291 lines
7.7 KiB
C
291 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
|
|
* Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/soc/mmp/cputype.h>
|
|
|
|
#define USB2_PLL_REG0 0x4
|
|
#define USB2_PLL_REG1 0x8
|
|
#define USB2_TX_REG0 0x10
|
|
#define USB2_TX_REG1 0x14
|
|
#define USB2_TX_REG2 0x18
|
|
#define USB2_RX_REG0 0x20
|
|
#define USB2_RX_REG1 0x24
|
|
#define USB2_RX_REG2 0x28
|
|
#define USB2_ANA_REG0 0x30
|
|
#define USB2_ANA_REG1 0x34
|
|
#define USB2_ANA_REG2 0x38
|
|
#define USB2_DIG_REG0 0x3C
|
|
#define USB2_DIG_REG1 0x40
|
|
#define USB2_DIG_REG2 0x44
|
|
#define USB2_DIG_REG3 0x48
|
|
#define USB2_TEST_REG0 0x4C
|
|
#define USB2_TEST_REG1 0x50
|
|
#define USB2_TEST_REG2 0x54
|
|
#define USB2_CHARGER_REG0 0x58
|
|
#define USB2_OTG_REG0 0x5C
|
|
#define USB2_PHY_MON0 0x60
|
|
#define USB2_RESETVE_REG0 0x64
|
|
#define USB2_ICID_REG0 0x78
|
|
#define USB2_ICID_REG1 0x7C
|
|
|
|
/* USB2_PLL_REG0 */
|
|
|
|
/* This is for Ax stepping */
|
|
#define USB2_PLL_FBDIV_SHIFT_MMP3 0
|
|
#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
|
|
|
|
#define USB2_PLL_REFDIV_SHIFT_MMP3 8
|
|
#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
|
|
|
|
#define USB2_PLL_VDD12_SHIFT_MMP3 12
|
|
#define USB2_PLL_VDD18_SHIFT_MMP3 14
|
|
|
|
/* This is for B0 stepping */
|
|
#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
|
|
#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
|
|
#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
|
|
#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
|
|
#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
|
|
|
|
#define USB2_PLL_CAL12_SHIFT_MMP3 0
|
|
#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
|
|
|
|
#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
|
|
|
|
#define USB2_PLL_KVCO_SHIFT_MMP3 4
|
|
#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
|
|
|
|
#define USB2_PLL_ICP_SHIFT_MMP3 8
|
|
#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
|
|
|
|
#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
|
|
|
|
#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
|
|
#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
|
|
|
|
#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
|
|
|
|
/* USB2_TX_REG0 */
|
|
#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
|
|
#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
|
|
|
|
#define USB2_TX_RCAL_START_SHIFT_MMP3 13
|
|
|
|
/* USB2_TX_REG1 */
|
|
#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
|
|
#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
|
|
|
|
#define USB2_TX_AMP_SHIFT_MMP3 4
|
|
#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
|
|
|
|
#define USB2_TX_VDD12_SHIFT_MMP3 8
|
|
#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
|
|
|
|
/* USB2_TX_REG2 */
|
|
#define USB2_TX_DRV_SLEWRATE_SHIFT 10
|
|
|
|
/* USB2_RX_REG0 */
|
|
#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
|
|
#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
|
|
|
|
#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
|
|
#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
|
|
|
|
/* USB2_ANA_REG1*/
|
|
#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
|
|
|
|
/* USB2_OTG_REG0 */
|
|
#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
|
|
|
|
struct mmp3_usb_phy {
|
|
struct phy *phy;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
|
|
{
|
|
return readl_relaxed(base + offset);
|
|
}
|
|
|
|
static void u2o_set(void __iomem *base, unsigned int offset,
|
|
unsigned int value)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(base + offset);
|
|
reg |= value;
|
|
writel_relaxed(reg, base + offset);
|
|
readl_relaxed(base + offset);
|
|
}
|
|
|
|
static void u2o_clear(void __iomem *base, unsigned int offset,
|
|
unsigned int value)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(base + offset);
|
|
reg &= ~value;
|
|
writel_relaxed(reg, base + offset);
|
|
readl_relaxed(base + offset);
|
|
}
|
|
|
|
static int mmp3_usb_phy_init(struct phy *phy)
|
|
{
|
|
struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
|
|
void __iomem *base = mmp3_usb_phy->base;
|
|
|
|
if (cpu_is_mmp3_a0()) {
|
|
