4342 lines
107 KiB
Bash
Executable File
4342 lines
107 KiB
Bash
Executable File
#!/bin/bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Copyright (c) 2019 David Ahern <dsahern@gmail.com>. All rights reserved.
|
|
#
|
|
# IPv4 and IPv6 functional tests focusing on VRF and routing lookups
|
|
# for various permutations:
|
|
# 1. icmp, tcp, udp and netfilter
|
|
# 2. client, server, no-server
|
|
# 3. global address on interface
|
|
# 4. global address on 'lo'
|
|
# 5. remote and local traffic
|
|
# 6. VRF and non-VRF permutations
|
|
#
|
|
# Setup:
|
|
# ns-A | ns-B
|
|
# No VRF case:
|
|
# [ lo ] [ eth1 ]---|---[ eth1 ] [ lo ]
|
|
# remote address
|
|
# VRF case:
|
|
# [ red ]---[ eth1 ]---|---[ eth1 ] [ lo ]
|
|
#
|
|
# ns-A:
|
|
# eth1: 172.16.1.1/24, 2001:db8:1::1/64
|
|
# lo: 127.0.0.1/8, ::1/128
|
|
# 172.16.2.1/32, 2001:db8:2::1/128
|
|
# red: 127.0.0.1/8, ::1/128
|
|
# 172.16.3.1/32, 2001:db8:3::1/128
|
|
#
|
|
# ns-B:
|
|
# eth1: 172.16.1.2/24, 2001:db8:1::2/64
|
|
# lo2: 127.0.0.1/8, ::1/128
|
|
# 172.16.2.2/32, 2001:db8:2::2/128
|
|
#
|
|
# ns-A to ns-C connection - only for VRF and same config
|
|
# as ns-A to ns-B
|
|
#
|
|
# server / client nomenclature relative to ns-A
|
|
|
|
source lib.sh
|
|
VERBOSE=0
|
|
|
|
NSA_DEV=eth1
|
|
NSA_DEV2=eth2
|
|
NSB_DEV=eth1
|
|
NSC_DEV=eth2
|
|
VRF=red
|
|
VRF_TABLE=1101
|
|
|
|
# IPv4 config
|
|
NSA_IP=172.16.1.1
|
|
NSB_IP=172.16.1.2
|
|
VRF_IP=172.16.3.1
|
|
NS_NET=172.16.1.0/24
|
|
|
|
# IPv6 config
|
|
NSA_IP6=2001:db8:1::1
|
|
NSB_IP6=2001:db8:1::2
|
|
VRF_IP6=2001:db8:3::1
|
|
NS_NET6=2001:db8:1::/120
|
|
|
|
NSA_LO_IP=172.16.2.1
|
|
NSB_LO_IP=172.16.2.2
|
|
NSA_LO_IP6=2001:db8:2::1
|
|
NSB_LO_IP6=2001:db8:2::2
|
|
|
|
# non-local addresses for freebind tests
|
|
NL_IP=172.17.1.1
|
|
NL_IP6=2001:db8:4::1
|
|
|
|
# multicast and broadcast addresses
|
|
MCAST_IP=224.0.0.1
|
|
BCAST_IP=255.255.255.255
|
|
|
|
MD5_PW=abc123
|
|
MD5_WRONG_PW=abc1234
|
|
|
|
MCAST=ff02::1
|
|
# set after namespace create
|
|
NSA_LINKIP6=
|
|
NSB_LINKIP6=
|
|
|
|
which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
|
|
|
|
# Check if FIPS mode is enabled
|
|
if [ -f /proc/sys/crypto/fips_enabled ]; then
|
|
fips_enabled=`cat /proc/sys/crypto/fips_enabled`
|
|
else
|
|
fips_enabled=0
|
|
fi
|
|
|
|
################################################################################
|
|
# utilities
|
|
|
|
log_test()
|
|
{
|
|
local rc=$1
|
|
local expected=$2
|
|
local msg="$3"
|
|
|
|
[ "${VERBOSE}" = "1" ] && echo
|
|
|
|
if [ ${rc} -eq ${expected} ]; then
|
|
nsuccess=$((nsuccess+1))
|
|
printf "TEST: %-70s [ OK ]\n" "${msg}"
|
|
else
|
|
nfail=$((nfail+1))
|
|
printf "TEST: %-70s [FAIL]\n" "${msg}"
|
|
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
|
|
echo
|
|
echo "hit enter to continue, 'q' to quit"
|
|
read a
|
|
[ "$a" = "q" ] && exit 1
|
|
fi
|
|
fi
|
|
|
|
if [ "${PAUSE}" = "yes" ]; then
|
|
echo
|
|
echo "hit enter to continue, 'q' to quit"
|
|
read a
|
|
[ "$a" = "q" ] && exit 1
|
|
fi
|
|
|
|
kill_procs
|
|
}
|
|
|
|
log_test_addr()
|
|
{
|
|
local addr=$1
|
|
local rc=$2
|
|
local expected=$3
|
|
local msg="$4"
|
|
local astr
|
|
|
|
astr=$(addr2str ${addr})
|
|
log_test $rc $expected "$msg - ${astr}"
|
|
}
|
|
|
|
log_section()
|
|
{
|
|
echo
|
|
echo "###########################################################################"
|
|
echo "$*"
|
|
echo "###########################################################################"
|
|
echo
|
|
}
|
|
|
|
log_subsection()
|
|
{
|
|
echo
|
|
echo "#################################################################"
|
|
echo "$*"
|
|
echo
|
|
}
|
|
|
|
log_start()
|
|
{
|
|
# make sure we have no test instances running
|
|
kill_procs
|
|
|
|
if [ "${VERBOSE}" = "1" ]; then
|
|
echo
|
|
echo "#######################################################"
|
|
fi
|
|
}
|
|
|
|
log_debug()
|
|
{
|
|
if [ "${VERBOSE}" = "1" ]; then
|
|
echo
|
|
echo "$*"
|
|
echo
|
|
fi
|
|
}
|
|
|
|
show_hint()
|
|
{
|
|
if [ "${VERBOSE}" = "1" ]; then
|
|
echo "HINT: $*"
|
|
echo
|
|
fi
|
|
}
|
|
|
|
kill_procs()
|
|
{
|
|
killall nettest ping ping6 >/dev/null 2>&1
|
|
sleep 1
|
|
}
|
|
|
|
do_run_cmd()
|
|
{
|
|
local cmd="$*"
|
|
local out
|
|
|
|
if [ "$VERBOSE" = "1" ]; then
|
|
echo "COMMAND: ${cmd}"
|
|
fi
|
|
|
|
out=$($cmd 2>&1)
|
|
rc=$?
|
|
if [ "$VERBOSE" = "1" -a -n "$out" ]; then
|
|
echo "$out"
|
|
fi
|
|
|
|
return $rc
|
|
}
|
|
|
|
run_cmd()
|
|
{
|
|
do_run_cmd ${NSA_CMD} $*
|
|
}
|
|
|
|
run_cmd_nsb()
|
|
{
|
|
do_run_cmd ${NSB_CMD} $*
|
|
}
|
|
|
|
run_cmd_nsc()
|
|
{
|
|
do_run_cmd ${NSC_CMD} $*
|
|
}
|
|
|
|
setup_cmd()
|
|
{
|
|
local cmd="$*"
|
|
local rc
|
|
|
|
run_cmd ${cmd}
|
|
rc=$?
|
|
if [ $rc -ne 0 ]; then
|
|
# show user the command if not done so already
|
|
if [ "$VERBOSE" = "0" ]; then
|
|
echo "setup command: $cmd"
|
|
fi
|
|
echo "failed. stopping tests"
|
|
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
|
|
echo
|
|
echo "hit enter to continue"
|
|
read a
|
|
fi
|
|
exit $rc
|
|
fi
|
|
}
|
|
|
|
setup_cmd_nsb()
|
|
{
|
|
local cmd="$*"
|
|
local rc
|
|
|
|
run_cmd_nsb ${cmd}
|
|
rc=$?
|
|
if [ $rc -ne 0 ]; then
|
|
# show user the command if not done so already
|
|
if [ "$VERBOSE" = "0" ]; then
|
|
echo "setup command: $cmd"
|
|
fi
|
|
echo "failed. stopping tests"
|
|
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
|
|
echo
|
|
echo "hit enter to continue"
|
|
read a
|
|
fi
|
|
exit $rc
|
|
fi
|
|
}
|
|
|
|
setup_cmd_nsc()
|
|
{
|
|
local cmd="$*"
|
|
local rc
|
|
|
|
run_cmd_nsc ${cmd}
|
|
rc=$?
