mirror_zfs/lib/libzfs/libzfs_dataset.c

5554 lines
138 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright 2019 Joyent, Inc.
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 19:19:18 +03:00
* Copyright (c) 2011, 2020 by Delphix. All rights reserved.
* Copyright (c) 2012 DEY Storage Systems, Inc. All rights reserved.
* Copyright (c) 2012 Pawel Jakub Dawidek <pawel@dawidek.net>.
* Copyright (c) 2013 Martin Matuska. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
* Copyright 2017 Nexenta Systems, Inc.
* Copyright 2016 Igor Kozhukhov <ikozhukhov@gmail.com>
* Copyright 2017-2018 RackTop Systems.
* Copyright (c) 2019 Datto Inc.
* Copyright (c) 2019, loli10K <ezomori.nozomu@gmail.com>
* Copyright (c) 2021 Matt Fiddaman
2008-11-20 23:01:55 +03:00
*/
#include <ctype.h>
#include <errno.h>
#include <libintl.h>
#include <stdio.h>
#include <stdlib.h>
#include <strings.h>
#include <unistd.h>
#include <stddef.h>
#include <zone.h>
#include <fcntl.h>
#include <sys/mntent.h>
#include <sys/mount.h>
#include <pwd.h>
#include <grp.h>
#ifdef HAVE_IDMAP
2009-07-03 02:44:48 +04:00
#include <idmap.h>
#include <aclutils.h>
2009-08-18 22:43:27 +04:00
#include <directory.h>
#endif /* HAVE_IDMAP */
2008-11-20 23:01:55 +03:00
#include <sys/dnode.h>
2008-11-20 23:01:55 +03:00
#include <sys/spa.h>
#include <sys/zap.h>
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
#include <sys/dsl_crypt.h>
2008-11-20 23:01:55 +03:00
#include <libzfs.h>
#include <libzutil.h>
2008-11-20 23:01:55 +03:00
#include "zfs_namecheck.h"
#include "zfs_prop.h"
#include "libzfs_impl.h"
#include "zfs_deleg.h"
2009-07-03 02:44:48 +04:00
static int userquota_propname_decode(const char *propname, boolean_t zoned,
zfs_userquota_prop_t *typep, char *domain, int domainlen, uint64_t *ridp);
2008-11-20 23:01:55 +03:00
/*
* Given a single type (not a mask of types), return the type in a human
* readable form.
*/
const char *
zfs_type_to_name(zfs_type_t type)
{
switch (type) {
case ZFS_TYPE_FILESYSTEM:
return (dgettext(TEXT_DOMAIN, "filesystem"));
case ZFS_TYPE_SNAPSHOT:
return (dgettext(TEXT_DOMAIN, "snapshot"));
case ZFS_TYPE_VOLUME:
return (dgettext(TEXT_DOMAIN, "volume"));
case ZFS_TYPE_POOL:
return (dgettext(TEXT_DOMAIN, "pool"));
case ZFS_TYPE_BOOKMARK:
return (dgettext(TEXT_DOMAIN, "bookmark"));
default:
assert(!"unhandled zfs_type_t");
2008-11-20 23:01:55 +03:00
}
return (NULL);
}
/*
* Validate a ZFS path. This is used even before trying to open the dataset, to
2009-07-03 02:44:48 +04:00
* provide a more meaningful error message. We call zfs_error_aux() to
* explain exactly why the name was not valid.
2008-11-20 23:01:55 +03:00
*/
int
2008-11-20 23:01:55 +03:00
zfs_validate_name(libzfs_handle_t *hdl, const char *path, int type,
boolean_t modifying)
{
namecheck_err_t why;
char what;
if (!(type & ZFS_TYPE_SNAPSHOT) && strchr(path, '@') != NULL) {
if (hdl != NULL)
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"snapshot delimiter '@' is not expected here"));
return (0);
}
if (type == ZFS_TYPE_SNAPSHOT && strchr(path, '@') == NULL) {
if (hdl != NULL)
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"missing '@' delimiter in snapshot name"));
return (0);
}
if (!(type & ZFS_TYPE_BOOKMARK) && strchr(path, '#') != NULL) {
if (hdl != NULL)
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"bookmark delimiter '#' is not expected here"));
return (0);
}
if (type == ZFS_TYPE_BOOKMARK && strchr(path, '#') == NULL) {
if (hdl != NULL)
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"missing '#' delimiter in bookmark name"));
return (0);
}
if (modifying && strchr(path, '%') != NULL) {
if (hdl != NULL)
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid character %c in name"), '%');
return (0);
}
if (entity_namecheck(path, &why, &what) != 0) {
2008-11-20 23:01:55 +03:00
if (hdl != NULL) {
switch (why) {
case NAME_ERR_TOOLONG:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"name is too long"));
break;
case NAME_ERR_LEADING_SLASH:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"leading slash in name"));
break;
case NAME_ERR_EMPTY_COMPONENT:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"empty component or misplaced '@'"
" or '#' delimiter in name"));
2008-11-20 23:01:55 +03:00
break;
case NAME_ERR_TRAILING_SLASH:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"trailing slash in name"));
break;
case NAME_ERR_INVALCHAR:
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN, "invalid character "
"'%c' in name"), what);
break;
case NAME_ERR_MULTIPLE_DELIMITERS:
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"multiple '@' and/or '#' delimiters in "
"name"));
2008-11-20 23:01:55 +03:00
break;
case NAME_ERR_NOLETTER:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool doesn't begin with a letter"));
break;
case NAME_ERR_RESERVED:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"name is reserved"));
break;
case NAME_ERR_DISKLIKE:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"reserved disk name"));
break;
case NAME_ERR_SELF_REF:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"self reference, '.' is found in name"));
break;
case NAME_ERR_PARENT_REF:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"parent reference, '..' is found in name"));
break;
default:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"(%d) not defined"), why);
break;
2008-11-20 23:01:55 +03:00
}
}
return (0);
}
return (-1);
}
int
zfs_name_valid(const char *name, zfs_type_t type)
{
if (type == ZFS_TYPE_POOL)
return (zpool_name_valid(NULL, B_FALSE, name));
return (zfs_validate_name(NULL, name, type, B_FALSE));
}
/*
* This function takes the raw DSL properties, and filters out the user-defined
* properties into a separate nvlist.
*/
static nvlist_t *
process_user_props(zfs_handle_t *zhp, nvlist_t *props)
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
nvpair_t *elem;
nvlist_t *nvl;
if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) {
(void) no_memory(hdl);
return (NULL);
}
elem = NULL;
while ((elem = nvlist_next_nvpair(props, elem)) != NULL) {
if (!zfs_prop_user(nvpair_name(elem)))
continue;
nvlist_t *propval = fnvpair_value_nvlist(elem);
2008-11-20 23:01:55 +03:00
if (nvlist_add_nvlist(nvl, nvpair_name(elem), propval) != 0) {
nvlist_free(nvl);
(void) no_memory(hdl);
return (NULL);
}
}
return (nvl);
}
static zpool_handle_t *
zpool_add_handle(zfs_handle_t *zhp, const char *pool_name)
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
zpool_handle_t *zph;
if ((zph = zpool_open_canfail(hdl, pool_name)) != NULL) {
if (hdl->libzfs_pool_handles != NULL)
zph->zpool_next = hdl->libzfs_pool_handles;
hdl->libzfs_pool_handles = zph;
}
return (zph);
}
static zpool_handle_t *
zpool_find_handle(zfs_handle_t *zhp, const char *pool_name, int len)
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
zpool_handle_t *zph = hdl->libzfs_pool_handles;
while ((zph != NULL) &&
(strncmp(pool_name, zpool_get_name(zph), len) != 0))
zph = zph->zpool_next;
return (zph);
}
/*
* Returns a handle to the pool that contains the provided dataset.
* If a handle to that pool already exists then that handle is returned.
* Otherwise, a new handle is created and added to the list of handles.
*/
static zpool_handle_t *
zpool_handle(zfs_handle_t *zhp)
{
char *pool_name;
int len;
zpool_handle_t *zph;
len = strcspn(zhp->zfs_name, "/@#") + 1;
pool_name = zfs_alloc(zhp->zfs_hdl, len);
(void) strlcpy(pool_name, zhp->zfs_name, len);
zph = zpool_find_handle(zhp, pool_name, len);
if (zph == NULL)
zph = zpool_add_handle(zhp, pool_name);
free(pool_name);
return (zph);
}
void
zpool_free_handles(libzfs_handle_t *hdl)
{
zpool_handle_t *next, *zph = hdl->libzfs_pool_handles;
while (zph != NULL) {
next = zph->zpool_next;
zpool_close(zph);
zph = next;
}
hdl->libzfs_pool_handles = NULL;
}
2008-11-20 23:01:55 +03:00
/*
* Utility function to gather stats (objset and zpl) for the given object.
*/
static int
2009-01-16 00:59:39 +03:00
get_stats_ioctl(zfs_handle_t *zhp, zfs_cmd_t *zc)
2008-11-20 23:01:55 +03:00
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
2009-01-16 00:59:39 +03:00
(void) strlcpy(zc->zc_name, zhp->zfs_name, sizeof (zc->zc_name));
2008-11-20 23:01:55 +03:00
while (zfs_ioctl(hdl, ZFS_IOC_OBJSET_STATS, zc) != 0) {
if (errno == ENOMEM)
zcmd_expand_dst_nvlist(hdl, zc);
else
2008-11-20 23:01:55 +03:00
return (-1);
}
2009-01-16 00:59:39 +03:00
return (0);
}
2008-11-20 23:01:55 +03:00
/*
* Utility function to get the received properties of the given object.
*/
static int
get_recvd_props_ioctl(zfs_handle_t *zhp)
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
nvlist_t *recvdprops;
zfs_cmd_t zc = {"\0"};
int err;
zcmd_alloc_dst_nvlist(hdl, &zc, 0);
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
while (zfs_ioctl(hdl, ZFS_IOC_OBJSET_RECVD_PROPS, &zc) != 0) {
if (errno == ENOMEM)
zcmd_expand_dst_nvlist(hdl, &zc);
else {
zcmd_free_nvlists(&zc);
return (-1);
}
}
err = zcmd_read_dst_nvlist(zhp->zfs_hdl, &zc, &recvdprops);
zcmd_free_nvlists(&zc);
if (err != 0)
return (-1);
nvlist_free(zhp->zfs_recvd_props);
zhp->zfs_recvd_props = recvdprops;
return (0);
}
2009-01-16 00:59:39 +03:00
static int
put_stats_zhdl(zfs_handle_t *zhp, zfs_cmd_t *zc)
{
nvlist_t *allprops, *userprops;
2008-11-20 23:01:55 +03:00
2009-01-16 00:59:39 +03:00
zhp->zfs_dmustats = zc->zc_objset_stats; /* structure assignment */
if (zcmd_read_dst_nvlist(zhp->zfs_hdl, zc, &allprops) != 0) {
2008-11-20 23:01:55 +03:00
return (-1);
}
2009-07-03 02:44:48 +04:00
/*
* XXX Why do we store the user props separately, in addition to
* storing them in zfs_props?
*/
2008-11-20 23:01:55 +03:00
if ((userprops = process_user_props(zhp, allprops)) == NULL) {
nvlist_free(allprops);
return (-1);
}
nvlist_free(zhp->zfs_props);
nvlist_free(zhp->zfs_user_props);
zhp->zfs_props = allprops;
zhp->zfs_user_props = userprops;
return (0);
}
2009-01-16 00:59:39 +03:00
static int
get_stats(zfs_handle_t *zhp)
{
int rc = 0;
zfs_cmd_t zc = {"\0"};
2009-01-16 00:59:39 +03:00
zcmd_alloc_dst_nvlist(zhp->zfs_hdl, &zc, 0);
2009-01-16 00:59:39 +03:00
if (get_stats_ioctl(zhp, &zc) != 0)
rc = -1;
else if (put_stats_zhdl(zhp, &zc) != 0)
rc = -1;
zcmd_free_nvlists(&zc);
return (rc);
}
2008-11-20 23:01:55 +03:00
/*
* Refresh the properties currently stored in the handle.
*/
void
zfs_refresh_properties(zfs_handle_t *zhp)
{
(void) get_stats(zhp);
}
/*
* Makes a handle from the given dataset name. Used by zfs_open() and
* zfs_iter_* to create child handles on the fly.
*/
2009-01-16 00:59:39 +03:00
static int
make_dataset_handle_common(zfs_handle_t *zhp, zfs_cmd_t *zc)
2008-11-20 23:01:55 +03:00
{
if (put_stats_zhdl(zhp, zc) != 0)
2009-01-16 00:59:39 +03:00
return (-1);
2008-11-20 23:01:55 +03:00
/*
* We've managed to open the dataset and gather statistics. Determine
* the high-level type.
*/
if (zhp->zfs_dmustats.dds_type == DMU_OST_ZVOL) {
2008-11-20 23:01:55 +03:00
zhp->zfs_head_type = ZFS_TYPE_VOLUME;
} else if (zhp->zfs_dmustats.dds_type == DMU_OST_ZFS) {
2008-11-20 23:01:55 +03:00
zhp->zfs_head_type = ZFS_TYPE_FILESYSTEM;
} else if (zhp->zfs_dmustats.dds_type == DMU_OST_OTHER) {
errno = EINVAL;
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
return (-1);
} else if (zhp->zfs_dmustats.dds_inconsistent) {
errno = EBUSY;
return (-1);
} else {
2008-11-20 23:01:55 +03:00
abort();
}
2008-11-20 23:01:55 +03:00
if (zhp->zfs_dmustats.dds_is_snapshot)
zhp->zfs_type = ZFS_TYPE_SNAPSHOT;
else if (zhp->zfs_dmustats.dds_type == DMU_OST_ZVOL)
zhp->zfs_type = ZFS_TYPE_VOLUME;
else if (zhp->zfs_dmustats.dds_type == DMU_OST_ZFS)
zhp->zfs_type = ZFS_TYPE_FILESYSTEM;
else
abort(); /* we should never see any other types */
if ((zhp->zpool_hdl = zpool_handle(zhp)) == NULL)
return (-1);
2009-01-16 00:59:39 +03:00
return (0);
}
zfs_handle_t *
make_dataset_handle(libzfs_handle_t *hdl, const char *path)
{
zfs_cmd_t zc = {"\0"};
2009-01-16 00:59:39 +03:00
zfs_handle_t *zhp = calloc(1, sizeof (zfs_handle_t));
2009-01-16 00:59:39 +03:00
if (zhp == NULL)
return (NULL);
zhp->zfs_hdl = hdl;
(void) strlcpy(zhp->zfs_name, path, sizeof (zhp->zfs_name));
zcmd_alloc_dst_nvlist(hdl, &zc, 0);
2009-01-16 00:59:39 +03:00
if (get_stats_ioctl(zhp, &zc) == -1) {
zcmd_free_nvlists(&zc);
free(zhp);
return (NULL);
}
if (make_dataset_handle_common(zhp, &zc) == -1) {
free(zhp);
zhp = NULL;
}
zcmd_free_nvlists(&zc);
return (zhp);
}
zfs_handle_t *
2009-01-16 00:59:39 +03:00
make_dataset_handle_zc(libzfs_handle_t *hdl, zfs_cmd_t *zc)
{
zfs_handle_t *zhp = calloc(1, sizeof (zfs_handle_t));
2009-01-16 00:59:39 +03:00
if (zhp == NULL)
return (NULL);
zhp->zfs_hdl = hdl;
(void) strlcpy(zhp->zfs_name, zc->zc_name, sizeof (zhp->zfs_name));
if (make_dataset_handle_common(zhp, zc) == -1) {
free(zhp);
return (NULL);
}
2008-11-20 23:01:55 +03:00
return (zhp);
}
zfs_handle_t *
make_dataset_simple_handle_zc(zfs_handle_t *pzhp, zfs_cmd_t *zc)
{
zfs_handle_t *zhp = calloc(1, sizeof (zfs_handle_t));
if (zhp == NULL)
return (NULL);
zhp->zfs_hdl = pzhp->zfs_hdl;
(void) strlcpy(zhp->zfs_name, zc->zc_name, sizeof (zhp->zfs_name));
zhp->zfs_head_type = pzhp->zfs_type;
zhp->zfs_type = ZFS_TYPE_SNAPSHOT;
zhp->zpool_hdl = zpool_handle(zhp);
return (zhp);
}
zfs_handle_t *
zfs_handle_dup(zfs_handle_t *zhp_orig)
{
zfs_handle_t *zhp = calloc(1, sizeof (zfs_handle_t));
if (zhp == NULL)
return (NULL);
zhp->zfs_hdl = zhp_orig->zfs_hdl;
zhp->zpool_hdl = zhp_orig->zpool_hdl;
(void) strlcpy(zhp->zfs_name, zhp_orig->zfs_name,
sizeof (zhp->zfs_name));
zhp->zfs_type = zhp_orig->zfs_type;
zhp->zfs_head_type = zhp_orig->zfs_head_type;
zhp->zfs_dmustats = zhp_orig->zfs_dmustats;
if (zhp_orig->zfs_props != NULL) {
if (nvlist_dup(zhp_orig->zfs_props, &zhp->zfs_props, 0) != 0) {
(void) no_memory(zhp->zfs_hdl);
zfs_close(zhp);
return (NULL);
}
}
if (zhp_orig->zfs_user_props != NULL) {
if (nvlist_dup(zhp_orig->zfs_user_props,
&zhp->zfs_user_props, 0) != 0) {
(void) no_memory(zhp->zfs_hdl);
zfs_close(zhp);
return (NULL);
}
}
if (zhp_orig->zfs_recvd_props != NULL) {
if (nvlist_dup(zhp_orig->zfs_recvd_props,
&zhp->zfs_recvd_props, 0)) {
(void) no_memory(zhp->zfs_hdl);
zfs_close(zhp);
return (NULL);
}
}
zhp->zfs_mntcheck = zhp_orig->zfs_mntcheck;
if (zhp_orig->zfs_mntopts != NULL) {
zhp->zfs_mntopts = zfs_strdup(zhp_orig->zfs_hdl,
zhp_orig->zfs_mntopts);
}
zhp->zfs_props_table = zhp_orig->zfs_props_table;
return (zhp);
}
boolean_t
zfs_bookmark_exists(const char *path)
{
nvlist_t *bmarks;
nvlist_t *props;
char fsname[ZFS_MAX_DATASET_NAME_LEN];
char *bmark_name;
char *pound;
int err;
boolean_t rv;
(void) strlcpy(fsname, path, sizeof (fsname));
pound = strchr(fsname, '#');
if (pound == NULL)
return (B_FALSE);
*pound = '\0';
bmark_name = pound + 1;
props = fnvlist_alloc();
err = lzc_get_bookmarks(fsname, props, &bmarks);
nvlist_free(props);
if (err != 0) {
nvlist_free(bmarks);
return (B_FALSE);
}
rv = nvlist_exists(bmarks, bmark_name);
nvlist_free(bmarks);
return (rv);
}
zfs_handle_t *
make_bookmark_handle(zfs_handle_t *parent, const char *path,
nvlist_t *bmark_props)
{
zfs_handle_t *zhp = calloc(1, sizeof (zfs_handle_t));
if (zhp == NULL)
return (NULL);
/* Fill in the name. */
zhp->zfs_hdl = parent->zfs_hdl;
(void) strlcpy(zhp->zfs_name, path, sizeof (zhp->zfs_name));
/* Set the property lists. */
if (nvlist_dup(bmark_props, &zhp->zfs_props, 0) != 0) {
free(zhp);
return (NULL);
}
/* Set the types. */
zhp->zfs_head_type = parent->zfs_head_type;
zhp->zfs_type = ZFS_TYPE_BOOKMARK;
if ((zhp->zpool_hdl = zpool_handle(zhp)) == NULL) {
nvlist_free(zhp->zfs_props);
free(zhp);
return (NULL);
}
return (zhp);
}
struct zfs_open_bookmarks_cb_data {
const char *path;
zfs_handle_t *zhp;
};
static int
zfs_open_bookmarks_cb(zfs_handle_t *zhp, void *data)
{
struct zfs_open_bookmarks_cb_data *dp = data;
/*
* Is it the one we are looking for?
*/
if (strcmp(dp->path, zfs_get_name(zhp)) == 0) {
/*
* We found it. Save it and let the caller know we are done.
*/
dp->zhp = zhp;
return (EEXIST);
}
/*
* Not found. Close the handle and ask for another one.
*/
zfs_close(zhp);
return (0);
}
2008-11-20 23:01:55 +03:00
/*
* Opens the given snapshot, bookmark, filesystem, or volume. The 'types'
2008-11-20 23:01:55 +03:00
* argument is a mask of acceptable types. The function will print an
* appropriate error message and return NULL if it can't be opened.
*/
zfs_handle_t *
zfs_open(libzfs_handle_t *hdl, const char *path, int types)
{
zfs_handle_t *zhp;
char errbuf[1024];
char *bookp;
2008-11-20 23:01:55 +03:00
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot open '%s'"), path);
/*
* Validate the name before we even try to open it.
*/
if (!zfs_validate_name(hdl, path, types, B_FALSE)) {
2008-11-20 23:01:55 +03:00
(void) zfs_error(hdl, EZFS_INVALIDNAME, errbuf);
return (NULL);
}
/*
* Bookmarks needs to be handled separately.
2008-11-20 23:01:55 +03:00
*/
bookp = strchr(path, '#');
if (bookp == NULL) {
/*
* Try to get stats for the dataset, which will tell us if it
* exists.
*/
errno = 0;
if ((zhp = make_dataset_handle(hdl, path)) == NULL) {
(void) zfs_standard_error(hdl, errno, errbuf);
return (NULL);
}
} else {
char dsname[ZFS_MAX_DATASET_NAME_LEN];
zfs_handle_t *pzhp;
struct zfs_open_bookmarks_cb_data cb_data = {path, NULL};
/*
* We need to cut out '#' and everything after '#'
* to get the parent dataset name only.
*/
assert(bookp - path < sizeof (dsname));
(void) strncpy(dsname, path, bookp - path);
dsname[bookp - path] = '\0';
/*
* Create handle for the parent dataset.
*/
errno = 0;
if ((pzhp = make_dataset_handle(hdl, dsname)) == NULL) {
(void) zfs_standard_error(hdl, errno, errbuf);
return (NULL);
}
/*
* Iterate bookmarks to find the right one.
*/
errno = 0;
if ((zfs_iter_bookmarks(pzhp, zfs_open_bookmarks_cb,
&cb_data) == 0) && (cb_data.zhp == NULL)) {
(void) zfs_error(hdl, EZFS_NOENT, errbuf);
zfs_close(pzhp);
return (NULL);
}
if (cb_data.zhp == NULL) {
(void) zfs_standard_error(hdl, errno, errbuf);
zfs_close(pzhp);
return (NULL);
}
zhp = cb_data.zhp;
/*
* Cleanup.
*/
zfs_close(pzhp);
2008-11-20 23:01:55 +03:00
}
if (!(types & zhp->zfs_type)) {
(void) zfs_error(hdl, EZFS_BADTYPE, errbuf);
zfs_close(zhp);
return (NULL);
}
return (zhp);
}
/*
* Release a ZFS handle. Nothing to do but free the associated memory.
