mirror_zfs/cmd/zfs/zfs_main.c

8825 lines
216 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
2008-11-20 23:01:55 +03:00
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2020 by Delphix. All rights reserved.
* Copyright 2012 Milan Jurik. All rights reserved.
* Copyright (c) 2012, Joyent, Inc. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
* Copyright 2016 Igor Kozhukhov <ikozhukhov@gmail.com>.
* Copyright 2016 Nexenta Systems, Inc.
* Copyright (c) 2019 Datto Inc.
* Copyright (c) 2019, loli10K <ezomori.nozomu@gmail.com>
* Copyright 2019 Joyent, Inc.
* Copyright (c) 2019, 2020 by Christian Schwarz. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
#include <assert.h>
#include <ctype.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
#include <sys/debug.h>
2008-11-20 23:01:55 +03:00
#include <errno.h>
#include <getopt.h>
2008-11-20 23:01:55 +03:00
#include <libgen.h>
#include <libintl.h>
#include <libuutil.h>
#include <libnvpair.h>
#include <locale.h>
#include <stddef.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
2008-11-20 23:01:55 +03:00
#include <unistd.h>
#include <fcntl.h>
#include <zone.h>
2009-07-03 02:44:48 +04:00
#include <grp.h>
#include <pwd.h>
#include <umem.h>
#include <pthread.h>
#include <signal.h>
#include <sys/list.h>
2008-11-20 23:01:55 +03:00
#include <sys/mkdev.h>
#include <sys/mntent.h>
#include <sys/mnttab.h>
#include <sys/mount.h>
#include <sys/stat.h>
2009-07-03 02:44:48 +04:00
#include <sys/fs/zfs.h>
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-10 01:31:08 +03:00
#include <sys/systeminfo.h>
#include <sys/types.h>
#include <time.h>
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
#include <sys/zfs_project.h>
2008-11-20 23:01:55 +03:00
#include <libzfs.h>
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
#include <libzfs_core.h>
#include <zfs_prop.h>
#include <zfs_deleg.h>
#include <libzutil.h>
#ifdef HAVE_IDMAP
#include <aclutils.h>
#include <directory.h>
#endif /* HAVE_IDMAP */
2008-11-20 23:01:55 +03:00
#include "zfs_iter.h"
#include "zfs_util.h"
#include "zfs_comutil.h"
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
#include "zfs_projectutil.h"
2008-11-20 23:01:55 +03:00
libzfs_handle_t *g_zfs;
static char history_str[HIS_MAX_RECORD_LEN];
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
static boolean_t log_history = B_TRUE;
2008-11-20 23:01:55 +03:00
static int zfs_do_clone(int argc, char **argv);
static int zfs_do_create(int argc, char **argv);
static int zfs_do_destroy(int argc, char **argv);
static int zfs_do_get(int argc, char **argv);
static int zfs_do_inherit(int argc, char **argv);
static int zfs_do_list(int argc, char **argv);
static int zfs_do_mount(int argc, char **argv);
static int zfs_do_rename(int argc, char **argv);
static int zfs_do_rollback(int argc, char **argv);
static int zfs_do_set(int argc, char **argv);
static int zfs_do_upgrade(int argc, char **argv);
static int zfs_do_snapshot(int argc, char **argv);
static int zfs_do_unmount(int argc, char **argv);
static int zfs_do_share(int argc, char **argv);
static int zfs_do_unshare(int argc, char **argv);
static int zfs_do_send(int argc, char **argv);
static int zfs_do_receive(int argc, char **argv);
static int zfs_do_promote(int argc, char **argv);
2009-07-03 02:44:48 +04:00
static int zfs_do_userspace(int argc, char **argv);
static int zfs_do_allow(int argc, char **argv);
static int zfs_do_unallow(int argc, char **argv);
2009-08-18 22:43:27 +04:00
static int zfs_do_hold(int argc, char **argv);
static int zfs_do_holds(int argc, char **argv);
2009-08-18 22:43:27 +04:00
static int zfs_do_release(int argc, char **argv);
static int zfs_do_diff(int argc, char **argv);
static int zfs_do_bookmark(int argc, char **argv);
static int zfs_do_channel_program(int argc, char **argv);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
static int zfs_do_load_key(int argc, char **argv);
static int zfs_do_unload_key(int argc, char **argv);
static int zfs_do_change_key(int argc, char **argv);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
static int zfs_do_project(int argc, char **argv);
static int zfs_do_version(int argc, char **argv);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static int zfs_do_redact(int argc, char **argv);
static int zfs_do_wait(int argc, char **argv);
2008-11-20 23:01:55 +03:00
#ifdef __FreeBSD__
static int zfs_do_jail(int argc, char **argv);
static int zfs_do_unjail(int argc, char **argv);
#endif
#ifdef __linux__
static int zfs_do_zone(int argc, char **argv);
static int zfs_do_unzone(int argc, char **argv);
#endif
2008-11-20 23:01:55 +03:00
/*
* Enable a reasonable set of defaults for libumem debugging on DEBUG builds.
2008-11-20 23:01:55 +03:00
*/
#ifdef DEBUG
2008-11-20 23:01:55 +03:00
const char *
_umem_debug_init(void)
{
return ("default,verbose"); /* $UMEM_DEBUG setting */
}
const char *
_umem_logging_init(void)
{
return ("fail,contents"); /* $UMEM_LOGGING setting */
}
#endif
2008-11-20 23:01:55 +03:00
typedef enum {
HELP_CLONE,
HELP_CREATE,
HELP_DESTROY,
HELP_GET,
HELP_INHERIT,
HELP_UPGRADE,
HELP_LIST,
HELP_MOUNT,
HELP_PROMOTE,
HELP_RECEIVE,
HELP_RENAME,
HELP_ROLLBACK,
HELP_SEND,
HELP_SET,
HELP_SHARE,
HELP_SNAPSHOT,
HELP_UNMOUNT,
HELP_UNSHARE,
HELP_ALLOW,
2009-07-03 02:44:48 +04:00
HELP_UNALLOW,
HELP_USERSPACE,
2009-08-18 22:43:27 +04:00
HELP_GROUPSPACE,
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
HELP_PROJECTSPACE,
HELP_PROJECT,
2009-08-18 22:43:27 +04:00
HELP_HOLD,
HELP_HOLDS,
HELP_RELEASE,
HELP_DIFF,
HELP_BOOKMARK,
HELP_CHANNEL_PROGRAM,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
HELP_LOAD_KEY,
HELP_UNLOAD_KEY,
HELP_CHANGE_KEY,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
HELP_VERSION,
HELP_REDACT,
HELP_JAIL,
HELP_UNJAIL,
HELP_WAIT,
HELP_ZONE,
HELP_UNZONE,
2008-11-20 23:01:55 +03:00
} zfs_help_t;
typedef struct zfs_command {
const char *name;
int (*func)(int argc, char **argv);
zfs_help_t usage;
} zfs_command_t;
/*
* Master command table. Each ZFS command has a name, associated function, and
* usage message. The usage messages need to be internationalized, so we have
* to have a function to return the usage message based on a command index.
*
* These commands are organized according to how they are displayed in the usage
* message. An empty command (one with a NULL name) indicates an empty line in
* the generic usage message.
*/
static zfs_command_t command_table[] = {
{ "version", zfs_do_version, HELP_VERSION },
{ NULL },
2008-11-20 23:01:55 +03:00
{ "create", zfs_do_create, HELP_CREATE },
{ "destroy", zfs_do_destroy, HELP_DESTROY },
{ NULL },
{ "snapshot", zfs_do_snapshot, HELP_SNAPSHOT },
{ "rollback", zfs_do_rollback, HELP_ROLLBACK },
{ "clone", zfs_do_clone, HELP_CLONE },
{ "promote", zfs_do_promote, HELP_PROMOTE },
{ "rename", zfs_do_rename, HELP_RENAME },
{ "bookmark", zfs_do_bookmark, HELP_BOOKMARK },
{ "program", zfs_do_channel_program, HELP_CHANNEL_PROGRAM },
2008-11-20 23:01:55 +03:00
{ NULL },
{ "list", zfs_do_list, HELP_LIST },
{ NULL },
{ "set", zfs_do_set, HELP_SET },
{ "get", zfs_do_get, HELP_GET },
2008-11-20 23:01:55 +03:00
{ "inherit", zfs_do_inherit, HELP_INHERIT },
{ "upgrade", zfs_do_upgrade, HELP_UPGRADE },
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
{ NULL },
2009-07-03 02:44:48 +04:00
{ "userspace", zfs_do_userspace, HELP_USERSPACE },
{ "groupspace", zfs_do_userspace, HELP_GROUPSPACE },
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
{ "projectspace", zfs_do_userspace, HELP_PROJECTSPACE },
{ NULL },
{ "project", zfs_do_project, HELP_PROJECT },
2008-11-20 23:01:55 +03:00
{ NULL },
{ "mount", zfs_do_mount, HELP_MOUNT },
{ "unmount", zfs_do_unmount, HELP_UNMOUNT },
{ "share", zfs_do_share, HELP_SHARE },
{ "unshare", zfs_do_unshare, HELP_UNSHARE },
{ NULL },
{ "send", zfs_do_send, HELP_SEND },
{ "receive", zfs_do_receive, HELP_RECEIVE },
{ NULL },
{ "allow", zfs_do_allow, HELP_ALLOW },
2008-11-20 23:01:55 +03:00
{ NULL },
{ "unallow", zfs_do_unallow, HELP_UNALLOW },
2009-08-18 22:43:27 +04:00
{ NULL },
{ "hold", zfs_do_hold, HELP_HOLD },
{ "holds", zfs_do_holds, HELP_HOLDS },
2009-08-18 22:43:27 +04:00
{ "release", zfs_do_release, HELP_RELEASE },
{ "diff", zfs_do_diff, HELP_DIFF },
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
{ "load-key", zfs_do_load_key, HELP_LOAD_KEY },
{ "unload-key", zfs_do_unload_key, HELP_UNLOAD_KEY },
{ "change-key", zfs_do_change_key, HELP_CHANGE_KEY },
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
{ "redact", zfs_do_redact, HELP_REDACT },
{ "wait", zfs_do_wait, HELP_WAIT },
#ifdef __FreeBSD__
{ "jail", zfs_do_jail, HELP_JAIL },
{ "unjail", zfs_do_unjail, HELP_UNJAIL },
#endif
#ifdef __linux__
{ "zone", zfs_do_zone, HELP_ZONE },
{ "unzone", zfs_do_unzone, HELP_UNZONE },
#endif
2008-11-20 23:01:55 +03:00
};
#define NCOMMAND (sizeof (command_table) / sizeof (command_table[0]))
zfs_command_t *current_command;
static const char *
get_usage(zfs_help_t idx)
{
switch (idx) {
case HELP_CLONE:
return (gettext("\tclone [-p] [-o property=value] ... "
"<snapshot> <filesystem|volume>\n"));
2008-11-20 23:01:55 +03:00
case HELP_CREATE:
return (gettext("\tcreate [-Pnpuv] [-o property=value] ... "
2008-11-20 23:01:55 +03:00
"<filesystem>\n"
"\tcreate [-Pnpsv] [-b blocksize] [-o property=value] ... "
2008-11-20 23:01:55 +03:00
"-V <size> <volume>\n"));
case HELP_DESTROY:
return (gettext("\tdestroy [-fnpRrv] <filesystem|volume>\n"
"\tdestroy [-dnpRrv] "
"<filesystem|volume>@<snap>[%<snap>][,...]\n"
"\tdestroy <filesystem|volume>#<bookmark>\n"));
2008-11-20 23:01:55 +03:00
case HELP_GET:
2009-07-03 02:44:48 +04:00
return (gettext("\tget [-rHp] [-d max] "
"[-o \"all\" | field[,...]]\n"
"\t [-t type[,...]] [-s source[,...]]\n"
2008-11-20 23:01:55 +03:00
"\t <\"all\" | property[,...]> "
"[filesystem|volume|snapshot|bookmark] ...\n"));
2008-11-20 23:01:55 +03:00
case HELP_INHERIT:
return (gettext("\tinherit [-rS] <property> "
"<filesystem|volume|snapshot> ...\n"));
2008-11-20 23:01:55 +03:00
case HELP_UPGRADE:
return (gettext("\tupgrade [-v]\n"
"\tupgrade [-r] [-V version] <-a | filesystem ...>\n"));
case HELP_LIST:
return (gettext("\tlist [-Hp] [-r|-d max] [-o property[,...]] "
"[-s property]...\n\t [-S property]... [-t type[,...]] "
"[filesystem|volume|snapshot] ...\n"));
2008-11-20 23:01:55 +03:00
case HELP_MOUNT:
return (gettext("\tmount\n"
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
"\tmount [-flvO] [-o opts] <-a | filesystem>\n"));
2008-11-20 23:01:55 +03:00
case HELP_PROMOTE:
return (gettext("\tpromote <clone-filesystem>\n"));
case HELP_RECEIVE:
return (gettext("\treceive [-vMnsFhu] "
"[-o <property>=<value>] ... [-x <property>] ...\n"
"\t <filesystem|volume|snapshot>\n"
"\treceive [-vMnsFhu] [-o <property>=<value>] ... "
"[-x <property>] ... \n"
"\t [-d | -e] <filesystem>\n"
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
"\treceive -A <filesystem|volume>\n"));
2008-11-20 23:01:55 +03:00
case HELP_RENAME:
return (gettext("\trename [-f] <filesystem|volume|snapshot> "
2008-11-20 23:01:55 +03:00
"<filesystem|volume|snapshot>\n"
"\trename -p [-f] <filesystem|volume> <filesystem|volume>\n"
"\trename -u [-f] <filesystem> <filesystem>\n"
"\trename -r <snapshot> <snapshot>\n"));
2008-11-20 23:01:55 +03:00
case HELP_ROLLBACK:
return (gettext("\trollback [-rRf] <snapshot>\n"));
case HELP_SEND:
return (gettext("\tsend [-DLPbcehnpsvw] "
"[-i|-I snapshot]\n"
"\t [-R [-X dataset[,dataset]...]] <snapshot>\n"
"\tsend [-DnvPLecw] [-i snapshot|bookmark] "
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
"<filesystem|volume|snapshot>\n"
"\tsend [-DnPpvLec] [-i bookmark|snapshot] "
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
"--redact <bookmark> <snapshot>\n"
"\tsend [-nvPe] -t <receive_resume_token>\n"
"\tsend [-Pnv] --saved filesystem\n"));
2008-11-20 23:01:55 +03:00
case HELP_SET:
return (gettext("\tset <property=value> ... "
"<filesystem|volume|snapshot> ...\n"));
2008-11-20 23:01:55 +03:00
case HELP_SHARE:
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
return (gettext("\tshare [-l] <-a [nfs|smb] | filesystem>\n"));
2008-11-20 23:01:55 +03:00
case HELP_SNAPSHOT:
return (gettext("\tsnapshot [-r] [-o property=value] ... "
"<filesystem|volume>@<snap> ...\n"));
2008-11-20 23:01:55 +03:00
case HELP_UNMOUNT:
return (gettext("\tunmount [-fu] "
2008-11-20 23:01:55 +03:00
"<-a | filesystem|mountpoint>\n"));
case HELP_UNSHARE:
2009-08-18 22:43:27 +04:00
return (gettext("\tunshare "
"<-a [nfs|smb] | filesystem|mountpoint>\n"));
2008-11-20 23:01:55 +03:00
case HELP_ALLOW:
2009-07-03 02:44:48 +04:00
return (gettext("\tallow <filesystem|volume>\n"
"\tallow [-ldug] "
2008-11-20 23:01:55 +03:00
"<\"everyone\"|user|group>[,...] <perm|@setname>[,...]\n"
"\t <filesystem|volume>\n"
"\tallow [-ld] -e <perm|@setname>[,...] "
"<filesystem|volume>\n"
"\tallow -c <perm|@setname>[,...] <filesystem|volume>\n"
"\tallow -s @setname <perm|@setname>[,...] "
"<filesystem|volume>\n"));
case HELP_UNALLOW:
return (gettext("\tunallow [-rldug] "
"<\"everyone\"|user|group>[,...]\n"
"\t [<perm|@setname>[,...]] <filesystem|volume>\n"
"\tunallow [-rld] -e [<perm|@setname>[,...]] "
"<filesystem|volume>\n"
"\tunallow [-r] -c [<perm|@setname>[,...]] "
"<filesystem|volume>\n"
"\tunallow [-r] -s @setname [<perm|@setname>[,...]] "
"<filesystem|volume>\n"));
2009-07-03 02:44:48 +04:00
case HELP_USERSPACE:
return (gettext("\tuserspace [-Hinp] [-o field[,...]] "
"[-s field] ...\n"
"\t [-S field] ... [-t type[,...]] "
"<filesystem|snapshot|path>\n"));
2009-07-03 02:44:48 +04:00
case HELP_GROUPSPACE:
return (gettext("\tgroupspace [-Hinp] [-o field[,...]] "
"[-s field] ...\n"
"\t [-S field] ... [-t type[,...]] "
"<filesystem|snapshot|path>\n"));
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case HELP_PROJECTSPACE:
return (gettext("\tprojectspace [-Hp] [-o field[,...]] "
"[-s field] ... \n"
"\t [-S field] ... <filesystem|snapshot|path>\n"));
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case HELP_PROJECT:
return (gettext("\tproject [-d|-r] <directory|file ...>\n"
"\tproject -c [-0] [-d|-r] [-p id] <directory|file ...>\n"
"\tproject -C [-k] [-r] <directory ...>\n"
"\tproject [-p id] [-r] [-s] <directory ...>\n"));
2009-08-18 22:43:27 +04:00
case HELP_HOLD:
return (gettext("\thold [-r] <tag> <snapshot> ...\n"));
case HELP_HOLDS:
return (gettext("\tholds [-rH] <snapshot> ...\n"));
2009-08-18 22:43:27 +04:00
case HELP_RELEASE:
return (gettext("\trelease [-r] <tag> <snapshot> ...\n"));
case HELP_DIFF:
return (gettext("\tdiff [-FHt] <snapshot> "
"[snapshot|filesystem]\n"));
case HELP_BOOKMARK:
return (gettext("\tbookmark <snapshot|bookmark> "
"<newbookmark>\n"));
case HELP_CHANNEL_PROGRAM:
return (gettext("\tprogram [-jn] [-t <instruction limit>] "
"[-m <memory limit (b)>]\n"
"\t <pool> <program file> [lua args...]\n"));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case HELP_LOAD_KEY:
return (gettext("\tload-key [-rn] [-L <keylocation>] "
"<-a | filesystem|volume>\n"));
case HELP_UNLOAD_KEY:
return (gettext("\tunload-key [-r] "
"<-a | filesystem|volume>\n"));
case HELP_CHANGE_KEY:
Encryption Stability and On-Disk Format Fixes The on-disk format for encrypted datasets protects not only the encrypted and authenticated blocks themselves, but also the order and interpretation of these blocks. In order to make this work while maintaining the ability to do raw sends, the indirect bps maintain a secure checksum of all the MACs in the block below it along with a few other fields that determine how the data is interpreted. Unfortunately, the current on-disk format erroneously includes some fields which are not portable and thus cannot support raw sends. It is not possible to easily work around this issue due to a separate and much smaller bug which causes indirect blocks for encrypted dnodes to not be compressed, which conflicts with the previous bug. In addition, the current code generates incompatible on-disk formats on big endian and little endian systems due to an issue with how block pointers are authenticated. Finally, raw send streams do not currently include dn_maxblkid when sending both the metadnode and normal dnodes which are needed in order to ensure that we are correctly maintaining the portable objset MAC. This patch zero's out the offending fields when computing the bp MAC and ensures that these MACs are always calculated in little endian order (regardless of the host system's byte order). This patch also registers an errata for the old on-disk format, which we detect by adding a "version" field to newly created DSL Crypto Keys. We allow datasets without a version (version 0) to only be mounted for read so that they can easily be migrated. We also now include dn_maxblkid in raw send streams to ensure the MAC can be maintained correctly. This patch also contains minor bug fixes and cleanups. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #6845 Closes #6864 Closes #7052
2017-11-08 22:12:59 +03:00
return (gettext("\tchange-key [-l] [-o keyformat=<value>]\n"
"\t [-o keylocation=<value>] [-o pbkdf2iters=<value>]\n"
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
"\t <filesystem|volume>\n"
"\tchange-key -i [-l] <filesystem|volume>\n"));
case HELP_VERSION:
return (gettext("\tversion\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case HELP_REDACT:
return (gettext("\tredact <snapshot> <bookmark> "
"<redaction_snapshot> ...\n"));
case HELP_JAIL:
return (gettext("\tjail <jailid|jailname> <filesystem>\n"));
case HELP_UNJAIL:
return (gettext("\tunjail <jailid|jailname> <filesystem>\n"));
case HELP_WAIT:
return (gettext("\twait [-t <activity>] <filesystem>\n"));
case HELP_ZONE:
return (gettext("\tzone <nsfile> <filesystem>\n"));
case HELP_UNZONE:
return (gettext("\tunzone <nsfile> <filesystem>\n"));
default:
__builtin_unreachable();
2008-11-20 23:01:55 +03:00
}
}
void
nomem(void)
{
(void) fprintf(stderr, gettext("internal error: out of memory\n"));
exit(1);
}
2008-11-20 23:01:55 +03:00
/*
* Utility function to guarantee malloc() success.
*/
2008-11-20 23:01:55 +03:00
void *
safe_malloc(size_t size)
{
void *data;
if ((data = calloc(1, size)) == NULL)
nomem();
2008-11-20 23:01:55 +03:00
return (data);
}
static void *
safe_realloc(void *data, size_t size)
{
void *newp;
if ((newp = realloc(data, size)) == NULL) {
free(data);
nomem();
}
return (newp);
}
static char *
safe_strdup(const char *str)
{
char *dupstr = strdup(str);
if (dupstr == NULL)
nomem();
return (dupstr);
}
2008-11-20 23:01:55 +03:00
/*
* Callback routine that will print out information for each of
* the properties.
*/
static int
usage_prop_cb(int prop, void *cb)
{
FILE *fp = cb;
(void) fprintf(fp, "\t%-15s ", zfs_prop_to_name(prop));
2008-11-20 23:01:55 +03:00
if (zfs_prop_readonly(prop))
(void) fprintf(fp, " NO ");
2008-11-20 23:01:55 +03:00
else
(void) fprintf(fp, "YES ");
2008-11-20 23:01:55 +03:00
if (zfs_prop_inheritable(prop))
(void) fprintf(fp, " YES ");
else
(void) fprintf(fp, " NO ");
(void) fprintf(fp, "%s\n", zfs_prop_values(prop) ?: "-");
2008-11-20 23:01:55 +03:00
return (ZPROP_CONT);
}
/*
* Display usage message. If we're inside a command, display only the usage for
* that command. Otherwise, iterate over the entire command table and display
* a complete usage message.
*/
static __attribute__((noreturn)) void
2008-11-20 23:01:55 +03:00
usage(boolean_t requested)
{
int i;
boolean_t show_properties = B_FALSE;
FILE *fp = requested ? stdout : stderr;
if (current_command == NULL) {
(void) fprintf(fp, gettext("usage: zfs command args ...\n"));
(void) fprintf(fp,
gettext("where 'command' is one of the following:\n\n"));
for (i = 0; i < NCOMMAND; i++) {
if (command_table[i].name == NULL)
(void) fprintf(fp, "\n");
else
(void) fprintf(fp, "%s",
get_usage(command_table[i].usage));
}
(void) fprintf(fp, gettext("\nEach dataset is of the form: "
"pool/[dataset/]*dataset[@name]\n"));
} else {
(void) fprintf(fp, gettext("usage:\n"));
(void) fprintf(fp, "%s", get_usage(current_command->usage));
}
if (current_command != NULL &&
(strcmp(current_command->name, "set") == 0 ||
strcmp(current_command->name, "get") == 0 ||
strcmp(current_command->name, "inherit") == 0 ||
strcmp(current_command->name, "list") == 0))
show_properties = B_TRUE;
if (show_properties) {
(void) fprintf(fp,
gettext("\nThe following properties are supported:\n"));
(void) fprintf(fp, "\n\t%-14s %s %s %s\n\n",
"PROPERTY", "EDIT", "INHERIT", "VALUES");
/* Iterate over all properties */
(void) zprop_iter(usage_prop_cb, fp, B_FALSE, B_TRUE,
ZFS_TYPE_DATASET);
2009-07-03 02:44:48 +04:00
(void) fprintf(fp, "\t%-15s ", "userused@...");
(void) fprintf(fp, " NO NO <size>\n");
(void) fprintf(fp, "\t%-15s ", "groupused@...");
(void) fprintf(fp, " NO NO <size>\n");
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) fprintf(fp, "\t%-15s ", "projectused@...");
(void) fprintf(fp, " NO NO <size>\n");
(void) fprintf(fp, "\t%-15s ", "userobjused@...");
(void) fprintf(fp, " NO NO <size>\n");
(void) fprintf(fp, "\t%-15s ", "groupobjused@...");
(void) fprintf(fp, " NO NO <size>\n");
(void) fprintf(fp, "\t%-15s ", "projectobjused@...");
(void) fprintf(fp, " NO NO <size>\n");
2009-07-03 02:44:48 +04:00
(void) fprintf(fp, "\t%-15s ", "userquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
(void) fprintf(fp, "\t%-15s ", "groupquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) fprintf(fp, "\t%-15s ", "projectquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
(void) fprintf(fp, "\t%-15s ", "userobjquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
(void) fprintf(fp, "\t%-15s ", "groupobjquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
(void) fprintf(fp, "\t%-15s ", "projectobjquota@...");
(void) fprintf(fp, "YES NO <size> | none\n");
(void) fprintf(fp, "\t%-15s ", "written@<snap>");
(void) fprintf(fp, " NO NO <size>\n");
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) fprintf(fp, "\t%-15s ", "written#<bookmark>");
(void) fprintf(fp, " NO NO <size>\n");
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
(void) fprintf(fp, gettext("\nSizes are specified in bytes "
"with standard units such as K, M, G, etc.\n"));
(void) fprintf(fp, "%s", gettext("\nUser-defined properties "
"can be specified by using a name containing a colon "
"(:).\n"));
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) fprintf(fp, gettext("\nThe {user|group|project}"
"[obj]{used|quota}@ properties must be appended with\n"
"a user|group|project specifier of one of these forms:\n"
2009-07-03 02:44:48 +04:00
" POSIX name (eg: \"matt\")\n"
" POSIX id (eg: \"126829\")\n"
" SMB name@domain (eg: \"matt@sun\")\n"
" SMB SID (eg: \"S-1-234-567-89\")\n"));
2008-11-20 23:01:55 +03:00
} else {
(void) fprintf(fp,
2009-01-16 00:59:39 +03:00
gettext("\nFor the property list, run: %s\n"),
"zfs set|get");
2008-11-20 23:01:55 +03:00
(void) fprintf(fp,
2009-01-16 00:59:39 +03:00
gettext("\nFor the delegated permission list, run: %s\n"),
"zfs allow|unallow");
2008-11-20 23:01:55 +03:00
}
/*
* See comments at end of main().
*/
if (getenv("ZFS_ABORT") != NULL) {
(void) printf("dumping core by request\n");
abort();
}
exit(requested ? 0 : 2);
}
/*
* Take a property=value argument string and add it to the given nvlist.
* Modifies the argument inplace.
*/
static boolean_t
parseprop(nvlist_t *props, char *propname)
{
char *propval;
if ((propval = strchr(propname, '=')) == NULL) {
(void) fprintf(stderr, gettext("missing "
"'=' for property=value argument\n"));
return (B_FALSE);
}
*propval = '\0';
propval++;
if (nvlist_exists(props, propname)) {
(void) fprintf(stderr, gettext("property '%s' "
"specified multiple times\n"), propname);
return (B_FALSE);
}
if (nvlist_add_string(props, propname, propval) != 0)
nomem();
return (B_TRUE);
}
/*
* Take a property name argument and add it to the given nvlist.
* Modifies the argument inplace.
*/
static boolean_t
parsepropname(nvlist_t *props, char *propname)
{
if (strchr(propname, '=') != NULL) {
(void) fprintf(stderr, gettext("invalid character "
"'=' in property argument\n"));
return (B_FALSE);
}
if (nvlist_exists(props, propname)) {
(void) fprintf(stderr, gettext("property '%s' "
"specified multiple times\n"), propname);
return (B_FALSE);
}
if (nvlist_add_boolean(props, propname) != 0)
nomem();
return (B_TRUE);
}
2009-07-03 02:44:48 +04:00
static int
parse_depth(char *opt, int *flags)
{
char *tmp;
int depth;
depth = (int)strtol(opt, &tmp, 0);
if (*tmp) {
(void) fprintf(stderr,
gettext("%s is not an integer\n"), optarg);
usage(B_FALSE);
}
if (depth < 0) {
(void) fprintf(stderr,
gettext("Depth can not be negative.\n"));
usage(B_FALSE);
}
*flags |= (ZFS_ITER_DEPTH_LIMIT|ZFS_ITER_RECURSE);
return (depth);
}
#define PROGRESS_DELAY 2 /* seconds */
static const char *pt_reverse =
"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
static time_t pt_begin;
static char *pt_header = NULL;
static boolean_t pt_shown;
static void
start_progress_timer(void)
{
pt_begin = time(NULL) + PROGRESS_DELAY;
pt_shown = B_FALSE;
}
static void
set_progress_header(const char *header)
{
assert(pt_header == NULL);
pt_header = safe_strdup(header);
if (pt_shown) {
(void) printf("%s: ", header);
(void) fflush(stdout);
}
}
static void
update_progress(const char *update)
{
if (!pt_shown && time(NULL) > pt_begin) {
int len = strlen(update);
(void) printf("%s: %s%*.*s", pt_header, update, len, len,
pt_reverse);
(void) fflush(stdout);
pt_shown = B_TRUE;
} else if (pt_shown) {
int len = strlen(update);
(void) printf("%s%*.*s", update, len, len, pt_reverse);
(void) fflush(stdout);
}
}
static void
finish_progress(const char *done)
{
if (pt_shown) {
(void) puts(done);
(void) fflush(stdout);
}
free(pt_header);
pt_header = NULL;
}
static int
zfs_mount_and_share(libzfs_handle_t *hdl, const char *dataset, zfs_type_t type)
{
zfs_handle_t *zhp = NULL;
int ret = 0;
zhp = zfs_open(hdl, dataset, type);
if (zhp == NULL)
return (1);
/*
* Volumes may neither be mounted or shared. Potentially in the
* future filesystems detected on these volumes could be mounted.
*/
if (zfs_get_type(zhp) == ZFS_TYPE_VOLUME) {
zfs_close(zhp);
return (0);
}
/*
* Mount and/or share the new filesystem as appropriate. We provide a
* verbose error message to let the user know that their filesystem was
* in fact created, even if we failed to mount or share it.
*
* If the user doesn't want the dataset automatically mounted, then
* skip the mount/share step
*/
if (zfs_prop_valid_for_type(ZFS_PROP_CANMOUNT, type, B_FALSE) &&
zfs_prop_get_int(zhp, ZFS_PROP_CANMOUNT) == ZFS_CANMOUNT_ON) {
if (zfs_mount_delegation_check()) {
Add `zfs allow` and `zfs unallow` support ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487
2016-06-07 19:16:52 +03:00
(void) fprintf(stderr, gettext("filesystem "
"successfully created, but it may only be "
"mounted by root\n"));
ret = 1;
} else if (zfs_mount(zhp, NULL, 0) != 0) {
(void) fprintf(stderr, gettext("filesystem "
"successfully created, but not mounted\n"));
ret = 1;
} else if (zfs_share(zhp, NULL) != 0) {
(void) fprintf(stderr, gettext("filesystem "
"successfully created, but not shared\n"));
ret = 1;
}
zfs_commit_shares(NULL);
}
zfs_close(zhp);
return (ret);
}
2008-11-20 23:01:55 +03:00
/*
* zfs clone [-p] [-o prop=value] ... <snap> <fs | vol>
2008-11-20 23:01:55 +03:00
*
* Given an existing dataset, create a writable copy whose initial contents
* are the same as the source. The newly created dataset maintains a
* dependency on the original; the original cannot be destroyed so long as
* the clone exists.
*
* The '-p' flag creates all the non-existing ancestors of the target first.
*/
static int
zfs_do_clone(int argc, char **argv)
{
zfs_handle_t *zhp = NULL;
2008-11-20 23:01:55 +03:00
boolean_t parents = B_FALSE;
nvlist_t *props;
int ret = 0;
2008-11-20 23:01:55 +03:00
int c;
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "o:p")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'o':
if (!parseprop(props, optarg)) {
nvlist_free(props);
return (1);
}
break;
2008-11-20 23:01:55 +03:00
case 'p':
parents = B_TRUE;
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
goto usage;
2008-11-20 23:01:55 +03:00
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing source dataset "
"argument\n"));
goto usage;
2008-11-20 23:01:55 +03:00
}
if (argc < 2) {
(void) fprintf(stderr, gettext("missing target dataset "
"argument\n"));
goto usage;
2008-11-20 23:01:55 +03:00
}
if (argc > 2) {
(void) fprintf(stderr, gettext("too many arguments\n"));
goto usage;
2008-11-20 23:01:55 +03:00
}
/* open the source dataset */
if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_SNAPSHOT)) == NULL) {
nvlist_free(props);
2008-11-20 23:01:55 +03:00
return (1);
}
2008-11-20 23:01:55 +03:00
if (parents && zfs_name_valid(argv[1], ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_VOLUME)) {
/*
* Now create the ancestors of the target dataset. If the
* target already exists and '-p' option was used we should not
* complain.
*/
if (zfs_dataset_exists(g_zfs, argv[1], ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_VOLUME)) {
zfs_close(zhp);
nvlist_free(props);
2008-11-20 23:01:55 +03:00
return (0);
}
if (zfs_create_ancestors(g_zfs, argv[1]) != 0) {
zfs_close(zhp);
nvlist_free(props);
2008-11-20 23:01:55 +03:00
return (1);
}
2008-11-20 23:01:55 +03:00
}
/* pass to libzfs */
ret = zfs_clone(zhp, argv[1], props);
2008-11-20 23:01:55 +03:00
/* create the mountpoint if necessary */
if (ret == 0) {
if (log_history) {
(void) zpool_log_history(g_zfs, history_str);
log_history = B_FALSE;
}
ret = zfs_mount_and_share(g_zfs, argv[1], ZFS_TYPE_DATASET);
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
nvlist_free(props);
2008-11-20 23:01:55 +03:00
return (!!ret);
usage:
ASSERT3P(zhp, ==, NULL);
nvlist_free(props);
usage(B_FALSE);
return (-1);
2008-11-20 23:01:55 +03:00
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
/*
* Return a default volblocksize for the pool which always uses more than
* half of the data sectors. This primarily applies to dRAID which always
* writes full stripe widths.