|
|
if [ $rc -ne 0 ]; then
|
|
# show user the command if not done so already
|
|
if [ "$VERBOSE" = "0" ]; then
|
|
echo "setup command: $cmd"
|
|
fi
|
|
echo "failed. stopping tests"
|
|
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
|
|
echo
|
|
echo "hit enter to continue"
|
|
read a
|
|
fi
|
|
exit $rc
|
|
fi
|
|
}
|
|
|
|
# set sysctl values in NS-A
|
|
set_sysctl()
|
|
{
|
|
echo "SYSCTL: $*"
|
|
echo
|
|
run_cmd sysctl -q -w $*
|
|
}
|
|
|
|
# get sysctl values in NS-A
|
|
get_sysctl()
|
|
{
|
|
${NSA_CMD} sysctl -n $*
|
|
}
|
|
|
|
################################################################################
|
|
# Setup for tests
|
|
|
|
addr2str()
|
|
{
|
|
case "$1" in
|
|
127.0.0.1) echo "loopback";;
|
|
::1) echo "IPv6 loopback";;
|
|
|
|
${BCAST_IP}) echo "broadcast";;
|
|
${MCAST_IP}) echo "multicast";;
|
|
|
|
${NSA_IP}) echo "ns-A IP";;
|
|
${NSA_IP6}) echo "ns-A IPv6";;
|
|
${NSA_LO_IP}) echo "ns-A loopback IP";;
|
|
${NSA_LO_IP6}) echo "ns-A loopback IPv6";;
|
|
${NSA_LINKIP6}|${NSA_LINKIP6}%*) echo "ns-A IPv6 LLA";;
|
|
|
|
${NSB_IP}) echo "ns-B IP";;
|
|
${NSB_IP6}) echo "ns-B IPv6";;
|
|
${NSB_LO_IP}) echo "ns-B loopback IP";;
|
|
${NSB_LO_IP6}) echo "ns-B loopback IPv6";;
|
|
${NSB_LINKIP6}|${NSB_LINKIP6}%*) echo "ns-B IPv6 LLA";;
|
|
|
|
${NL_IP}) echo "nonlocal IP";;
|
|
${NL_IP6}) echo "nonlocal IPv6";;
|
|
|
|
${VRF_IP}) echo "VRF IP";;
|
|
${VRF_IP6}) echo "VRF IPv6";;
|
|
|
|
${MCAST}%*) echo "multicast IP";;
|
|
|
|
*) echo "unknown";;
|
|
esac
|
|
}
|
|
|
|
get_linklocal()
|
|
{
|
|
local ns=$1
|
|
local dev=$2
|
|
local addr
|
|
|
|
addr=$(ip -netns ${ns} -6 -br addr show dev ${dev} | \
|
|
awk '{
|
|
for (i = 3; i <= NF; ++i) {
|
|
if ($i ~ /^fe80/)
|
|
print $i
|
|
}
|
|
}'
|
|
)
|
|
addr=${addr/\/*}
|
|
|
|
[ -z "$addr" ] && return 1
|
|
|
|
echo $addr
|
|
|
|
return 0
|
|
}
|
|
|
|
################################################################################
|
|
# create namespaces and vrf
|
|
|
|
create_vrf()
|
|
{
|
|
local ns=$1
|
|
local vrf=$2
|
|
local table=$3
|
|
local addr=$4
|
|
local addr6=$5
|
|
|
|
ip -netns ${ns} link add ${vrf} type vrf table ${table}
|
|
ip -netns ${ns} link set ${vrf} up
|
|
ip -netns ${ns} route add vrf ${vrf} unreachable default metric 8192
|
|
ip -netns ${ns} -6 route add vrf ${vrf} unreachable default metric 8192
|
|
|
|
ip -netns ${ns} addr add 127.0.0.1/8 dev ${vrf}
|
|
ip -netns ${ns} -6 addr add ::1 dev ${vrf} nodad
|
|
if [ "${addr}" != "-" ]; then
|
|
ip -netns ${ns} addr add dev ${vrf} ${addr}
|
|
fi
|
|
if [ "${addr6}" != "-" ]; then
|
|
ip -netns ${ns} -6 addr add dev ${vrf} ${addr6}
|
|
fi
|
|
|
|
ip -netns ${ns} ru del pref 0
|
|
ip -netns ${ns} ru add pref 32765 from all lookup local
|
|
ip -netns ${ns} -6 ru del pref 0
|
|
ip -netns ${ns} -6 ru add pref 32765 from all lookup local
|
|
}
|
|
|
|
create_ns()
|
|
{
|
|
local ns=$1
|
|
local addr=$2
|
|
local addr6=$3
|
|
|
|
if [ "${addr}" != "-" ]; then
|
|
ip -netns ${ns} addr add dev lo ${addr}
|
|
fi
|
|
if [ "${addr6}" != "-" ]; then
|
|
ip -netns ${ns} -6 addr add dev lo ${addr6}
|
|
fi
|
|
|
|
ip -netns ${ns} ro add unreachable default metric 8192
|
|
ip -netns ${ns} -6 ro add unreachable default metric 8192
|
|
|
|
ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
|
|
ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
|
|
ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
|
|
ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
|
|
}
|
|
|
|
# create veth pair to connect namespaces and apply addresses.
|
|
connect_ns()
|
|
{
|
|
local ns1=$1
|
|
local ns1_dev=$2
|
|
local ns1_addr=$3
|
|
local ns1_addr6=$4
|
|
local ns2=$5
|
|
local ns2_dev=$6
|
|
local ns2_addr=$7
|
|
local ns2_addr6=$8
|
|
|
|
ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
|
|
ip -netns ${ns1} li set ${ns1_dev} up
|
|
ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
|
|
ip -netns ${ns2} li set ${ns2_dev} up
|
|
|
|
if [ "${ns1_addr}" != "-" ]; then
|
|
ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
|
|
ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
|
|
fi
|
|
|
|
if [ "${ns1_addr6}" != "-" ]; then
|
|
ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
|
|
ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
|
|
fi
|
|
}
|
|
|
|
cleanup()
|
|
{
|
|
# explicit cleanups to check those code paths
|
|
ip netns | grep -q ${NSA}
|
|
if [ $? -eq 0 ]; then
|
|
ip -netns ${NSA} link delete ${VRF}
|
|
ip -netns ${NSA} ro flush table ${VRF_TABLE}
|
|
|
|
ip -netns ${NSA} addr flush dev ${NSA_DEV}
|
|
ip -netns ${NSA} -6 addr flush dev ${NSA_DEV}
|
|
ip -netns ${NSA} link set dev ${NSA_DEV} down
|
|
ip -netns ${NSA} link del dev ${NSA_DEV}
|
|
|
|
ip netns pids ${NSA} | xargs kill 2>/dev/null
|
|
cleanup_ns ${NSA}
|
|
fi
|
|
|
|
ip netns pids ${NSB} | xargs kill 2>/dev/null
|
|
ip netns pids ${NSC} | xargs kill 2>/dev/null
|
|
cleanup_ns ${NSB} ${NSC}
|
|
}
|
|
|
|
cleanup_vrf_dup()
|
|
{
|
|
ip link del ${NSA_DEV2} >/dev/null 2>&1
|
|
ip netns pids ${NSC} | xargs kill 2>/dev/null
|
|
ip netns del ${NSC} >/dev/null 2>&1
|
|
}
|
|
|
|
setup_vrf_dup()
|
|
{
|
|
# some VRF tests use ns-C which has the same config as
|
|
# ns-B but for a device NOT in the VRF
|
|
setup_ns NSC
|
|
NSC_CMD="ip netns exec ${NSC}"
|
|
create_ns ${NSC} "-" "-"
|
|
connect_ns ${NSA} ${NSA_DEV2} ${NSA_IP}/24 ${NSA_IP6}/64 \
|
|
${NSC} ${NSC_DEV} ${NSB_IP}/24 ${NSB_IP6}/64
|
|
}
|
|
|
|
setup()
|
|
{
|
|
local with_vrf=${1}
|
|
|
|
# make sure we are starting with a clean slate
|
|
kill_procs
|
|
cleanup 2>/dev/null
|
|
|
|
log_debug "Configuring network namespaces"
|
|
set -e
|
|
|
|
setup_ns NSA NSB
|
|
NSA_CMD="ip netns exec ${NSA}"
|
|
NSB_CMD="ip netns exec ${NSB}"
|
|
|
|
create_ns ${NSA} ${NSA_LO_IP}/32 ${NSA_LO_IP6}/128
|
|
create_ns ${NSB} ${NSB_LO_IP}/32 ${NSB_LO_IP6}/128
|
|
connect_ns ${NSA} ${NSA_DEV} ${NSA_IP}/24 ${NSA_IP6}/64 \
|
|
${NSB} ${NSB_DEV} ${NSB_IP}/24 ${NSB_IP6}/64
|
|
|
|
NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV})
|
|
NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV})
|
|
|
|
# tell ns-A how to get to remote addresses of ns-B
|
|
if [ "${with_vrf}" = "yes" ]; then
|
|
create_vrf ${NSA} ${VRF} ${VRF_TABLE} ${VRF_IP} ${VRF_IP6}
|
|
|
|
ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF}
|
|
ip -netns ${NSA} ro add vrf ${VRF} ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV}
|
|
ip -netns ${NSA} -6 ro add vrf ${VRF} ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV}
|
|
|
|
ip -netns ${NSB} ro add ${VRF_IP}/32 via ${NSA_IP} dev ${NSB_DEV}
|
|
ip -netns ${NSB} -6 ro add ${VRF_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV}
|
|
else
|
|
ip -netns ${NSA} ro add ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV}
|
|
ip -netns ${NSA} ro add ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV}
|
|
fi
|
|
|
|
|
|
# tell ns-B how to get to remote addresses of ns-A
|
|
ip -netns ${NSB} ro add ${NSA_LO_IP}/32 via ${NSA_IP} dev ${NSB_DEV}
|
|
ip -netns ${NSB} ro add ${NSA_LO_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV}
|
|
|
|
set +e
|
|
|
|
sleep 1
|
|
}
|
|
|
|
setup_lla_only()
|
|
{
|
|
# make sure we are starting with a clean slate
|
|
kill_procs
|
|
cleanup 2>/dev/null
|
|
|
|
log_debug "Configuring network namespaces"
|
|
set -e
|
|
|
|
setup_ns NSA NSB NSC
|
|
NSA_CMD="ip netns exec ${NSA}"
|
|
NSB_CMD="ip netns exec ${NSB}"
|
|
NSC_CMD="ip netns exec ${NSC}"
|
|
create_ns ${NSA} "-" "-"
|
|
create_ns ${NSB} "-" "-"
|
|
create_ns ${NSC} "-" "-"
|
|
connect_ns ${NSA} ${NSA_DEV} "-" "-" \
|
|
${NSB} ${NSB_DEV} "-" "-"
|
|
connect_ns ${NSA} ${NSA_DEV2} "-" "-" \
|
|
${NSC} ${NSC_DEV} "-" "-"
|
|
|
|
NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV})
|
|
NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV})
|
|
NSC_LINKIP6=$(get_linklocal ${NSC} ${NSC_DEV})
|
|
|
|
create_vrf ${NSA} ${VRF} ${VRF_TABLE} "-" "-"
|
|
ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF}
|
|
ip -netns ${NSA} link set dev ${NSA_DEV2} vrf ${VRF}
|
|
|
|
set +e
|
|
|
|
sleep 1
|
|
}
|
|
|
|
################################################################################
|
|
# IPv4
|
|
|
|
ipv4_ping_novrf()
|
|
{
|
|
local a
|
|
|
|
#
|
|
# out
|
|
#
|
|
for a in ${NSB_IP} ${NSB_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping out"
|
|
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, device bind"
|
|
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_LO_IP} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, address bind"
|
|
done
|
|
|
|
#
|
|
# out, but don't use gateway if peer is not on link
|
|
#
|
|
a=${NSB_IP}
|
|
log_start
|
|
run_cmd ping -c 1 -w 1 -r ${a}
|
|
log_test_addr ${a} $? 0 "ping out (don't route), peer on link"
|
|
|
|
a=${NSB_LO_IP}
|
|
log_start
|
|
show_hint "Fails since peer is not on link"
|
|
run_cmd ping -c 1 -w 1 -r ${a}
|
|
log_test_addr ${a} $? 1 "ping out (don't route), peer not on link"
|
|
|
|
#
|
|
# in
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping in"
|
|
done
|
|
|
|
#
|
|
# local traffic
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping local"
|
|
done
|
|
|
|
#
|
|
# local traffic, socket bound to device
|
|
#
|
|
# address on device
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, device bind"