u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
|
|
| USB2_PLL_REFDIV_MASK_MMP3));
|
|
u2o_set(base, USB2_PLL_REG0,
|
|
0xd << USB2_PLL_REFDIV_SHIFT_MMP3
|
|
| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
|
|
} else if (cpu_is_mmp3_b0()) {
|
|
u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
|
|
| USB2_PLL_FBDIV_MASK_MMP3_B0);
|
|
u2o_set(base, USB2_PLL_REG0,
|
|
0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
|
|
| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
|
|
} else {
|
|
dev_err(&phy->dev, "unsupported silicon revision\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
|
|
| USB2_PLL_ICP_MASK_MMP3
|
|
| USB2_PLL_KVCO_MASK_MMP3
|
|
| USB2_PLL_CALI12_MASK_MMP3);
|
|
u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
|
|
| 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
|
|
| 3 << USB2_PLL_ICP_SHIFT_MMP3
|
|
| 3 << USB2_PLL_KVCO_SHIFT_MMP3
|
|
| 3 << USB2_PLL_CAL12_SHIFT_MMP3);
|
|
|
|
u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
|
|
u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
|
|
|
|
u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
|
|
| USB2_TX_AMP_MASK_MMP3
|
|
| USB2_TX_CK60_PHSEL_MASK_MMP3);
|
|
u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
|
|
| 4 << USB2_TX_AMP_SHIFT_MMP3
|
|
| 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
|
|
|
|
u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
|
|
u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
|
|
|
|
u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
|
|
u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
|
|
|
|
u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
|
|
|
|
u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp3_usb_phy_calibrate(struct phy *phy)
|
|
{
|
|
struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
|
|
void __iomem *base = mmp3_usb_phy->base;
|
|
int loops;
|
|
|
|
/*
|
|
* PLL VCO and TX Impedance Calibration Timing:
|
|
*
|
|
* _____________________________________
|
|
* PU __________|
|
|
* _____________________________
|
|
* VCOCAL START _________|
|
|
* ___
|
|
* REG_RCAL_START ________________| |________|_______
|
|
* | 200us | 400us | 40| 400us | USB PHY READY
|
|
*/
|
|
|
|
udelay(200);
|
|
u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
|
|
udelay(400);
|
|
u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
|
|
udelay(40);
|
|
u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
|
|
udelay(400);
|
|
|
|
loops = 0;
|
|
while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
|
|
mdelay(1);
|
|
loops++;
|
|
if (loops > 100) {
|
|
dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops mmp3_usb_phy_ops = {
|
|
.init = mmp3_usb_phy_init,
|
|
.calibrate = mmp3_usb_phy_calibrate,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id mmp3_usb_phy_of_match[] = {
|
|
{ .compatible = "marvell,mmp3-usb-phy", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
|
|
|
|
static int mmp3_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mmp3_usb_phy *mmp3_usb_phy;
|
|
struct phy_provider *provider;
|
|
|
|
mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
|
|
if (!mmp3_usb_phy)
|
|
return -ENOMEM;
|
|
|
|
mmp3_usb_phy->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mmp3_usb_phy->base)) {
|
|
dev_err(dev, "failed to remap PHY regs\n");
|
|
return PTR_ERR(mmp3_usb_phy->base);
|
|
}
|
|
|
|
mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
|
|
if (IS_ERR(mmp3_usb_phy->phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(mmp3_usb_phy->phy);
|
|
}
|
|
|
|
phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
|
|
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
if (IS_ERR(provider)) {
|
|
dev_err(dev, "failed to register PHY provider\n");
|
|
return PTR_ERR(provider);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mmp3_usb_phy_driver = {
|
|
.probe = mmp3_usb_phy_probe,
|
|
.driver = {
|
|
.name = "mmp3-usb-phy",
|
|
.of_match_table = mmp3_usb_phy_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(mmp3_usb_phy_driver);
|
|
|
|
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
|
|
MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
|
|
MODULE_LICENSE("GPL v2");
|