mirror_zfs/module/zcommon/zfs_prop.c

679 lines
21 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011 by Delphix. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
/* Portions Copyright 2010 Robert Milkowski */
2008-11-20 23:01:55 +03:00
#include <sys/zio.h>
#include <sys/spa.h>
#include <sys/u8_textprep.h>
#include <sys/zfs_acl.h>
#include <sys/zfs_ioctl.h>
#include <sys/zfs_znode.h>
#include "zfs_prop.h"
#include "zfs_deleg.h"
#if defined(_KERNEL)
#include <sys/systm.h>
#else
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#endif
static zprop_desc_t zfs_prop_table[ZFS_NUM_PROPS];
2009-07-03 02:44:48 +04:00
/* Note this is indexed by zfs_userquota_prop_t, keep the order the same */
const char *zfs_userquota_prop_prefixes[] = {
"userused@",
"userquota@",
"groupused@",
"groupquota@"
};
2008-11-20 23:01:55 +03:00
zprop_desc_t *
zfs_prop_get_table(void)
{
return (zfs_prop_table);
}
void
zfs_prop_init(void)
{
static zprop_index_t checksum_table[] = {
{ "on", ZIO_CHECKSUM_ON },
{ "off", ZIO_CHECKSUM_OFF },
{ "fletcher2", ZIO_CHECKSUM_FLETCHER_2 },
{ "fletcher4", ZIO_CHECKSUM_FLETCHER_4 },
{ "sha256", ZIO_CHECKSUM_SHA256 },
{ NULL }
};
static zprop_index_t dedup_table[] = {
{ "on", ZIO_CHECKSUM_ON },
{ "off", ZIO_CHECKSUM_OFF },
{ "verify", ZIO_CHECKSUM_ON | ZIO_CHECKSUM_VERIFY },
{ "sha256", ZIO_CHECKSUM_SHA256 },
{ "sha256,verify",
ZIO_CHECKSUM_SHA256 | ZIO_CHECKSUM_VERIFY },
{ NULL }
};
2008-11-20 23:01:55 +03:00
static zprop_index_t compress_table[] = {
{ "on", ZIO_COMPRESS_ON },
{ "off", ZIO_COMPRESS_OFF },
{ "lzjb", ZIO_COMPRESS_LZJB },
{ "gzip", ZIO_COMPRESS_GZIP_6 }, /* gzip default */
{ "gzip-1", ZIO_COMPRESS_GZIP_1 },
{ "gzip-2", ZIO_COMPRESS_GZIP_2 },
{ "gzip-3", ZIO_COMPRESS_GZIP_3 },
{ "gzip-4", ZIO_COMPRESS_GZIP_4 },
{ "gzip-5", ZIO_COMPRESS_GZIP_5 },
{ "gzip-6", ZIO_COMPRESS_GZIP_6 },
{ "gzip-7", ZIO_COMPRESS_GZIP_7 },
{ "gzip-8", ZIO_COMPRESS_GZIP_8 },
{ "gzip-9", ZIO_COMPRESS_GZIP_9 },
{ "zle", ZIO_COMPRESS_ZLE },
{ "lz4", ZIO_COMPRESS_LZ4 },
2008-11-20 23:01:55 +03:00
{ NULL }
};
static zprop_index_t snapdir_table[] = {
{ "hidden", ZFS_SNAPDIR_HIDDEN },
{ "visible", ZFS_SNAPDIR_VISIBLE },
{ NULL }
};
Add snapdev=[hidden|visible] dataset property The new snapdev dataset property may be set to control the visibility of zvol snapshot devices. By default this value is set to 'hidden' which will prevent zvol snapshots from appearing under /dev/zvol/ and /dev/<dataset>/. When set to 'visible' all zvol snapshots for the dataset will be visible. This functionality was largely added because when automatic snapshoting is enabled large numbers of read-only zvol snapshots will be created. When creating these devices the kernel will attempt to read their partition tables, and blkid will attempt to identify any filesystems on those partitions. This leads to a variety of issues: 1) The zvol partition tables will be read in the context of the `modprobe zfs` for automatically imported pools. This is undesirable and should be done asynchronously, but for now reducing the number of visible devices helps. 2) Udev expects to be able to complete its work for a new block devices fairly quickly. When many zvol devices are added at the same time this is no longer be true. It can lead to udev timeouts and missing /dev/zvol links. 3) Simply having lots of devices in /dev/ can be aukward from a management standpoint. Hidding the devices your unlikely to ever use helps with this. Any snapshot device which is needed can be made visible by changing the snapdev property. NOTE: This patch changes the default behavior for zvols which was effectively 'snapdev=visible'. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1235 Closes #945 Issue #956 Issue #756