|
|
|
|
# loopback addresses not reachable from device bind
|
|
# fails in a really weird way though because ipv4 special cases
|
|
# route lookups with oif set.
|
|
for a in ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Fails since address on loopback device is out of device scope"
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 1 "ping local, device bind"
|
|
done
|
|
|
|
#
|
|
# ip rule blocks reachability to remote address
|
|
#
|
|
log_start
|
|
setup_cmd ip rule add pref 32765 from all lookup local
|
|
setup_cmd ip rule del pref 0 from all lookup local
|
|
setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit
|
|
setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit
|
|
|
|
a=${NSB_LO_IP}
|
|
run_cmd ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, blocked by rule"
|
|
|
|
# NOTE: ipv4 actually allows the lookup to fail and yet still create
|
|
# a viable rtable if the oif (e.g., bind to device) is set, so this
|
|
# case succeeds despite the rule
|
|
# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Response generates ICMP (or arp request is ignored) due to ip rule"
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by rule"
|
|
|
|
[ "$VERBOSE" = "1" ] && echo
|
|
setup_cmd ip rule del pref 32765 from all lookup local
|
|
setup_cmd ip rule add pref 0 from all lookup local
|
|
setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit
|
|
setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit
|
|
|
|
#
|
|
# route blocks reachability to remote address
|
|
#
|
|
log_start
|
|
setup_cmd ip route replace unreachable ${NSB_LO_IP}
|
|
setup_cmd ip route replace unreachable ${NSB_IP}
|
|
|
|
a=${NSB_LO_IP}
|
|
run_cmd ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, blocked by route"
|
|
|
|
# NOTE: ipv4 actually allows the lookup to fail and yet still create
|
|
# a viable rtable if the oif (e.g., bind to device) is set, so this
|
|
# case succeeds despite not having a route for the address
|
|
# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Response is dropped (or arp request is ignored) due to ip route"
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by route"
|
|
|
|
#
|
|
# remove 'remote' routes; fallback to default
|
|
#
|
|
log_start
|
|
setup_cmd ip ro del ${NSB_LO_IP}
|
|
|
|
a=${NSB_LO_IP}
|
|
run_cmd ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, unreachable default route"
|
|
|
|
# NOTE: ipv4 actually allows the lookup to fail and yet still create
|
|
# a viable rtable if the oif (e.g., bind to device) is set, so this
|
|
# case succeeds despite not having a route for the address
|
|
# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
}
|
|
|
|
ipv4_ping_vrf()
|
|
{
|
|
local a
|
|
|
|
# should default on; does not exist on older kernels
|
|
set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
|
|
|
|
#
|
|
# out
|
|
#
|
|
for a in ${NSB_IP} ${NSB_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, VRF bind"
|
|
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, device bind"
|
|
|
|
log_start
|
|
run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${NSA_IP} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, vrf device + dev address bind"
|
|
|
|
log_start
|
|
run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${VRF_IP} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, vrf device + vrf address bind"
|
|
done
|
|
|
|
#
|
|
# in
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping in"
|
|
done
|
|
|
|
#
|
|
# local traffic, local address
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Source address should be ${a}"
|
|
run_cmd ping -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, VRF bind"
|
|
done
|
|
|
|
#
|
|
# local traffic, socket bound to device
|
|
#
|
|
# address on device
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, device bind"
|
|
|
|
# vrf device is out of scope
|
|
for a in ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Fails since address on vrf device is out of device scope"
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping local, device bind"
|
|
done
|
|
|
|
#
|
|
# ip rule blocks address
|
|
#
|
|
log_start
|
|
setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit
|
|
setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit
|
|
|
|
a=${NSB_LO_IP}
|
|
run_cmd ping -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, vrf bind, blocked by rule"
|
|
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Response lost due to ip rule"
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by rule"
|
|
|
|
[ "$VERBOSE" = "1" ] && echo
|
|
setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit
|
|
setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit
|
|
|
|
#
|
|
# remove 'remote' routes; fallback to default
|
|
#
|
|
log_start
|
|
setup_cmd ip ro del vrf ${VRF} ${NSB_LO_IP}
|
|
|
|
a=${NSB_LO_IP}
|
|
run_cmd ping -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, vrf bind, unreachable route"
|
|
|
|
log_start
|
|
run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Response lost by unreachable route"
|
|
run_cmd_nsb ping -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, unreachable route"
|
|
}
|
|
|
|
ipv4_ping()
|
|
{
|
|
log_section "IPv4 ping"
|
|
|
|
log_subsection "No VRF"
|
|
setup
|
|
set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null
|
|
ipv4_ping_novrf
|
|
setup
|
|
set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
|
|
ipv4_ping_novrf
|
|
setup
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv4_ping_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv4_ping_vrf
|
|
setup "yes"
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv4_ping_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv4 TCP
|
|
|
|
#
|
|
# MD5 tests without VRF
|
|
#
|
|
ipv4_tcp_md5_novrf()
|
|
{
|
|
#
|
|
# single address
|
|
#
|
|
|
|
# basic use case
|
|
log_start
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: Single address config"
|
|
|
|
# client sends MD5, server not configured
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Server no config, client uses password"
|
|
|
|
# wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: Client uses wrong password"
|
|
|
|
# client from different address
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Client address does not match address configured with password"
|
|
|
|
#
|
|
# MD5 extension - prefix length
|
|
#
|
|
|
|
# client in prefix
|
|
log_start
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: Prefix config"
|
|
|
|
# client in prefix, wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: Prefix config, client uses wrong password"
|
|
|
|
# client outside of prefix
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
|
|
}
|
|
|
|
#
|
|
# MD5 tests with VRF
|
|
#
|
|
ipv4_tcp_md5()
|
|
{
|
|
#
|
|
# single address
|
|
#
|
|
|
|
# basic use case
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config"
|
|
|
|
# client sends MD5, server not configured
|
|
log_start
|
|
show_hint "Should timeout since server does not have MD5 auth"
|
|
run_cmd nettest -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Server no config, client uses password"
|
|
|
|
# wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Client uses wrong password"
|
|
|
|
# client from different address
|
|
log_start
|
|
show_hint "Should timeout since server config differs from client"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
|
|
|
|
#
|
|
# MD5 extension - prefix length
|
|
#
|
|
|
|
# client in prefix
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config"
|
|
|
|
# client in prefix, wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
|
|
|
|
# client outside of prefix
|
|
log_start
|
|
show_hint "Should timeout since client address is outside of prefix"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
|
|
|
|
#
|
|
# duplicate config between default VRF and a VRF
|
|
#
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in default VRF uses VRF password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in VRF uses default VRF password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in default VRF uses VRF password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in VRF uses default VRF password"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
|
|
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
|
|
|
|
#
|
|
# negative tests
|
|
#
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
|
|
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
|
|
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
|
|
|
|
test_ipv4_md5_vrf__vrf_server__no_bind_ifindex
|
|
test_ipv4_md5_vrf__global_server__bind_ifindex0
|
|
}
|
|
|
|
test_ipv4_md5_vrf__vrf_server__no_bind_ifindex()
|
|
{
|
|
log_start
|
|
show_hint "Simulates applications using VRF without TCP_MD5SIG_FLAG_IFINDEX"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: VRF-bound server, unbound key accepts connection"
|
|
|
|
log_start
|
|
show_hint "Binding both the socket and the key is not required but it works"
|
|
run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: VRF-bound server, bound key accepts connection"
|
|
}
|
|
|
|
test_ipv4_md5_vrf__global_server__bind_ifindex0()
|
|
{
|
|
# This particular test needs tcp_l3mdev_accept=1 for Global server to accept VRF connections
|
|
local old_tcp_l3mdev_accept
|
|
old_tcp_l3mdev_accept=$(get_sysctl net.ipv4.tcp_l3mdev_accept)
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=1
|
|
|
|
log_start
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Global server, Key bound to ifindex=0 rejects VRF connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection"
|
|
log_start
|
|
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts VRF connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex &
|
|
sleep 1
|
|
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts non-VRF connection"
|
|
|
|
# restore value
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept="$old_tcp_l3mdev_accept"
|
|
}
|
|
|
|
ipv4_tcp_dontroute()
