343 lines
9.0 KiB
C
343 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
//
|
|
// rt5682.c -- RT5682 ALSA SoC audio component driver
|
|
//
|
|
// Copyright 2018 Realtek Semiconductor Corp.
|
|
// Author: Bard Liao <bardliao@realtek.com>
|
|
//
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/mutex.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/jack.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/rt5682.h>
|
|
|
|
#include "rl6231.h"
|
|
#include "rt5682.h"
|
|
|
|
static const struct rt5682_platform_data i2s_default_platform_data = {
|
|
.dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2,
|
|
.dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3,
|
|
.jd_src = RT5682_JD1,
|
|
.btndet_delay = 16,
|
|
.dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk",
|
|
.dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk",
|
|
};
|
|
|
|
static const struct regmap_config rt5682_regmap = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
.max_register = RT5682_I2C_MODE,
|
|
.volatile_reg = rt5682_volatile_register,
|
|
.readable_reg = rt5682_readable_register,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
.reg_defaults = rt5682_reg,
|
|
.num_reg_defaults = RT5682_REG_NUM,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static void rt5682_jd_check_handler(struct work_struct *work)
|
|
{
|
|
struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv,
|
|
jd_check_work.work);
|
|
|
|
if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) & RT5682_JDH_RS_MASK)
|
|
/* jack out */
|
|
mod_delayed_work(system_power_efficient_wq,
|
|
&rt5682->jack_detect_work, 0);
|
|
else
|
|
schedule_delayed_work(&rt5682->jd_check_work, 500);
|
|
}
|
|
|
|
static irqreturn_t rt5682_irq(int irq, void *data)
|
|
{
|
|
struct rt5682_priv *rt5682 = data;
|
|
|
|
mod_delayed_work(system_power_efficient_wq,
|
|
&rt5682->jack_detect_work, msecs_to_jiffies(rt5682->irq_work_delay_time));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver rt5682_dai[] = {
|
|
{
|
|
.name = "rt5682-aif1",
|
|
.id = RT5682_AIF1,
|
|
.playback = {
|
|
.stream_name = "AIF1 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = RT5682_STEREO_RATES,
|
|
.formats = RT5682_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AIF1 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = RT5682_STEREO_RATES,
|
|
.formats = RT5682_FORMATS,
|
|
},
|
|
.ops = &rt5682_aif1_dai_ops,
|
|
},
|
|
{
|
|
.name = "rt5682-aif2",
|
|
.id = RT5682_AIF2,
|
|
.capture = {
|
|
.stream_name = "AIF2 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = RT5682_STEREO_RATES,
|
|
.formats = RT5682_FORMATS,
|
|
},
|
|
.ops = &rt5682_aif2_dai_ops,
|
|
},
|
|
};
|
|
|
|
static void rt5682_i2c_disable_regulators(void *data)
|
|
{
|
|
struct rt5682_priv *rt5682 = data;
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies);
|
|
}
|
|
|
|
static int rt5682_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev);
|
|
struct rt5682_priv *rt5682;
|
|
int i, ret;
|
|
unsigned int val;
|
|
|
|
rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv),
|
|
GFP_KERNEL);
|
|
if (!rt5682)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, rt5682);
|
|
|
|
rt5682->i2c_dev = &i2c->dev;
|
|
|
|
rt5682->pdata = i2s_default_platform_data;
|
|
|
|
if (pdata)
|
|
rt5682->pdata = *pdata;
|
|
else
|
|
rt5682_parse_dt(rt5682, &i2c->dev);
|
|
|
|
rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap);
|
|
if (IS_ERR(rt5682->regmap)) {
|
|
ret = PTR_ERR(rt5682->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++)
|
|
rt5682->supplies[i].supply = rt5682_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies),
|
|
rt5682->supplies);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies),
|
|
rt5682->supplies);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&i2c->dev, rt5682_i2c_disable_regulators,
|
|
rt5682);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rt5682_get_ldo1(rt5682, &i2c->dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Sleep for 300 ms miniumum */
|
|
usleep_range(300000, 350000);
|
|
|
|
regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1);
|
|
usleep_range(10000, 15000);
|
|
|
|
regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val);
|
|
if (val != DEVICE_ID) {
|
|
dev_err(&i2c->dev,
|
|
"Device with ID register %x is not rt5682\n", val);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_init(&rt5682->calibrate_mutex);
|
|
rt5682_calibrate(rt5682);
|
|
|
|
rt5682_apply_patch_list(rt5682, &i2c->dev);
|
|
|
|
regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000);
|
|
|
|
/* DMIC pin*/
|
|
if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) {
|
|
switch (rt5682->pdata.dmic1_data_pin) {
