mirror_zfs/rpm/generic/zfs.spec.in

315 lines
8.0 KiB
RPMSpec
Raw Normal View History

%global _sbindir /sbin
%global _libdir /%{_lib}
# Set the default udev directory based on distribution.
%if %{undefined _udevdir}
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
%global _udevdir %{_prefix}/lib/udev
%else
%global _udevdir /lib/udev
%endif
%endif
# Set the default udevrule directory based on distribution.
%if %{undefined _udevruledir}
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
%global _udevruledir %{_prefix}/lib/udev/rules.d
%else
%global _udevruledir /lib/udev/rules.d
%endif
%endif
# Set the default dracut directory based on distribution.
%if %{undefined _dracutdir}
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
%global _dracutdir %{_prefix}/lib/dracut
%else
%global _dracutdir %{_prefix}/share/dracut
%endif
%endif
%bcond_with debug
%bcond_with blkid
%bcond_with systemd
# Generic enable switch for systemd
%if %{with systemd}
%define _systemd 1
%endif
# RHEL >= 7 comes with systemd
%if 0%{?rhel} >= 7
%define _systemd 1
%endif
# Fedora >= 15 comes with systemd, but only >= 18 has
# the proper macros
%if 0%{?fedora} >= 18
%define _systemd 1
%endif
# opensuse >= 12.1 comes with systemd, but only >= 13.1
# has the proper macros
%if 0%{?suse_version} >= 1310
%define _systemd 1
%endif
Name: @PACKAGE@
Version: @VERSION@
Release: @RELEASE@%{?dist}
Summary: Commands to control the kernel modules and libraries
Group: System Environment/Kernel
License: @ZFS_META_LICENSE@
URL: http://zfsonlinux.org/
Source0: %{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
ExclusiveArch: i386 i686 x86_64
# May build but untested on ppc/ppc64
ExcludeArch: ppc ppc64
Requires: spl = %{version}
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
Requires: libzpool2 = %{version}
Requires: libnvpair1 = %{version}
Requires: libuutil1 = %{version}
Requires: libzfs2 = %{version}
Requires: %{name}-kmod = %{version}
Provides: %{name}-kmod-common = %{version}
# zfs-fuse provides the same commands and man pages that ZoL does. Renaming
# those on either side would conflict with all available documentation.
Conflicts: zfs-fuse
%if 0%{?rhel}%{?fedora}%{?suse_version}
BuildRequires: zlib-devel
BuildRequires: libuuid-devel
%if %{with blkid}
BuildRequires: libblkid-devel
%endif
%endif
%if 0%{?_systemd}
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
BuildRequires: systemd
%endif
%description
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
This package contains the ZFS command line utilities.
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%package -n libzpool2
Summary: Native ZFS pool library for Linux
Group: System Environment/Kernel
%description -n libzpool2
This package contains the zpool library, which provides support
for managing zpools
%post -n libzpool2 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%postun -n libzpool2 -p /sbin/ldconfig
%package -n libnvpair1
Summary: Solaris name-value library for Linux
Group: System Environment/Kernel
%description -n libnvpair1
This package contains routines for packing and unpacking name-value
pairs. This functionality is used to portably transport data across
process boundaries, between kernel and user space, and can be used
to write self describing data structures on disk.
%post -n libnvpair1 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%postun -n libnvpair1 -p /sbin/ldconfig
%package -n libuutil1
Summary: Solaris userland utility library for Linux
Group: System Environment/Kernel
%description -n libuutil1
This library provides a variety of compatibility functions for ZFS on Linux:
* libspl: The Solaris Porting Layer userland library, which provides APIs
that make it possible to run Solaris user code in a Linux environment
with relatively minimal modification.
* libavl: The Adelson-Velskii Landis balanced binary tree manipulation
library.
* libefi: The Extensible Firmware Interface library for GUID disk
partitioning.
* libshare: NFS, SMB, and iSCSI service integration for ZFS.