|
|
{
|
|
local syncookies=$1
|
|
local nsa_syncookies
|
|
local nsb_syncookies
|
|
local a
|
|
|
|
#
|
|
# Link local connection tests (SO_DONTROUTE).
|
|
# Connections should succeed only when the remote IP address is
|
|
# on link (doesn't need to be routed through a gateway).
|
|
#
|
|
|
|
nsa_syncookies=$(ip netns exec "${NSA}" sysctl -n net.ipv4.tcp_syncookies)
|
|
nsb_syncookies=$(ip netns exec "${NSB}" sysctl -n net.ipv4.tcp_syncookies)
|
|
ip netns exec "${NSA}" sysctl -wq net.ipv4.tcp_syncookies=${syncookies}
|
|
ip netns exec "${NSB}" sysctl -wq net.ipv4.tcp_syncookies=${syncookies}
|
|
|
|
# Test with eth1 address (on link).
|
|
|
|
a=${NSB_IP}
|
|
log_start
|
|
do_run_cmd nettest -B -N "${NSA}" -O "${NSB}" -r ${a} --client-dontroute
|
|
log_test_addr ${a} $? 0 "SO_DONTROUTE client, syncookies=${syncookies}"
|
|
|
|
a=${NSB_IP}
|
|
log_start
|
|
do_run_cmd nettest -B -N "${NSA}" -O "${NSB}" -r ${a} --server-dontroute
|
|
log_test_addr ${a} $? 0 "SO_DONTROUTE server, syncookies=${syncookies}"
|
|
|
|
# Test with loopback address (routed).
|
|
#
|
|
# The client would use the eth1 address as source IP by default.
|
|
# Therefore, we need to use the -c option here, to force the use of the
|
|
# routed (loopback) address as source IP (so that the server will try
|
|
# to respond to a routed address and not a link local one).
|
|
|
|
a=${NSB_LO_IP}
|
|
log_start
|
|
show_hint "Should fail 'Network is unreachable' since server is not on link"
|
|
do_run_cmd nettest -B -N "${NSA}" -O "${NSB}" -c "${NSA_LO_IP}" -r ${a} --client-dontroute
|
|
log_test_addr ${a} $? 1 "SO_DONTROUTE client, syncookies=${syncookies}"
|
|
|
|
a=${NSB_LO_IP}
|
|
log_start
|
|
show_hint "Should timeout since server cannot respond (client is not on link)"
|
|
do_run_cmd nettest -B -N "${NSA}" -O "${NSB}" -c "${NSA_LO_IP}" -r ${a} --server-dontroute
|
|
log_test_addr ${a} $? 2 "SO_DONTROUTE server, syncookies=${syncookies}"
|
|
|
|
ip netns exec "${NSB}" sysctl -wq net.ipv4.tcp_syncookies=${nsb_syncookies}
|
|
ip netns exec "${NSA}" sysctl -wq net.ipv4.tcp_syncookies=${nsa_syncookies}
|
|
}
|
|
|
|
ipv4_tcp_novrf()
|
|
{
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
|
|
# verify TCP reset sent and received
|
|
for a in ${NSA_IP} ${NSA_LO_IP}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP} ${NSB_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -0 ${NSA_IP}
|
|
log_test_addr ${a} $? 0 "Client"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, unbound client"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -0 ${a} -1 ${a}
|
|
log_test_addr ${a} $? 0 "Global server, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
|
|
|
|
for a in ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -s -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 0 "Global server, device client, local connection"
|
|
|
|
for a in ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "Global server, device client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, device client, local conn"
|
|
|
|
[ "$fips_enabled" = "1" ] || ipv4_tcp_md5_novrf
|
|
|
|
ipv4_tcp_dontroute 0
|
|
ipv4_tcp_dontroute 2
|
|
}
|
|
|
|
ipv4_tcp_vrf()
|
|
{
|
|
local a
|
|
|
|
# disable global server
|
|
log_subsection "Global server disabled"
|
|
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=0
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
|
|
# verify TCP reset received
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
# local address tests
|
|
# (${VRF_IP} and 127.0.0.1 both timeout)
|
|
a=${NSA_IP}
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "Global server, local connection"
|
|
|
|
# run MD5 tests
|
|
if [ "$fips_enabled" = "0" ]; then
|
|
setup_vrf_dup
|
|
ipv4_tcp_md5
|
|
cleanup_vrf_dup
|
|
fi
|
|
|
|
#
|
|
# enable VRF global server
|
|
#
|
|
log_subsection "VRF Global server enabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=1
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
show_hint "client socket should be bound to VRF"
|
|
run_cmd nettest -s -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
log_start
|
|
show_hint "client socket should be bound to VRF"
|
|
run_cmd nettest -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
# verify TCP reset received
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
show_hint "client socket should be bound to device"
|
|
run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
|
|
# local address tests
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since client is not bound to VRF"
|
|
run_cmd nettest -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, local connection"
|
|
done
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP} ${NSB_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${VRF}
|
|
log_test_addr ${a} $? 0 "Client, VRF bind"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -s &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -r ${a} -d ${VRF}
|
|
log_test_addr ${a} $? 1 "No server, VRF client"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since client is out of VRF scope"
|
|
run_cmd nettest -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local connection"
|
|
}
|
|
|
|
ipv4_tcp()
|
|
{
|
|
log_section "IPv4/TCP"
|
|
log_subsection "No VRF"
|
|
setup
|
|
|
|
# tcp_l3mdev_accept should have no affect without VRF;
|
|
# run tests with it enabled and disabled to verify
|
|
log_subsection "tcp_l3mdev_accept disabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=0
|
|
ipv4_tcp_novrf
|
|
log_subsection "tcp_l3mdev_accept enabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=1
|
|
ipv4_tcp_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv4_tcp_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv4 UDP
|
|
|
|
ipv4_udp_novrf()
|
|
{
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP} ${NSB_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -0 ${NSA_IP}
|
|
log_test_addr ${a} $? 0 "Client"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP}
|
|
log_test_addr ${a} $? 0 "Client, device send via cmsg"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP}
|
|
log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} -U
|
|
log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF, with connect()"
|
|
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, unbound client"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -0 ${a} -1 ${a}
|
|
log_test_addr ${a} $? 0 "Global server, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
|
|
|
|
for a in ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since address is out of device scope"
|
|
run_cmd nettest -s -D -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -D &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -C -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -S -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} -U
|
|
log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection, with connect()"
|
|
|
|
|
|
# IPv4 with device bind has really weird behavior - it overrides the
|
|
# fib lookup, generates an rtable and tries to send the packet. This
|
|
# causes failures for local traffic at different places
|
|
for a in ${NSA_LO_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Should fail since addresses on loopback are out of device scope"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 2 "Global server, device client, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail since addresses on loopback are out of device scope"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C
|
|
log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail since addresses on loopback are out of device scope"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S
|
|
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail since addresses on loopback are out of device scope"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -U
|
|
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()"
|
|
|
|
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 2 "No server, device client, local conn"
