mirror_zfs/include/sys/dsl_scan.h

222 lines
8.3 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
* Copyright (c) 2012, 2017 by Delphix. All rights reserved.
* Copyright (c) 2017, 2019, Datto Inc. All rights reserved.
*/
#ifndef _SYS_DSL_SCAN_H
#define _SYS_DSL_SCAN_H
#include <sys/zfs_context.h>
#include <sys/zio.h>
#include <sys/zap.h>
#include <sys/ddt.h>
#include <sys/bplist.h>
#ifdef __cplusplus
extern "C" {
#endif
struct objset;
struct dsl_dir;
struct dsl_dataset;
struct dsl_pool;
struct dmu_tx;
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 21:05:50 +03:00
extern int zfs_scan_suspend_progress;
/*
* All members of this structure must be uint64_t, for byteswap
* purposes.
*/
typedef struct dsl_scan_phys {
uint64_t scn_func; /* pool_scan_func_t */
uint64_t scn_state; /* dsl_scan_state_t */
uint64_t scn_queue_obj;
uint64_t scn_min_txg;
uint64_t scn_max_txg;
uint64_t scn_cur_min_txg;
uint64_t scn_cur_max_txg;
uint64_t scn_start_time;
uint64_t scn_end_time;
uint64_t scn_to_examine; /* total bytes to be scanned */
uint64_t scn_examined; /* bytes scanned so far */
uint64_t scn_skipped; /* bytes skipped by scanner */
uint64_t scn_processed;
uint64_t scn_errors; /* scan I/O error count */
uint64_t scn_ddt_class_max;
ddt_bookmark_t scn_ddt_bookmark;
zbookmark_phys_t scn_bookmark;
uint64_t scn_flags; /* dsl_scan_flags_t */
} dsl_scan_phys_t;
#define SCAN_PHYS_NUMINTS (sizeof (dsl_scan_phys_t) / sizeof (uint64_t))
typedef enum dsl_scan_flags {
DSF_VISIT_DS_AGAIN = 1<<0,
DSF_SCRUB_PAUSED = 1<<1,
} dsl_scan_flags_t;
Add erratum for issue #2094 ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: https://github.com/zfsonlinux/zfs/issues/2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata #2 on a pool unless errata #1 is also present. It expected this will not be a significant problem because pools impacted by errata #2 have a high probably of being impacted by errata #1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <tim@chase2k.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2094
2014-02-21 08:28:33 +04:00
#define DSL_SCAN_FLAGS_MASK (DSF_VISIT_DS_AGAIN)
typedef struct dsl_errorscrub_phys {
uint64_t dep_func; /* pool_scan_func_t */
uint64_t dep_state; /* dsl_scan_state_t */
uint64_t dep_cursor; /* serialized zap cursor for tracing progress */
uint64_t dep_start_time; /* error scrub start time, unix timestamp */
uint64_t dep_end_time; /* error scrub end time, unix timestamp */
uint64_t dep_to_examine; /* total error blocks to be scrubbed */
uint64_t dep_examined; /* blocks scrubbed so far */
uint64_t dep_errors; /* error scrub I/O error count */
uint64_t dep_paused_flags; /* flag for paused */
} dsl_errorscrub_phys_t;
#define ERRORSCRUB_PHYS_NUMINTS (sizeof (dsl_errorscrub_phys_t) \
/ sizeof (uint64_t))
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
/*
* Every pool will have one dsl_scan_t and this structure will contain
* in-memory information about the scan and a pointer to the on-disk
* representation (i.e. dsl_scan_phys_t). Most of the state of the scan
* is contained on-disk to allow the scan to resume in the event of a reboot
* or panic. This structure maintains information about the behavior of a
* running scan, some caching information, and how it should traverse the pool.
*
* The following members of this structure direct the behavior of the scan:
*
* scn_suspending - a scan that cannot be completed in a single txg or
* has exceeded its allotted time will need to suspend.
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
* When this flag is set the scanner will stop traversing
* the pool and write out the current state to disk.
*
* scn_restart_txg - directs the scanner to either restart or start a
* a scan at the specified txg value.
*
* scn_done_txg - when a scan completes its traversal it will set
* the completion txg to the next txg. This is necessary
* to ensure that any blocks that were freed during
* the scan but have not yet been processed (i.e deferred
* frees) are accounted for.
*
* This structure also maintains information about deferred frees which are
* a special kind of traversal. Deferred free can exist in either a bptree or
* a bpobj structure. The scn_is_bptree flag will indicate the type of
* deferred free that is in progress. If the deferred free is part of an
* asynchronous destroy then the scn_async_destroying flag will be set.
