1074 lines
24 KiB
C
1074 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2022 Intel Corporation.
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#define OG01A1B_REG_VALUE_08BIT 1
|
|
#define OG01A1B_REG_VALUE_16BIT 2
|
|
#define OG01A1B_REG_VALUE_24BIT 3
|
|
|
|
#define OG01A1B_LINK_FREQ_500MHZ 500000000ULL
|
|
#define OG01A1B_SCLK 120000000LL
|
|
#define OG01A1B_MCLK 19200000
|
|
#define OG01A1B_DATA_LANES 2
|
|
#define OG01A1B_RGB_DEPTH 10
|
|
|
|
#define OG01A1B_REG_CHIP_ID 0x300a
|
|
#define OG01A1B_CHIP_ID 0x470141
|
|
|
|
#define OG01A1B_REG_MODE_SELECT 0x0100
|
|
#define OG01A1B_MODE_STANDBY 0x00
|
|
#define OG01A1B_MODE_STREAMING 0x01
|
|
|
|
/* vertical-timings from sensor */
|
|
#define OG01A1B_REG_VTS 0x380e
|
|
#define OG01A1B_VTS_120FPS 0x0498
|
|
#define OG01A1B_VTS_120FPS_MIN 0x0498
|
|
#define OG01A1B_VTS_MAX 0x7fff
|
|
|
|
/* horizontal-timings from sensor */
|
|
#define OG01A1B_REG_HTS 0x380c
|
|
|
|
/* Exposure controls from sensor */
|
|
#define OG01A1B_REG_EXPOSURE 0x3501
|
|
#define OG01A1B_EXPOSURE_MIN 1
|
|
#define OG01A1B_EXPOSURE_MAX_MARGIN 14
|
|
#define OG01A1B_EXPOSURE_STEP 1
|
|
|
|
/* Analog gain controls from sensor */
|
|
#define OG01A1B_REG_ANALOG_GAIN 0x3508
|
|
#define OG01A1B_ANAL_GAIN_MIN 16
|
|
#define OG01A1B_ANAL_GAIN_MAX 248 /* Max = 15.5x */
|
|
#define OG01A1B_ANAL_GAIN_STEP 1
|
|
|
|
/* Digital gain controls from sensor */
|
|
#define OG01A1B_REG_DIG_GAIN 0x350a
|
|
#define OG01A1B_DGTL_GAIN_MIN 1024
|
|
#define OG01A1B_DGTL_GAIN_MAX 16384 /* Max = 16x */
|
|
#define OG01A1B_DGTL_GAIN_STEP 1
|
|
#define OG01A1B_DGTL_GAIN_DEFAULT 1024
|
|
|
|
/* Group Access */
|
|
#define OG01A1B_REG_GROUP_ACCESS 0x3208
|
|
#define OG01A1B_GROUP_HOLD_START 0x0
|
|
#define OG01A1B_GROUP_HOLD_END 0x10
|
|
#define OG01A1B_GROUP_HOLD_LAUNCH 0xa0
|
|
|
|
/* Test Pattern Control */
|
|
#define OG01A1B_REG_TEST_PATTERN 0x5100
|
|
#define OG01A1B_TEST_PATTERN_ENABLE BIT(7)
|
|
#define OG01A1B_TEST_PATTERN_BAR_SHIFT 2
|
|
|
|
#define to_og01a1b(_sd) container_of(_sd, struct og01a1b, sd)
|
|
|
|
enum {
|
|
OG01A1B_LINK_FREQ_1000MBPS,
|
|
};
|
|
|
|
struct og01a1b_reg {
|
|
u16 address;
|
|
u8 val;
|
|
};
|
|
|
|
struct og01a1b_reg_list {
|
|
u32 num_of_regs;
|
|
const struct og01a1b_reg *regs;
|
|
};
|
|
|
|
struct og01a1b_link_freq_config {
|
|
const struct og01a1b_reg_list reg_list;
|
|
};
|
|
|
|
struct og01a1b_mode {
|
|
/* Frame width in pixels */
|
|
u32 width;
|
|
|
|
/* Frame height in pixels */
|
|
u32 height;
|
|
|
|
/* Horizontal timining size */
|
|
u32 hts;
|
|
|
|
/* Default vertical timining size */
|
|
u32 vts_def;
|
|
|
|
/* Min vertical timining size */
|
|
u32 vts_min;
|
|
|
|
/* Link frequency needed for this resolution */
|
|
u32 link_freq_index;
|
|
|
|
/* Sensor register settings for this resolution */
|
|
const struct og01a1b_reg_list reg_list;
|
|
};
|
|
|
|