2013-02-14 03:11:59 +04:00
static zprop_index_t snapdev_table[] = {
{ "hidden", ZFS_SNAPDEV_HIDDEN },
{ "visible", ZFS_SNAPDEV_VISIBLE },
{ NULL }
};
static zprop_index_t acltype_table[] = {
{ "off", ZFS_ACLTYPE_OFF },
{ "disabled", ZFS_ACLTYPE_OFF },
{ "noacl", ZFS_ACLTYPE_OFF },
{ "posixacl", ZFS_ACLTYPE_POSIXACL },
{ NULL }
};
2008-11-20 23:01:55 +03:00
static zprop_index_t acl_inherit_table[] = {
{ "discard", ZFS_ACL_DISCARD },
{ "noallow", ZFS_ACL_NOALLOW },
{ "restricted", ZFS_ACL_RESTRICTED },
{ "passthrough", ZFS_ACL_PASSTHROUGH },
{ "secure", ZFS_ACL_RESTRICTED }, /* bkwrd compatability */
{ "passthrough-x", ZFS_ACL_PASSTHROUGH_X },
2008-11-20 23:01:55 +03:00
{ NULL }
};
static zprop_index_t case_table[] = {
{ "sensitive", ZFS_CASE_SENSITIVE },
{ "insensitive", ZFS_CASE_INSENSITIVE },
{ "mixed", ZFS_CASE_MIXED },
{ NULL }
};
static zprop_index_t copies_table[] = {
{ "1", 1 },
{ "2", 2 },
{ "3", 3 },
{ NULL }
};
/*
* Use the unique flags we have to send to u8_strcmp() and/or
* u8_textprep() to represent the various normalization property
* values.
*/
static zprop_index_t normalize_table[] = {
{ "none", 0 },
{ "formD", U8_TEXTPREP_NFD },
{ "formKC", U8_TEXTPREP_NFKC },
{ "formC", U8_TEXTPREP_NFC },
{ "formKD", U8_TEXTPREP_NFKD },
{ NULL }
};
static zprop_index_t version_table[] = {
{ "1", 1 },
{ "2", 2 },
{ "3", 3 },
2009-07-03 02:44:48 +04:00
{ "4", 4 },
{ "5", 5 },
2008-11-20 23:01:55 +03:00
{ "current", ZPL_VERSION },
{ NULL }
};
static zprop_index_t boolean_table[] = {
{ "off", 0 },
{ "on", 1 },
{ NULL }
};
static zprop_index_t logbias_table[] = {
{ "latency", ZFS_LOGBIAS_LATENCY },
{ "throughput", ZFS_LOGBIAS_THROUGHPUT },
{ NULL }
};
2008-11-20 23:01:55 +03:00
static zprop_index_t canmount_table[] = {
{ "off", ZFS_CANMOUNT_OFF },
{ "on", ZFS_CANMOUNT_ON },
{ "noauto", ZFS_CANMOUNT_NOAUTO },
{ NULL }
};
static zprop_index_t cache_table[] = {
{ "none", ZFS_CACHE_NONE },
{ "metadata", ZFS_CACHE_METADATA },
{ "all", ZFS_CACHE_ALL },
{ NULL }
};
static zprop_index_t sync_table[] = {
{ "standard", ZFS_SYNC_STANDARD },
{ "always", ZFS_SYNC_ALWAYS },
{ "disabled", ZFS_SYNC_DISABLED },
{ NULL }
};
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
static zprop_index_t xattr_table[] = {
{ "off", ZFS_XATTR_OFF },
{ "on", ZFS_XATTR_DIR },
{ "sa", ZFS_XATTR_SA },
{ "dir", ZFS_XATTR_DIR },
{ NULL }
};
2008-11-20 23:01:55 +03:00
/* inherit index properties */
zprop_register_index(ZFS_PROP_SYNC, "sync", ZFS_SYNC_STANDARD,
2008-11-20 23:01:55 +03:00
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"standard | always | disabled", "SYNC",
sync_table);
zprop_register_index(ZFS_PROP_CHECKSUM, "checksum",
ZIO_CHECKSUM_DEFAULT, PROP_INHERIT, ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_VOLUME,
2008-11-20 23:01:55 +03:00
"on | off | fletcher2 | fletcher4 | sha256", "CHECKSUM",
checksum_table);
zprop_register_index(ZFS_PROP_DEDUP, "dedup", ZIO_CHECKSUM_OFF,
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"on | off | verify | sha256[,verify]", "DEDUP",
dedup_table);
zprop_register_index(ZFS_PROP_COMPRESSION, "compression",
2008-11-20 23:01:55 +03:00