*/
typedef struct dsl_scan {
struct dsl_pool *scn_dp;
uint64_t scn_restart_txg;
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
uint64_t scn_done_txg;
uint64_t scn_sync_start_time;
uint64_t scn_issued_before_pass;
/* for freeing blocks */
boolean_t scn_is_bptree;
boolean_t scn_async_destroying;
boolean_t scn_async_stalled;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
uint64_t scn_async_block_min_time_ms;
/* flags and stats for controlling scan state */
boolean_t scn_is_sorted; /* doing sequential scan */
boolean_t scn_clearing; /* scan is issuing sequential extents */
boolean_t scn_checkpointing; /* scan is issuing all queued extents */
boolean_t scn_suspending; /* scan is suspending until next txg */
uint64_t scn_last_checkpoint; /* time of last checkpoint */
/* members for thread synchronization */
zio_t *scn_zio_root; /* root zio for waiting on IO */
taskq_t *scn_taskq; /* task queue for issuing extents */
/* for controlling scan prefetch, protected by spa_scrub_lock */
boolean_t scn_prefetch_stop; /* prefetch should stop */
zbookmark_phys_t scn_prefetch_bookmark; /* prefetch start bookmark */
avl_tree_t scn_prefetch_queue; /* priority queue of prefetch IOs */
uint64_t scn_maxinflight_bytes; /* max bytes in flight for pool */
/* per txg statistics */
uint64_t scn_visited_this_txg; /* total bps visited this txg */
uint64_t scn_dedup_frees_this_txg; /* dedup bps freed this txg */
uint64_t scn_holes_this_txg;
uint64_t scn_lt_min_this_txg;
uint64_t scn_gt_max_this_txg;
uint64_t scn_ddt_contained_this_txg;
uint64_t scn_objsets_visited_this_txg;
uint64_t scn_avg_seg_size_this_txg;
uint64_t scn_segs_this_txg;
uint64_t scn_avg_zio_size_this_txg;
uint64_t scn_zios_this_txg;
/* zap cursor for tracing error scrub progress */
zap_cursor_t errorscrub_cursor;
/* members needed for syncing scan status to disk */
dsl_scan_phys_t scn_phys; /* on disk representation of scan */
dsl_scan_phys_t scn_phys_cached;
avl_tree_t scn_queue; /* queue of datasets to scan */
kmutex_t scn_queue_lock; /* serializes scn_queue inserts */
Several sorted scrub optimizations - Reduce size and comparison complexity of q_exts_by_size B-tree. Previous code used two 64-bit divisions and many other operations to compare two B-tree elements. It created enormous overhead. This implementation moves the math to the upper level and stores the score in the B-tree elements themselves. Since all that we need to store in that B-tree is the extent score and offset, those can fit into single 8 byte value instead of 24 bytes of q_exts_by_addr element and can be compared with single operation. - Better decouple secondary tree logic from main range_tree by moving rt_btree_ops and related functions into dsl_scan.c as ext_size_ops. Those functions are very small to worry about the code duplication and range_tree does not need to know details such as rt_btree_compare. - Instead of accounting number of pending bytes per pool, that needs atomic on global variable per block, account the number of non-empty per-vdev queues, that change much more rarely. - When extent scan is interrupted by TXG end, continue it in the next TXG instead of selecting next best extent. It allows to avoid leaving one truncated (and so likely not the best any more) extent each TXG. On top of some other optimizations this saves about 1.5 minutes out of 10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <caputit1@tcnj.edu> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13576
2022-06-24 19:50:37 +03:00
uint64_t scn_queues_pending; /* outstanding data to issue */
/* members needed for syncing error scrub status to disk */
dsl_errorscrub_phys_t errorscrub_phys;
} dsl_scan_t;
typedef struct dsl_scan_io_queue dsl_scan_io_queue_t;
void scan_init(void);
void scan_fini(void);
int dsl_scan_init(struct dsl_pool *dp, uint64_t txg);
int dsl_scan_setup_check(void *, dmu_tx_t *);
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
void dsl_scan_setup_sync(void *, dmu_tx_t *);
void dsl_scan_fini(struct dsl_pool *dp);
void dsl_scan_sync(struct dsl_pool *, dmu_tx_t *);
int dsl_scan_cancel(struct dsl_pool *);
int dsl_scan(struct dsl_pool *, pool_scan_func_t);
void dsl_scan_assess_vdev(struct dsl_pool *dp, vdev_t *vd);
boolean_t dsl_scan_scrubbing(const struct dsl_pool *dp);
boolean_t dsl_errorscrubbing(const struct dsl_pool *dp);
boolean_t dsl_errorscrub_active(dsl_scan_t *scn);
void dsl_scan_restart_resilver(struct dsl_pool *, uint64_t txg);
int dsl_scrub_set_pause_resume(const struct dsl_pool *dp,
pool_scrub_cmd_t cmd);
void dsl_errorscrub_sync(struct dsl_pool *, dmu_tx_t *);
boolean_t dsl_scan_resilvering(struct dsl_pool *dp);
boolean_t dsl_scan_resilver_scheduled(struct dsl_pool *dp);
boolean_t dsl_dataset_unstable(struct dsl_dataset *ds);
void dsl_scan_ddt_entry(dsl_scan_t *scn, enum zio_checksum checksum,
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
ddt_t *ddt, ddt_lightweight_entry_t *ddlwe, dmu_tx_t *tx);
void dsl_scan_ds_destroyed(struct dsl_dataset *ds, struct dmu_tx *tx);
void dsl_scan_ds_snapshotted(struct dsl_dataset *ds, struct dmu_tx *tx);
void dsl_scan_ds_clone_swapped(struct dsl_dataset *ds1, struct dsl_dataset *ds2,
struct dmu_tx *tx);
boolean_t dsl_scan_active(dsl_scan_t *scn);
boolean_t dsl_scan_is_paused_scrub(const dsl_scan_t *scn);
boolean_t dsl_errorscrub_is_paused(const dsl_scan_t *scn);
void dsl_scan_freed(spa_t *spa, const blkptr_t *bp);
void dsl_scan_io_queue_destroy(dsl_scan_io_queue_t *queue);
void dsl_scan_io_queue_vdev_xfer(vdev_t *svd, vdev_t *tvd);
#ifdef __cplusplus
}
#endif
#endif /* _SYS_DSL_SCAN_H */