static const struct og01a1b_reg mipi_data_rate_1000mbps[] = {
|
|
{0x0103, 0x01},
|
|
{0x0303, 0x02},
|
|
{0x0304, 0x00},
|
|
{0x0305, 0xd2},
|
|
{0x0323, 0x02},
|
|
{0x0324, 0x01},
|
|
{0x0325, 0x77},
|
|
};
|
|
|
|
static const struct og01a1b_reg mode_1280x1024_regs[] = {
|
|
{0x0300, 0x0a},
|
|
{0x0301, 0x29},
|
|
{0x0302, 0x31},
|
|
{0x0303, 0x02},
|
|
{0x0304, 0x00},
|
|
{0x0305, 0xd2},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x01},
|
|
{0x0308, 0x02},
|
|
{0x0309, 0x00},
|
|
{0x0310, 0x00},
|
|
{0x0311, 0x00},
|
|
{0x0312, 0x07},
|
|
{0x0313, 0x00},
|
|
{0x0314, 0x00},
|
|
{0x0315, 0x00},
|
|
{0x0320, 0x02},
|
|
{0x0321, 0x01},
|
|
{0x0322, 0x01},
|
|
{0x0323, 0x02},
|
|
{0x0324, 0x01},
|
|
{0x0325, 0x77},
|
|
{0x0326, 0xce},
|
|
{0x0327, 0x04},
|
|
{0x0329, 0x02},
|
|
{0x032a, 0x04},
|
|
{0x032b, 0x04},
|
|
{0x032c, 0x02},
|
|
{0x032d, 0x01},
|
|
{0x032e, 0x00},
|
|
{0x300d, 0x02},
|
|
{0x300e, 0x04},
|
|
{0x3021, 0x08},
|
|
{0x301e, 0x03},
|
|
{0x3103, 0x00},
|
|
{0x3106, 0x08},
|
|
{0x3107, 0x40},
|
|
{0x3216, 0x01},
|
|
{0x3217, 0x00},
|
|
{0x3218, 0xc0},
|
|
{0x3219, 0x55},
|
|
{0x3500, 0x00},
|
|
{0x3501, 0x04},
|
|
{0x3502, 0x8a},
|
|
{0x3506, 0x01},
|
|
{0x3507, 0x72},
|
|
{0x3508, 0x01},
|
|
{0x3509, 0x00},
|
|
{0x350a, 0x01},
|
|
{0x350b, 0x00},
|
|
{0x350c, 0x00},
|
|
{0x3541, 0x00},
|
|
{0x3542, 0x40},
|
|
{0x3605, 0xe0},
|
|
{0x3606, 0x41},
|
|
{0x3614, 0x20},
|
|
{0x3620, 0x0b},
|
|
{0x3630, 0x07},
|
|
{0x3636, 0xa0},
|
|
{0x3637, 0xf9},
|
|
{0x3638, 0x09},
|
|
{0x3639, 0x38},
|
|
{0x363f, 0x09},
|
|
{0x3640, 0x17},
|
|
{0x3662, 0x04},
|
|
{0x3665, 0x80},
|
|
{0x3670, 0x68},
|
|
{0x3674, 0x00},
|
|
{0x3677, 0x3f},
|
|
{0x3679, 0x00},
|
|
{0x369f, 0x19},
|
|
{0x36a0, 0x03},
|
|
{0x36a2, 0x19},
|
|
{0x36a3, 0x03},
|
|
{0x370d, 0x66},
|
|
{0x370f, 0x00},
|
|
{0x3710, 0x03},
|
|
{0x3715, 0x03},
|
|
{0x3716, 0x03},
|
|
{0x3717, 0x06},
|
|
{0x3733, 0x00},
|
|
{0x3778, 0x00},
|
|
{0x37a8, 0x0f},
|
|
{0x37a9, 0x01},
|
|
{0x37aa, 0x07},
|
|
{0x37bd, 0x1c},
|
|
{0x37c1, 0x2f},
|
|
{0x37c3, 0x09},
|
|
{0x37c8, 0x1d},
|
|
{0x37ca, 0x30},
|
|
{0x37df, 0x00},
|
|
{0x3800, 0x00},
|
|
{0x3801, 0x00},
|
|
{0x3802, 0x00},
|
|
{0x3803, 0x00},
|
|
{0x3804, 0x05},
|
|
{0x3805, 0x0f},
|
|
{0x3806, 0x04},
|
|
{0x3807, 0x0f},
|
|
{0x3808, 0x05},
|
|
{0x3809, 0x00},
|
|
{0x380a, 0x04},
|
|
{0x380b, 0x00},
|
|
{0x380c, 0x03},
|
|
{0x380d, 0x50},
|
|
{0x380e, 0x04},
|
|
{0x380f, 0x98},
|
|
{0x3810, 0x00},
|
|
{0x3811, 0x08},
|
|
{0x3812, 0x00},
|
|
{0x3813, 0x08},
|
|
{0x3814, 0x11},
|
|
{0x3815, 0x11},
|
|
{0x3820, 0x40},
|
|
{0x3821, 0x04},
|
|
{0x3826, 0x00},
|
|
{0x3827, 0x00},
|
|
{0x382a, 0x08},
|
|
{0x382b, 0x52},
|
|
{0x382d, 0xba},
|
|
{0x383d, 0x14},
|
|
{0x384a, 0xa2},
|
|
{0x3866, 0x0e},
|
|
{0x3867, 0x07},
|
|
{0x3884, 0x00},
|
|
{0x3885, 0x08},
|
|
{0x3893, 0x68},
|
|
{0x3894, 0x2a},
|
|