ZIO_COMPRESS_DEFAULT, PROP_INHERIT,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"on | off | lzjb | gzip | gzip-[1-9] | zle | lz4", "COMPRESS",
compress_table);
zprop_register_index(ZFS_PROP_SNAPDIR, "snapdir", ZFS_SNAPDIR_HIDDEN,
2008-11-20 23:01:55 +03:00
PROP_INHERIT, ZFS_TYPE_FILESYSTEM,
"hidden | visible", "SNAPDIR", snapdir_table);
Add snapdev=[hidden|visible] dataset property The new snapdev dataset property may be set to control the visibility of zvol snapshot devices. By default this value is set to 'hidden' which will prevent zvol snapshots from appearing under /dev/zvol/ and /dev/<dataset>/. When set to 'visible' all zvol snapshots for the dataset will be visible. This functionality was largely added because when automatic snapshoting is enabled large numbers of read-only zvol snapshots will be created. When creating these devices the kernel will attempt to read their partition tables, and blkid will attempt to identify any filesystems on those partitions. This leads to a variety of issues: 1) The zvol partition tables will be read in the context of the `modprobe zfs` for automatically imported pools. This is undesirable and should be done asynchronously, but for now reducing the number of visible devices helps. 2) Udev expects to be able to complete its work for a new block devices fairly quickly. When many zvol devices are added at the same time this is no longer be true. It can lead to udev timeouts and missing /dev/zvol links. 3) Simply having lots of devices in /dev/ can be aukward from a management standpoint. Hidding the devices your unlikely to ever use helps with this. Any snapshot device which is needed can be made visible by changing the snapdev property. NOTE: This patch changes the default behavior for zvols which was effectively 'snapdev=visible'. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1235 Closes #945 Issue #956 Issue #756
2013-02-14 03:11:59 +04:00
zprop_register_index(ZFS_PROP_SNAPDEV, "snapdev", ZFS_SNAPDEV_HIDDEN,
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"hidden | visible", "SNAPDEV", snapdev_table);
zprop_register_index(ZFS_PROP_ACLTYPE, "acltype", ZFS_ACLTYPE_OFF,
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT,
"noacl | posixacl", "ACLTYPE", acltype_table);
zprop_register_index(ZFS_PROP_ACLINHERIT, "aclinherit",
ZFS_ACL_RESTRICTED, PROP_INHERIT, ZFS_TYPE_FILESYSTEM,
"discard | noallow | restricted | passthrough | passthrough-x",
2008-11-20 23:01:55 +03:00
"ACLINHERIT", acl_inherit_table);
zprop_register_index(ZFS_PROP_COPIES, "copies", 1, PROP_INHERIT,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
2008-11-20 23:01:55 +03:00
"1 | 2 | 3", "COPIES", copies_table);
zprop_register_index(ZFS_PROP_PRIMARYCACHE, "primarycache",
ZFS_CACHE_ALL, PROP_INHERIT,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT | ZFS_TYPE_VOLUME,
"all | none | metadata", "PRIMARYCACHE", cache_table);
zprop_register_index(ZFS_PROP_SECONDARYCACHE, "secondarycache",
ZFS_CACHE_ALL, PROP_INHERIT,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT | ZFS_TYPE_VOLUME,
"all | none | metadata", "SECONDARYCACHE", cache_table);
zprop_register_index(ZFS_PROP_LOGBIAS, "logbias", ZFS_LOGBIAS_LATENCY,
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"latency | throughput", "LOGBIAS", logbias_table);
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
zprop_register_index(ZFS_PROP_XATTR, "xattr", ZFS_XATTR_DIR,
PROP_INHERIT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT,