*/
static uint64_t
default_volblocksize(zpool_handle_t *zhp, nvlist_t *props)
{
uint64_t volblocksize, asize = SPA_MINBLOCKSIZE;
nvlist_t *tree, **vdevs;
uint_t nvdevs;
nvlist_t *config = zpool_get_config(zhp, NULL);
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &tree) != 0 ||
nvlist_lookup_nvlist_array(tree, ZPOOL_CONFIG_CHILDREN,
&vdevs, &nvdevs) != 0) {
return (ZVOL_DEFAULT_BLOCKSIZE);
}
for (int i = 0; i < nvdevs; i++) {
nvlist_t *nv = vdevs[i];
uint64_t ashift, ndata, nparity;
if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ASHIFT, &ashift) != 0)
continue;
if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NDATA,
&ndata) == 0) {
/* dRAID minimum allocation width */
asize = MAX(asize, ndata * (1ULL << ashift));
} else if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY,
&nparity) == 0) {
/* raidz minimum allocation width */
if (nparity == 1)
asize = MAX(asize, 2 * (1ULL << ashift));
else
asize = MAX(asize, 4 * (1ULL << ashift));
} else {
/* mirror or (non-redundant) leaf vdev */
asize = MAX(asize, 1ULL << ashift);
}
}
/*
* Calculate the target volblocksize such that more than half
* of the asize is used. The following table is for 4k sectors.
*
* n asize blksz used | n asize blksz used
* -------------------------+---------------------------------
* 1 4,096 8,192 100% | 9 36,864 32,768 88%
* 2 8,192 8,192 100% | 10 40,960 32,768 80%
* 3 12,288 8,192 66% | 11 45,056 32,768 72%
* 4 16,384 16,384 100% | 12 49,152 32,768 66%
* 5 20,480 16,384 80% | 13 53,248 32,768 61%
* 6 24,576 16,384 66% | 14 57,344 32,768 57%
* 7 28,672 16,384 57% | 15 61,440 32,768 53%
* 8 32,768 32,768 100% | 16 65,536 65,636 100%
*
* This is primarily a concern for dRAID which always allocates
* a full stripe width. For dRAID the default stripe width is
* n=8 in which case the volblocksize is set to 32k. Ignoring
* compression there are no unused sectors. This same reasoning
* applies to raidz[2,3] so target 4 sectors to minimize waste.
*/
uint64_t tgt_volblocksize = ZVOL_DEFAULT_BLOCKSIZE;
while (tgt_volblocksize * 2 <= asize)
tgt_volblocksize *= 2;
const char *prop = zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE);
if (nvlist_lookup_uint64(props, prop, &volblocksize) == 0) {
/* Issue a warning when a non-optimal size is requested. */
if (volblocksize < ZVOL_DEFAULT_BLOCKSIZE) {
(void) fprintf(stderr, gettext("Warning: "
"volblocksize (%llu) is less than the default "
"minimum block size (%llu).\nTo reduce wasted "
"space a volblocksize of %llu is recommended.\n"),
(u_longlong_t)volblocksize,
(u_longlong_t)ZVOL_DEFAULT_BLOCKSIZE,
(u_longlong_t)tgt_volblocksize);
} else if (volblocksize < tgt_volblocksize) {
(void) fprintf(stderr, gettext("Warning: "
"volblocksize (%llu) is much less than the "
"minimum allocation\nunit (%llu), which wastes "
"at least %llu%% of space. To reduce wasted "
"space,\nuse a larger volblocksize (%llu is "
"recommended), fewer dRAID data disks\n"
"per group, or smaller sector size (ashift).\n"),
(u_longlong_t)volblocksize, (u_longlong_t)asize,
(u_longlong_t)((100 * (asize - volblocksize)) /
asize), (u_longlong_t)tgt_volblocksize);
}
} else {
volblocksize = tgt_volblocksize;
fnvlist_add_uint64(props, prop, volblocksize);
}
return (volblocksize);
}
2008-11-20 23:01:55 +03:00
/*
* zfs create [-Pnpv] [-o prop=value] ... fs
* zfs create [-Pnpsv] [-b blocksize] [-o prop=value] ... -V vol size
2008-11-20 23:01:55 +03:00
*
* Create a new dataset. This command can be used to create filesystems
* and volumes. Snapshot creation is handled by 'zfs snapshot'.
* For volumes, the user must specify a size to be used.
*
* The '-s' flag applies only to volumes, and indicates that we should not try
* to set the reservation for this volume. By default we set a reservation
* equal to the size for any volume. For pools with SPA_VERSION >=
* SPA_VERSION_REFRESERVATION, we set a refreservation instead.
*
* The '-p' flag creates all the non-existing ancestors of the target first.
*
* The '-n' flag is no-op (dry run) mode. This will perform a user-space sanity
* check of arguments and properties, but does not check for permissions,
* available space, etc.
*
* The '-u' flag prevents the newly created file system from being mounted.
*
* The '-v' flag is for verbose output.
*
* The '-P' flag is used for parseable output. It implies '-v'.
2008-11-20 23:01:55 +03:00
*/
static int
zfs_do_create(int argc, char **argv)
{
zfs_type_t type = ZFS_TYPE_FILESYSTEM;
zpool_handle_t *zpool_handle = NULL;
nvlist_t *real_props = NULL;
uint64_t volsize = 0;
2008-11-20 23:01:55 +03:00
int c;
boolean_t noreserve = B_FALSE;
boolean_t bflag = B_FALSE;
boolean_t parents = B_FALSE;
boolean_t dryrun = B_FALSE;
boolean_t nomount = B_FALSE;
boolean_t verbose = B_FALSE;
boolean_t parseable = B_FALSE;
2008-11-20 23:01:55 +03:00
int ret = 1;
nvlist_t *props;
2008-11-20 23:01:55 +03:00
uint64_t intval;
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
char *strval;
2008-11-20 23:01:55 +03:00
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, ":PV:b:nso:puv")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'V':
type = ZFS_TYPE_VOLUME;
if (zfs_nicestrtonum(g_zfs, optarg, &intval) != 0) {
(void) fprintf(stderr, gettext("bad volume "
"size '%s': %s\n"), optarg,
libzfs_error_description(g_zfs));
goto error;
}
if (nvlist_add_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLSIZE), intval) != 0)
nomem();
2008-11-20 23:01:55 +03:00
volsize = intval;
break;
case 'P':
verbose = B_TRUE;
parseable = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case 'p':
parents = B_TRUE;
break;
case 'b':
bflag = B_TRUE;
if (zfs_nicestrtonum(g_zfs, optarg, &intval) != 0) {
(void) fprintf(stderr, gettext("bad volume "
"block size '%s': %s\n"), optarg,
libzfs_error_description(g_zfs));
goto error;
}
if (nvlist_add_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
intval) != 0)
nomem();
2008-11-20 23:01:55 +03:00
break;
case 'n':
dryrun = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case 'o':
if (!parseprop(props, optarg))
2008-11-20 23:01:55 +03:00
goto error;
break;
case 's':
noreserve = B_TRUE;
break;
case 'u':
nomount = B_TRUE;
break;
case 'v':
verbose = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case ':':
(void) fprintf(stderr, gettext("missing size "
"argument\n"));
goto badusage;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
goto badusage;
}
}
if ((bflag || noreserve) && type != ZFS_TYPE_VOLUME) {
(void) fprintf(stderr, gettext("'-s' and '-b' can only be "
"used when creating a volume\n"));
goto badusage;
}
if (nomount && type != ZFS_TYPE_FILESYSTEM) {
(void) fprintf(stderr, gettext("'-u' can only be "
"used when creating a filesystem\n"));
goto badusage;
}
2008-11-20 23:01:55 +03:00
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc == 0) {
(void) fprintf(stderr, gettext("missing %s argument\n"),
zfs_type_to_name(type));
goto badusage;
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
goto badusage;
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
if (dryrun || type == ZFS_TYPE_VOLUME) {
char msg[ZFS_MAX_DATASET_NAME_LEN * 2];
2008-11-20 23:01:55 +03:00
char *p;
if ((p = strchr(argv[0], '/')) != NULL)
2008-11-20 23:01:55 +03:00
*p = '\0';
zpool_handle = zpool_open(g_zfs, argv[0]);
if (p != NULL)
*p = '/';
if (zpool_handle == NULL)
goto error;
(void) snprintf(msg, sizeof (msg),
dryrun ? gettext("cannot verify '%s'") :
gettext("cannot create '%s'"), argv[0]);
if (props && (real_props = zfs_valid_proplist(g_zfs, type,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
props, 0, NULL, zpool_handle, B_TRUE, msg)) == NULL) {
zpool_close(zpool_handle);
goto error;
}
}
if (type == ZFS_TYPE_VOLUME) {
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
const char *prop = zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE);
uint64_t volblocksize = default_volblocksize(zpool_handle,
real_props);
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
if (volblocksize != ZVOL_DEFAULT_BLOCKSIZE &&
nvlist_lookup_string(props, prop, &strval) != 0) {
if (asprintf(&strval, "%llu",
(u_longlong_t)volblocksize) == -1)
nomem();
nvlist_add_string(props, prop, strval);
free(strval);
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-14 00:51:51 +03:00
/*
* If volsize is not a multiple of volblocksize, round it
* up to the nearest multiple of the volblocksize.
*/
if (volsize % volblocksize) {
volsize = P2ROUNDUP_TYPED(volsize, volblocksize,
uint64_t);
if (nvlist_add_uint64(props,
zfs_prop_to_name(ZFS_PROP_VOLSIZE), volsize) != 0) {
nvlist_free(props);
nomem();
}
}
}
if (type == ZFS_TYPE_VOLUME && !noreserve) {
uint64_t spa_version;
zfs_prop_t resv_prop;
spa_version = zpool_get_prop_int(zpool_handle,
ZPOOL_PROP_VERSION, NULL);
if (spa_version >= SPA_VERSION_REFRESERVATION)
resv_prop = ZFS_PROP_REFRESERVATION;
else
resv_prop = ZFS_PROP_RESERVATION;
volsize = zvol_volsize_to_reservation(zpool_handle, volsize,
real_props);
2008-11-20 23:01:55 +03:00
if (nvlist_lookup_string(props, zfs_prop_to_name(resv_prop),
&strval) != 0) {
if (nvlist_add_uint64(props,
zfs_prop_to_name(resv_prop), volsize) != 0) {
nvlist_free(props);
nomem();
2008-11-20 23:01:55 +03:00
}
}
}
if (zpool_handle != NULL) {
zpool_close(zpool_handle);
nvlist_free(real_props);
}
2008-11-20 23:01:55 +03:00
if (parents && zfs_name_valid(argv[0], type)) {
/*
* Now create the ancestors of target dataset. If the target
* already exists and '-p' option was used we should not
* complain.
*/
if (zfs_dataset_exists(g_zfs, argv[0], type)) {
ret = 0;
goto error;
}
if (verbose) {
(void) printf(parseable ? "create_ancestors\t%s\n" :
dryrun ? "would create ancestors of %s\n" :
"create ancestors of %s\n", argv[0]);
}
if (!dryrun) {
if (zfs_create_ancestors(g_zfs, argv[0]) != 0) {
goto error;
}
}
}
if (verbose) {
nvpair_t *nvp = NULL;
(void) printf(parseable ? "create\t%s\n" :
dryrun ? "would create %s\n" : "create %s\n", argv[0]);
while ((nvp = nvlist_next_nvpair(props, nvp)) != NULL) {
uint64_t uval;
char *sval;
switch (nvpair_type(nvp)) {
case DATA_TYPE_UINT64:
VERIFY0(nvpair_value_uint64(nvp, &uval));
(void) printf(parseable ?
"property\t%s\t%llu\n" : "\t%s=%llu\n",
nvpair_name(nvp), (u_longlong_t)uval);
break;
case DATA_TYPE_STRING:
VERIFY0(nvpair_value_string(nvp, &sval));
(void) printf(parseable ?
"property\t%s\t%s\n" : "\t%s=%s\n",
nvpair_name(nvp), sval);
break;
default:
(void) fprintf(stderr, "property '%s' "
"has illegal type %d\n",
nvpair_name(nvp), nvpair_type(nvp));
abort();
}
}
}
if (dryrun) {
ret = 0;
goto error;
2008-11-20 23:01:55 +03:00
}
/* pass to libzfs */
if (zfs_create(g_zfs, argv[0], type, props) != 0)
goto error;
if (log_history) {
(void) zpool_log_history(g_zfs, history_str);
log_history = B_FALSE;
}
if (nomount) {
ret = 0;
goto error;
}
ret = zfs_mount_and_share(g_zfs, argv[0], ZFS_TYPE_DATASET);
2008-11-20 23:01:55 +03:00
error:
nvlist_free(props);
return (ret);
badusage:
nvlist_free(props);
usage(B_FALSE);
return (2);
}
/*
* zfs destroy [-rRf] <fs, vol>
* zfs destroy [-rRd] <snap>
2008-11-20 23:01:55 +03:00
*
* -r Recursively destroy all children
* -R Recursively destroy all dependents, including clones
* -f Force unmounting of any dependents
2009-08-18 22:43:27 +04:00
* -d If we can't destroy now, mark for deferred destruction
2008-11-20 23:01:55 +03:00
*
* Destroys the given dataset. By default, it will unmount any filesystems,
* and refuse to destroy a dataset that has any dependents. A dependent can
* either be a child, or a clone of a child.
*/
typedef struct destroy_cbdata {
boolean_t cb_first;
boolean_t cb_force;
boolean_t cb_recurse;
boolean_t cb_error;
boolean_t cb_doclones;
2008-11-20 23:01:55 +03:00
zfs_handle_t *cb_target;
2009-08-18 22:43:27 +04:00
boolean_t cb_defer_destroy;
boolean_t cb_verbose;
boolean_t cb_parsable;
boolean_t cb_dryrun;
nvlist_t *cb_nvl;
nvlist_t *cb_batchedsnaps;
/* first snap in contiguous run */
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
char *cb_firstsnap;
/* previous snap in contiguous run */
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
char *cb_prevsnap;
int64_t cb_snapused;
char *cb_snapspec;
char *cb_bookmark;
uint64_t cb_snap_count;
2008-11-20 23:01:55 +03:00
} destroy_cbdata_t;
/*
* Check for any dependents based on the '-r' or '-R' flags.
*/
static int
destroy_check_dependent(zfs_handle_t *zhp, void *data)
{
destroy_cbdata_t *cbp = data;
const char *tname = zfs_get_name(cbp->cb_target);
const char *name = zfs_get_name(zhp);
if (strncmp(tname, name, strlen(tname)) == 0 &&
(name[strlen(tname)] == '/' || name[strlen(tname)] == '@')) {
/*
* This is a direct descendant, not a clone somewhere else in
* the hierarchy.
*/
if (cbp->cb_recurse)
goto out;
if (cbp->cb_first) {
(void) fprintf(stderr, gettext("cannot destroy '%s': "
"%s has children\n"),
zfs_get_name(cbp->cb_target),
zfs_type_to_name(zfs_get_type(cbp->cb_target)));
(void) fprintf(stderr, gettext("use '-r' to destroy "
"the following datasets:\n"));
cbp->cb_first = B_FALSE;
cbp->cb_error = B_TRUE;
2008-11-20 23:01:55 +03:00
}
(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
} else {
/*
* This is a clone. We only want to report this if the '-r'
* wasn't specified, or the target is a snapshot.
*/
if (!cbp->cb_recurse &&
zfs_get_type(cbp->cb_target) != ZFS_TYPE_SNAPSHOT)
goto out;
if (cbp->cb_first) {
(void) fprintf(stderr, gettext("cannot destroy '%s': "
"%s has dependent clones\n"),
zfs_get_name(cbp->cb_target),
zfs_type_to_name(zfs_get_type(cbp->cb_target)));
(void) fprintf(stderr, gettext("use '-R' to destroy "
"the following datasets:\n"));
cbp->cb_first = B_FALSE;
cbp->cb_error = B_TRUE;
cbp->cb_dryrun = B_TRUE;
2008-11-20 23:01:55 +03:00
}
(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
}
out:
zfs_close(zhp);
return (0);
}
static int
destroy_batched(destroy_cbdata_t *cb)
{
int error = zfs_destroy_snaps_nvl(g_zfs,
cb->cb_batchedsnaps, B_FALSE);
fnvlist_free(cb->cb_batchedsnaps);
cb->cb_batchedsnaps = fnvlist_alloc();
return (error);
}
2008-11-20 23:01:55 +03:00
static int
destroy_callback(zfs_handle_t *zhp, void *data)
{
destroy_cbdata_t *cb = data;
const char *name = zfs_get_name(zhp);
int error;
if (cb->cb_verbose) {
if (cb->cb_parsable) {
(void) printf("destroy\t%s\n", name);
} else if (cb->cb_dryrun) {
(void) printf(gettext("would destroy %s\n"),
name);
} else {
(void) printf(gettext("will destroy %s\n"),
name);
}
}
2008-11-20 23:01:55 +03:00
/*
* Ignore pools (which we've already flagged as an error before getting
* here).
2008-11-20 23:01:55 +03:00
*/
if (strchr(zfs_get_name(zhp), '/') == NULL &&
zfs_get_type(zhp) == ZFS_TYPE_FILESYSTEM) {
zfs_close(zhp);
return (0);
}
if (cb->cb_dryrun) {
zfs_close(zhp);
return (0);
}
/*
* We batch up all contiguous snapshots (even of different
* filesystems) and destroy them with one ioctl. We can't
* simply do all snap deletions and then all fs deletions,
* because we must delete a clone before its origin.
*/
if (zfs_get_type(zhp) == ZFS_TYPE_SNAPSHOT) {
cb->cb_snap_count++;
fnvlist_add_boolean(cb->cb_batchedsnaps, name);
if (cb->cb_snap_count % 10 == 0 && cb->cb_defer_destroy)
error = destroy_batched(cb);
} else {
error = destroy_batched(cb);
if (error != 0 ||
zfs_unmount(zhp, NULL, cb->cb_force ? MS_FORCE : 0) != 0 ||
zfs_destroy(zhp, cb->cb_defer_destroy) != 0) {
zfs_close(zhp);
/*
* When performing a recursive destroy we ignore errors
* so that the recursive destroy could continue
* destroying past problem datasets
*/
if (cb->cb_recurse) {
cb->cb_error = B_TRUE;
return (0);
}
return (-1);
}
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
return (0);
}
static int
destroy_print_cb(zfs_handle_t *zhp, void *arg)
2008-11-20 23:01:55 +03:00
{
destroy_cbdata_t *cb = arg;
const char *name = zfs_get_name(zhp);
int err = 0;
if (nvlist_exists(cb->cb_nvl, name)) {
if (cb->cb_firstsnap == NULL)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
cb->cb_firstsnap = strdup(name);
if (cb->cb_prevsnap != NULL)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
free(cb->cb_prevsnap);
/* this snap continues the current range */
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
cb->cb_prevsnap = strdup(name);
if (cb->cb_firstsnap == NULL || cb->cb_prevsnap == NULL)
nomem();
if (cb->cb_verbose) {
if (cb->cb_parsable) {
(void) printf("destroy\t%s\n", name);
} else if (cb->cb_dryrun) {
(void) printf(gettext("would destroy %s\n"),
name);
} else {
(void) printf(gettext("will destroy %s\n"),
name);
}
2008-11-20 23:01:55 +03:00
}
} else if (cb->cb_firstsnap != NULL) {
/* end of this range */
uint64_t used = 0;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
err = lzc_snaprange_space(cb->cb_firstsnap,
cb->cb_prevsnap, &used);
cb->cb_snapused += used;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
free(cb->cb_firstsnap);
cb->cb_firstsnap = NULL;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
free(cb->cb_prevsnap);
cb->cb_prevsnap = NULL;
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
return (err);
}
2008-11-20 23:01:55 +03:00
static int
destroy_print_snapshots(zfs_handle_t *fs_zhp, destroy_cbdata_t *cb)
{
int err;
assert(cb->cb_firstsnap == NULL);
assert(cb->cb_prevsnap == NULL);
err = zfs_iter_snapshots_sorted(fs_zhp, destroy_print_cb, cb, 0, 0);
if (cb->cb_firstsnap != NULL) {
uint64_t used = 0;
if (err == 0) {
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
err = lzc_snaprange_space(cb->cb_firstsnap,
cb->cb_prevsnap, &used);
}
cb->cb_snapused += used;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
free(cb->cb_firstsnap);
cb->cb_firstsnap = NULL;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
free(cb->cb_prevsnap);
cb->cb_prevsnap = NULL;
}
return (err);
}
static int
snapshot_to_nvl_cb(zfs_handle_t *zhp, void *arg)
{
destroy_cbdata_t *cb = arg;
int err = 0;
/* Check for clones. */
if (!cb->cb_doclones && !cb->cb_defer_destroy) {
cb->cb_target = zhp;
cb->cb_first = B_TRUE;
err = zfs_iter_dependents(zhp, B_TRUE,
destroy_check_dependent, cb);
}
if (err == 0) {
if (nvlist_add_boolean(cb->cb_nvl, zfs_get_name(zhp)))
nomem();
}
zfs_close(zhp);
return (err);
}
static int
gather_snapshots(zfs_handle_t *zhp, void *arg)
{
destroy_cbdata_t *cb = arg;
int err = 0;
err = zfs_iter_snapspec(zhp, cb->cb_snapspec, snapshot_to_nvl_cb, cb);
if (err == ENOENT)
err = 0;
if (err != 0)
goto out;
if (cb->cb_verbose) {
err = destroy_print_snapshots(zhp, cb);
if (err != 0)
goto out;
}
if (cb->cb_recurse)
err = zfs_iter_filesystems(zhp, gather_snapshots, cb);
out:
zfs_close(zhp);
return (err);
}
static int
destroy_clones(destroy_cbdata_t *cb)
{
nvpair_t *pair;
for (pair = nvlist_next_nvpair(cb->cb_nvl, NULL);
pair != NULL;
pair = nvlist_next_nvpair(cb->cb_nvl, pair)) {
zfs_handle_t *zhp = zfs_open(g_zfs, nvpair_name(pair),
ZFS_TYPE_SNAPSHOT);
if (zhp != NULL) {
boolean_t defer = cb->cb_defer_destroy;
int err;
/*
* We can't defer destroy non-snapshots, so set it to
* false while destroying the clones.
*/
cb->cb_defer_destroy = B_FALSE;
err = zfs_iter_dependents(zhp, B_FALSE,
destroy_callback, cb);
cb->cb_defer_destroy = defer;
zfs_close(zhp);
if (err != 0)
return (err);
}
}
return (0);
2008-11-20 23:01:55 +03:00
}
static int
zfs_do_destroy(int argc, char **argv)
{
destroy_cbdata_t cb = { 0 };
int rv = 0;
int err = 0;
2008-11-20 23:01:55 +03:00
int c;
zfs_handle_t *zhp = NULL;
char *at, *pound;
zfs_type_t type = ZFS_TYPE_DATASET;
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "vpndfrR")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'v':
cb.cb_verbose = B_TRUE;
break;
case 'p':
cb.cb_verbose = B_TRUE;
cb.cb_parsable = B_TRUE;
break;
case 'n':
cb.cb_dryrun = B_TRUE;
break;
2009-08-18 22:43:27 +04:00
case 'd':
cb.cb_defer_destroy = B_TRUE;
type = ZFS_TYPE_SNAPSHOT;
2009-08-18 22:43:27 +04:00
break;
2008-11-20 23:01:55 +03:00
case 'f':
cb.cb_force = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'r':
cb.cb_recurse = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'R':
cb.cb_recurse = B_TRUE;
cb.cb_doclones = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case '?':
default:
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc == 0) {
(void) fprintf(stderr, gettext("missing dataset argument\n"));
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
at = strchr(argv[0], '@');
pound = strchr(argv[0], '#');
if (at != NULL) {
2008-11-20 23:01:55 +03:00
/* Build the list of snaps to destroy in cb_nvl. */
cb.cb_nvl = fnvlist_alloc();
*at = '\0';
zhp = zfs_open(g_zfs, argv[0],
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL) {
nvlist_free(cb.cb_nvl);
2008-11-20 23:01:55 +03:00
return (1);
}
2008-11-20 23:01:55 +03:00
cb.cb_snapspec = at + 1;
if (gather_snapshots(zfs_handle_dup(zhp), &cb) != 0 ||
cb.cb_error) {
rv = 1;
goto out;
}
if (nvlist_empty(cb.cb_nvl)) {
(void) fprintf(stderr, gettext("could not find any "
"snapshots to destroy; check snapshot names.\n"));
rv = 1;
goto out;
}
if (cb.cb_verbose) {
char buf[16];
zfs_nicebytes(cb.cb_snapused, buf, sizeof (buf));
if (cb.cb_parsable) {
(void) printf("reclaim\t%llu\n",
(u_longlong_t)cb.cb_snapused);
} else if (cb.cb_dryrun) {
(void) printf(gettext("would reclaim %s\n"),
buf);
} else {
(void) printf(gettext("will reclaim %s\n"),
buf);
2008-11-20 23:01:55 +03:00
}
}
if (!cb.cb_dryrun) {
if (cb.cb_doclones) {
cb.cb_batchedsnaps = fnvlist_alloc();
err = destroy_clones(&cb);
if (err == 0) {
err = zfs_destroy_snaps_nvl(g_zfs,
cb.cb_batchedsnaps, B_FALSE);
}
if (err != 0) {
rv = 1;
goto out;
}
}
if (err == 0) {
err = zfs_destroy_snaps_nvl(g_zfs, cb.cb_nvl,
cb.cb_defer_destroy);
}
2008-11-20 23:01:55 +03:00
}
if (err != 0)
rv = 1;
} else if (pound != NULL) {
int err;
nvlist_t *nvl;
if (cb.cb_dryrun) {
(void) fprintf(stderr,
"dryrun is not supported with bookmark\n");
return (-1);
}
if (cb.cb_defer_destroy) {
(void) fprintf(stderr,
"defer destroy is not supported with bookmark\n");
return (-1);
}
if (cb.cb_recurse) {
(void) fprintf(stderr,
"recursive is not supported with bookmark\n");
return (-1);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
/*
* Unfortunately, zfs_bookmark() doesn't honor the
* casesensitivity setting. However, we can't simply
* remove this check, because lzc_destroy_bookmarks()
* ignores non-existent bookmarks, so this is necessary
* to get a proper error message.
*/
if (!zfs_bookmark_exists(argv[0])) {
(void) fprintf(stderr, gettext("bookmark '%s' "
"does not exist.\n"), argv[0]);
return (1);
}
nvl = fnvlist_alloc();
fnvlist_add_boolean(nvl, argv[0]);
err = lzc_destroy_bookmarks(nvl, NULL);
if (err != 0) {
(void) zfs_standard_error(g_zfs, err,
"cannot destroy bookmark");
}
nvlist_free(nvl);
return (err);
} else {
/* Open the given dataset */
if ((zhp = zfs_open(g_zfs, argv[0], type)) == NULL)
return (1);
2008-11-20 23:01:55 +03:00
cb.cb_target = zhp;
2008-11-20 23:01:55 +03:00
/*
* Perform an explicit check for pools before going any further.
*/
if (!cb.cb_recurse && strchr(zfs_get_name(zhp), '/') == NULL &&
zfs_get_type(zhp) == ZFS_TYPE_FILESYSTEM) {
(void) fprintf(stderr, gettext("cannot destroy '%s': "
"operation does not apply to pools\n"),
zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use 'zfs destroy -r "
"%s' to destroy all datasets in the pool\n"),
zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use 'zpool destroy %s' "
"to destroy the pool itself\n"), zfs_get_name(zhp));
rv = 1;
goto out;
}
2008-11-20 23:01:55 +03:00
/*
* Check for any dependents and/or clones.
*/
cb.cb_first = B_TRUE;
if (!cb.cb_doclones &&
zfs_iter_dependents(zhp, B_TRUE, destroy_check_dependent,
&cb) != 0) {
rv = 1;
goto out;
}
2008-11-20 23:01:55 +03:00
if (cb.cb_error) {
rv = 1;
goto out;
}
cb.cb_batchedsnaps = fnvlist_alloc();
if (zfs_iter_dependents(zhp, B_FALSE, destroy_callback,
&cb) != 0) {
rv = 1;
goto out;
}
2008-11-20 23:01:55 +03:00
/*
* Do the real thing. The callback will close the
* handle regardless of whether it succeeds or not.
*/
err = destroy_callback(zhp, &cb);
zhp = NULL;
if (err == 0) {
err = zfs_destroy_snaps_nvl(g_zfs,
cb.cb_batchedsnaps, cb.cb_defer_destroy);
}
if (err != 0 || cb.cb_error == B_TRUE)
rv = 1;
}
2008-11-20 23:01:55 +03:00
out:
fnvlist_free(cb.cb_batchedsnaps);
fnvlist_free(cb.cb_nvl);
if (zhp != NULL)
zfs_close(zhp);
return (rv);
2008-11-20 23:01:55 +03:00
}
static boolean_t
is_recvd_column(zprop_get_cbdata_t *cbp)
{
int i;
zfs_get_column_t col;
for (i = 0; i < ZFS_GET_NCOLS &&
(col = cbp->cb_columns[i]) != GET_COL_NONE; i++)
if (col == GET_COL_RECVD)
return (B_TRUE);
return (B_FALSE);
}
2008-11-20 23:01:55 +03:00
/*
* zfs get [-rHp] [-o all | field[,field]...] [-s source[,source]...]
* < all | property[,property]... > < fs | snap | vol > ...
2008-11-20 23:01:55 +03:00
*
* -r recurse over any child datasets
* -H scripted mode. Headers are stripped, and fields are separated
* by tabs instead of spaces.
* -o Set of fields to display. One of "name,property,value,
* received,source". Default is "name,property,value,source".
* "all" is an alias for all five.
2008-11-20 23:01:55 +03:00
* -s Set of sources to allow. One of
* "local,default,inherited,received,temporary,none". Default is
* all six.
2008-11-20 23:01:55 +03:00
* -p Display values in parsable (literal) format.
*
* Prints properties for the given datasets. The user can control which
* columns to display as well as which property types to allow.
*/
/*
* Invoked to display the properties for a single dataset.
*/
static int
get_callback(zfs_handle_t *zhp, void *data)
{
char buf[ZFS_MAXPROPLEN];
char rbuf[ZFS_MAXPROPLEN];
undocumented libzfs API changes broke "zfs list" While OpenZFS does permit breaking changes to the libzfs API, we should avoid these changes when reasonably possible, and take steps to mitigate the impact to consumers when changes are necessary. Commit e4288a8397bb1f made a libzfs API change that is especially difficult for consumers because there is no change to the function signatures, only to their behavior. Therefore, consumers can't notice that there was a change at compile time. Also, the API change was incompletely and incorrectly documented. The commit message mentions `zfs_get_prop()` [sic], but all callers of `get_numeric_property()` are impacted: `zfs_prop_get()`, `zfs_prop_get_numeric()`, and `zfs_prop_get_int()`. `zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so it assumes that the filesystem is not mounted. This means that e.g. `zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0. The documentation says that to preserve the previous behavior, callers should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed to do that. However, the existing behavior is actually preserved by initializing `*src=ZPROP_SRC_ALL`, not `NONE`. The code comment above `zfs_prop_get()` says, "src: ... NULL will be treated as ZPROP_SRC_ALL.". However, the code actually treats NULL as ZPROP_SRC_NONE. i.e. `zfs_prop_get(src=NULL)` assumes that the filesystem is not mounted. There are several existing calls which use `src=NULL` which are impacted by the API change, most noticeably those used by `zfs list`, which now assumes that filesystems are not mounted. For example, `zfs list -o name,mounted` previously indicated whether a filesystem was mounted or not, but now it always (incorrectly) indicates that the filesystem is not mounted (`MOUNTED: no`). Similarly, properties that are set at mount time are ignored. E.g. `zfs list -o name,atime` may display an incorrect value if it was set at mount time. To address these problems, this commit reverts commit e4288a8397bb1f: "zfs get: don't lookup mount options when using "-s local"" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11999
2021-05-06 21:24:56 +03:00
zprop_source_t sourcetype;
char source[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
zprop_get_cbdata_t *cbp = data;
nvlist_t *user_props = zfs_get_user_props(zhp);
2008-11-20 23:01:55 +03:00
zprop_list_t *pl = cbp->cb_proplist;
nvlist_t *propval;
const char *strval;
const char *sourceval;
boolean_t received = is_recvd_column(cbp);
2008-11-20 23:01:55 +03:00
for (; pl != NULL; pl = pl->pl_next) {
char *recvdval = NULL;
2008-11-20 23:01:55 +03:00
/*
* Skip the special fake placeholder. This will also skip over
* the name property when 'all' is specified.
*/
if (pl->pl_prop == ZFS_PROP_NAME &&
pl == cbp->cb_proplist)
continue;
if (pl->pl_prop != ZPROP_USERPROP) {
2008-11-20 23:01:55 +03:00
if (zfs_prop_get(zhp, pl->pl_prop, buf,
sizeof (buf), &sourcetype, source,
sizeof (source),
cbp->cb_literal) != 0) {
if (pl->pl_all)
continue;
if (!zfs_prop_valid_for_type(pl->pl_prop,
ZFS_TYPE_DATASET, B_FALSE)) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr,
gettext("No such property '%s'\n"),
zfs_prop_to_name(pl->pl_prop));
continue;
}
sourcetype = ZPROP_SRC_NONE;
(void) strlcpy(buf, "-", sizeof (buf));
}
if (received && (zfs_prop_get_recvd(zhp,
zfs_prop_to_name(pl->pl_prop), rbuf, sizeof (rbuf),
cbp->cb_literal) == 0))
recvdval = rbuf;
2008-11-20 23:01:55 +03:00
zprop_print_one_property(zfs_get_name(zhp), cbp,
zfs_prop_to_name(pl->pl_prop),
buf, sourcetype, source, recvdval);
2009-07-03 02:44:48 +04:00
} else if (zfs_prop_userquota(pl->pl_user_prop)) {
sourcetype = ZPROP_SRC_LOCAL;
if (zfs_prop_get_userquota(zhp, pl->pl_user_prop,
buf, sizeof (buf), cbp->cb_literal) != 0) {
sourcetype = ZPROP_SRC_NONE;
(void) strlcpy(buf, "-", sizeof (buf));
}
zprop_print_one_property(zfs_get_name(zhp), cbp,
pl->pl_user_prop, buf, sourcetype, source, NULL);
} else if (zfs_prop_written(pl->pl_user_prop)) {
sourcetype = ZPROP_SRC_LOCAL;
if (zfs_prop_get_written(zhp, pl->pl_user_prop,
buf, sizeof (buf), cbp->cb_literal) != 0) {
sourcetype = ZPROP_SRC_NONE;
(void) strlcpy(buf, "-", sizeof (buf));
}
2009-07-03 02:44:48 +04:00
zprop_print_one_property(zfs_get_name(zhp), cbp,
pl->pl_user_prop, buf, sourcetype, source, NULL);
2008-11-20 23:01:55 +03:00
} else {
if (nvlist_lookup_nvlist(user_props,
2008-11-20 23:01:55 +03:00
pl->pl_user_prop, &propval) != 0) {
if (pl->pl_all)
continue;
sourcetype = ZPROP_SRC_NONE;
strval = "-";
} else {
strval = fnvlist_lookup_string(propval,
ZPROP_VALUE);
sourceval = fnvlist_lookup_string(propval,
ZPROP_SOURCE);
2008-11-20 23:01:55 +03:00
if (strcmp(sourceval,
zfs_get_name(zhp)) == 0) {
sourcetype = ZPROP_SRC_LOCAL;
} else if (strcmp(sourceval,
ZPROP_SOURCE_VAL_RECVD) == 0) {
sourcetype = ZPROP_SRC_RECEIVED;
2008-11-20 23:01:55 +03:00
} else {
sourcetype = ZPROP_SRC_INHERITED;
(void) strlcpy(source,
sourceval, sizeof (source));
}
}
if (received && (zfs_prop_get_recvd(zhp,
pl->pl_user_prop, rbuf, sizeof (rbuf),
cbp->cb_literal) == 0))
recvdval = rbuf;
2008-11-20 23:01:55 +03:00
zprop_print_one_property(zfs_get_name(zhp), cbp,
pl->pl_user_prop, strval, sourcetype,
source, recvdval);
2008-11-20 23:01:55 +03:00
}
}
return (0);
}
static int
zfs_do_get(int argc, char **argv)
{
zprop_get_cbdata_t cb = { 0 };
int i, c, flags = ZFS_ITER_ARGS_CAN_BE_PATHS;
int types = ZFS_TYPE_DATASET | ZFS_TYPE_BOOKMARK;
char *fields;
int ret = 0;
2009-07-03 02:44:48 +04:00
int limit = 0;
2008-11-20 23:01:55 +03:00
zprop_list_t fake_name = { 0 };
/*
* Set up default columns and sources.