|
|
|
|
#
|
|
# Link local connection tests (SO_DONTROUTE).
|
|
# Connections should succeed only when the remote IP address is
|
|
# on link (doesn't need to be routed through a gateway).
|
|
#
|
|
|
|
a=${NSB_IP}
|
|
log_start
|
|
do_run_cmd nettest -B -D -N "${NSA}" -O "${NSB}" -r ${a} --client-dontroute
|
|
log_test_addr ${a} $? 0 "SO_DONTROUTE client"
|
|
|
|
a=${NSB_LO_IP}
|
|
log_start
|
|
show_hint "Should fail 'Network is unreachable' since server is not on link"
|
|
do_run_cmd nettest -B -D -N "${NSA}" -O "${NSB}" -r ${a} --client-dontroute
|
|
log_test_addr ${a} $? 1 "SO_DONTROUTE client"
|
|
}
|
|
|
|
ipv4_udp_vrf()
|
|
{
|
|
local a
|
|
|
|
# disable global server
|
|
log_subsection "Global server disabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=0
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
show_hint "Fails because ingress is in a VRF and global server is disabled"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server"
|
|
|
|
log_start
|
|
run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
log_start
|
|
run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server is out of scope"
|
|
run_cmd nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, VRF client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
|
|
|
|
# enable global server
|
|
log_subsection "Global server enabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=1
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
log_start
|
|
run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
log_start
|
|
run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd_nsb nettest -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# client tests
|
|
#
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP}
|
|
log_test $? 0 "VRF client"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -D -s &
|
|
sleep 1
|
|
run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP}
|
|
log_test $? 0 "Enslaved device client"
|
|
|
|
# negative test - should fail
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -D -d ${VRF} -r ${NSB_IP}
|
|
log_test $? 1 "No server, VRF client"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${NSB_IP}
|
|
log_test $? 1 "No server, enslaved device client"
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
|
|
|
|
for a in ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd nettest -D -s -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
|
|
done
|
|
|
|
for a in ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
run_cmd nettest -s -D -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
done
|
|
|
|
# negative test - should fail
|
|
# verifies ECONNREFUSED
|
|
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, VRF client, local conn"
|
|
done
|
|
}
|
|
|
|
ipv4_udp()
|
|
{
|
|
log_section "IPv4/UDP"
|
|
log_subsection "No VRF"
|
|
|
|
setup
|
|
|
|
# udp_l3mdev_accept should have no affect without VRF;
|
|
# run tests with it enabled and disabled to verify
|
|
log_subsection "udp_l3mdev_accept disabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=0
|
|
ipv4_udp_novrf
|
|
log_subsection "udp_l3mdev_accept enabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=1
|
|
ipv4_udp_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv4_udp_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv4 address bind
|
|
#
|
|
# verifies ability or inability to bind to an address / device
|
|
|
|
ipv4_addr_bind_novrf()
|
|
{
|
|
#
|
|
# raw socket
|
|
#
|
|
for a in ${NSA_IP} ${NSA_LO_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -s -R -P icmp -l ${a} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
|
|
done
|
|
|
|
#
|
|
# tests for nonlocal bind
|
|
#
|
|
a=${NL_IP}
|
|
log_start
|
|
run_cmd nettest -s -R -f -l ${a} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -f -l ${a} -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -f -l ${a} -b
|
|
log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address"
|
|
|
|
#
|
|
# check that ICMP sockets cannot bind to broadcast and multicast addresses
|
|
#
|
|
a=${BCAST_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -l ${a} -b
|
|
log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address"
|
|
|
|
a=${MCAST_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -l ${a} -b
|
|
log_test_addr ${a} $? 1 "ICMP socket bind to multicast address"
|
|
|
|
#
|
|
# tcp sockets
|
|
#
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest -c ${a} -r ${NSB_IP} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -c ${a} -r ${NSB_IP} -d ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
|
|
|
|
# Sadly, the kernel allows binding a socket to a device and then
|
|
# binding to an address not on the device. The only restriction
|
|
# is that the address is valid in the L3 domain. So this test
|
|
# passes when it really should not
|
|
#a=${NSA_LO_IP}
|
|
#log_start
|
|
#show_hint "Should fail with 'Cannot assign requested address'"
|
|
#run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
#log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
|
|
}
|
|
|
|
ipv4_addr_bind_vrf()
|
|
{
|
|
#
|
|
# raw socket
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
show_hint "Socket not bound to VRF, but address is in VRF"
|
|
run_cmd nettest -s -R -P icmp -l ${a} -b
|
|
log_test_addr ${a} $? 1 "Raw socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
|
|
log_start
|
|
run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind"
|
|
done
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Address on loopback is out of VRF scope"
|
|
run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind"
|
|
|
|
#
|
|
# tests for nonlocal bind
|
|
#
|
|
a=${NL_IP}
|
|
log_start
|
|
run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind"
|
|
|
|
log_start
|
|
run_cmd nettest -s -f -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind"
|
|
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind"
|
|
|
|
#
|
|
# check that ICMP sockets cannot bind to broadcast and multicast addresses
|
|
#
|
|
a=${BCAST_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind"
|
|
|
|
a=${MCAST_IP}
|
|
log_start
|
|
run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind"
|
|
|
|
#
|
|
# tcp sockets
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
|
|
done
|
|
|
|
a=${NSA_LO_IP}
|
|
log_start
|
|
show_hint "Address on loopback out of scope for VRF"
|
|
run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
|
|
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
|
|
|
|
log_start
|
|
show_hint "Address on loopback out of scope for device in VRF"
|
|
run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
|
|
}
|
|
|
|
ipv4_addr_bind()
|
|
{
|
|
log_section "IPv4 address binds"
|
|
|
|
log_subsection "No VRF"
|
|
setup
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv4_addr_bind_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv4_addr_bind_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv4 runtime tests
|
|
|
|
ipv4_rt()
|
|
{
|
|
local desc="$1"
|
|
local varg="$2"
|
|
local with_vrf="yes"
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
run_cmd nettest ${varg} -s -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, enslaved device server"
|
|
|
|
setup ${with_vrf}
|
|
|
|
#
|
|
# client test
|
|
#
|
|
log_start
|
|
run_cmd_nsb nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd_nsb nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, enslaved device client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server, VRF client, local"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server and client, local"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
a=${NSA_IP}
|
|
log_start
|
|
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server, enslaved device client, local"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server, enslaved device client, local"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${NSA_DEV} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, enslaved device server and client, local"
|
|
}
|
|
|
|
ipv4_ping_rt()
|
|
{
|
|
local with_vrf="yes"
|
|
local a
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ping -f ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "Device delete with active traffic - ping in"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
a=${NSB_IP}
|
|
log_start
|
|
run_cmd ping -f -I ${VRF} ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "Device delete with active traffic - ping out"
|
|
}
|
|
|
|
ipv4_runtime()
|
|
{
|
|
log_section "Run time tests - ipv4"
|
|
|
|
setup "yes"
|
|
ipv4_ping_rt
|
|
|
|
setup "yes"
|
|
ipv4_rt "TCP active socket" "-n -1"
|
|
|
|
setup "yes"
|
|
ipv4_rt "TCP passive socket" "-i"
|
|
}
|
|
|
|
################################################################################
|
|
# IPv6
|
|
|
|
ipv6_ping_novrf()
|
|
{
|
|
local a
|
|
|
|
# should not have an impact, but make a known state
|
|
set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null
|
|
|
|
#
|
|
# out
|
|
#
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping out"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, device bind"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_LO_IP6} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, loopback address bind"
|
|
done
|
|
|
|
#
|
|
# in
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping in"
|
|
done
|
|
|
|
#
|
|
# local traffic, local address
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ::1 ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping local, no bind"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, device bind"
|
|
done
|
|
|
|
for a in ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Fails since address on loopback is out of device scope"
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping local, device bind"
|
|
done
|
|
|
|
#
|
|
# ip rule blocks address
|
|
#
|
|
log_start
|
|
setup_cmd ip -6 rule add pref 32765 from all lookup local
|
|
setup_cmd ip -6 rule del pref 0 from all lookup local
|
|
setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit
|
|
setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit
|
|
|
|
a=${NSB_LO_IP6}
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, blocked by rule"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Response lost due to ip rule"
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by rule"
|
|
|
|
setup_cmd ip -6 rule add pref 0 from all lookup local
|
|
setup_cmd ip -6 rule del pref 32765 from all lookup local
|
|
setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit
|
|
setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit
|
|
|
|
#
|
|
# route blocks reachability to remote address
|
|
#
|
|
log_start
|
|
setup_cmd ip -6 route del ${NSB_LO_IP6}
|
|
setup_cmd ip -6 route add unreachable ${NSB_LO_IP6} metric 10
|
|
setup_cmd ip -6 route add unreachable ${NSB_IP6} metric 10
|
|
|
|
a=${NSB_LO_IP6}
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, blocked by route"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, blocked by route"
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Response lost due to ip route"
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by route"
|
|
|
|
|
|
#
|
|
# remove 'remote' routes; fallback to default
|
|
#
|
|
log_start
|
|
setup_cmd ip -6 ro del unreachable ${NSB_LO_IP6}
|
|
setup_cmd ip -6 ro del unreachable ${NSB_IP6}
|
|
|
|
a=${NSB_LO_IP6}
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, unreachable route"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
|
|
}
|
|
|
|
ipv6_ping_vrf()
|
|
{
|
|
local a
|
|
|
|
# should default on; does not exist on older kernels
|
|
set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
|
|
|
|
#
|
|
# out
|
|
#
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, VRF bind"
|
|
done
|
|
|
|
for a in ${NSB_LINKIP6}%${VRF} ${MCAST}%${VRF}
|
|
do
|
|
log_start
|
|
show_hint "Fails since VRF device does not support linklocal or multicast"