*/
void
zfs_close(zfs_handle_t *zhp)
{
if (zhp->zfs_mntopts)
free(zhp->zfs_mntopts);
nvlist_free(zhp->zfs_props);
nvlist_free(zhp->zfs_user_props);
nvlist_free(zhp->zfs_recvd_props);
2008-11-20 23:01:55 +03:00
free(zhp);
}
2009-01-16 00:59:39 +03:00
typedef struct mnttab_node {
struct mnttab mtn_mt;
avl_node_t mtn_node;
} mnttab_node_t;
static int
libzfs_mnttab_cache_compare(const void *arg1, const void *arg2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
const mnttab_node_t *mtn1 = (const mnttab_node_t *)arg1;
const mnttab_node_t *mtn2 = (const mnttab_node_t *)arg2;
2009-01-16 00:59:39 +03:00
int rv;
rv = strcmp(mtn1->mtn_mt.mnt_special, mtn2->mtn_mt.mnt_special);
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 20:36:03 +03:00
return (TREE_ISIGN(rv));
2009-01-16 00:59:39 +03:00
}
void
libzfs_mnttab_init(libzfs_handle_t *hdl)
{
pthread_mutex_init(&hdl->libzfs_mnttab_cache_lock, NULL);
2009-01-16 00:59:39 +03:00
assert(avl_numnodes(&hdl->libzfs_mnttab_cache) == 0);
avl_create(&hdl->libzfs_mnttab_cache, libzfs_mnttab_cache_compare,
sizeof (mnttab_node_t), offsetof(mnttab_node_t, mtn_node));
2009-07-03 02:44:48 +04:00
}
static int
2009-07-03 02:44:48 +04:00
libzfs_mnttab_update(libzfs_handle_t *hdl)
{
FILE *mnttab;
2009-07-03 02:44:48 +04:00
struct mnttab entry;
2009-01-16 00:59:39 +03:00
if ((mnttab = fopen(MNTTAB, "re")) == NULL)
return (ENOENT);
while (getmntent(mnttab, &entry) == 0) {
2009-01-16 00:59:39 +03:00
mnttab_node_t *mtn;
avl_index_t where;
2009-01-16 00:59:39 +03:00
if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0)
continue;
2009-01-16 00:59:39 +03:00
mtn = zfs_alloc(hdl, sizeof (mnttab_node_t));
mtn->mtn_mt.mnt_special = zfs_strdup(hdl, entry.mnt_special);
mtn->mtn_mt.mnt_mountp = zfs_strdup(hdl, entry.mnt_mountp);
mtn->mtn_mt.mnt_fstype = zfs_strdup(hdl, entry.mnt_fstype);
mtn->mtn_mt.mnt_mntopts = zfs_strdup(hdl, entry.mnt_mntopts);
/* Exclude duplicate mounts */
if (avl_find(&hdl->libzfs_mnttab_cache, mtn, &where) != NULL) {
free(mtn->mtn_mt.mnt_special);
free(mtn->mtn_mt.mnt_mountp);
free(mtn->mtn_mt.mnt_fstype);
free(mtn->mtn_mt.mnt_mntopts);
free(mtn);
continue;
}
2009-01-16 00:59:39 +03:00
avl_add(&hdl->libzfs_mnttab_cache, mtn);
}
(void) fclose(mnttab);
return (0);
2009-01-16 00:59:39 +03:00
}
void
libzfs_mnttab_fini(libzfs_handle_t *hdl)
{
void *cookie = NULL;
mnttab_node_t *mtn;
while ((mtn = avl_destroy_nodes(&hdl->libzfs_mnttab_cache, &cookie))
!= NULL) {
2009-01-16 00:59:39 +03:00
free(mtn->mtn_mt.mnt_special);
free(mtn->mtn_mt.mnt_mountp);
free(mtn->mtn_mt.mnt_fstype);
free(mtn->mtn_mt.mnt_mntopts);
free(mtn);
}
avl_destroy(&hdl->libzfs_mnttab_cache);
(void) pthread_mutex_destroy(&hdl->libzfs_mnttab_cache_lock);
2009-01-16 00:59:39 +03:00
}
2009-07-03 02:44:48 +04:00
void
libzfs_mnttab_cache(libzfs_handle_t *hdl, boolean_t enable)
{
hdl->libzfs_mnttab_enable = enable;
}
2009-01-16 00:59:39 +03:00
int
libzfs_mnttab_find(libzfs_handle_t *hdl, const char *fsname,
struct mnttab *entry)
{
FILE *mnttab;
2009-01-16 00:59:39 +03:00
mnttab_node_t find;
mnttab_node_t *mtn;
int ret = ENOENT;
2009-01-16 00:59:39 +03:00
2009-07-03 02:44:48 +04:00
if (!hdl->libzfs_mnttab_enable) {
struct mnttab srch = { 0 };
if (avl_numnodes(&hdl->libzfs_mnttab_cache))
libzfs_mnttab_fini(hdl);
if ((mnttab = fopen(MNTTAB, "re")) == NULL)
return (ENOENT);
2009-07-03 02:44:48 +04:00
srch.mnt_special = (char *)fsname;
srch.mnt_fstype = MNTTYPE_ZFS;
ret = getmntany(mnttab, entry, &srch) ? ENOENT : 0;
(void) fclose(mnttab);
return (ret);
2009-07-03 02:44:48 +04:00
}
pthread_mutex_lock(&hdl->libzfs_mnttab_cache_lock);
if (avl_numnodes(&hdl->libzfs_mnttab_cache) == 0) {
int error;
if ((error = libzfs_mnttab_update(hdl)) != 0) {
pthread_mutex_unlock(&hdl->libzfs_mnttab_cache_lock);
return (error);
}
}
2009-01-16 00:59:39 +03:00
find.mtn_mt.mnt_special = (char *)fsname;
mtn = avl_find(&hdl->libzfs_mnttab_cache, &find, NULL);
if (mtn) {
*entry = mtn->mtn_mt;
ret = 0;
2009-01-16 00:59:39 +03:00
}
pthread_mutex_unlock(&hdl->libzfs_mnttab_cache_lock);
return (ret);
2009-01-16 00:59:39 +03:00
}
void
libzfs_mnttab_add(libzfs_handle_t *hdl, const char *special,
const char *mountp, const char *mntopts)
{
mnttab_node_t *mtn;
pthread_mutex_lock(&hdl->libzfs_mnttab_cache_lock);
if (avl_numnodes(&hdl->libzfs_mnttab_cache) != 0) {
mtn = zfs_alloc(hdl, sizeof (mnttab_node_t));
mtn->mtn_mt.mnt_special = zfs_strdup(hdl, special);
mtn->mtn_mt.mnt_mountp = zfs_strdup(hdl, mountp);
mtn->mtn_mt.mnt_fstype = zfs_strdup(hdl, MNTTYPE_ZFS);
mtn->mtn_mt.mnt_mntopts = zfs_strdup(hdl, mntopts);
/*
* Another thread may have already added this entry
* via libzfs_mnttab_update. If so we should skip it.
*/
if (avl_find(&hdl->libzfs_mnttab_cache, mtn, NULL) != NULL) {
free(mtn->mtn_mt.mnt_special);
free(mtn->mtn_mt.mnt_mountp);
free(mtn->mtn_mt.mnt_fstype);
free(mtn->mtn_mt.mnt_mntopts);
free(mtn);
} else {
avl_add(&hdl->libzfs_mnttab_cache, mtn);
}
}
pthread_mutex_unlock(&hdl->libzfs_mnttab_cache_lock);
2009-01-16 00:59:39 +03:00
}
void
libzfs_mnttab_remove(libzfs_handle_t *hdl, const char *fsname)
{
mnttab_node_t find;
mnttab_node_t *ret;
pthread_mutex_lock(&hdl->libzfs_mnttab_cache_lock);
2009-01-16 00:59:39 +03:00
find.mtn_mt.mnt_special = (char *)fsname;
if ((ret = avl_find(&hdl->libzfs_mnttab_cache, (void *)&find, NULL))
!= NULL) {
2009-01-16 00:59:39 +03:00
avl_remove(&hdl->libzfs_mnttab_cache, ret);
free(ret->mtn_mt.mnt_special);
free(ret->mtn_mt.mnt_mountp);
free(ret->mtn_mt.mnt_fstype);
free(ret->mtn_mt.mnt_mntopts);
free(ret);
}
pthread_mutex_unlock(&hdl->libzfs_mnttab_cache_lock);
2009-01-16 00:59:39 +03:00
}
2008-11-20 23:01:55 +03:00
int
zfs_spa_version(zfs_handle_t *zhp, int *spa_version)
{
zpool_handle_t *zpool_handle = zhp->zpool_hdl;
2008-11-20 23:01:55 +03:00
if (zpool_handle == NULL)
return (-1);
*spa_version = zpool_get_prop_int(zpool_handle,
ZPOOL_PROP_VERSION, NULL);
return (0);
}
/*
* The choice of reservation property depends on the SPA version.
*/
static int
zfs_which_resv_prop(zfs_handle_t *zhp, zfs_prop_t *resv_prop)
{
int spa_version;
if (zfs_spa_version(zhp, &spa_version) < 0)
return (-1);
if (spa_version >= SPA_VERSION_REFRESERVATION)
*resv_prop = ZFS_PROP_REFRESERVATION;
else
*resv_prop = ZFS_PROP_RESERVATION;
return (0);
}
/*
* Given an nvlist of properties to set, validates that they are correct, and
* parses any numeric properties (index, boolean, etc) if they are specified as
* strings.
*/
nvlist_t *
zfs_valid_proplist(libzfs_handle_t *hdl, zfs_type_t type, nvlist_t *nvl,
uint64_t zoned, zfs_handle_t *zhp, zpool_handle_t *zpool_hdl,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
boolean_t key_params_ok, const char *errbuf)
2008-11-20 23:01:55 +03:00
{
nvpair_t *elem;
uint64_t intval;
char *strval;
zfs_prop_t prop;
nvlist_t *ret;
int chosen_normal = -1;
int chosen_utf = -1;
if (nvlist_alloc(&ret, NV_UNIQUE_NAME, 0) != 0) {
(void) no_memory(hdl);
return (NULL);
}
2009-07-03 02:44:48 +04:00
/*
* Make sure this property is valid and applies to this type.
*/
2008-11-20 23:01:55 +03:00
elem = NULL;
while ((elem = nvlist_next_nvpair(nvl, elem)) != NULL) {
const char *propname = nvpair_name(elem);
2009-07-03 02:44:48 +04:00
prop = zfs_name_to_prop(propname);
if (prop == ZPROP_INVAL && zfs_prop_user(propname)) {
2008-11-20 23:01:55 +03:00
/*
2009-07-03 02:44:48 +04:00
* This is a user property: make sure it's a
2008-11-20 23:01:55 +03:00
* string, and that it's less than ZAP_MAXNAMELEN.
*/
if (nvpair_type(elem) != DATA_TYPE_STRING) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' must be a string"), propname);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
if (strlen(nvpair_name(elem)) >= ZAP_MAXNAMELEN) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"property name '%s' is too long"),
propname);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
(void) nvpair_value_string(elem, &strval);
if (nvlist_add_string(ret, propname, strval) != 0) {
(void) no_memory(hdl);
goto error;
}
continue;
}
2009-07-03 02:44:48 +04:00
/*
* Currently, only user properties can be modified on
* snapshots.
*/
if (type == ZFS_TYPE_SNAPSHOT) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"this property can not be modified for snapshots"));
(void) zfs_error(hdl, EZFS_PROPTYPE, errbuf);
goto error;
}
2009-07-03 02:44:48 +04:00
if (prop == ZPROP_INVAL && zfs_prop_userquota(propname)) {
zfs_userquota_prop_t uqtype;
char *newpropname = NULL;
2009-07-03 02:44:48 +04:00
char domain[128];
uint64_t rid;
uint64_t valary[3];
int rc;
2009-07-03 02:44:48 +04:00
if (userquota_propname_decode(propname, zoned,
&uqtype, domain, sizeof (domain), &rid) != 0) {
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN,
"'%s' has an invalid user/group name"),
propname);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
if (uqtype != ZFS_PROP_USERQUOTA &&
uqtype != ZFS_PROP_GROUPQUOTA &&
uqtype != ZFS_PROP_USEROBJQUOTA &&
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
uqtype != ZFS_PROP_GROUPOBJQUOTA &&
uqtype != ZFS_PROP_PROJECTQUOTA &&
uqtype != ZFS_PROP_PROJECTOBJQUOTA) {
2009-07-03 02:44:48 +04:00
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN, "'%s' is readonly"),
propname);
(void) zfs_error(hdl, EZFS_PROPREADONLY,
errbuf);
goto error;
}
if (nvpair_type(elem) == DATA_TYPE_STRING) {
(void) nvpair_value_string(elem, &strval);
if (strcmp(strval, "none") == 0) {
intval = 0;
} else if (zfs_nicestrtonum(hdl,
strval, &intval) != 0) {
(void) zfs_error(hdl,
EZFS_BADPROP, errbuf);
goto error;
}
} else if (nvpair_type(elem) ==
DATA_TYPE_UINT64) {
(void) nvpair_value_uint64(elem, &intval);
if (intval == 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"use 'none' to disable "
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
"{user|group|project}quota"));
2009-07-03 02:44:48 +04:00
goto error;
}
} else {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' must be a number"), propname);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
/*
* Encode the prop name as
* userquota@<hex-rid>-domain, to make it easy
* for the kernel to decode.
*/
rc = asprintf(&newpropname, "%s%llx-%s",
zfs_userquota_prop_prefixes[uqtype],
(longlong_t)rid, domain);
if (rc == -1 || newpropname == NULL) {
(void) no_memory(hdl);
goto error;
}
2009-07-03 02:44:48 +04:00
valary[0] = uqtype;
valary[1] = rid;
valary[2] = intval;
if (nvlist_add_uint64_array(ret, newpropname,
valary, 3) != 0) {
free(newpropname);
2009-07-03 02:44:48 +04:00
(void) no_memory(hdl);
goto error;
}
free(newpropname);
2009-07-03 02:44:48 +04:00
continue;
} else if (prop == ZPROP_INVAL && zfs_prop_written(propname)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' is readonly"),
propname);
(void) zfs_error(hdl, EZFS_PROPREADONLY, errbuf);
goto error;
2009-07-03 02:44:48 +04:00
}
if (prop == ZPROP_INVAL) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid property '%s'"), propname);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
if (!zfs_prop_valid_for_type(prop, type, B_FALSE)) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN, "'%s' does not "
"apply to datasets of this type"), propname);
(void) zfs_error(hdl, EZFS_PROPTYPE, errbuf);
goto error;
}
if (zfs_prop_readonly(prop) &&
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
!(zfs_prop_setonce(prop) && zhp == NULL) &&
!(zfs_prop_encryption_key_param(prop) && key_params_ok)) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN, "'%s' is readonly"),
propname);
(void) zfs_error(hdl, EZFS_PROPREADONLY, errbuf);
goto error;
}
if (zprop_parse_value(hdl, elem, prop, type, ret,
&strval, &intval, errbuf) != 0)
goto error;
/*
* Perform some additional checks for specific properties.
*/
switch (prop) {
case ZFS_PROP_VERSION:
{
int version;
if (zhp == NULL)
break;
version = zfs_prop_get_int(zhp, ZFS_PROP_VERSION);
if (intval < version) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"Can not downgrade; already at version %u"),
version);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
break;
}
case ZFS_PROP_VOLBLOCKSIZE:
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
case ZFS_PROP_RECORDSIZE:
{
int maxbs = SPA_MAXBLOCKSIZE;
char buf[64];
if (zpool_hdl != NULL) {
maxbs = zpool_get_prop_int(zpool_hdl,
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
ZPOOL_PROP_MAXBLOCKSIZE, NULL);
}
/*
* The value must be a power of two between
* SPA_MINBLOCKSIZE and maxbs.
*/
2008-11-20 23:01:55 +03:00
if (intval < SPA_MINBLOCKSIZE ||
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
intval > maxbs || !ISP2(intval)) {
zfs_nicebytes(maxbs, buf, sizeof (buf));
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
"'%s' must be power of 2 from 512B "
"to %s"), propname, buf);
2008-11-20 23:01:55 +03:00
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
break;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
}
case ZFS_PROP_SPECIAL_SMALL_BLOCKS:
{
int maxbs = SPA_OLD_MAXBLOCKSIZE;
char buf[64];
if (zpool_hdl != NULL) {
char state[64] = "";
maxbs = zpool_get_prop_int(zpool_hdl,
ZPOOL_PROP_MAXBLOCKSIZE, NULL);
/*
* Issue a warning but do not fail so that
* tests for settable properties succeed.
*/
if (zpool_prop_get_feature(zpool_hdl,
"feature@allocation_classes", state,
sizeof (state)) != 0 ||
strcmp(state, ZFS_FEATURE_ACTIVE) != 0) {
(void) fprintf(stderr, gettext(
"%s: property requires a special "
"device in the pool\n"), propname);
}
}
if (intval != 0 &&
(intval < SPA_MINBLOCKSIZE ||
intval > maxbs || !ISP2(intval))) {
zfs_nicebytes(maxbs, buf, sizeof (buf));
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid '%s=%llu' property: must be zero "
"or a power of 2 from 512B to %s"),
propname, (unsigned long long)intval, buf);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
break;
}
case ZFS_PROP_MLSLABEL:
{
#ifdef HAVE_MLSLABEL
/*
* Verify the mlslabel string and convert to
* internal hex label string.
*/
m_label_t *new_sl;
char *hex = NULL; /* internal label string */
/* Default value is already OK. */
if (strcasecmp(strval, ZFS_MLSLABEL_DEFAULT) == 0)
break;
/* Verify the label can be converted to binary form */
if (((new_sl = m_label_alloc(MAC_LABEL)) == NULL) ||
(str_to_label(strval, &new_sl, MAC_LABEL,
L_NO_CORRECTION, NULL) == -1)) {
goto badlabel;
2008-11-20 23:01:55 +03:00
}
/* Now translate to hex internal label string */
if (label_to_str(new_sl, &hex, M_INTERNAL,
DEF_NAMES) != 0) {
if (hex)
free(hex);
goto badlabel;
}
m_label_free(new_sl);
/* If string is already in internal form, we're done. */
if (strcmp(strval, hex) == 0) {
free(hex);
break;
}
/* Replace the label string with the internal form. */
(void) nvlist_remove(ret, zfs_prop_to_name(prop),
DATA_TYPE_STRING);
fnvlist_add_string(ret, zfs_prop_to_name(prop), hex);
free(hex);
2008-11-20 23:01:55 +03:00
break;
badlabel:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid mlslabel '%s'"), strval);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
m_label_free(new_sl); /* OK if null */
goto error;
#else
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"mlslabels are unsupported"));
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
#endif /* HAVE_MLSLABEL */
}
2008-11-20 23:01:55 +03:00
case ZFS_PROP_MOUNTPOINT:
{
namecheck_err_t why;
if (strcmp(strval, ZFS_MOUNTPOINT_NONE) == 0 ||
strcmp(strval, ZFS_MOUNTPOINT_LEGACY) == 0)
break;
if (mountpoint_namecheck(strval, &why)) {
switch (why) {
case NAME_ERR_LEADING_SLASH:
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN,
"'%s' must be an absolute path, "
"'none', or 'legacy'"), propname);
break;
case NAME_ERR_TOOLONG:
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN,
"component of '%s' is too long"),
propname);
break;
default:
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN,
"(%d) not defined"),
why);
break;
2008-11-20 23:01:55 +03:00
}
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
zfs_fallthrough;
2008-11-20 23:01:55 +03:00
}
case ZFS_PROP_SHARESMB:
case ZFS_PROP_SHARENFS:
/*
* For the mountpoint and sharenfs or sharesmb
* properties, check if it can be set in a
* global/non-global zone based on
* the zoned property value:
*
* global zone non-global zone
* --------------------------------------------------
* zoned=on mountpoint (no) mountpoint (yes)
* sharenfs (no) sharenfs (no)
* sharesmb (no) sharesmb (no)
*
* zoned=off mountpoint (yes) N/A
* sharenfs (yes)
* sharesmb (yes)
*/
if (zoned) {
if (getzoneid() == GLOBAL_ZONEID) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' cannot be set on "
"dataset in a non-global zone"),
propname);
(void) zfs_error(hdl, EZFS_ZONED,
errbuf);
goto error;
} else if (prop == ZFS_PROP_SHARENFS ||
prop == ZFS_PROP_SHARESMB) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' cannot be set in "
"a non-global zone"), propname);
(void) zfs_error(hdl, EZFS_ZONED,
errbuf);
goto error;
}
} else if (getzoneid() != GLOBAL_ZONEID) {
/*
* If zoned property is 'off', this must be in
2009-07-03 02:44:48 +04:00
* a global zone. If not, something is wrong.
2008-11-20 23:01:55 +03:00
*/
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' cannot be set while dataset "
"'zoned' property is set"), propname);
(void) zfs_error(hdl, EZFS_ZONED, errbuf);
goto error;
}
/*
* At this point, it is legitimate to set the
* property. Now we want to make sure that the
* property value is valid if it is sharenfs.
*/
if ((prop == ZFS_PROP_SHARENFS ||
prop == ZFS_PROP_SHARESMB) &&
strcmp(strval, "on") != 0 &&
strcmp(strval, "off") != 0) {
enum sa_protocol proto;
2008-11-20 23:01:55 +03:00
if (prop == ZFS_PROP_SHARESMB)
proto = SA_PROTOCOL_SMB;
2008-11-20 23:01:55 +03:00
else
proto = SA_PROTOCOL_NFS;
2008-11-20 23:01:55 +03:00
if (sa_validate_shareopts(strval, proto) !=
SA_OK) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' cannot be set to invalid "
"options"), propname);
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
}
}
break;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case ZFS_PROP_KEYLOCATION:
if (!zfs_prop_valid_keylocation(strval, B_FALSE)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid keylocation"));
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
if (zhp != NULL) {
uint64_t crypt =
zfs_prop_get_int(zhp, ZFS_PROP_ENCRYPTION);
if (crypt == ZIO_CRYPT_OFF &&
strcmp(strval, "none") != 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"keylocation must be 'none' "
"for unencrypted datasets"));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
} else if (crypt != ZIO_CRYPT_OFF &&
strcmp(strval, "none") == 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"keylocation must not be 'none' "
"for encrypted datasets"));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
}
}
break;
case ZFS_PROP_PBKDF2_ITERS:
if (intval < MIN_PBKDF2_ITERATIONS) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"minimum pbkdf2 iterations is %u"),
MIN_PBKDF2_ITERATIONS);
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
}
break;
2008-11-20 23:01:55 +03:00
case ZFS_PROP_UTF8ONLY:
chosen_utf = (int)intval;
break;
2008-11-20 23:01:55 +03:00
case ZFS_PROP_NORMALIZE:
chosen_normal = (int)intval;
break;
default:
break;
2008-11-20 23:01:55 +03:00
}
/*
* For changes to existing volumes, we have some additional
* checks to enforce.
*/
if (type == ZFS_TYPE_VOLUME && zhp != NULL) {
uint64_t blocksize = zfs_prop_get_int(zhp,
ZFS_PROP_VOLBLOCKSIZE);
char buf[64];
switch (prop) {
case ZFS_PROP_VOLSIZE:
if (intval % blocksize != 0) {
zfs_nicebytes(blocksize, buf,
2008-11-20 23:01:55 +03:00
sizeof (buf));
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' must be a multiple of "
"volume block size (%s)"),
propname, buf);
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
}
if (intval == 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' cannot be zero"),
propname);
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
}
break;
default:
break;
2008-11-20 23:01:55 +03:00
}
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/* check encryption properties */
if (zhp != NULL) {
int64_t crypt = zfs_prop_get_int(zhp,
ZFS_PROP_ENCRYPTION);
switch (prop) {
case ZFS_PROP_COPIES:
if (crypt != ZIO_CRYPT_OFF && intval > 2) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"encrypted datasets cannot have "
"3 copies"));
(void) zfs_error(hdl, EZFS_BADPROP,
errbuf);
goto error;
}
break;
default:
break;
}
}
2008-11-20 23:01:55 +03:00
}
/*
* If normalization was chosen, but no UTF8 choice was made,
* enforce rejection of non-UTF8 names.
*
* If normalization was chosen, but rejecting non-UTF8 names
* was explicitly not chosen, it is an error.
*
* If utf8only was turned off, but the parent has normalization,
* turn off normalization.
2008-11-20 23:01:55 +03:00
*/
if (chosen_normal > 0 && chosen_utf < 0) {
if (nvlist_add_uint64(ret,
zfs_prop_to_name(ZFS_PROP_UTF8ONLY), 1) != 0) {
(void) no_memory(hdl);
goto error;
}
} else if (chosen_normal > 0 && chosen_utf == 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"'%s' must be set 'on' if normalization chosen"),
zfs_prop_to_name(ZFS_PROP_UTF8ONLY));
(void) zfs_error(hdl, EZFS_BADPROP, errbuf);
goto error;
} else if (chosen_normal < 0 && chosen_utf == 0) {
if (nvlist_add_uint64(ret,
zfs_prop_to_name(ZFS_PROP_NORMALIZE), 0) != 0) {
(void) no_memory(hdl);
goto error;
}
2008-11-20 23:01:55 +03:00
}
return (ret);
error:
nvlist_free(ret);
return (NULL);
}
static int
zfs_add_synthetic_resv(zfs_handle_t *zhp, nvlist_t *nvl)
{
uint64_t old_volsize;
uint64_t new_volsize;
uint64_t old_reservation;
uint64_t new_reservation;
zfs_prop_t resv_prop;
nvlist_t *props;
zpool_handle_t *zph = zpool_handle(zhp);
2008-11-20 23:01:55 +03:00
/*
* If this is an existing volume, and someone is setting the volsize,
* make sure that it matches the reservation, or add it if necessary.
*/
old_volsize = zfs_prop_get_int(zhp, ZFS_PROP_VOLSIZE);
if (zfs_which_resv_prop(zhp, &resv_prop) < 0)
return (-1);
old_reservation = zfs_prop_get_int(zhp, resv_prop);
props = fnvlist_alloc();
fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
zfs_prop_get_int(zhp, ZFS_PROP_VOLBLOCKSIZE));
if ((zvol_volsize_to_reservation(zph, old_volsize, props) !=
old_reservation) || nvlist_exists(nvl,
zfs_prop_to_name(resv_prop))) {
fnvlist_free(props);
return (0);
2008-11-20 23:01:55 +03:00
}
if (nvlist_lookup_uint64(nvl, zfs_prop_to_name(ZFS_PROP_VOLSIZE),
&new_volsize) != 0) {
fnvlist_free(props);
return (-1);
}
new_reservation = zvol_volsize_to_reservation(zph, new_volsize, props);
fnvlist_free(props);
if (nvlist_add_uint64(nvl, zfs_prop_to_name(resv_prop),
new_reservation) != 0) {
(void) no_memory(zhp->zfs_hdl);
return (-1);
}
return (1);
2008-11-20 23:01:55 +03:00
}
/*
* Helper for 'zfs {set|clone} refreservation=auto'. Must be called after
* zfs_valid_proplist(), as it is what sets the UINT64_MAX sentinel value.
* Return codes must match zfs_add_synthetic_resv().