"on | off | dir | sa", "XATTR", xattr_table);
2008-11-20 23:01:55 +03:00
/* inherit index (boolean) properties */
zprop_register_index(ZFS_PROP_ATIME, "atime", 1, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "on | off", "ATIME", boolean_table);
zprop_register_index(ZFS_PROP_DEVICES, "devices", 1, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT, "on | off", "DEVICES",
boolean_table);
zprop_register_index(ZFS_PROP_EXEC, "exec", 1, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT, "on | off", "EXEC",
boolean_table);
zprop_register_index(ZFS_PROP_SETUID, "setuid", 1, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT, "on | off", "SETUID",
boolean_table);
zprop_register_index(ZFS_PROP_READONLY, "readonly", 0, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "on | off", "RDONLY",
boolean_table);
zprop_register_index(ZFS_PROP_ZONED, "zoned", 0, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "on | off", "ZONED", boolean_table);
zprop_register_index(ZFS_PROP_VSCAN, "vscan", 0, PROP_INHERIT,
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
ZFS_TYPE_FILESYSTEM, "on | off", "VSCAN", boolean_table);
zprop_register_index(ZFS_PROP_NBMAND, "nbmand", 0, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT, "on | off", "NBMAND",
boolean_table);
/* default index properties */
zprop_register_index(ZFS_PROP_VERSION, "version", 0, PROP_DEFAULT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT,
"1 | 2 | 3 | 4 | 5 | current", "VERSION", version_table);
zprop_register_index(ZFS_PROP_CANMOUNT, "canmount", ZFS_CANMOUNT_ON,
2008-11-20 23:01:55 +03:00
PROP_DEFAULT, ZFS_TYPE_FILESYSTEM, "on | off | noauto",
"CANMOUNT", canmount_table);
/* readonly index (boolean) properties */
zprop_register_index(ZFS_PROP_MOUNTED, "mounted", 0, PROP_READONLY,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "yes | no", "MOUNTED", boolean_table);
zprop_register_index(ZFS_PROP_DEFER_DESTROY, "defer_destroy", 0,
2009-08-18 22:43:27 +04:00
PROP_READONLY, ZFS_TYPE_SNAPSHOT, "yes | no", "DEFER_DESTROY",
boolean_table);
2008-11-20 23:01:55 +03:00
/* set once index properties */
zprop_register_index(ZFS_PROP_NORMALIZE, "normalization", 0,
2008-11-20 23:01:55 +03:00
PROP_ONETIME, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT,
"none | formC | formD | formKC | formKD", "NORMALIZATION",
normalize_table);
zprop_register_index(ZFS_PROP_CASE, "casesensitivity",
ZFS_CASE_SENSITIVE, PROP_ONETIME, ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_SNAPSHOT,
2008-11-20 23:01:55 +03:00
"sensitive | insensitive | mixed", "CASE", case_table);
/* set once index (boolean) properties */
zprop_register_index(ZFS_PROP_UTF8ONLY, "utf8only", 0, PROP_ONETIME,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_SNAPSHOT,
"on | off", "UTF8ONLY", boolean_table);
/* string properties */
zprop_register_string(ZFS_PROP_ORIGIN, "origin", NULL, PROP_READONLY,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<snapshot>", "ORIGIN");
zprop_register_string(ZFS_PROP_CLONES, "clones", NULL, PROP_READONLY,
ZFS_TYPE_SNAPSHOT, "<dataset>[,...]", "CLONES");
zprop_register_string(ZFS_PROP_MOUNTPOINT, "mountpoint", "/",
PROP_INHERIT, ZFS_TYPE_FILESYSTEM, "<path> | legacy | none",
"MOUNTPOINT");
zprop_register_string(ZFS_PROP_SHARENFS, "sharenfs", "off",
PROP_INHERIT, ZFS_TYPE_FILESYSTEM, "on | off | share(1M) options",
"SHARENFS");