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping out, VRF bind"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, device bind"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ip vrf exec ${VRF} ${ping6} -c1 -w1 -I ${VRF_IP6} ${a}
|
|
log_test_addr ${a} $? 0 "ping out, vrf device+address bind"
|
|
done
|
|
|
|
#
|
|
# in
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 0 "ping in"
|
|
done
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Fails since loopback address is out of VRF scope"
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in"
|
|
|
|
#
|
|
# local traffic, local address
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Source address should be ${a}"
|
|
run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, VRF bind"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 0 "ping local, device bind"
|
|
done
|
|
|
|
# LLA to GUA - remove ipv6 global addresses from ns-B
|
|
setup_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
|
|
setup_cmd_nsb ip -6 addr del ${NSB_LO_IP6}/128 dev lo
|
|
setup_cmd_nsb ip -6 ro add ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV}
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
|
|
log_test_addr ${a} $? 0 "ping in, LLA to GUA"
|
|
done
|
|
|
|
setup_cmd_nsb ip -6 ro del ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV}
|
|
setup_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV}
|
|
setup_cmd_nsb ip -6 addr add ${NSB_LO_IP6}/128 dev lo
|
|
|
|
#
|
|
# ip rule blocks address
|
|
#
|
|
log_start
|
|
setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit
|
|
setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit
|
|
|
|
a=${NSB_LO_IP6}
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, blocked by rule"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Response lost due to ip rule"
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 1 "ping in, blocked by rule"
|
|
|
|
log_start
|
|
setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit
|
|
setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit
|
|
|
|
#
|
|
# remove 'remote' routes; fallback to default
|
|
#
|
|
log_start
|
|
setup_cmd ip -6 ro del ${NSB_LO_IP6} vrf ${VRF}
|
|
|
|
a=${NSB_LO_IP6}
|
|
run_cmd ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping out, unreachable route"
|
|
|
|
log_start
|
|
run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
|
|
log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
|
|
|
|
ip -netns ${NSB} -6 ro del ${NSA_LO_IP6}
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${a}
|
|
log_test_addr ${a} $? 2 "ping in, unreachable route"
|
|
}
|
|
|
|
ipv6_ping()
|
|
{
|
|
log_section "IPv6 ping"
|
|
|
|
log_subsection "No VRF"
|
|
setup
|
|
ipv6_ping_novrf
|
|
setup
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv6_ping_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv6_ping_vrf
|
|
setup "yes"
|
|
set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
|
|
ipv6_ping_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv6 TCP
|
|
|
|
#
|
|
# MD5 tests without VRF
|
|
#
|
|
ipv6_tcp_md5_novrf()
|
|
{
|
|
#
|
|
# single address
|
|
#
|
|
|
|
# basic use case
|
|
log_start
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: Single address config"
|
|
|
|
# client sends MD5, server not configured
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Server no config, client uses password"
|
|
|
|
# wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: Client uses wrong password"
|
|
|
|
# client from different address
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Client address does not match address configured with password"
|
|
|
|
#
|
|
# MD5 extension - prefix length
|
|
#
|
|
|
|
# client in prefix
|
|
log_start
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: Prefix config"
|
|
|
|
# client in prefix, wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: Prefix config, client uses wrong password"
|
|
|
|
# client outside of prefix
|
|
log_start
|
|
show_hint "Should timeout due to MD5 mismatch"
|
|
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
|
|
}
|
|
|
|
#
|
|
# MD5 tests with VRF
|
|
#
|
|
ipv6_tcp_md5()
|
|
{
|
|
#
|
|
# single address
|
|
#
|
|
|
|
# basic use case
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config"
|
|
|
|
# client sends MD5, server not configured
|
|
log_start
|
|
show_hint "Should timeout since server does not have MD5 auth"
|
|
run_cmd nettest -6 -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Server no config, client uses password"
|
|
|
|
# wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Client uses wrong password"
|
|
|
|
# client from different address
|
|
log_start
|
|
show_hint "Should timeout since server config differs from client"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
|
|
|
|
#
|
|
# MD5 extension - prefix length
|
|
#
|
|
|
|
# client in prefix
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config"
|
|
|
|
# client in prefix, wrong password
|
|
log_start
|
|
show_hint "Should timeout since client uses wrong password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
|
|
|
|
# client outside of prefix
|
|
log_start
|
|
show_hint "Should timeout since client address is outside of prefix"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
|
|
|
|
#
|
|
# duplicate config between default VRF and a VRF
|
|
#
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in default VRF uses VRF password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in VRF uses default VRF password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in default VRF uses VRF password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
|
|
|
|
log_start
|
|
show_hint "Should timeout since client in VRF uses default VRF password"
|
|
run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
|
|
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
|
|
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
|
|
|
|
#
|
|
# negative tests
|
|
#
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
|
|
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
|
|
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
|
|
|
|
}
|
|
|
|
ipv6_tcp_novrf()
|
|
{
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
done
|
|
|
|
# verify TCP reset received
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Client"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, local connection"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
|
|
|
|
for a in ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client, local connection"
|
|
|
|
for a in ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "Global server, device client, local connection"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local conn"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, device client, local conn"
|
|
done
|
|
|
|
[ "$fips_enabled" = "1" ] || ipv6_tcp_md5_novrf
|
|
}
|
|
|
|
ipv6_tcp_vrf()
|
|
{
|
|
local a
|
|
|
|
# disable global server
|
|
log_subsection "Global server disabled"
|
|
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=0
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
done
|
|
|
|
# link local is always bound to ingress device
|
|
a=${NSA_LINKIP6}%${NSB_DEV}
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
done
|
|
|
|
# verify TCP reset received
|
|
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
# local address tests
|
|
a=${NSA_IP6}
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "Global server, local connection"
|
|
|
|
# run MD5 tests
|
|
if [ "$fips_enabled" = "0" ]; then
|
|
setup_vrf_dup
|
|
ipv6_tcp_md5
|
|
cleanup_vrf_dup
|
|
fi
|
|
|
|
#
|
|
# enable VRF global server
|
|
#
|
|
log_subsection "VRF Global server enabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=1
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
done
|
|
|
|
# For LLA, child socket is bound to device
|
|
a=${NSA_LINKIP6}%${NSB_DEV}
|
|
log_start
|
|
run_cmd nettest -6 -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
done
|
|
|
|
# verify TCP reset received
|
|
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
# local address tests
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
show_hint "Fails 'Connection refused' since client is not in VRF"
|
|
run_cmd nettest -6 -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, local connection"
|
|
done
|
|
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${VRF}
|
|
log_test_addr ${a} $? 0 "Client, VRF bind"
|
|
done
|
|
|
|
a=${NSB_LINKIP6}
|
|
log_start
|
|
show_hint "Fails since VRF device does not allow linklocal addresses"
|
|
run_cmd_nsb nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${VRF}
|
|
log_test_addr ${a} $? 1 "Client, VRF bind"
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -r ${a} -d ${VRF}
|
|
log_test_addr ${a} $? 1 "No server, VRF client"
|
|
done
|
|
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6} ::1
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
show_hint "Should fail since unbound client is out of VRF scope"
|
|
run_cmd nettest -6 -s -I ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
|
|
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local connection"
|
|
done
|
|
}
|
|
|
|
ipv6_tcp()
|
|
{
|
|
log_section "IPv6/TCP"
|
|
log_subsection "No VRF"
|
|
setup
|
|
|
|
# tcp_l3mdev_accept should have no affect without VRF;
|
|
# run tests with it enabled and disabled to verify
|
|
log_subsection "tcp_l3mdev_accept disabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=0
|
|
ipv6_tcp_novrf
|
|
log_subsection "tcp_l3mdev_accept enabled"
|
|
set_sysctl net.ipv4.tcp_l3mdev_accept=1
|
|
ipv6_tcp_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv6_tcp_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv6 UDP
|
|
|
|
ipv6_udp_novrf()
|
|
{
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server"
|
|
done
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
|
|
# should fail since loopback address is out of scope for a device
|
|
# bound server, but it does not - hence this is more documenting
|
|
# behavior.
|
|
#log_start
|
|
#show_hint "Should fail since loopback address is out of scope"
|
|
#run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
#sleep 1
|
|
#run_cmd_nsb nettest -6 -D -r ${a}
|
|
#log_test_addr ${a} $? 1 "Device server"
|
|
|
|
# negative test - should fail
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# client
|
|
#
|
|
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6}
|
|
log_test_addr ${a} $? 0 "Client"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6}
|
|
log_test_addr ${a} $? 0 "Client, device bind"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6}
|
|
log_test_addr ${a} $? 0 "Client, device send via cmsg"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6}
|
|
log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, unbound client"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "No server, device client"
|
|
done
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a}
|
|
log_test_addr ${a} $? 0 "Global server, local connection"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
|
|
|
|
for a in ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since address is out of device scope"
|
|
run_cmd nettest -6 -s -D -I ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "Device server, local connection"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -D &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -D &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -D &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection"
|
|
|
|
for a in ${NSA_LO_IP6} ::1
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV}
|
|
log_test_addr ${a} $? 1 "Global server, device client, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C
|
|
log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S
|
|
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
|
|
|
|
log_start
|
|
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -U
|
|
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local conn"
|
|
|
|
log_start
|
|
show_hint "Should fail 'Connection refused'"