*/
static int
zfs_fix_auto_resv(zfs_handle_t *zhp, nvlist_t *nvl)
{
uint64_t volsize;
uint64_t resvsize;
zfs_prop_t prop;
nvlist_t *props;
if (!ZFS_IS_VOLUME(zhp)) {
return (0);
}
if (zfs_which_resv_prop(zhp, &prop) != 0) {
return (-1);
}
if (prop != ZFS_PROP_REFRESERVATION) {
return (0);
}
if (nvlist_lookup_uint64(nvl, zfs_prop_to_name(prop), &resvsize) != 0) {
/* No value being set, so it can't be "auto" */
return (0);
}
if (resvsize != UINT64_MAX) {
/* Being set to a value other than "auto" */
return (0);
}
props = fnvlist_alloc();
fnvlist_add_uint64(props, zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
zfs_prop_get_int(zhp, ZFS_PROP_VOLBLOCKSIZE));
if (nvlist_lookup_uint64(nvl, zfs_prop_to_name(ZFS_PROP_VOLSIZE),
&volsize) != 0) {
volsize = zfs_prop_get_int(zhp, ZFS_PROP_VOLSIZE);
}
resvsize = zvol_volsize_to_reservation(zpool_handle(zhp), volsize,
props);
fnvlist_free(props);
(void) nvlist_remove_all(nvl, zfs_prop_to_name(prop));
if (nvlist_add_uint64(nvl, zfs_prop_to_name(prop), resvsize) != 0) {
(void) no_memory(zhp->zfs_hdl);
return (-1);
}
return (1);
}
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
static boolean_t
zfs_is_namespace_prop(zfs_prop_t prop)
{
switch (prop) {
case ZFS_PROP_ATIME:
case ZFS_PROP_RELATIME:
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
case ZFS_PROP_DEVICES:
case ZFS_PROP_EXEC:
case ZFS_PROP_SETUID:
case ZFS_PROP_READONLY:
case ZFS_PROP_XATTR:
case ZFS_PROP_NBMAND:
return (B_TRUE);
default:
return (B_FALSE);
}
}
2008-11-20 23:01:55 +03:00
/*
* Given a property name and value, set the property for the given dataset.
*/
int
zfs_prop_set(zfs_handle_t *zhp, const char *propname, const char *propval)
{
int ret = -1;
char errbuf[1024];
libzfs_handle_t *hdl = zhp->zfs_hdl;
nvlist_t *nvl = NULL;
2008-11-20 23:01:55 +03:00
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot set property for '%s'"),
zhp->zfs_name);
if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0 ||
nvlist_add_string(nvl, propname, propval) != 0) {
(void) no_memory(hdl);
goto error;
}
ret = zfs_prop_set_list(zhp, nvl);
2008-11-20 23:01:55 +03:00
error:
2008-11-20 23:01:55 +03:00
nvlist_free(nvl);
return (ret);
}
2008-11-20 23:01:55 +03:00
/*
* Given an nvlist of property names and values, set the properties for the
* given dataset.
*/
int
zfs_prop_set_list(zfs_handle_t *zhp, nvlist_t *props)
{
zfs_cmd_t zc = {"\0"};
int ret = -1;
prop_changelist_t **cls = NULL;
int cl_idx;
char errbuf[1024];
libzfs_handle_t *hdl = zhp->zfs_hdl;
nvlist_t *nvl;
int nvl_len = 0;
int added_resv = 0;
zfs_prop_t prop = 0;
nvpair_t *elem;
2008-11-20 23:01:55 +03:00
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot set property for '%s'"),
zhp->zfs_name);
if ((nvl = zfs_valid_proplist(hdl, zhp->zfs_type, props,
zfs_prop_get_int(zhp, ZFS_PROP_ZONED), zhp, zhp->zpool_hdl,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
B_FALSE, errbuf)) == NULL)
2008-11-20 23:01:55 +03:00
goto error;
/*
* We have to check for any extra properties which need to be added
* before computing the length of the nvlist.
*/
for (elem = nvlist_next_nvpair(nvl, NULL);
elem != NULL;
elem = nvlist_next_nvpair(nvl, elem)) {
if (zfs_name_to_prop(nvpair_name(elem)) == ZFS_PROP_VOLSIZE &&
(added_resv = zfs_add_synthetic_resv(zhp, nvl)) == -1) {
goto error;
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
}
if (added_resv != 1 &&
(added_resv = zfs_fix_auto_resv(zhp, nvl)) == -1) {
goto error;
}
/*
* Check how many properties we're setting and allocate an array to
* store changelist pointers for postfix().
*/
for (elem = nvlist_next_nvpair(nvl, NULL);
elem != NULL;
elem = nvlist_next_nvpair(nvl, elem))
nvl_len++;
if ((cls = calloc(nvl_len, sizeof (prop_changelist_t *))) == NULL)
goto error;
2008-11-20 23:01:55 +03:00
cl_idx = 0;
for (elem = nvlist_next_nvpair(nvl, NULL);
elem != NULL;
elem = nvlist_next_nvpair(nvl, elem)) {
prop = zfs_name_to_prop(nvpair_name(elem));
assert(cl_idx < nvl_len);
/*
* We don't want to unmount & remount the dataset when changing
* its canmount property to 'on' or 'noauto'. We only use
* the changelist logic to unmount when setting canmount=off.
*/
if (prop != ZFS_PROP_CANMOUNT ||
(fnvpair_value_uint64(elem) == ZFS_CANMOUNT_OFF &&
zfs_is_mounted(zhp, NULL))) {
cls[cl_idx] = changelist_gather(zhp, prop, 0, 0);
if (cls[cl_idx] == NULL)
goto error;
}
if (prop == ZFS_PROP_MOUNTPOINT &&
changelist_haszonedchild(cls[cl_idx])) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"child dataset with inherited mountpoint is used "
"in a non-global zone"));
ret = zfs_error(hdl, EZFS_ZONED, errbuf);
goto error;
}
if (cls[cl_idx] != NULL &&
(ret = changelist_prefix(cls[cl_idx])) != 0)
goto error;
cl_idx++;
}
assert(cl_idx == nvl_len);
2008-11-20 23:01:55 +03:00
/*
* Execute the corresponding ioctl() to set this list of properties.
2008-11-20 23:01:55 +03:00
*/
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
zcmd_write_src_nvlist(hdl, &zc, nvl);
zcmd_alloc_dst_nvlist(hdl, &zc, 0);
2008-11-20 23:01:55 +03:00
ret = zfs_ioctl(hdl, ZFS_IOC_SET_PROP, &zc);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
if (ret != 0) {
if (zc.zc_nvlist_dst_filled == B_FALSE) {
(void) zfs_standard_error(hdl, errno, errbuf);
goto error;
}
/* Get the list of unset properties back and report them. */
nvlist_t *errorprops = NULL;
if (zcmd_read_dst_nvlist(hdl, &zc, &errorprops) != 0)
goto error;
for (nvpair_t *elem = nvlist_next_nvpair(errorprops, NULL);
elem != NULL;
elem = nvlist_next_nvpair(errorprops, elem)) {
prop = zfs_name_to_prop(nvpair_name(elem));
zfs_setprop_error(hdl, prop, errno, errbuf);
}
nvlist_free(errorprops);
if (added_resv && errno == ENOSPC) {
/* clean up the volsize property we tried to set */
uint64_t old_volsize = zfs_prop_get_int(zhp,
ZFS_PROP_VOLSIZE);
nvlist_free(nvl);
nvl = NULL;
zcmd_free_nvlists(&zc);
if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0)
goto error;
if (nvlist_add_uint64(nvl,
zfs_prop_to_name(ZFS_PROP_VOLSIZE),
old_volsize) != 0)
goto error;
zcmd_write_src_nvlist(hdl, &zc, nvl);
(void) zfs_ioctl(hdl, ZFS_IOC_SET_PROP, &zc);
}
2008-11-20 23:01:55 +03:00
} else {
for (cl_idx = 0; cl_idx < nvl_len; cl_idx++) {
if (cls[cl_idx] != NULL) {
int clp_err = changelist_postfix(cls[cl_idx]);
if (clp_err != 0)
ret = clp_err;
}
}
2008-11-20 23:01:55 +03:00
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
if (ret == 0) {
/*
* Refresh the statistics so the new property
* value is reflected.
*/
2008-11-20 23:01:55 +03:00
(void) get_stats(zhp);
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
/*
* Remount the filesystem to propagate the change
* if one of the options handled by the generic
* Linux namespace layer has been modified.
*/
if (zfs_is_namespace_prop(prop) &&
zfs_is_mounted(zhp, NULL))
ret = zfs_mount(zhp, MNTOPT_REMOUNT, 0);
}
2008-11-20 23:01:55 +03:00
}
error:
nvlist_free(nvl);
zcmd_free_nvlists(&zc);
if (cls != NULL) {
for (cl_idx = 0; cl_idx < nvl_len; cl_idx++) {
if (cls[cl_idx] != NULL)
changelist_free(cls[cl_idx]);
}
free(cls);
}
2008-11-20 23:01:55 +03:00
return (ret);
}
/*
* Given a property, inherit the value from the parent dataset, or if received
* is TRUE, revert to the received value, if any.
2008-11-20 23:01:55 +03:00
*/
int
zfs_prop_inherit(zfs_handle_t *zhp, const char *propname, boolean_t received)
2008-11-20 23:01:55 +03:00
{
zfs_cmd_t zc = {"\0"};
2008-11-20 23:01:55 +03:00
int ret;
prop_changelist_t *cl;
libzfs_handle_t *hdl = zhp->zfs_hdl;
char errbuf[1024];
zfs_prop_t prop;
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot inherit %s for '%s'"), propname, zhp->zfs_name);
zc.zc_cookie = received;
2008-11-20 23:01:55 +03:00
if ((prop = zfs_name_to_prop(propname)) == ZPROP_INVAL) {
/*
* For user properties, the amount of work we have to do is very
* small, so just do it here.
*/
if (!zfs_prop_user(propname)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid property"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
}
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
(void) strlcpy(zc.zc_value, propname, sizeof (zc.zc_value));
if (zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_INHERIT_PROP, &zc) != 0)
return (zfs_standard_error(hdl, errno, errbuf));
(void) get_stats(zhp);
2008-11-20 23:01:55 +03:00
return (0);
}
/*
* Verify that this property is inheritable.
*/
if (zfs_prop_readonly(prop))
return (zfs_error(hdl, EZFS_PROPREADONLY, errbuf));
if (!zfs_prop_inheritable(prop) && !received)
2008-11-20 23:01:55 +03:00
return (zfs_error(hdl, EZFS_PROPNONINHERIT, errbuf));
/*
* Check to see if the value applies to this type
*/
if (!zfs_prop_valid_for_type(prop, zhp->zfs_type, B_FALSE))
2008-11-20 23:01:55 +03:00
return (zfs_error(hdl, EZFS_PROPTYPE, errbuf));
/*
* Normalize the name, to get rid of shorthand abbreviations.
2008-11-20 23:01:55 +03:00
*/
propname = zfs_prop_to_name(prop);
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
(void) strlcpy(zc.zc_value, propname, sizeof (zc.zc_value));
if (prop == ZFS_PROP_MOUNTPOINT && getzoneid() == GLOBAL_ZONEID &&
zfs_prop_get_int(zhp, ZFS_PROP_ZONED)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"dataset is used in a non-global zone"));
return (zfs_error(hdl, EZFS_ZONED, errbuf));
}
/*
* Determine datasets which will be affected by this change, if any.
*/
if ((cl = changelist_gather(zhp, prop, 0, 0)) == NULL)
2008-11-20 23:01:55 +03:00
return (-1);
if (prop == ZFS_PROP_MOUNTPOINT && changelist_haszonedchild(cl)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"child dataset with inherited mountpoint is used "
"in a non-global zone"));
ret = zfs_error(hdl, EZFS_ZONED, errbuf);
goto error;
}
if ((ret = changelist_prefix(cl)) != 0)
goto error;
if ((ret = zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_INHERIT_PROP, &zc)) != 0) {
return (zfs_standard_error(hdl, errno, errbuf));
} else {
if ((ret = changelist_postfix(cl)) != 0)
goto error;
/*
* Refresh the statistics so the new property is reflected.
*/
(void) get_stats(zhp);
/*
* Remount the filesystem to propagate the change
* if one of the options handled by the generic
* Linux namespace layer has been modified.
*/
if (zfs_is_namespace_prop(prop) &&
zfs_is_mounted(zhp, NULL))
ret = zfs_mount(zhp, MNTOPT_REMOUNT, 0);
2008-11-20 23:01:55 +03:00
}
error:
changelist_free(cl);
return (ret);
}
/*
* True DSL properties are stored in an nvlist. The following two functions
* extract them appropriately.
*/
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
uint64_t
2008-11-20 23:01:55 +03:00
getprop_uint64(zfs_handle_t *zhp, zfs_prop_t prop, char **source)
{
nvlist_t *nv;
uint64_t value;
*source = NULL;
if (nvlist_lookup_nvlist(zhp->zfs_props,
zfs_prop_to_name(prop), &nv) == 0) {
value = fnvlist_lookup_uint64(nv, ZPROP_VALUE);
2008-11-20 23:01:55 +03:00
(void) nvlist_lookup_string(nv, ZPROP_SOURCE, source);
} else {
2009-07-03 02:44:48 +04:00
verify(!zhp->zfs_props_table ||
zhp->zfs_props_table[prop] == B_TRUE);
2008-11-20 23:01:55 +03:00
value = zfs_prop_default_numeric(prop);
*source = "";
}
return (value);
}
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
static const char *
2008-11-20 23:01:55 +03:00
getprop_string(zfs_handle_t *zhp, zfs_prop_t prop, char **source)
{
nvlist_t *nv;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
const char *value;
2008-11-20 23:01:55 +03:00
*source = NULL;
if (nvlist_lookup_nvlist(zhp->zfs_props,
zfs_prop_to_name(prop), &nv) == 0) {
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
value = fnvlist_lookup_string(nv, ZPROP_VALUE);
2008-11-20 23:01:55 +03:00
(void) nvlist_lookup_string(nv, ZPROP_SOURCE, source);
} else {
2009-07-03 02:44:48 +04:00
verify(!zhp->zfs_props_table ||
zhp->zfs_props_table[prop] == B_TRUE);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
value = zfs_prop_default_string(prop);
2008-11-20 23:01:55 +03:00
*source = "";
}
return (value);
}
static boolean_t
zfs_is_recvd_props_mode(zfs_handle_t *zhp)
{
return (zhp->zfs_props == zhp->zfs_recvd_props);
}
static void
zfs_set_recvd_props_mode(zfs_handle_t *zhp, uint64_t *cookie)
{
*cookie = (uint64_t)(uintptr_t)zhp->zfs_props;
zhp->zfs_props = zhp->zfs_recvd_props;
}
static void
zfs_unset_recvd_props_mode(zfs_handle_t *zhp, uint64_t *cookie)
{
zhp->zfs_props = (nvlist_t *)(uintptr_t)*cookie;
*cookie = 0;
}
2008-11-20 23:01:55 +03:00
/*
* Internal function for getting a numeric property. Both zfs_prop_get() and
* zfs_prop_get_int() are built using this interface.
*
* Certain properties can be overridden using 'mount -o'. In this case, scan
* the contents of the /proc/self/mounts entry, searching for the
* appropriate options. If they differ from the on-disk values, report the
* current values and mark the source "temporary".
2008-11-20 23:01:55 +03:00
*/
static int
get_numeric_property(zfs_handle_t *zhp, zfs_prop_t prop, zprop_source_t *src,
char **source, uint64_t *val)
{
zfs_cmd_t zc = {"\0"};
2008-11-20 23:01:55 +03:00
nvlist_t *zplprops = NULL;
struct mnttab mnt;
char *mntopt_on = NULL;
char *mntopt_off = NULL;
boolean_t received = zfs_is_recvd_props_mode(zhp);
2008-11-20 23:01:55 +03:00
*source = NULL;
/*
* If the property is being fetched for a snapshot, check whether
* the property is valid for the snapshot's head dataset type.
*/
if (zhp->zfs_type == ZFS_TYPE_SNAPSHOT &&
!zfs_prop_valid_for_type(prop, zhp->zfs_head_type, B_TRUE)) {
*val = zfs_prop_default_numeric(prop);
return (-1);
}
2008-11-20 23:01:55 +03:00
switch (prop) {
case ZFS_PROP_ATIME:
mntopt_on = MNTOPT_ATIME;
mntopt_off = MNTOPT_NOATIME;
break;
case ZFS_PROP_RELATIME:
mntopt_on = MNTOPT_RELATIME;
mntopt_off = MNTOPT_NORELATIME;
break;
2008-11-20 23:01:55 +03:00
case ZFS_PROP_DEVICES:
mntopt_on = MNTOPT_DEVICES;
mntopt_off = MNTOPT_NODEVICES;
break;
case ZFS_PROP_EXEC:
mntopt_on = MNTOPT_EXEC;
mntopt_off = MNTOPT_NOEXEC;
break;
case ZFS_PROP_READONLY:
mntopt_on = MNTOPT_RO;
mntopt_off = MNTOPT_RW;
break;
case ZFS_PROP_SETUID:
mntopt_on = MNTOPT_SETUID;
mntopt_off = MNTOPT_NOSETUID;
break;
case ZFS_PROP_XATTR:
mntopt_on = MNTOPT_XATTR;
mntopt_off = MNTOPT_NOXATTR;
break;
case ZFS_PROP_NBMAND:
mntopt_on = MNTOPT_NBMAND;
mntopt_off = MNTOPT_NONBMAND;
break;
default:
break;
2008-11-20 23:01:55 +03:00
}
/*
* Because looking up the mount options is potentially expensive
* (iterating over all of /proc/self/mounts), we defer its
* calculation until we're looking up a property which requires
* its presence.
2008-11-20 23:01:55 +03:00
*/
if (!zhp->zfs_mntcheck &&
undocumented libzfs API changes broke "zfs list" While OpenZFS does permit breaking changes to the libzfs API, we should avoid these changes when reasonably possible, and take steps to mitigate the impact to consumers when changes are necessary. Commit e4288a8397bb1f made a libzfs API change that is especially difficult for consumers because there is no change to the function signatures, only to their behavior. Therefore, consumers can't notice that there was a change at compile time. Also, the API change was incompletely and incorrectly documented. The commit message mentions `zfs_get_prop()` [sic], but all callers of `get_numeric_property()` are impacted: `zfs_prop_get()`, `zfs_prop_get_numeric()`, and `zfs_prop_get_int()`. `zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so it assumes that the filesystem is not mounted. This means that e.g. `zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0. The documentation says that to preserve the previous behavior, callers should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed to do that. However, the existing behavior is actually preserved by initializing `*src=ZPROP_SRC_ALL`, not `NONE`. The code comment above `zfs_prop_get()` says, "src: ... NULL will be treated as ZPROP_SRC_ALL.". However, the code actually treats NULL as ZPROP_SRC_NONE. i.e. `zfs_prop_get(src=NULL)` assumes that the filesystem is not mounted. There are several existing calls which use `src=NULL` which are impacted by the API change, most noticeably those used by `zfs list`, which now assumes that filesystems are not mounted. For example, `zfs list -o name,mounted` previously indicated whether a filesystem was mounted or not, but now it always (incorrectly) indicates that the filesystem is not mounted (`MOUNTED: no`). Similarly, properties that are set at mount time are ignored. E.g. `zfs list -o name,atime` may display an incorrect value if it was set at mount time. To address these problems, this commit reverts commit e4288a8397bb1f: "zfs get: don't lookup mount options when using "-s local"" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11999
2021-05-06 21:24:56 +03:00
(mntopt_on != NULL || prop == ZFS_PROP_MOUNTED)) {
2009-01-16 00:59:39 +03:00
libzfs_handle_t *hdl = zhp->zfs_hdl;
struct mnttab entry;
2008-11-20 23:01:55 +03:00
if (libzfs_mnttab_find(hdl, zhp->zfs_name, &entry) == 0)
2009-01-16 00:59:39 +03:00
zhp->zfs_mntopts = zfs_strdup(hdl,
2008-11-20 23:01:55 +03:00
entry.mnt_mntopts);
zhp->zfs_mntcheck = B_TRUE;
}
if (zhp->zfs_mntopts == NULL)
mnt.mnt_mntopts = "";
else
mnt.mnt_mntopts = zhp->zfs_mntopts;
switch (prop) {
case ZFS_PROP_ATIME:
case ZFS_PROP_RELATIME:
2008-11-20 23:01:55 +03:00
case ZFS_PROP_DEVICES:
case ZFS_PROP_EXEC:
case ZFS_PROP_READONLY:
case ZFS_PROP_SETUID:
#ifndef __FreeBSD__
2008-11-20 23:01:55 +03:00
case ZFS_PROP_XATTR:
#endif
2008-11-20 23:01:55 +03:00
case ZFS_PROP_NBMAND:
*val = getprop_uint64(zhp, prop, source);
if (received)
break;
2008-11-20 23:01:55 +03:00
if (hasmntopt(&mnt, mntopt_on) && !*val) {
*val = B_TRUE;
if (src)
*src = ZPROP_SRC_TEMPORARY;
} else if (hasmntopt(&mnt, mntopt_off) && *val) {
*val = B_FALSE;
if (src)
*src = ZPROP_SRC_TEMPORARY;
}
break;
case ZFS_PROP_CANMOUNT:
case ZFS_PROP_VOLSIZE:
2008-11-20 23:01:55 +03:00
case ZFS_PROP_QUOTA:
case ZFS_PROP_REFQUOTA:
case ZFS_PROP_RESERVATION:
case ZFS_PROP_REFRESERVATION:
case ZFS_PROP_FILESYSTEM_LIMIT:
case ZFS_PROP_SNAPSHOT_LIMIT:
case ZFS_PROP_FILESYSTEM_COUNT:
case ZFS_PROP_SNAPSHOT_COUNT:
2008-11-20 23:01:55 +03:00
*val = getprop_uint64(zhp, prop, source);
if (*source == NULL) {
/* not default, must be local */
2008-11-20 23:01:55 +03:00
*source = zhp->zfs_name;
}
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_MOUNTED:
*val = (zhp->zfs_mntopts != NULL);
break;
case ZFS_PROP_NUMCLONES:
*val = zhp->zfs_dmustats.dds_num_clones;
break;
case ZFS_PROP_VERSION:
case ZFS_PROP_NORMALIZE:
case ZFS_PROP_UTF8ONLY:
case ZFS_PROP_CASE:
zcmd_alloc_dst_nvlist(zhp->zfs_hdl, &zc, 0);
2008-11-20 23:01:55 +03:00
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
if (zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_OBJSET_ZPLPROPS, &zc)) {
zcmd_free_nvlists(&zc);
if (prop == ZFS_PROP_VERSION &&
zhp->zfs_type == ZFS_TYPE_VOLUME)
*val = zfs_prop_default_numeric(prop);
2009-08-18 22:43:27 +04:00
return (-1);
2008-11-20 23:01:55 +03:00
}
if (zcmd_read_dst_nvlist(zhp->zfs_hdl, &zc, &zplprops) != 0 ||
nvlist_lookup_uint64(zplprops, zfs_prop_to_name(prop),
val) != 0) {
zcmd_free_nvlists(&zc);
2009-08-18 22:43:27 +04:00
return (-1);
2008-11-20 23:01:55 +03:00
}
nvlist_free(zplprops);
2008-11-20 23:01:55 +03:00
zcmd_free_nvlists(&zc);
break;
case ZFS_PROP_INCONSISTENT:
*val = zhp->zfs_dmustats.dds_inconsistent;
break;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case ZFS_PROP_REDACTED:
*val = zhp->zfs_dmustats.dds_redacted;
break;
2008-11-20 23:01:55 +03:00
default:
switch (zfs_prop_get_type(prop)) {
case PROP_TYPE_NUMBER:
case PROP_TYPE_INDEX:
*val = getprop_uint64(zhp, prop, source);
/*
2009-07-03 02:44:48 +04:00
* If we tried to use a default value for a
* readonly property, it means that it was not
* present. Note this only applies to "truly"
* readonly properties, not set-once properties
* like volblocksize.
*/
if (zfs_prop_readonly(prop) &&
!zfs_prop_setonce(prop) &&
*source != NULL && (*source)[0] == '\0') {
*source = NULL;
return (-1);
}
2008-11-20 23:01:55 +03:00
break;
case PROP_TYPE_STRING:
default:
zfs_error_aux(zhp->zfs_hdl, dgettext(TEXT_DOMAIN,
"cannot get non-numeric property"));
return (zfs_error(zhp->zfs_hdl, EZFS_BADPROP,
dgettext(TEXT_DOMAIN, "internal error")));
}
}
return (0);
}
/*
* Calculate the source type, given the raw source string.
