c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 18:11:00 +03:00
Code Issues Packages Projects Releases Wiki Activity
10271af05c
mirror_zfs/contrib/pyzfs/setup.py.in

61 lines
1.8 KiB
Python
Raw Normal View History

Adopt pyzfs from ClusterHQ This commit introduces several changes: * Update LICENSE and project information * Give a good PEP8 talk to existing Python source code * Add RPM/DEB packaging for pyzfs * Fix some outstanding issues with the existing pyzfs code caused by changes in the ABI since the last time the code was updated * Integrate pyzfs Python unittest with the ZFS Test Suite * Add missing libzfs_core functions: lzc_change_key, lzc_channel_program, lzc_channel_program_nosync, lzc_load_key, lzc_receive_one, lzc_receive_resumable, lzc_receive_with_cmdprops, lzc_receive_with_header, lzc_reopen, lzc_send_resume, lzc_sync, lzc_unload_key, lzc_remap Note: this commit slightly changes zfs_ioc_unload_key() ABI. This allow to differentiate the case where we tried to unload a key on a non-existing dataset (ENOENT) from the situation where a dataset has no key loaded: this is consistent with the "change" case where trying to zfs_ioc_change_key() from a dataset with no key results in EACCES. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #7230
2018-03-18 11:34:45 +03:00
#
# Copyright 2015 ClusterHQ
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
pyzfs: python3 support (library 1/2) These changes are efficient and valid in python 2 and 3. For the most part, they are also pythonic. * 2to3 conversion * add __future__ imports * iterator changes * integer division * relative import fixes Reviewed-by: John Ramsden <johnramsden@riseup.net> Reviewed-by: Neal Gompa <ngompa@datto.com> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com> Closes #8096
2018-08-22 13:59:51 +03:00
from __future__ import absolute_import, division, print_function
Import pyzfs source code from ClusterHQ libzfs_core is intended to be a stable interface for programmatic administration of ZFS. This wrapper provides one-to-one wrappers for libzfs_core API functions, but the signatures and types are more natural to Python. nvlists are wrapped as dictionaries or lists depending on their usage. Some parameters have default values depending on typical use for increased convenience. Enumerations and bit flags become strings and lists of strings in Python. Errors are reported as exceptions rather than integer errno-style error codes. The wrapper takes care to provide one-to-many mapping of the error codes to the exceptions by interpreting a context in which the error code is produced. Unit tests and automated test for the libzfs_core API are provided with this package. Please note that the API tests perform lots of ZFS dataset level operations and ZFS tries hard to ensure that any modifications do reach stable storage. That means that the operations are done synchronously and that, for example, disk caches are flushed. Thus, the tests can be very slow on real hardware. It is recommended to place the default temporary directory or a temporary directory specified by, for instance, TMP environment variable on a memory backed filesystem. Original-patch-by: Andriy Gapon <avg@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #7230
2018-03-03 13:10:34 +03:00
from setuptools import setup, find_packages
setup(
name="pyzfs",
Use ZFS version for pyzfs & drop unused reqs file Now that 'pyzfs' is part of the ZFS codebase, it should be versioned the same as the rest of the source tree. This eliminates confusion on what version of the bindings are being used, especially for dependent Python projects that may use the Python dist metadata to identify compatible versions of pyzfs to work from. In addition, a trivial change to drop the unused requirements.txt file is included, simply because it's unused and a leftover from before it was imported into the ZFS codebase and wired into the autotools build scripts. Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Neal Gompa <ngompa@datto.com> Closes #8243
2019-01-09 02:56:42 +03:00
version="@VERSION@",
Import pyzfs source code from ClusterHQ libzfs_core is intended to be a stable interface for programmatic administration of ZFS. This wrapper provides one-to-one wrappers for libzfs_core API functions, but the signatures and types are more natural to Python. nvlists are wrapped as dictionaries or lists depending on their usage. Some parameters have default values depending on typical use for increased convenience. Enumerations and bit flags become strings and lists of strings in Python. Errors are reported as exceptions rather than integer errno-style error codes. The wrapper takes care to provide one-to-many mapping of the error codes to the exceptions by interpreting a context in which the error code is produced. Unit tests and automated test for the libzfs_core API are provided with this package. Please note that the API tests perform lots of ZFS dataset level operations and ZFS tries hard to ensure that any modifications do reach stable storage. That means that the operations are done synchronously and that, for example, disk caches are flushed. Thus, the tests can be very slow on real hardware. It is recommended to place the default temporary directory or a temporary directory specified by, for instance, TMP environment variable on a memory backed filesystem. Original-patch-by: Andriy Gapon <avg@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #7230
2018-03-03 13:10:34 +03:00
description="Wrapper for libzfs_core",
author="ClusterHQ",
author_email="support@clusterhq.com",
url="http://pyzfs.readthedocs.org",
license="Apache License, Version 2.0",
classifiers=[
"Development Status :: 4 - Beta",
"Intended Audience :: Developers",
"License :: OSI Approved :: Apache Software License",
