objset;
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
uint64_t err_obj;
error = zap_lookup_int_key(spa->spa_meta_objset,
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
*obj, head_ds, &err_obj);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
if (error == ENOENT) {
err_obj = zap_create(spa->spa_meta_objset,
DMU_OT_ERROR_LOG, DMU_OT_NONE, 0, tx);
(void) zap_update_int_key(spa->spa_meta_objset,
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
*obj, head_ds, err_obj, tx);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
errphys_to_name(&zep, buf, sizeof (buf));
const char *name = se->se_name ? se->se_name : "";
2008-11-20 23:01:55 +03:00
(void) zap_update(spa->spa_meta_objset,
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
err_obj, buf, 1, strlen(name) + 1, name, tx);
2008-11-20 23:01:55 +03:00
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
}
/* purge the error list */
cookie = NULL;
while ((se = avl_destroy_nodes(t, &cookie)) != NULL)
kmem_free(se, sizeof (spa_error_entry_t));
}
2008-11-20 23:01:55 +03:00
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
static void
delete_errlog(spa_t *spa, uint64_t spa_err_obj, dmu_tx_t *tx)
{
if (spa_feature_is_enabled(spa, SPA_FEATURE_HEAD_ERRLOG)) {
zap_cursor_t zc;
zap_attribute_t za;
for (zap_cursor_init(&zc, spa->spa_meta_objset, spa_err_obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
VERIFY0(dmu_object_free(spa->spa_meta_objset,
za.za_first_integer, tx));
}
zap_cursor_fini(&zc);
2008-11-20 23:01:55 +03:00
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
VERIFY0(dmu_object_free(spa->spa_meta_objset, spa_err_obj, tx));
2008-11-20 23:01:55 +03:00
}
/*
* Sync the error log out to disk. This is a little tricky because the act of
* writing the error log requires the spa_errlist_lock. So, we need to lock the
* error lists, take a copy of the lists, and then reinitialize them. Then, we
* drop the error list lock and take the error log lock, at which point we
* do the errlog processing. Then, if we encounter an I/O error during this
* process, we can successfully add the error to the list. Note that this will
* result in the perpetual recycling of errors, but it is an unlikely situation
* and not a performance critical operation.
*/
void
spa_errlog_sync(spa_t *spa, uint64_t txg)
{
dmu_tx_t *tx;
avl_tree_t scrub, last;
int scrub_finished;
mutex_enter(&spa->spa_errlist_lock);
/*
* Bail out early under normal circumstances.
*/
if (avl_numnodes(&spa->spa_errlist_scrub) == 0 &&
avl_numnodes(&spa->spa_errlist_last) == 0 &&
avl_numnodes(&spa->spa_errlist_healed) == 0 &&
2008-11-20 23:01:55 +03:00
!spa->spa_scrub_finished) {
mutex_exit(&spa->spa_errlist_lock);
return;
}
spa_get_errlists(spa, &last, &scrub);
scrub_finished = spa->spa_scrub_finished;
spa->spa_scrub_finished = B_FALSE;
mutex_exit(&spa->spa_errlist_lock);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
/*
* The pool config lock is needed to hold a dataset_t via
Fixes in persistent error log Address the following bugs in persistent error log: 1) Check nested clones, eg "fs->snap->clone->snap2->clone2". 2) When deleting files containing error blocks in those clones (from "clone" the example above), do not break the check chain. 3) When deleting files in the originating fs before syncing the errlog to disk, do not break the check chain. This happens because at the time of introducing the error block in the error list, we do not have its birth txg and the head filesystem. If the original file is deleted before the error list is synced to the error log (which is when we actually lookup the birth txg and the head filesystem), then we do not have access to this info anymore and break the check chain. The most prominent change is related to achieving (3). We expand the spa_error_entry_t structure to accommodate the newly introduced zbookmark_err_phys_t structure (containing the birth txg of the error block).Due to compatibility reasons we cannot remove the zbookmark_phys_t structure and we also need to place the new structure after se_avl, so it is not accounted for in avl_find(). Then we modify spa_log_error() to also provide the birth txg of the error block. With these changes in place we simplify the previously introduced function get_head_and_birth_txg() (now named get_head_ds()). We chose not to follow the same approach for the head filesystem (thus completely removing get_head_ds()) to avoid introducing new lock contentions. The stack sizes of nested functions (as measured by checkstack.pl in the linux kernel) are: check_filesystem [zfs]: 272 (was 912) check_clones [zfs]: 64 We also introduced two new tests covering the above changes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #14633
2023-03-29 02:51:58 +03:00
* sync_error_list() -> get_head_ds(), and lock ordering
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
* requires that we get it before the spa_errlog_lock.