*/
static void
get_source(zfs_handle_t *zhp, zprop_source_t *srctype, char *source,
char *statbuf, size_t statlen)
{
if (statbuf == NULL ||
srctype == NULL || *srctype == ZPROP_SRC_TEMPORARY) {
2008-11-20 23:01:55 +03:00
return;
}
2008-11-20 23:01:55 +03:00
if (source == NULL) {
*srctype = ZPROP_SRC_NONE;
} else if (source[0] == '\0') {
*srctype = ZPROP_SRC_DEFAULT;
} else if (strstr(source, ZPROP_SOURCE_VAL_RECVD) != NULL) {
*srctype = ZPROP_SRC_RECEIVED;
2008-11-20 23:01:55 +03:00
} else {
if (strcmp(source, zhp->zfs_name) == 0) {
*srctype = ZPROP_SRC_LOCAL;
} else {
(void) strlcpy(statbuf, source, statlen);
*srctype = ZPROP_SRC_INHERITED;
}
}
}
int
zfs_prop_get_recvd(zfs_handle_t *zhp, const char *propname, char *propbuf,
size_t proplen, boolean_t literal)
{
zfs_prop_t prop;
int err = 0;
if (zhp->zfs_recvd_props == NULL)
if (get_recvd_props_ioctl(zhp) != 0)
return (-1);
prop = zfs_name_to_prop(propname);
if (prop != ZPROP_INVAL) {
uint64_t cookie;
if (!nvlist_exists(zhp->zfs_recvd_props, propname))
return (-1);
zfs_set_recvd_props_mode(zhp, &cookie);
err = zfs_prop_get(zhp, prop, propbuf, proplen,
NULL, NULL, 0, literal);
zfs_unset_recvd_props_mode(zhp, &cookie);
} else {
nvlist_t *propval;
char *recvdval;
if (nvlist_lookup_nvlist(zhp->zfs_recvd_props,
propname, &propval) != 0)
return (-1);
recvdval = fnvlist_lookup_string(propval, ZPROP_VALUE);
(void) strlcpy(propbuf, recvdval, proplen);
}
return (err == 0 ? 0 : -1);
}
static int
get_clones_string(zfs_handle_t *zhp, char *propbuf, size_t proplen)
{
nvlist_t *value;
nvpair_t *pair;
value = zfs_get_clones_nvl(zhp);
if (value == NULL || nvlist_empty(value))
return (-1);
propbuf[0] = '\0';
for (pair = nvlist_next_nvpair(value, NULL); pair != NULL;
pair = nvlist_next_nvpair(value, pair)) {
if (propbuf[0] != '\0')
(void) strlcat(propbuf, ",", proplen);
(void) strlcat(propbuf, nvpair_name(pair), proplen);
}
return (0);
}
struct get_clones_arg {
uint64_t numclones;
nvlist_t *value;
const char *origin;
char buf[ZFS_MAX_DATASET_NAME_LEN];
};
static int
get_clones_cb(zfs_handle_t *zhp, void *arg)
{
struct get_clones_arg *gca = arg;
if (gca->numclones == 0) {
zfs_close(zhp);
return (0);
}
if (zfs_prop_get(zhp, ZFS_PROP_ORIGIN, gca->buf, sizeof (gca->buf),
NULL, NULL, 0, B_TRUE) != 0)
goto out;
if (strcmp(gca->buf, gca->origin) == 0) {
fnvlist_add_boolean(gca->value, zfs_get_name(zhp));
gca->numclones--;
}
out:
(void) zfs_iter_children(zhp, get_clones_cb, gca);
zfs_close(zhp);
return (0);
}
nvlist_t *
zfs_get_clones_nvl(zfs_handle_t *zhp)
{
nvlist_t *nv, *value;
if (nvlist_lookup_nvlist(zhp->zfs_props,
zfs_prop_to_name(ZFS_PROP_CLONES), &nv) != 0) {
struct get_clones_arg gca;
/*
* if this is a snapshot, then the kernel wasn't able
* to get the clones. Do it by slowly iterating.
*/
if (zhp->zfs_type != ZFS_TYPE_SNAPSHOT)
return (NULL);
if (nvlist_alloc(&nv, NV_UNIQUE_NAME, 0) != 0)
return (NULL);
if (nvlist_alloc(&value, NV_UNIQUE_NAME, 0) != 0) {
nvlist_free(nv);
return (NULL);
}
gca.numclones = zfs_prop_get_int(zhp, ZFS_PROP_NUMCLONES);
gca.value = value;
gca.origin = zhp->zfs_name;
if (gca.numclones != 0) {
zfs_handle_t *root;
char pool[ZFS_MAX_DATASET_NAME_LEN];
char *cp = pool;
/* get the pool name */
(void) strlcpy(pool, zhp->zfs_name, sizeof (pool));
(void) strsep(&cp, "/@");
root = zfs_open(zhp->zfs_hdl, pool,
ZFS_TYPE_FILESYSTEM);
if (root == NULL) {
nvlist_free(nv);
nvlist_free(value);
return (NULL);
}
(void) get_clones_cb(root, &gca);
}
if (gca.numclones != 0 ||
nvlist_add_nvlist(nv, ZPROP_VALUE, value) != 0 ||
nvlist_add_nvlist(zhp->zfs_props,
zfs_prop_to_name(ZFS_PROP_CLONES), nv) != 0) {
nvlist_free(nv);
nvlist_free(value);
return (NULL);
}
nvlist_free(nv);
nvlist_free(value);
nv = fnvlist_lookup_nvlist(zhp->zfs_props,
zfs_prop_to_name(ZFS_PROP_CLONES));
}
return (fnvlist_lookup_nvlist(nv, ZPROP_VALUE));
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static int
get_rsnaps_string(zfs_handle_t *zhp, char *propbuf, size_t proplen)
{
nvlist_t *value;
uint64_t *snaps;
uint_t nsnaps;
if (nvlist_lookup_nvlist(zhp->zfs_props,
zfs_prop_to_name(ZFS_PROP_REDACT_SNAPS), &value) != 0)
return (-1);
if (nvlist_lookup_uint64_array(value, ZPROP_VALUE, &snaps,
&nsnaps) != 0)
return (-1);
if (nsnaps == 0) {
/* There's no redaction snapshots; pass a special value back */
(void) snprintf(propbuf, proplen, "none");
return (0);
}
propbuf[0] = '\0';
for (int i = 0; i < nsnaps; i++) {
char buf[128];
if (propbuf[0] != '\0')
(void) strlcat(propbuf, ",", proplen);
(void) snprintf(buf, sizeof (buf), "%llu",
(u_longlong_t)snaps[i]);
(void) strlcat(propbuf, buf, proplen);
}
return (0);
}
/*
* Accepts a property and value and checks that the value
* matches the one found by the channel program. If they are
* not equal, print both of them.
*/
static void
zcp_check(zfs_handle_t *zhp, zfs_prop_t prop, uint64_t intval,
const char *strval)
{
if (!zhp->zfs_hdl->libzfs_prop_debug)
return;
int error;
char *poolname = zhp->zpool_hdl->zpool_name;
const char *prop_name = zfs_prop_to_name(prop);
const char *program =
"args = ...\n"
"ds = args['dataset']\n"
"prop = args['property']\n"
"value, setpoint = zfs.get_prop(ds, prop)\n"
"return {value=value, setpoint=setpoint}\n";
nvlist_t *outnvl;
nvlist_t *retnvl;
nvlist_t *argnvl = fnvlist_alloc();
fnvlist_add_string(argnvl, "dataset", zhp->zfs_name);
fnvlist_add_string(argnvl, "property", zfs_prop_to_name(prop));
OpenZFS 8677 - Open-Context Channel Programs Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Chris Williamson <chris.williamson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
2018-02-08 19:35:09 +03:00
error = lzc_channel_program_nosync(poolname, program,
10 * 1000 * 1000, 10 * 1024 * 1024, argnvl, &outnvl);
if (error == 0) {
retnvl = fnvlist_lookup_nvlist(outnvl, "return");
if (zfs_prop_get_type(prop) == PROP_TYPE_NUMBER) {
int64_t ans;
error = nvlist_lookup_int64(retnvl, "value", &ans);
if (error != 0) {
(void) fprintf(stderr, "%s: zcp check error: "
"%u\n", prop_name, error);
return;
}
if (ans != intval) {
(void) fprintf(stderr, "%s: zfs found %llu, "
"but zcp found %llu\n", prop_name,
(u_longlong_t)intval, (u_longlong_t)ans);
}
} else {
char *str_ans;
error = nvlist_lookup_string(retnvl, "value", &str_ans);
if (error != 0) {
(void) fprintf(stderr, "%s: zcp check error: "
"%u\n", prop_name, error);
return;
}
if (strcmp(strval, str_ans) != 0) {
(void) fprintf(stderr,
"%s: zfs found '%s', but zcp found '%s'\n",
prop_name, strval, str_ans);
}
}
} else {
(void) fprintf(stderr, "%s: zcp check failed, channel program "
"error: %u\n", prop_name, error);
}
nvlist_free(argnvl);
nvlist_free(outnvl);
}
2008-11-20 23:01:55 +03:00
/*
undocumented libzfs API changes broke "zfs list" While OpenZFS does permit breaking changes to the libzfs API, we should avoid these changes when reasonably possible, and take steps to mitigate the impact to consumers when changes are necessary. Commit e4288a8397bb1f made a libzfs API change that is especially difficult for consumers because there is no change to the function signatures, only to their behavior. Therefore, consumers can't notice that there was a change at compile time. Also, the API change was incompletely and incorrectly documented. The commit message mentions `zfs_get_prop()` [sic], but all callers of `get_numeric_property()` are impacted: `zfs_prop_get()`, `zfs_prop_get_numeric()`, and `zfs_prop_get_int()`. `zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so it assumes that the filesystem is not mounted. This means that e.g. `zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0. The documentation says that to preserve the previous behavior, callers should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed to do that. However, the existing behavior is actually preserved by initializing `*src=ZPROP_SRC_ALL`, not `NONE`. The code comment above `zfs_prop_get()` says, "src: ... NULL will be treated as ZPROP_SRC_ALL.". However, the code actually treats NULL as ZPROP_SRC_NONE. i.e. `zfs_prop_get(src=NULL)` assumes that the filesystem is not mounted. There are several existing calls which use `src=NULL` which are impacted by the API change, most noticeably those used by `zfs list`, which now assumes that filesystems are not mounted. For example, `zfs list -o name,mounted` previously indicated whether a filesystem was mounted or not, but now it always (incorrectly) indicates that the filesystem is not mounted (`MOUNTED: no`). Similarly, properties that are set at mount time are ignored. E.g. `zfs list -o name,atime` may display an incorrect value if it was set at mount time. To address these problems, this commit reverts commit e4288a8397bb1f: "zfs get: don't lookup mount options when using "-s local"" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11999
2021-05-06 21:24:56 +03:00
* Retrieve a property from the given object. If 'literal' is specified, then
* numbers are left as exact values. Otherwise, numbers are converted to a
* human-readable form.
2008-11-20 23:01:55 +03:00
*
* Returns 0 on success, or -1 on error.
*/
int
zfs_prop_get(zfs_handle_t *zhp, zfs_prop_t prop, char *propbuf, size_t proplen,
zprop_source_t *src, char *statbuf, size_t statlen, boolean_t literal)
{
char *source = NULL;
uint64_t val;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
const char *str;
2008-11-20 23:01:55 +03:00
const char *strval;
boolean_t received = zfs_is_recvd_props_mode(zhp);
2008-11-20 23:01:55 +03:00
/*
* Check to see if this property applies to our object
*/
if (!zfs_prop_valid_for_type(prop, zhp->zfs_type, B_FALSE))
2008-11-20 23:01:55 +03:00
return (-1);
if (received && zfs_prop_readonly(prop))
return (-1);
undocumented libzfs API changes broke "zfs list" While OpenZFS does permit breaking changes to the libzfs API, we should avoid these changes when reasonably possible, and take steps to mitigate the impact to consumers when changes are necessary. Commit e4288a8397bb1f made a libzfs API change that is especially difficult for consumers because there is no change to the function signatures, only to their behavior. Therefore, consumers can't notice that there was a change at compile time. Also, the API change was incompletely and incorrectly documented. The commit message mentions `zfs_get_prop()` [sic], but all callers of `get_numeric_property()` are impacted: `zfs_prop_get()`, `zfs_prop_get_numeric()`, and `zfs_prop_get_int()`. `zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so it assumes that the filesystem is not mounted. This means that e.g. `zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0. The documentation says that to preserve the previous behavior, callers should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed to do that. However, the existing behavior is actually preserved by initializing `*src=ZPROP_SRC_ALL`, not `NONE`. The code comment above `zfs_prop_get()` says, "src: ... NULL will be treated as ZPROP_SRC_ALL.". However, the code actually treats NULL as ZPROP_SRC_NONE. i.e. `zfs_prop_get(src=NULL)` assumes that the filesystem is not mounted. There are several existing calls which use `src=NULL` which are impacted by the API change, most noticeably those used by `zfs list`, which now assumes that filesystems are not mounted. For example, `zfs list -o name,mounted` previously indicated whether a filesystem was mounted or not, but now it always (incorrectly) indicates that the filesystem is not mounted (`MOUNTED: no`). Similarly, properties that are set at mount time are ignored. E.g. `zfs list -o name,atime` may display an incorrect value if it was set at mount time. To address these problems, this commit reverts commit e4288a8397bb1f: "zfs get: don't lookup mount options when using "-s local"" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11999
2021-05-06 21:24:56 +03:00
if (src)
*src = ZPROP_SRC_NONE;
2008-11-20 23:01:55 +03:00
switch (prop) {
case ZFS_PROP_CREATION:
/*
* 'creation' is a time_t stored in the statistics. We convert
* this into a string unless 'literal' is specified.
*/
{
val = getprop_uint64(zhp, prop, &source);
time_t time = (time_t)val;
struct tm t;
if (literal ||
localtime_r(&time, &t) == NULL ||
strftime(propbuf, proplen, "%a %b %e %k:%M %Y",
&t) == 0)
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)val);
2008-11-20 23:01:55 +03:00
}
zcp_check(zhp, prop, val, NULL);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_MOUNTPOINT:
/*
* Getting the precise mountpoint can be tricky.
*
* - for 'none' or 'legacy', return those values.
* - for inherited mountpoints, we want to take everything
* after our ancestor and append it to the inherited value.
*
* If the pool has an alternate root, we want to prepend that
* root to any values we return.
*/
2008-11-20 23:01:55 +03:00
str = getprop_string(zhp, prop, &source);
if (str[0] == '/') {
char buf[MAXPATHLEN];
char *root = buf;
const char *relpath;
2008-11-20 23:01:55 +03:00
/*
* If we inherit the mountpoint, even from a dataset
* with a received value, the source will be the path of
* the dataset we inherit from. If source is
* ZPROP_SOURCE_VAL_RECVD, the received value is not
* inherited.
*/
if (strcmp(source, ZPROP_SOURCE_VAL_RECVD) == 0) {
relpath = "";
} else {
relpath = zhp->zfs_name + strlen(source);
if (relpath[0] == '/')
relpath++;
}
if ((zpool_get_prop(zhp->zpool_hdl,
ZPOOL_PROP_ALTROOT, buf, MAXPATHLEN, NULL,
B_FALSE)) || (strcmp(root, "-") == 0))
root[0] = '\0';
/*
* Special case an alternate root of '/'. This will
* avoid having multiple leading slashes in the
* mountpoint path.
*/
if (strcmp(root, "/") == 0)
root++;
/*
* If the mountpoint is '/' then skip over this
* if we are obtaining either an alternate root or
* an inherited mountpoint.
*/
if (str[1] == '\0' && (root[0] != '\0' ||
relpath[0] != '\0'))
2008-11-20 23:01:55 +03:00
str++;
if (relpath[0] == '\0')
(void) snprintf(propbuf, proplen, "%s%s",
root, str);
else
(void) snprintf(propbuf, proplen, "%s%s%s%s",
root, str, relpath[0] == '@' ? "" : "/",
relpath);
} else {
/* 'legacy' or 'none' */
(void) strlcpy(propbuf, str, proplen);
}
zcp_check(zhp, prop, 0, propbuf);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_ORIGIN:
str = getprop_string(zhp, prop, &source);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
if (str == NULL)
2008-11-20 23:01:55 +03:00
return (-1);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
(void) strlcpy(propbuf, str, proplen);
zcp_check(zhp, prop, 0, str);
2008-11-20 23:01:55 +03:00
break;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case ZFS_PROP_REDACT_SNAPS:
if (get_rsnaps_string(zhp, propbuf, proplen) != 0)
return (-1);
break;
case ZFS_PROP_CLONES:
if (get_clones_string(zhp, propbuf, proplen) != 0)
return (-1);
break;
2008-11-20 23:01:55 +03:00
case ZFS_PROP_QUOTA:
case ZFS_PROP_REFQUOTA:
case ZFS_PROP_RESERVATION:
case ZFS_PROP_REFRESERVATION:
if (get_numeric_property(zhp, prop, src, &source, &val) != 0)
return (-1);
/*
* If quota or reservation is 0, we translate this into 'none'
* (unless literal is set), and indicate that it's the default
* value. Otherwise, we print the number nicely and indicate
* that its set locally.
*/
if (val == 0) {
if (literal)
(void) strlcpy(propbuf, "0", proplen);
else
(void) strlcpy(propbuf, "none", proplen);
} else {
if (literal)
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)val);
else
zfs_nicebytes(val, propbuf, proplen);
2008-11-20 23:01:55 +03:00
}
zcp_check(zhp, prop, val, NULL);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_FILESYSTEM_LIMIT:
case ZFS_PROP_SNAPSHOT_LIMIT:
case ZFS_PROP_FILESYSTEM_COUNT:
case ZFS_PROP_SNAPSHOT_COUNT:
if (get_numeric_property(zhp, prop, src, &source, &val) != 0)
return (-1);
/*
* If limit is UINT64_MAX, we translate this into 'none', and
* indicate that it's the default value. Otherwise, we print
* the number nicely and indicate that it's set locally.
*/
if (val == UINT64_MAX) {
(void) strlcpy(propbuf, "none", proplen);
} else if (literal) {
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)val);
} else {
zfs_nicenum(val, propbuf, proplen);
}
zcp_check(zhp, prop, val, NULL);
break;
case ZFS_PROP_REFRATIO:
2008-11-20 23:01:55 +03:00
case ZFS_PROP_COMPRESSRATIO:
if (get_numeric_property(zhp, prop, src, &source, &val) != 0)
return (-1);
if (literal)
(void) snprintf(propbuf, proplen, "%llu.%02llu",
(u_longlong_t)(val / 100),
(u_longlong_t)(val % 100));
else
(void) snprintf(propbuf, proplen, "%llu.%02llux",
(u_longlong_t)(val / 100),
(u_longlong_t)(val % 100));
zcp_check(zhp, prop, val, NULL);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_TYPE:
switch (zhp->zfs_type) {
case ZFS_TYPE_FILESYSTEM:
str = "filesystem";
break;
case ZFS_TYPE_VOLUME:
str = "volume";
break;
case ZFS_TYPE_SNAPSHOT:
str = "snapshot";
break;
case ZFS_TYPE_BOOKMARK:
str = "bookmark";
break;
2008-11-20 23:01:55 +03:00
default:
abort();
}
(void) snprintf(propbuf, proplen, "%s", str);
zcp_check(zhp, prop, 0, propbuf);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_MOUNTED:
/*
* The 'mounted' property is a pseudo-property that described
* whether the filesystem is currently mounted. Even though
* it's a boolean value, the typical values of "on" and "off"
* don't make sense, so we translate to "yes" and "no".
*/
if (get_numeric_property(zhp, ZFS_PROP_MOUNTED,
src, &source, &val) != 0)
return (-1);
if (val)
(void) strlcpy(propbuf, "yes", proplen);
else
(void) strlcpy(propbuf, "no", proplen);
break;
case ZFS_PROP_NAME:
/*
* The 'name' property is a pseudo-property derived from the
* dataset name. It is presented as a real property to simplify
* consumers.
*/
(void) strlcpy(propbuf, zhp->zfs_name, proplen);
zcp_check(zhp, prop, 0, propbuf);
2008-11-20 23:01:55 +03:00
break;
case ZFS_PROP_MLSLABEL:
{
#ifdef HAVE_MLSLABEL
m_label_t *new_sl = NULL;
char *ascii = NULL; /* human readable label */
(void) strlcpy(propbuf,
getprop_string(zhp, prop, &source), proplen);
if (literal || (strcasecmp(propbuf,
ZFS_MLSLABEL_DEFAULT) == 0))
break;
/*
* Try to translate the internal hex string to
* human-readable output. If there are any
* problems just use the hex string.
*/
if (str_to_label(propbuf, &new_sl, MAC_LABEL,
L_NO_CORRECTION, NULL) == -1) {
m_label_free(new_sl);
break;
}
if (label_to_str(new_sl, &ascii, M_LABEL,
DEF_NAMES) != 0) {
if (ascii)
free(ascii);
m_label_free(new_sl);
break;
}
m_label_free(new_sl);
(void) strlcpy(propbuf, ascii, proplen);
free(ascii);
#else
(void) strlcpy(propbuf,
getprop_string(zhp, prop, &source), proplen);
#endif /* HAVE_MLSLABEL */
}
break;
case ZFS_PROP_GUID:
Flex non-pretty-printed properties and raw-/pretty-print remaining ones Before: nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null Sun 20 Feb 03:57:44 CET 2022 NAME SIZE ALLOC FREE CKPOINT EXPANDSZ GUID LOAD_GUID FRAG CAP DEDUP HEALTH ALTROOT GUID DEDUPDITTO LOAD_GUID MAXBLOCKSIZE MAXDNODESIZE filling 25.5T 6.52T 18.9T - 64M 11512889483096932869 11656109927366648364 1% 25% 1.00x ONLINE - 11512889483096932869 0 11656109927366648364 1048576 16384 tarta-boot 240M 50.6M 189M - - 2372068846917849656 7752280792179633787 12% 21% 1.00x ONLINE - 2372068846917849656 0 7752280792179633787 1048576 512 tarta-zoot 55.5G 6.42G 49.1G - - 12971868889665384604 8622632123393589527 17% 11% 1.00x ONLINE - 12971868889665384604 0 8622632123393589527 1048576 16384 nabijaczleweli@tarta:~/store/code/zfs$ /sbin/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot NAME GUID KEYGUID IVSETGUID CREATETXG OBJSETID PBKDF2ITERS REFRATIO tarta-zoot 1110930838977259561 659P - 1 54 0 1.03x tarta-zoot/PAGEFILE.SYS 2202570496672997800 3.20E - 2163 1539 0 1.07x tarta-zoot/dupa 16941280502417785695 9.81E - 2274707 1322 1000000000000 1.00x tarta-zoot/etc 17029963068508333530 12.9E - 3663 1087 0 1.52x tarta-zoot/home 3508163802370032575 8.50E - 3664 294 0 1.00x tarta-zoot/home/misio 7283672744014848555 13.0E - 3665 302 0 2.28x tarta-zoot/home/nabijaczleweli 12286744508078616303 5.15E - 3666 200 0 2.05x tarta-zoot/home/nabijaczleweli/tftp 13551632689932817643 5.16E - 3667 1095 0 1.00x tarta-zoot/home/root 5203106193060067946 15.4E - 3668 698 0 2.86x tarta-zoot/home/shared-config 8866040021005142194 14.5E - 3670 2069 0 1.20x tarta-zoot/home/tymek 9472751824283011822 4.56E - 3671 1202 0 1.32x tarta-zoot/oldboot 10460192444135730377 13.8E - 2268398 1232 0 1.01x tarta-zoot/opt 9945621324983170410 5.84E - 3672 1210 0 1.00x tarta-zoot/opt/icecc 13178238931846132425 9.04E - 3673 1103 0 2.83x tarta-zoot/opt/swtpm 10172962421514870859 4.13E - 825669 145132 0 1.87x tarta-zoot/srv 217179989022738337 3.90E - 3674 2469 0 1.00x tarta-zoot/usr 12214213243060765090 15.0E - 3675 2477 0 2.58x tarta-zoot/usr/local 7542700368693813134 941P - 3676 2484 0 2.33x tarta-zoot/var 13414177124447929530 10.2E - 3677 2492 0 1.57x tarta-zoot/var/lib 6969944550407159241 5.28E - 3678 2499 0 2.34x tarta-zoot/var/tmp 6399468088048343912 1.34E - 3679 1218 0 3.95x After: nabijaczleweli@tarta:~/store/code/zfs$ cmd/zpool/zpool list -Td -o name,size,alloc,free,ckpoint,expandsz,guid,load_guid,frag,cap,dedup,health,altroot,guid,dedupditto,load_guid,maxblocksize,maxdnodesize 2>/dev/null Sun 20 Feb 03:57:42 CET 2022 NAME SIZE ALLOC FREE CKPOINT EXPANDSZ GUID LOAD_GUID FRAG CAP DEDUP HEALTH ALTROOT GUID DEDUPDITTO LOAD_GUID MAXBLOCKSIZE MAXDNODESIZE filling 25.5T 6.52T 18.9T - 64M 11512889483096932869 11656109927366648364 1% 25% 1.00x ONLINE - 11512889483096932869 0 11656109927366648364 1M 16K tarta-boot 240M 50.6M 189M - - 2372068846917849656 7752280792179633787 12% 21% 1.00x ONLINE - 2372068846917849656 0 7752280792179633787 1M 512 tarta-zoot 55.5G 6.42G 49.1G - - 12971868889665384604 8622632123393589527 17% 11% 1.00x ONLINE - 12971868889665384604 0 8622632123393589527 1M 16K nabijaczleweli@tarta:~/store/code/zfs$ cmd/zfs/zfs list -o name,guid,keyguid,ivsetguid,createtxg,objsetid,pbkdf2iters,refratio -r tarta-zoot NAME GUID KEYGUID IVSETGUID CREATETXG OBJSETID PBKDF2ITERS REFRATIO tarta-zoot 1110930838977259561 741529699813639505 - 1 54 0 1.03x tarta-zoot/PAGEFILE.SYS 2202570496672997800 3689529982640017884 - 2163 1539 0 1.07x tarta-zoot/dupa 16941280502417785695 11312442953423259518 - 2274707 1322 1000000000000 1.00x tarta-zoot/etc 17029963068508333530 14852574366795347233 - 3663 1087 0 1.52x tarta-zoot/home 3508163802370032575 9802810070759776956 - 3664 294 0 1.00x tarta-zoot/home/misio 7283672744014848555 14983161489316798151 - 3665 302 0 2.28x tarta-zoot/home/nabijaczleweli 12286744508078616303 5937870537299886218 - 3666 200 0 2.05x tarta-zoot/home/nabijaczleweli/tftp 13551632689932817643 5950522828900813054 - 3667 1095 0 1.00x tarta-zoot/home/root 5203106193060067946 17718025091255443518 - 3668 698 0 2.86x tarta-zoot/home/shared-config 8866040021005142194 16716354482778968577 - 3670 2069 0 1.20x tarta-zoot/home/tymek 9472751824283011822 5251854710505749954 - 3671 1202 0 1.32x tarta-zoot/oldboot 10460192444135730377 15894065034622168157 - 2268398 1232 0 1.01x tarta-zoot/opt 9945621324983170410 6737735639539098405 - 3672 1210 0 1.00x tarta-zoot/opt/icecc 13178238931846132425 10425145983015238428 - 3673 1103 0 2.83x tarta-zoot/opt/swtpm 10172962421514870859 4764783754852521469 - 825669 145132 0 1.87x tarta-zoot/srv 217179989022738337 4492810461439647259 - 3674 2469 0 1.00x tarta-zoot/usr 12214213243060765090 17306702395865262834 - 3675 2477 0 2.58x tarta-zoot/usr/local 7542700368693813134 1059954157997659784 - 3676 2484 0 2.33x tarta-zoot/var 13414177124447929530 11764397504176937123 - 3677 2492 0 1.57x tarta-zoot/var/lib 6969944550407159241 6084753728494937404 - 3678 2499 0 2.34x tarta-zoot/var/tmp 6399468088048343912 1548692824635344277 - 3679 1218 0 3.95x Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13122 Closes #13125
2022-02-20 05:07:25 +03:00
case ZFS_PROP_KEY_GUID:
case ZFS_PROP_IVSET_GUID:
case ZFS_PROP_CREATETXG:
case ZFS_PROP_OBJSETID:
case ZFS_PROP_PBKDF2_ITERS:
/*
* These properties are stored as numbers, but they are
* identifiers or counters.