{0x3898, 0x00},
|
|
{0x3899, 0x31},
|
|
{0x389a, 0x04},
|
|
{0x389b, 0x00},
|
|
{0x389c, 0x0b},
|
|
{0x389d, 0xad},
|
|
{0x389f, 0x08},
|
|
{0x38a0, 0x00},
|
|
{0x38a1, 0x00},
|
|
{0x38a8, 0x70},
|
|
{0x38ac, 0xea},
|
|
{0x38b2, 0x00},
|
|
{0x38b3, 0x08},
|
|
{0x38bc, 0x20},
|
|
{0x38c4, 0x0c},
|
|
{0x38c5, 0x3a},
|
|
{0x38c7, 0x3a},
|
|
{0x38e1, 0xc0},
|
|
{0x38ec, 0x3c},
|
|
{0x38f0, 0x09},
|
|
{0x38f1, 0x6f},
|
|
{0x38fe, 0x3c},
|
|
{0x391e, 0x00},
|
|
{0x391f, 0x00},
|
|
{0x3920, 0xa5},
|
|
{0x3921, 0x00},
|
|
{0x3922, 0x00},
|
|
{0x3923, 0x00},
|
|
{0x3924, 0x05},
|
|
{0x3925, 0x00},
|
|
{0x3926, 0x00},
|
|
{0x3927, 0x00},
|
|
{0x3928, 0x1a},
|
|
{0x3929, 0x01},
|
|
{0x392a, 0xb4},
|
|
{0x392b, 0x00},
|
|
{0x392c, 0x10},
|
|
{0x392f, 0x40},
|
|
{0x4000, 0xcf},
|
|
{0x4003, 0x40},
|
|
{0x4008, 0x00},
|
|
{0x4009, 0x07},
|
|
{0x400a, 0x02},
|
|
{0x400b, 0x54},
|
|
{0x400c, 0x00},
|
|
{0x400d, 0x07},
|
|
{0x4010, 0xc0},
|
|
{0x4012, 0x02},
|
|
{0x4014, 0x04},
|
|
{0x4015, 0x04},
|
|
{0x4017, 0x02},
|
|
{0x4042, 0x01},
|
|
{0x4306, 0x04},
|
|
{0x4307, 0x12},
|
|
{0x4509, 0x00},
|
|
{0x450b, 0x83},
|
|
{0x4604, 0x68},
|
|
{0x4608, 0x0a},
|
|
{0x4700, 0x06},
|
|
{0x4800, 0x64},
|
|
{0x481b, 0x3c},
|
|
{0x4825, 0x32},
|
|
{0x4833, 0x18},
|
|
{0x4837, 0x0f},
|
|
{0x4850, 0x40},
|
|
{0x4860, 0x00},
|
|
{0x4861, 0xec},
|
|
{0x4864, 0x00},
|
|
{0x4883, 0x00},
|
|
{0x4888, 0x90},
|
|
{0x4889, 0x05},
|
|
{0x488b, 0x04},
|
|
{0x4f00, 0x04},
|
|
{0x4f10, 0x04},
|
|
{0x4f21, 0x01},
|
|
{0x4f22, 0x40},
|
|
{0x4f23, 0x44},
|
|
{0x4f24, 0x51},
|
|
{0x4f25, 0x41},
|
|
{0x5000, 0x1f},
|
|
{0x500a, 0x00},
|
|
{0x5100, 0x00},
|
|
{0x5111, 0x20},
|
|
{0x3020, 0x20},
|
|
{0x3613, 0x03},
|
|
{0x38c9, 0x02},
|
|
{0x5304, 0x01},
|
|
{0x3620, 0x08},
|
|
{0x3639, 0x58},
|
|
{0x363a, 0x10},
|
|
{0x3674, 0x04},
|
|
{0x3780, 0xff},
|
|
{0x3781, 0xff},
|
|
{0x3782, 0x00},
|
|
{0x3783, 0x01},
|
|
{0x3798, 0xa3},
|
|
{0x37aa, 0x10},
|
|
{0x38a8, 0xf0},
|
|
{0x38c4, 0x09},
|
|
{0x38c5, 0xb0},
|
|
{0x38df, 0x80},
|
|
{0x38ff, 0x05},
|
|
{0x4010, 0xf1},
|
|
{0x4011, 0x70},
|
|
{0x3667, 0x80},
|
|
{0x4d00, 0x4a},
|
|
{0x4d01, 0x18},
|
|
{0x4d02, 0xbb},
|
|
{0x4d03, 0xde},
|
|
{0x4d04, 0x93},
|
|
{0x4d05, 0xff},
|
|
{0x4d09, 0x0a},
|
|
{0x37aa, 0x16},
|
|
{0x3606, 0x42},
|
|
{0x3605, 0x00},
|
|
{0x36a2, 0x17},
|
|
{0x300d, 0x0a},
|
|
{0x4d00, 0x4d},
|
|
{0x4d01, 0x95},
|
|
{0x3d8C, 0x70},
|
|
{0x3d8d, 0xE9},
|
|
{0x5300, 0x00},
|
|
{0x5301, 0x10},
|
|
{0x5302, 0x00},
|
|
{0x5303, 0xE3},
|
|
{0x3d88, 0x00},
|
|
{0x3d89, 0x10},
|
|
{0x3d8a, 0x00},
|
|
{0x3d8b, 0xE3},
|
|
{0x4f22, 0x00},
|
|
};
|
|
|
|
static const char * const og01a1b_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Standard Color Bar",
|
|
"Top-Bottom Darker Color Bar",
|
|
"Right-Left Darker Color Bar",
|
|
"Bottom-Top Darker Color Bar"
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