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, device client, local conn"
|
|
|
|
# LLA to GUA
|
|
run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
|
|
run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
|
|
log_start
|
|
run_cmd nettest -6 -s -D &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
|
|
log_test $? 0 "UDP in - LLA to GUA"
|
|
|
|
run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
|
|
run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad
|
|
}
|
|
|
|
ipv6_udp_vrf()
|
|
{
|
|
local a
|
|
|
|
# disable global server
|
|
log_subsection "Global server disabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=0
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server is disabled"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server"
|
|
done
|
|
|
|
# negative test - should fail
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since there is no server"
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server is disabled"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, VRF client, local conn"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
show_hint "Should fail 'Connection refused' since global server is disabled"
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
|
|
|
|
# disable global server
|
|
log_subsection "Global server enabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=1
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server"
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 0 "Enslaved device server"
|
|
done
|
|
|
|
# negative test - should fail
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -r ${a}
|
|
log_test_addr ${a} $? 1 "No server"
|
|
done
|
|
|
|
#
|
|
# client tests
|
|
#
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
|
|
log_test $? 0 "VRF client"
|
|
|
|
# negative test - should fail
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
|
|
log_test $? 1 "No server, VRF client"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6}
|
|
log_test $? 0 "Enslaved device client"
|
|
|
|
# negative test - should fail
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6}
|
|
log_test $? 1 "No server, enslaved device client"
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
|
|
|
|
#log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
|
|
|
|
a=${VRF_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
|
|
|
|
# negative test - should fail
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, VRF client, local conn"
|
|
done
|
|
|
|
# device to global IP
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Global server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${VRF} -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 0 "Device server, device client, local conn"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
|
|
log_test_addr ${a} $? 1 "No server, device client, local conn"
|
|
|
|
|
|
# link local addresses
|
|
log_start
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
|
|
log_test $? 0 "Global server, linklocal IP"
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
|
|
log_test $? 1 "No server, linklocal IP"
|
|
|
|
|
|
log_start
|
|
run_cmd_nsb nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
|
|
log_test $? 0 "Enslaved device client, linklocal IP"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
|
|
log_test $? 1 "No server, device client, peer linklocal IP"
|
|
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -s &
|
|
sleep 1
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
|
|
log_test $? 0 "Enslaved device client, local conn - linklocal IP"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
|
|
log_test $? 1 "No server, device client, local conn - linklocal IP"
|
|
|
|
# LLA to GUA
|
|
run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
|
|
run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
|
|
log_start
|
|
run_cmd nettest -6 -s -D &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
|
|
log_test $? 0 "UDP in - LLA to GUA"
|
|
|
|
run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
|
|
run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad
|
|
}
|
|
|
|
ipv6_udp()
|
|
{
|
|
# should not matter, but set to known state
|
|
set_sysctl net.ipv4.udp_early_demux=1
|
|
|
|
log_section "IPv6/UDP"
|
|
log_subsection "No VRF"
|
|
setup
|
|
|
|
# udp_l3mdev_accept should have no affect without VRF;
|
|
# run tests with it enabled and disabled to verify
|
|
log_subsection "udp_l3mdev_accept disabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=0
|
|
ipv6_udp_novrf
|
|
log_subsection "udp_l3mdev_accept enabled"
|
|
set_sysctl net.ipv4.udp_l3mdev_accept=1
|
|
ipv6_udp_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv6_udp_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv6 address bind
|
|
|
|
ipv6_addr_bind_novrf()
|
|
{
|
|
#
|
|
# raw socket
|
|
#
|
|
for a in ${NSA_IP6} ${NSA_LO_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
|
|
done
|
|
|
|
#
|
|
# raw socket with nonlocal bind
|
|
#
|
|
a=${NL_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address"
|
|
|
|
#
|
|
# tcp sockets
|
|
#
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -l ${a} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
|
|
|
|
# Sadly, the kernel allows binding a socket to a device and then
|
|
# binding to an address not on the device. So this test passes
|
|
# when it really should not
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Tecnically should fail since address is not on device but kernel allows"
|
|
run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to out of scope local address"
|
|
}
|
|
|
|
ipv6_addr_bind_vrf()
|
|
{
|
|
#
|
|
# raw socket
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind"
|
|
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
|
|
done
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Address on loopback is out of VRF scope"
|
|
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind"
|
|
|
|
#
|
|
# raw socket with nonlocal bind
|
|
#
|
|
a=${NL_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -R -P icmp -f -l ${a} -I ${VRF} -b
|
|
log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind"
|
|
|
|
#
|
|
# tcp sockets
|
|
#
|
|
# address on enslaved device is valid for the VRF or device in a VRF
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind"
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
|
|
|
|
# Sadly, the kernel allows binding a socket to a device and then
|
|
# binding to an address not on the device. The only restriction
|
|
# is that the address is valid in the L3 domain. So this test
|
|
# passes when it really should not
|
|
a=${VRF_IP6}
|
|
log_start
|
|
show_hint "Tecnically should fail since address is not on device but kernel allows"
|
|
run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 0 "TCP socket bind to VRF address with device bind"
|
|
|
|
a=${NSA_LO_IP6}
|
|
log_start
|
|
show_hint "Address on loopback out of scope for VRF"
|
|
run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
|
|
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
|
|
|
|
log_start
|
|
show_hint "Address on loopback out of scope for device in VRF"
|
|
run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
|
|
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
|
|
|
|
}
|
|
|
|
ipv6_addr_bind()
|
|
{
|
|
log_section "IPv6 address binds"
|
|
|
|
log_subsection "No VRF"
|
|
setup
|
|
ipv6_addr_bind_novrf
|
|
|
|
log_subsection "With VRF"
|
|
setup "yes"
|
|
ipv6_addr_bind_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# IPv6 runtime tests
|
|
|
|
ipv6_rt()
|
|
{
|
|
local desc="$1"
|
|
local varg="-6 $2"
|
|
local with_vrf="yes"
|
|
local a
|
|
|
|
#
|
|
# server tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${NSA_DEV} -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${varg} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, enslaved device server"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
#
|
|
# client test
|
|
#
|
|
log_start
|
|
run_cmd_nsb nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test 0 0 "${desc}, VRF client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd_nsb nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test 0 0 "${desc}, enslaved device client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
|
|
#
|
|
# local address tests
|
|
#
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server, VRF client"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server and client"
|
|
|
|
setup ${with_vrf}
|
|
done
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd nettest ${varg} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, global server, device client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${VRF} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, VRF server, device client"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd nettest ${varg} -I ${NSA_DEV} -s &
|
|
sleep 1
|
|
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "${desc}, device server, device client"
|
|
}
|
|
|
|
ipv6_ping_rt()
|
|
{
|
|
local with_vrf="yes"
|
|
local a
|
|
|
|
a=${NSA_IP6}
|
|
log_start
|
|
run_cmd_nsb ${ping6} -f ${a} &
|
|
sleep 3
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "Device delete with active traffic - ping in"
|
|
|
|
setup ${with_vrf}
|
|
|
|
log_start
|
|
run_cmd ${ping6} -f ${NSB_IP6} -I ${VRF} &
|
|
sleep 1
|
|
run_cmd ip link del ${VRF}
|
|
sleep 1
|
|
log_test_addr ${a} 0 0 "Device delete with active traffic - ping out"
|
|
}
|
|
|
|
ipv6_runtime()
|
|
{
|
|
log_section "Run time tests - ipv6"
|
|
|
|
setup "yes"
|
|
ipv6_ping_rt
|
|
|
|
setup "yes"
|
|
ipv6_rt "TCP active socket" "-n -1"
|
|
|
|
setup "yes"
|
|
ipv6_rt "TCP passive socket" "-i"
|
|
|
|
setup "yes"
|
|
ipv6_rt "UDP active socket" "-D -n -1"
|
|
}
|
|
|
|
################################################################################
|
|
# netfilter blocking connections
|
|
|
|
netfilter_tcp_reset()
|
|
{
|
|
local a
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
|
|
done
|
|
}
|
|
|
|
netfilter_icmp()
|
|
{
|
|
local stype="$1"
|
|
local arg
|
|
local a
|
|
|
|
[ "${stype}" = "UDP" ] && arg="-D"
|
|
|
|
for a in ${NSA_IP} ${VRF_IP}
|
|
do
|
|
log_start
|
|
run_cmd nettest ${arg} -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest ${arg} -r ${a}
|
|
log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
|
|
done
|
|
}
|
|
|
|
ipv4_netfilter()
|
|
{
|
|
log_section "IPv4 Netfilter"
|
|
log_subsection "TCP reset"
|
|
|
|
setup "yes"
|
|
run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset
|
|
|
|
netfilter_tcp_reset
|
|
|
|
log_start
|
|
log_subsection "ICMP unreachable"
|
|
|
|
log_start
|
|
run_cmd iptables -F
|
|
run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp-port-unreachable
|
|
run_cmd iptables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp-port-unreachable
|
|
|
|
netfilter_icmp "TCP"
|
|
netfilter_icmp "UDP"
|
|
|
|
log_start
|
|
iptables -F
|
|
}
|
|
|
|
netfilter_tcp6_reset()
|
|
{
|
|
local a
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 -r ${a}
|
|
log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
|
|
done
|
|
}
|
|
|
|
netfilter_icmp6()
|
|
{
|
|
local stype="$1"
|
|
local arg
|
|
local a
|
|
|
|
[ "${stype}" = "UDP" ] && arg="$arg -D"
|
|
|
|
for a in ${NSA_IP6} ${VRF_IP6}
|
|
do
|
|
log_start
|
|
run_cmd nettest -6 -s ${arg} &
|
|
sleep 1
|
|
run_cmd_nsb nettest -6 ${arg} -r ${a}
|
|
log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
|
|
done
|
|
}
|
|
|
|
ipv6_netfilter()
|
|
{
|
|
log_section "IPv6 Netfilter"
|
|
log_subsection "TCP reset"
|
|
|
|
setup "yes"
|
|
run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset
|
|
|
|
netfilter_tcp6_reset
|
|
|
|
log_subsection "ICMP unreachable"
|
|
|
|
log_start
|
|
run_cmd ip6tables -F
|
|
run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable
|
|
run_cmd ip6tables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable
|
|
|
|
netfilter_icmp6 "TCP"
|
|
netfilter_icmp6 "UDP"