* We don't want them to be pretty printed, because pretty
* printing truncates their values making them useless.
*/
if (get_numeric_property(zhp, prop, src, &source, &val) != 0)
return (-1);
(void) snprintf(propbuf, proplen, "%llu", (u_longlong_t)val);
zcp_check(zhp, prop, val, NULL);
break;
case ZFS_PROP_REFERENCED:
case ZFS_PROP_AVAILABLE:
case ZFS_PROP_USED:
case ZFS_PROP_USEDSNAP:
case ZFS_PROP_USEDDS:
case ZFS_PROP_USEDREFRESERV:
case ZFS_PROP_USEDCHILD:
if (get_numeric_property(zhp, prop, src, &source, &val) != 0)
return (-1);
if (literal) {
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)val);
} else {
zfs_nicebytes(val, propbuf, proplen);
}
zcp_check(zhp, prop, val, NULL);
break;
2008-11-20 23:01:55 +03:00
default:
switch (zfs_prop_get_type(prop)) {
case PROP_TYPE_NUMBER:
if (get_numeric_property(zhp, prop, src,
&source, &val) != 0) {
2008-11-20 23:01:55 +03:00
return (-1);
}
if (literal) {
2008-11-20 23:01:55 +03:00
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)val);
} else {
2008-11-20 23:01:55 +03:00
zfs_nicenum(val, propbuf, proplen);
}
zcp_check(zhp, prop, val, NULL);
2008-11-20 23:01:55 +03:00
break;
case PROP_TYPE_STRING:
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
str = getprop_string(zhp, prop, &source);
if (str == NULL)
return (-1);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
(void) strlcpy(propbuf, str, proplen);
zcp_check(zhp, prop, 0, str);
2008-11-20 23:01:55 +03:00
break;
case PROP_TYPE_INDEX:
if (get_numeric_property(zhp, prop, src,
&source, &val) != 0)
return (-1);
if (zfs_prop_index_to_string(prop, val, &strval) != 0)
return (-1);
2008-11-20 23:01:55 +03:00
(void) strlcpy(propbuf, strval, proplen);
zcp_check(zhp, prop, 0, strval);
2008-11-20 23:01:55 +03:00
break;
default:
abort();
}
}
get_source(zhp, src, source, statbuf, statlen);
return (0);
}
/*
* Utility function to get the given numeric property. Does no validation that
* the given property is the appropriate type; should only be used with
* hard-coded property types.
*/
uint64_t
zfs_prop_get_int(zfs_handle_t *zhp, zfs_prop_t prop)
{
char *source;
Build user-space with different gcc optimization levels This fix resolves warnings reported during compiling of user-space libraries with different gcc optimization levels. Tested with gcc versions: 4.9.2 (Debian), and 6.1.1 (Fedora). The patch enables use of following opt levels: O0, O1, O2, O3, Og, Os, Ofast. List of warnings: [GCC 4.9.2 -Os] libzfs_sendrecv.c:3726:26: error: 'clp' may be used uninitialized in this function [-Werror=maybe-uninitialized] [GCC 4.9.2 -Og] fs_fletcher.c:323:26: error: 'idx' may be used uninitialized in this function [-Werror=maybe-uninitialized] dsl_dataset.c:1290:12: error: 'atp' may be used uninitialized in this function [-Werror=maybe-uninitialized] [GCC 4.9.2 -Ofast] u8_textprep.c:1310:9: error: 'tc[3ul]' may be used uninitialized in this function [-Werror=maybe-uninitialized] u8_textprep.c:177:23: error: 'u8t[0ul]' may be used uninitialized in this function [-Werror=maybe-uninitialized] dsl_dataset.c:2089:37: error: ‘hds’ may be used uninitialized in this function [-Werror=maybe-uninitialized] dsl_dataset.c:3216:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized] dsl_dataset.c:1591:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized] dsl_dataset.c:3341:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized] vdev_raidz.c:1153:8: error: 'dcount[2]' may be used uninitialized in this function [-Werror=maybe-uninitialized] vdev_raidz.c:1167:17: error: 'dst[2]' may be used uninitialized in this function [-Werror=maybe-uninitialized] kernel.c:1005:2: error: ‘resid’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:2826:8: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:3056:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:1584:13: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:3056:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:1792:66: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] libzfs_dataset.c:3986:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized] [GCC 6.1.1] Resolved in PR #4907 Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4937
2016-07-26 22:08:51 +03:00
uint64_t val = 0;
2008-11-20 23:01:55 +03:00
(void) get_numeric_property(zhp, prop, NULL, &source, &val);
return (val);
}
static int
2008-11-20 23:01:55 +03:00
zfs_prop_set_int(zfs_handle_t *zhp, zfs_prop_t prop, uint64_t val)
{
char buf[64];
2009-07-03 02:44:48 +04:00
(void) snprintf(buf, sizeof (buf), "%llu", (longlong_t)val);
2008-11-20 23:01:55 +03:00
return (zfs_prop_set(zhp, zfs_prop_to_name(prop), buf));
}
/*
* Similar to zfs_prop_get(), but returns the value as an integer.
*/
int
zfs_prop_get_numeric(zfs_handle_t *zhp, zfs_prop_t prop, uint64_t *value,
zprop_source_t *src, char *statbuf, size_t statlen)
{
char *source;
/*
* Check to see if this property applies to our object
*/
if (!zfs_prop_valid_for_type(prop, zhp->zfs_type, B_FALSE)) {
2008-11-20 23:01:55 +03:00
return (zfs_error_fmt(zhp->zfs_hdl, EZFS_PROPTYPE,
dgettext(TEXT_DOMAIN, "cannot get property '%s'"),
zfs_prop_to_name(prop)));
}
if (src)
*src = ZPROP_SRC_NONE;
if (get_numeric_property(zhp, prop, src, &source, value) != 0)
return (-1);
get_source(zhp, src, source, statbuf, statlen);
return (0);
}
#ifdef HAVE_IDMAP
2009-07-03 02:44:48 +04:00
static int
idmap_id_to_numeric_domain_rid(uid_t id, boolean_t isuser,
char **domainp, idmap_rid_t *ridp)
{
idmap_get_handle_t *get_hdl = NULL;
idmap_stat status;
int err = EINVAL;
if (idmap_get_create(&get_hdl) != IDMAP_SUCCESS)
2009-07-03 02:44:48 +04:00
goto out;
if (isuser) {
err = idmap_get_sidbyuid(get_hdl, id,
IDMAP_REQ_FLG_USE_CACHE, domainp, ridp, &status);
} else {
err = idmap_get_sidbygid(get_hdl, id,
IDMAP_REQ_FLG_USE_CACHE, domainp, ridp, &status);
}
if (err == IDMAP_SUCCESS &&
idmap_get_mappings(get_hdl) == IDMAP_SUCCESS &&
status == IDMAP_SUCCESS)
err = 0;
else
err = EINVAL;
out:
if (get_hdl)
idmap_get_destroy(get_hdl);
return (err);
}
#endif /* HAVE_IDMAP */
2009-07-03 02:44:48 +04:00
/*
* convert the propname into parameters needed by kernel
* Eg: userquota@ahrens -> ZFS_PROP_USERQUOTA, "", 126829
* Eg: userused@matt@domain -> ZFS_PROP_USERUSED, "S-1-123-456", 789
* Eg: groupquota@staff -> ZFS_PROP_GROUPQUOTA, "", 1234
* Eg: groupused@staff -> ZFS_PROP_GROUPUSED, "", 1234
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
* Eg: projectquota@123 -> ZFS_PROP_PROJECTQUOTA, "", 123
* Eg: projectused@789 -> ZFS_PROP_PROJECTUSED, "", 789
2009-07-03 02:44:48 +04:00
*/
static int
userquota_propname_decode(const char *propname, boolean_t zoned,
zfs_userquota_prop_t *typep, char *domain, int domainlen, uint64_t *ridp)
{
zfs_userquota_prop_t type;
char *cp;
2009-07-03 02:44:48 +04:00
boolean_t isuser;
boolean_t isgroup;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
boolean_t isproject;
struct passwd *pw;
struct group *gr;
2009-07-03 02:44:48 +04:00
domain[0] = '\0';
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
/* Figure out the property type ({user|group|project}{quota|space}) */
2009-07-03 02:44:48 +04:00
for (type = 0; type < ZFS_NUM_USERQUOTA_PROPS; type++) {
if (strncmp(propname, zfs_userquota_prop_prefixes[type],
strlen(zfs_userquota_prop_prefixes[type])) == 0)
break;
}
if (type == ZFS_NUM_USERQUOTA_PROPS)
return (EINVAL);
*typep = type;
isuser = (type == ZFS_PROP_USERQUOTA || type == ZFS_PROP_USERUSED ||
type == ZFS_PROP_USEROBJQUOTA ||
type == ZFS_PROP_USEROBJUSED);
isgroup = (type == ZFS_PROP_GROUPQUOTA || type == ZFS_PROP_GROUPUSED ||
type == ZFS_PROP_GROUPOBJQUOTA ||
type == ZFS_PROP_GROUPOBJUSED);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
isproject = (type == ZFS_PROP_PROJECTQUOTA ||
type == ZFS_PROP_PROJECTUSED || type == ZFS_PROP_PROJECTOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED);
2009-07-03 02:44:48 +04:00
cp = strchr(propname, '@') + 1;
if (isuser && (pw = getpwnam(cp)) != NULL) {
if (zoned && getzoneid() == GLOBAL_ZONEID)
return (ENOENT);
*ridp = pw->pw_uid;
} else if (isgroup && (gr = getgrnam(cp)) != NULL) {
if (zoned && getzoneid() == GLOBAL_ZONEID)
return (ENOENT);
*ridp = gr->gr_gid;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else if (!isproject && strchr(cp, '@')) {
#ifdef HAVE_IDMAP
2009-07-03 02:44:48 +04:00
/*
* It's a SID name (eg "user@domain") that needs to be
2009-08-18 22:43:27 +04:00
* turned into S-1-domainID-RID.
2009-07-03 02:44:48 +04:00
*/
2009-08-18 22:43:27 +04:00
directory_error_t e;
char *numericsid = NULL;
char *end;
2009-07-03 02:44:48 +04:00
if (zoned && getzoneid() == GLOBAL_ZONEID)
return (ENOENT);
2009-08-18 22:43:27 +04:00
if (isuser) {
e = directory_sid_from_user_name(NULL,
cp, &numericsid);
} else {
e = directory_sid_from_group_name(NULL,
cp, &numericsid);
}
if (e != NULL) {
directory_error_free(e);
2009-07-03 02:44:48 +04:00
return (ENOENT);
2009-08-18 22:43:27 +04:00
}
if (numericsid == NULL)
2009-07-03 02:44:48 +04:00
return (ENOENT);
2009-08-18 22:43:27 +04:00
cp = numericsid;
(void) strlcpy(domain, cp, domainlen);
2009-07-03 02:44:48 +04:00
cp = strrchr(domain, '-');
*cp = '\0';
cp++;
errno = 0;
*ridp = strtoull(cp, &end, 10);
free(numericsid);
2009-07-03 02:44:48 +04:00
if (errno != 0 || *end != '\0')
return (EINVAL);
#else
(void) domainlen;
return (ENOSYS);
#endif /* HAVE_IDMAP */
2009-07-03 02:44:48 +04:00
} else {
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
/* It's a user/group/project ID (eg "12345"). */
uid_t id;
char *end;
id = strtoul(cp, &end, 10);
2009-07-03 02:44:48 +04:00
if (*end != '\0')
return (EINVAL);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (id > MAXUID && !isproject) {
#ifdef HAVE_IDMAP
2009-07-03 02:44:48 +04:00
/* It's an ephemeral ID. */
idmap_rid_t rid;
char *mapdomain;
2009-07-03 02:44:48 +04:00
if (idmap_id_to_numeric_domain_rid(id, isuser,
&mapdomain, &rid) != 0)
return (ENOENT);
2009-08-18 22:43:27 +04:00
(void) strlcpy(domain, mapdomain, domainlen);
2009-07-03 02:44:48 +04:00
*ridp = rid;
#else
return (ENOSYS);
#endif /* HAVE_IDMAP */
2009-07-03 02:44:48 +04:00
} else {
*ridp = id;
}
}
return (0);
}
static int
zfs_prop_get_userquota_common(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue, zfs_userquota_prop_t *typep)
{
int err;
zfs_cmd_t zc = {"\0"};
2009-07-03 02:44:48 +04:00
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
2009-07-03 02:44:48 +04:00
err = userquota_propname_decode(propname,
zfs_prop_get_int(zhp, ZFS_PROP_ZONED),
typep, zc.zc_value, sizeof (zc.zc_value), &zc.zc_guid);
zc.zc_objset_type = *typep;
if (err)
return (err);
err = zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_USERSPACE_ONE, &zc);
2009-07-03 02:44:48 +04:00
if (err)
return (err);
*propvalue = zc.zc_cookie;
return (0);
}
int
zfs_prop_get_userquota_int(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue)
{
zfs_userquota_prop_t type;
return (zfs_prop_get_userquota_common(zhp, propname, propvalue,
&type));
}
int
zfs_prop_get_userquota(zfs_handle_t *zhp, const char *propname,
char *propbuf, int proplen, boolean_t literal)
{
int err;
uint64_t propvalue;
zfs_userquota_prop_t type;
err = zfs_prop_get_userquota_common(zhp, propname, &propvalue,
&type);
if (err)
return (err);
if (literal) {
(void) snprintf(propbuf, proplen, "%llu",
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
(u_longlong_t)propvalue);
2009-07-03 02:44:48 +04:00
} else if (propvalue == 0 &&
(type == ZFS_PROP_USERQUOTA || type == ZFS_PROP_GROUPQUOTA ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
type == ZFS_PROP_USEROBJQUOTA || type == ZFS_PROP_GROUPOBJQUOTA ||
type == ZFS_PROP_PROJECTQUOTA ||
type == ZFS_PROP_PROJECTOBJQUOTA)) {
2009-07-03 02:44:48 +04:00
(void) strlcpy(propbuf, "none", proplen);
} else if (type == ZFS_PROP_USERQUOTA || type == ZFS_PROP_GROUPQUOTA ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
type == ZFS_PROP_USERUSED || type == ZFS_PROP_GROUPUSED ||
type == ZFS_PROP_PROJECTUSED || type == ZFS_PROP_PROJECTQUOTA) {
zfs_nicebytes(propvalue, propbuf, proplen);
2009-07-03 02:44:48 +04:00
} else {
zfs_nicenum(propvalue, propbuf, proplen);
}
return (0);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* propname must start with "written@" or "written#".
*/
int
zfs_prop_get_written_int(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue)
2008-11-20 23:01:55 +03:00
{
int err;
zfs_cmd_t zc = {"\0"};
const char *snapname;
2008-11-20 23:01:55 +03:00
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
2008-11-20 23:01:55 +03:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
assert(zfs_prop_written(propname));
snapname = propname + strlen("written@");
if (strchr(snapname, '@') != NULL || strchr(snapname, '#') != NULL) {
/* full snapshot or bookmark name specified */
(void) strlcpy(zc.zc_value, snapname, sizeof (zc.zc_value));
} else {
/* snapname is the short name, append it to zhp's fsname */
char *cp;
(void) strlcpy(zc.zc_value, zhp->zfs_name,
sizeof (zc.zc_value));
cp = strchr(zc.zc_value, '@');
if (cp != NULL)
*cp = '\0';
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) strlcat(zc.zc_value, snapname - 1, sizeof (zc.zc_value));
}
2009-01-16 00:59:39 +03:00
err = zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_SPACE_WRITTEN, &zc);
if (err)
return (err);
2009-01-16 00:59:39 +03:00
*propvalue = zc.zc_cookie;
return (0);
2009-01-16 00:59:39 +03:00
}
2008-11-20 23:01:55 +03:00
int
zfs_prop_get_written(zfs_handle_t *zhp, const char *propname,
char *propbuf, int proplen, boolean_t literal)
2008-11-20 23:01:55 +03:00
{
int err;
uint64_t propvalue;
2008-11-20 23:01:55 +03:00
err = zfs_prop_get_written_int(zhp, propname, &propvalue);
2009-01-16 00:59:39 +03:00
if (err)
return (err);
2008-11-20 23:01:55 +03:00
if (literal) {
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
(void) snprintf(propbuf, proplen, "%llu",
(u_longlong_t)propvalue);
} else {
zfs_nicebytes(propvalue, propbuf, proplen);
2008-11-20 23:01:55 +03:00
}
return (0);
2008-11-20 23:01:55 +03:00
}
/*
* Returns the name of the given zfs handle.
2008-11-20 23:01:55 +03:00
*/
const char *
zfs_get_name(const zfs_handle_t *zhp)
2008-11-20 23:01:55 +03:00
{
return (zhp->zfs_name);
}
2008-11-20 23:01:55 +03:00
/*
* Returns the name of the parent pool for the given zfs handle.
*/
const char *
zfs_get_pool_name(const zfs_handle_t *zhp)
{
return (zhp->zpool_hdl->zpool_name);
}
/*
* Returns the type of the given zfs handle.
*/
zfs_type_t
zfs_get_type(const zfs_handle_t *zhp)
{
return (zhp->zfs_type);
2008-11-20 23:01:55 +03:00
}
/*
* Returns the type of the given zfs handle,
* or, if a snapshot, the type of the snapshotted dataset.
*/
zfs_type_t
zfs_get_underlying_type(const zfs_handle_t *zhp)
{
return (zhp->zfs_head_type);
}
/*
* Is one dataset name a child dataset of another?
*
* Needs to handle these cases:
* Dataset 1 "a/foo" "a/foo" "a/foo" "a/foo"
* Dataset 2 "a/fo" "a/foobar" "a/bar/baz" "a/foo/bar"
* Descendant? No. No. No. Yes.
*/
static boolean_t
is_descendant(const char *ds1, const char *ds2)
{
size_t d1len = strlen(ds1);
/* ds2 can't be a descendant if it's smaller */
if (strlen(ds2) < d1len)
return (B_FALSE);
/* otherwise, compare strings and verify that there's a '/' char */
return (ds2[d1len] == '/' && (strncmp(ds1, ds2, d1len) == 0));
}
2008-11-20 23:01:55 +03:00
/*
* Given a complete name, return just the portion that refers to the parent.
* Will return -1 if there is no parent (path is just the name of the
* pool).
2008-11-20 23:01:55 +03:00
*/
static int
parent_name(const char *path, char *buf, size_t buflen)
{
char *slashp;
2008-11-20 23:01:55 +03:00
(void) strlcpy(buf, path, buflen);
2008-11-20 23:01:55 +03:00
if ((slashp = strrchr(buf, '/')) == NULL)
return (-1);
*slashp = '\0';
2008-11-20 23:01:55 +03:00
return (0);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
int
zfs_parent_name(zfs_handle_t *zhp, char *buf, size_t buflen)
{
return (parent_name(zfs_get_name(zhp), buf, buflen));
}
2008-11-20 23:01:55 +03:00
/*
* If accept_ancestor is false, then check to make sure that the given path has
* a parent, and that it exists. If accept_ancestor is true, then find the
* closest existing ancestor for the given path. In prefixlen return the
* length of already existing prefix of the given path. We also fetch the
* 'zoned' property, which is used to validate property settings when creating
* new datasets.
*/
static int
check_parents(libzfs_handle_t *hdl, const char *path, uint64_t *zoned,
boolean_t accept_ancestor, int *prefixlen)
{
zfs_cmd_t zc = {"\0"};
char parent[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
char *slash;
zfs_handle_t *zhp;
char errbuf[1024];
uint64_t is_zoned;
2008-11-20 23:01:55 +03:00
2009-01-16 00:59:39 +03:00
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot create '%s'"), path);
2008-11-20 23:01:55 +03:00
/* get parent, and check to see if this is just a pool */
if (parent_name(path, parent, sizeof (parent)) != 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"missing dataset name"));
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
}
/* check to see if the pool exists */
if ((slash = strchr(parent, '/')) == NULL)
slash = parent + strlen(parent);
(void) strncpy(zc.zc_name, parent, slash - parent);
zc.zc_name[slash - parent] = '\0';
if (zfs_ioctl(hdl, ZFS_IOC_OBJSET_STATS, &zc) != 0 &&
2008-11-20 23:01:55 +03:00
errno == ENOENT) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"no such pool '%s'"), zc.zc_name);
return (zfs_error(hdl, EZFS_NOENT, errbuf));
}
/* check to see if the parent dataset exists */
while ((zhp = make_dataset_handle(hdl, parent)) == NULL) {
if (errno == ENOENT && accept_ancestor) {
/*
* Go deeper to find an ancestor, give up on top level.
*/
if (parent_name(parent, parent, sizeof (parent)) != 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"no such pool '%s'"), zc.zc_name);
return (zfs_error(hdl, EZFS_NOENT, errbuf));
}
} else if (errno == ENOENT) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"parent does not exist"));
return (zfs_error(hdl, EZFS_NOENT, errbuf));
} else
return (zfs_standard_error(hdl, errno, errbuf));
}
is_zoned = zfs_prop_get_int(zhp, ZFS_PROP_ZONED);
if (zoned != NULL)
*zoned = is_zoned;
2008-11-20 23:01:55 +03:00
/* we are in a non-global zone, but parent is in the global zone */
if (getzoneid() != GLOBAL_ZONEID && !is_zoned) {
2008-11-20 23:01:55 +03:00
(void) zfs_standard_error(hdl, EPERM, errbuf);
zfs_close(zhp);
return (-1);
}
/* make sure parent is a filesystem */
if (zfs_get_type(zhp) != ZFS_TYPE_FILESYSTEM) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"parent is not a filesystem"));
(void) zfs_error(hdl, EZFS_BADTYPE, errbuf);
zfs_close(zhp);
return (-1);
}
zfs_close(zhp);
if (prefixlen != NULL)
*prefixlen = strlen(parent);
return (0);
}
/*
* Finds whether the dataset of the given type(s) exists.
*/
boolean_t
zfs_dataset_exists(libzfs_handle_t *hdl, const char *path, zfs_type_t types)
{
zfs_handle_t *zhp;
if (!zfs_validate_name(hdl, path, types, B_FALSE))
return (B_FALSE);
/*
* Try to get stats for the dataset, which will tell us if it exists.