OG01A1B_LINK_FREQ_500MHZ,
|
|
};
|
|
|
|
static const struct og01a1b_link_freq_config link_freq_configs[] = {
|
|
[OG01A1B_LINK_FREQ_1000MBPS] = {
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mipi_data_rate_1000mbps),
|
|
.regs = mipi_data_rate_1000mbps,
|
|
}
|
|
}
|
|
};
|
|
|
|
static const struct og01a1b_mode supported_modes[] = {
|
|
{
|
|
.width = 1280,
|
|
.height = 1024,
|
|
.hts = 848,
|
|
.vts_def = OG01A1B_VTS_120FPS,
|
|
.vts_min = OG01A1B_VTS_120FPS_MIN,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1280x1024_regs),
|
|
.regs = mode_1280x1024_regs,
|
|
},
|
|
.link_freq_index = OG01A1B_LINK_FREQ_1000MBPS,
|
|
},
|
|
};
|
|
|
|
struct og01a1b {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
/* Current mode */
|
|
const struct og01a1b_mode *cur_mode;
|
|
|
|
/* To serialize asynchronus callbacks */
|
|
struct mutex mutex;
|
|
};
|
|
|
|
static u64 to_pixel_rate(u32 f_index)
|
|
{
|
|
u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OG01A1B_DATA_LANES;
|
|
|
|
do_div(pixel_rate, OG01A1B_RGB_DEPTH);
|
|
|
|
return pixel_rate;
|
|
}
|
|
|
|
static u64 to_pixels_per_line(u32 hts, u32 f_index)
|
|
{
|
|
u64 ppl = hts * to_pixel_rate(f_index);
|
|
|
|
do_div(ppl, OG01A1B_SCLK);
|
|
|
|
return ppl;
|
|
}
|
|
|
|
static int og01a1b_read_reg(struct og01a1b *og01a1b, u16 reg, u16 len, u32 *val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
struct i2c_msg msgs[2];
|
|
u8 addr_buf[2];
|
|
u8 data_buf[4] = {0};
|
|
int ret;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = sizeof(addr_buf);
|
|
msgs[0].buf = addr_buf;
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_write_reg(struct og01a1b *og01a1b, u16 reg, u16 len, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
u8 buf[6];
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
put_unaligned_be32(val << 8 * (4 - len), buf + 2);
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_write_reg_list(struct og01a1b *og01a1b,
|
|
const struct og01a1b_reg_list *r_list)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < r_list->num_of_regs; i++) {
|
|
ret = og01a1b_write_reg(og01a1b, r_list->regs[i].address, 1,
|
|
r_list->regs[i].val);
|
|
if (ret) {
|
|
dev_err_ratelimited(&client->dev,
|
|
"failed to write reg 0x%4.4x. error = %d",
|
|
r_list->regs[i].address, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_test_pattern(struct og01a1b *og01a1b, u32 pattern)
|
|
{
|
|
if (pattern)
|
|
pattern = (pattern - 1) << OG01A1B_TEST_PATTERN_BAR_SHIFT |
|
|
OG01A1B_TEST_PATTERN_ENABLE;
|
|
|
|
return og01a1b_write_reg(og01a1b, OG01A1B_REG_TEST_PATTERN,
|
|
OG01A1B_REG_VALUE_08BIT, pattern);
|
|
}
|
|
|
|
static int og01a1b_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct og01a1b *og01a1b = container_of(ctrl->handler,
|
|
struct og01a1b, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
s64 exposure_max;
|
|