*/
dsl_pool_config_enter(spa->spa_dsl_pool, FTAG);
2008-11-20 23:01:55 +03:00
mutex_enter(&spa->spa_errlog_lock);
tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg);
/*
* Remove healed errors from errors.
*/
spa_remove_healed_errors(spa, &last, &scrub, tx);
2008-11-20 23:01:55 +03:00
/*
* Sync out the current list of errors.
*/
sync_error_list(spa, &last, &spa->spa_errlog_last, tx);
/*
* Rotate the log if necessary.
*/
if (scrub_finished) {
if (spa->spa_errlog_last != 0)
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
delete_errlog(spa, spa->spa_errlog_last, tx);
2008-11-20 23:01:55 +03:00
spa->spa_errlog_last = spa->spa_errlog_scrub;
spa->spa_errlog_scrub = 0;
sync_error_list(spa, &scrub, &spa->spa_errlog_last, tx);
}
/*
* Sync out any pending scrub errors.
*/
sync_error_list(spa, &scrub, &spa->spa_errlog_scrub, tx);
/*
* Update the MOS to reflect the new values.
*/
(void) zap_update(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_ERRLOG_LAST, sizeof (uint64_t), 1,
&spa->spa_errlog_last, tx);
(void) zap_update(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_ERRLOG_SCRUB, sizeof (uint64_t), 1,
&spa->spa_errlog_scrub, tx);
dmu_tx_commit(tx);
mutex_exit(&spa->spa_errlog_lock);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
dsl_pool_config_exit(spa->spa_dsl_pool, FTAG);
2008-11-20 23:01:55 +03:00
}
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
static void
delete_dataset_errlog(spa_t *spa, uint64_t spa_err_obj, uint64_t ds,
dmu_tx_t *tx)
{
if (spa_err_obj == 0)
return;
zap_cursor_t zc;
zap_attribute_t za;
for (zap_cursor_init(&zc, spa->spa_meta_objset, spa_err_obj);
zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) {
uint64_t head_ds;
name_to_object(za.za_name, &head_ds);
if (head_ds == ds) {
(void) zap_remove(spa->spa_meta_objset, spa_err_obj,
za.za_name, tx);
VERIFY0(dmu_object_free(spa->spa_meta_objset,
za.za_first_integer, tx));
break;
}
}
zap_cursor_fini(&zc);
}
void
spa_delete_dataset_errlog(spa_t *spa, uint64_t ds, dmu_tx_t *tx)
{
mutex_enter(&spa->spa_errlog_lock);
delete_dataset_errlog(spa, spa->spa_errlog_scrub, ds, tx);
delete_dataset_errlog(spa, spa->spa_errlog_last, ds, tx);
mutex_exit(&spa->spa_errlog_lock);
}
static int
find_txg_ancestor_snapshot(spa_t *spa, uint64_t new_head, uint64_t old_head,
uint64_t *txg)
{
dsl_dataset_t *ds;
dsl_pool_t *dp = spa->spa_dsl_pool;
int error = dsl_dataset_hold_obj(dp, old_head, FTAG, &ds);
if (error != 0)
return (error);
uint64_t prev_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
uint64_t prev_obj_txg = dsl_dataset_phys(ds)->ds_prev_snap_txg;
while (prev_obj != 0) {
dsl_dataset_rele(ds, FTAG);
if ((error = dsl_dataset_hold_obj(dp, prev_obj,
FTAG, &ds)) == 0 &&
dsl_dir_phys(ds->ds_dir)->dd_head_dataset_obj == new_head)
break;
if (error != 0)
return (error);
prev_obj_txg = dsl_dataset_phys(ds)->ds_prev_snap_txg;
prev_obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
}
dsl_dataset_rele(ds, FTAG);
ASSERT(prev_obj != 0);
*txg = prev_obj_txg;
return (0);
}
static void
swap_errlog(spa_t *spa, uint64_t spa_err_obj, uint64_t new_head, uint64_t
old_head, dmu_tx_t *tx)
{
if (spa_err_obj == 0)
return;
uint64_t old_head_errlog;
int error = zap_lookup_int_key(spa->spa_meta_objset, spa_err_obj,
old_head, &old_head_errlog);
/* If no error log, then there is nothing to do. */
if (error != 0)
return;
uint64_t txg;
error = find_txg_ancestor_snapshot(spa, new_head, old_head, &txg);
if (error != 0)
return;
/*
* Create an error log if the file system being promoted does not
* already have one.