*/
if ((zhp = make_dataset_handle(hdl, path)) != NULL) {
int ds_type = zhp->zfs_type;
zfs_close(zhp);
if (types & ds_type)
return (B_TRUE);
}
return (B_FALSE);
}
/*
* Given a path to 'target', create all the ancestors between
* the prefixlen portion of the path, and the target itself.
* Fail if the initial prefixlen-ancestor does not already exist.
*/
int
create_parents(libzfs_handle_t *hdl, char *target, int prefixlen)
{
zfs_handle_t *h;
char *cp;
const char *opname;
/* make sure prefix exists */
cp = target + prefixlen;
if (*cp != '/') {
assert(strchr(cp, '/') == NULL);
h = zfs_open(hdl, target, ZFS_TYPE_FILESYSTEM);
} else {
*cp = '\0';
h = zfs_open(hdl, target, ZFS_TYPE_FILESYSTEM);
*cp = '/';
}
if (h == NULL)
return (-1);
zfs_close(h);
/*
* Attempt to create, mount, and share any ancestor filesystems,
* up to the prefixlen-long one.
*/
for (cp = target + prefixlen + 1;
(cp = strchr(cp, '/')) != NULL; *cp = '/', cp++) {
2008-11-20 23:01:55 +03:00
*cp = '\0';
h = make_dataset_handle(hdl, target);
if (h) {
/* it already exists, nothing to do here */
zfs_close(h);
continue;
}
if (zfs_create(hdl, target, ZFS_TYPE_FILESYSTEM,
NULL) != 0) {
opname = dgettext(TEXT_DOMAIN, "create");
goto ancestorerr;
}
h = zfs_open(hdl, target, ZFS_TYPE_FILESYSTEM);
if (h == NULL) {
opname = dgettext(TEXT_DOMAIN, "open");
goto ancestorerr;
}
if (zfs_mount(h, NULL, 0) != 0) {
opname = dgettext(TEXT_DOMAIN, "mount");
goto ancestorerr;
}
if (zfs_share(h, NULL) != 0) {
2008-11-20 23:01:55 +03:00
opname = dgettext(TEXT_DOMAIN, "share");
goto ancestorerr;
}
zfs_close(h);
}
zfs_commit_shares(NULL);
2008-11-20 23:01:55 +03:00
return (0);
ancestorerr:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"failed to %s ancestor '%s'"), opname, target);
return (-1);
}
/*
* Creates non-existing ancestors of the given path.
*/
int
zfs_create_ancestors(libzfs_handle_t *hdl, const char *path)
{
int prefix;
char *path_copy;
OpenZFS 9330 - stack overflow when creating a deeply nested dataset Datasets that are deeply nested (~100 levels) are impractical. We just put a limit of 50 levels to newly created datasets. Existing datasets should work without a problem. The problem can be seen by attempting to create a dataset using the -p option with many levels: panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff fffffffffbc3aa60 unix:die+100 () fffffffffbc3ab70 unix:trap+157d () ffffff00083d7020 unix:_patch_xrstorq_rbx+196 () ffffff00083d7050 zfs:dbuf_rele+2e () ... ffffff00083d7080 zfs:dsl_dir_close+32 () ffffff00083d70b0 zfs:dsl_dir_evict+30 () ffffff00083d70d0 zfs:dbuf_evict_user+4a () ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 () ffffff00083d7130 zfs:dbuf_rele+2e () ... The block above repeats once per directory in the ... ... create -p command, working towards the root ... ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 () ffffff00083dba20 zfs:dsl_dataset_rele+42 () ffffff00083dba70 zfs:dmu_objset_prefetch+e4 () ffffff00083dbaa0 zfs:findfunc+23 () ffffff00083dbb80 zfs:dmu_objset_find_spa+38c () ffffff00083dbbc0 zfs:dmu_objset_find+40 () ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b () ffffff00083dbcc0 zfs:zfsdev_ioctl+347 () ffffff00083dbd00 genunix:cdev_ioctl+45 () ffffff00083dbd40 specfs:spec_ioctl+5a () ffffff00083dbdc0 genunix:fop_ioctl+7b () ffffff00083dbec0 genunix:ioctl+18e () ffffff00083dbf10 unix:brand_sys_sysenter+1c9 () Porting notes: * Added zfs_max_dataset_nesting module option with documentation. * Updated zfs_rename_014_neg.ksh for Linux. * Increase the zfs.sh stack warning to 15K. Enough time has passed that 16K can be reasonably assumed to be the default value. It was increased in the 3.15 kernel released in June of 2014. Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> OpenZFS-issue: https://www.illumos.org/issues/9330 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a Closes #7681
2016-09-12 18:15:20 +03:00
char errbuf[1024];
int rc = 0;
2008-11-20 23:01:55 +03:00
OpenZFS 9330 - stack overflow when creating a deeply nested dataset Datasets that are deeply nested (~100 levels) are impractical. We just put a limit of 50 levels to newly created datasets. Existing datasets should work without a problem. The problem can be seen by attempting to create a dataset using the -p option with many levels: panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff fffffffffbc3aa60 unix:die+100 () fffffffffbc3ab70 unix:trap+157d () ffffff00083d7020 unix:_patch_xrstorq_rbx+196 () ffffff00083d7050 zfs:dbuf_rele+2e () ... ffffff00083d7080 zfs:dsl_dir_close+32 () ffffff00083d70b0 zfs:dsl_dir_evict+30 () ffffff00083d70d0 zfs:dbuf_evict_user+4a () ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 () ffffff00083d7130 zfs:dbuf_rele+2e () ... The block above repeats once per directory in the ... ... create -p command, working towards the root ... ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 () ffffff00083dba20 zfs:dsl_dataset_rele+42 () ffffff00083dba70 zfs:dmu_objset_prefetch+e4 () ffffff00083dbaa0 zfs:findfunc+23 () ffffff00083dbb80 zfs:dmu_objset_find_spa+38c () ffffff00083dbbc0 zfs:dmu_objset_find+40 () ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b () ffffff00083dbcc0 zfs:zfsdev_ioctl+347 () ffffff00083dbd00 genunix:cdev_ioctl+45 () ffffff00083dbd40 specfs:spec_ioctl+5a () ffffff00083dbdc0 genunix:fop_ioctl+7b () ffffff00083dbec0 genunix:ioctl+18e () ffffff00083dbf10 unix:brand_sys_sysenter+1c9 () Porting notes: * Added zfs_max_dataset_nesting module option with documentation. * Updated zfs_rename_014_neg.ksh for Linux. * Increase the zfs.sh stack warning to 15K. Enough time has passed that 16K can be reasonably assumed to be the default value. It was increased in the 3.15 kernel released in June of 2014. Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> OpenZFS-issue: https://www.illumos.org/issues/9330 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a Closes #7681
2016-09-12 18:15:20 +03:00
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot create '%s'"), path);
/*
* Check that we are not passing the nesting limit
* before we start creating any ancestors.
*/
if (dataset_nestcheck(path) != 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"maximum name nesting depth exceeded"));
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
}
if (check_parents(hdl, path, NULL, B_TRUE, &prefix) != 0)
2008-11-20 23:01:55 +03:00
return (-1);
if ((path_copy = strdup(path)) != NULL) {
rc = create_parents(hdl, path_copy, prefix);
free(path_copy);
}
if (path_copy == NULL || rc != 0)
return (-1);
return (0);
}
/*
* Create a new filesystem or volume.
*/
int
zfs_create(libzfs_handle_t *hdl, const char *path, zfs_type_t type,
nvlist_t *props)
{
int ret;
uint64_t size = 0;
uint64_t blocksize = zfs_prop_default_numeric(ZFS_PROP_VOLBLOCKSIZE);
uint64_t zoned;
enum lzc_dataset_type ost;
zpool_handle_t *zpool_handle;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
uint8_t *wkeydata = NULL;
uint_t wkeylen = 0;
char errbuf[1024];
char parent[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot create '%s'"), path);
/* validate the path, taking care to note the extended error message */
if (!zfs_validate_name(hdl, path, type, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
OpenZFS 9330 - stack overflow when creating a deeply nested dataset Datasets that are deeply nested (~100 levels) are impractical. We just put a limit of 50 levels to newly created datasets. Existing datasets should work without a problem. The problem can be seen by attempting to create a dataset using the -p option with many levels: panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff fffffffffbc3aa60 unix:die+100 () fffffffffbc3ab70 unix:trap+157d () ffffff00083d7020 unix:_patch_xrstorq_rbx+196 () ffffff00083d7050 zfs:dbuf_rele+2e () ... ffffff00083d7080 zfs:dsl_dir_close+32 () ffffff00083d70b0 zfs:dsl_dir_evict+30 () ffffff00083d70d0 zfs:dbuf_evict_user+4a () ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 () ffffff00083d7130 zfs:dbuf_rele+2e () ... The block above repeats once per directory in the ... ... create -p command, working towards the root ... ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 () ffffff00083dba20 zfs:dsl_dataset_rele+42 () ffffff00083dba70 zfs:dmu_objset_prefetch+e4 () ffffff00083dbaa0 zfs:findfunc+23 () ffffff00083dbb80 zfs:dmu_objset_find_spa+38c () ffffff00083dbbc0 zfs:dmu_objset_find+40 () ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b () ffffff00083dbcc0 zfs:zfsdev_ioctl+347 () ffffff00083dbd00 genunix:cdev_ioctl+45 () ffffff00083dbd40 specfs:spec_ioctl+5a () ffffff00083dbdc0 genunix:fop_ioctl+7b () ffffff00083dbec0 genunix:ioctl+18e () ffffff00083dbf10 unix:brand_sys_sysenter+1c9 () Porting notes: * Added zfs_max_dataset_nesting module option with documentation. * Updated zfs_rename_014_neg.ksh for Linux. * Increase the zfs.sh stack warning to 15K. Enough time has passed that 16K can be reasonably assumed to be the default value. It was increased in the 3.15 kernel released in June of 2014. Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> OpenZFS-issue: https://www.illumos.org/issues/9330 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a Closes #7681
2016-09-12 18:15:20 +03:00
if (dataset_nestcheck(path) != 0) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"maximum name nesting depth exceeded"));
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
}
2008-11-20 23:01:55 +03:00
/* validate parents exist */
if (check_parents(hdl, path, &zoned, B_FALSE, NULL) != 0)
return (-1);
/*
* The failure modes when creating a dataset of a different type over
* one that already exists is a little strange. In particular, if you
* try to create a dataset on top of an existing dataset, the ioctl()
* will return ENOENT, not EEXIST. To prevent this from happening, we
* first try to see if the dataset exists.
*/
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (zfs_dataset_exists(hdl, path, ZFS_TYPE_DATASET)) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"dataset already exists"));
return (zfs_error(hdl, EZFS_EXISTS, errbuf));
}
if (type == ZFS_TYPE_VOLUME)
ost = LZC_DATSET_TYPE_ZVOL;
2008-11-20 23:01:55 +03:00
else
ost = LZC_DATSET_TYPE_ZFS;
2008-11-20 23:01:55 +03:00
/* open zpool handle for prop validation */
char pool_path[ZFS_MAX_DATASET_NAME_LEN];
(void) strlcpy(pool_path, path, sizeof (pool_path));
/* truncate pool_path at first slash */
char *p = strchr(pool_path, '/');
if (p != NULL)
*p = '\0';
if ((zpool_handle = zpool_open(hdl, pool_path)) == NULL)
return (-1);
if (props && (props = zfs_valid_proplist(hdl, type, props,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
zoned, NULL, zpool_handle, B_TRUE, errbuf)) == 0) {
zpool_close(zpool_handle);
2008-11-20 23:01:55 +03:00
return (-1);
}
zpool_close(zpool_handle);
2008-11-20 23:01:55 +03:00
if (type == ZFS_TYPE_VOLUME) {
/*
* If we are creating a volume, the size and block size must
* satisfy a few restraints. First, the blocksize must be a
* valid block size between SPA_{MIN,MAX}BLOCKSIZE. Second, the
* volsize must be a multiple of the block size, and cannot be
* zero.
*/
if (props == NULL || nvlist_lookup_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLSIZE), &size) != 0) {
nvlist_free(props);
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"missing volume size"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
}
if ((ret = nvlist_lookup_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
&blocksize)) != 0) {
if (ret == ENOENT) {
blocksize = zfs_prop_default_numeric(
ZFS_PROP_VOLBLOCKSIZE);
} else {
nvlist_free(props);
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"missing volume block size"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
}
}
if (size == 0) {
nvlist_free(props);
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"volume size cannot be zero"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
}
if (size % blocksize != 0) {
nvlist_free(props);
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"volume size must be a multiple of volume block "
"size"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
}
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) parent_name(path, parent, sizeof (parent));
if (zfs_crypto_create(hdl, parent, props, NULL, B_TRUE,
&wkeydata, &wkeylen) != 0) {
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
nvlist_free(props);
return (zfs_error(hdl, EZFS_CRYPTOFAILED, errbuf));
}
2008-11-20 23:01:55 +03:00
/* create the dataset */
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
ret = lzc_create(path, ost, props, wkeydata, wkeylen);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
nvlist_free(props);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (wkeydata != NULL)
free(wkeydata);
2008-11-20 23:01:55 +03:00
/* check for failure */
if (ret != 0) {
switch (errno) {
case ENOENT:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"no such parent '%s'"), parent);
return (zfs_error(hdl, EZFS_NOENT, errbuf));
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded to set this "
"property or value"));
return (zfs_error(hdl, EZFS_BADVERSION, errbuf));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case EACCES:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"encryption root's key is not loaded "
"or provided"));
return (zfs_error(hdl, EZFS_CRYPTOFAILED, errbuf));
case ERANGE:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"invalid property value(s) specified"));
return (zfs_error(hdl, EZFS_BADPROP, errbuf));
2008-11-20 23:01:55 +03:00
#ifdef _ILP32
case EOVERFLOW:
/*
* This platform can't address a volume this big.
*/
if (type == ZFS_TYPE_VOLUME)
return (zfs_error(hdl, EZFS_VOLTOOBIG,
errbuf));
zfs_fallthrough;
2008-11-20 23:01:55 +03:00
#endif
default:
return (zfs_standard_error(hdl, errno, errbuf));
}
}
return (0);
}
/*
* Destroys the given dataset. The caller must make sure that the filesystem
* isn't mounted, and that there are no active dependents. If the file system
* does not exist this function does nothing.
2008-11-20 23:01:55 +03:00
*/
int
2009-08-18 22:43:27 +04:00
zfs_destroy(zfs_handle_t *zhp, boolean_t defer)
2008-11-20 23:01:55 +03:00
{
int error;
if (zhp->zfs_type != ZFS_TYPE_SNAPSHOT && defer)
return (EINVAL);
2008-11-20 23:01:55 +03:00
if (zhp->zfs_type == ZFS_TYPE_BOOKMARK) {
nvlist_t *nv = fnvlist_alloc();
fnvlist_add_boolean(nv, zhp->zfs_name);
error = lzc_destroy_bookmarks(nv, NULL);
fnvlist_free(nv);
if (error != 0) {
return (zfs_standard_error_fmt(zhp->zfs_hdl, error,
dgettext(TEXT_DOMAIN, "cannot destroy '%s'"),
zhp->zfs_name));
}
return (0);
}
if (zhp->zfs_type == ZFS_TYPE_SNAPSHOT) {
nvlist_t *nv = fnvlist_alloc();
fnvlist_add_boolean(nv, zhp->zfs_name);
error = lzc_destroy_snaps(nv, defer, NULL);
fnvlist_free(nv);
2008-11-20 23:01:55 +03:00
} else {
error = lzc_destroy(zhp->zfs_name);
2008-11-20 23:01:55 +03:00
}
if (error != 0 && error != ENOENT) {
2008-11-20 23:01:55 +03:00
return (zfs_standard_error_fmt(zhp->zfs_hdl, errno,
dgettext(TEXT_DOMAIN, "cannot destroy '%s'"),
zhp->zfs_name));
}
remove_mountpoint(zhp);
return (0);
}
struct destroydata {
nvlist_t *nvl;
const char *snapname;
2008-11-20 23:01:55 +03:00
};
static int
zfs_check_snap_cb(zfs_handle_t *zhp, void *arg)
2008-11-20 23:01:55 +03:00
{
struct destroydata *dd = arg;
char name[ZFS_MAX_DATASET_NAME_LEN];
int rv = 0;
2008-11-20 23:01:55 +03:00
if (snprintf(name, sizeof (name), "%s@%s", zhp->zfs_name,
dd->snapname) >= sizeof (name))
return (EINVAL);
2008-11-20 23:01:55 +03:00
if (lzc_exists(name))
fnvlist_add_boolean(dd->nvl, name);
2008-11-20 23:01:55 +03:00
rv = zfs_iter_filesystems(zhp, zfs_check_snap_cb, dd);
zfs_close(zhp);
2008-11-20 23:01:55 +03:00
return (rv);
}
/*
* Destroys all snapshots with the given name in zhp & descendants.
*/
int
2009-08-18 22:43:27 +04:00
zfs_destroy_snaps(zfs_handle_t *zhp, char *snapname, boolean_t defer)
2008-11-20 23:01:55 +03:00
{
int ret;
struct destroydata dd = { 0 };
dd.snapname = snapname;
dd.nvl = fnvlist_alloc();
(void) zfs_check_snap_cb(zfs_handle_dup(zhp), &dd);
2008-11-20 23:01:55 +03:00
if (nvlist_empty(dd.nvl)) {
ret = zfs_standard_error_fmt(zhp->zfs_hdl, ENOENT,
2008-11-20 23:01:55 +03:00
dgettext(TEXT_DOMAIN, "cannot destroy '%s@%s'"),
zhp->zfs_name, snapname);
} else {
ret = zfs_destroy_snaps_nvl(zhp->zfs_hdl, dd.nvl, defer);
2008-11-20 23:01:55 +03:00
}
fnvlist_free(dd.nvl);
return (ret);
}
/*
* Destroys all the snapshots named in the nvlist.
*/
int
zfs_destroy_snaps_nvl(libzfs_handle_t *hdl, nvlist_t *snaps, boolean_t defer)
{
nvlist_t *errlist = NULL;
nvpair_t *pair;
2008-11-20 23:01:55 +03:00
int ret = zfs_destroy_snaps_nvl_os(hdl, snaps);
if (ret != 0)
return (ret);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ret = lzc_destroy_snaps(snaps, defer, &errlist);
2008-11-20 23:01:55 +03:00
if (ret == 0) {
nvlist_free(errlist);
return (0);
}
2008-11-20 23:01:55 +03:00
if (nvlist_empty(errlist)) {
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot destroy snapshots"));
ret = zfs_standard_error(hdl, ret, errbuf);
}
for (pair = nvlist_next_nvpair(errlist, NULL);
pair != NULL; pair = nvlist_next_nvpair(errlist, pair)) {
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot destroy snapshot %s"),
nvpair_name(pair));
switch (fnvpair_value_int32(pair)) {
case EEXIST:
zfs_error_aux(hdl,
dgettext(TEXT_DOMAIN, "snapshot is cloned"));
ret = zfs_error(hdl, EZFS_EXISTS, errbuf);
break;
default:
ret = zfs_standard_error(hdl, errno, errbuf);
break;
2008-11-20 23:01:55 +03:00
}
}
nvlist_free(errlist);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
return (ret);
2008-11-20 23:01:55 +03:00
}
/*
* Clones the given dataset. The target must be of the same type as the source.
*/
int
zfs_clone(zfs_handle_t *zhp, const char *target, nvlist_t *props)
{
char parent[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
int ret;
char errbuf[1024];
libzfs_handle_t *hdl = zhp->zfs_hdl;
uint64_t zoned;
assert(zhp->zfs_type == ZFS_TYPE_SNAPSHOT);
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot create '%s'"), target);
/* validate the target/clone name */
2008-11-20 23:01:55 +03:00
if (!zfs_validate_name(hdl, target, ZFS_TYPE_FILESYSTEM, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
/* validate parents exist */
if (check_parents(hdl, target, &zoned, B_FALSE, NULL) != 0)
return (-1);
(void) parent_name(target, parent, sizeof (parent));
/* do the clone */
if (props) {
zfs_type_t type = ZFS_TYPE_FILESYSTEM;
if (ZFS_IS_VOLUME(zhp))
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
type = ZFS_TYPE_VOLUME;
if ((props = zfs_valid_proplist(hdl, type, props, zoned,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
zhp, zhp->zpool_hdl, B_TRUE, errbuf)) == NULL)
2008-11-20 23:01:55 +03:00
return (-1);
if (zfs_fix_auto_resv(zhp, props) == -1) {
nvlist_free(props);
return (-1);
}
2008-11-20 23:01:55 +03:00
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (zfs_crypto_clone_check(hdl, zhp, parent, props) != 0) {
nvlist_free(props);
return (zfs_error(hdl, EZFS_CRYPTOFAILED, errbuf));
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ret = lzc_clone(target, zhp->zfs_name, props);
nvlist_free(props);
2008-11-20 23:01:55 +03:00
if (ret != 0) {
switch (errno) {
case ENOENT:
/*
* The parent doesn't exist. We should have caught this
* above, but there may a race condition that has since
* destroyed the parent.
*
* At this point, we don't know whether it's the source
* that doesn't exist anymore, or whether the target
* dataset doesn't exist.
*/
zfs_error_aux(zhp->zfs_hdl, dgettext(TEXT_DOMAIN,
"no such parent '%s'"), parent);
return (zfs_error(zhp->zfs_hdl, EZFS_NOENT, errbuf));
case EXDEV:
zfs_error_aux(zhp->zfs_hdl, dgettext(TEXT_DOMAIN,
"source and target pools differ"));
return (zfs_error(zhp->zfs_hdl, EZFS_CROSSTARGET,
errbuf));
default:
return (zfs_standard_error(zhp->zfs_hdl, errno,
errbuf));
}
}
return (ret);
}
/*
* Promotes the given clone fs to be the clone parent.
*/
int
zfs_promote(zfs_handle_t *zhp)
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
char snapname[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
int ret;
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot promote '%s'"), zhp->zfs_name);
if (zhp->zfs_type == ZFS_TYPE_SNAPSHOT) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"snapshots can not be promoted"));
return (zfs_error(hdl, EZFS_BADTYPE, errbuf));
}
if (zhp->zfs_dmustats.dds_origin[0] == '\0') {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"not a cloned filesystem"));
return (zfs_error(hdl, EZFS_BADTYPE, errbuf));
}
if (!zfs_validate_name(hdl, zhp->zfs_name, zhp->zfs_type, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
ret = lzc_promote(zhp->zfs_name, snapname, sizeof (snapname));
2008-11-20 23:01:55 +03:00
if (ret != 0) {
switch (ret) {
case EACCES:
/*
* Promoting encrypted dataset outside its
* encryption root.
*/
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"cannot promote dataset outside its "
"encryption root"));
return (zfs_error(hdl, EZFS_EXISTS, errbuf));
2008-11-20 23:01:55 +03:00
case EEXIST:
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
/* There is a conflicting snapshot name. */
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"conflicting snapshot '%s' from parent '%s'"),
snapname, zhp->zfs_dmustats.dds_origin);
2008-11-20 23:01:55 +03:00
return (zfs_error(hdl, EZFS_EXISTS, errbuf));
default:
return (zfs_standard_error(hdl, ret, errbuf));
2008-11-20 23:01:55 +03:00
}
}
2008-11-20 23:01:55 +03:00
return (ret);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
typedef struct snapdata {
nvlist_t *sd_nvl;
const char *sd_snapname;
} snapdata_t;
static int
zfs_snapshot_cb(zfs_handle_t *zhp, void *arg)
{
snapdata_t *sd = arg;
char name[ZFS_MAX_DATASET_NAME_LEN];
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
int rv = 0;
if (zfs_prop_get_int(zhp, ZFS_PROP_INCONSISTENT) == 0) {
if (snprintf(name, sizeof (name), "%s@%s", zfs_get_name(zhp),
sd->sd_snapname) >= sizeof (name))
return (EINVAL);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
fnvlist_add_boolean(sd->sd_nvl, name);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
rv = zfs_iter_filesystems(zhp, zfs_snapshot_cb, sd);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
zfs_close(zhp);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
return (rv);
}
2008-11-20 23:01:55 +03:00
/*
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
* Creates snapshots. The keys in the snaps nvlist are the snapshots to be
* created.
2008-11-20 23:01:55 +03:00
*/
int
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
zfs_snapshot_nvl(libzfs_handle_t *hdl, nvlist_t *snaps, nvlist_t *props)
2008-11-20 23:01:55 +03:00
{
int ret;
char errbuf[1024];
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
nvpair_t *elem;
nvlist_t *errors;
zpool_handle_t *zpool_hdl;
char pool[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
"cannot create snapshots "));
2008-11-20 23:01:55 +03:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
elem = NULL;
while ((elem = nvlist_next_nvpair(snaps, elem)) != NULL) {
const char *snapname = nvpair_name(elem);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
/* validate the target name */
if (!zfs_validate_name(hdl, snapname, ZFS_TYPE_SNAPSHOT,
B_TRUE)) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot create snapshot '%s'"), snapname);
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
}
}
/*
* get pool handle for prop validation. assumes all snaps are in the
* same pool, as does lzc_snapshot (below).