zprop_register_string(ZFS_PROP_TYPE, "type", NULL, PROP_READONLY,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_DATASET, "filesystem | volume | snapshot", "TYPE");
zprop_register_string(ZFS_PROP_SHARESMB, "sharesmb", "off",
PROP_INHERIT, ZFS_TYPE_FILESYSTEM,
"on | off | sharemgr(1M) options", "SHARESMB");
zprop_register_string(ZFS_PROP_MLSLABEL, "mlslabel",
ZFS_MLSLABEL_DEFAULT, PROP_INHERIT, ZFS_TYPE_DATASET,
"<sensitivity label>", "MLSLABEL");
2008-11-20 23:01:55 +03:00
/* readonly number properties */
zprop_register_number(ZFS_PROP_USED, "used", 0, PROP_READONLY,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_DATASET, "<size>", "USED");
zprop_register_number(ZFS_PROP_AVAILABLE, "available", 0, PROP_READONLY,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<size>", "AVAIL");
zprop_register_number(ZFS_PROP_REFERENCED, "referenced", 0,
PROP_READONLY, ZFS_TYPE_DATASET, "<size>", "REFER");
zprop_register_number(ZFS_PROP_COMPRESSRATIO, "compressratio", 0,
2008-11-20 23:01:55 +03:00
PROP_READONLY, ZFS_TYPE_DATASET,
"<1.00x or higher if compressed>", "RATIO");
zprop_register_number(ZFS_PROP_REFRATIO, "refcompressratio", 0,
PROP_READONLY, ZFS_TYPE_DATASET,
"<1.00x or higher if compressed>", "REFRATIO");
zprop_register_number(ZFS_PROP_VOLBLOCKSIZE, "volblocksize",
ZVOL_DEFAULT_BLOCKSIZE, PROP_ONETIME,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_VOLUME, "512 to 128k, power of 2", "VOLBLOCK");
zprop_register_number(ZFS_PROP_USEDSNAP, "usedbysnapshots", 0,
PROP_READONLY, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<size>",
"USEDSNAP");
zprop_register_number(ZFS_PROP_USEDDS, "usedbydataset", 0,
PROP_READONLY, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<size>",
"USEDDS");
zprop_register_number(ZFS_PROP_USEDCHILD, "usedbychildren", 0,
PROP_READONLY, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<size>",
"USEDCHILD");
zprop_register_number(ZFS_PROP_USEDREFRESERV, "usedbyrefreservation", 0,
PROP_READONLY,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, "<size>", "USEDREFRESERV");
zprop_register_number(ZFS_PROP_USERREFS, "userrefs", 0, PROP_READONLY,
2009-08-18 22:43:27 +04:00
ZFS_TYPE_SNAPSHOT, "<count>", "USERREFS");
zprop_register_number(ZFS_PROP_WRITTEN, "written", 0, PROP_READONLY,
ZFS_TYPE_DATASET, "<size>", "WRITTEN");
2008-11-20 23:01:55 +03:00
/* default number properties */
zprop_register_number(ZFS_PROP_QUOTA, "quota", 0, PROP_DEFAULT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "<size> | none", "QUOTA");
zprop_register_number(ZFS_PROP_RESERVATION, "reservation", 0,
PROP_DEFAULT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"<size> | none", "RESERV");
zprop_register_number(ZFS_PROP_VOLSIZE, "volsize", 0, PROP_DEFAULT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_VOLUME, "<size>", "VOLSIZE");
zprop_register_number(ZFS_PROP_REFQUOTA, "refquota", 0, PROP_DEFAULT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "<size> | none", "REFQUOTA");
zprop_register_number(ZFS_PROP_REFRESERVATION, "refreservation", 0,
2008-11-20 23:01:55 +03:00
PROP_DEFAULT, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME,
"<size> | none", "REFRESERV");
/* inherit number properties */
zprop_register_number(ZFS_PROP_RECORDSIZE, "recordsize",
SPA_MAXBLOCKSIZE, PROP_INHERIT,
2008-11-20 23:01:55 +03:00
ZFS_TYPE_FILESYSTEM, "512 to 128k, power of 2", "RECSIZE");
/* hidden properties */
zprop_register_hidden(ZFS_PROP_CREATETXG, "createtxg", PROP_TYPE_NUMBER,