pyzfs: python3 support (build system) Almost all of the Python code in the respository has been updated to be compatibile with Python 2.6, Python 3.4, or newer. The only exceptions are arc_summery3.py which requires Python 3, and pyzfs which requires at least Python 2.7. This allows us to maintain a single version of the code and support most default versions of python. This change does the following: * Sets the default shebang for all Python scripts to python3. If only Python 2 is available, then at install time scripts which are compatible with Python 2 will have their shebangs replaced with /usr/bin/python. This is done for compatibility until Python 2 goes end of life. Since only the installed versions are changed this means Python 3 must be installed on the system for test-runner when testing in-tree. * Added --with-python=<2|3|3.4,etc> configure option which sets the PYTHON environment variable to target a specific python version. By default the newest installed version of Python will be used or the preferred distribution version when creating pacakges. * Fixed --enable-pyzfs configure checks so they are run when --enable-pyzfs=check and --enable-pyzfs=yes. * Enabled pyzfs for Python 3.4 and newer, which is now supported. * Renamed pyzfs package to python<VERSION>-pyzfs and updated to install in the appropriate site location. For example, when building with --with-python=3.4 a python34-pyzfs will be created which installs in /usr/lib/python3.4/site-packages/. * Renamed the following python scripts according to the Fedora guidance for packaging utilities in /bin - dbufstat.py -> dbufstat - arcstat.py -> arcstat - arc_summary.py -> arc_summary - arc_summary3.py -> arc_summary3 * Updated python-cffi package name. On CentOS 6, CentOS 7, and Amazon Linux it's called python-cffi, not python2-cffi. For Python3 it's called python3-cffi or python3x-cffi. * Install one version of arc_summary. Depending on the version of Python available install either arc_summary2 or arc_summary3 as arc_summary. The user output is only slightly different. Reviewed-by: John Ramsden <johnramsden@riseup.net> Reviewed-by: Neal Gompa <ngompa@datto.com> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8096
2018-10-31 19:22:59 +03:00
"Programming Language :: Python :: 3",
"Programming Language :: Python :: 3.6",
"Programming Language :: Python :: 3.7",
Removed Python 2 and Python 3.5- support Deprecation of Python versions below 3.6 gives opportunity to unify the build and install requirements for OpenZFS packages. The minimal supported Python version is 3.6 as this is the most recent Python package CentOS/RHEL 7 users can get. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rich Ercolani <rincebrain@gmail.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #12925
2022-01-13 19:51:12 +03:00
"Programming Language :: Python :: 3.8",
"Programming Language :: Python :: 3.9",
"Programming Language :: Python :: 3.10",
Import pyzfs source code from ClusterHQ libzfs_core is intended to be a stable interface for programmatic administration of ZFS. This wrapper provides one-to-one wrappers for libzfs_core API functions, but the signatures and types are more natural to Python. nvlists are wrapped as dictionaries or lists depending on their usage. Some parameters have default values depending on typical use for increased convenience. Enumerations and bit flags become strings and lists of strings in Python. Errors are reported as exceptions rather than integer errno-style error codes. The wrapper takes care to provide one-to-many mapping of the error codes to the exceptions by interpreting a context in which the error code is produced. Unit tests and automated test for the libzfs_core API are provided with this package. Please note that the API tests perform lots of ZFS dataset level operations and ZFS tries hard to ensure that any modifications do reach stable storage. That means that the operations are done synchronously and that, for example, disk caches are flushed. Thus, the tests can be very slow on real hardware. It is recommended to place the default temporary directory or a temporary directory specified by, for instance, TMP environment variable on a memory backed filesystem. Original-patch-by: Andriy Gapon <avg@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #7230
2018-03-03 13:10:34 +03:00
"Topic :: System :: Filesystems",
"Topic :: Software Development :: Libraries",
],
keywords=[
"ZFS",
"OpenZFS",
"libzfs_core",
],
packages=find_packages(),
include_package_data=True,
install_requires=[
"cffi",
],
setup_requires=[
"cffi",
],
Removed Python 2 and Python 3.5- support Deprecation of Python versions below 3.6 gives opportunity to unify the build and install requirements for OpenZFS packages. The minimal supported Python version is 3.6 as this is the most recent Python package CentOS/RHEL 7 users can get. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rich Ercolani <rincebrain@gmail.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #12925
2022-01-13 19:51:12 +03:00
python_requires='>=3.6,<4',
Import pyzfs source code from ClusterHQ libzfs_core is intended to be a stable interface for programmatic administration of ZFS. This wrapper provides one-to-one wrappers for libzfs_core API functions, but the signatures and types are more natural to Python. nvlists are wrapped as dictionaries or lists depending on their usage. Some parameters have default values depending on typical use for increased convenience. Enumerations and bit flags become strings and lists of strings in Python. Errors are reported as exceptions rather than integer errno-style error codes. The wrapper takes care to provide one-to-many mapping of the error codes to the exceptions by interpreting a context in which the error code is produced. Unit tests and automated test for the libzfs_core API are provided with this package. Please note that the API tests perform lots of ZFS dataset level operations and ZFS tries hard to ensure that any modifications do reach stable storage. That means that the operations are done synchronously and that, for example, disk caches are flushed. Thus, the tests can be very slow on real hardware. It is recommended to place the default temporary directory or a temporary directory specified by, for instance, TMP environment variable on a memory backed filesystem. Original-patch-by: Andriy Gapon <avg@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #7230
2018-03-03 13:10:34 +03:00
zip_safe=False,
test_suite="libzfs_core.test",
)
# vim: softtabstop=4 tabstop=4 expandtab shiftwidth=4
Reference in New Issue Copy Permalink