*/
cb.cb_sources = ZPROP_SRC_ALL;
cb.cb_columns[0] = GET_COL_NAME;
cb.cb_columns[1] = GET_COL_PROPERTY;
cb.cb_columns[2] = GET_COL_VALUE;
cb.cb_columns[3] = GET_COL_SOURCE;
cb.cb_type = ZFS_TYPE_DATASET;
/* check options */
while ((c = getopt(argc, argv, ":d:o:s:rt:Hp")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'p':
cb.cb_literal = B_TRUE;
break;
2009-07-03 02:44:48 +04:00
case 'd':
limit = parse_depth(optarg, &flags);
break;
2008-11-20 23:01:55 +03:00
case 'r':
flags |= ZFS_ITER_RECURSE;
2008-11-20 23:01:55 +03:00
break;
case 'H':
cb.cb_scripted = B_TRUE;
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case 'o':
/*
* Process the set of columns to display. We zero out
* the structure to give us a blank slate.
*/
memset(&cb.cb_columns, 0, sizeof (cb.cb_columns));
2008-11-20 23:01:55 +03:00
i = 0;
for (char *tok; (tok = strsep(&optarg, ",")); ) {
static const char *const col_subopts[] =
{ "name", "property", "value",
"received", "source", "all" };
static const zfs_get_column_t col_subopt_col[] =
{ GET_COL_NAME, GET_COL_PROPERTY, GET_COL_VALUE,
GET_COL_RECVD, GET_COL_SOURCE };
static const int col_subopt_flags[] =
{ 0, 0, 0, ZFS_ITER_RECVD_PROPS, 0 };
2008-11-20 23:01:55 +03:00
if (i == ZFS_GET_NCOLS) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("too "
"many fields given to -o "
"option\n"));
usage(B_FALSE);
}
for (c = 0; c < ARRAY_SIZE(col_subopts); ++c)
if (strcmp(tok, col_subopts[c]) == 0)
goto found;
(void) fprintf(stderr,
gettext("invalid column name '%s'\n"), tok);
usage(B_FALSE);
found:
if (c >= 5) {
if (i > 0) {
(void) fprintf(stderr,
gettext("\"all\" conflicts "
"with specific fields "
"given to -o option\n"));
usage(B_FALSE);
}
memcpy(cb.cb_columns, col_subopt_col,
sizeof (col_subopt_col));
flags |= ZFS_ITER_RECVD_PROPS;
i = ZFS_GET_NCOLS;
} else {
cb.cb_columns[i++] = col_subopt_col[c];
flags |= col_subopt_flags[c];
2008-11-20 23:01:55 +03:00
}
}
break;
case 's':
cb.cb_sources = 0;
for (char *tok; (tok = strsep(&optarg, ",")); ) {
static const char *const source_opt[] = {
"local", "default",
"inherited", "received",
"temporary", "none" };
static const int source_flg[] = {
ZPROP_SRC_LOCAL, ZPROP_SRC_DEFAULT,
ZPROP_SRC_INHERITED, ZPROP_SRC_RECEIVED,
ZPROP_SRC_TEMPORARY, ZPROP_SRC_NONE };
for (i = 0; i < ARRAY_SIZE(source_opt); ++i)
if (strcmp(tok, source_opt[i]) == 0) {
cb.cb_sources |= source_flg[i];
goto found2;
}
(void) fprintf(stderr,
gettext("invalid source '%s'\n"), tok);
usage(B_FALSE);
found2:;
2008-11-20 23:01:55 +03:00
}
break;
case 't':
types = 0;
flags &= ~ZFS_ITER_PROP_LISTSNAPS;
for (char *tok; (tok = strsep(&optarg, ",")); ) {
static const char *const type_opts[] = {
"filesystem", "volume",
"snapshot", "snap",
"bookmark",
"all" };
static const int type_types[] = {
ZFS_TYPE_FILESYSTEM, ZFS_TYPE_VOLUME,
ZFS_TYPE_SNAPSHOT, ZFS_TYPE_SNAPSHOT,
ZFS_TYPE_BOOKMARK,
ZFS_TYPE_DATASET | ZFS_TYPE_BOOKMARK };
for (i = 0; i < ARRAY_SIZE(type_opts); ++i)
if (strcmp(tok, type_opts[i]) == 0) {
types |= type_types[i];
goto found3;
}
(void) fprintf(stderr,
gettext("invalid type '%s'\n"), tok);
usage(B_FALSE);
found3:;
}
break;
2008-11-20 23:01:55 +03:00
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (argc < 1) {
(void) fprintf(stderr, gettext("missing property "
"argument\n"));
usage(B_FALSE);
}
fields = argv[0];
/*
* Handle users who want to get all snapshots or bookmarks
* of a dataset (ex. 'zfs get -t snapshot refer <dataset>').
*/
if ((types == ZFS_TYPE_SNAPSHOT || types == ZFS_TYPE_BOOKMARK) &&
argc > 1 && (flags & ZFS_ITER_RECURSE) == 0 && limit == 0) {
flags |= (ZFS_ITER_DEPTH_LIMIT | ZFS_ITER_RECURSE);
limit = 1;
}
2008-11-20 23:01:55 +03:00
if (zprop_get_list(g_zfs, fields, &cb.cb_proplist, ZFS_TYPE_DATASET)
!= 0)
usage(B_FALSE);
argc--;
argv++;
/*
* As part of zfs_expand_proplist(), we keep track of the maximum column
* width for each property. For the 'NAME' (and 'SOURCE') columns, we
* need to know the maximum name length. However, the user likely did
* not specify 'name' as one of the properties to fetch, so we need to
* make sure we always include at least this property for
* print_get_headers() to work properly.
*/
if (cb.cb_proplist != NULL) {
fake_name.pl_prop = ZFS_PROP_NAME;
fake_name.pl_width = strlen(gettext("NAME"));
fake_name.pl_next = cb.cb_proplist;
cb.cb_proplist = &fake_name;
}
cb.cb_first = B_TRUE;
/* run for each object */
ret = zfs_for_each(argc, argv, flags, types, NULL,
2009-07-03 02:44:48 +04:00
&cb.cb_proplist, limit, get_callback, &cb);
2008-11-20 23:01:55 +03:00
if (cb.cb_proplist == &fake_name)
zprop_free_list(fake_name.pl_next);
else
zprop_free_list(cb.cb_proplist);
return (ret);
}
/*
* inherit [-rS] <property> <fs|vol> ...
2008-11-20 23:01:55 +03:00
*
* -r Recurse over all children
* -S Revert to received value, if any
2008-11-20 23:01:55 +03:00
*
* For each dataset specified on the command line, inherit the given property
* from its parent. Inheriting a property at the pool level will cause it to
* use the default value. The '-r' flag will recurse over all children, and is
* useful for setting a property on a hierarchy-wide basis, regardless of any
* local modifications for each dataset.
*/
typedef struct inherit_cbdata {
const char *cb_propname;
boolean_t cb_received;
} inherit_cbdata_t;
2008-11-20 23:01:55 +03:00
static int
inherit_recurse_cb(zfs_handle_t *zhp, void *data)
2008-11-20 23:01:55 +03:00
{
inherit_cbdata_t *cb = data;
zfs_prop_t prop = zfs_name_to_prop(cb->cb_propname);
2008-11-20 23:01:55 +03:00
/*
* If we're doing it recursively, then ignore properties that
* are not valid for this type of dataset.
*/
if (prop != ZPROP_INVAL &&
!zfs_prop_valid_for_type(prop, zfs_get_type(zhp), B_FALSE))
return (0);
return (zfs_prop_inherit(zhp, cb->cb_propname, cb->cb_received) != 0);
}
static int
inherit_cb(zfs_handle_t *zhp, void *data)
{
inherit_cbdata_t *cb = data;
return (zfs_prop_inherit(zhp, cb->cb_propname, cb->cb_received) != 0);
2008-11-20 23:01:55 +03:00
}
static int
zfs_do_inherit(int argc, char **argv)
{
int c;
zfs_prop_t prop;
inherit_cbdata_t cb = { 0 };
2008-11-20 23:01:55 +03:00
char *propname;
int ret = 0;
int flags = 0;
boolean_t received = B_FALSE;
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "rS")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'r':
flags |= ZFS_ITER_RECURSE;
2008-11-20 23:01:55 +03:00
break;
case 'S':
received = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case '?':
default:
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing property argument\n"));
usage(B_FALSE);
}
if (argc < 2) {
(void) fprintf(stderr, gettext("missing dataset argument\n"));
usage(B_FALSE);
}
propname = argv[0];
argc--;
argv++;
if ((prop = zfs_name_to_prop(propname)) != ZPROP_USERPROP) {
2008-11-20 23:01:55 +03:00
if (zfs_prop_readonly(prop)) {
(void) fprintf(stderr, gettext(
"%s property is read-only\n"),
propname);
return (1);
}
if (!zfs_prop_inheritable(prop) && !received) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("'%s' property cannot "
"be inherited\n"), propname);
if (prop == ZFS_PROP_QUOTA ||
prop == ZFS_PROP_RESERVATION ||
prop == ZFS_PROP_REFQUOTA ||
prop == ZFS_PROP_REFRESERVATION) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("use 'zfs set "
"%s=none' to clear\n"), propname);
(void) fprintf(stderr, gettext("use 'zfs "
"inherit -S %s' to revert to received "
"value\n"), propname);
}
2008-11-20 23:01:55 +03:00
return (1);
}
if (received && (prop == ZFS_PROP_VOLSIZE ||
prop == ZFS_PROP_VERSION)) {
(void) fprintf(stderr, gettext("'%s' property cannot "
"be reverted to a received value\n"), propname);
return (1);
}
2008-11-20 23:01:55 +03:00
} else if (!zfs_prop_user(propname)) {
(void) fprintf(stderr, gettext("invalid property '%s'\n"),
propname);
usage(B_FALSE);
}
cb.cb_propname = propname;
cb.cb_received = received;
if (flags & ZFS_ITER_RECURSE) {
ret = zfs_for_each(argc, argv, flags, ZFS_TYPE_DATASET,
NULL, NULL, 0, inherit_recurse_cb, &cb);
} else {
ret = zfs_for_each(argc, argv, flags, ZFS_TYPE_DATASET,
NULL, NULL, 0, inherit_cb, &cb);
}
2008-11-20 23:01:55 +03:00
return (ret);
}
typedef struct upgrade_cbdata {
uint64_t cb_numupgraded;
uint64_t cb_numsamegraded;
uint64_t cb_numfailed;
uint64_t cb_version;
boolean_t cb_newer;
boolean_t cb_foundone;
char cb_lastfs[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
} upgrade_cbdata_t;
static int
same_pool(zfs_handle_t *zhp, const char *name)
{
int len1 = strcspn(name, "/@");
const char *zhname = zfs_get_name(zhp);
int len2 = strcspn(zhname, "/@");
if (len1 != len2)
return (B_FALSE);
return (strncmp(name, zhname, len1) == 0);
}
static int
upgrade_list_callback(zfs_handle_t *zhp, void *data)
{
upgrade_cbdata_t *cb = data;
int version = zfs_prop_get_int(zhp, ZFS_PROP_VERSION);
/* list if it's old/new */
if ((!cb->cb_newer && version < ZPL_VERSION) ||
(cb->cb_newer && version > ZPL_VERSION)) {
char *str;
if (cb->cb_newer) {
str = gettext("The following filesystems are "
"formatted using a newer software version and\n"
"cannot be accessed on the current system.\n\n");
} else {
str = gettext("The following filesystems are "
"out of date, and can be upgraded. After being\n"
"upgraded, these filesystems (and any 'zfs send' "
"streams generated from\n"
"subsequent snapshots) will no longer be "
"accessible by older software versions.\n\n");
}
if (!cb->cb_foundone) {
(void) puts(str);
(void) printf(gettext("VER FILESYSTEM\n"));
(void) printf(gettext("--- ------------\n"));
cb->cb_foundone = B_TRUE;
}
(void) printf("%2u %s\n", version, zfs_get_name(zhp));
}
return (0);
}
static int
upgrade_set_callback(zfs_handle_t *zhp, void *data)
{
upgrade_cbdata_t *cb = data;
int version = zfs_prop_get_int(zhp, ZFS_PROP_VERSION);
int needed_spa_version;
int spa_version;
if (zfs_spa_version(zhp, &spa_version) < 0)
return (-1);
needed_spa_version = zfs_spa_version_map(cb->cb_version);
if (needed_spa_version < 0)
return (-1);
if (spa_version < needed_spa_version) {
/* can't upgrade */
(void) printf(gettext("%s: can not be "
"upgraded; the pool version needs to first "
"be upgraded\nto version %d\n\n"),
zfs_get_name(zhp), needed_spa_version);
cb->cb_numfailed++;
return (0);
2008-11-20 23:01:55 +03:00
}
/* upgrade */
if (version < cb->cb_version) {
char verstr[24];
2008-11-20 23:01:55 +03:00
(void) snprintf(verstr, sizeof (verstr),
"%llu", (u_longlong_t)cb->cb_version);
2008-11-20 23:01:55 +03:00
if (cb->cb_lastfs[0] && !same_pool(zhp, cb->cb_lastfs)) {
/*
* If they did "zfs upgrade -a", then we could
* be doing ioctls to different pools. We need
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
* to log this history once to each pool, and bypass
* the normal history logging that happens in main().
2008-11-20 23:01:55 +03:00
*/
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
(void) zpool_log_history(g_zfs, history_str);
log_history = B_FALSE;
2008-11-20 23:01:55 +03:00
}
if (zfs_prop_set(zhp, "version", verstr) == 0)
cb->cb_numupgraded++;
else
cb->cb_numfailed++;
Fix unsafe string operations Coverity caught unsafe use of `strcpy()` in `ztest_dmu_objset_own()`, `nfs_init_tmpfile()` and `dump_snapshot()`. It also caught an unsafe use of `strlcat()` in `nfs_init_tmpfile()`. Inspired by this, I did an audit of every single usage of `strcpy()` and `strcat()` in the code. If I could not prove that the usage was safe, I changed the code to use either `strlcpy()` or `strlcat()`, depending on which function was originally used. In some cases, `snprintf()` was used to replace multiple uses of `strcat` because it was cleaner. Whenever I changed a function, I preferred to use `sizeof(dst)` when the compiler is able to provide the string size via that. When it could not because the string was passed by a caller, I checked the entire call tree of the function to find out how big the buffer was and hard coded it. Hardcoding is less than ideal, but it is safe unless someone shrinks the buffer sizes being passed. Additionally, Coverity reported three more string related issues: * It caught a case where we do an overlapping memory copy in a call to `snprintf()`. We fix that via `kmem_strdup()` and `kmem_strfree()`. * It caught `sizeof (buf)` being used instead of `buflen` in `zdb_nicenum()`'s call to `zfs_nicenum()`, which is passed to `snprintf()`. We change that to pass `buflen`. * It caught a theoretical unterminated string passed to `strcmp()`. This one is likely a false positive, but we have the information needed to do this more safely, so we change this to silence the false positive not just in coverity, but potentially other static analysis tools too. We switch to `strncmp()`. * There was a false positive in tests/zfs-tests/cmd/dir_rd_update.c. We suppress it by switching to `snprintf()` since other static analysis tools might complain about it too. Interestingly, there is a possible real bug there too, since it assumes that the passed directory path ends with '/'. We add a '/' to fix that potential bug. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13913
2022-09-28 02:47:24 +03:00
(void) strlcpy(cb->cb_lastfs, zfs_get_name(zhp),
sizeof (cb->cb_lastfs));
2008-11-20 23:01:55 +03:00
} else if (version > cb->cb_version) {
/* can't downgrade */
(void) printf(gettext("%s: can not be downgraded; "
"it is already at version %u\n"),
zfs_get_name(zhp), version);
cb->cb_numfailed++;
} else {
cb->cb_numsamegraded++;
}
return (0);
}
/*
* zfs upgrade
* zfs upgrade -v
* zfs upgrade [-r] [-V <version>] <-a | filesystem>
*/
static int
zfs_do_upgrade(int argc, char **argv)
{
boolean_t all = B_FALSE;
boolean_t showversions = B_FALSE;
int ret = 0;
2008-11-20 23:01:55 +03:00
upgrade_cbdata_t cb = { 0 };
int c;
int flags = ZFS_ITER_ARGS_CAN_BE_PATHS;
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "rvV:a")) != -1) {
switch (c) {
case 'r':
flags |= ZFS_ITER_RECURSE;
2008-11-20 23:01:55 +03:00
break;
case 'v':
showversions = B_TRUE;
break;
case 'V':
if (zfs_prop_string_to_index(ZFS_PROP_VERSION,
optarg, &cb.cb_version) != 0) {
(void) fprintf(stderr,
gettext("invalid version %s\n"), optarg);
usage(B_FALSE);
}
break;
case 'a':
all = B_TRUE;
break;
case '?':
default:
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if ((!all && !argc) && ((flags & ZFS_ITER_RECURSE) | cb.cb_version))
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
if (showversions && (flags & ZFS_ITER_RECURSE || all ||
cb.cb_version || argc))
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
if ((all || argc) && (showversions))
usage(B_FALSE);
if (all && argc)
usage(B_FALSE);
if (showversions) {
/* Show info on available versions. */
(void) printf(gettext("The following filesystem versions are "
"supported:\n\n"));
(void) printf(gettext("VER DESCRIPTION\n"));
(void) printf("--- -----------------------------------------"
"---------------\n");
(void) printf(gettext(" 1 Initial ZFS filesystem version\n"));
(void) printf(gettext(" 2 Enhanced directory entries\n"));
(void) printf(gettext(" 3 Case insensitive and filesystem "
"user identifier (FUID)\n"));
2009-07-03 02:44:48 +04:00
(void) printf(gettext(" 4 userquota, groupquota "
"properties\n"));
(void) printf(gettext(" 5 System attributes\n"));
2008-11-20 23:01:55 +03:00
(void) printf(gettext("\nFor more information on a particular "
"version, including supported releases,\n"));
(void) printf("see the ZFS Administration Guide.\n\n");
2008-11-20 23:01:55 +03:00
ret = 0;
} else if (argc || all) {
/* Upgrade filesystems */
if (cb.cb_version == 0)
cb.cb_version = ZPL_VERSION;
ret = zfs_for_each(argc, argv, flags, ZFS_TYPE_FILESYSTEM,
2009-07-03 02:44:48 +04:00
NULL, NULL, 0, upgrade_set_callback, &cb);
2008-11-20 23:01:55 +03:00
(void) printf(gettext("%llu filesystems upgraded\n"),
(u_longlong_t)cb.cb_numupgraded);
2008-11-20 23:01:55 +03:00
if (cb.cb_numsamegraded) {
(void) printf(gettext("%llu filesystems already at "
"this version\n"),
(u_longlong_t)cb.cb_numsamegraded);
2008-11-20 23:01:55 +03:00
}
if (cb.cb_numfailed != 0)
ret = 1;
} else {
/* List old-version filesystems */
2008-11-20 23:01:55 +03:00
boolean_t found;
(void) printf(gettext("This system is currently running "
"ZFS filesystem version %llu.\n\n"), ZPL_VERSION);
flags |= ZFS_ITER_RECURSE;
ret = zfs_for_each(0, NULL, flags, ZFS_TYPE_FILESYSTEM,
2009-07-03 02:44:48 +04:00
NULL, NULL, 0, upgrade_list_callback, &cb);
2008-11-20 23:01:55 +03:00
found = cb.cb_foundone;
cb.cb_foundone = B_FALSE;
cb.cb_newer = B_TRUE;
ret = zfs_for_each(0, NULL, flags, ZFS_TYPE_FILESYSTEM,
2009-07-03 02:44:48 +04:00
NULL, NULL, 0, upgrade_list_callback, &cb);
2008-11-20 23:01:55 +03:00
if (!cb.cb_foundone && !found) {
(void) printf(gettext("All filesystems are "
"formatted with the current version.\n"));
}
}
return (ret);
}
/*
* zfs userspace [-Hinp] [-o field[,...]] [-s field [-s field]...]
* [-S field [-S field]...] [-t type[,...]]
* filesystem | snapshot | path
* zfs groupspace [-Hinp] [-o field[,...]] [-s field [-s field]...]
* [-S field [-S field]...] [-t type[,...]]
* filesystem | snapshot | path
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
* zfs projectspace [-Hp] [-o field[,...]] [-s field [-s field]...]
* [-S field [-S field]...] filesystem | snapshot | path
*
* -H Scripted mode; elide headers and separate columns by tabs.
* -i Translate SID to POSIX ID.
* -n Print numeric ID instead of user/group name.
* -o Control which fields to display.
* -p Use exact (parsable) numeric output.
* -s Specify sort columns, descending order.
* -S Specify sort columns, ascending order.
* -t Control which object types to display.
*
* Displays space consumed by, and quotas on, each user in the specified
* filesystem or snapshot.
*/
/* us_field_types, us_field_hdr and us_field_names should be kept in sync */
enum us_field_types {
USFIELD_TYPE,
USFIELD_NAME,
USFIELD_USED,
USFIELD_QUOTA,
USFIELD_OBJUSED,
USFIELD_OBJQUOTA
};
static const char *const us_field_hdr[] = { "TYPE", "NAME", "USED", "QUOTA",
"OBJUSED", "OBJQUOTA" };
static const char *const us_field_names[] = { "type", "name", "used", "quota",
"objused", "objquota" };
#define USFIELD_LAST (sizeof (us_field_names) / sizeof (char *))
#define USTYPE_PSX_GRP (1 << 0)
#define USTYPE_PSX_USR (1 << 1)
#define USTYPE_SMB_GRP (1 << 2)
#define USTYPE_SMB_USR (1 << 3)
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
#define USTYPE_PROJ (1 << 4)
#define USTYPE_ALL \
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(USTYPE_PSX_GRP | USTYPE_PSX_USR | USTYPE_SMB_GRP | USTYPE_SMB_USR | \
USTYPE_PROJ)
static int us_type_bits[] = {
USTYPE_PSX_GRP,
USTYPE_PSX_USR,
USTYPE_SMB_GRP,
USTYPE_SMB_USR,
USTYPE_ALL
};
static const char *const us_type_names[] = { "posixgroup", "posixuser",
"smbgroup", "smbuser", "all" };
typedef struct us_node {
nvlist_t *usn_nvl;
uu_avl_node_t usn_avlnode;
uu_list_node_t usn_listnode;
} us_node_t;
typedef struct us_cbdata {
nvlist_t **cb_nvlp;
uu_avl_pool_t *cb_avl_pool;
uu_avl_t *cb_avl;
boolean_t cb_numname;
boolean_t cb_nicenum;
boolean_t cb_sid2posix;
zfs_userquota_prop_t cb_prop;
zfs_sort_column_t *cb_sortcol;
size_t cb_width[USFIELD_LAST];
} us_cbdata_t;
static boolean_t us_populated = B_FALSE;
typedef struct {
zfs_sort_column_t *si_sortcol;
boolean_t si_numname;
} us_sort_info_t;
static int
us_field_index(const char *field)
{
for (int i = 0; i < USFIELD_LAST; i++) {
if (strcmp(field, us_field_names[i]) == 0)
return (i);
}
return (-1);
}
static int
us_compare(const void *larg, const void *rarg, void *unused)
{
const us_node_t *l = larg;
const us_node_t *r = rarg;
us_sort_info_t *si = (us_sort_info_t *)unused;
zfs_sort_column_t *sortcol = si->si_sortcol;
boolean_t numname = si->si_numname;
nvlist_t *lnvl = l->usn_nvl;
nvlist_t *rnvl = r->usn_nvl;
int rc = 0;
boolean_t lvb, rvb;
for (; sortcol != NULL; sortcol = sortcol->sc_next) {
char *lvstr = (char *)"";
char *rvstr = (char *)"";
uint32_t lv32 = 0;
uint32_t rv32 = 0;
uint64_t lv64 = 0;
uint64_t rv64 = 0;
zfs_prop_t prop = sortcol->sc_prop;
const char *propname = NULL;
boolean_t reverse = sortcol->sc_reverse;
switch (prop) {
case ZFS_PROP_TYPE:
propname = "type";
(void) nvlist_lookup_uint32(lnvl, propname, &lv32);
(void) nvlist_lookup_uint32(rnvl, propname, &rv32);
if (rv32 != lv32)
rc = (rv32 < lv32) ? 1 : -1;
break;
case ZFS_PROP_NAME:
propname = "name";
if (numname) {
compare_nums:
(void) nvlist_lookup_uint64(lnvl, propname,
&lv64);
(void) nvlist_lookup_uint64(rnvl, propname,
&rv64);
if (rv64 != lv64)
rc = (rv64 < lv64) ? 1 : -1;
} else {
if ((nvlist_lookup_string(lnvl, propname,
&lvstr) == ENOENT) ||
(nvlist_lookup_string(rnvl, propname,
&rvstr) == ENOENT)) {
goto compare_nums;
}
rc = strcmp(lvstr, rvstr);
}
break;
case ZFS_PROP_USED:
case ZFS_PROP_QUOTA:
if (!us_populated)
break;
if (prop == ZFS_PROP_USED)
propname = "used";
else
propname = "quota";
(void) nvlist_lookup_uint64(lnvl, propname, &lv64);
(void) nvlist_lookup_uint64(rnvl, propname, &rv64);
if (rv64 != lv64)
rc = (rv64 < lv64) ? 1 : -1;
break;
default:
break;
}
if (rc != 0) {
if (rc < 0)
return (reverse ? 1 : -1);
else
return (reverse ? -1 : 1);
}
}
/*
* If entries still seem to be the same, check if they are of the same
* type (smbentity is added only if we are doing SID to POSIX ID
* translation where we can have duplicate type/name combinations).
*/
if (nvlist_lookup_boolean_value(lnvl, "smbentity", &lvb) == 0 &&
nvlist_lookup_boolean_value(rnvl, "smbentity", &rvb) == 0 &&
lvb != rvb)
return (lvb < rvb ? -1 : 1);
return (0);
}
static boolean_t
zfs_prop_is_user(unsigned p)
{
return (p == ZFS_PROP_USERUSED || p == ZFS_PROP_USERQUOTA ||
p == ZFS_PROP_USEROBJUSED || p == ZFS_PROP_USEROBJQUOTA);
}
static boolean_t
zfs_prop_is_group(unsigned p)
{
return (p == ZFS_PROP_GROUPUSED || p == ZFS_PROP_GROUPQUOTA ||
p == ZFS_PROP_GROUPOBJUSED || p == ZFS_PROP_GROUPOBJQUOTA);
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
static boolean_t
zfs_prop_is_project(unsigned p)
{
return (p == ZFS_PROP_PROJECTUSED || p == ZFS_PROP_PROJECTQUOTA ||
p == ZFS_PROP_PROJECTOBJUSED || p == ZFS_PROP_PROJECTOBJQUOTA);
}
static inline const char *
us_type2str(unsigned field_type)
{
switch (field_type) {
case USTYPE_PSX_USR:
return ("POSIX User");
case USTYPE_PSX_GRP:
return ("POSIX Group");
case USTYPE_SMB_USR:
return ("SMB User");
case USTYPE_SMB_GRP:
return ("SMB Group");
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case USTYPE_PROJ:
return ("Project");
default:
return ("Undefined");
}
}
2009-07-03 02:44:48 +04:00
static int
userspace_cb(void *arg, const char *domain, uid_t rid, uint64_t space)
{
us_cbdata_t *cb = (us_cbdata_t *)arg;
zfs_userquota_prop_t prop = cb->cb_prop;
2009-07-03 02:44:48 +04:00
char *name = NULL;
const char *propname;
2009-07-03 02:44:48 +04:00
char sizebuf[32];
us_node_t *node;
uu_avl_pool_t *avl_pool = cb->cb_avl_pool;
uu_avl_t *avl = cb->cb_avl;
uu_avl_index_t idx;
nvlist_t *props;
us_node_t *n;
zfs_sort_column_t *sortcol = cb->cb_sortcol;
unsigned type = 0;
const char *typestr;
size_t namelen;
size_t typelen;
size_t sizelen;
int typeidx, nameidx, sizeidx;
us_sort_info_t sortinfo = { sortcol, cb->cb_numname };
boolean_t smbentity = B_FALSE;
2009-07-03 02:44:48 +04:00
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
node = safe_malloc(sizeof (us_node_t));
uu_avl_node_init(node, &node->usn_avlnode, avl_pool);
node->usn_nvl = props;
if (domain != NULL && domain[0] != '\0') {
#ifdef HAVE_IDMAP
/* SMB */
char sid[MAXNAMELEN + 32];
uid_t id;
uint64_t classes;
int err;
directory_error_t e;
smbentity = B_TRUE;
(void) snprintf(sid, sizeof (sid), "%s-%u", domain, rid);
if (prop == ZFS_PROP_GROUPUSED || prop == ZFS_PROP_GROUPQUOTA) {
type = USTYPE_SMB_GRP;
err = sid_to_id(sid, B_FALSE, &id);
} else {
type = USTYPE_SMB_USR;
err = sid_to_id(sid, B_TRUE, &id);
}
if (err == 0) {
rid = id;
if (!cb->cb_sid2posix) {
e = directory_name_from_sid(NULL, sid, &name,
&classes);
if (e != NULL)
directory_error_free(e);
if (name == NULL)
name = sid;
}
}
#else
nvlist_free(props);
free(node);
return (-1);
#endif /* HAVE_IDMAP */
2009-07-03 02:44:48 +04:00
}
if (cb->cb_sid2posix || domain == NULL || domain[0] == '\0') {
/* POSIX or -i */
if (zfs_prop_is_group(prop)) {
type = USTYPE_PSX_GRP;
if (!cb->cb_numname) {
struct group *g;
if ((g = getgrgid(rid)) != NULL)
name = g->gr_name;
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else if (zfs_prop_is_user(prop)) {
type = USTYPE_PSX_USR;
if (!cb->cb_numname) {
struct passwd *p;
if ((p = getpwuid(rid)) != NULL)
name = p->pw_name;
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else {
type = USTYPE_PROJ;
}
}
/*
* Make sure that the type/name combination is unique when doing
* SID to POSIX ID translation (hence changing the type from SMB to
* POSIX).
*/
if (cb->cb_sid2posix &&
nvlist_add_boolean_value(props, "smbentity", smbentity) != 0)
nomem();
/* Calculate/update width of TYPE field */
typestr = us_type2str(type);
typelen = strlen(gettext(typestr));
typeidx = us_field_index("type");
if (typelen > cb->cb_width[typeidx])
cb->cb_width[typeidx] = typelen;
if (nvlist_add_uint32(props, "type", type) != 0)
nomem();
/* Calculate/update width of NAME field */
if ((cb->cb_numname && cb->cb_sid2posix) || name == NULL) {
if (nvlist_add_uint64(props, "name", rid) != 0)
nomem();
namelen = snprintf(NULL, 0, "%u", rid);
} else {
if (nvlist_add_string(props, "name", name) != 0)
nomem();
namelen = strlen(name);
}
nameidx = us_field_index("name");
if (nameidx >= 0 && namelen > cb->cb_width[nameidx])
cb->cb_width[nameidx] = namelen;
/*
* Check if this type/name combination is in the list and update it;
* otherwise add new node to the list.