PROP_READONLY, ZFS_TYPE_DATASET, "CREATETXG");
zprop_register_hidden(ZFS_PROP_NUMCLONES, "numclones", PROP_TYPE_NUMBER,
PROP_READONLY, ZFS_TYPE_SNAPSHOT, "NUMCLONES");
zprop_register_hidden(ZFS_PROP_NAME, "name", PROP_TYPE_STRING,
2008-11-20 23:01:55 +03:00
PROP_READONLY, ZFS_TYPE_DATASET, "NAME");
zprop_register_hidden(ZFS_PROP_ISCSIOPTIONS, "iscsioptions",
PROP_TYPE_STRING, PROP_INHERIT, ZFS_TYPE_VOLUME, "ISCSIOPTIONS");
zprop_register_hidden(ZFS_PROP_STMF_SHAREINFO, "stmf_sbd_lu",
2009-07-03 02:44:48 +04:00
PROP_TYPE_STRING, PROP_INHERIT, ZFS_TYPE_VOLUME,
"STMF_SBD_LU");
zprop_register_hidden(ZFS_PROP_GUID, "guid", PROP_TYPE_NUMBER,
PROP_READONLY, ZFS_TYPE_DATASET, "GUID");
zprop_register_hidden(ZFS_PROP_USERACCOUNTING, "useraccounting",
PROP_TYPE_NUMBER, PROP_READONLY, ZFS_TYPE_DATASET,
"USERACCOUNTING");
zprop_register_hidden(ZFS_PROP_UNIQUE, "unique", PROP_TYPE_NUMBER,
PROP_READONLY, ZFS_TYPE_DATASET, "UNIQUE");
zprop_register_hidden(ZFS_PROP_OBJSETID, "objsetid", PROP_TYPE_NUMBER,
PROP_READONLY, ZFS_TYPE_DATASET, "OBJSETID");
/*
* Property to be removed once libbe is integrated
*/
zprop_register_hidden(ZFS_PROP_PRIVATE, "priv_prop",
PROP_TYPE_NUMBER, PROP_READONLY, ZFS_TYPE_FILESYSTEM,
"PRIV_PROP");
2008-11-20 23:01:55 +03:00
/* oddball properties */
zprop_register_impl(ZFS_PROP_CREATION, "creation", PROP_TYPE_NUMBER, 0,
NULL, PROP_READONLY, ZFS_TYPE_DATASET,
2008-11-20 23:01:55 +03:00
"<date>", "CREATION", B_FALSE, B_TRUE, NULL);
}
boolean_t
zfs_prop_delegatable(zfs_prop_t prop)
{
zprop_desc_t *pd = &zfs_prop_table[prop];
/* The mlslabel property is never delegatable. */
if (prop == ZFS_PROP_MLSLABEL)
return (B_FALSE);
2008-11-20 23:01:55 +03:00
return (pd->pd_attr != PROP_READONLY);
}
/*
* Given a zfs dataset property name, returns the corresponding property ID.
*/
zfs_prop_t
zfs_name_to_prop(const char *propname)
{
return (zprop_name_to_prop(propname, ZFS_TYPE_DATASET));
}
/*
* For user property names, we allow all lowercase alphanumeric characters, plus
* a few useful punctuation characters.
*/
static int
valid_char(char c)
{
return ((c >= 'a' && c <= 'z') ||
(c >= '0' && c <= '9') ||
c == '-' || c == '_' || c == '.' || c == ':');
}
/*
* Returns true if this is a valid user-defined property (one with a ':').
*/
boolean_t
zfs_prop_user(const char *name)
{
int i;
char c;
boolean_t foundsep = B_FALSE;
for (i = 0; i < strlen(name); i++) {
c = name[i];
if (!valid_char(c))
return (B_FALSE);
if (c == ':')
foundsep = B_TRUE;
}
if (!foundsep)
return (B_FALSE);
return (B_TRUE);
}
2009-07-03 02:44:48 +04:00
/*
* Returns true if this is a valid userspace-type property (one with a '@').
* Note that after the @, any character is valid (eg, another @, for SID
* user@domain).
*/
boolean_t
zfs_prop_userquota(const char *name)
{
zfs_userquota_prop_t prop;
for (prop = 0; prop < ZFS_NUM_USERQUOTA_PROPS; prop++) {
if (strncmp(name, zfs_userquota_prop_prefixes[prop],
strlen(zfs_userquota_prop_prefixes[prop])) == 0) {
return (B_TRUE);
}
}
return (B_FALSE);
}
/*
* Returns true if this is a valid written@ property.
* Note that after the @, any character is valid (eg, another @, for
* written@pool/fs@origin).
*/
boolean_t
zfs_prop_written(const char *name)
{
static const char *prefix = "written@";
return (strncmp(name, prefix, strlen(prefix)) == 0);
}
2008-11-20 23:01:55 +03:00
/*
* Tables of index types, plus functions to convert between the user view
* (strings) and internal representation (uint64_t).