*/
elem = nvlist_next_nvpair(snaps, NULL);
(void) strlcpy(pool, nvpair_name(elem), sizeof (pool));
pool[strcspn(pool, "/@")] = '\0';
zpool_hdl = zpool_open(hdl, pool);
if (zpool_hdl == NULL)
return (-1);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (props != NULL &&
(props = zfs_valid_proplist(hdl, ZFS_TYPE_SNAPSHOT,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
props, B_FALSE, NULL, zpool_hdl, B_FALSE, errbuf)) == NULL) {
zpool_close(zpool_hdl);
2008-11-20 23:01:55 +03:00
return (-1);
}
zpool_close(zpool_hdl);
2008-11-20 23:01:55 +03:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ret = lzc_snapshot(snaps, props, &errors);
2008-11-20 23:01:55 +03:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (ret != 0) {
boolean_t printed = B_FALSE;
for (elem = nvlist_next_nvpair(errors, NULL);
elem != NULL;
elem = nvlist_next_nvpair(errors, elem)) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot create snapshot '%s'"), nvpair_name(elem));
(void) zfs_standard_error(hdl,
fnvpair_value_int32(elem), errbuf);
printed = B_TRUE;
}
if (!printed) {
switch (ret) {
case EXDEV:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"multiple snapshots of same "
"fs not allowed"));
(void) zfs_error(hdl, EZFS_EXISTS, errbuf);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
break;
default:
(void) zfs_standard_error(hdl, ret, errbuf);
}
}
}
2008-11-20 23:01:55 +03:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
nvlist_free(props);
nvlist_free(errors);
return (ret);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
int
zfs_snapshot(libzfs_handle_t *hdl, const char *path, boolean_t recursive,
nvlist_t *props)
{
int ret;
snapdata_t sd = { 0 };
char fsname[ZFS_MAX_DATASET_NAME_LEN];
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
char *cp;
zfs_handle_t *zhp;
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot snapshot %s"), path);
if (!zfs_validate_name(hdl, path, ZFS_TYPE_SNAPSHOT, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
Remove ZFC_IOC_*_MINOR ioctl()s Early versions of ZFS coordinated the creation and destruction of device minors from userspace. This was inherently racy and in late 2009 these ioctl()s were removed leaving everything up to the kernel. This significantly simplified the code. However, we never picked up these changes in ZoL since we'd already significantly adjusted this code for Linux. This patch aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s and moving all the functionality down in to the kernel. Since this cleanup will change the kernel/user ABI it's being done in the same tag as the previous libzfs_core ABI changes. This will minimize, but not eliminate, the disruption to end users. Once merged ZoL, Illumos, and FreeBSD will basically be back in sync in regards to handling ZVOLs in the common code. While each platform must have its own custom zvol.c implemenation the interfaces provided are consistent. NOTES: 1) This patch introduces one subtle change in behavior which could not be easily avoided. Prior to this change callers of 'zfs create -V ...' were guaranteed that upon exit the /dev/zvol/ block device link would be created or an error returned. That's no longer the case. The utilities will no longer block waiting for the symlink to be created. Callers are now responsible for blocking, this is why a 'udev_wait' call was added to the 'label' function in scripts/common.sh. 2) The read-only behavior of a ZVOL now solely depends on if the ZVOL_RDONLY bit is set in zv->zv_flags. The redundant policy setting in the gendisk structure was removed. This both simplifies the code and allows us to safely leverage set_disk_ro() to issue a KOBJ_CHANGE uevent. See the comment in the code for futher details on this. 3) Because __zvol_create_minor() and zvol_alloc() may now be called in a sync task they must use KM_PUSHPAGE. References: illumos/illumos-gate@681d9761e8516a7dc5ab6589e2dfe717777e1123 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #1969
2013-12-07 02:20:22 +04:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
(void) strlcpy(fsname, path, sizeof (fsname));
cp = strchr(fsname, '@');
*cp = '\0';
sd.sd_snapname = cp + 1;
2008-11-20 23:01:55 +03:00
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if ((zhp = zfs_open(hdl, fsname, ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_VOLUME)) == NULL) {
return (-1);
}
sd.sd_nvl = fnvlist_alloc();
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (recursive) {
(void) zfs_snapshot_cb(zfs_handle_dup(zhp), &sd);
} else {
fnvlist_add_boolean(sd.sd_nvl, path);
}
ret = zfs_snapshot_nvl(hdl, sd.sd_nvl, props);
fnvlist_free(sd.sd_nvl);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
zfs_close(zhp);
2008-11-20 23:01:55 +03:00
return (ret);
}
/*
* Destroy any more recent snapshots. We invoke this callback on any dependents
* of the snapshot first. If the 'cb_dependent' member is non-zero, then this
* is a dependent and we should just destroy it without checking the transaction
* group.
*/
typedef struct rollback_data {
const char *cb_target; /* the snapshot */
uint64_t cb_create; /* creation time reference */
boolean_t cb_error;
boolean_t cb_force;
} rollback_data_t;
static int
rollback_destroy_dependent(zfs_handle_t *zhp, void *data)
2008-11-20 23:01:55 +03:00
{
rollback_data_t *cbp = data;
prop_changelist_t *clp;
/* We must destroy this clone; first unmount it */
clp = changelist_gather(zhp, ZFS_PROP_NAME, 0,
cbp->cb_force ? MS_FORCE: 0);
if (clp == NULL || changelist_prefix(clp) != 0) {
cbp->cb_error = B_TRUE;
zfs_close(zhp);
return (0);
}
if (zfs_destroy(zhp, B_FALSE) != 0)
cbp->cb_error = B_TRUE;
else
changelist_remove(clp, zhp->zfs_name);
(void) changelist_postfix(clp);
changelist_free(clp);
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
return (0);
}
2008-11-20 23:01:55 +03:00
static int
rollback_destroy(zfs_handle_t *zhp, void *data)
{
rollback_data_t *cbp = data;
2008-11-20 23:01:55 +03:00
if (zfs_prop_get_int(zhp, ZFS_PROP_CREATETXG) > cbp->cb_create) {
cbp->cb_error |= zfs_iter_dependents(zhp, B_FALSE,
rollback_destroy_dependent, cbp);
2008-11-20 23:01:55 +03:00
cbp->cb_error |= zfs_destroy(zhp, B_FALSE);
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
return (0);
}
/*
* Given a dataset, rollback to a specific snapshot, discarding any
* data changes since then and making it the active dataset.
*
* Any snapshots and bookmarks more recent than the target are
* destroyed, along with their dependents (i.e. clones).
2008-11-20 23:01:55 +03:00
*/
int
zfs_rollback(zfs_handle_t *zhp, zfs_handle_t *snap, boolean_t force)
{
rollback_data_t cb = { 0 };
int err;
boolean_t restore_resv = 0;
uint64_t old_volsize = 0, new_volsize;
zfs_prop_t resv_prop = { 0 };
uint64_t min_txg = 0;
2008-11-20 23:01:55 +03:00
assert(zhp->zfs_type == ZFS_TYPE_FILESYSTEM ||
zhp->zfs_type == ZFS_TYPE_VOLUME);
/*
* Destroy all recent snapshots and their dependents.
2008-11-20 23:01:55 +03:00
*/
cb.cb_force = force;
cb.cb_target = snap->zfs_name;
cb.cb_create = zfs_prop_get_int(snap, ZFS_PROP_CREATETXG);
if (cb.cb_create > 0)
min_txg = cb.cb_create;
(void) zfs_iter_snapshots(zhp, B_FALSE, rollback_destroy, &cb,
min_txg, 0);
(void) zfs_iter_bookmarks(zhp, rollback_destroy, &cb);
2008-11-20 23:01:55 +03:00
if (cb.cb_error)
return (-1);
/*
* Now that we have verified that the snapshot is the latest,
* rollback to the given snapshot.
*/
if (zhp->zfs_type == ZFS_TYPE_VOLUME) {
if (zfs_which_resv_prop(zhp, &resv_prop) < 0)
return (-1);
old_volsize = zfs_prop_get_int(zhp, ZFS_PROP_VOLSIZE);
restore_resv =
(old_volsize == zfs_prop_get_int(zhp, resv_prop));
}
/*
* Pass both the filesystem and the wanted snapshot names,
* we would get an error back if the snapshot is destroyed or
* a new snapshot is created before this request is processed.
2008-11-20 23:01:55 +03:00
*/
err = lzc_rollback_to(zhp->zfs_name, snap->zfs_name);
if (err != 0) {
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf),
2008-11-20 23:01:55 +03:00
dgettext(TEXT_DOMAIN, "cannot rollback '%s'"),
zhp->zfs_name);
switch (err) {
case EEXIST:
zfs_error_aux(zhp->zfs_hdl, dgettext(TEXT_DOMAIN,
"there is a snapshot or bookmark more recent "
"than '%s'"), snap->zfs_name);
(void) zfs_error(zhp->zfs_hdl, EZFS_EXISTS, errbuf);
break;
case ESRCH:
zfs_error_aux(zhp->zfs_hdl, dgettext(TEXT_DOMAIN,
"'%s' is not found among snapshots of '%s'"),
snap->zfs_name, zhp->zfs_name);
(void) zfs_error(zhp->zfs_hdl, EZFS_NOENT, errbuf);
break;
case EINVAL:
(void) zfs_error(zhp->zfs_hdl, EZFS_BADTYPE, errbuf);
break;
default:
(void) zfs_standard_error(zhp->zfs_hdl, err, errbuf);
}
2008-11-20 23:01:55 +03:00
return (err);
}
/*
* For volumes, if the pre-rollback volsize matched the pre-
* rollback reservation and the volsize has changed then set
* the reservation property to the post-rollback volsize.
* Make a new handle since the rollback closed the dataset.
*/
if ((zhp->zfs_type == ZFS_TYPE_VOLUME) &&
(zhp = make_dataset_handle(zhp->zfs_hdl, zhp->zfs_name))) {
if (restore_resv) {
new_volsize = zfs_prop_get_int(zhp, ZFS_PROP_VOLSIZE);
if (old_volsize != new_volsize)
err = zfs_prop_set_int(zhp, resv_prop,
new_volsize);
}
zfs_close(zhp);
}
return (err);
}
/*
* Renames the given dataset.
*/
int
zfs_rename(zfs_handle_t *zhp, const char *target, renameflags_t flags)
2008-11-20 23:01:55 +03:00
{
int ret = 0;
zfs_cmd_t zc = {"\0"};
2008-11-20 23:01:55 +03:00
char *delim;
prop_changelist_t *cl = NULL;
char parent[ZFS_MAX_DATASET_NAME_LEN];
char property[ZFS_MAXPROPLEN];
2008-11-20 23:01:55 +03:00
libzfs_handle_t *hdl = zhp->zfs_hdl;
char errbuf[1024];
/* if we have the same exact name, just return success */
if (strcmp(zhp->zfs_name, target) == 0)
return (0);
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot rename to '%s'"), target);
/* make sure source name is valid */
if (!zfs_validate_name(hdl, zhp->zfs_name, zhp->zfs_type, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
2008-11-20 23:01:55 +03:00
/*
* Make sure the target name is valid
*/
if (zhp->zfs_type == ZFS_TYPE_SNAPSHOT) {
if ((strchr(target, '@') == NULL) ||
*target == '@') {
/*
* Snapshot target name is abbreviated,
* reconstruct full dataset name
*/
(void) strlcpy(parent, zhp->zfs_name,
sizeof (parent));
delim = strchr(parent, '@');
if (strchr(target, '@') == NULL)
*(++delim) = '\0';
else
*delim = '\0';
(void) strlcat(parent, target, sizeof (parent));
target = parent;
} else {
/*
* Make sure we're renaming within the same dataset.
*/
delim = strchr(target, '@');
if (strncmp(zhp->zfs_name, target, delim - target)
!= 0 || zhp->zfs_name[delim - target] != '@') {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"snapshots must be part of same "
"dataset"));
return (zfs_error(hdl, EZFS_CROSSTARGET,
errbuf));
}
}
OpenZFS 9330 - stack overflow when creating a deeply nested dataset Datasets that are deeply nested (~100 levels) are impractical. We just put a limit of 50 levels to newly created datasets. Existing datasets should work without a problem. The problem can be seen by attempting to create a dataset using the -p option with many levels: panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff fffffffffbc3aa60 unix:die+100 () fffffffffbc3ab70 unix:trap+157d () ffffff00083d7020 unix:_patch_xrstorq_rbx+196 () ffffff00083d7050 zfs:dbuf_rele+2e () ... ffffff00083d7080 zfs:dsl_dir_close+32 () ffffff00083d70b0 zfs:dsl_dir_evict+30 () ffffff00083d70d0 zfs:dbuf_evict_user+4a () ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 () ffffff00083d7130 zfs:dbuf_rele+2e () ... The block above repeats once per directory in the ... ... create -p command, working towards the root ... ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 () ffffff00083dba20 zfs:dsl_dataset_rele+42 () ffffff00083dba70 zfs:dmu_objset_prefetch+e4 () ffffff00083dbaa0 zfs:findfunc+23 () ffffff00083dbb80 zfs:dmu_objset_find_spa+38c () ffffff00083dbbc0 zfs:dmu_objset_find+40 () ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b () ffffff00083dbcc0 zfs:zfsdev_ioctl+347 () ffffff00083dbd00 genunix:cdev_ioctl+45 () ffffff00083dbd40 specfs:spec_ioctl+5a () ffffff00083dbdc0 genunix:fop_ioctl+7b () ffffff00083dbec0 genunix:ioctl+18e () ffffff00083dbf10 unix:brand_sys_sysenter+1c9 () Porting notes: * Added zfs_max_dataset_nesting module option with documentation. * Updated zfs_rename_014_neg.ksh for Linux. * Increase the zfs.sh stack warning to 15K. Enough time has passed that 16K can be reasonably assumed to be the default value. It was increased in the 3.15 kernel released in June of 2014. Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> OpenZFS-issue: https://www.illumos.org/issues/9330 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a Closes #7681
2016-09-12 18:15:20 +03:00
2008-11-20 23:01:55 +03:00
if (!zfs_validate_name(hdl, target, zhp->zfs_type, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
} else {
if (flags.recursive) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"recursive rename must be a snapshot"));
return (zfs_error(hdl, EZFS_BADTYPE, errbuf));
}
if (!zfs_validate_name(hdl, target, zhp->zfs_type, B_TRUE))
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
/* validate parents */
if (check_parents(hdl, target, NULL, B_FALSE, NULL) != 0)
2008-11-20 23:01:55 +03:00
return (-1);
/* make sure we're in the same pool */
verify((delim = strchr(target, '/')) != NULL);
if (strncmp(zhp->zfs_name, target, delim - target) != 0 ||
zhp->zfs_name[delim - target] != '/') {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"datasets must be within same pool"));
return (zfs_error(hdl, EZFS_CROSSTARGET, errbuf));
}
/* new name cannot be a child of the current dataset name */
if (is_descendant(zhp->zfs_name, target)) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"New dataset name cannot be a descendant of "
2008-11-20 23:01:55 +03:00
"current dataset name"));
return (zfs_error(hdl, EZFS_INVALIDNAME, errbuf));
}
}
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot rename '%s'"), zhp->zfs_name);
if (getzoneid() == GLOBAL_ZONEID &&
zfs_prop_get_int(zhp, ZFS_PROP_ZONED)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"dataset is used in a non-global zone"));
return (zfs_error(hdl, EZFS_ZONED, errbuf));
}
/*
* Avoid unmounting file systems with mountpoint property set to
* 'legacy' or 'none' even if -u option is not given.
*/
if (zhp->zfs_type == ZFS_TYPE_FILESYSTEM &&
!flags.recursive && !flags.nounmount &&
zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT, property,
sizeof (property), NULL, NULL, 0, B_FALSE) == 0 &&
(strcmp(property, "legacy") == 0 ||
strcmp(property, "none") == 0)) {
flags.nounmount = B_TRUE;
}
if (flags.recursive) {
char *parentname = zfs_strdup(zhp->zfs_hdl, zhp->zfs_name);
2008-11-20 23:01:55 +03:00
delim = strchr(parentname, '@');
*delim = '\0';
zfs_handle_t *zhrp = zfs_open(zhp->zfs_hdl, parentname,
ZFS_TYPE_DATASET);
free(parentname);
2008-11-20 23:01:55 +03:00
if (zhrp == NULL) {
ret = -1;
goto error;
}
zfs_close(zhrp);
} else if (zhp->zfs_type != ZFS_TYPE_SNAPSHOT) {
if ((cl = changelist_gather(zhp, ZFS_PROP_NAME,
flags.nounmount ? CL_GATHER_DONT_UNMOUNT :
CL_GATHER_ITER_MOUNTED,
flags.forceunmount ? MS_FORCE : 0)) == NULL)
2008-11-20 23:01:55 +03:00
return (-1);
if (changelist_haszonedchild(cl)) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"child dataset with inherited mountpoint is used "
"in a non-global zone"));
(void) zfs_error(hdl, EZFS_ZONED, errbuf);
ret = -1;
2008-11-20 23:01:55 +03:00
goto error;
}
if ((ret = changelist_prefix(cl)) != 0)
goto error;
}
if (ZFS_IS_VOLUME(zhp))
zc.zc_objset_type = DMU_OST_ZVOL;
else
zc.zc_objset_type = DMU_OST_ZFS;
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
(void) strlcpy(zc.zc_value, target, sizeof (zc.zc_value));
zc.zc_cookie = !!flags.recursive;
zc.zc_cookie |= (!!flags.nounmount) << 1;
2008-11-20 23:01:55 +03:00
if ((ret = zfs_ioctl(zhp->zfs_hdl, ZFS_IOC_RENAME, &zc)) != 0) {
/*
* if it was recursive, the one that actually failed will
* be in zc.zc_name
*/
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot rename '%s'"), zc.zc_name);
if (flags.recursive && errno == EEXIST) {
2008-11-20 23:01:55 +03:00
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"a child dataset already has a snapshot "
"with the new name"));
(void) zfs_error(hdl, EZFS_EXISTS, errbuf);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
} else if (errno == EACCES) {
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"cannot move encrypted child outside of "
"its encryption root"));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
(void) zfs_error(hdl, EZFS_CRYPTOFAILED, errbuf);
2008-11-20 23:01:55 +03:00
} else {
(void) zfs_standard_error(zhp->zfs_hdl, errno, errbuf);
}
/*
* On failure, we still want to remount any filesystems that
* were previously mounted, so we don't alter the system state.
*/
if (cl != NULL)
2008-11-20 23:01:55 +03:00
(void) changelist_postfix(cl);
} else {
if (cl != NULL) {
2008-11-20 23:01:55 +03:00
changelist_rename(cl, zfs_get_name(zhp), target);
ret = changelist_postfix(cl);
}
}
error:
if (cl != NULL) {
2008-11-20 23:01:55 +03:00
changelist_free(cl);
}
return (ret);
}
nvlist_t *
zfs_get_all_props(zfs_handle_t *zhp)
{
return (zhp->zfs_props);
}
nvlist_t *
zfs_get_recvd_props(zfs_handle_t *zhp)
{
if (zhp->zfs_recvd_props == NULL)
if (get_recvd_props_ioctl(zhp) != 0)
return (NULL);
return (zhp->zfs_recvd_props);
}
2008-11-20 23:01:55 +03:00
nvlist_t *
zfs_get_user_props(zfs_handle_t *zhp)
2008-11-20 23:01:55 +03:00
{
return (zhp->zfs_user_props);
2008-11-20 23:01:55 +03:00
}
/*
* This function is used by 'zfs list' to determine the exact set of columns to
* display, and their maximum widths. This does two main things:
*
* - If this is a list of all properties, then expand the list to include
* all native properties, and set a flag so that for each dataset we look
* for new unique user properties and add them to the list.
*
* - For non fixed-width properties, keep track of the maximum width seen
* so that we can size the column appropriately. If the user has
* requested received property values, we also need to compute the width
* of the RECEIVED column.
2008-11-20 23:01:55 +03:00
*/
int
zfs_expand_proplist(zfs_handle_t *zhp, zprop_list_t **plp, boolean_t received,
boolean_t literal)
2008-11-20 23:01:55 +03:00
{
libzfs_handle_t *hdl = zhp->zfs_hdl;
zprop_list_t *entry;
zprop_list_t **last, **start;
nvlist_t *userprops, *propval;
nvpair_t *elem;
char *strval;
char buf[ZFS_MAXPROPLEN];
if (zprop_expand_list(hdl, plp, ZFS_TYPE_DATASET) != 0)
return (-1);
userprops = zfs_get_user_props(zhp);
entry = *plp;
if (entry->pl_all && nvlist_next_nvpair(userprops, NULL) != NULL) {
/*
* Go through and add any user properties as necessary. We
* start by incrementing our list pointer to the first
* non-native property.
*/
start = plp;
while (*start != NULL) {
if ((*start)->pl_prop == ZPROP_INVAL)
break;
start = &(*start)->pl_next;
}
elem = NULL;
while ((elem = nvlist_next_nvpair(userprops, elem)) != NULL) {
/*
* See if we've already found this property in our list.
*/
for (last = start; *last != NULL;
last = &(*last)->pl_next) {
if (strcmp((*last)->pl_user_prop,
nvpair_name(elem)) == 0)
break;
}
if (*last == NULL) {
entry = zfs_alloc(hdl, sizeof (zprop_list_t));
entry->pl_user_prop =
zfs_strdup(hdl, nvpair_name(elem));
2008-11-20 23:01:55 +03:00
entry->pl_prop = ZPROP_INVAL;
entry->pl_width = strlen(nvpair_name(elem));
entry->pl_all = B_TRUE;
*last = entry;
}
}
}
/*
* Now go through and check the width of any non-fixed columns
*/
for (entry = *plp; entry != NULL; entry = entry->pl_next) {
if (entry->pl_fixed && !literal)
2008-11-20 23:01:55 +03:00
continue;
if (entry->pl_prop != ZPROP_INVAL) {
if (zfs_prop_get(zhp, entry->pl_prop,
buf, sizeof (buf), NULL, NULL, 0, literal) == 0) {
2008-11-20 23:01:55 +03:00
if (strlen(buf) > entry->pl_width)
entry->pl_width = strlen(buf);
}
if (received && zfs_prop_get_recvd(zhp,
zfs_prop_to_name(entry->pl_prop),
buf, sizeof (buf), literal) == 0)
if (strlen(buf) > entry->pl_recvd_width)
entry->pl_recvd_width = strlen(buf);
} else {
if (nvlist_lookup_nvlist(userprops, entry->pl_user_prop,
&propval) == 0) {
strval = fnvlist_lookup_string(propval,
ZPROP_VALUE);
if (strlen(strval) > entry->pl_width)
entry->pl_width = strlen(strval);
}
if (received && zfs_prop_get_recvd(zhp,
entry->pl_user_prop,
buf, sizeof (buf), literal) == 0)
if (strlen(buf) > entry->pl_recvd_width)
entry->pl_recvd_width = strlen(buf);
2008-11-20 23:01:55 +03:00
}
}
return (0);
}
2009-07-03 02:44:48 +04:00
void
zfs_prune_proplist(zfs_handle_t *zhp, uint8_t *props)
{
nvpair_t *curr;
nvpair_t *next;
2009-07-03 02:44:48 +04:00
/*
* Keep a reference to the props-table against which we prune the
* properties.
*/
zhp->zfs_props_table = props;
curr = nvlist_next_nvpair(zhp->zfs_props, NULL);
while (curr) {
zfs_prop_t zfs_prop = zfs_name_to_prop(nvpair_name(curr));
next = nvlist_next_nvpair(zhp->zfs_props, curr);
2009-07-03 02:44:48 +04:00
/*
* User properties will result in ZPROP_INVAL, and since we
* only know how to prune standard ZFS properties, we always
* leave these in the list. This can also happen if we
* encounter an unknown DSL property (when running older
* software, for example).