*/
if ((n = uu_avl_find(avl, node, &sortinfo, &idx)) == NULL) {
uu_avl_insert(avl, node, idx);
} else {
nvlist_free(props);
free(node);
node = n;
props = node->usn_nvl;
2009-07-03 02:44:48 +04:00
}
/* Calculate/update width of USED/QUOTA fields */
if (cb->cb_nicenum) {
if (prop == ZFS_PROP_USERUSED || prop == ZFS_PROP_GROUPUSED ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
prop == ZFS_PROP_USERQUOTA || prop == ZFS_PROP_GROUPQUOTA ||
prop == ZFS_PROP_PROJECTUSED ||
prop == ZFS_PROP_PROJECTQUOTA) {
zfs_nicebytes(space, sizebuf, sizeof (sizebuf));
} else {
zfs_nicenum(space, sizebuf, sizeof (sizebuf));
}
} else {
(void) snprintf(sizebuf, sizeof (sizebuf), "%llu",
(u_longlong_t)space);
}
sizelen = strlen(sizebuf);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (prop == ZFS_PROP_USERUSED || prop == ZFS_PROP_GROUPUSED ||
prop == ZFS_PROP_PROJECTUSED) {
propname = "used";
if (!nvlist_exists(props, "quota"))
(void) nvlist_add_uint64(props, "quota", 0);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else if (prop == ZFS_PROP_USERQUOTA || prop == ZFS_PROP_GROUPQUOTA ||
prop == ZFS_PROP_PROJECTQUOTA) {
propname = "quota";
if (!nvlist_exists(props, "used"))
(void) nvlist_add_uint64(props, "used", 0);
} else if (prop == ZFS_PROP_USEROBJUSED ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
prop == ZFS_PROP_GROUPOBJUSED || prop == ZFS_PROP_PROJECTOBJUSED) {
propname = "objused";
if (!nvlist_exists(props, "objquota"))
(void) nvlist_add_uint64(props, "objquota", 0);
} else if (prop == ZFS_PROP_USEROBJQUOTA ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
prop == ZFS_PROP_GROUPOBJQUOTA ||
prop == ZFS_PROP_PROJECTOBJQUOTA) {
propname = "objquota";
if (!nvlist_exists(props, "objused"))
(void) nvlist_add_uint64(props, "objused", 0);
} else {
return (-1);
}
sizeidx = us_field_index(propname);
if (sizeidx >= 0 && sizelen > cb->cb_width[sizeidx])
cb->cb_width[sizeidx] = sizelen;
if (nvlist_add_uint64(props, propname, space) != 0)
nomem();
return (0);
}
static void
print_us_node(boolean_t scripted, boolean_t parsable, int *fields, int types,
size_t *width, us_node_t *node)
{
nvlist_t *nvl = node->usn_nvl;
char valstr[MAXNAMELEN];
boolean_t first = B_TRUE;
int cfield = 0;
int field;
uint32_t ustype;
/* Check type */
(void) nvlist_lookup_uint32(nvl, "type", &ustype);
if (!(ustype & types))
return;
while ((field = fields[cfield]) != USFIELD_LAST) {
nvpair_t *nvp = NULL;
data_type_t type;
uint32_t val32 = -1;
uint64_t val64 = -1;
const char *strval = "-";
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL)
if (strcmp(nvpair_name(nvp),
us_field_names[field]) == 0)
break;
type = nvp == NULL ? DATA_TYPE_UNKNOWN : nvpair_type(nvp);
switch (type) {
case DATA_TYPE_UINT32:
val32 = fnvpair_value_uint32(nvp);
break;
case DATA_TYPE_UINT64:
val64 = fnvpair_value_uint64(nvp);
break;
case DATA_TYPE_STRING:
strval = fnvpair_value_string(nvp);
break;
case DATA_TYPE_UNKNOWN:
break;
default:
(void) fprintf(stderr, "invalid data type\n");
}
switch (field) {
case USFIELD_TYPE:
if (type == DATA_TYPE_UINT32)
strval = us_type2str(val32);
break;
case USFIELD_NAME:
if (type == DATA_TYPE_UINT64) {
(void) sprintf(valstr, "%llu",
(u_longlong_t)val64);
strval = valstr;
}
break;
case USFIELD_USED:
case USFIELD_QUOTA:
if (type == DATA_TYPE_UINT64) {
if (parsable) {
(void) sprintf(valstr, "%llu",
(u_longlong_t)val64);
strval = valstr;
} else if (field == USFIELD_QUOTA &&
val64 == 0) {
strval = "none";
} else {
zfs_nicebytes(val64, valstr,
sizeof (valstr));
strval = valstr;
}
}
break;
case USFIELD_OBJUSED:
case USFIELD_OBJQUOTA:
if (type == DATA_TYPE_UINT64) {
if (parsable) {
(void) sprintf(valstr, "%llu",
(u_longlong_t)val64);
strval = valstr;
} else if (field == USFIELD_OBJQUOTA &&
val64 == 0) {
strval = "none";
} else {
zfs_nicenum(val64, valstr,
sizeof (valstr));
strval = valstr;
}
}
break;
}
if (!first) {
if (scripted)
(void) putchar('\t');
else
(void) fputs(" ", stdout);
}
if (scripted)
(void) fputs(strval, stdout);
else if (field == USFIELD_TYPE || field == USFIELD_NAME)
(void) printf("%-*s", (int)width[field], strval);
else
(void) printf("%*s", (int)width[field], strval);
first = B_FALSE;
cfield++;
}
(void) putchar('\n');
}
static void
print_us(boolean_t scripted, boolean_t parsable, int *fields, int types,
size_t *width, boolean_t rmnode, uu_avl_t *avl)
{
us_node_t *node;
const char *col;
int cfield = 0;
int field;
if (!scripted) {
boolean_t first = B_TRUE;
while ((field = fields[cfield]) != USFIELD_LAST) {
col = gettext(us_field_hdr[field]);
if (field == USFIELD_TYPE || field == USFIELD_NAME) {
(void) printf(first ? "%-*s" : " %-*s",
(int)width[field], col);
} else {
(void) printf(first ? "%*s" : " %*s",
(int)width[field], col);
}
first = B_FALSE;
cfield++;
}
(void) printf("\n");
}
for (node = uu_avl_first(avl); node; node = uu_avl_next(avl, node)) {
print_us_node(scripted, parsable, fields, types, width, node);
if (rmnode)
nvlist_free(node->usn_nvl);
}
}
2009-07-03 02:44:48 +04:00
static int
zfs_do_userspace(int argc, char **argv)
{
zfs_handle_t *zhp;
zfs_userquota_prop_t p;
uu_avl_pool_t *avl_pool;
uu_avl_t *avl_tree;
uu_avl_walk_t *walk;
char *delim;
char deffields[] = "type,name,used,quota,objused,objquota";
char *ofield = NULL;
char *tfield = NULL;
int cfield = 0;
int fields[256];
int i;
boolean_t scripted = B_FALSE;
boolean_t prtnum = B_FALSE;
boolean_t parsable = B_FALSE;
boolean_t sid2posix = B_FALSE;
int ret = 0;
int c;
zfs_sort_column_t *sortcol = NULL;
int types = USTYPE_PSX_USR | USTYPE_SMB_USR;
us_cbdata_t cb;
us_node_t *node;
us_node_t *rmnode;
uu_list_pool_t *listpool;
uu_list_t *list;
uu_avl_index_t idx = 0;
uu_list_index_t idx2 = 0;
if (argc < 2)
usage(B_FALSE);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (strcmp(argv[0], "groupspace") == 0) {
/* Toggle default group types */
types = USTYPE_PSX_GRP | USTYPE_SMB_GRP;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
} else if (strcmp(argv[0], "projectspace") == 0) {
types = USTYPE_PROJ;
prtnum = B_TRUE;
}
while ((c = getopt(argc, argv, "nHpo:s:S:t:i")) != -1) {
switch (c) {
case 'n':
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (types == USTYPE_PROJ) {
(void) fprintf(stderr,
gettext("invalid option 'n'\n"));
usage(B_FALSE);
}
prtnum = B_TRUE;
break;
case 'H':
scripted = B_TRUE;
break;
case 'p':
parsable = B_TRUE;
break;
case 'o':
ofield = optarg;
break;
case 's':
case 'S':
if (zfs_add_sort_column(&sortcol, optarg,
c == 's' ? B_FALSE : B_TRUE) != 0) {
(void) fprintf(stderr,
gettext("invalid field '%s'\n"), optarg);
usage(B_FALSE);
}
break;
case 't':
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (types == USTYPE_PROJ) {
(void) fprintf(stderr,
gettext("invalid option 't'\n"));
usage(B_FALSE);
}
tfield = optarg;
break;
case 'i':
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (types == USTYPE_PROJ) {
(void) fprintf(stderr,
gettext("invalid option 'i'\n"));
usage(B_FALSE);
}
sid2posix = B_TRUE;
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (argc < 1) {
(void) fprintf(stderr, gettext("missing dataset name\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
/* Use default output fields if not specified using -o */
if (ofield == NULL)
ofield = deffields;
do {
if ((delim = strchr(ofield, ',')) != NULL)
*delim = '\0';
if ((fields[cfield++] = us_field_index(ofield)) == -1) {
(void) fprintf(stderr, gettext("invalid type '%s' "
"for -o option\n"), ofield);
return (-1);
}
if (delim != NULL)
ofield = delim + 1;
} while (delim != NULL);
fields[cfield] = USFIELD_LAST;
/* Override output types (-t option) */
if (tfield != NULL) {
types = 0;
do {
boolean_t found = B_FALSE;
if ((delim = strchr(tfield, ',')) != NULL)
*delim = '\0';
for (i = 0; i < sizeof (us_type_bits) / sizeof (int);
i++) {
if (strcmp(tfield, us_type_names[i]) == 0) {
found = B_TRUE;
types |= us_type_bits[i];
break;
}
}
if (!found) {
(void) fprintf(stderr, gettext("invalid type "
"'%s' for -t option\n"), tfield);
return (-1);
}
if (delim != NULL)
tfield = delim + 1;
} while (delim != NULL);
}
2009-07-03 02:44:48 +04:00
if ((zhp = zfs_path_to_zhandle(g_zfs, argv[0], ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_SNAPSHOT)) == NULL)
2009-07-03 02:44:48 +04:00
return (1);
if (zfs_get_underlying_type(zhp) != ZFS_TYPE_FILESYSTEM) {
(void) fprintf(stderr, gettext("operation is only applicable "
"to filesystems and their snapshots\n"));
zfs_close(zhp);
return (1);
}
2009-07-03 02:44:48 +04:00
if ((avl_pool = uu_avl_pool_create("us_avl_pool", sizeof (us_node_t),
offsetof(us_node_t, usn_avlnode), us_compare, UU_DEFAULT)) == NULL)
nomem();
if ((avl_tree = uu_avl_create(avl_pool, NULL, UU_DEFAULT)) == NULL)
nomem();
/* Always add default sorting columns */
(void) zfs_add_sort_column(&sortcol, "type", B_FALSE);
(void) zfs_add_sort_column(&sortcol, "name", B_FALSE);
cb.cb_sortcol = sortcol;
cb.cb_numname = prtnum;
cb.cb_nicenum = !parsable;
cb.cb_avl_pool = avl_pool;
cb.cb_avl = avl_tree;
cb.cb_sid2posix = sid2posix;
for (i = 0; i < USFIELD_LAST; i++)
cb.cb_width[i] = strlen(gettext(us_field_hdr[i]));
2009-07-03 02:44:48 +04:00
for (p = 0; p < ZFS_NUM_USERQUOTA_PROPS; p++) {
if ((zfs_prop_is_user(p) &&
!(types & (USTYPE_PSX_USR | USTYPE_SMB_USR))) ||
(zfs_prop_is_group(p) &&
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
!(types & (USTYPE_PSX_GRP | USTYPE_SMB_GRP))) ||
(zfs_prop_is_project(p) && types != USTYPE_PROJ))
continue;
cb.cb_prop = p;
if ((ret = zfs_userspace(zhp, p, userspace_cb, &cb)) != 0) {
zfs_close(zhp);
return (ret);
}
2009-07-03 02:44:48 +04:00
}
zfs_close(zhp);
/* Sort the list */
if ((node = uu_avl_first(avl_tree)) == NULL)
return (0);
us_populated = B_TRUE;
listpool = uu_list_pool_create("tmplist", sizeof (us_node_t),
offsetof(us_node_t, usn_listnode), NULL, UU_DEFAULT);
list = uu_list_create(listpool, NULL, UU_DEFAULT);
uu_list_node_init(node, &node->usn_listnode, listpool);
while (node != NULL) {
rmnode = node;
node = uu_avl_next(avl_tree, node);
uu_avl_remove(avl_tree, rmnode);
if (uu_list_find(list, rmnode, NULL, &idx2) == NULL)
uu_list_insert(list, rmnode, idx2);
}
for (node = uu_list_first(list); node != NULL;
node = uu_list_next(list, node)) {
us_sort_info_t sortinfo = { sortcol, cb.cb_numname };
if (uu_avl_find(avl_tree, node, &sortinfo, &idx) == NULL)
uu_avl_insert(avl_tree, node, idx);
}
uu_list_destroy(list);
uu_list_pool_destroy(listpool);
/* Print and free node nvlist memory */
print_us(scripted, parsable, fields, types, cb.cb_width, B_TRUE,
cb.cb_avl);
zfs_free_sort_columns(sortcol);
/* Clean up the AVL tree */
if ((walk = uu_avl_walk_start(cb.cb_avl, UU_WALK_ROBUST)) == NULL)
nomem();
while ((node = uu_avl_walk_next(walk)) != NULL) {
uu_avl_remove(cb.cb_avl, node);
free(node);
}
uu_avl_walk_end(walk);
uu_avl_destroy(avl_tree);
uu_avl_pool_destroy(avl_pool);
return (ret);
2009-07-03 02:44:48 +04:00
}
/*
* list [-Hp][-r|-d max] [-o property[,...]] [-s property] ... [-S property]
* [-t type[,...]] [filesystem|volume|snapshot] ...
2008-11-20 23:01:55 +03:00
*
* -H Scripted mode; elide headers and separate columns by tabs
* -p Display values in parsable (literal) format.
* -r Recurse over all children
* -d Limit recursion by depth.
* -o Control which fields to display.
2008-11-20 23:01:55 +03:00
* -s Specify sort columns, descending order.
* -S Specify sort columns, ascending order.
* -t Control which object types to display.
2008-11-20 23:01:55 +03:00
*
* When given no arguments, list all filesystems in the system.
2008-11-20 23:01:55 +03:00
* Otherwise, list the specified datasets, optionally recursing down them if
* '-r' is specified.
*/
typedef struct list_cbdata {
boolean_t cb_first;
boolean_t cb_literal;
2008-11-20 23:01:55 +03:00
boolean_t cb_scripted;
zprop_list_t *cb_proplist;
} list_cbdata_t;
/*
* Given a list of columns to display, output appropriate headers for each one.
*/
static void
print_header(list_cbdata_t *cb)
2008-11-20 23:01:55 +03:00
{
zprop_list_t *pl = cb->cb_proplist;
2008-11-20 23:01:55 +03:00
char headerbuf[ZFS_MAXPROPLEN];
const char *header;
int i;
boolean_t first = B_TRUE;
boolean_t right_justify;
for (; pl != NULL; pl = pl->pl_next) {
if (!first) {
(void) printf(" ");
} else {
first = B_FALSE;
}
right_justify = B_FALSE;
if (pl->pl_prop != ZPROP_USERPROP) {
2008-11-20 23:01:55 +03:00
header = zfs_prop_column_name(pl->pl_prop);
right_justify = zfs_prop_align_right(pl->pl_prop);
} else {
for (i = 0; pl->pl_user_prop[i] != '\0'; i++)
headerbuf[i] = toupper(pl->pl_user_prop[i]);
headerbuf[i] = '\0';
header = headerbuf;
}
if (pl->pl_next == NULL && !right_justify)
(void) printf("%s", header);
else if (right_justify)
(void) printf("%*s", (int)pl->pl_width, header);
2008-11-20 23:01:55 +03:00
else
(void) printf("%-*s", (int)pl->pl_width, header);
2008-11-20 23:01:55 +03:00
}
(void) printf("\n");
}
/*
* Given a dataset and a list of fields, print out all the properties according
* to the described layout.
*/
static void
print_dataset(zfs_handle_t *zhp, list_cbdata_t *cb)
2008-11-20 23:01:55 +03:00
{
zprop_list_t *pl = cb->cb_proplist;
2008-11-20 23:01:55 +03:00
boolean_t first = B_TRUE;
char property[ZFS_MAXPROPLEN];
nvlist_t *userprops = zfs_get_user_props(zhp);
nvlist_t *propval;
const char *propstr;
2008-11-20 23:01:55 +03:00
boolean_t right_justify;
for (; pl != NULL; pl = pl->pl_next) {
if (!first) {
if (cb->cb_scripted)
(void) putchar('\t');
2008-11-20 23:01:55 +03:00
else
(void) fputs(" ", stdout);
2008-11-20 23:01:55 +03:00
} else {
first = B_FALSE;
}
if (pl->pl_prop == ZFS_PROP_NAME) {
(void) strlcpy(property, zfs_get_name(zhp),
sizeof (property));
propstr = property;
right_justify = zfs_prop_align_right(pl->pl_prop);
} else if (pl->pl_prop != ZPROP_USERPROP) {
2008-11-20 23:01:55 +03:00
if (zfs_prop_get(zhp, pl->pl_prop, property,
sizeof (property), NULL, NULL, 0,
cb->cb_literal) != 0)
2008-11-20 23:01:55 +03:00
propstr = "-";
else
propstr = property;
right_justify = zfs_prop_align_right(pl->pl_prop);
2009-07-03 02:44:48 +04:00
} else if (zfs_prop_userquota(pl->pl_user_prop)) {
if (zfs_prop_get_userquota(zhp, pl->pl_user_prop,
property, sizeof (property), cb->cb_literal) != 0)
2009-07-03 02:44:48 +04:00
propstr = "-";
else
propstr = property;
right_justify = B_TRUE;
} else if (zfs_prop_written(pl->pl_user_prop)) {
if (zfs_prop_get_written(zhp, pl->pl_user_prop,
property, sizeof (property), cb->cb_literal) != 0)
propstr = "-";
else
propstr = property;
right_justify = B_TRUE;
2008-11-20 23:01:55 +03:00
} else {
if (nvlist_lookup_nvlist(userprops,
pl->pl_user_prop, &propval) != 0)
propstr = "-";
else
propstr = fnvlist_lookup_string(propval,
ZPROP_VALUE);
2009-07-03 02:44:48 +04:00
right_justify = B_FALSE;
2008-11-20 23:01:55 +03:00
}
/*
* If this is being called in scripted mode, or if this is the
* last column and it is left-justified, don't include a width
* format specifier.
*/
if (cb->cb_scripted || (pl->pl_next == NULL && !right_justify))
(void) fputs(propstr, stdout);
2008-11-20 23:01:55 +03:00
else if (right_justify)
(void) printf("%*s", (int)pl->pl_width, propstr);
2008-11-20 23:01:55 +03:00
else
(void) printf("%-*s", (int)pl->pl_width, propstr);
2008-11-20 23:01:55 +03:00
}
(void) putchar('\n');
2008-11-20 23:01:55 +03:00
}
/*
* Generic callback function to list a dataset or snapshot.
*/
static int
list_callback(zfs_handle_t *zhp, void *data)
{
list_cbdata_t *cbp = data;
if (cbp->cb_first) {
if (!cbp->cb_scripted)
print_header(cbp);
2008-11-20 23:01:55 +03:00
cbp->cb_first = B_FALSE;
}
print_dataset(zhp, cbp);
2008-11-20 23:01:55 +03:00
return (0);
}
static int
zfs_do_list(int argc, char **argv)
{
int c;
char default_fields[] =
2008-11-20 23:01:55 +03:00
"name,used,available,referenced,mountpoint";
2009-02-18 23:51:31 +03:00
int types = ZFS_TYPE_DATASET;
boolean_t types_specified = B_FALSE;
char *fields = default_fields;
2008-11-20 23:01:55 +03:00
list_cbdata_t cb = { 0 };
2009-07-03 02:44:48 +04:00
int limit = 0;
int ret = 0;
2008-11-20 23:01:55 +03:00
zfs_sort_column_t *sortcol = NULL;
int flags = ZFS_ITER_PROP_LISTSNAPS | ZFS_ITER_ARGS_CAN_BE_PATHS;
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "HS:d:o:prs:t:")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'o':
fields = optarg;
break;
case 'p':
cb.cb_literal = B_TRUE;
flags |= ZFS_ITER_LITERAL_PROPS;
break;
2009-07-03 02:44:48 +04:00
case 'd':
limit = parse_depth(optarg, &flags);
break;
2008-11-20 23:01:55 +03:00
case 'r':
flags |= ZFS_ITER_RECURSE;
2008-11-20 23:01:55 +03:00
break;
case 'H':
cb.cb_scripted = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 's':
if (zfs_add_sort_column(&sortcol, optarg,
B_FALSE) != 0) {
(void) fprintf(stderr,
gettext("invalid property '%s'\n"), optarg);
usage(B_FALSE);
}
break;
case 'S':
if (zfs_add_sort_column(&sortcol, optarg,
B_TRUE) != 0) {
(void) fprintf(stderr,
gettext("invalid property '%s'\n"), optarg);
usage(B_FALSE);
}
break;
case 't':
types = 0;
types_specified = B_TRUE;
flags &= ~ZFS_ITER_PROP_LISTSNAPS;
for (char *tok; (tok = strsep(&optarg, ",")); ) {
static const char *const type_subopts[] = {
"filesystem", "volume",
"snapshot", "snap",
"bookmark",
"all" };
static const int type_types[] = {
ZFS_TYPE_FILESYSTEM, ZFS_TYPE_VOLUME,
ZFS_TYPE_SNAPSHOT, ZFS_TYPE_SNAPSHOT,
ZFS_TYPE_BOOKMARK,
ZFS_TYPE_DATASET | ZFS_TYPE_BOOKMARK };
for (c = 0; c < ARRAY_SIZE(type_subopts); ++c)
if (strcmp(tok, type_subopts[c]) == 0) {
types |= type_types[c];
goto found3;
}
(void) fprintf(stderr,
gettext("invalid type '%s'\n"), tok);
usage(B_FALSE);
found3:;
2008-11-20 23:01:55 +03:00
}
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/*
* If we are only going to list snapshot names and sort by name or
* by createtxg, then we can use faster version.
*/
if (strcmp(fields, "name") == 0 &&
(zfs_sort_only_by_name(sortcol) ||
zfs_sort_only_by_createtxg(sortcol))) {
flags |= ZFS_ITER_SIMPLE;
}
/*
* If "-o space" and no types were specified, don't display snapshots.
*/
if (strcmp(fields, "space") == 0 && types_specified == B_FALSE)
types &= ~ZFS_TYPE_SNAPSHOT;
2008-11-20 23:01:55 +03:00
/*
* Handle users who want to list all snapshots or bookmarks
* of the current dataset (ex. 'zfs list -t snapshot <dataset>').
*/
if ((types == ZFS_TYPE_SNAPSHOT || types == ZFS_TYPE_BOOKMARK) &&
argc > 0 && (flags & ZFS_ITER_RECURSE) == 0 && limit == 0) {
flags |= (ZFS_ITER_DEPTH_LIMIT | ZFS_ITER_RECURSE);
limit = 1;
}
2008-11-20 23:01:55 +03:00
/*
* If the user specifies '-o all', the zprop_get_list() doesn't
* normally include the name of the dataset. For 'zfs list', we always
* want this property to be first.
*/
if (zprop_get_list(g_zfs, fields, &cb.cb_proplist, ZFS_TYPE_DATASET)
!= 0)
usage(B_FALSE);
cb.cb_first = B_TRUE;
ret = zfs_for_each(argc, argv, flags, types, sortcol, &cb.cb_proplist,
2009-07-03 02:44:48 +04:00
limit, list_callback, &cb);
2008-11-20 23:01:55 +03:00
zprop_free_list(cb.cb_proplist);
zfs_free_sort_columns(sortcol);
if (ret == 0 && cb.cb_first && !cb.cb_scripted)
(void) fprintf(stderr, gettext("no datasets available\n"));
2008-11-20 23:01:55 +03:00
return (ret);
}
/*
* zfs rename [-fu] <fs | snap | vol> <fs | snap | vol>
* zfs rename [-f] -p <fs | vol> <fs | vol>
* zfs rename [-u] -r <snap> <snap>
2008-11-20 23:01:55 +03:00
*
* Renames the given dataset to another of the same type.
*
* The '-p' flag creates all the non-existing ancestors of the target first.
* The '-u' flag prevents file systems from being remounted during rename.
2008-11-20 23:01:55 +03:00
*/
static int
zfs_do_rename(int argc, char **argv)
{
zfs_handle_t *zhp;
renameflags_t flags = { 0 };
2008-11-20 23:01:55 +03:00
int c;
int ret = 0;
int types;
2008-11-20 23:01:55 +03:00
boolean_t parents = B_FALSE;
/* check options */
while ((c = getopt(argc, argv, "pruf")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'p':
parents = B_TRUE;
break;
case 'r':
flags.recursive = B_TRUE;
break;
case 'u':
flags.nounmount = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'f':
flags.forceunmount = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case '?':
default:
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing source dataset "
"argument\n"));
usage(B_FALSE);
}
if (argc < 2) {
(void) fprintf(stderr, gettext("missing target dataset "
"argument\n"));
usage(B_FALSE);
}
if (argc > 2) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
if (flags.recursive && parents) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("-p and -r options are mutually "
"exclusive\n"));
usage(B_FALSE);
}
if (flags.nounmount && parents) {
(void) fprintf(stderr, gettext("-u and -p options are mutually "
"exclusive\n"));
usage(B_FALSE);
}
if (flags.recursive && strchr(argv[0], '@') == 0) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("source dataset for recursive "
"rename must be a snapshot\n"));
usage(B_FALSE);
}
if (flags.nounmount)
types = ZFS_TYPE_FILESYSTEM;
else if (parents)
types = ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME;
else
types = ZFS_TYPE_DATASET;
if ((zhp = zfs_open(g_zfs, argv[0], types)) == NULL)
2008-11-20 23:01:55 +03:00
return (1);
/* If we were asked and the name looks good, try to create ancestors. */
if (parents && zfs_name_valid(argv[1], zfs_get_type(zhp)) &&
zfs_create_ancestors(g_zfs, argv[1]) != 0) {
zfs_close(zhp);
return (1);
}
ret = (zfs_rename(zhp, argv[1], flags) != 0);
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
return (ret);
}
/*
* zfs promote <fs>
*
* Promotes the given clone fs to be the parent
*/
static int
zfs_do_promote(int argc, char **argv)
{
zfs_handle_t *zhp;
int ret = 0;
2008-11-20 23:01:55 +03:00
/* check options */
if (argc > 1 && argv[1][0] == '-') {
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
argv[1][1]);
usage(B_FALSE);
}
/* check number of arguments */
if (argc < 2) {
(void) fprintf(stderr, gettext("missing clone filesystem"
" argument\n"));
usage(B_FALSE);
}
if (argc > 2) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
zhp = zfs_open(g_zfs, argv[1], ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL)
return (1);
ret = (zfs_promote(zhp) != 0);
zfs_close(zhp);
return (ret);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
static int
zfs_do_redact(int argc, char **argv)
{
char *snap = NULL;
char *bookname = NULL;
char **rsnaps = NULL;
int numrsnaps = 0;
argv++;
argc--;
if (argc < 3) {
(void) fprintf(stderr, gettext("too few arguments\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
usage(B_FALSE);
}
snap = argv[0];
bookname = argv[1];
rsnaps = argv + 2;
numrsnaps = argc - 2;
nvlist_t *rsnapnv = fnvlist_alloc();
for (int i = 0; i < numrsnaps; i++) {
fnvlist_add_boolean(rsnapnv, rsnaps[i]);
}
int err = lzc_redact(snap, bookname, rsnapnv);
fnvlist_free(rsnapnv);
switch (err) {
case 0:
break;
case ENOENT:
(void) fprintf(stderr,
gettext("provided snapshot %s does not exist\n"), snap);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case EEXIST:
(void) fprintf(stderr, gettext("specified redaction bookmark "
"(%s) provided already exists\n"), bookname);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case ENAMETOOLONG:
(void) fprintf(stderr, gettext("provided bookmark name cannot "
"be used, final name would be too long\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case E2BIG:
(void) fprintf(stderr, gettext("too many redaction snapshots "
"specified\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case EINVAL:
if (strchr(bookname, '#') != NULL)
(void) fprintf(stderr, gettext(
"redaction bookmark name must not contain '#'\n"));
else
(void) fprintf(stderr, gettext(
"redaction snapshot must be descendent of "
"snapshot being redacted\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case EALREADY:
(void) fprintf(stderr, gettext("attempted to redact redacted "
"dataset or with respect to redacted dataset\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case ENOTSUP:
(void) fprintf(stderr, gettext("redaction bookmarks feature "
"not enabled\n"));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
break;
case EXDEV:
(void) fprintf(stderr, gettext("potentially invalid redaction "
"snapshot; full dataset names required\n"));
break;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
default:
(void) fprintf(stderr, gettext("internal error: %s\n"),
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
strerror(errno));
}
return (err);
}
2008-11-20 23:01:55 +03:00
/*
* zfs rollback [-rRf] <snapshot>
*
* -r Delete any intervening snapshots before doing rollback
* -R Delete any snapshots and their clones
* -f ignored for backwards compatibility
2008-11-20 23:01:55 +03:00
*
* Given a filesystem, rollback to a specific snapshot, discarding any changes
* since then and making it the active dataset. If more recent snapshots exist,
* the command will complain unless the '-r' flag is given.
*/
typedef struct rollback_cbdata {
uint64_t cb_create;
uint8_t cb_younger_ds_printed;
2008-11-20 23:01:55 +03:00
boolean_t cb_first;
int cb_doclones;
char *cb_target;
int cb_error;
boolean_t cb_recurse;
} rollback_cbdata_t;
static int
rollback_check_dependent(zfs_handle_t *zhp, void *data)
{
rollback_cbdata_t *cbp = data;
if (cbp->cb_first && cbp->cb_recurse) {
(void) fprintf(stderr, gettext("cannot rollback to "
"'%s': clones of previous snapshots exist\n"),
cbp->cb_target);
(void) fprintf(stderr, gettext("use '-R' to "
"force deletion of the following clones and "
"dependents:\n"));
cbp->cb_first = 0;
cbp->cb_error = 1;
}
(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
zfs_close(zhp);
return (0);
}
2008-11-20 23:01:55 +03:00
/*
* Report some snapshots/bookmarks more recent than the one specified.
* Used when '-r' is not specified. We reuse this same callback for the
* snapshot dependents - if 'cb_dependent' is set, then this is a
* dependent and we should report it without checking the transaction group.
2008-11-20 23:01:55 +03:00
*/
static int
rollback_check(zfs_handle_t *zhp, void *data)
{
rollback_cbdata_t *cbp = data;
/*
* Max number of younger snapshots and/or bookmarks to display before
* we stop the iteration.
*/
const uint8_t max_younger = 32;
2008-11-20 23:01:55 +03:00
if (cbp->cb_doclones) {
zfs_close(zhp);
return (0);
}
if (zfs_prop_get_int(zhp, ZFS_PROP_CREATETXG) > cbp->cb_create) {
if (cbp->cb_first && !cbp->cb_recurse) {
(void) fprintf(stderr, gettext("cannot "
"rollback to '%s': more recent snapshots "
"or bookmarks exist\n"),
2008-11-20 23:01:55 +03:00
cbp->cb_target);
(void) fprintf(stderr, gettext("use '-r' to "
"force deletion of the following "
"snapshots and bookmarks:\n"));
2008-11-20 23:01:55 +03:00
cbp->cb_first = 0;
cbp->cb_error = 1;
}
if (cbp->cb_recurse) {
if (zfs_iter_dependents(zhp, B_TRUE,
rollback_check_dependent, cbp) != 0) {
zfs_close(zhp);
return (-1);
}
} else {
(void) fprintf(stderr, "%s\n",
zfs_get_name(zhp));
cbp->cb_younger_ds_printed++;
}
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
if (cbp->cb_younger_ds_printed == max_younger) {
/*
* This non-recursive rollback is going to fail due to the
* presence of snapshots and/or bookmarks that are younger than
* the rollback target.
* We printed some of the offending objects, now we stop
* zfs_iter_snapshot/bookmark iteration so we can fail fast and
* avoid iterating over the rest of the younger objects
*/
(void) fprintf(stderr, gettext("Output limited to %d "
"snapshots/bookmarks\n"), max_younger);
return (-1);
}
2008-11-20 23:01:55 +03:00
return (0);
}
static int
zfs_do_rollback(int argc, char **argv)
{
int ret = 0;
2008-11-20 23:01:55 +03:00
int c;
boolean_t force = B_FALSE;
rollback_cbdata_t cb = { 0 };
zfs_handle_t *zhp, *snap;
char parentname[ZFS_MAX_DATASET_NAME_LEN];
2008-11-20 23:01:55 +03:00
char *delim;
uint64_t min_txg = 0;
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "rRf")) != -1) {
switch (c) {
case 'r':
cb.cb_recurse = 1;
break;
case 'R':
cb.cb_recurse = 1;
cb.cb_doclones = 1;
break;
case 'f':
force = B_TRUE;
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing dataset argument\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
/* open the snapshot */
if ((snap = zfs_open(g_zfs, argv[0], ZFS_TYPE_SNAPSHOT)) == NULL)
return (1);
/* open the parent dataset */
(void) strlcpy(parentname, argv[0], sizeof (parentname));
verify((delim = strrchr(parentname, '@')) != NULL);
*delim = '\0';
if ((zhp = zfs_open(g_zfs, parentname, ZFS_TYPE_DATASET)) == NULL) {
zfs_close(snap);
return (1);
}
/*
* Check for more recent snapshots and/or clones based on the presence
* of '-r' and '-R'.
*/
cb.cb_target = argv[0];
cb.cb_create = zfs_prop_get_int(snap, ZFS_PROP_CREATETXG);
cb.cb_first = B_TRUE;
cb.cb_error = 0;
if (cb.cb_create > 0)
min_txg = cb.cb_create;
if ((ret = zfs_iter_snapshots(zhp, B_FALSE, rollback_check, &cb,
min_txg, 0)) != 0)
goto out;
if ((ret = zfs_iter_bookmarks(zhp, rollback_check, &cb)) != 0)
2008-11-20 23:01:55 +03:00
goto out;
if ((ret = cb.cb_error) != 0)
goto out;
/*
* Rollback parent to the given snapshot.
*/
ret = zfs_rollback(zhp, snap, force);
out:
zfs_close(snap);
zfs_close(zhp);
if (ret == 0)
return (0);
else
return (1);
}
/*
* zfs set property=value ... { fs | snap | vol } ...
2008-11-20 23:01:55 +03:00
*
* Sets the given properties for all datasets specified on the command line.
2008-11-20 23:01:55 +03:00
*/
static int
set_callback(zfs_handle_t *zhp, void *data)
{
nvlist_t *props = data;
2008-11-20 23:01:55 +03:00
if (zfs_prop_set_list(zhp, props) != 0) {
2008-11-20 23:01:55 +03:00
switch (libzfs_errno(g_zfs)) {
case EZFS_MOUNTFAILED:
(void) fprintf(stderr, gettext("property may be set "
"but unable to remount filesystem\n"));
break;
case EZFS_SHARENFSFAILED:
(void) fprintf(stderr, gettext("property may be set "
"but unable to reshare filesystem\n"));
break;
}
return (1);
}
return (0);
}
static int
zfs_do_set(int argc, char **argv)
{
nvlist_t *props = NULL;
int ds_start = -1; /* argv idx of first dataset arg */
int ret = 0;
int i;
2008-11-20 23:01:55 +03:00
/* check for options */
if (argc > 1 && argv[1][0] == '-') {
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
argv[1][1]);
usage(B_FALSE);
}
/* check number of arguments */
if (argc < 2) {
(void) fprintf(stderr, gettext("missing arguments\n"));
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
}
if (argc < 3) {
if (strchr(argv[1], '=') == NULL) {
(void) fprintf(stderr, gettext("missing property=value "
"argument(s)\n"));
} else {
(void) fprintf(stderr, gettext("missing dataset "
"name(s)\n"));
}
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
}
/* validate argument order: prop=val args followed by dataset args */
for (i = 1; i < argc; i++) {
if (strchr(argv[i], '=') != NULL) {
if (ds_start > 0) {
/* out-of-order prop=val argument */
(void) fprintf(stderr, gettext("invalid "
"argument order\n"));
usage(B_FALSE);
}
} else if (ds_start < 0) {
ds_start = i;
}
}
if (ds_start < 0) {
(void) fprintf(stderr, gettext("missing dataset name(s)\n"));
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
}
/* Populate a list of property settings */
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
for (i = 1; i < ds_start; i++) {
if (!parseprop(props, argv[i])) {
ret = -1;
goto error;
}
2008-11-20 23:01:55 +03:00
}
ret = zfs_for_each(argc - ds_start, argv + ds_start, 0,
ZFS_TYPE_DATASET, NULL, NULL, 0, set_callback, props);
2008-11-20 23:01:55 +03:00
error:
nvlist_free(props);
2008-11-20 23:01:55 +03:00
return (ret);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
typedef struct snap_cbdata {
nvlist_t *sd_nvl;
boolean_t sd_recursive;
const char *sd_snapname;
} snap_cbdata_t;
static int
zfs_snapshot_cb(zfs_handle_t *zhp, void *arg)
{
snap_cbdata_t *sd = arg;
char *name;
int rv = 0;
int error;
if (sd->sd_recursive &&
zfs_prop_get_int(zhp, ZFS_PROP_INCONSISTENT) != 0) {
zfs_close(zhp);
return (0);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
error = asprintf(&name, "%s@%s", zfs_get_name(zhp), sd->sd_snapname);
if (error == -1)
nomem();
fnvlist_add_boolean(sd->sd_nvl, name);
free(name);
if (sd->sd_recursive)
rv = zfs_iter_filesystems(zhp, zfs_snapshot_cb, sd);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
zfs_close(zhp);
return (rv);
}
2008-11-20 23:01:55 +03:00
/*
* zfs snapshot [-r] [-o prop=value] ... <fs@snap>
2008-11-20 23:01:55 +03:00
*
* Creates a snapshot with the given name. While functionally equivalent to
* 'zfs create', it is a separate command to differentiate intent.