|
|
case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */
|
|
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
|
|
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2);
|
|
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
|
|
RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA);
|
|
break;
|
|
|
|
case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */
|
|
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
|
|
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5);
|
|
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
|
|
RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n");
|
|
break;
|
|
}
|
|
|
|
switch (rt5682->pdata.dmic1_clk_pin) {
|
|
case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */
|
|
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
|
|
RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK);
|
|
break;
|
|
|
|
case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */
|
|
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
|
|
RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK);
|
|
if (rt5682->pdata.dmic_clk_driving_high)
|
|
regmap_update_bits(rt5682->regmap,
|
|
RT5682_PAD_DRIVING_CTRL,
|
|
RT5682_PAD_DRV_GP3_MASK,
|
|
2 << RT5682_PAD_DRV_GP3_SFT);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
|
|
RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
|
|
RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
|
|
regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
|
|
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
|
|
RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK,
|
|
RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1);
|
|
regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000);
|
|
regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8,
|
|
RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA);
|
|
regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1,
|
|
RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
|
|
regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
|
|
RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
|
|
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
|
|
RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2);
|
|
|
|
INIT_DELAYED_WORK(&rt5682->jack_detect_work,
|
|
rt5682_jack_detect_handler);
|
|
INIT_DELAYED_WORK(&rt5682->jd_check_work,
|
|
rt5682_jd_check_handler);
|
|
|
|
if (i2c->irq) {
|
|
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
|
|
rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
|
|
| IRQF_ONESHOT, "rt5682", rt5682);
|
|
if (!ret)
|
|
rt5682->irq = i2c->irq;
|
|
else
|
|
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
|
|
}
|
|
|
|
#ifdef CONFIG_COMMON_CLK
|
|
/* Check if MCLK provided */
|
|
rt5682->mclk = devm_clk_get_optional(&i2c->dev, "mclk");
|
|
if (IS_ERR(rt5682->mclk))
|
|
return PTR_ERR(rt5682->mclk);
|
|
|
|
/* Register CCF DAI clock control */
|
|
ret = rt5682_register_dai_clks(rt5682);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Initial setup for CCF */
|
|
rt5682->lrck[RT5682_AIF1] = 48000;
|
|
#endif
|
|
|
|
return devm_snd_soc_register_component(&i2c->dev,
|
|
&rt5682_soc_component_dev,
|
|
rt5682_dai, ARRAY_SIZE(rt5682_dai));
|
|
}
|
|
|
|
static void rt5682_i2c_shutdown(struct i2c_client *client)
|
|
{
|
|
struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
|
|
|
|
disable_irq(client->irq);
|
|
cancel_delayed_work_sync(&rt5682->jack_detect_work);
|
|
cancel_delayed_work_sync(&rt5682->jd_check_work);
|
|
|
|
rt5682_reset(rt5682);
|
|
}
|
|
|
|
static void rt5682_i2c_remove(struct i2c_client *client)
|
|
{
|
|
rt5682_i2c_shutdown(client);
|
|
}
|
|
|
|
static const struct of_device_id rt5682_of_match[] = {
|
|
{.compatible = "realtek,rt5682i"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt5682_of_match);
|
|
|
|
static const struct acpi_device_id rt5682_acpi_match[] = {
|
|
{"10EC5682", 0,},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match);
|
|
|
|
static const struct i2c_device_id rt5682_i2c_id[] = {
|
|
{"rt5682", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id);
|
|
|
|
static struct i2c_driver rt5682_i2c_driver = {
|
|
.driver = {
|
|
.name = "rt5682",
|
|
.of_match_table = rt5682_of_match,
|
|
.acpi_match_table = rt5682_acpi_match,
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
},
|
|
.probe = rt5682_i2c_probe,
|
|
.remove = rt5682_i2c_remove,
|
|
.shutdown = rt5682_i2c_shutdown,
|
|
.id_table = rt5682_i2c_id,
|
|
};
|
|
module_i2c_driver(rt5682_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC RT5682 driver");
|
|
MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>");
|
|
MODULE_LICENSE("GPL v2");
|