|
|
|
|
log_start
|
|
ip6tables -F
|
|
}
|
|
|
|
################################################################################
|
|
# specific use cases
|
|
|
|
# VRF only.
|
|
# ns-A device enslaved to bridge. Verify traffic with and without
|
|
# br_netfilter module loaded. Repeat with SVI on bridge.
|
|
use_case_br()
|
|
{
|
|
setup "yes"
|
|
|
|
setup_cmd ip link set ${NSA_DEV} down
|
|
setup_cmd ip addr del dev ${NSA_DEV} ${NSA_IP}/24
|
|
setup_cmd ip -6 addr del dev ${NSA_DEV} ${NSA_IP6}/64
|
|
|
|
setup_cmd ip link add br0 type bridge
|
|
setup_cmd ip addr add dev br0 ${NSA_IP}/24
|
|
setup_cmd ip -6 addr add dev br0 ${NSA_IP6}/64 nodad
|
|
|
|
setup_cmd ip li set ${NSA_DEV} master br0
|
|
setup_cmd ip li set ${NSA_DEV} up
|
|
setup_cmd ip li set br0 up
|
|
setup_cmd ip li set br0 vrf ${VRF}
|
|
|
|
rmmod br_netfilter 2>/dev/null
|
|
sleep 5 # DAD
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ping -c1 -w1 -I br0 ${NSB_IP}
|
|
log_test $? 0 "Bridge into VRF - IPv4 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6}
|
|
log_test $? 0 "Bridge into VRF - IPv6 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ping -c1 -w1 ${NSA_IP}
|
|
log_test $? 0 "Bridge into VRF - IPv4 ping in"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
|
|
log_test $? 0 "Bridge into VRF - IPv6 ping in"
|
|
|
|
modprobe br_netfilter
|
|
if [ $? -eq 0 ]; then
|
|
run_cmd ip neigh flush all
|
|
run_cmd ping -c1 -w1 -I br0 ${NSB_IP}
|
|
log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6}
|
|
log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ping -c1 -w1 ${NSA_IP}
|
|
log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping in"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
|
|
log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping in"
|
|
fi
|
|
|
|
setup_cmd ip li set br0 nomaster
|
|
setup_cmd ip li add br0.100 link br0 type vlan id 100
|
|
setup_cmd ip li set br0.100 vrf ${VRF} up
|
|
setup_cmd ip addr add dev br0.100 172.16.101.1/24
|
|
setup_cmd ip -6 addr add dev br0.100 2001:db8:101::1/64 nodad
|
|
|
|
setup_cmd_nsb ip li add vlan100 link ${NSB_DEV} type vlan id 100
|
|
setup_cmd_nsb ip addr add dev vlan100 172.16.101.2/24
|
|
setup_cmd_nsb ip -6 addr add dev vlan100 2001:db8:101::2/64 nodad
|
|
setup_cmd_nsb ip li set vlan100 up
|
|
sleep 1
|
|
|
|
rmmod br_netfilter 2>/dev/null
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ping -c1 -w1 -I br0.100 172.16.101.2
|
|
log_test $? 0 "Bridge vlan into VRF - IPv4 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2
|
|
log_test $? 0 "Bridge vlan into VRF - IPv6 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ping -c1 -w1 172.16.101.1
|
|
log_test $? 0 "Bridge vlan into VRF - IPv4 ping in"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1
|
|
log_test $? 0 "Bridge vlan into VRF - IPv6 ping in"
|
|
|
|
modprobe br_netfilter
|
|
if [ $? -eq 0 ]; then
|
|
run_cmd ip neigh flush all
|
|
run_cmd ping -c1 -w1 -I br0.100 172.16.101.2
|
|
log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv4 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2
|
|
log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv6 ping out"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ping -c1 -w1 172.16.101.1
|
|
log_test $? 0 "Bridge vlan into VRF - IPv4 ping in"
|
|
|
|
run_cmd ip neigh flush all
|
|
run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1
|
|
log_test $? 0 "Bridge vlan into VRF - IPv6 ping in"
|
|
fi
|
|
|
|
setup_cmd ip li del br0 2>/dev/null
|
|
setup_cmd_nsb ip li del vlan100 2>/dev/null
|
|
}
|
|
|
|
# VRF only.
|
|
# ns-A device is connected to both ns-B and ns-C on a single VRF but only has
|
|
# LLA on the interfaces
|
|
use_case_ping_lla_multi()
|
|
{
|
|
setup_lla_only
|
|
# only want reply from ns-A
|
|
setup_cmd_nsb sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1
|
|
setup_cmd_nsc sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1
|
|
|
|
log_start
|
|
run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
|
|
log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Pre cycle, ping out ns-B"
|
|
|
|
run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
|
|
log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Pre cycle, ping out ns-C"
|
|
|
|
# cycle/flap the first ns-A interface
|
|
setup_cmd ip link set ${NSA_DEV} down
|
|
setup_cmd ip link set ${NSA_DEV} up
|
|
sleep 1
|
|
|
|
log_start
|
|
run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
|
|
log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-B"
|
|
run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
|
|
log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-C"
|
|
|
|
# cycle/flap the second ns-A interface
|
|
setup_cmd ip link set ${NSA_DEV2} down
|
|
setup_cmd ip link set ${NSA_DEV2} up
|
|
sleep 1
|
|
|
|
log_start
|
|
run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
|
|
log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-B"
|
|
run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
|
|
log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-C"
|
|
}
|
|
|
|
# Perform IPv{4,6} SNAT on ns-A, and verify TCP connection is successfully
|
|
# established with ns-B.
|
|
use_case_snat_on_vrf()
|
|
{
|
|
setup "yes"
|
|
|
|
local port="12345"
|
|
|
|
run_cmd iptables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP} -o ${VRF}
|
|
run_cmd ip6tables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP6} -o ${VRF}
|
|
|
|
run_cmd_nsb nettest -s -l ${NSB_IP} -p ${port} &
|
|
sleep 1
|
|
run_cmd nettest -d ${VRF} -r ${NSB_IP} -p ${port}
|
|
log_test $? 0 "IPv4 TCP connection over VRF with SNAT"
|
|
|
|
run_cmd_nsb nettest -6 -s -l ${NSB_IP6} -p ${port} &
|
|
sleep 1
|
|
run_cmd nettest -6 -d ${VRF} -r ${NSB_IP6} -p ${port}
|
|
log_test $? 0 "IPv6 TCP connection over VRF with SNAT"
|
|
|
|
# Cleanup
|
|
run_cmd iptables -t nat -D POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP} -o ${VRF}
|
|
run_cmd ip6tables -t nat -D POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP6} -o ${VRF}
|
|
}
|
|
|
|
use_cases()
|
|
{
|
|
log_section "Use cases"
|
|
log_subsection "Device enslaved to bridge"
|
|
use_case_br
|
|
log_subsection "Ping LLA with multiple interfaces"
|
|
use_case_ping_lla_multi
|
|
log_subsection "SNAT on VRF"
|
|
use_case_snat_on_vrf
|
|
}
|
|
|
|
################################################################################
|
|
# usage
|
|
|
|
usage()
|
|
{
|
|
cat <<EOF
|
|
usage: ${0##*/} OPTS
|
|
|
|
-4 IPv4 tests only
|
|
-6 IPv6 tests only
|
|
-t <test> Test name/set to run
|
|
-p Pause on fail
|
|
-P Pause after each test
|
|
-v Be verbose
|
|
|
|
Tests:
|
|
$TESTS_IPV4 $TESTS_IPV6 $TESTS_OTHER
|
|
EOF
|
|
}
|
|
|
|
################################################################################
|
|
# main
|
|
|
|
TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter"
|
|
TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter"
|
|
TESTS_OTHER="use_cases"
|
|
|
|
PAUSE_ON_FAIL=no
|
|
PAUSE=no
|
|
|
|
while getopts :46t:pPvh o
|
|
do
|
|
case $o in
|
|
4) TESTS=ipv4;;
|
|
6) TESTS=ipv6;;
|
|
t) TESTS=$OPTARG;;
|
|
p) PAUSE_ON_FAIL=yes;;
|
|
P) PAUSE=yes;;
|
|
v) VERBOSE=1;;
|
|
h) usage; exit 0;;
|
|
*) usage; exit 1;;
|
|
esac
|
|
done
|
|
|
|
# make sure we don't pause twice
|
|
[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
|
|
|
|
#
|
|
# show user test config
|
|
#
|
|
if [ -z "$TESTS" ]; then
|
|
TESTS="$TESTS_IPV4 $TESTS_IPV6 $TESTS_OTHER"
|
|
elif [ "$TESTS" = "ipv4" ]; then
|
|
TESTS="$TESTS_IPV4"
|
|
elif [ "$TESTS" = "ipv6" ]; then
|
|
TESTS="$TESTS_IPV6"
|
|
fi
|
|
|
|
# nettest can be run from PATH or from same directory as this selftest
|
|
if ! which nettest >/dev/null; then
|
|
PATH=$PWD:$PATH
|
|
if ! which nettest >/dev/null; then
|
|
echo "'nettest' command not found; skipping tests"
|
|
exit $ksft_skip
|
|
fi
|
|
fi
|
|
|
|
declare -i nfail=0
|
|
declare -i nsuccess=0
|
|
|
|
for t in $TESTS
|
|
do
|
|
case $t in
|
|
ipv4_ping|ping) ipv4_ping;;
|
|
ipv4_tcp|tcp) ipv4_tcp;;
|
|
ipv4_udp|udp) ipv4_udp;;
|
|
ipv4_bind|bind) ipv4_addr_bind;;
|
|
ipv4_runtime) ipv4_runtime;;
|
|
ipv4_netfilter) ipv4_netfilter;;
|
|
|
|
ipv6_ping|ping6) ipv6_ping;;
|
|
ipv6_tcp|tcp6) ipv6_tcp;;
|
|
ipv6_udp|udp6) ipv6_udp;;
|
|
ipv6_bind|bind6) ipv6_addr_bind;;
|
|
ipv6_runtime) ipv6_runtime;;
|
|
ipv6_netfilter) ipv6_netfilter;;
|
|
|
|
use_cases) use_cases;;
|
|
|
|
# setup namespaces and config, but do not run any tests
|
|
setup) setup; exit 0;;
|
|
vrf_setup) setup "yes"; exit 0;;
|
|
esac
|
|
done
|
|
|
|
cleanup 2>/dev/null
|
|
|
|
printf "\nTests passed: %3d\n" ${nsuccess}
|
|
printf "Tests failed: %3d\n" ${nfail}
|
|
|
|
if [ $nfail -ne 0 ]; then
|
|
exit 1 # KSFT_FAIL
|
|
elif [ $nsuccess -eq 0 ]; then
|
|
exit $ksft_skip
|
|
fi
|
|
|
|
exit 0 # KSFT_PASS
|