*/
static int
zfs_do_snapshot(int argc, char **argv)
{
int ret = 0;
int c;
nvlist_t *props;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
snap_cbdata_t sd = { 0 };
boolean_t multiple_snaps = B_FALSE;
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (nvlist_alloc(&sd.sd_nvl, NV_UNIQUE_NAME, 0) != 0)
nomem();
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt(argc, argv, "ro:")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'o':
if (!parseprop(props, optarg)) {
nvlist_free(sd.sd_nvl);
nvlist_free(props);
return (1);
}
break;
2008-11-20 23:01:55 +03:00
case 'r':
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
sd.sd_recursive = B_TRUE;
multiple_snaps = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
goto usage;
2008-11-20 23:01:55 +03:00
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing snapshot argument\n"));
goto usage;
2008-11-20 23:01:55 +03:00
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (argc > 1)
multiple_snaps = B_TRUE;
for (; argc > 0; argc--, argv++) {
char *atp;
zfs_handle_t *zhp;
atp = strchr(argv[0], '@');
if (atp == NULL)
goto usage;
*atp = '\0';
sd.sd_snapname = atp + 1;
zhp = zfs_open(g_zfs, argv[0],
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL)
goto usage;
if (zfs_snapshot_cb(zhp, &sd) != 0)
goto usage;
2008-11-20 23:01:55 +03:00
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
ret = zfs_snapshot_nvl(g_zfs, sd.sd_nvl, props);
nvlist_free(sd.sd_nvl);
nvlist_free(props);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (ret != 0 && multiple_snaps)
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("no snapshots were created\n"));
return (ret != 0);
usage:
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
nvlist_free(sd.sd_nvl);
nvlist_free(props);
usage(B_FALSE);
return (-1);
2008-11-20 23:01:55 +03:00
}
/*
* Array of prefixes to exclude
* a linear search, even if executed for each dataset,
* is plenty good enough.
*/
typedef struct zfs_send_exclude_arg {
size_t count;
const char **list;
} zfs_send_exclude_arg_t;
static boolean_t
zfs_do_send_exclude(zfs_handle_t *zhp, void *context)
{
zfs_send_exclude_arg_t *excludes = context;
const char *name = zfs_get_name(zhp);
for (size_t i = 0; i < excludes->count; ++i) {
size_t len = strlen(excludes->list[i]);
if (strncmp(name, excludes->list[i], len) == 0 &&
memchr("/@", name[len], sizeof ("/@")))
return (B_FALSE);
}
return (B_TRUE);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
2008-11-20 23:01:55 +03:00
/*
* Send a backup stream to stdout.
*/
static int
zfs_do_send(int argc, char **argv)
{
char *fromname = NULL;
char *toname = NULL;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
char *resume_token = NULL;
2008-11-20 23:01:55 +03:00
char *cp;
zfs_handle_t *zhp;
sendflags_t flags = { 0 };
2008-11-20 23:01:55 +03:00
int c, err;
nvlist_t *dbgnv = NULL;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
char *redactbook = NULL;
zfs_send_exclude_arg_t excludes = { 0 };
2008-11-20 23:01:55 +03:00
struct option long_options[] = {
{"replicate", no_argument, NULL, 'R'},
{"skip-missing", no_argument, NULL, 's'},
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
{"redact", required_argument, NULL, 'd'},
{"props", no_argument, NULL, 'p'},
{"parsable", no_argument, NULL, 'P'},
{"dedup", no_argument, NULL, 'D'},
{"verbose", no_argument, NULL, 'v'},
{"dryrun", no_argument, NULL, 'n'},
{"large-block", no_argument, NULL, 'L'},
{"embed", no_argument, NULL, 'e'},
{"resume", required_argument, NULL, 't'},
{"compressed", no_argument, NULL, 'c'},
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
{"raw", no_argument, NULL, 'w'},
{"backup", no_argument, NULL, 'b'},
{"holds", no_argument, NULL, 'h'},
{"saved", no_argument, NULL, 'S'},
{"exclude", required_argument, NULL, 'X'},
{0, 0, 0, 0}
};
2008-11-20 23:01:55 +03:00
/* check options */
while ((c = getopt_long(argc, argv, ":i:I:RsDpvnPLeht:cwbd:SX:",
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
long_options, NULL)) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'X':
for (char *ds; (ds = strsep(&optarg, ",")) != NULL; ) {
if (!zfs_name_valid(ds, ZFS_TYPE_DATASET) ||
strchr(ds, '/') == NULL) {
(void) fprintf(stderr, gettext("-X %s: "
"not a valid non-root dataset name"
".\n"), ds);
usage(B_FALSE);
}
excludes.list = safe_realloc(excludes.list,
sizeof (char *) * (excludes.count + 1));
excludes.list[excludes.count++] = ds;
}
break;
2008-11-20 23:01:55 +03:00
case 'i':
if (fromname)
usage(B_FALSE);
fromname = optarg;
break;
case 'I':
if (fromname)
usage(B_FALSE);
fromname = optarg;
flags.doall = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'R':
flags.replicate = B_TRUE;
break;
case 's':
flags.skipmissing = B_TRUE;
break;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case 'd':
redactbook = optarg;
break;
case 'p':
flags.props = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'b':
flags.backup = B_TRUE;
break;
case 'h':
flags.holds = B_TRUE;
break;
case 'P':
flags.parsable = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case 'v':
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
flags.verbosity++;
flags.progress = B_TRUE;
break;
case 'D':
(void) fprintf(stderr,
gettext("WARNING: deduplicated send is no "
"longer supported. A regular,\n"
"non-deduplicated stream will be generated.\n\n"));
2008-11-20 23:01:55 +03:00
break;
case 'n':
flags.dryrun = B_TRUE;
break;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
case 'L':
flags.largeblock = B_TRUE;
break;
case 'e':
flags.embed_data = B_TRUE;
break;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
case 't':
resume_token = optarg;
break;
case 'c':
flags.compress = B_TRUE;
break;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case 'w':
flags.raw = B_TRUE;
flags.compress = B_TRUE;
flags.embed_data = B_TRUE;
flags.largeblock = B_TRUE;
break;
case 'S':
flags.saved = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case ':':
2017-02-01 01:41:23 +03:00
/*
* If a parameter was not passed, optopt contains the
* value that would normally lead us into the
* appropriate case statement. If it's > 256, then this
* must be a longopt and we should look at argv to get
* the string. Otherwise it's just the character, so we
* should use it directly.
*/
if (optopt <= UINT8_MAX) {
(void) fprintf(stderr,
gettext("missing argument for '%c' "
"option\n"), optopt);
} else {
(void) fprintf(stderr,
gettext("missing argument for '%s' "
"option\n"), argv[optind - 1]);
}
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
break;
case '?':
2017-02-01 01:41:23 +03:00
default:
/*
* If an invalid flag was passed, optopt contains the
* character if it was a short flag, or 0 if it was a
* longopt.
*/
if (optopt != 0) {
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
} else {
(void) fprintf(stderr,
gettext("invalid option '%s'\n"),
argv[optind - 1]);
}
2008-11-20 23:01:55 +03:00
usage(B_FALSE);
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (flags.parsable && flags.verbosity == 0)
flags.verbosity = 1;
if (excludes.count > 0 && !flags.replicate) {
(void) fprintf(stderr, gettext("Cannot specify "
"dataset exclusion (-X) on a non-recursive "
"send.\n"));
return (1);
}
2008-11-20 23:01:55 +03:00
argc -= optind;
argv += optind;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
if (resume_token != NULL) {
if (fromname != NULL || flags.replicate || flags.props ||
flags.backup || flags.holds ||
flags.saved || redactbook != NULL) {
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
(void) fprintf(stderr,
gettext("invalid flags combined with -t\n"));
usage(B_FALSE);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (argc > 0) {
(void) fprintf(stderr, gettext("too many arguments\n"));
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
usage(B_FALSE);
}
} else {
if (argc < 1) {
(void) fprintf(stderr,
gettext("missing snapshot argument\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
2008-11-20 23:01:55 +03:00
}
if (flags.saved) {
if (fromname != NULL || flags.replicate || flags.props ||
flags.doall || flags.backup ||
flags.holds || flags.largeblock || flags.embed_data ||
flags.compress || flags.raw || redactbook != NULL) {
(void) fprintf(stderr, gettext("incompatible flags "
"combined with saved send flag\n"));
usage(B_FALSE);
}
if (strchr(argv[0], '@') != NULL) {
(void) fprintf(stderr, gettext("saved send must "
"specify the dataset with partially-received "
"state\n"));
usage(B_FALSE);
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (flags.raw && redactbook != NULL) {
(void) fprintf(stderr,
gettext("Error: raw sends may not be redacted.\n"));
return (1);
}
if (!flags.dryrun && isatty(STDOUT_FILENO)) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr,
gettext("Error: Stream can not be written to a terminal.\n"
"You must redirect standard output.\n"));
return (1);
}
if (flags.saved) {
zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_DATASET);
if (zhp == NULL)
return (1);
err = zfs_send_saved(zhp, &flags, STDOUT_FILENO,
resume_token);
zfs_close(zhp);
return (err != 0);
} else if (resume_token != NULL) {
return (zfs_send_resume(g_zfs, &flags, STDOUT_FILENO,
resume_token));
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
}
if (flags.skipmissing && !flags.replicate) {
(void) fprintf(stderr,
gettext("skip-missing flag can only be used in "
"conjunction with replicate\n"));
usage(B_FALSE);
}
/*
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
* For everything except -R and -I, use the new, cleaner code path.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (!(flags.replicate || flags.doall)) {
char frombuf[ZFS_MAX_DATASET_NAME_LEN];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (fromname != NULL && (strchr(fromname, '#') == NULL &&
strchr(fromname, '@') == NULL)) {
/*
* Neither bookmark or snapshot was specified. Print a
* warning, and assume snapshot.
*/
(void) fprintf(stderr, "Warning: incremental source "
"didn't specify type, assuming snapshot. Use '@' "
"or '#' prefix to avoid ambiguity.\n");
(void) snprintf(frombuf, sizeof (frombuf), "@%s",
fromname);
fromname = frombuf;
}
if (fromname != NULL &&
(fromname[0] == '#' || fromname[0] == '@')) {
/*
* Incremental source name begins with # or @.
* Default to same fs as target.
*/
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
char tmpbuf[ZFS_MAX_DATASET_NAME_LEN];
(void) strlcpy(tmpbuf, fromname, sizeof (tmpbuf));
(void) strlcpy(frombuf, argv[0], sizeof (frombuf));
cp = strchr(frombuf, '@');
if (cp != NULL)
*cp = '\0';
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
(void) strlcat(frombuf, tmpbuf, sizeof (frombuf));
fromname = frombuf;
}
zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_DATASET);
if (zhp == NULL)
return (1);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
err = zfs_send_one(zhp, fromname, STDOUT_FILENO, &flags,
redactbook);
zfs_close(zhp);
return (err != 0);
2008-11-20 23:01:55 +03:00
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (fromname != NULL && strchr(fromname, '#')) {
(void) fprintf(stderr,
gettext("Error: multiple snapshots cannot be "
"sent from a bookmark.\n"));
return (1);
}
if (redactbook != NULL) {
(void) fprintf(stderr, gettext("Error: multiple snapshots "
"cannot be sent redacted.\n"));
return (1);
}
if ((cp = strchr(argv[0], '@')) == NULL) {
(void) fprintf(stderr, gettext("Error: "
"Unsupported flag with filesystem or bookmark.\n"));
return (1);
}
*cp = '\0';
toname = cp + 1;
zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL)
return (1);
/*
* If they specified the full path to the snapshot, chop off
* everything except the short name of the snapshot, but special
* case if they specify the origin.
*/
if (fromname && (cp = strchr(fromname, '@')) != NULL) {
char origin[ZFS_MAX_DATASET_NAME_LEN];
undocumented libzfs API changes broke "zfs list" While OpenZFS does permit breaking changes to the libzfs API, we should avoid these changes when reasonably possible, and take steps to mitigate the impact to consumers when changes are necessary. Commit e4288a8397bb1f made a libzfs API change that is especially difficult for consumers because there is no change to the function signatures, only to their behavior. Therefore, consumers can't notice that there was a change at compile time. Also, the API change was incompletely and incorrectly documented. The commit message mentions `zfs_get_prop()` [sic], but all callers of `get_numeric_property()` are impacted: `zfs_prop_get()`, `zfs_prop_get_numeric()`, and `zfs_prop_get_int()`. `zfs_prop_get_int()` always calls `get_numeric_property(src=NULL)`, so it assumes that the filesystem is not mounted. This means that e.g. `zfs_prop_get_int(ZFS_PROP_MOUNTED)` always returns 0. The documentation says that to preserve the previous behavior, callers should initialize `*src=ZPROP_SRC_NONE`, and some callers were changed to do that. However, the existing behavior is actually preserved by initializing `*src=ZPROP_SRC_ALL`, not `NONE`. The code comment above `zfs_prop_get()` says, "src: ... NULL will be treated as ZPROP_SRC_ALL.". However, the code actually treats NULL as ZPROP_SRC_NONE. i.e. `zfs_prop_get(src=NULL)` assumes that the filesystem is not mounted. There are several existing calls which use `src=NULL` which are impacted by the API change, most noticeably those used by `zfs list`, which now assumes that filesystems are not mounted. For example, `zfs list -o name,mounted` previously indicated whether a filesystem was mounted or not, but now it always (incorrectly) indicates that the filesystem is not mounted (`MOUNTED: no`). Similarly, properties that are set at mount time are ignored. E.g. `zfs list -o name,atime` may display an incorrect value if it was set at mount time. To address these problems, this commit reverts commit e4288a8397bb1f: "zfs get: don't lookup mount options when using "-s local"" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11999
2021-05-06 21:24:56 +03:00
zprop_source_t src;
(void) zfs_prop_get(zhp, ZFS_PROP_ORIGIN,
origin, sizeof (origin), &src, NULL, 0, B_FALSE);
if (strcmp(origin, fromname) == 0) {
fromname = NULL;
flags.fromorigin = B_TRUE;
} else {
*cp = '\0';
if (cp != fromname && strcmp(argv[0], fromname)) {
(void) fprintf(stderr,
gettext("incremental source must be "
"in same filesystem\n"));
usage(B_FALSE);
}
fromname = cp + 1;
if (strchr(fromname, '@') || strchr(fromname, '/')) {
(void) fprintf(stderr,
gettext("invalid incremental source\n"));
usage(B_FALSE);
}
}
}
if (flags.replicate && fromname == NULL)
flags.doall = B_TRUE;
err = zfs_send(zhp, fromname, toname, &flags, STDOUT_FILENO,
excludes.count > 0 ? zfs_do_send_exclude : NULL,
&excludes, flags.verbosity >= 3 ? &dbgnv : NULL);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (flags.verbosity >= 3 && dbgnv != NULL) {
/*
* dump_nvlist prints to stdout, but that's been
* redirected to a file. Make it print to stderr
* instead.
*/
(void) dup2(STDERR_FILENO, STDOUT_FILENO);
dump_nvlist(dbgnv, 0);
nvlist_free(dbgnv);
}
zfs_close(zhp);
free(excludes.list);
return (err != 0);
}
/*
* Restore a backup stream from stdin.
*/
static int
zfs_do_receive(int argc, char **argv)
{
int c, err = 0;
recvflags_t flags = { 0 };
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
boolean_t abort_resumable = B_FALSE;
nvlist_t *props;
if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0)
nomem();
/* check options */
while ((c = getopt(argc, argv, ":o:x:dehMnuvFsAc")) != -1) {
switch (c) {
case 'o':
if (!parseprop(props, optarg)) {
nvlist_free(props);
usage(B_FALSE);
}
break;
case 'x':
if (!parsepropname(props, optarg)) {
nvlist_free(props);
usage(B_FALSE);
}
break;
case 'd':
if (flags.istail) {
(void) fprintf(stderr, gettext("invalid option "
"combination: -d and -e are mutually "
"exclusive\n"));
usage(B_FALSE);
}
flags.isprefix = B_TRUE;
break;
case 'e':
if (flags.isprefix) {
(void) fprintf(stderr, gettext("invalid option "
"combination: -d and -e are mutually "
"exclusive\n"));
usage(B_FALSE);
}
flags.istail = B_TRUE;
break;
case 'h':
flags.skipholds = B_TRUE;
break;
case 'M':
flags.forceunmount = B_TRUE;
break;
case 'n':
flags.dryrun = B_TRUE;
break;
case 'u':
flags.nomount = B_TRUE;
break;
case 'v':
flags.verbose = B_TRUE;
break;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
case 's':
flags.resumable = B_TRUE;
break;
case 'F':
flags.force = B_TRUE;
break;
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
case 'A':
abort_resumable = B_TRUE;
break;
case 'c':
flags.heal = B_TRUE;
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* zfs recv -e (use "tail" name) implies -d (remove dataset "head") */
if (flags.istail)
flags.isprefix = B_TRUE;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing snapshot argument\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
if (abort_resumable) {
if (flags.isprefix || flags.istail || flags.dryrun ||
flags.resumable || flags.nomount) {
(void) fprintf(stderr, gettext("invalid option\n"));
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
usage(B_FALSE);
}
char namebuf[ZFS_MAX_DATASET_NAME_LEN];
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
(void) snprintf(namebuf, sizeof (namebuf),
"%s/%%recv", argv[0]);
if (zfs_dataset_exists(g_zfs, namebuf,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME)) {
zfs_handle_t *zhp = zfs_open(g_zfs,
namebuf, ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL) {
nvlist_free(props);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
return (1);
}
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
err = zfs_destroy(zhp, B_FALSE);
zfs_close(zhp);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
} else {
zfs_handle_t *zhp = zfs_open(g_zfs,
argv[0], ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL)
usage(B_FALSE);
if (!zfs_prop_get_int(zhp, ZFS_PROP_INCONSISTENT) ||
zfs_prop_get(zhp, ZFS_PROP_RECEIVE_RESUME_TOKEN,
NULL, 0, NULL, NULL, 0, B_TRUE) == -1) {
(void) fprintf(stderr,
gettext("'%s' does not have any "
"resumable receive state to abort\n"),
argv[0]);
nvlist_free(props);
zfs_close(zhp);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
return (1);
}
err = zfs_destroy(zhp, B_FALSE);
zfs_close(zhp);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
}
nvlist_free(props);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
return (err != 0);
}
if (isatty(STDIN_FILENO)) {
(void) fprintf(stderr,
gettext("Error: Backup stream can not be read "
"from a terminal.\n"
"You must redirect standard input.\n"));
nvlist_free(props);
return (1);
}
err = zfs_receive(g_zfs, argv[0], props, &flags, STDIN_FILENO, NULL);
nvlist_free(props);
return (err != 0);
}
/*
* allow/unallow stuff
*/
/* copied from zfs/sys/dsl_deleg.h */
#define ZFS_DELEG_PERM_CREATE "create"
#define ZFS_DELEG_PERM_DESTROY "destroy"
#define ZFS_DELEG_PERM_SNAPSHOT "snapshot"
#define ZFS_DELEG_PERM_ROLLBACK "rollback"
#define ZFS_DELEG_PERM_CLONE "clone"
#define ZFS_DELEG_PERM_PROMOTE "promote"
#define ZFS_DELEG_PERM_RENAME "rename"
#define ZFS_DELEG_PERM_MOUNT "mount"
#define ZFS_DELEG_PERM_SHARE "share"
#define ZFS_DELEG_PERM_SEND "send"
#define ZFS_DELEG_PERM_RECEIVE "receive"
#define ZFS_DELEG_PERM_ALLOW "allow"
#define ZFS_DELEG_PERM_USERPROP "userprop"
#define ZFS_DELEG_PERM_VSCAN "vscan" /* ??? */
#define ZFS_DELEG_PERM_USERQUOTA "userquota"
#define ZFS_DELEG_PERM_GROUPQUOTA "groupquota"
#define ZFS_DELEG_PERM_USERUSED "userused"
#define ZFS_DELEG_PERM_GROUPUSED "groupused"
#define ZFS_DELEG_PERM_USEROBJQUOTA "userobjquota"
#define ZFS_DELEG_PERM_GROUPOBJQUOTA "groupobjquota"
#define ZFS_DELEG_PERM_USEROBJUSED "userobjused"
#define ZFS_DELEG_PERM_GROUPOBJUSED "groupobjused"
#define ZFS_DELEG_PERM_HOLD "hold"
#define ZFS_DELEG_PERM_RELEASE "release"
#define ZFS_DELEG_PERM_DIFF "diff"
#define ZFS_DELEG_PERM_BOOKMARK "bookmark"
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
#define ZFS_DELEG_PERM_LOAD_KEY "load-key"
#define ZFS_DELEG_PERM_CHANGE_KEY "change-key"
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
#define ZFS_DELEG_PERM_PROJECTUSED "projectused"
#define ZFS_DELEG_PERM_PROJECTQUOTA "projectquota"
#define ZFS_DELEG_PERM_PROJECTOBJUSED "projectobjused"
#define ZFS_DELEG_PERM_PROJECTOBJQUOTA "projectobjquota"
#define ZFS_NUM_DELEG_NOTES ZFS_DELEG_NOTE_NONE
static zfs_deleg_perm_tab_t zfs_deleg_perm_tbl[] = {
{ ZFS_DELEG_PERM_ALLOW, ZFS_DELEG_NOTE_ALLOW },
{ ZFS_DELEG_PERM_CLONE, ZFS_DELEG_NOTE_CLONE },
{ ZFS_DELEG_PERM_CREATE, ZFS_DELEG_NOTE_CREATE },
{ ZFS_DELEG_PERM_DESTROY, ZFS_DELEG_NOTE_DESTROY },
{ ZFS_DELEG_PERM_DIFF, ZFS_DELEG_NOTE_DIFF},
{ ZFS_DELEG_PERM_HOLD, ZFS_DELEG_NOTE_HOLD },
{ ZFS_DELEG_PERM_MOUNT, ZFS_DELEG_NOTE_MOUNT },
{ ZFS_DELEG_PERM_PROMOTE, ZFS_DELEG_NOTE_PROMOTE },
{ ZFS_DELEG_PERM_RECEIVE, ZFS_DELEG_NOTE_RECEIVE },
{ ZFS_DELEG_PERM_RELEASE, ZFS_DELEG_NOTE_RELEASE },
{ ZFS_DELEG_PERM_RENAME, ZFS_DELEG_NOTE_RENAME },
{ ZFS_DELEG_PERM_ROLLBACK, ZFS_DELEG_NOTE_ROLLBACK },
{ ZFS_DELEG_PERM_SEND, ZFS_DELEG_NOTE_SEND },
{ ZFS_DELEG_PERM_SHARE, ZFS_DELEG_NOTE_SHARE },
{ ZFS_DELEG_PERM_SNAPSHOT, ZFS_DELEG_NOTE_SNAPSHOT },
{ ZFS_DELEG_PERM_BOOKMARK, ZFS_DELEG_NOTE_BOOKMARK },
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
{ ZFS_DELEG_PERM_LOAD_KEY, ZFS_DELEG_NOTE_LOAD_KEY },
{ ZFS_DELEG_PERM_CHANGE_KEY, ZFS_DELEG_NOTE_CHANGE_KEY },
{ ZFS_DELEG_PERM_GROUPQUOTA, ZFS_DELEG_NOTE_GROUPQUOTA },
{ ZFS_DELEG_PERM_GROUPUSED, ZFS_DELEG_NOTE_GROUPUSED },
{ ZFS_DELEG_PERM_USERPROP, ZFS_DELEG_NOTE_USERPROP },
{ ZFS_DELEG_PERM_USERQUOTA, ZFS_DELEG_NOTE_USERQUOTA },
{ ZFS_DELEG_PERM_USERUSED, ZFS_DELEG_NOTE_USERUSED },
{ ZFS_DELEG_PERM_USEROBJQUOTA, ZFS_DELEG_NOTE_USEROBJQUOTA },
{ ZFS_DELEG_PERM_USEROBJUSED, ZFS_DELEG_NOTE_USEROBJUSED },
{ ZFS_DELEG_PERM_GROUPOBJQUOTA, ZFS_DELEG_NOTE_GROUPOBJQUOTA },
{ ZFS_DELEG_PERM_GROUPOBJUSED, ZFS_DELEG_NOTE_GROUPOBJUSED },
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
{ ZFS_DELEG_PERM_PROJECTUSED, ZFS_DELEG_NOTE_PROJECTUSED },
{ ZFS_DELEG_PERM_PROJECTQUOTA, ZFS_DELEG_NOTE_PROJECTQUOTA },
{ ZFS_DELEG_PERM_PROJECTOBJUSED, ZFS_DELEG_NOTE_PROJECTOBJUSED },
{ ZFS_DELEG_PERM_PROJECTOBJQUOTA, ZFS_DELEG_NOTE_PROJECTOBJQUOTA },
{ NULL, ZFS_DELEG_NOTE_NONE }
};
/* permission structure */
typedef struct deleg_perm {
zfs_deleg_who_type_t dp_who_type;
const char *dp_name;
boolean_t dp_local;
boolean_t dp_descend;
} deleg_perm_t;
/* */
typedef struct deleg_perm_node {
deleg_perm_t dpn_perm;
uu_avl_node_t dpn_avl_node;
} deleg_perm_node_t;
typedef struct fs_perm fs_perm_t;
/* permissions set */
typedef struct who_perm {
zfs_deleg_who_type_t who_type;
const char *who_name; /* id */
char who_ug_name[256]; /* user/group name */
fs_perm_t *who_fsperm; /* uplink */
uu_avl_t *who_deleg_perm_avl; /* permissions */
} who_perm_t;
/* */
typedef struct who_perm_node {
who_perm_t who_perm;
uu_avl_node_t who_avl_node;
} who_perm_node_t;
typedef struct fs_perm_set fs_perm_set_t;
/* fs permissions */
struct fs_perm {
const char *fsp_name;
uu_avl_t *fsp_sc_avl; /* sets,create */
uu_avl_t *fsp_uge_avl; /* user,group,everyone */
fs_perm_set_t *fsp_set; /* uplink */
};
/* */
typedef struct fs_perm_node {
fs_perm_t fspn_fsperm;
uu_avl_t *fspn_avl;
uu_list_node_t fspn_list_node;
} fs_perm_node_t;
/* top level structure */
struct fs_perm_set {
uu_list_pool_t *fsps_list_pool;
uu_list_t *fsps_list; /* list of fs_perms */
uu_avl_pool_t *fsps_named_set_avl_pool;
uu_avl_pool_t *fsps_who_perm_avl_pool;
uu_avl_pool_t *fsps_deleg_perm_avl_pool;
};
static inline const char *
deleg_perm_type(zfs_deleg_note_t note)
{
/* subcommands */
switch (note) {
/* SUBCOMMANDS */
/* OTHER */
case ZFS_DELEG_NOTE_GROUPQUOTA:
case ZFS_DELEG_NOTE_GROUPUSED:
case ZFS_DELEG_NOTE_USERPROP:
case ZFS_DELEG_NOTE_USERQUOTA:
case ZFS_DELEG_NOTE_USERUSED:
case ZFS_DELEG_NOTE_USEROBJQUOTA:
case ZFS_DELEG_NOTE_USEROBJUSED:
case ZFS_DELEG_NOTE_GROUPOBJQUOTA:
case ZFS_DELEG_NOTE_GROUPOBJUSED:
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case ZFS_DELEG_NOTE_PROJECTUSED:
case ZFS_DELEG_NOTE_PROJECTQUOTA:
case ZFS_DELEG_NOTE_PROJECTOBJUSED:
case ZFS_DELEG_NOTE_PROJECTOBJQUOTA:
/* other */
return (gettext("other"));
default:
return (gettext("subcommand"));
}
}
static int
who_type2weight(zfs_deleg_who_type_t who_type)
{
int res;
switch (who_type) {
case ZFS_DELEG_NAMED_SET_SETS:
case ZFS_DELEG_NAMED_SET:
res = 0;
break;
case ZFS_DELEG_CREATE_SETS:
case ZFS_DELEG_CREATE:
res = 1;
break;
case ZFS_DELEG_USER_SETS:
case ZFS_DELEG_USER:
res = 2;
break;
case ZFS_DELEG_GROUP_SETS:
case ZFS_DELEG_GROUP:
res = 3;
break;
case ZFS_DELEG_EVERYONE_SETS:
case ZFS_DELEG_EVERYONE:
res = 4;
break;
default:
res = -1;
}
return (res);
}
static int
who_perm_compare(const void *larg, const void *rarg, void *unused)
{
(void) unused;
const who_perm_node_t *l = larg;
const who_perm_node_t *r = rarg;
zfs_deleg_who_type_t ltype = l->who_perm.who_type;
zfs_deleg_who_type_t rtype = r->who_perm.who_type;
int lweight = who_type2weight(ltype);
int rweight = who_type2weight(rtype);
int res = lweight - rweight;
if (res == 0)
res = strncmp(l->who_perm.who_name, r->who_perm.who_name,
ZFS_MAX_DELEG_NAME-1);
if (res == 0)
return (0);
if (res > 0)
return (1);
else
return (-1);
}
static int
deleg_perm_compare(const void *larg, const void *rarg, void *unused)
{
(void) unused;
const deleg_perm_node_t *l = larg;
const deleg_perm_node_t *r = rarg;
int res = strncmp(l->dpn_perm.dp_name, r->dpn_perm.dp_name,
ZFS_MAX_DELEG_NAME-1);
if (res == 0)
return (0);
if (res > 0)
return (1);
else
return (-1);
}
static inline void
fs_perm_set_init(fs_perm_set_t *fspset)
{
memset(fspset, 0, sizeof (fs_perm_set_t));
if ((fspset->fsps_list_pool = uu_list_pool_create("fsps_list_pool",
sizeof (fs_perm_node_t), offsetof(fs_perm_node_t, fspn_list_node),
NULL, UU_DEFAULT)) == NULL)
nomem();
if ((fspset->fsps_list = uu_list_create(fspset->fsps_list_pool, NULL,
UU_DEFAULT)) == NULL)
nomem();
if ((fspset->fsps_named_set_avl_pool = uu_avl_pool_create(
"named_set_avl_pool", sizeof (who_perm_node_t), offsetof(
who_perm_node_t, who_avl_node), who_perm_compare,
UU_DEFAULT)) == NULL)
nomem();
if ((fspset->fsps_who_perm_avl_pool = uu_avl_pool_create(
"who_perm_avl_pool", sizeof (who_perm_node_t), offsetof(
who_perm_node_t, who_avl_node), who_perm_compare,
UU_DEFAULT)) == NULL)
nomem();
if ((fspset->fsps_deleg_perm_avl_pool = uu_avl_pool_create(
"deleg_perm_avl_pool", sizeof (deleg_perm_node_t), offsetof(
deleg_perm_node_t, dpn_avl_node), deleg_perm_compare, UU_DEFAULT))
== NULL)
nomem();
}
static inline void fs_perm_fini(fs_perm_t *);
static inline void who_perm_fini(who_perm_t *);
static inline void
fs_perm_set_fini(fs_perm_set_t *fspset)
{
fs_perm_node_t *node = uu_list_first(fspset->fsps_list);
while (node != NULL) {
fs_perm_node_t *next_node =
uu_list_next(fspset->fsps_list, node);
fs_perm_t *fsperm = &node->fspn_fsperm;
fs_perm_fini(fsperm);
uu_list_remove(fspset->fsps_list, node);
free(node);
node = next_node;
}
uu_avl_pool_destroy(fspset->fsps_named_set_avl_pool);
uu_avl_pool_destroy(fspset->fsps_who_perm_avl_pool);
uu_avl_pool_destroy(fspset->fsps_deleg_perm_avl_pool);
}
static inline void
deleg_perm_init(deleg_perm_t *deleg_perm, zfs_deleg_who_type_t type,
const char *name)
{
deleg_perm->dp_who_type = type;
deleg_perm->dp_name = name;
}
static inline void
who_perm_init(who_perm_t *who_perm, fs_perm_t *fsperm,
zfs_deleg_who_type_t type, const char *name)
{
uu_avl_pool_t *pool;
pool = fsperm->fsp_set->fsps_deleg_perm_avl_pool;
memset(who_perm, 0, sizeof (who_perm_t));
if ((who_perm->who_deleg_perm_avl = uu_avl_create(pool, NULL,
UU_DEFAULT)) == NULL)
nomem();
who_perm->who_type = type;
who_perm->who_name = name;
who_perm->who_fsperm = fsperm;
}
static inline void
who_perm_fini(who_perm_t *who_perm)
{
deleg_perm_node_t *node = uu_avl_first(who_perm->who_deleg_perm_avl);
while (node != NULL) {
deleg_perm_node_t *next_node =
uu_avl_next(who_perm->who_deleg_perm_avl, node);
uu_avl_remove(who_perm->who_deleg_perm_avl, node);
free(node);
node = next_node;
}
uu_avl_destroy(who_perm->who_deleg_perm_avl);
}
static inline void
fs_perm_init(fs_perm_t *fsperm, fs_perm_set_t *fspset, const char *fsname)
{
uu_avl_pool_t *nset_pool = fspset->fsps_named_set_avl_pool;
uu_avl_pool_t *who_pool = fspset->fsps_who_perm_avl_pool;
memset(fsperm, 0, sizeof (fs_perm_t));