int ret = 0;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = og01a1b->cur_mode->height + ctrl->val -
|
|
OG01A1B_EXPOSURE_MAX_MARGIN;
|
|
__v4l2_ctrl_modify_range(og01a1b->exposure,
|
|
og01a1b->exposure->minimum,
|
|
exposure_max, og01a1b->exposure->step,
|
|
exposure_max);
|
|
}
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_ANALOG_GAIN,
|
|
OG01A1B_REG_VALUE_16BIT,
|
|
ctrl->val << 4);
|
|
break;
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_DIG_GAIN,
|
|
OG01A1B_REG_VALUE_24BIT,
|
|
ctrl->val << 6);
|
|
break;
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_EXPOSURE,
|
|
OG01A1B_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_VBLANK:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_VTS,
|
|
OG01A1B_REG_VALUE_16BIT,
|
|
og01a1b->cur_mode->height + ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = og01a1b_test_pattern(og01a1b, ctrl->val);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops og01a1b_ctrl_ops = {
|
|
.s_ctrl = og01a1b_set_ctrl,
|
|
};
|
|
|
|
static int og01a1b_init_controls(struct og01a1b *og01a1b)
|
|
{
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
s64 exposure_max, h_blank;
|
|
int ret;
|
|
|
|
ctrl_hdlr = &og01a1b->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_hdlr->lock = &og01a1b->mutex;
|
|
og01a1b->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
|
|
&og01a1b_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE
|
|
(link_freq_menu_items) - 1,
|
|
0, link_freq_menu_items);
|
|
if (og01a1b->link_freq)
|
|
og01a1b->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
og01a1b->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
to_pixel_rate
|
|
(OG01A1B_LINK_FREQ_1000MBPS),
|
|
1,
|
|
to_pixel_rate
|
|
(OG01A1B_LINK_FREQ_1000MBPS));
|
|
og01a1b->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_VBLANK,
|
|
og01a1b->cur_mode->vts_min -
|
|
og01a1b->cur_mode->height,
|
|
OG01A1B_VTS_MAX -
|
|
og01a1b->cur_mode->height, 1,
|
|
og01a1b->cur_mode->vts_def -
|
|
og01a1b->cur_mode->height);
|
|
h_blank = to_pixels_per_line(og01a1b->cur_mode->hts,
|
|
og01a1b->cur_mode->link_freq_index) -
|
|
og01a1b->cur_mode->width;
|
|
og01a1b->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_HBLANK, h_blank, h_blank,
|
|
1, h_blank);
|
|
if (og01a1b->hblank)
|
|
og01a1b->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
OG01A1B_ANAL_GAIN_MIN, OG01A1B_ANAL_GAIN_MAX,
|
|
OG01A1B_ANAL_GAIN_STEP, OG01A1B_ANAL_GAIN_MIN);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
OG01A1B_DGTL_GAIN_MIN, OG01A1B_DGTL_GAIN_MAX,
|
|
OG01A1B_DGTL_GAIN_STEP, OG01A1B_DGTL_GAIN_DEFAULT);
|
|
exposure_max = (og01a1b->cur_mode->vts_def -
|
|
OG01A1B_EXPOSURE_MAX_MARGIN);
|
|
og01a1b->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
OG01A1B_EXPOSURE_MIN,
|
|
exposure_max,
|
|
OG01A1B_EXPOSURE_STEP,
|
|
exposure_max);