*/
int
zfs_prop_string_to_index(zfs_prop_t prop, const char *string, uint64_t *index)
{
return (zprop_string_to_index(prop, string, index, ZFS_TYPE_DATASET));
}
int
zfs_prop_index_to_string(zfs_prop_t prop, uint64_t index, const char **string)
{
return (zprop_index_to_string(prop, index, string, ZFS_TYPE_DATASET));
}
uint64_t
zfs_prop_random_value(zfs_prop_t prop, uint64_t seed)
{
return (zprop_random_value(prop, seed, ZFS_TYPE_DATASET));
}
2008-11-20 23:01:55 +03:00
/*
* Returns TRUE if the property applies to any of the given dataset types.
*/
boolean_t
2008-11-20 23:01:55 +03:00
zfs_prop_valid_for_type(int prop, zfs_type_t types)
{
return (zprop_valid_for_type(prop, types));
}
zprop_type_t
zfs_prop_get_type(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_proptype);
}
/*
* Returns TRUE if the property is readonly.
*/
boolean_t
zfs_prop_readonly(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_attr == PROP_READONLY ||
zfs_prop_table[prop].pd_attr == PROP_ONETIME);
}
/*
* Returns TRUE if the property is only allowed to be set once.
*/
boolean_t
zfs_prop_setonce(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_attr == PROP_ONETIME);
}
const char *
zfs_prop_default_string(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_strdefault);
}
uint64_t
zfs_prop_default_numeric(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_numdefault);
}
/*
* Given a dataset property ID, returns the corresponding name.
* Assuming the zfs dataset property ID is valid.
*/
const char *
zfs_prop_to_name(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_name);
}
/*
* Returns TRUE if the property is inheritable.
*/
boolean_t
zfs_prop_inheritable(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_attr == PROP_INHERIT ||
zfs_prop_table[prop].pd_attr == PROP_ONETIME);
}
#ifndef _KERNEL
/*
* Returns a string describing the set of acceptable values for the given
* zfs property, or NULL if it cannot be set.
*/
const char *
zfs_prop_values(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_values);
}
/*
* Returns TRUE if this property is a string type. Note that index types
* (compression, checksum) are treated as strings in userland, even though they
* are stored numerically on disk.
*/
int
zfs_prop_is_string(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_proptype == PROP_TYPE_STRING ||
zfs_prop_table[prop].pd_proptype == PROP_TYPE_INDEX);
}
/*
* Returns the column header for the given property. Used only in
* 'zfs list -o', but centralized here with the other property information.
*/
const char *
zfs_prop_column_name(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_colname);
}
/*
* Returns whether the given property should be displayed right-justified for
* 'zfs list'.
*/
boolean_t
zfs_prop_align_right(zfs_prop_t prop)
{
return (zfs_prop_table[prop].pd_rightalign);
}
#endif
#if defined(_KERNEL) && defined(HAVE_SPL)
static int zcommon_init(void) { return 0; }
static int zcommon_fini(void) { return 0; }
spl_module_init(zcommon_init);
spl_module_exit(zcommon_fini);
MODULE_DESCRIPTION("Generic ZFS support");
MODULE_AUTHOR(ZFS_META_AUTHOR);
MODULE_LICENSE(ZFS_META_LICENSE);
/* zfs dataset property functions */
EXPORT_SYMBOL(zfs_userquota_prop_prefixes);
EXPORT_SYMBOL(zfs_prop_init);
EXPORT_SYMBOL(zfs_prop_get_type);
EXPORT_SYMBOL(zfs_prop_get_table);
EXPORT_SYMBOL(zfs_prop_delegatable);
/* Dataset property functions shared between libzfs and kernel. */
EXPORT_SYMBOL(zfs_prop_default_string);
EXPORT_SYMBOL(zfs_prop_default_numeric);
EXPORT_SYMBOL(zfs_prop_readonly);
EXPORT_SYMBOL(zfs_prop_inheritable);
EXPORT_SYMBOL(zfs_prop_setonce);
EXPORT_SYMBOL(zfs_prop_to_name);
EXPORT_SYMBOL(zfs_name_to_prop);
EXPORT_SYMBOL(zfs_prop_user);
EXPORT_SYMBOL(zfs_prop_userquota);
EXPORT_SYMBOL(zfs_prop_index_to_string);
EXPORT_SYMBOL(zfs_prop_string_to_index);
EXPORT_SYMBOL(zfs_prop_valid_for_type);
#endif