%post -n libuutil1 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%postun -n libuutil1 -p /sbin/ldconfig
%package -n libzfs2
Summary: Native ZFS filesystem library for Linux
Group: System Environment/Kernel
%description -n libzfs2
This package provides support for managing ZFS filesystems
%post -n libzfs2 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%postun -n libzfs2 -p /sbin/ldconfig
%package -n libzfs2-devel
Summary: Development headers
Group: System Environment/Kernel
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
Requires: libzfs2 = %{version}
Requires: libzpool2 = %{version}
Requires: libnvpair1 = %{version}
Requires: libuutil1 = %{version}
Provides: libzpool2-devel
Provides: libnvpair1-devel
Provides: libuutil1-devel
Obsoletes: zfs-devel
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%description -n libzfs2-devel
This package contains the header files needed for building additional
applications against the ZFS libraries.
%package test
Summary: Test infrastructure
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: parted
Requires: lsscsi
Requires: mdadm
Requires: bc
%description test
This package contains test infrastructure and support scripts for
validating the file system.
%package dracut
Summary: Dracut module
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: dracut
%description dracut
This package contains a dracut module used to construct an initramfs
image which is ZFS aware.
%prep
%if %{with debug}
%define debug --enable-debug
%else
%define debug --disable-debug
%endif
%if %{with blkid}
%define blkid --with-blkid
%else
%define blkid --without-blkid
%endif
%if 0%{?_systemd}
%define systemd --enable-systemd --with-systemdunitdir=%{_unitdir} --with-systemdpresetdir=%{_presetdir} --disable-sysvinit
%else
%define systemd --enable-sysvinit --disable-systemd
%endif
%setup -q
%build
%configure \
--with-config=user \
--with-udevdir=%{_udevdir} \
--with-udevruledir=%{_udevruledir} \
--with-dracutdir=%{_dracutdir} \
--disable-static \
%{debug} \
%{blkid} \
%{systemd}
make %{?_smp_mflags}
%install
%{__rm} -rf $RPM_BUILD_ROOT
make install DESTDIR=%{?buildroot}
find %{?buildroot}%{_libdir} -name '*.la' -exec rm -f {} \;
%post
%if 0%{?_systemd}
%systemd_post zfs.target
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 21:35:45 +03:00
if [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --add zfs-import
/sbin/chkconfig --add zfs-mount
/sbin/chkconfig --add zfs-share
/sbin/chkconfig --add zfs-zed
fi
%endif
exit 0
%preun
%if 0%{?_systemd}
%systemd_preun zfs.target
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 21:35:45 +03:00
if [ $1 -eq 0 ] && [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --del zfs-import
/sbin/chkconfig --del zfs-mount
/sbin/chkconfig --del zfs-share
/sbin/chkconfig --del zfs-zed
fi
%endif
exit 0
%postun
%if 0%{?_systemd}
%systemd_postun zfs.target
%endif
%files
%{_sbindir}/*
%{_bindir}/*
%{_libexecdir}/%{name}
%{_mandir}/man1/*
%{_mandir}/man5/*
%{_mandir}/man8/*
%{_udevdir}/vdev_id
%{_udevdir}/zvol_id
%{_udevdir}/rules.d/*
%if 0%{?_systemd}
/usr/lib/modules-load.d/*
%{_unitdir}/*
%{_presetdir}/*
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 21:35:45 +03:00
%config(noreplace) %{_sysconfdir}/init.d/*
%config(noreplace) %{_initconfdir}/zfs
%endif
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 21:35:45 +03:00
%config(noreplace) %{_sysconfdir}/%{name}
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%files -n libzpool2
%{_libdir}/libzpool.so.*
%files -n libnvpair1
%{_libdir}/libnvpair.so.*
%files -n libuutil1
%{_libdir}/libuutil.so.*
%files -n libzfs2
%{_libdir}/libzfs*.so.*
%files -n libzfs2-devel
%{_datadir}/pkgconfig/libzfs.pc
%{_datadir}/pkgconfig/libzfs_core.pc
%{_libdir}/*.so
%{_includedir}/*
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 15:20:59 +04:00
%doc AUTHORS COPYRIGHT DISCLAIMER
%doc OPENSOLARIS.LICENSE README.markdown
%files test
%{_datadir}/%{name}
%files dracut
%doc dracut/README.dracut.markdown
%{_dracutdir}/modules.d/*
%changelog
* Wed Apr 8 2015 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.4-1
- Released 0.6.4-1
* Thu Jun 12 2014 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.3-1
- Released 0.6.3-1
* Wed Aug 21 2013 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.2-1
- Released 0.6.2-1
* Fri Mar 22 2013 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.1-1
- First official stable release.