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(og01a1b_test_pattern_menu) - 1,
|
|
0, 0, og01a1b_test_pattern_menu);
|
|
|
|
if (ctrl_hdlr->error)
|
|
return ctrl_hdlr->error;
|
|
|
|
og01a1b->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void og01a1b_update_pad_format(const struct og01a1b_mode *mode,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->width = mode->width;
|
|
fmt->height = mode->height;
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int og01a1b_start_streaming(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
const struct og01a1b_reg_list *reg_list;
|
|
int link_freq_index, ret;
|
|
|
|
link_freq_index = og01a1b->cur_mode->link_freq_index;
|
|
reg_list = &link_freq_configs[link_freq_index].reg_list;
|
|
|
|
ret = og01a1b_write_reg_list(og01a1b, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set plls");
|
|
return ret;
|
|
}
|
|
|
|
reg_list = &og01a1b->cur_mode->reg_list;
|
|
ret = og01a1b_write_reg_list(og01a1b, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set mode");
|
|
return ret;
|
|
}
|
|
|
|
ret = __v4l2_ctrl_handler_setup(og01a1b->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_MODE_SELECT,
|
|
OG01A1B_REG_VALUE_08BIT,
|
|
OG01A1B_MODE_STREAMING);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set stream");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void og01a1b_stop_streaming(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
|
|
if (og01a1b_write_reg(og01a1b, OG01A1B_REG_MODE_SELECT,
|
|
OG01A1B_REG_VALUE_08BIT, OG01A1B_MODE_STANDBY))
|
|
dev_err(&client->dev, "failed to set stream");
|
|
}
|
|
|
|
static int og01a1b_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
if (ret) {
|
|
mutex_unlock(&og01a1b->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = og01a1b_start_streaming(og01a1b);
|
|
if (ret) {
|
|
enable = 0;
|
|
og01a1b_stop_streaming(og01a1b);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
} else {
|
|
og01a1b_stop_streaming(og01a1b);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og01a1b_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
const struct og01a1b_mode *mode;
|
|
s32 vblank_def, h_blank;
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes), width,
|
|
height, fmt->format.width,
|
|
fmt->format.height);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
og01a1b_update_pad_format(mode, &fmt->format);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
*v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
|
|
} else {
|
|
og01a1b->cur_mode = mode;
|
|
__v4l2_ctrl_s_ctrl(og01a1b->link_freq, mode->link_freq_index);
|
|
__v4l2_ctrl_s_ctrl_int64(og01a1b->pixel_rate,
|
|
to_pixel_rate(mode->link_freq_index));
|
|
|
|
/* Update limits and set FPS to default */
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(og01a1b->vblank,
|
|
mode->vts_min - mode->height,
|
|
OG01A1B_VTS_MAX - mode->height, 1,
|
|