if ((fsperm->fsp_sc_avl = uu_avl_create(nset_pool, NULL, UU_DEFAULT))
== NULL)
nomem();
if ((fsperm->fsp_uge_avl = uu_avl_create(who_pool, NULL, UU_DEFAULT))
== NULL)
nomem();
fsperm->fsp_set = fspset;
fsperm->fsp_name = fsname;
}
static inline void
fs_perm_fini(fs_perm_t *fsperm)
{
who_perm_node_t *node = uu_avl_first(fsperm->fsp_sc_avl);
while (node != NULL) {
who_perm_node_t *next_node = uu_avl_next(fsperm->fsp_sc_avl,
node);
who_perm_t *who_perm = &node->who_perm;
who_perm_fini(who_perm);
uu_avl_remove(fsperm->fsp_sc_avl, node);
free(node);
node = next_node;
}
node = uu_avl_first(fsperm->fsp_uge_avl);
while (node != NULL) {
who_perm_node_t *next_node = uu_avl_next(fsperm->fsp_uge_avl,
node);
who_perm_t *who_perm = &node->who_perm;
who_perm_fini(who_perm);
uu_avl_remove(fsperm->fsp_uge_avl, node);
free(node);
node = next_node;
}
uu_avl_destroy(fsperm->fsp_sc_avl);
uu_avl_destroy(fsperm->fsp_uge_avl);
}
static void
set_deleg_perm_node(uu_avl_t *avl, deleg_perm_node_t *node,
zfs_deleg_who_type_t who_type, const char *name, char locality)
{
uu_avl_index_t idx = 0;
deleg_perm_node_t *found_node = NULL;
deleg_perm_t *deleg_perm = &node->dpn_perm;
deleg_perm_init(deleg_perm, who_type, name);
if ((found_node = uu_avl_find(avl, node, NULL, &idx))
== NULL)
uu_avl_insert(avl, node, idx);
else {
node = found_node;
deleg_perm = &node->dpn_perm;
}
switch (locality) {
case ZFS_DELEG_LOCAL:
deleg_perm->dp_local = B_TRUE;
break;
case ZFS_DELEG_DESCENDENT:
deleg_perm->dp_descend = B_TRUE;
break;
case ZFS_DELEG_NA:
break;
default:
assert(B_FALSE); /* invalid locality */
}
}
static inline int
parse_who_perm(who_perm_t *who_perm, nvlist_t *nvl, char locality)
{
nvpair_t *nvp = NULL;
fs_perm_set_t *fspset = who_perm->who_fsperm->fsp_set;
uu_avl_t *avl = who_perm->who_deleg_perm_avl;
zfs_deleg_who_type_t who_type = who_perm->who_type;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
const char *name = nvpair_name(nvp);
data_type_t type = nvpair_type(nvp);
uu_avl_pool_t *avl_pool = fspset->fsps_deleg_perm_avl_pool;
deleg_perm_node_t *node =
safe_malloc(sizeof (deleg_perm_node_t));
VERIFY(type == DATA_TYPE_BOOLEAN);
uu_avl_node_init(node, &node->dpn_avl_node, avl_pool);
set_deleg_perm_node(avl, node, who_type, name, locality);
}
return (0);
}
static inline int
parse_fs_perm(fs_perm_t *fsperm, nvlist_t *nvl)
{
nvpair_t *nvp = NULL;
fs_perm_set_t *fspset = fsperm->fsp_set;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
nvlist_t *nvl2 = NULL;
const char *name = nvpair_name(nvp);
uu_avl_t *avl = NULL;
uu_avl_pool_t *avl_pool = NULL;
zfs_deleg_who_type_t perm_type = name[0];
char perm_locality = name[1];
const char *perm_name = name + 3;
who_perm_t *who_perm = NULL;
assert('$' == name[2]);
if (nvpair_value_nvlist(nvp, &nvl2) != 0)
return (-1);
switch (perm_type) {
case ZFS_DELEG_CREATE:
case ZFS_DELEG_CREATE_SETS:
case ZFS_DELEG_NAMED_SET:
case ZFS_DELEG_NAMED_SET_SETS:
avl_pool = fspset->fsps_named_set_avl_pool;
avl = fsperm->fsp_sc_avl;
break;
case ZFS_DELEG_USER:
case ZFS_DELEG_USER_SETS:
case ZFS_DELEG_GROUP:
case ZFS_DELEG_GROUP_SETS:
case ZFS_DELEG_EVERYONE:
case ZFS_DELEG_EVERYONE_SETS:
avl_pool = fspset->fsps_who_perm_avl_pool;
avl = fsperm->fsp_uge_avl;
break;
default:
assert(!"unhandled zfs_deleg_who_type_t");
}
who_perm_node_t *found_node = NULL;
who_perm_node_t *node = safe_malloc(
sizeof (who_perm_node_t));
who_perm = &node->who_perm;
uu_avl_index_t idx = 0;
uu_avl_node_init(node, &node->who_avl_node, avl_pool);
who_perm_init(who_perm, fsperm, perm_type, perm_name);
if ((found_node = uu_avl_find(avl, node, NULL, &idx))
== NULL) {
if (avl == fsperm->fsp_uge_avl) {
uid_t rid = 0;
struct passwd *p = NULL;
struct group *g = NULL;
const char *nice_name = NULL;
switch (perm_type) {
case ZFS_DELEG_USER_SETS:
case ZFS_DELEG_USER:
rid = atoi(perm_name);
p = getpwuid(rid);
if (p)
nice_name = p->pw_name;
break;
case ZFS_DELEG_GROUP_SETS:
case ZFS_DELEG_GROUP:
rid = atoi(perm_name);
g = getgrgid(rid);
if (g)
nice_name = g->gr_name;
break;
default:
break;
}
if (nice_name != NULL) {
(void) strlcpy(
node->who_perm.who_ug_name,
nice_name, 256);
} else {
/* User or group unknown */
(void) snprintf(
node->who_perm.who_ug_name,
sizeof (node->who_perm.who_ug_name),
"(unknown: %d)", rid);
}
}
uu_avl_insert(avl, node, idx);
} else {
node = found_node;
who_perm = &node->who_perm;
}
assert(who_perm != NULL);
(void) parse_who_perm(who_perm, nvl2, perm_locality);
}
return (0);
}
static inline int
parse_fs_perm_set(fs_perm_set_t *fspset, nvlist_t *nvl)
{
nvpair_t *nvp = NULL;
uu_avl_index_t idx = 0;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
nvlist_t *nvl2 = NULL;
const char *fsname = nvpair_name(nvp);
data_type_t type = nvpair_type(nvp);
fs_perm_t *fsperm = NULL;
fs_perm_node_t *node = safe_malloc(sizeof (fs_perm_node_t));
fsperm = &node->fspn_fsperm;
VERIFY(DATA_TYPE_NVLIST == type);
uu_list_node_init(node, &node->fspn_list_node,
fspset->fsps_list_pool);
idx = uu_list_numnodes(fspset->fsps_list);
fs_perm_init(fsperm, fspset, fsname);
if (nvpair_value_nvlist(nvp, &nvl2) != 0)
return (-1);
(void) parse_fs_perm(fsperm, nvl2);
uu_list_insert(fspset->fsps_list, node, idx);
}
return (0);
}
static inline const char *
deleg_perm_comment(zfs_deleg_note_t note)
{
const char *str = "";
/* subcommands */
switch (note) {
/* SUBCOMMANDS */
case ZFS_DELEG_NOTE_ALLOW:
str = gettext("Must also have the permission that is being"
"\n\t\t\t\tallowed");
break;
case ZFS_DELEG_NOTE_CLONE:
str = gettext("Must also have the 'create' ability and 'mount'"
"\n\t\t\t\tability in the origin file system");
break;
case ZFS_DELEG_NOTE_CREATE:
str = gettext("Must also have the 'mount' ability");
break;
case ZFS_DELEG_NOTE_DESTROY:
str = gettext("Must also have the 'mount' ability");
break;
case ZFS_DELEG_NOTE_DIFF:
str = gettext("Allows lookup of paths within a dataset;"
"\n\t\t\t\tgiven an object number. Ordinary users need this"
"\n\t\t\t\tin order to use zfs diff");
break;
case ZFS_DELEG_NOTE_HOLD:
str = gettext("Allows adding a user hold to a snapshot");
break;
case ZFS_DELEG_NOTE_MOUNT:
str = gettext("Allows mount/umount of ZFS datasets");
break;
case ZFS_DELEG_NOTE_PROMOTE:
str = gettext("Must also have the 'mount'\n\t\t\t\tand"
" 'promote' ability in the origin file system");
break;
case ZFS_DELEG_NOTE_RECEIVE:
str = gettext("Must also have the 'mount' and 'create'"
" ability");
break;
case ZFS_DELEG_NOTE_RELEASE:
str = gettext("Allows releasing a user hold which\n\t\t\t\t"
"might destroy the snapshot");
break;
case ZFS_DELEG_NOTE_RENAME:
str = gettext("Must also have the 'mount' and 'create'"
"\n\t\t\t\tability in the new parent");
break;
case ZFS_DELEG_NOTE_ROLLBACK:
str = gettext("");
break;
case ZFS_DELEG_NOTE_SEND:
str = gettext("");
break;
case ZFS_DELEG_NOTE_SHARE:
str = gettext("Allows sharing file systems over NFS or SMB"
"\n\t\t\t\tprotocols");
break;
case ZFS_DELEG_NOTE_SNAPSHOT:
str = gettext("");
break;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case ZFS_DELEG_NOTE_LOAD_KEY:
str = gettext("Allows loading or unloading an encryption key");
break;
case ZFS_DELEG_NOTE_CHANGE_KEY:
str = gettext("Allows changing or adding an encryption key");
break;
/*
* case ZFS_DELEG_NOTE_VSCAN:
* str = gettext("");
* break;
*/
/* OTHER */
case ZFS_DELEG_NOTE_GROUPQUOTA:
str = gettext("Allows accessing any groupquota@... property");
break;
case ZFS_DELEG_NOTE_GROUPUSED:
str = gettext("Allows reading any groupused@... property");
break;
case ZFS_DELEG_NOTE_USERPROP:
str = gettext("Allows changing any user property");
break;
case ZFS_DELEG_NOTE_USERQUOTA:
str = gettext("Allows accessing any userquota@... property");
break;
case ZFS_DELEG_NOTE_USERUSED:
str = gettext("Allows reading any userused@... property");
break;
case ZFS_DELEG_NOTE_USEROBJQUOTA:
str = gettext("Allows accessing any userobjquota@... property");
break;
case ZFS_DELEG_NOTE_GROUPOBJQUOTA:
str = gettext("Allows accessing any \n\t\t\t\t"
"groupobjquota@... property");
break;
case ZFS_DELEG_NOTE_GROUPOBJUSED:
str = gettext("Allows reading any groupobjused@... property");
break;
case ZFS_DELEG_NOTE_USEROBJUSED:
str = gettext("Allows reading any userobjused@... property");
break;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case ZFS_DELEG_NOTE_PROJECTQUOTA:
str = gettext("Allows accessing any projectquota@... property");
break;
case ZFS_DELEG_NOTE_PROJECTOBJQUOTA:
str = gettext("Allows accessing any \n\t\t\t\t"
"projectobjquota@... property");
break;
case ZFS_DELEG_NOTE_PROJECTUSED:
str = gettext("Allows reading any projectused@... property");
break;
case ZFS_DELEG_NOTE_PROJECTOBJUSED:
str = gettext("Allows accessing any \n\t\t\t\t"
"projectobjused@... property");
break;
/* other */
default:
str = "";
}
return (str);
}
struct allow_opts {
boolean_t local;
boolean_t descend;
boolean_t user;
boolean_t group;
boolean_t everyone;
boolean_t create;
boolean_t set;
boolean_t recursive; /* unallow only */
boolean_t prt_usage;
boolean_t prt_perms;
char *who;
char *perms;
const char *dataset;
};
static inline int
prop_cmp(const void *a, const void *b)
{
const char *str1 = *(const char **)a;
const char *str2 = *(const char **)b;
return (strcmp(str1, str2));
}
static void
allow_usage(boolean_t un, boolean_t requested, const char *msg)
{
const char *opt_desc[] = {
"-h", gettext("show this help message and exit"),
"-l", gettext("set permission locally"),
"-d", gettext("set permission for descents"),
"-u", gettext("set permission for user"),
"-g", gettext("set permission for group"),
"-e", gettext("set permission for everyone"),
"-c", gettext("set create time permission"),
"-s", gettext("define permission set"),
/* unallow only */
"-r", gettext("remove permissions recursively"),
};
size_t unallow_size = sizeof (opt_desc) / sizeof (char *);
size_t allow_size = unallow_size - 2;
const char *props[ZFS_NUM_PROPS];
int i;
size_t count = 0;
FILE *fp = requested ? stdout : stderr;
zprop_desc_t *pdtbl = zfs_prop_get_table();
const char *fmt = gettext("%-16s %-14s\t%s\n");
(void) fprintf(fp, gettext("Usage: %s\n"), get_usage(un ? HELP_UNALLOW :
HELP_ALLOW));
(void) fprintf(fp, gettext("Options:\n"));
for (i = 0; i < (un ? unallow_size : allow_size); i += 2) {
const char *opt = opt_desc[i];
const char *optdsc = opt_desc[i + 1];
(void) fprintf(fp, gettext(" %-10s %s\n"), opt, optdsc);
}
(void) fprintf(fp, gettext("\nThe following permissions are "
"supported:\n\n"));
(void) fprintf(fp, fmt, gettext("NAME"), gettext("TYPE"),
gettext("NOTES"));
for (i = 0; i < ZFS_NUM_DELEG_NOTES; i++) {
const char *perm_name = zfs_deleg_perm_tbl[i].z_perm;
zfs_deleg_note_t perm_note = zfs_deleg_perm_tbl[i].z_note;
const char *perm_type = deleg_perm_type(perm_note);
const char *perm_comment = deleg_perm_comment(perm_note);
(void) fprintf(fp, fmt, perm_name, perm_type, perm_comment);
}
for (i = 0; i < ZFS_NUM_PROPS; i++) {
zprop_desc_t *pd = &pdtbl[i];
if (pd->pd_visible != B_TRUE)
continue;
if (pd->pd_attr == PROP_READONLY)
continue;
props[count++] = pd->pd_name;
}
props[count] = NULL;
qsort(props, count, sizeof (char *), prop_cmp);
for (i = 0; i < count; i++)
(void) fprintf(fp, fmt, props[i], gettext("property"), "");
if (msg != NULL)
(void) fprintf(fp, gettext("\nzfs: error: %s"), msg);
exit(requested ? 0 : 2);
}
static inline const char *
munge_args(int argc, char **argv, boolean_t un, size_t expected_argc,
char **permsp)
{
if (un && argc == expected_argc - 1)
*permsp = NULL;
else if (argc == expected_argc)
*permsp = argv[argc - 2];
else
allow_usage(un, B_FALSE,
gettext("wrong number of parameters\n"));
return (argv[argc - 1]);
}
static void
parse_allow_args(int argc, char **argv, boolean_t un, struct allow_opts *opts)
{
int uge_sum = opts->user + opts->group + opts->everyone;
int csuge_sum = opts->create + opts->set + uge_sum;
int ldcsuge_sum = csuge_sum + opts->local + opts->descend;
int all_sum = un ? ldcsuge_sum + opts->recursive : ldcsuge_sum;
if (uge_sum > 1)
allow_usage(un, B_FALSE,
gettext("-u, -g, and -e are mutually exclusive\n"));
if (opts->prt_usage) {
if (argc == 0 && all_sum == 0)
allow_usage(un, B_TRUE, NULL);
else
usage(B_FALSE);
}
if (opts->set) {
if (csuge_sum > 1)
allow_usage(un, B_FALSE,
gettext("invalid options combined with -s\n"));
opts->dataset = munge_args(argc, argv, un, 3, &opts->perms);
if (argv[0][0] != '@')
allow_usage(un, B_FALSE,
gettext("invalid set name: missing '@' prefix\n"));
opts->who = argv[0];
} else if (opts->create) {
if (ldcsuge_sum > 1)
allow_usage(un, B_FALSE,
gettext("invalid options combined with -c\n"));
opts->dataset = munge_args(argc, argv, un, 2, &opts->perms);
} else if (opts->everyone) {
if (csuge_sum > 1)
allow_usage(un, B_FALSE,
gettext("invalid options combined with -e\n"));
opts->dataset = munge_args(argc, argv, un, 2, &opts->perms);
} else if (uge_sum == 0 && argc > 0 && strcmp(argv[0], "everyone")
== 0) {
opts->everyone = B_TRUE;
argc--;
argv++;
opts->dataset = munge_args(argc, argv, un, 2, &opts->perms);
} else if (argc == 1 && !un) {
opts->prt_perms = B_TRUE;
opts->dataset = argv[argc-1];
} else {
opts->dataset = munge_args(argc, argv, un, 3, &opts->perms);
opts->who = argv[0];
}
if (!opts->local && !opts->descend) {
opts->local = B_TRUE;
opts->descend = B_TRUE;
}
}
static void
store_allow_perm(zfs_deleg_who_type_t type, boolean_t local, boolean_t descend,
const char *who, char *perms, nvlist_t *top_nvl)
{
int i;
char ld[2] = { '\0', '\0' };
char who_buf[MAXNAMELEN + 32];
char base_type = '\0';
char set_type = '\0';
nvlist_t *base_nvl = NULL;
nvlist_t *set_nvl = NULL;
nvlist_t *nvl;
if (nvlist_alloc(&base_nvl, NV_UNIQUE_NAME, 0) != 0)
nomem();
if (nvlist_alloc(&set_nvl, NV_UNIQUE_NAME, 0) != 0)
nomem();
switch (type) {
case ZFS_DELEG_NAMED_SET_SETS:
case ZFS_DELEG_NAMED_SET:
set_type = ZFS_DELEG_NAMED_SET_SETS;
base_type = ZFS_DELEG_NAMED_SET;
ld[0] = ZFS_DELEG_NA;
break;
case ZFS_DELEG_CREATE_SETS:
case ZFS_DELEG_CREATE:
set_type = ZFS_DELEG_CREATE_SETS;
base_type = ZFS_DELEG_CREATE;
ld[0] = ZFS_DELEG_NA;
break;
case ZFS_DELEG_USER_SETS:
case ZFS_DELEG_USER:
set_type = ZFS_DELEG_USER_SETS;
base_type = ZFS_DELEG_USER;
if (local)
ld[0] = ZFS_DELEG_LOCAL;
if (descend)
ld[1] = ZFS_DELEG_DESCENDENT;
break;
case ZFS_DELEG_GROUP_SETS:
case ZFS_DELEG_GROUP:
set_type = ZFS_DELEG_GROUP_SETS;
base_type = ZFS_DELEG_GROUP;
if (local)
ld[0] = ZFS_DELEG_LOCAL;
if (descend)
ld[1] = ZFS_DELEG_DESCENDENT;
break;
case ZFS_DELEG_EVERYONE_SETS:
case ZFS_DELEG_EVERYONE:
set_type = ZFS_DELEG_EVERYONE_SETS;
base_type = ZFS_DELEG_EVERYONE;
if (local)
ld[0] = ZFS_DELEG_LOCAL;
if (descend)
ld[1] = ZFS_DELEG_DESCENDENT;
break;
default:
assert(set_type != '\0' && base_type != '\0');
}
if (perms != NULL) {
char *curr = perms;
char *end = curr + strlen(perms);
while (curr < end) {
char *delim = strchr(curr, ',');
if (delim == NULL)
delim = end;
else
*delim = '\0';
if (curr[0] == '@')
nvl = set_nvl;
else
nvl = base_nvl;
(void) nvlist_add_boolean(nvl, curr);
if (delim != end)
*delim = ',';
curr = delim + 1;
}
for (i = 0; i < 2; i++) {
char locality = ld[i];
if (locality == 0)
continue;
if (!nvlist_empty(base_nvl)) {
if (who != NULL)
(void) snprintf(who_buf,
sizeof (who_buf), "%c%c$%s",
base_type, locality, who);
else
(void) snprintf(who_buf,
sizeof (who_buf), "%c%c$",
base_type, locality);
(void) nvlist_add_nvlist(top_nvl, who_buf,
base_nvl);
}
if (!nvlist_empty(set_nvl)) {
if (who != NULL)
(void) snprintf(who_buf,
sizeof (who_buf), "%c%c$%s",
set_type, locality, who);
else
(void) snprintf(who_buf,
sizeof (who_buf), "%c%c$",
set_type, locality);
(void) nvlist_add_nvlist(top_nvl, who_buf,
set_nvl);
}
}
} else {
for (i = 0; i < 2; i++) {
char locality = ld[i];
if (locality == 0)
continue;
if (who != NULL)
(void) snprintf(who_buf, sizeof (who_buf),
"%c%c$%s", base_type, locality, who);
else
(void) snprintf(who_buf, sizeof (who_buf),
"%c%c$", base_type, locality);
(void) nvlist_add_boolean(top_nvl, who_buf);
if (who != NULL)
(void) snprintf(who_buf, sizeof (who_buf),
"%c%c$%s", set_type, locality, who);
else
(void) snprintf(who_buf, sizeof (who_buf),
"%c%c$", set_type, locality);
(void) nvlist_add_boolean(top_nvl, who_buf);
}
}
}
static int
construct_fsacl_list(boolean_t un, struct allow_opts *opts, nvlist_t **nvlp)
{
if (nvlist_alloc(nvlp, NV_UNIQUE_NAME, 0) != 0)
nomem();
if (opts->set) {
store_allow_perm(ZFS_DELEG_NAMED_SET, opts->local,
opts->descend, opts->who, opts->perms, *nvlp);
} else if (opts->create) {
store_allow_perm(ZFS_DELEG_CREATE, opts->local,
opts->descend, NULL, opts->perms, *nvlp);
} else if (opts->everyone) {
store_allow_perm(ZFS_DELEG_EVERYONE, opts->local,
opts->descend, NULL, opts->perms, *nvlp);
} else {
char *curr = opts->who;
char *end = curr + strlen(curr);
while (curr < end) {
const char *who;
zfs_deleg_who_type_t who_type = ZFS_DELEG_WHO_UNKNOWN;
char *endch;
char *delim = strchr(curr, ',');
char errbuf[256];
char id[64];
struct passwd *p = NULL;
struct group *g = NULL;
uid_t rid;
if (delim == NULL)
delim = end;
else
*delim = '\0';
rid = (uid_t)strtol(curr, &endch, 0);
if (opts->user) {
who_type = ZFS_DELEG_USER;
if (*endch != '\0')
p = getpwnam(curr);
else
p = getpwuid(rid);
if (p != NULL)
rid = p->pw_uid;
else if (*endch != '\0') {
(void) snprintf(errbuf, 256, gettext(
"invalid user %s\n"), curr);
allow_usage(un, B_TRUE, errbuf);
}
} else if (opts->group) {
who_type = ZFS_DELEG_GROUP;
if (*endch != '\0')
g = getgrnam(curr);
else
g = getgrgid(rid);
if (g != NULL)
rid = g->gr_gid;
else if (*endch != '\0') {
(void) snprintf(errbuf, 256, gettext(
"invalid group %s\n"), curr);
allow_usage(un, B_TRUE, errbuf);
}
} else {
if (*endch != '\0') {
p = getpwnam(curr);
} else {
p = getpwuid(rid);
}
if (p == NULL) {
if (*endch != '\0') {
g = getgrnam(curr);
} else {
g = getgrgid(rid);
}
}
if (p != NULL) {
who_type = ZFS_DELEG_USER;
rid = p->pw_uid;
} else if (g != NULL) {
who_type = ZFS_DELEG_GROUP;
rid = g->gr_gid;
} else {
(void) snprintf(errbuf, 256, gettext(
"invalid user/group %s\n"), curr);
allow_usage(un, B_TRUE, errbuf);
}
}
(void) sprintf(id, "%u", rid);
who = id;
store_allow_perm(who_type, opts->local,
opts->descend, who, opts->perms, *nvlp);
curr = delim + 1;
}
}
return (0);
}
static void
print_set_creat_perms(uu_avl_t *who_avl)
{
const char *sc_title[] = {
gettext("Permission sets:\n"),
gettext("Create time permissions:\n"),
NULL
};
who_perm_node_t *who_node = NULL;
int prev_weight = -1;
for (who_node = uu_avl_first(who_avl); who_node != NULL;
who_node = uu_avl_next(who_avl, who_node)) {
uu_avl_t *avl = who_node->who_perm.who_deleg_perm_avl;
zfs_deleg_who_type_t who_type = who_node->who_perm.who_type;
const char *who_name = who_node->who_perm.who_name;
int weight = who_type2weight(who_type);
boolean_t first = B_TRUE;
deleg_perm_node_t *deleg_node;
if (prev_weight != weight) {
(void) printf("%s", sc_title[weight]);
prev_weight = weight;
}
if (who_name == NULL || strnlen(who_name, 1) == 0)
(void) printf("\t");
else
(void) printf("\t%s ", who_name);
for (deleg_node = uu_avl_first(avl); deleg_node != NULL;
deleg_node = uu_avl_next(avl, deleg_node)) {
if (first) {
(void) printf("%s",
deleg_node->dpn_perm.dp_name);
first = B_FALSE;
} else
(void) printf(",%s",
deleg_node->dpn_perm.dp_name);
}
(void) printf("\n");
}
}
2008-11-20 23:01:55 +03:00
static void
print_uge_deleg_perms(uu_avl_t *who_avl, boolean_t local, boolean_t descend,
const char *title)
{
who_perm_node_t *who_node = NULL;
boolean_t prt_title = B_TRUE;
uu_avl_walk_t *walk;
2008-11-20 23:01:55 +03:00
if ((walk = uu_avl_walk_start(who_avl, UU_WALK_ROBUST)) == NULL)
nomem();
2008-11-20 23:01:55 +03:00
while ((who_node = uu_avl_walk_next(walk)) != NULL) {
const char *who_name = who_node->who_perm.who_name;
const char *nice_who_name = who_node->who_perm.who_ug_name;
uu_avl_t *avl = who_node->who_perm.who_deleg_perm_avl;
zfs_deleg_who_type_t who_type = who_node->who_perm.who_type;
char delim = ' ';
deleg_perm_node_t *deleg_node;
boolean_t prt_who = B_TRUE;
for (deleg_node = uu_avl_first(avl);
deleg_node != NULL;
deleg_node = uu_avl_next(avl, deleg_node)) {
if (local != deleg_node->dpn_perm.dp_local ||
descend != deleg_node->dpn_perm.dp_descend)
continue;
if (prt_who) {
const char *who = NULL;
if (prt_title) {
prt_title = B_FALSE;
(void) printf("%s", title);
}
switch (who_type) {
case ZFS_DELEG_USER_SETS:
case ZFS_DELEG_USER:
who = gettext("user");
if (nice_who_name)
who_name = nice_who_name;
break;
case ZFS_DELEG_GROUP_SETS:
case ZFS_DELEG_GROUP:
who = gettext("group");
if (nice_who_name)
who_name = nice_who_name;
break;
case ZFS_DELEG_EVERYONE_SETS:
case ZFS_DELEG_EVERYONE:
who = gettext("everyone");
who_name = NULL;
break;
default:
assert(who != NULL);
}
prt_who = B_FALSE;
if (who_name == NULL)
(void) printf("\t%s", who);
else
(void) printf("\t%s %s", who, who_name);
2008-11-20 23:01:55 +03:00
}
(void) printf("%c%s", delim,
deleg_node->dpn_perm.dp_name);
delim = ',';
2008-11-20 23:01:55 +03:00
}
if (!prt_who)
(void) printf("\n");
}
uu_avl_walk_end(walk);
}
2008-11-20 23:01:55 +03:00
static void
print_fs_perms(fs_perm_set_t *fspset)
{
fs_perm_node_t *node = NULL;
char buf[MAXNAMELEN + 32];
const char *dsname = buf;
for (node = uu_list_first(fspset->fsps_list); node != NULL;
node = uu_list_next(fspset->fsps_list, node)) {
uu_avl_t *sc_avl = node->fspn_fsperm.fsp_sc_avl;
uu_avl_t *uge_avl = node->fspn_fsperm.fsp_uge_avl;
int left = 0;
(void) snprintf(buf, sizeof (buf),
gettext("---- Permissions on %s "),
node->fspn_fsperm.fsp_name);
(void) printf("%s", dsname);
left = 70 - strlen(buf);
while (left-- > 0)
(void) printf("-");
(void) printf("\n");
print_set_creat_perms(sc_avl);
print_uge_deleg_perms(uge_avl, B_TRUE, B_FALSE,
gettext("Local permissions:\n"));
print_uge_deleg_perms(uge_avl, B_FALSE, B_TRUE,
gettext("Descendent permissions:\n"));
print_uge_deleg_perms(uge_avl, B_TRUE, B_TRUE,
gettext("Local+Descendent permissions:\n"));
}
}
2008-11-20 23:01:55 +03:00
static fs_perm_set_t fs_perm_set = { NULL, NULL, NULL, NULL };
struct deleg_perms {
boolean_t un;
nvlist_t *nvl;
};
static int
set_deleg_perms(zfs_handle_t *zhp, void *data)
{
struct deleg_perms *perms = (struct deleg_perms *)data;
zfs_type_t zfs_type = zfs_get_type(zhp);
if (zfs_type != ZFS_TYPE_FILESYSTEM && zfs_type != ZFS_TYPE_VOLUME)
return (0);
return (zfs_set_fsacl(zhp, perms->un, perms->nvl));
2008-11-20 23:01:55 +03:00
}
static int
zfs_do_allow_unallow_impl(int argc, char **argv, boolean_t un)
2008-11-20 23:01:55 +03:00
{
zfs_handle_t *zhp;
nvlist_t *perm_nvl = NULL;
nvlist_t *update_perm_nvl = NULL;
int error = 1;
int c;
struct allow_opts opts = { 0 };
2008-11-20 23:01:55 +03:00
const char *optstr = un ? "ldugecsrh" : "ldugecsh";
/* check opts */
while ((c = getopt(argc, argv, optstr)) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'l':
opts.local = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case 'd':
opts.descend = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'u':
opts.user = B_TRUE;
break;
case 'g':
opts.group = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'e':
opts.everyone = B_TRUE;
2009-02-18 23:51:31 +03:00
break;
case 's':
opts.set = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case 'c':
opts.create = B_TRUE;
break;
case 'r':
opts.recursive = B_TRUE;
2008-11-20 23:01:55 +03:00
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case 'h':
opts.prt_usage = B_TRUE;
break;
2008-11-20 23:01:55 +03:00
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check arguments */
parse_allow_args(argc, argv, un, &opts);
/* try to open the dataset */
if ((zhp = zfs_open(g_zfs, opts.dataset, ZFS_TYPE_FILESYSTEM |
ZFS_TYPE_VOLUME)) == NULL) {
(void) fprintf(stderr, "Failed to open dataset: %s\n",
opts.dataset);
return (-1);
2008-11-20 23:01:55 +03:00
}
if (zfs_get_fsacl(zhp, &perm_nvl) != 0)
goto cleanup2;
fs_perm_set_init(&fs_perm_set);
if (parse_fs_perm_set(&fs_perm_set, perm_nvl) != 0) {
(void) fprintf(stderr, "Failed to parse fsacl permissions\n");
goto cleanup1;
2008-11-20 23:01:55 +03:00
}
if (opts.prt_perms)
print_fs_perms(&fs_perm_set);
else {
(void) construct_fsacl_list(un, &opts, &update_perm_nvl);
if (zfs_set_fsacl(zhp, un, update_perm_nvl) != 0)
goto cleanup0;
if (un && opts.recursive) {
struct deleg_perms data = { un, update_perm_nvl };
if (zfs_iter_filesystems(zhp, set_deleg_perms,
&data) != 0)
goto cleanup0;
}
2008-11-20 23:01:55 +03:00
}
error = 0;
2008-11-20 23:01:55 +03:00
cleanup0:
nvlist_free(perm_nvl);
nvlist_free(update_perm_nvl);
cleanup1:
fs_perm_set_fini(&fs_perm_set);
cleanup2:
zfs_close(zhp);
return (error);
}
static int
zfs_do_allow(int argc, char **argv)
{
return (zfs_do_allow_unallow_impl(argc, argv, B_FALSE));
}
static int
zfs_do_unallow(int argc, char **argv)
{
return (zfs_do_allow_unallow_impl(argc, argv, B_TRUE));
2008-11-20 23:01:55 +03:00
}
2009-08-18 22:43:27 +04:00
static int
zfs_do_hold_rele_impl(int argc, char **argv, boolean_t holding)
{
int errors = 0;
int i;
const char *tag;
boolean_t recursive = B_FALSE;
const char *opts = holding ? "rt" : "r";
2009-08-18 22:43:27 +04:00
int c;
/* check options */
while ((c = getopt(argc, argv, opts)) != -1) {
2009-08-18 22:43:27 +04:00
switch (c) {
case 'r':
recursive = B_TRUE;
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 2)
usage(B_FALSE);
tag = argv[0];
--argc;
++argv;
if (holding && tag[0] == '.') {
/* tags starting with '.' are reserved for libzfs */
(void) fprintf(stderr, gettext("tag may not start with '.'\n"));
usage(B_FALSE);
2009-08-18 22:43:27 +04:00
}
for (i = 0; i < argc; ++i) {
zfs_handle_t *zhp;
char parent[ZFS_MAX_DATASET_NAME_LEN];
2009-08-18 22:43:27 +04:00
const char *delim;
char *path = argv[i];
delim = strchr(path, '@');
if (delim == NULL) {
(void) fprintf(stderr,
gettext("'%s' is not a snapshot\n"), path);
++errors;
continue;
}
Cleanup: Switch to strlcpy from strncpy Coverity found a bug in `zfs_secpolicy_create_clone()` where it is possible for us to pass an unterminated string when `zfs_get_parent()` returns an error. Upon inspection, it is clear that using `strlcpy()` would have avoided this issue. Looking at the codebase, there are a number of other uses of `strncpy()` that are unsafe and even when it is used safely, switching to `strlcpy()` would make the code more readable. Therefore, we switch all instances where we use `strncpy()` to use `strlcpy()`. Unfortunately, we do not portably have access to `strlcpy()` in tests/zfs-tests/cmd/zfs_diff-socket.c because it does not link to libspl. Modifying the appropriate Makefile.am to try to link to it resulted in an error from the naming choice used in the file. Trying to disable the check on the file did not work on FreeBSD because Clang ignores `#undef` when a definition is provided by `-Dstrncpy(...)=...`. We workaround that by explictly including the C file from libspl into the test. This makes things build correctly everywhere. We add a deprecation warning to `config/Rules.am` and suppress it on the remaining `strncpy()` usage. `strlcpy()` is not portably avaliable in tests/zfs-tests/cmd/zfs_diff-socket.c, so we use `snprintf()` there as a substitute. This patch does not tackle the related problem of `strcpy()`, which is even less safe. Thankfully, a quick inspection found that it is used far more correctly than strncpy() was used. A quick inspection did not find any problems with `strcpy()` usage outside of zhack, but it should be said that I only checked around 90% of them. Lastly, some of the fields in kstat_t varied in size by 1 depending on whether they were in userspace or in the kernel. The origin of this discrepancy appears to be 04a479f7066ccdaa23a6546955303b172f4a6909 where it was made for no apparent reason. It conflicts with the comment on KSTAT_STRLEN, so we shrink the kernel field sizes to match the userspace field sizes. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13876
2022-09-28 02:35:29 +03:00
(void) strlcpy(parent, path, MIN(sizeof (parent),
delim - path + 1));
2009-08-18 22:43:27 +04:00
zhp = zfs_open(g_zfs, parent,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL) {
++errors;
continue;
}
if (holding) {
if (zfs_hold(zhp, delim+1, tag, recursive, -1) != 0)
++errors;
} else {
if (zfs_release(zhp, delim+1, tag, recursive) != 0)
++errors;
}
2009-08-18 22:43:27 +04:00
zfs_close(zhp);
}
return (errors != 0);
}
/*
* zfs hold [-r] [-t] <tag> <snap> ...