2009-07-03 02:44:48 +04:00
*/
if (zfs_prop != ZPROP_INVAL && props[zfs_prop] == B_FALSE)
(void) nvlist_remove(zhp->zfs_props,
nvpair_name(curr), nvpair_type(curr));
curr = next;
}
}
static int
zfs_smb_acl_mgmt(libzfs_handle_t *hdl, char *dataset, char *path,
zfs_smb_acl_op_t cmd, char *resource1, char *resource2)
{
zfs_cmd_t zc = {"\0"};
2009-07-03 02:44:48 +04:00
nvlist_t *nvlist = NULL;
int error;
(void) strlcpy(zc.zc_name, dataset, sizeof (zc.zc_name));
(void) strlcpy(zc.zc_value, path, sizeof (zc.zc_value));
zc.zc_cookie = (uint64_t)cmd;
if (cmd == ZFS_SMB_ACL_RENAME) {
if (nvlist_alloc(&nvlist, NV_UNIQUE_NAME, 0) != 0) {
(void) no_memory(hdl);
return (0);
2009-07-03 02:44:48 +04:00
}
}
switch (cmd) {
case ZFS_SMB_ACL_ADD:
case ZFS_SMB_ACL_REMOVE:
(void) strlcpy(zc.zc_string, resource1, sizeof (zc.zc_string));
break;
case ZFS_SMB_ACL_RENAME:
if (nvlist_add_string(nvlist, ZFS_SMB_ACL_SRC,
resource1) != 0) {
(void) no_memory(hdl);
return (-1);
}
if (nvlist_add_string(nvlist, ZFS_SMB_ACL_TARGET,
resource2) != 0) {
(void) no_memory(hdl);
return (-1);
}
zcmd_write_src_nvlist(hdl, &zc, nvlist);
2009-07-03 02:44:48 +04:00
break;
case ZFS_SMB_ACL_PURGE:
break;
default:
return (-1);
}
error = ioctl(hdl->libzfs_fd, ZFS_IOC_SMB_ACL, &zc);
nvlist_free(nvlist);
2009-07-03 02:44:48 +04:00
return (error);
}
int
zfs_smb_acl_add(libzfs_handle_t *hdl, char *dataset,
char *path, char *resource)
{
return (zfs_smb_acl_mgmt(hdl, dataset, path, ZFS_SMB_ACL_ADD,
resource, NULL));
}
int
zfs_smb_acl_remove(libzfs_handle_t *hdl, char *dataset,
char *path, char *resource)
{
return (zfs_smb_acl_mgmt(hdl, dataset, path, ZFS_SMB_ACL_REMOVE,
resource, NULL));
}
int
zfs_smb_acl_purge(libzfs_handle_t *hdl, char *dataset, char *path)
{
return (zfs_smb_acl_mgmt(hdl, dataset, path, ZFS_SMB_ACL_PURGE,
NULL, NULL));
}
int
zfs_smb_acl_rename(libzfs_handle_t *hdl, char *dataset, char *path,
char *oldname, char *newname)
{
return (zfs_smb_acl_mgmt(hdl, dataset, path, ZFS_SMB_ACL_RENAME,
oldname, newname));
}
int
zfs_userspace(zfs_handle_t *zhp, zfs_userquota_prop_t type,
zfs_userspace_cb_t func, void *arg)
{
zfs_cmd_t zc = {"\0"};
2009-07-03 02:44:48 +04:00
zfs_useracct_t buf[100];
libzfs_handle_t *hdl = zhp->zfs_hdl;
int ret;
2009-07-03 02:44:48 +04:00
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
2009-07-03 02:44:48 +04:00
zc.zc_objset_type = type;
zc.zc_nvlist_dst = (uintptr_t)buf;
for (;;) {
2009-07-03 02:44:48 +04:00
zfs_useracct_t *zua = buf;
zc.zc_nvlist_dst_size = sizeof (buf);
if (zfs_ioctl(hdl, ZFS_IOC_USERSPACE_MANY, &zc) != 0) {
if ((errno == ENOTSUP &&
(type == ZFS_PROP_USEROBJUSED ||
type == ZFS_PROP_GROUPOBJUSED ||
type == ZFS_PROP_USEROBJQUOTA ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
type == ZFS_PROP_GROUPOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED ||
type == ZFS_PROP_PROJECTOBJQUOTA ||
type == ZFS_PROP_PROJECTUSED ||
type == ZFS_PROP_PROJECTQUOTA)))
break;
return (zfs_standard_error_fmt(hdl, errno,
dgettext(TEXT_DOMAIN,
"cannot get used/quota for %s"), zc.zc_name));
}
if (zc.zc_nvlist_dst_size == 0)
2009-07-03 02:44:48 +04:00
break;
while (zc.zc_nvlist_dst_size > 0) {
if ((ret = func(arg, zua->zu_domain, zua->zu_rid,
zua->zu_space)) != 0)
return (ret);
2009-07-03 02:44:48 +04:00
zua++;
zc.zc_nvlist_dst_size -= sizeof (zfs_useracct_t);
}
}
return (0);
2009-07-03 02:44:48 +04:00
}
2009-08-18 22:43:27 +04:00
struct holdarg {
nvlist_t *nvl;
const char *snapname;
const char *tag;
boolean_t recursive;
int error;
};
static int
zfs_hold_one(zfs_handle_t *zhp, void *arg)
{
struct holdarg *ha = arg;
char name[ZFS_MAX_DATASET_NAME_LEN];
int rv = 0;
if (snprintf(name, sizeof (name), "%s@%s", zhp->zfs_name,
ha->snapname) >= sizeof (name))
return (EINVAL);
if (lzc_exists(name))
fnvlist_add_string(ha->nvl, name, ha->tag);
if (ha->recursive)
rv = zfs_iter_filesystems(zhp, zfs_hold_one, ha);
zfs_close(zhp);
return (rv);
}
2009-08-18 22:43:27 +04:00
int
zfs_hold(zfs_handle_t *zhp, const char *snapname, const char *tag,
boolean_t recursive, int cleanup_fd)
2009-08-18 22:43:27 +04:00
{
int ret;
struct holdarg ha;
2009-08-18 22:43:27 +04:00
ha.nvl = fnvlist_alloc();
ha.snapname = snapname;
ha.tag = tag;
ha.recursive = recursive;
(void) zfs_hold_one(zfs_handle_dup(zhp), &ha);
if (nvlist_empty(ha.nvl)) {
char errbuf[1024];
fnvlist_free(ha.nvl);
ret = ENOENT;
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot hold snapshot '%s@%s'"),
zhp->zfs_name, snapname);
(void) zfs_standard_error(zhp->zfs_hdl, ret, errbuf);
return (ret);
}
ret = zfs_hold_nvl(zhp, cleanup_fd, ha.nvl);
fnvlist_free(ha.nvl);
return (ret);
}
int
zfs_hold_nvl(zfs_handle_t *zhp, int cleanup_fd, nvlist_t *holds)
{
int ret;
nvlist_t *errors;
libzfs_handle_t *hdl = zhp->zfs_hdl;
char errbuf[1024];
nvpair_t *elem;
errors = NULL;
ret = lzc_hold(holds, cleanup_fd, &errors);
if (ret == 0) {
/* There may be errors even in the success case. */
fnvlist_free(errors);
return (0);
}
2009-08-18 22:43:27 +04:00
if (nvlist_empty(errors)) {
/* no hold-specific errors */
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot hold"));
switch (ret) {
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded"));
(void) zfs_error(hdl, EZFS_BADVERSION, errbuf);
break;
case EINVAL:
(void) zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
default:
(void) zfs_standard_error(hdl, ret, errbuf);
}
}
2009-08-18 22:43:27 +04:00
for (elem = nvlist_next_nvpair(errors, NULL);
elem != NULL;
elem = nvlist_next_nvpair(errors, elem)) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot hold snapshot '%s'"), nvpair_name(elem));
switch (fnvpair_value_int32(elem)) {
case E2BIG:
/*
* Temporary tags wind up having the ds object id
* prepended. So even if we passed the length check
* above, it's still possible for the tag to wind
* up being slightly too long.
*/
(void) zfs_error(hdl, EZFS_TAGTOOLONG, errbuf);
break;
2009-08-18 22:43:27 +04:00
case EINVAL:
(void) zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
2009-08-18 22:43:27 +04:00
case EEXIST:
(void) zfs_error(hdl, EZFS_REFTAG_HOLD, errbuf);
break;
2009-08-18 22:43:27 +04:00
default:
(void) zfs_standard_error(hdl,
fnvpair_value_int32(elem), errbuf);
2009-08-18 22:43:27 +04:00
}
}
fnvlist_free(errors);
return (ret);
}
static int
zfs_release_one(zfs_handle_t *zhp, void *arg)
{
struct holdarg *ha = arg;
char name[ZFS_MAX_DATASET_NAME_LEN];
int rv = 0;
nvlist_t *existing_holds;
if (snprintf(name, sizeof (name), "%s@%s", zhp->zfs_name,
ha->snapname) >= sizeof (name)) {
ha->error = EINVAL;
rv = EINVAL;
}
if (lzc_get_holds(name, &existing_holds) != 0) {
ha->error = ENOENT;
} else if (!nvlist_exists(existing_holds, ha->tag)) {
ha->error = ESRCH;
} else {
nvlist_t *torelease = fnvlist_alloc();
fnvlist_add_boolean(torelease, ha->tag);
fnvlist_add_nvlist(ha->nvl, name, torelease);
fnvlist_free(torelease);
}
if (ha->recursive)
rv = zfs_iter_filesystems(zhp, zfs_release_one, ha);
zfs_close(zhp);
return (rv);
2009-08-18 22:43:27 +04:00
}
int
zfs_release(zfs_handle_t *zhp, const char *snapname, const char *tag,
boolean_t recursive)
{
int ret;
struct holdarg ha;
nvlist_t *errors = NULL;
nvpair_t *elem;
2009-08-18 22:43:27 +04:00
libzfs_handle_t *hdl = zhp->zfs_hdl;
char errbuf[1024];
2009-08-18 22:43:27 +04:00
ha.nvl = fnvlist_alloc();
ha.snapname = snapname;
ha.tag = tag;
ha.recursive = recursive;
ha.error = 0;
(void) zfs_release_one(zfs_handle_dup(zhp), &ha);
if (nvlist_empty(ha.nvl)) {
fnvlist_free(ha.nvl);
ret = ha.error;
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot release hold from snapshot '%s@%s'"),
zhp->zfs_name, snapname);
if (ret == ESRCH) {
(void) zfs_error(hdl, EZFS_REFTAG_RELE, errbuf);
} else {
(void) zfs_standard_error(hdl, ret, errbuf);
}
return (ret);
}
ret = lzc_release(ha.nvl, &errors);
fnvlist_free(ha.nvl);
2009-08-18 22:43:27 +04:00
if (ret == 0) {
/* There may be errors even in the success case. */
fnvlist_free(errors);
return (0);
}
if (nvlist_empty(errors)) {
/* no hold-specific errors */
2009-08-18 22:43:27 +04:00
(void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN,
"cannot release"));
2009-08-18 22:43:27 +04:00
switch (errno) {
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded"));
(void) zfs_error(hdl, EZFS_BADVERSION, errbuf);
break;
default:
(void) zfs_standard_error(hdl, errno, errbuf);
}
}
for (elem = nvlist_next_nvpair(errors, NULL);
elem != NULL;
elem = nvlist_next_nvpair(errors, elem)) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot release hold from snapshot '%s'"),
nvpair_name(elem));
switch (fnvpair_value_int32(elem)) {
case ESRCH:
(void) zfs_error(hdl, EZFS_REFTAG_RELE, errbuf);
break;
2009-08-18 22:43:27 +04:00
case EINVAL:
(void) zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
2009-08-18 22:43:27 +04:00
default:
(void) zfs_standard_error(hdl,
fnvpair_value_int32(elem), errbuf);
2009-08-18 22:43:27 +04:00
}
}
fnvlist_free(errors);
return (ret);
2009-08-18 22:43:27 +04:00
}
int
zfs_get_fsacl(zfs_handle_t *zhp, nvlist_t **nvl)
{
zfs_cmd_t zc = {"\0"};
libzfs_handle_t *hdl = zhp->zfs_hdl;
int nvsz = 2048;
void *nvbuf;
int err = 0;
char errbuf[1024];
assert(zhp->zfs_type == ZFS_TYPE_VOLUME ||
zhp->zfs_type == ZFS_TYPE_FILESYSTEM);
tryagain:
nvbuf = malloc(nvsz);
if (nvbuf == NULL) {
err = (zfs_error(hdl, EZFS_NOMEM, strerror(errno)));
goto out;
}
zc.zc_nvlist_dst_size = nvsz;
zc.zc_nvlist_dst = (uintptr_t)nvbuf;
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
if (zfs_ioctl(hdl, ZFS_IOC_GET_FSACL, &zc) != 0) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot get permissions on '%s'"),
zc.zc_name);
switch (errno) {
case ENOMEM:
free(nvbuf);
nvsz = zc.zc_nvlist_dst_size;
goto tryagain;
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded"));
err = zfs_error(hdl, EZFS_BADVERSION, errbuf);
break;
case EINVAL:
err = zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
case ENOENT:
err = zfs_error(hdl, EZFS_NOENT, errbuf);
break;
default:
err = zfs_standard_error(hdl, errno, errbuf);
break;
}
} else {
/* success */
int rc = nvlist_unpack(nvbuf, zc.zc_nvlist_dst_size, nvl, 0);
if (rc) {
err = zfs_standard_error_fmt(hdl, rc, dgettext(
TEXT_DOMAIN, "cannot get permissions on '%s'"),
zc.zc_name);
}
}
free(nvbuf);
out:
return (err);
}
int
zfs_set_fsacl(zfs_handle_t *zhp, boolean_t un, nvlist_t *nvl)
{
zfs_cmd_t zc = {"\0"};
libzfs_handle_t *hdl = zhp->zfs_hdl;
char *nvbuf;
char errbuf[1024];
size_t nvsz;
int err;
assert(zhp->zfs_type == ZFS_TYPE_VOLUME ||
zhp->zfs_type == ZFS_TYPE_FILESYSTEM);
err = nvlist_size(nvl, &nvsz, NV_ENCODE_NATIVE);
assert(err == 0);
nvbuf = malloc(nvsz);
err = nvlist_pack(nvl, &nvbuf, &nvsz, NV_ENCODE_NATIVE, 0);
assert(err == 0);
zc.zc_nvlist_src_size = nvsz;
zc.zc_nvlist_src = (uintptr_t)nvbuf;
zc.zc_perm_action = un;
(void) strlcpy(zc.zc_name, zhp->zfs_name, sizeof (zc.zc_name));
if (zfs_ioctl(hdl, ZFS_IOC_SET_FSACL, &zc) != 0) {
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot set permissions on '%s'"),
zc.zc_name);
switch (errno) {
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded"));
err = zfs_error(hdl, EZFS_BADVERSION, errbuf);
break;
case EINVAL:
err = zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
case ENOENT:
err = zfs_error(hdl, EZFS_NOENT, errbuf);
break;
default:
err = zfs_standard_error(hdl, errno, errbuf);
break;
}
}
free(nvbuf);
return (err);
}
int
zfs_get_holds(zfs_handle_t *zhp, nvlist_t **nvl)
{
int err;
char errbuf[1024];
err = lzc_get_holds(zhp->zfs_name, nvl);
if (err != 0) {
libzfs_handle_t *hdl = zhp->zfs_hdl;
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN, "cannot get holds for '%s'"),
zhp->zfs_name);
switch (err) {
case ENOTSUP:
zfs_error_aux(hdl, dgettext(TEXT_DOMAIN,
"pool must be upgraded"));
err = zfs_error(hdl, EZFS_BADVERSION, errbuf);
break;
case EINVAL:
err = zfs_error(hdl, EZFS_BADTYPE, errbuf);
break;
case ENOENT:
err = zfs_error(hdl, EZFS_NOENT, errbuf);
break;
default:
err = zfs_standard_error(hdl, errno, errbuf);
break;
}
}
return (err);
}
/*
* The theory of raidz space accounting
*
* The "referenced" property of RAIDZ vdevs is scaled such that a 128KB block
* will "reference" 128KB, even though it allocates more than that, to store the
* parity information (and perhaps skip sectors). This concept of the
* "referenced" (and other DMU space accounting) being lower than the allocated
* space by a constant factor is called "raidz deflation."
*
* As mentioned above, the constant factor for raidz deflation assumes a 128KB
* block size. However, zvols typically have a much smaller block size (default
* 8KB). These smaller blocks may require proportionally much more parity
* information (and perhaps skip sectors). In this case, the change to the
* "referenced" property may be much more than the logical block size.
*
* Suppose a raidz vdev has 5 disks with ashift=12. A 128k block may be written
* as follows.
*
* +-------+-------+-------+-------+-------+
* | disk1 | disk2 | disk3 | disk4 | disk5 |
* +-------+-------+-------+-------+-------+
* | P0 | D0 | D8 | D16 | D24 |
* | P1 | D1 | D9 | D17 | D25 |
* | P2 | D2 | D10 | D18 | D26 |
* | P3 | D3 | D11 | D19 | D27 |
* | P4 | D4 | D12 | D20 | D28 |
* | P5 | D5 | D13 | D21 | D29 |
* | P6 | D6 | D14 | D22 | D30 |
* | P7 | D7 | D15 | D23 | D31 |
* +-------+-------+-------+-------+-------+
*
* Above, notice that 160k was allocated: 8 x 4k parity sectors + 32 x 4k data
* sectors. The dataset's referenced will increase by 128k and the pool's
* allocated and free properties will be adjusted by 160k.
*
* A 4k block written to the same raidz vdev will require two 4k sectors. The
* blank cells represent unallocated space.
*
* +-------+-------+-------+-------+-------+
* | disk1 | disk2 | disk3 | disk4 | disk5 |
* +-------+-------+-------+-------+-------+
* | P0 | D0 | | | |
* +-------+-------+-------+-------+-------+
*
* Above, notice that the 4k block required one sector for parity and another
* for data. vdev_raidz_asize() will return 8k and as such the pool's allocated
* and free properties will be adjusted by 8k. The dataset will not be charged
* 8k. Rather, it will be charged a value that is scaled according to the
* overhead of the 128k block on the same vdev. This 8k allocation will be
* charged 8k * 128k / 160k. 128k is from SPA_OLD_MAXBLOCKSIZE and 160k is as
* calculated in the 128k block example above.
*
* Every raidz allocation is sized to be a multiple of nparity+1 sectors. That
* is, every raidz1 allocation will be a multiple of 2 sectors, raidz2
* allocations are a multiple of 3 sectors, and raidz3 allocations are a
* multiple of of 4 sectors. When a block does not fill the required number of
* sectors, skip blocks (sectors) are used.
*
* An 8k block being written to a raidz vdev may be written as follows:
*
* +-------+-------+-------+-------+-------+
* | disk1 | disk2 | disk3 | disk4 | disk5 |
* +-------+-------+-------+-------+-------+
* | P0 | D0 | D1 | S0 | |
* +-------+-------+-------+-------+-------+
*
* In order to maintain the nparity+1 allocation size, a skip block (S0) was
* added. For this 8k block, the pool's allocated and free properties are
* adjusted by 16k and the dataset's referenced is increased by 16k * 128k /
* 160k. Again, 128k is from SPA_OLD_MAXBLOCKSIZE and 160k is as calculated in
* the 128k block example above.
*
* The situation is slightly different for dRAID since the minimum allocation
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
* size is the full group width. The same 8K block above would be written as
* follows in a dRAID group:
*
* +-------+-------+-------+-------+-------+
* | disk1 | disk2 | disk3 | disk4 | disk5 |
* +-------+-------+-------+-------+-------+
* | P0 | D0 | D1 | S0 | S1 |
* +-------+-------+-------+-------+-------+
*
* Compression may lead to a variety of block sizes being written for the same
* volume or file. There is no clear way to reserve just the amount of space
* that will be required, so the worst case (no compression) is assumed.
* Note that metadata blocks will typically be compressed, so the reservation
* size returned by zvol_volsize_to_reservation() will generally be slightly
* larger than the maximum that the volume can reference.
*/
/*
* Derived from function of same name in module/zfs/vdev_raidz.c. Returns the
* amount of space (in bytes) that will be allocated for the specified block
* size. Note that the "referenced" space accounted will be less than this, but
* not necessarily equal to "blksize", due to RAIDZ deflation.
*/
static uint64_t
vdev_raidz_asize(uint64_t ndisks, uint64_t nparity, uint64_t ashift,
uint64_t blksize)
{
uint64_t asize, ndata;
ASSERT3U(ndisks, >, nparity);
ndata = ndisks - nparity;
asize = ((blksize - 1) >> ashift) + 1;
asize += nparity * ((asize + ndata - 1) / ndata);
asize = roundup(asize, nparity + 1) << ashift;
return (asize);
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
/*
* Derived from function of same name in module/zfs/vdev_draid.c. Returns the
* amount of space (in bytes) that will be allocated for the specified block
* size.
*/
static uint64_t
vdev_draid_asize(uint64_t ndisks, uint64_t nparity, uint64_t ashift,
uint64_t blksize)
{
ASSERT3U(ndisks, >, nparity);
uint64_t ndata = ndisks - nparity;
uint64_t rows = ((blksize - 1) / (ndata << ashift)) + 1;
uint64_t asize = (rows * ndisks) << ashift;
return (asize);
}
/*
* Determine how much space will be allocated if it lands on the most space-
* inefficient top-level vdev. Returns the size in bytes required to store one
* copy of the volume data. See theory comment above.
*/
static uint64_t
volsize_from_vdevs(zpool_handle_t *zhp, uint64_t nblocks, uint64_t blksize)
{
nvlist_t *config, *tree, **vdevs;
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
uint_t nvdevs;
uint64_t ret = 0;
config = zpool_get_config(zhp, NULL);
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &tree) != 0 ||
nvlist_lookup_nvlist_array(tree, ZPOOL_CONFIG_CHILDREN,
&vdevs, &nvdevs) != 0) {
return (nblocks * blksize);
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
for (int v = 0; v < nvdevs; v++) {
char *type;
uint64_t nparity, ashift, asize, tsize;
uint64_t volsize;
if (nvlist_lookup_string(vdevs[v], ZPOOL_CONFIG_TYPE,
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
&type) != 0)
continue;
if (strcmp(type, VDEV_TYPE_RAIDZ) != 0 &&
strcmp(type, VDEV_TYPE_DRAID) != 0)
continue;
if (nvlist_lookup_uint64(vdevs[v],
ZPOOL_CONFIG_NPARITY, &nparity) != 0)
continue;
if (nvlist_lookup_uint64(vdevs[v],
ZPOOL_CONFIG_ASHIFT, &ashift) != 0)
continue;
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) {
nvlist_t **disks;
uint_t ndisks;
if (nvlist_lookup_nvlist_array(vdevs[v],
ZPOOL_CONFIG_CHILDREN, &disks, &ndisks) != 0)
continue;
/* allocation size for the "typical" 128k block */
tsize = vdev_raidz_asize(ndisks, nparity, ashift,
SPA_OLD_MAXBLOCKSIZE);
/* allocation size for the blksize block */
asize = vdev_raidz_asize(ndisks, nparity, ashift,
blksize);
} else {
uint64_t ndata;
if (nvlist_lookup_uint64(vdevs[v],
ZPOOL_CONFIG_DRAID_NDATA, &ndata) != 0)
continue;
/* allocation size for the "typical" 128k block */
tsize = vdev_draid_asize(ndata + nparity, nparity,
ashift, SPA_OLD_MAXBLOCKSIZE);
/* allocation size for the blksize block */
asize = vdev_draid_asize(ndata + nparity, nparity,
ashift, blksize);
}
/*
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
* Scale this size down as a ratio of 128k / tsize.
* See theory statement above.
*/
volsize = nblocks * asize * SPA_OLD_MAXBLOCKSIZE / tsize;
if (volsize > ret) {
ret = volsize;
}
}
if (ret == 0) {
ret = nblocks * blksize;
}
return (ret);
}
/*
* Convert the zvol's volume size to an appropriate reservation. See theory
* comment above.
*
* Note: If this routine is updated, it is necessary to update the ZFS test
* suite's shell version in reservation.shlib.
*/
uint64_t
zvol_volsize_to_reservation(zpool_handle_t *zph, uint64_t volsize,
nvlist_t *props)
{
uint64_t numdb;
uint64_t nblocks, volblocksize;
int ncopies;
char *strval;
if (nvlist_lookup_string(props,
zfs_prop_to_name(ZFS_PROP_COPIES), &strval) == 0)
ncopies = atoi(strval);
else
ncopies = 1;
if (nvlist_lookup_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
&volblocksize) != 0)
volblocksize = ZVOL_DEFAULT_BLOCKSIZE;
nblocks = volsize / volblocksize;
/*
* Metadata defaults to using 128k blocks, not volblocksize blocks. For
* this reason, only the data blocks are scaled based on vdev config.
*/
volsize = volsize_from_vdevs(zph, nblocks, volblocksize);
/* start with metadnode L0-L6 */
numdb = 7;
/* calculate number of indirects */
while (nblocks > 1) {
nblocks += DNODES_PER_LEVEL - 1;
nblocks /= DNODES_PER_LEVEL;
numdb += nblocks;
}
numdb *= MIN(SPA_DVAS_PER_BP, ncopies + 1);
volsize *= ncopies;
/*
* this is exactly DN_MAX_INDBLKSHIFT when metadata isn't
* compressed, but in practice they compress down to about
* 1100 bytes
*/
numdb *= 1ULL << DN_MAX_INDBLKSHIFT;
volsize += numdb;
return (volsize);
}
/*
* Wait for the given activity and return the status of the wait (whether or not
* any waiting was done) in the 'waited' parameter. Non-existent fses are
* reported via the 'missing' parameter, rather than by printing an error
* message. This is convenient when this function is called in a loop over a
* long period of time (as it is, for example, by zfs's wait cmd). In that
* scenario, a fs being exported or destroyed should be considered a normal
* event, so we don't want to print an error when we find that the fs doesn't
* exist.
*/
int
zfs_wait_status(zfs_handle_t *zhp, zfs_wait_activity_t activity,
boolean_t *missing, boolean_t *waited)
{
int error = lzc_wait_fs(zhp->zfs_name, activity, waited);
*missing = (error == ENOENT);
if (*missing)
return (0);
if (error != 0) {
(void) zfs_standard_error_fmt(zhp->zfs_hdl, error,
dgettext(TEXT_DOMAIN, "error waiting in fs '%s'"),
zhp->zfs_name);
}
return (error);
}