*/
uint64_t new_head_errlog;
error = zap_lookup_int_key(spa->spa_meta_objset, spa_err_obj, new_head,
&new_head_errlog);
if (error != 0) {
new_head_errlog = zap_create(spa->spa_meta_objset,
DMU_OT_ERROR_LOG, DMU_OT_NONE, 0, tx);
(void) zap_update_int_key(spa->spa_meta_objset, spa_err_obj,
new_head, new_head_errlog, tx);
}
zap_cursor_t zc;
zap_attribute_t za;
zbookmark_err_phys_t err_block;
for (zap_cursor_init(&zc, spa->spa_meta_objset, old_head_errlog);
zap_cursor_retrieve(&zc, &za) == 0; zap_cursor_advance(&zc)) {
const char *name = "";
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
name_to_errphys(za.za_name, &err_block);
if (err_block.zb_birth < txg) {
(void) zap_update(spa->spa_meta_objset, new_head_errlog,
za.za_name, 1, strlen(name) + 1, name, tx);
(void) zap_remove(spa->spa_meta_objset, old_head_errlog,
za.za_name, tx);
}
}
zap_cursor_fini(&zc);
}
void
spa_swap_errlog(spa_t *spa, uint64_t new_head_ds, uint64_t old_head_ds,
dmu_tx_t *tx)
{
mutex_enter(&spa->spa_errlog_lock);
swap_errlog(spa, spa->spa_errlog_scrub, new_head_ds, old_head_ds, tx);
swap_errlog(spa, spa->spa_errlog_last, new_head_ds, old_head_ds, tx);
mutex_exit(&spa->spa_errlog_lock);
}
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 04:53:18 +03:00
#if defined(_KERNEL)
/* error handling */
EXPORT_SYMBOL(spa_log_error);
deadlock between spa_errlog_lock and dp_config_rwlock There is a lock order inversion deadlock between `spa_errlog_lock` and `dp_config_rwlock`: A thread in `spa_delete_dataset_errlog()` is running from a sync task. It is holding the `dp_config_rwlock` for writer (see `dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`. A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock` (see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as reader). Note that this was introduced by #12812. This commit address this by defining the lock ordering to be dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock. spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this order, and then process_error_block() and get_head_and_birth_txg() can verify that the dp_config_rwlock is already held. Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many code paths didn't check if `*count` got to zero, instead continuing to overwrite past the beginning of the userspace buffer at `uaddr`. Tested by having some errors in the pool (via `zinject -t data /path/to/file`), one thread running `zpool iostat 0.001`, and another thread runs `zfs destroy` (in a loop, although it hits the first time). This reproduces the problem easily without the fix, and works with the fix. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Amanakis <gamanakis@gmail.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #14239 Closes #14289
2022-12-22 22:48:49 +03:00
EXPORT_SYMBOL(spa_approx_errlog_size);
EXPORT_SYMBOL(spa_get_errlog);
EXPORT_SYMBOL(spa_errlog_rotate);
EXPORT_SYMBOL(spa_errlog_drain);
EXPORT_SYMBOL(spa_errlog_sync);
EXPORT_SYMBOL(spa_get_errlists);
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
EXPORT_SYMBOL(spa_delete_dataset_errlog);
EXPORT_SYMBOL(spa_swap_errlog);
EXPORT_SYMBOL(sync_error_list);
EXPORT_SYMBOL(spa_upgrade_errlog);
#endif
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
/* BEGIN CSTYLED */
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
ZFS_MODULE_PARAM(zfs_spa, spa_, upgrade_errlog_limit, UINT, ZMOD_RW,
Improve zpool status output, list all affected datasets Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Co-authored-by: TulsiJain <tulsi.jain@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9175 Closes #12812
2022-04-26 03:25:42 +03:00
"Limit the number of errors which will be upgraded to the new "
"on-disk error log when enabling head_errlog");
/* END CSTYLED */