2009-08-18 22:43:27 +04:00
*
* -r Recursively hold
2009-08-18 22:43:27 +04:00
*
* Apply a user-hold with the given tag to the list of snapshots.
*/
static int
zfs_do_hold(int argc, char **argv)
{
return (zfs_do_hold_rele_impl(argc, argv, B_TRUE));
}
/*
* zfs release [-r] <tag> <snap> ...
*
* -r Recursively release
2009-08-18 22:43:27 +04:00
*
* Release a user-hold with the given tag from the list of snapshots.
*/
static int
zfs_do_release(int argc, char **argv)
{
return (zfs_do_hold_rele_impl(argc, argv, B_FALSE));
}
typedef struct holds_cbdata {
boolean_t cb_recursive;
const char *cb_snapname;
nvlist_t **cb_nvlp;
size_t cb_max_namelen;
size_t cb_max_taglen;
} holds_cbdata_t;
#define STRFTIME_FMT_STR "%a %b %e %H:%M %Y"
#define DATETIME_BUF_LEN (32)
/*
*
*/
static void
print_holds(boolean_t scripted, int nwidth, int tagwidth, nvlist_t *nvl)
{
int i;
nvpair_t *nvp = NULL;
const char *const hdr_cols[] = { "NAME", "TAG", "TIMESTAMP" };
const char *col;
if (!scripted) {
for (i = 0; i < 3; i++) {
col = gettext(hdr_cols[i]);
if (i < 2)
(void) printf("%-*s ", i ? tagwidth : nwidth,
col);
else
(void) printf("%s\n", col);
}
}
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
char *zname = nvpair_name(nvp);
nvlist_t *nvl2;
nvpair_t *nvp2 = NULL;
(void) nvpair_value_nvlist(nvp, &nvl2);
while ((nvp2 = nvlist_next_nvpair(nvl2, nvp2)) != NULL) {
char tsbuf[DATETIME_BUF_LEN];
const char *tagname = nvpair_name(nvp2);
uint64_t val = 0;
time_t time;
struct tm t;
(void) nvpair_value_uint64(nvp2, &val);
time = (time_t)val;
(void) localtime_r(&time, &t);
(void) strftime(tsbuf, DATETIME_BUF_LEN,
gettext(STRFTIME_FMT_STR), &t);
if (scripted) {
(void) printf("%s\t%s\t%s\n", zname,
tagname, tsbuf);
} else {
(void) printf("%-*s %-*s %s\n", nwidth,
zname, tagwidth, tagname, tsbuf);
}
}
}
}
/*
* Generic callback function to list a dataset or snapshot.
*/
static int
holds_callback(zfs_handle_t *zhp, void *data)
{
holds_cbdata_t *cbp = data;
nvlist_t *top_nvl = *cbp->cb_nvlp;
nvlist_t *nvl = NULL;
nvpair_t *nvp = NULL;
const char *zname = zfs_get_name(zhp);
size_t znamelen = strlen(zname);
if (cbp->cb_recursive) {
const char *snapname;
char *delim = strchr(zname, '@');
if (delim == NULL)
return (0);
snapname = delim + 1;
if (strcmp(cbp->cb_snapname, snapname))
return (0);
}
if (zfs_get_holds(zhp, &nvl) != 0)
return (-1);
if (znamelen > cbp->cb_max_namelen)
cbp->cb_max_namelen = znamelen;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
const char *tag = nvpair_name(nvp);
size_t taglen = strlen(tag);
if (taglen > cbp->cb_max_taglen)
cbp->cb_max_taglen = taglen;
}
return (nvlist_add_nvlist(top_nvl, zname, nvl));
}
/*
* zfs holds [-rH] <snap> ...
*
* -r Lists holds that are set on the named snapshots recursively.
* -H Scripted mode; elide headers and separate columns by tabs.
*/
static int
zfs_do_holds(int argc, char **argv)
{
int c;
boolean_t errors = B_FALSE;
boolean_t scripted = B_FALSE;
boolean_t recursive = B_FALSE;
int types = ZFS_TYPE_SNAPSHOT;
holds_cbdata_t cb = { 0 };
int limit = 0;
int ret = 0;
int flags = 0;
/* check options */
while ((c = getopt(argc, argv, "rH")) != -1) {
switch (c) {
case 'r':
recursive = B_TRUE;
break;
case 'H':
scripted = B_TRUE;
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
if (recursive) {
types |= ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME;
flags |= ZFS_ITER_RECURSE;
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1)
usage(B_FALSE);
nvlist_t *nvl = fnvlist_alloc();
for (int i = 0; i < argc; ++i) {
char *snapshot = argv[i];
const char *delim;
const char *snapname;
delim = strchr(snapshot, '@');
if (delim == NULL) {
(void) fprintf(stderr,
gettext("'%s' is not a snapshot\n"), snapshot);
errors = B_TRUE;
continue;
}
snapname = delim + 1;
if (recursive)
snapshot[delim - snapshot] = '\0';
cb.cb_recursive = recursive;
cb.cb_snapname = snapname;
cb.cb_nvlp = &nvl;
/*
* 1. collect holds data, set format options
*/
ret = zfs_for_each(1, argv + i, flags, types, NULL, NULL, limit,
holds_callback, &cb);
if (ret != 0)
errors = B_TRUE;
}
/*
* 2. print holds data
*/
print_holds(scripted, cb.cb_max_namelen, cb.cb_max_taglen, nvl);
if (nvlist_empty(nvl))
(void) fprintf(stderr, gettext("no datasets available\n"));
nvlist_free(nvl);
return (errors);
}
2008-11-20 23:01:55 +03:00
#define CHECK_SPINNER 30
#define SPINNER_TIME 3 /* seconds */
#define MOUNT_TIME 1 /* seconds */
typedef struct get_all_state {
boolean_t ga_verbose;
get_all_cb_t *ga_cbp;
} get_all_state_t;
2008-11-20 23:01:55 +03:00
static int
get_one_dataset(zfs_handle_t *zhp, void *data)
{
static const char *const spin[] = { "-", "\\", "|", "/" };
2008-11-20 23:01:55 +03:00
static int spinval = 0;
static int spincheck = 0;
static time_t last_spin_time = (time_t)0;
get_all_state_t *state = data;
2008-11-20 23:01:55 +03:00
zfs_type_t type = zfs_get_type(zhp);
if (state->ga_verbose) {
2008-11-20 23:01:55 +03:00
if (--spincheck < 0) {
time_t now = time(NULL);
if (last_spin_time + SPINNER_TIME < now) {
update_progress(spin[spinval++ % 4]);
2008-11-20 23:01:55 +03:00
last_spin_time = now;
}
spincheck = CHECK_SPINNER;
}
}
/*
* Iterate over any nested datasets.
2008-11-20 23:01:55 +03:00
*/
if (zfs_iter_filesystems(zhp, get_one_dataset, data) != 0) {
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
return (1);
}
/*
* Skip any datasets whose type does not match.
*/
if ((type & ZFS_TYPE_FILESYSTEM) == 0) {
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
return (0);
}
libzfs_add_handle(state->ga_cbp, zhp);
assert(state->ga_cbp->cb_used <= state->ga_cbp->cb_alloc);
2008-11-20 23:01:55 +03:00
return (0);
}
static void
get_all_datasets(get_all_cb_t *cbp, boolean_t verbose)
2008-11-20 23:01:55 +03:00
{
get_all_state_t state = {
.ga_verbose = verbose,
.ga_cbp = cbp
};
2008-11-20 23:01:55 +03:00
if (verbose)
set_progress_header(gettext("Reading ZFS config"));
(void) zfs_iter_root(g_zfs, get_one_dataset, &state);
2008-11-20 23:01:55 +03:00
if (verbose)
finish_progress(gettext("done."));
2008-11-20 23:01:55 +03:00
}
/*
* Generic callback for sharing or mounting filesystems. Because the code is so
* similar, we have a common function with an extra parameter to determine which
* mode we are using.
*/
typedef enum { OP_SHARE, OP_MOUNT } share_mount_op_t;
typedef struct share_mount_state {
share_mount_op_t sm_op;
boolean_t sm_verbose;
int sm_flags;
char *sm_options;
enum sa_protocol sm_proto; /* only valid for OP_SHARE */
pthread_mutex_t sm_lock; /* protects the remaining fields */
uint_t sm_total; /* number of filesystems to process */
uint_t sm_done; /* number of filesystems processed */
int sm_status; /* -1 if any of the share/mount operations failed */
} share_mount_state_t;
2008-11-20 23:01:55 +03:00
/*
* Share or mount a dataset.
*/
static int
share_mount_one(zfs_handle_t *zhp, int op, int flags, enum sa_protocol protocol,
2008-11-20 23:01:55 +03:00
boolean_t explicit, const char *options)
{
char mountpoint[ZFS_MAXPROPLEN];
char shareopts[ZFS_MAXPROPLEN];
char smbshareopts[ZFS_MAXPROPLEN];
const char *cmdname = op == OP_SHARE ? "share" : "mount";
struct mnttab mnt;
uint64_t zoned, canmount;
boolean_t shared_nfs, shared_smb;
assert(zfs_get_type(zhp) & ZFS_TYPE_FILESYSTEM);
2008-11-20 23:01:55 +03:00
/*
* Check to make sure we can mount/share this dataset. If we
* are in the global zone and the filesystem is exported to a
* local zone, or if we are in a local zone and the
* filesystem is not exported, then it is an error.
*/
zoned = zfs_prop_get_int(zhp, ZFS_PROP_ZONED);
2008-11-20 23:01:55 +03:00
if (zoned && getzoneid() == GLOBAL_ZONEID) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot %s '%s': "
"dataset is exported to a local zone\n"), cmdname,
zfs_get_name(zhp));
return (1);
2008-11-20 23:01:55 +03:00
} else if (!zoned && getzoneid() != GLOBAL_ZONEID) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot %s '%s': "
"permission denied\n"), cmdname,
zfs_get_name(zhp));
return (1);
}
2008-11-20 23:01:55 +03:00
/*
* Ignore any filesystems which don't apply to us. This
* includes those with a legacy mountpoint, or those with
* legacy share options.
*/
verify(zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT, mountpoint,
sizeof (mountpoint), NULL, NULL, 0, B_FALSE) == 0);
verify(zfs_prop_get(zhp, ZFS_PROP_SHARENFS, shareopts,
sizeof (shareopts), NULL, NULL, 0, B_FALSE) == 0);
verify(zfs_prop_get(zhp, ZFS_PROP_SHARESMB, smbshareopts,
sizeof (smbshareopts), NULL, NULL, 0, B_FALSE) == 0);
if (op == OP_SHARE && strcmp(shareopts, "off") == 0 &&
strcmp(smbshareopts, "off") == 0) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot share '%s': "
"legacy share\n"), zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use exports(5) or "
"smb.conf(5) to share this filesystem, or set "
"the sharenfs or sharesmb property\n"));
return (1);
}
2008-11-20 23:01:55 +03:00
/*
* We cannot share or mount legacy filesystems. If the
* shareopts is non-legacy but the mountpoint is legacy, we
* treat it as a legacy share.
*/
if (strcmp(mountpoint, "legacy") == 0) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot %s '%s': "
"legacy mountpoint\n"), cmdname, zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use %s(8) to "
"%s this filesystem\n"), cmdname, cmdname);
return (1);
}
2008-11-20 23:01:55 +03:00
if (strcmp(mountpoint, "none") == 0) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot %s '%s': no "
"mountpoint set\n"), cmdname, zfs_get_name(zhp));
return (1);
}
2008-11-20 23:01:55 +03:00
/*
* canmount explicit outcome
* on no pass through
* on yes pass through
* off no return 0
* off yes display error, return 1
* noauto no return 0
* noauto yes pass through
*/
canmount = zfs_prop_get_int(zhp, ZFS_PROP_CANMOUNT);
if (canmount == ZFS_CANMOUNT_OFF) {
if (!explicit)
return (0);
(void) fprintf(stderr, gettext("cannot %s '%s': "
"'canmount' property is set to 'off'\n"), cmdname,
zfs_get_name(zhp));
return (1);
} else if (canmount == ZFS_CANMOUNT_NOAUTO && !explicit) {
/*
* When performing a 'zfs mount -a', we skip any mounts for
* datasets that have 'noauto' set. Sharing a dataset with
* 'noauto' set is only allowed if it's mounted.
*/
if (op == OP_MOUNT)
return (0);
if (op == OP_SHARE && !zfs_is_mounted(zhp, NULL)) {
/* also purge it from existing exports */
zfs_unshare(zhp, mountpoint, NULL);
return (0);
}
}
/*
* If this filesystem is encrypted and does not have
* a loaded key, we can not mount it.
*/
if ((flags & MS_CRYPT) == 0 &&
zfs_prop_get_int(zhp, ZFS_PROP_ENCRYPTION) != ZIO_CRYPT_OFF &&
zfs_prop_get_int(zhp, ZFS_PROP_KEYSTATUS) ==
ZFS_KEYSTATUS_UNAVAILABLE) {
if (!explicit)
return (0);
(void) fprintf(stderr, gettext("cannot %s '%s': "
"encryption key not loaded\n"), cmdname, zfs_get_name(zhp));
return (1);
}
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
/*
* If this filesystem is inconsistent and has a receive resume
* token, we can not mount it.
*/
if (zfs_prop_get_int(zhp, ZFS_PROP_INCONSISTENT) &&
zfs_prop_get(zhp, ZFS_PROP_RECEIVE_RESUME_TOKEN,
NULL, 0, NULL, NULL, 0, B_TRUE) == 0) {
if (!explicit)
return (0);
(void) fprintf(stderr, gettext("cannot %s '%s': "
"Contains partially-completed state from "
"\"zfs receive -s\", which can be resumed with "
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-07 00:22:48 +03:00
"\"zfs send -t\"\n"),
cmdname, zfs_get_name(zhp));
return (1);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
if (zfs_prop_get_int(zhp, ZFS_PROP_REDACTED) && !(flags & MS_FORCE)) {
if (!explicit)
return (0);
(void) fprintf(stderr, gettext("cannot %s '%s': "
"Dataset is not complete, was created by receiving "
"a redacted zfs send stream.\n"), cmdname,
zfs_get_name(zhp));
return (1);
}
/*
* At this point, we have verified that the mountpoint and/or
* shareopts are appropriate for auto management. If the
* filesystem is already mounted or shared, return (failing
* for explicit requests); otherwise mount or share the
* filesystem.
*/
switch (op) {
case OP_SHARE: {
enum sa_protocol prot[] = {SA_PROTOCOL_NFS, SA_NO_PROTOCOL};
shared_nfs = zfs_is_shared(zhp, NULL, prot);
*prot = SA_PROTOCOL_SMB;
shared_smb = zfs_is_shared(zhp, NULL, prot);
if ((shared_nfs && shared_smb) ||
(shared_nfs && strcmp(shareopts, "on") == 0 &&
strcmp(smbshareopts, "off") == 0) ||
(shared_smb && strcmp(smbshareopts, "on") == 0 &&
strcmp(shareopts, "off") == 0)) {
2008-11-20 23:01:55 +03:00
if (!explicit)
return (0);
(void) fprintf(stderr, gettext("cannot share "
"'%s': filesystem already shared\n"),
2008-11-20 23:01:55 +03:00
zfs_get_name(zhp));
return (1);
}
if (!zfs_is_mounted(zhp, NULL) &&
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
zfs_mount(zhp, NULL, flags) != 0)
return (1);
2008-11-20 23:01:55 +03:00
*prot = protocol;
if (zfs_share(zhp, protocol == SA_NO_PROTOCOL ? NULL : prot))
return (1);
2008-11-20 23:01:55 +03:00
}
break;
2008-11-20 23:01:55 +03:00
case OP_MOUNT:
mnt.mnt_mntopts = (char *)(options ?: "");
2008-11-20 23:01:55 +03:00
if (!hasmntopt(&mnt, MNTOPT_REMOUNT) &&
zfs_is_mounted(zhp, NULL)) {
if (!explicit)
return (0);
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot mount "
"'%s': filesystem already mounted\n"),
zfs_get_name(zhp));
return (1);
2008-11-20 23:01:55 +03:00
}
if (zfs_mount(zhp, options, flags) != 0)
return (1);
break;
}
2008-11-20 23:01:55 +03:00
return (0);
}
/*
* Reports progress in the form "(current/total)". Not thread-safe.
*/
static void
report_mount_progress(int current, int total)
{
static time_t last_progress_time = 0;
2008-11-20 23:01:55 +03:00
time_t now = time(NULL);
char info[32];
2008-11-20 23:01:55 +03:00
/* display header if we're here for the first time */
if (current == 1) {
set_progress_header(gettext("Mounting ZFS filesystems"));
2008-11-20 23:01:55 +03:00
} else if (current != total && last_progress_time + MOUNT_TIME >= now) {
/* too soon to report again */
return;
}
last_progress_time = now;
(void) sprintf(info, "(%d/%d)", current, total);
2008-11-20 23:01:55 +03:00
if (current == total)
finish_progress(info);
else
update_progress(info);
2008-11-20 23:01:55 +03:00
}
/*
* zfs_foreach_mountpoint() callback that mounts or shares one filesystem and
* updates the progress meter.
*/
static int
share_mount_one_cb(zfs_handle_t *zhp, void *arg)
{
share_mount_state_t *sms = arg;
int ret;
ret = share_mount_one(zhp, sms->sm_op, sms->sm_flags, sms->sm_proto,
B_FALSE, sms->sm_options);
pthread_mutex_lock(&sms->sm_lock);
if (ret != 0)
sms->sm_status = ret;
sms->sm_done++;
if (sms->sm_verbose)
report_mount_progress(sms->sm_done, sms->sm_total);
pthread_mutex_unlock(&sms->sm_lock);
return (ret);
}
2008-11-20 23:01:55 +03:00
static void
append_options(char *mntopts, char *newopts)
{
int len = strlen(mntopts);
/* original length plus new string to append plus 1 for the comma */
if (len + 1 + strlen(newopts) >= MNT_LINE_MAX) {
(void) fprintf(stderr, gettext("the opts argument for "
"'%s' option is too long (more than %d chars)\n"),
2008-11-20 23:01:55 +03:00
"-o", MNT_LINE_MAX);
usage(B_FALSE);
}
if (*mntopts)
mntopts[len++] = ',';
(void) strcpy(&mntopts[len], newopts);
}
static enum sa_protocol
sa_protocol_decode(const char *protocol)
{
for (enum sa_protocol i = 0; i < ARRAY_SIZE(sa_protocol_names); ++i)
if (strcmp(protocol, sa_protocol_names[i]) == 0)
return (i);
(void) fputs(gettext("share type must be one of: "), stderr);
for (enum sa_protocol i = 0;
i < ARRAY_SIZE(sa_protocol_names); ++i)
(void) fprintf(stderr, "%s%s",
i != 0 ? ", " : "", sa_protocol_names[i]);
(void) fputc('\n', stderr);
usage(B_FALSE);
}
2008-11-20 23:01:55 +03:00
static int
share_mount(int op, int argc, char **argv)
{
int do_all = 0;
boolean_t verbose = B_FALSE;
int c, ret = 0;
char *options = NULL;
int flags = 0;
2008-11-20 23:01:55 +03:00
/* check options */
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
while ((c = getopt(argc, argv, op == OP_MOUNT ? ":alvo:Of" : "al"))
2008-11-20 23:01:55 +03:00
!= -1) {
switch (c) {
case 'a':
do_all = 1;
break;
case 'v':
verbose = B_TRUE;
break;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
case 'l':
flags |= MS_CRYPT;
break;
2008-11-20 23:01:55 +03:00
case 'o':
if (*optarg == '\0') {
(void) fprintf(stderr, gettext("empty mount "
"options (-o) specified\n"));
usage(B_FALSE);
}
if (options == NULL)
options = safe_malloc(MNT_LINE_MAX + 1);
/* option validation is done later */
append_options(options, optarg);
break;
case 'O':
flags |= MS_OVERLAY;
break;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 19:48:13 +03:00
case 'f':
flags |= MS_FORCE;
break;
2008-11-20 23:01:55 +03:00
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (do_all) {
enum sa_protocol protocol = SA_NO_PROTOCOL;
2008-11-20 23:01:55 +03:00
if (op == OP_SHARE && argc > 0) {
protocol = sa_protocol_decode(argv[0]);
2008-11-20 23:01:55 +03:00
argc--;
argv++;
}
if (argc != 0) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
start_progress_timer();
get_all_cb_t cb = { 0 };
get_all_datasets(&cb, verbose);
2008-11-20 23:01:55 +03:00
if (cb.cb_used == 0) {
free(options);
2008-11-20 23:01:55 +03:00
return (0);
}
2008-11-20 23:01:55 +03:00
share_mount_state_t share_mount_state = { 0 };
share_mount_state.sm_op = op;
share_mount_state.sm_verbose = verbose;
share_mount_state.sm_flags = flags;
share_mount_state.sm_options = options;
share_mount_state.sm_proto = protocol;
share_mount_state.sm_total = cb.cb_used;
pthread_mutex_init(&share_mount_state.sm_lock, NULL);
2008-11-20 23:01:55 +03:00
/* For a 'zfs share -a' operation start with a clean slate. */
zfs_truncate_shares(NULL);
/*
* libshare isn't mt-safe, so only do the operation in parallel
* if we're mounting. Additionally, the key-loading option must
* be serialized so that we can prompt the user for their keys
* in a consistent manner.
*/
zfs_foreach_mountpoint(g_zfs, cb.cb_handles, cb.cb_used,
share_mount_one_cb, &share_mount_state,
op == OP_MOUNT && !(flags & MS_CRYPT));
zfs_commit_shares(NULL);
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 19:19:18 +03:00
ret = share_mount_state.sm_status;
2008-11-20 23:01:55 +03:00
for (int i = 0; i < cb.cb_used; i++)
zfs_close(cb.cb_handles[i]);
free(cb.cb_handles);
2008-11-20 23:01:55 +03:00
} else if (argc == 0) {
FILE *mnttab;
2008-11-20 23:01:55 +03:00
struct mnttab entry;
if ((op == OP_SHARE) || (options != NULL)) {
(void) fprintf(stderr, gettext("missing filesystem "
"argument (specify -a for all)\n"));
usage(B_FALSE);
}
/*
* When mount is given no arguments, go through
* /proc/self/mounts and display any active ZFS mounts.
* We hide any snapshots, since they are controlled
* automatically.
2008-11-20 23:01:55 +03:00
*/
if ((mnttab = fopen(MNTTAB, "re")) == NULL) {
free(options);
return (ENOENT);
}
while (getmntent(mnttab, &entry) == 0) {
2008-11-20 23:01:55 +03:00
if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0 ||
strchr(entry.mnt_special, '@') != NULL)
continue;
(void) printf("%-30s %s\n", entry.mnt_special,
entry.mnt_mountp);
}
(void) fclose(mnttab);
2008-11-20 23:01:55 +03:00
} else {
zfs_handle_t *zhp;
if (argc > 1) {
(void) fprintf(stderr,
gettext("too many arguments\n"));
usage(B_FALSE);
}
if ((zhp = zfs_open(g_zfs, argv[0],
ZFS_TYPE_FILESYSTEM)) == NULL) {
2008-11-20 23:01:55 +03:00
ret = 1;
} else {
ret = share_mount_one(zhp, op, flags, SA_NO_PROTOCOL,
B_TRUE, options);
zfs_commit_shares(NULL);
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
}
}
free(options);
2008-11-20 23:01:55 +03:00
return (ret);
}
/*
* zfs mount -a
2008-11-20 23:01:55 +03:00
* zfs mount filesystem
*
* Mount all filesystems, or mount the given filesystem.
*/
static int
zfs_do_mount(int argc, char **argv)
{
return (share_mount(OP_MOUNT, argc, argv));
}
/*
* zfs share -a [nfs | smb]
2008-11-20 23:01:55 +03:00
* zfs share filesystem
*
* Share all filesystems, or share the given filesystem.
*/
static int
zfs_do_share(int argc, char **argv)
{
return (share_mount(OP_SHARE, argc, argv));
}
typedef struct unshare_unmount_node {
zfs_handle_t *un_zhp;
char *un_mountp;
uu_avl_node_t un_avlnode;
} unshare_unmount_node_t;
static int
unshare_unmount_compare(const void *larg, const void *rarg, void *unused)
{
(void) unused;
2008-11-20 23:01:55 +03:00
const unshare_unmount_node_t *l = larg;
const unshare_unmount_node_t *r = rarg;
return (strcmp(l->un_mountp, r->un_mountp));
}
/*
* Convenience routine used by zfs_do_umount() and manual_unmount(). Given an
* absolute path, find the entry /proc/self/mounts, verify that it's a
* ZFS filesystem, and unmount it appropriately.
2008-11-20 23:01:55 +03:00
*/
static int
unshare_unmount_path(int op, char *path, int flags, boolean_t is_manual)
{
zfs_handle_t *zhp;
int ret = 0;
2008-11-20 23:01:55 +03:00
struct stat64 statbuf;
struct extmnttab entry;
const char *cmdname = (op == OP_SHARE) ? "unshare" : "unmount";
ino_t path_inode;
/*
* Search for the given (major,minor) pair in the mount table.
*/
if (getextmntent(path, &entry, &statbuf) != 0) {
2008-11-20 23:01:55 +03:00
if (op == OP_SHARE) {
(void) fprintf(stderr, gettext("cannot %s '%s': not "
"currently mounted\n"), cmdname, path);
return (1);
}
(void) fprintf(stderr, gettext("warning: %s not in"
"/proc/self/mounts\n"), path);
2008-11-20 23:01:55 +03:00
if ((ret = umount2(path, flags)) != 0)
(void) fprintf(stderr, gettext("%s: %s\n"), path,
strerror(errno));
return (ret != 0);
}
path_inode = statbuf.st_ino;
2008-11-20 23:01:55 +03:00
if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0) {
(void) fprintf(stderr, gettext("cannot %s '%s': not a ZFS "
"filesystem\n"), cmdname, path);
return (1);
}
if ((zhp = zfs_open(g_zfs, entry.mnt_special,
ZFS_TYPE_FILESYSTEM)) == NULL)
return (1);
ret = 1;
if (stat64(entry.mnt_mountp, &statbuf) != 0) {
(void) fprintf(stderr, gettext("cannot %s '%s': %s\n"),
cmdname, path, strerror(errno));
goto out;
} else if (statbuf.st_ino != path_inode) {
(void) fprintf(stderr, gettext("cannot "
"%s '%s': not a mountpoint\n"), cmdname, path);
goto out;
}
2008-11-20 23:01:55 +03:00
if (op == OP_SHARE) {
char nfs_mnt_prop[ZFS_MAXPROPLEN];
char smbshare_prop[ZFS_MAXPROPLEN];
verify(zfs_prop_get(zhp, ZFS_PROP_SHARENFS, nfs_mnt_prop,
sizeof (nfs_mnt_prop), NULL, NULL, 0, B_FALSE) == 0);
verify(zfs_prop_get(zhp, ZFS_PROP_SHARESMB, smbshare_prop,
sizeof (smbshare_prop), NULL, NULL, 0, B_FALSE) == 0);
if (strcmp(nfs_mnt_prop, "off") == 0 &&
strcmp(smbshare_prop, "off") == 0) {
(void) fprintf(stderr, gettext("cannot unshare "
"'%s': legacy share\n"), path);
(void) fprintf(stderr, gettext("use exportfs(8) "
"or smbcontrol(1) to unshare this filesystem\n"));
} else if (!zfs_is_shared(zhp, NULL, NULL)) {
2008-11-20 23:01:55 +03:00
(void) fprintf(stderr, gettext("cannot unshare '%s': "
"not currently shared\n"), path);
} else {
ret = zfs_unshare(zhp, path, NULL);
zfs_commit_shares(NULL);
2008-11-20 23:01:55 +03:00
}
} else {
char mtpt_prop[ZFS_MAXPROPLEN];
verify(zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT, mtpt_prop,
sizeof (mtpt_prop), NULL, NULL, 0, B_FALSE) == 0);
if (is_manual) {
2008-11-20 23:01:55 +03:00
ret = zfs_unmount(zhp, NULL, flags);
} else if (strcmp(mtpt_prop, "legacy") == 0) {
(void) fprintf(stderr, gettext("cannot unmount "
"'%s': legacy mountpoint\n"),
zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use umount(8) "
2008-11-20 23:01:55 +03:00
"to unmount this filesystem\n"));
} else {
ret = zfs_unmountall(zhp, flags);
}
}
out:
2008-11-20 23:01:55 +03:00
zfs_close(zhp);
return (ret != 0);
}
/*
* Generic callback for unsharing or unmounting a filesystem.
*/
static int
unshare_unmount(int op, int argc, char **argv)
{
int do_all = 0;
int flags = 0;
int ret = 0;
int c;
2008-11-20 23:01:55 +03:00
zfs_handle_t *zhp;
char nfs_mnt_prop[ZFS_MAXPROPLEN];
2008-11-20 23:01:55 +03:00
char sharesmb[ZFS_MAXPROPLEN];
/* check options */
while ((c = getopt(argc, argv, op == OP_SHARE ? ":a" : "afu")) != -1) {
2008-11-20 23:01:55 +03:00
switch (c) {
case 'a':
do_all = 1;
break;
case 'f':
flags |= MS_FORCE;
break;
case 'u':
flags |= MS_CRYPT;
2008-11-20 23:01:55 +03:00
break;
case ':':
(void) fprintf(stderr, gettext("missing argument for "
"'%c' option\n"), optopt);
usage(B_FALSE);
break;
2008-11-20 23:01:55 +03:00
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (do_all) {
/*
* We could make use of zfs_for_each() to walk all datasets in
* the system, but this would be very inefficient, especially
* since we would have to linearly search /proc/self/mounts for
* each one. Instead, do one pass through /proc/self/mounts
* looking for zfs entries and call zfs_unmount() for each one.
2008-11-20 23:01:55 +03:00
*
* Things get a little tricky if the administrator has created
* mountpoints beneath other ZFS filesystems. In this case, we
* have to unmount the deepest filesystems first. To accomplish
* this, we place all the mountpoints in an AVL tree sorted by
* the special type (dataset name), and walk the result in
* reverse to make sure to get any snapshots first.
*/
FILE *mnttab;
2008-11-20 23:01:55 +03:00
struct mnttab entry;
uu_avl_pool_t *pool;
uu_avl_t *tree = NULL;
2008-11-20 23:01:55 +03:00
unshare_unmount_node_t *node;
uu_avl_index_t idx;
uu_avl_walk_t *walk;
enum sa_protocol *protocol = NULL,
single_protocol[] = {SA_NO_PROTOCOL, SA_NO_PROTOCOL};
if (op == OP_SHARE && argc > 0) {
*single_protocol = sa_protocol_decode(argv[0]);
protocol = single_protocol;
argc--;
argv++;
}
2008-11-20 23:01:55 +03:00
if (argc != 0) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
if (((pool = uu_avl_pool_create("unmount_pool",
2008-11-20 23:01:55 +03:00
sizeof (unshare_unmount_node_t),
offsetof(unshare_unmount_node_t, un_avlnode),
unshare_unmount_compare, UU_DEFAULT)) == NULL) ||
((tree = uu_avl_create(pool, NULL, UU_DEFAULT)) == NULL))
nomem();
2008-11-20 23:01:55 +03:00
if ((mnttab = fopen(MNTTAB, "re")) == NULL) {
uu_avl_destroy(tree);
uu_avl_pool_destroy(pool);
return (ENOENT);
}
while (getmntent(mnttab, &entry) == 0) {
2008-11-20 23:01:55 +03:00
/* ignore non-ZFS entries */
if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0)
continue;
/* ignore snapshots */
if (strchr(entry.mnt_special, '@') != NULL)
continue;
if ((zhp = zfs_open(g_zfs, entry.mnt_special,
ZFS_TYPE_FILESYSTEM)) == NULL) {
ret = 1;
continue;
}
/*
* Ignore datasets that are excluded/restricted by
* parent pool name.
*/
if (zpool_skip_pool(zfs_get_pool_name(zhp))) {
zfs_close(zhp);
continue;
}
2008-11-20 23:01:55 +03:00
switch (op) {
case OP_SHARE:
verify(zfs_prop_get(zhp, ZFS_PROP_SHARENFS,
nfs_mnt_prop,
sizeof (nfs_mnt_prop),
2008-11-20 23:01:55 +03:00
NULL, NULL, 0, B_FALSE) == 0);
if (strcmp(nfs_mnt_prop, "off") != 0)
2008-11-20 23:01:55 +03:00
break;
verify(zfs_prop_get(zhp, ZFS_PROP_SHARESMB,
nfs_mnt_prop,
sizeof (nfs_mnt_prop),
2008-11-20 23:01:55 +03:00
NULL, NULL, 0, B_FALSE) == 0);
if (strcmp(nfs_mnt_prop, "off") == 0)
2008-11-20 23:01:55 +03:00
continue;
break;
case OP_MOUNT:
/* Ignore legacy mounts */
verify(zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT,
nfs_mnt_prop,
sizeof (nfs_mnt_prop),
2008-11-20 23:01:55 +03:00
NULL, NULL, 0, B_FALSE) == 0);
if (strcmp(nfs_mnt_prop, "legacy") == 0)
2008-11-20 23:01:55 +03:00
continue;
/* Ignore canmount=noauto mounts */
if (zfs_prop_get_int(zhp, ZFS_PROP_CANMOUNT) ==
ZFS_CANMOUNT_NOAUTO)
continue;
break;
2008-11-20 23:01:55 +03:00
default:
break;
}
node = safe_malloc(sizeof (unshare_unmount_node_t));
node->un_zhp = zhp;
node->un_mountp = safe_strdup(entry.mnt_mountp);
2008-11-20 23:01:55 +03:00
uu_avl_node_init(node, &node->un_avlnode, pool);
if (uu_avl_find(tree, node, NULL, &idx) == NULL) {
uu_avl_insert(tree, node, idx);
} else {
zfs_close(node->un_zhp);
free(node->un_mountp);
free(node);
}
}
(void) fclose(mnttab);
2008-11-20 23:01:55 +03:00
/*
* Walk the AVL tree in reverse, unmounting each filesystem and
* removing it from the AVL tree in the process.
*/
if ((walk = uu_avl_walk_start(tree,
UU_WALK_REVERSE | UU_WALK_ROBUST)) == NULL)
nomem();
2008-11-20 23:01:55 +03:00
while ((node = uu_avl_walk_next(walk)) != NULL) {
const char *mntarg = NULL;
2008-11-20 23:01:55 +03:00
uu_avl_remove(tree, node);
2008-11-20 23:01:55 +03:00
switch (op) {
case OP_SHARE:
if (zfs_unshare(node->un_zhp,
node->un_mountp, protocol) != 0)
2008-11-20 23:01:55 +03:00
ret = 1;
break;
case OP_MOUNT:
if (zfs_unmount(node->un_zhp,
mntarg, flags) != 0)
2008-11-20 23:01:55 +03:00
ret = 1;
break;
}
zfs_close(node->un_zhp);
free(node->un_mountp);
free(node);
}
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 19:19:18 +03:00
if (op == OP_SHARE)
zfs_commit_shares(protocol);
2008-11-20 23:01:55 +03:00
uu_avl_walk_end(walk);
uu_avl_destroy(tree);
uu_avl_pool_destroy(pool);
} else {
if (argc != 1) {
if (argc == 0)
(void) fprintf(stderr,
gettext("missing filesystem argument\n"));
else
(void) fprintf(stderr,
gettext("too many arguments\n"));
usage(B_FALSE);
}
/*
* We have an argument, but it may be a full path or a ZFS
* filesystem. Pass full paths off to unmount_path() (shared by
* manual_unmount), otherwise open the filesystem and pass to
* zfs_unmount().
*/
if (argv[0][0] == '/')
return (unshare_unmount_path(op, argv[0],
flags, B_FALSE));
if ((zhp = zfs_open(g_zfs, argv[0],
ZFS_TYPE_FILESYSTEM)) == NULL)
2008-11-20 23:01:55 +03:00
return (1);
verify(zfs_prop_get(zhp, op == OP_SHARE ?
ZFS_PROP_SHARENFS : ZFS_PROP_MOUNTPOINT,
nfs_mnt_prop, sizeof (nfs_mnt_prop), NULL,
NULL, 0, B_FALSE) == 0);
2008-11-20 23:01:55 +03:00
switch (op) {
case OP_SHARE:
verify(zfs_prop_get(zhp, ZFS_PROP_SHARENFS,
nfs_mnt_prop,
sizeof (nfs_mnt_prop),
NULL, NULL, 0, B_FALSE) == 0);
verify(zfs_prop_get(zhp, ZFS_PROP_SHARESMB,
sharesmb, sizeof (sharesmb), NULL, NULL,
0, B_FALSE) == 0);
if (strcmp(nfs_mnt_prop, "off") == 0 &&
strcmp(sharesmb, "off") == 0) {
(void) fprintf(stderr, gettext("cannot "
"unshare '%s': legacy share\n"),
zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use "
"exports(5) or smb.conf(5) to unshare "
"this filesystem\n"));
ret = 1;
} else if (!zfs_is_shared(zhp, NULL, NULL)) {
(void) fprintf(stderr, gettext("cannot "
"unshare '%s': not currently "
"shared\n"), zfs_get_name(zhp));
ret = 1;
} else if (zfs_unshareall(zhp, NULL) != 0) {
ret = 1;
}
break;
2008-11-20 23:01:55 +03:00
case OP_MOUNT:
if (strcmp(nfs_mnt_prop, "legacy") == 0) {
(void) fprintf(stderr, gettext("cannot "
"unmount '%s': legacy "
"mountpoint\n"), zfs_get_name(zhp));
(void) fprintf(stderr, gettext("use "
"umount(8) to unmount this "
"filesystem\n"));
ret = 1;
} else if (!zfs_is_mounted(zhp, NULL)) {
(void) fprintf(stderr, gettext("cannot "
"unmount '%s': not currently "
"mounted\n"),
zfs_get_name(zhp));
ret = 1;
} else if (zfs_unmountall(zhp, flags) != 0) {
ret = 1;
2008-11-20 23:01:55 +03:00
}
break;
2008-11-20 23:01:55 +03:00
}
zfs_close(zhp);
}
return (ret);
}
/*
* zfs unmount [-fu] -a
* zfs unmount [-fu] filesystem
2008-11-20 23:01:55 +03:00
*
* Unmount all filesystems, or a specific ZFS filesystem.
*/
static int
zfs_do_unmount(int argc, char **argv)
{
return (unshare_unmount(OP_MOUNT, argc, argv));
}
/*
* zfs unshare -a
* zfs unshare filesystem
*
* Unshare all filesystems, or a specific ZFS filesystem.
*/
static int
zfs_do_unshare(int argc, char **argv)
{
return (unshare_unmount(OP_SHARE, argc, argv));
}
static int
find_command_idx(const char *command, int *idx)
2008-11-20 23:01:55 +03:00
{
int i;
for (i = 0; i < NCOMMAND; i++) {
if (command_table[i].name == NULL)
continue;
if (strcmp(command, command_table[i].name) == 0) {
*idx = i;
return (0);
}
}
return (1);
}
static int
zfs_do_diff(int argc, char **argv)
{
zfs_handle_t *zhp;
int flags = 0;
char *tosnap = NULL;
char *fromsnap = NULL;
char *atp, *copy;
int err = 0;
int c;
struct sigaction sa;
while ((c = getopt(argc, argv, "FHth")) != -1) {
switch (c) {
case 'F':
flags |= ZFS_DIFF_CLASSIFY;
break;
case 'H':
flags |= ZFS_DIFF_PARSEABLE;
break;
case 't':
flags |= ZFS_DIFF_TIMESTAMP;
break;
case 'h':
flags |= ZFS_DIFF_NO_MANGLE;
break;
default:
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (argc < 1) {
(void) fprintf(stderr,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
gettext("must provide at least one snapshot name\n"));
usage(B_FALSE);
}
if (argc > 2) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
fromsnap = argv[0];
tosnap = (argc == 2) ? argv[1] : NULL;
copy = NULL;
if (*fromsnap != '@')
copy = strdup(fromsnap);
else if (tosnap)
copy = strdup(tosnap);
if (copy == NULL)
usage(B_FALSE);
if ((atp = strchr(copy, '@')) != NULL)
*atp = '\0';
if ((zhp = zfs_open(g_zfs, copy, ZFS_TYPE_FILESYSTEM)) == NULL) {
free(copy);
return (1);
}
free(copy);
/*
* Ignore SIGPIPE so that the library can give us
* information on any failure
*/
if (sigemptyset(&sa.sa_mask) == -1) {
err = errno;
goto out;
}
sa.sa_flags = 0;
sa.sa_handler = SIG_IGN;
if (sigaction(SIGPIPE, &sa, NULL) == -1) {
err = errno;
goto out;
}
err = zfs_show_diffs(zhp, STDOUT_FILENO, fromsnap, tosnap, flags);
out:
zfs_close(zhp);
return (err != 0);
}
/*
* zfs bookmark <fs@source>|<fs#source> <fs#bookmark>
*
* Creates a bookmark with the given name from the source snapshot
* or creates a copy of an existing source bookmark.
*/
static int
zfs_do_bookmark(int argc, char **argv)
{
char *source, *bookname;
char expbuf[ZFS_MAX_DATASET_NAME_LEN];
int source_type;
nvlist_t *nvl;
int ret = 0;
int c;
/* check options */
while ((c = getopt(argc, argv, "")) != -1) {
switch (c) {
case '?':
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
goto usage;
}
}
argc -= optind;
argv += optind;
/* check number of arguments */
if (argc < 1) {
(void) fprintf(stderr, gettext("missing source argument\n"));
goto usage;
}
if (argc < 2) {
(void) fprintf(stderr, gettext("missing bookmark argument\n"));
goto usage;
}
source = argv[0];
bookname = argv[1];
if (strchr(source, '@') == NULL && strchr(source, '#') == NULL) {
(void) fprintf(stderr,
gettext("invalid source name '%s': "
"must contain a '@' or '#'\n"), source);
goto usage;
}
if (strchr(bookname, '#') == NULL) {
(void) fprintf(stderr,
gettext("invalid bookmark name '%s': "
"must contain a '#'\n"), bookname);
goto usage;
}
/*
* expand source or bookname to full path:
* one of them may be specified as short name
*/
{
char **expand;
char *source_short, *bookname_short;
source_short = strpbrk(source, "@#");
bookname_short = strpbrk(bookname, "#");
if (source_short == source &&
bookname_short == bookname) {
(void) fprintf(stderr, gettext(
"either source or bookmark must be specified as "
"full dataset paths"));
goto usage;
} else if (source_short != source &&
bookname_short != bookname) {
expand = NULL;
} else if (source_short != source) {
strlcpy(expbuf, source, sizeof (expbuf));
expand = &bookname;
} else if (bookname_short != bookname) {
strlcpy(expbuf, bookname, sizeof (expbuf));
expand = &source;
} else {
abort();
}
if (expand != NULL) {
*strpbrk(expbuf, "@#") = '\0'; /* dataset name in buf */
(void) strlcat(expbuf, *expand, sizeof (expbuf));
*expand = expbuf;
}
}
/* determine source type */
switch (*strpbrk(source, "@#")) {
case '@': source_type = ZFS_TYPE_SNAPSHOT; break;
case '#': source_type = ZFS_TYPE_BOOKMARK; break;
default: abort();
}
/* test the source exists */
zfs_handle_t *zhp;
zhp = zfs_open(g_zfs, source, source_type);
if (zhp == NULL)
goto usage;
zfs_close(zhp);
nvl = fnvlist_alloc();
fnvlist_add_string(nvl, bookname, source);
ret = lzc_bookmark(nvl, NULL);
fnvlist_free(nvl);
if (ret != 0) {
const char *err_msg = NULL;
char errbuf[1024];
(void) snprintf(errbuf, sizeof (errbuf),
dgettext(TEXT_DOMAIN,
"cannot create bookmark '%s'"), bookname);
switch (ret) {
case EXDEV:
err_msg = "bookmark is in a different pool";
break;
case ZFS_ERR_BOOKMARK_SOURCE_NOT_ANCESTOR:
err_msg = "source is not an ancestor of the "
"new bookmark's dataset";
break;
case EEXIST:
err_msg = "bookmark exists";
break;
case EINVAL:
err_msg = "invalid argument";
break;
case ENOTSUP:
err_msg = "bookmark feature not enabled";
break;
case ENOSPC:
err_msg = "out of space";
break;
case ENOENT:
err_msg = "dataset does not exist";
break;
default:
(void) zfs_standard_error(g_zfs, ret, errbuf);
break;
}
if (err_msg != NULL) {
(void) fprintf(stderr, "%s: %s\n", errbuf,
dgettext(TEXT_DOMAIN, err_msg));
}
}
return (ret != 0);
usage:
usage(B_FALSE);
return (-1);
}
static int
zfs_do_channel_program(int argc, char **argv)
{
int ret, fd, c;
size_t progsize, progread;
nvlist_t *outnvl = NULL;
uint64_t instrlimit = ZCP_DEFAULT_INSTRLIMIT;
uint64_t memlimit = ZCP_DEFAULT_MEMLIMIT;
boolean_t sync_flag = B_TRUE, json_output = B_FALSE;
zpool_handle_t *zhp;
/* check options */
while ((c = getopt(argc, argv, "nt:m:j")) != -1) {
switch (c) {
case 't':
case 'm': {
uint64_t arg;
char *endp;
errno = 0;
arg = strtoull(optarg, &endp, 0);
if (errno != 0 || *endp != '\0') {
(void) fprintf(stderr, gettext(
"invalid argument "
"'%s': expected integer\n"), optarg);
goto usage;
}
if (c == 't') {
instrlimit = arg;
} else {
ASSERT3U(c, ==, 'm');
memlimit = arg;
}
break;
}
OpenZFS 8677 - Open-Context Channel Programs Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Chris Williamson <chris.williamson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
2018-02-08 19:35:09 +03:00
case 'n': {
sync_flag = B_FALSE;
break;
}
case 'j': {
json_output = B_TRUE;
break;
}
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
goto usage;
}
}
argc -= optind;
argv += optind;
if (argc < 2) {
(void) fprintf(stderr,
gettext("invalid number of arguments\n"));
goto usage;
}
const char *poolname = argv[0];
const char *filename = argv[1];
if (strcmp(filename, "-") == 0) {
fd = 0;
filename = "standard input";
} else if ((fd = open(filename, O_RDONLY)) < 0) {
(void) fprintf(stderr, gettext("cannot open '%s': %s\n"),
filename, strerror(errno));
return (1);
}
if ((zhp = zpool_open(g_zfs, poolname)) == NULL) {
(void) fprintf(stderr, gettext("cannot open pool '%s'\n"),
poolname);
if (fd != 0)
(void) close(fd);
return (1);
}
zpool_close(zhp);
/*
* Read in the channel program, expanding the program buffer as
* necessary.
*/
progread = 0;
progsize = 1024;
char *progbuf = safe_malloc(progsize);
do {
ret = read(fd, progbuf + progread, progsize - progread);
progread += ret;
if (progread == progsize && ret > 0) {
progsize *= 2;
progbuf = safe_realloc(progbuf, progsize);
}
} while (ret > 0);
if (fd != 0)
(void) close(fd);
if (ret < 0) {
free(progbuf);
(void) fprintf(stderr,
gettext("cannot read '%s': %s\n"),
filename, strerror(errno));
return (1);
}
progbuf[progread] = '\0';
/*
* Any remaining arguments are passed as arguments to the lua script as
* a string array:
* {
* "argv" -> [ "arg 1", ... "arg n" ],
* }
*/
nvlist_t *argnvl = fnvlist_alloc();
fnvlist_add_string_array(argnvl, ZCP_ARG_CLIARGV,
(const char **)argv + 2, argc - 2);
OpenZFS 8677 - Open-Context Channel Programs Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Chris Williamson <chris.williamson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
2018-02-08 19:35:09 +03:00
if (sync_flag) {
ret = lzc_channel_program(poolname, progbuf,
instrlimit, memlimit, argnvl, &outnvl);
} else {
ret = lzc_channel_program_nosync(poolname, progbuf,
instrlimit, memlimit, argnvl, &outnvl);
}
if (ret != 0) {
/*
* On error, report the error message handed back by lua if one
* exists. Otherwise, generate an appropriate error message,
* falling back on strerror() for an unexpected return code.
*/
const char *errstring = NULL;
const char *msg = gettext("Channel program execution failed");
uint64_t instructions = 0;
if (outnvl != NULL && nvlist_exists(outnvl, ZCP_RET_ERROR)) {
char *es = NULL;
(void) nvlist_lookup_string(outnvl,
ZCP_RET_ERROR, &es);
if (es == NULL)
errstring = strerror(ret);
else
errstring = es;
if (ret == ETIME) {
(void) nvlist_lookup_uint64(outnvl,
ZCP_ARG_INSTRLIMIT, &instructions);
}
} else {
switch (ret) {
case EINVAL:
errstring =
"Invalid instruction or memory limit.";
break;
case ENOMEM:
errstring = "Return value too large.";
break;
case ENOSPC:
errstring = "Memory limit exhausted.";
break;
case ETIME:
errstring = "Timed out.";
break;
case EPERM:
errstring = "Permission denied. Channel "
"programs must be run as root.";
break;
default:
(void) zfs_standard_error(g_zfs, ret, msg);
}
}
if (errstring != NULL)
(void) fprintf(stderr, "%s:\n%s\n", msg, errstring);
if (ret == ETIME && instructions != 0)
(void) fprintf(stderr,
gettext("%llu Lua instructions\n"),
(u_longlong_t)instructions);
} else {
if (json_output) {
(void) nvlist_print_json(stdout, outnvl);
} else if (nvlist_empty(outnvl)) {
(void) fprintf(stdout, gettext("Channel program fully "
"executed and did not produce output.\n"));
} else {
(void) fprintf(stdout, gettext("Channel program fully "
"executed and produced output:\n"));
dump_nvlist(outnvl, 4);
}
}
free(progbuf);
fnvlist_free(outnvl);
fnvlist_free(argnvl);
return (ret != 0);
usage:
usage(B_FALSE);
return (-1);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
typedef struct loadkey_cbdata {
boolean_t cb_loadkey;
boolean_t cb_recursive;
boolean_t cb_noop;
char *cb_keylocation;
uint64_t cb_numfailed;
uint64_t cb_numattempted;
} loadkey_cbdata_t;
static int
load_key_callback(zfs_handle_t *zhp, void *data)
{
int ret;
boolean_t is_encroot;
loadkey_cbdata_t *cb = data;
uint64_t keystatus = zfs_prop_get_int(zhp, ZFS_PROP_KEYSTATUS);
/*
* If we are working recursively, we want to skip loading / unloading
* keys for non-encryption roots and datasets whose keys are already
* in the desired end-state.
*/
if (cb->cb_recursive) {
ret = zfs_crypto_get_encryption_root(zhp, &is_encroot, NULL);
if (ret != 0)
return (ret);
if (!is_encroot)
return (0);
if ((cb->cb_loadkey && keystatus == ZFS_KEYSTATUS_AVAILABLE) ||
(!cb->cb_loadkey && keystatus == ZFS_KEYSTATUS_UNAVAILABLE))
return (0);
}
cb->cb_numattempted++;
if (cb->cb_loadkey)
ret = zfs_crypto_load_key(zhp, cb->cb_noop, cb->cb_keylocation);
else
ret = zfs_crypto_unload_key(zhp);
if (ret != 0) {
cb->cb_numfailed++;
return (ret);
}
return (0);
}
static int
load_unload_keys(int argc, char **argv, boolean_t loadkey)
{
int c, ret = 0, flags = 0;
boolean_t do_all = B_FALSE;
loadkey_cbdata_t cb = { 0 };
cb.cb_loadkey = loadkey;
while ((c = getopt(argc, argv, "anrL:")) != -1) {
/* noop and alternate keylocations only apply to zfs load-key */
if (loadkey) {
switch (c) {
case 'n':
cb.cb_noop = B_TRUE;
continue;
case 'L':
cb.cb_keylocation = optarg;
continue;
default:
break;
}
}
switch (c) {
case 'a':
do_all = B_TRUE;
cb.cb_recursive = B_TRUE;
break;
case 'r':
flags |= ZFS_ITER_RECURSE;
cb.cb_recursive = B_TRUE;
break;
default:
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (!do_all && argc == 0) {
(void) fprintf(stderr,
gettext("Missing dataset argument or -a option\n"));
usage(B_FALSE);
}
if (do_all && argc != 0) {
(void) fprintf(stderr,
gettext("Cannot specify dataset with -a option\n"));
usage(B_FALSE);
}
if (cb.cb_recursive && cb.cb_keylocation != NULL &&
strcmp(cb.cb_keylocation, "prompt") != 0) {
(void) fprintf(stderr, gettext("alternate keylocation may only "
"be 'prompt' with -r or -a\n"));
usage(B_FALSE);
}
ret = zfs_for_each(argc, argv, flags,
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, NULL, NULL, 0,
load_key_callback, &cb);
if (cb.cb_noop || (cb.cb_recursive && cb.cb_numattempted != 0)) {
(void) printf(gettext("%llu / %llu key(s) successfully %s\n"),
(u_longlong_t)(cb.cb_numattempted - cb.cb_numfailed),
(u_longlong_t)cb.cb_numattempted,
loadkey ? (cb.cb_noop ? "verified" : "loaded") :
"unloaded");
}
if (cb.cb_numfailed != 0)
ret = -1;
return (ret);
}
static int
zfs_do_load_key(int argc, char **argv)
{
return (load_unload_keys(argc, argv, B_TRUE));
}
static int
zfs_do_unload_key(int argc, char **argv)
{
return (load_unload_keys(argc, argv, B_FALSE));
}
static int
zfs_do_change_key(int argc, char **argv)
{
int c, ret;
uint64_t keystatus;
boolean_t loadkey = B_FALSE, inheritkey = B_FALSE;
zfs_handle_t *zhp = NULL;
nvlist_t *props = fnvlist_alloc();
while ((c = getopt(argc, argv, "lio:")) != -1) {
switch (c) {
case 'l':
loadkey = B_TRUE;
break;
case 'i':
inheritkey = B_TRUE;
break;
case 'o':
if (!parseprop(props, optarg)) {
nvlist_free(props);
return (1);
}
break;
default:
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
usage(B_FALSE);
}
}
if (inheritkey && !nvlist_empty(props)) {
(void) fprintf(stderr,
gettext("Properties not allowed for inheriting\n"));
usage(B_FALSE);
}
argc -= optind;
argv += optind;
if (argc < 1) {
(void) fprintf(stderr, gettext("Missing dataset argument\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("Too many arguments\n"));
usage(B_FALSE);
}
zhp = zfs_open(g_zfs, argv[argc - 1],
ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
if (zhp == NULL)
usage(B_FALSE);
if (loadkey) {
keystatus = zfs_prop_get_int(zhp, ZFS_PROP_KEYSTATUS);
if (keystatus != ZFS_KEYSTATUS_AVAILABLE) {
ret = zfs_crypto_load_key(zhp, B_FALSE, NULL);
if (ret != 0) {
nvlist_free(props);
zfs_close(zhp);
return (-1);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
}
/* refresh the properties so the new keystatus is visible */
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
zfs_refresh_properties(zhp);
}
ret = zfs_crypto_rewrap(zhp, props, inheritkey);
if (ret != 0) {
nvlist_free(props);
zfs_close(zhp);
return (-1);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
nvlist_free(props);
zfs_close(zhp);
return (0);
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
/*
* 1) zfs project [-d|-r] <file|directory ...>
* List project ID and inherit flag of file(s) or directories.
* -d: List the directory itself, not its children.
* -r: List subdirectories recursively.
*
* 2) zfs project -C [-k] [-r] <file|directory ...>
* Clear project inherit flag and/or ID on the file(s) or directories.
* -k: Keep the project ID unchanged. If not specified, the project ID
* will be reset as zero.
* -r: Clear on subdirectories recursively.
*
* 3) zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
* Check project ID and inherit flag on the file(s) or directories,
* report the outliers.
* -0: Print file name followed by a NUL instead of newline.
* -d: Check the directory itself, not its children.
* -p: Specify the referenced ID for comparing with the target file(s)
* or directories' project IDs. If not specified, the target (top)
* directory's project ID will be used as the referenced one.
* -r: Check subdirectories recursively.
*
* 4) zfs project [-p id] [-r] [-s] <file|directory ...>
* Set project ID and/or inherit flag on the file(s) or directories.
* -p: Set the project ID as the given id.
* -r: Set on subdirectories recursively. If not specify "-p" option,
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
* it will use top-level directory's project ID as the given id,
* then set both project ID and inherit flag on all descendants
* of the top-level directory.
* -s: Set project inherit flag.
*/
static int
zfs_do_project(int argc, char **argv)
{
zfs_project_control_t zpc = {
.zpc_expected_projid = ZFS_INVALID_PROJID,
.zpc_op = ZFS_PROJECT_OP_DEFAULT,
.zpc_dironly = B_FALSE,
.zpc_keep_projid = B_FALSE,
.zpc_newline = B_TRUE,
.zpc_recursive = B_FALSE,
.zpc_set_flag = B_FALSE,
};
int ret = 0, c;
if (argc < 2)
usage(B_FALSE);
while ((c = getopt(argc, argv, "0Ccdkp:rs")) != -1) {
switch (c) {
case '0':
zpc.zpc_newline = B_FALSE;
break;
case 'C':
if (zpc.zpc_op != ZFS_PROJECT_OP_DEFAULT) {
(void) fprintf(stderr, gettext("cannot "
"specify '-C' '-c' '-s' together\n"));
usage(B_FALSE);
}
zpc.zpc_op = ZFS_PROJECT_OP_CLEAR;
break;
case 'c':
if (zpc.zpc_op != ZFS_PROJECT_OP_DEFAULT) {
(void) fprintf(stderr, gettext("cannot "
"specify '-C' '-c' '-s' together\n"));
usage(B_FALSE);
}
zpc.zpc_op = ZFS_PROJECT_OP_CHECK;
break;
case 'd':
zpc.zpc_dironly = B_TRUE;
/* overwrite "-r" option */
zpc.zpc_recursive = B_FALSE;
break;
case 'k':
zpc.zpc_keep_projid = B_TRUE;
break;
case 'p': {
char *endptr;
errno = 0;
zpc.zpc_expected_projid = strtoull(optarg, &endptr, 0);
if (errno != 0 || *endptr != '\0') {
(void) fprintf(stderr,
gettext("project ID must be less than "
"%u\n"), UINT32_MAX);
usage(B_FALSE);
}
if (zpc.zpc_expected_projid >= UINT32_MAX) {
(void) fprintf(stderr,
gettext("invalid project ID\n"));
usage(B_FALSE);
}
break;
}
case 'r':
zpc.zpc_recursive = B_TRUE;
/* overwrite "-d" option */
zpc.zpc_dironly = B_FALSE;
break;
case 's':
if (zpc.zpc_op != ZFS_PROJECT_OP_DEFAULT) {
(void) fprintf(stderr, gettext("cannot "
"specify '-C' '-c' '-s' together\n"));
usage(B_FALSE);
}
zpc.zpc_set_flag = B_TRUE;
zpc.zpc_op = ZFS_PROJECT_OP_SET;
break;
default:
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
if (zpc.zpc_op == ZFS_PROJECT_OP_DEFAULT) {
if (zpc.zpc_expected_projid != ZFS_INVALID_PROJID)
zpc.zpc_op = ZFS_PROJECT_OP_SET;
else
zpc.zpc_op = ZFS_PROJECT_OP_LIST;
}
switch (zpc.zpc_op) {
case ZFS_PROJECT_OP_LIST:
if (zpc.zpc_keep_projid) {
(void) fprintf(stderr,
gettext("'-k' is only valid together with '-C'\n"));
usage(B_FALSE);
}
if (!zpc.zpc_newline) {
(void) fprintf(stderr,
gettext("'-0' is only valid together with '-c'\n"));
usage(B_FALSE);
}
break;
case ZFS_PROJECT_OP_CHECK:
if (zpc.zpc_keep_projid) {
(void) fprintf(stderr,
gettext("'-k' is only valid together with '-C'\n"));
usage(B_FALSE);
}
break;
case ZFS_PROJECT_OP_CLEAR:
if (zpc.zpc_dironly) {
(void) fprintf(stderr,
gettext("'-d' is useless together with '-C'\n"));
usage(B_FALSE);
}
if (!zpc.zpc_newline) {
(void) fprintf(stderr,
gettext("'-0' is only valid together with '-c'\n"));
usage(B_FALSE);
}
if (zpc.zpc_expected_projid != ZFS_INVALID_PROJID) {
(void) fprintf(stderr,
gettext("'-p' is useless together with '-C'\n"));
usage(B_FALSE);
}
break;
case ZFS_PROJECT_OP_SET:
if (zpc.zpc_dironly) {
(void) fprintf(stderr,
gettext("'-d' is useless for set project ID and/or "
"inherit flag\n"));
usage(B_FALSE);
}
if (zpc.zpc_keep_projid) {
(void) fprintf(stderr,
gettext("'-k' is only valid together with '-C'\n"));
usage(B_FALSE);
}
if (!zpc.zpc_newline) {
(void) fprintf(stderr,
gettext("'-0' is only valid together with '-c'\n"));
usage(B_FALSE);
}
break;
default:
ASSERT(0);
break;
}
argv += optind;
argc -= optind;
if (argc == 0) {
(void) fprintf(stderr,
gettext("missing file or directory target(s)\n"));
usage(B_FALSE);
}
for (int i = 0; i < argc; i++) {
int err;
err = zfs_project_handle(argv[i], &zpc);
if (err && !ret)
ret = err;
}
return (ret);
}
static int
zfs_do_wait(int argc, char **argv)
{
boolean_t enabled[ZFS_WAIT_NUM_ACTIVITIES];
int error, i;
int c;
/* By default, wait for all types of activity. */
for (i = 0; i < ZFS_WAIT_NUM_ACTIVITIES; i++)
enabled[i] = B_TRUE;
while ((c = getopt(argc, argv, "t:")) != -1) {
switch (c) {
case 't':
/* Reset activities array */
memset(&enabled, 0, sizeof (enabled));
for (char *tok; (tok = strsep(&optarg, ",")); ) {
static const char *const col_subopts[
ZFS_WAIT_NUM_ACTIVITIES] = { "deleteq" };
for (i = 0; i < ARRAY_SIZE(col_subopts); ++i)
if (strcmp(tok, col_subopts[i]) == 0) {
enabled[i] = B_TRUE;
goto found;
}
(void) fprintf(stderr,
gettext("invalid activity '%s'\n"), tok);
usage(B_FALSE);
found:;
}
break;
case '?':
(void) fprintf(stderr, gettext("invalid option '%c'\n"),
optopt);
usage(B_FALSE);
}
}
argv += optind;
argc -= optind;
if (argc < 1) {
(void) fprintf(stderr, gettext("missing 'filesystem' "
"argument\n"));
usage(B_FALSE);
}
if (argc > 1) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
zfs_handle_t *zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_FILESYSTEM);
if (zhp == NULL)
return (1);
for (;;) {
boolean_t missing = B_FALSE;
boolean_t any_waited = B_FALSE;
for (int i = 0; i < ZFS_WAIT_NUM_ACTIVITIES; i++) {
boolean_t waited;
if (!enabled[i])
continue;
error = zfs_wait_status(zhp, i, &missing, &waited);
if (error != 0 || missing)
break;
any_waited = (any_waited || waited);
}
if (error != 0 || missing || !any_waited)
break;
}
zfs_close(zhp);
return (error);
}
/*
* Display version message
*/
static int
zfs_do_version(int argc, char **argv)
{
(void) argc, (void) argv;
return (zfs_version_print() != 0);
}
2008-11-20 23:01:55 +03:00
int
main(int argc, char **argv)
{
int ret = 0;
int i = 0;
const char *cmdname;
char **newargv;
2008-11-20 23:01:55 +03:00
(void) setlocale(LC_ALL, "");
(void) setlocale(LC_NUMERIC, "C");
2008-11-20 23:01:55 +03:00
(void) textdomain(TEXT_DOMAIN);
opterr = 0;
/*
* Make sure the user has specified some command.
2008-11-20 23:01:55 +03:00
*/
if (argc < 2) {
(void) fprintf(stderr, gettext("missing command\n"));
usage(B_FALSE);
}
2008-11-20 23:01:55 +03:00
cmdname = argv[1];
2008-11-20 23:01:55 +03:00
/*
* The 'umount' command is an alias for 'unmount'
*/
if (strcmp(cmdname, "umount") == 0)
cmdname = "unmount";
2008-11-20 23:01:55 +03:00
/*
* The 'recv' command is an alias for 'receive'
*/
if (strcmp(cmdname, "recv") == 0)
cmdname = "receive";
2008-11-20 23:01:55 +03:00
/*
* The 'snap' command is an alias for 'snapshot'
*/
if (strcmp(cmdname, "snap") == 0)
cmdname = "snapshot";
/*
* Special case '-?'
*/
if ((strcmp(cmdname, "-?") == 0) ||
(strcmp(cmdname, "--help") == 0))
usage(B_TRUE);
2008-11-20 23:01:55 +03:00
/*
* Special case '-V|--version'
*/
if ((strcmp(cmdname, "-V") == 0) || (strcmp(cmdname, "--version") == 0))
return (zfs_do_version(argc, argv));
if ((g_zfs = libzfs_init()) == NULL) {
(void) fprintf(stderr, "%s\n", libzfs_error_init(errno));
return (1);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
zfs_save_arguments(argc, argv, history_str, sizeof (history_str));
libzfs_print_on_error(g_zfs, B_TRUE);
/*
* Many commands modify input strings for string parsing reasons.
* We create a copy to protect the original argv.
*/
newargv = safe_malloc((argc + 1) * sizeof (newargv[0]));
for (i = 0; i < argc; i++)
newargv[i] = strdup(argv[i]);
newargv[argc] = NULL;
/*
* Run the appropriate command.
*/
libzfs_mnttab_cache(g_zfs, B_TRUE);
if (find_command_idx(cmdname, &i) == 0) {
current_command = &command_table[i];
ret = command_table[i].func(argc - 1, newargv + 1);
} else if (strchr(cmdname, '=') != NULL) {
verify(find_command_idx("set", &i) == 0);
current_command = &command_table[i];
ret = command_table[i].func(argc, newargv);
} else {
(void) fprintf(stderr, gettext("unrecognized "
"command '%s'\n"), cmdname);
usage(B_FALSE);
ret = 1;
2008-11-20 23:01:55 +03:00
}
for (i = 0; i < argc; i++)
free(newargv[i]);
free(newargv);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
if (ret == 0 && log_history)
(void) zpool_log_history(g_zfs, history_str);
libzfs_fini(g_zfs);
2008-11-20 23:01:55 +03:00
/*
* The 'ZFS_ABORT' environment variable causes us to dump core on exit
* for the purposes of running ::findleaks.
*/
if (getenv("ZFS_ABORT") != NULL) {
(void) printf("dumping core by request\n");
abort();
}
return (ret);
}
/*
* zfs zone nsfile filesystem
*
* Add or delete the given dataset to/from the namespace.
*/
#ifdef __linux__
static int
zfs_do_zone_impl(int argc, char **argv, boolean_t attach)
{
zfs_handle_t *zhp;
int ret;
if (argc < 3) {
(void) fprintf(stderr, gettext("missing argument(s)\n"));
usage(B_FALSE);
}
if (argc > 3) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
zhp = zfs_open(g_zfs, argv[2], ZFS_TYPE_FILESYSTEM);
if (zhp == NULL)
return (1);
ret = (zfs_userns(zhp, argv[1], attach) != 0);
zfs_close(zhp);
return (ret);
}
static int
zfs_do_zone(int argc, char **argv)
{
return (zfs_do_zone_impl(argc, argv, B_TRUE));
}
static int
zfs_do_unzone(int argc, char **argv)
{
return (zfs_do_zone_impl(argc, argv, B_FALSE));
}
#endif
#ifdef __FreeBSD__
#include <sys/jail.h>
#include <jail.h>
/*
* Attach/detach the given dataset to/from the given jail
*/
static int
zfs_do_jail_impl(int argc, char **argv, boolean_t attach)
{
zfs_handle_t *zhp;
int jailid, ret;
/* check number of arguments */
if (argc < 3) {
(void) fprintf(stderr, gettext("missing argument(s)\n"));
usage(B_FALSE);
}
if (argc > 3) {
(void) fprintf(stderr, gettext("too many arguments\n"));
usage(B_FALSE);
}
jailid = jail_getid(argv[1]);
if (jailid < 0) {
(void) fprintf(stderr, gettext("invalid jail id or name\n"));
usage(B_FALSE);
}
zhp = zfs_open(g_zfs, argv[2], ZFS_TYPE_FILESYSTEM);
if (zhp == NULL)
return (1);
ret = (zfs_jail(zhp, jailid, attach) != 0);
zfs_close(zhp);
return (ret);
}
/*
* zfs jail jailid filesystem
*
* Attach the given dataset to the given jail
*/
static int
zfs_do_jail(int argc, char **argv)
{
return (zfs_do_jail_impl(argc, argv, B_TRUE));
}
/*
* zfs unjail jailid filesystem
*
* Detach the given dataset from the given jail
*/
static int
zfs_do_unjail(int argc, char **argv)
{
return (zfs_do_jail_impl(argc, argv, B_FALSE));
}
#endif