vblank_def);
|
|
__v4l2_ctrl_s_ctrl(og01a1b->vblank, vblank_def);
|
|
h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
|
|
mode->width;
|
|
__v4l2_ctrl_modify_range(og01a1b->hblank, h_blank, h_blank, 1,
|
|
h_blank);
|
|
}
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
fmt->format = *v4l2_subdev_state_get_format(sd_state,
|
|
fmt->pad);
|
|
else
|
|
og01a1b_update_pad_format(og01a1b->cur_mode, &fmt->format);
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
og01a1b_update_pad_format(&supported_modes[0],
|
|
v4l2_subdev_state_get_format(fh->state, 0));
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops og01a1b_video_ops = {
|
|
.s_stream = og01a1b_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops og01a1b_pad_ops = {
|
|
.set_fmt = og01a1b_set_format,
|
|
.get_fmt = og01a1b_get_format,
|
|
.enum_mbus_code = og01a1b_enum_mbus_code,
|
|
.enum_frame_size = og01a1b_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops og01a1b_subdev_ops = {
|
|
.video = &og01a1b_video_ops,
|
|
.pad = &og01a1b_pad_ops,
|
|
};
|
|
|
|
static const struct media_entity_operations og01a1b_subdev_entity_ops = {
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops og01a1b_internal_ops = {
|
|
.open = og01a1b_open,
|
|
};
|
|
|
|
static int og01a1b_identify_module(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = og01a1b_read_reg(og01a1b, OG01A1B_REG_CHIP_ID,
|
|
OG01A1B_REG_VALUE_24BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != OG01A1B_CHIP_ID) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
OG01A1B_CHIP_ID, val);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_check_hwcfg(struct device *dev)
|
|
{
|
|
struct fwnode_handle *ep;
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
u32 mclk;
|
|
int ret;
|
|
unsigned int i, j;
|
|
|
|
if (!fwnode)
|
|
return -ENXIO;
|
|
|
|
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "can't get clock frequency");
|
|
return ret;
|
|
}
|
|
|
|
if (mclk != OG01A1B_MCLK) {
|
|
dev_err(dev, "external clock %d is not supported", mclk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
if (!ep)
|
|
return -ENXIO;
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
fwnode_handle_put(ep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bus_cfg.bus.mipi_csi2.num_data_lanes != OG01A1B_DATA_LANES) {
|
|
dev_err(dev, "number of CSI2 data lanes %d is not supported",
|
|
bus_cfg.bus.mipi_csi2.num_data_lanes);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequencies defined");
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
|
|
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
|
|
if (link_freq_menu_items[i] ==
|
|
bus_cfg.link_frequencies[j])
|
|
break;
|
|
}
|
|
|
|
if (j == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequency %lld supported",
|
|
link_freq_menu_items[i]);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
}
|
|
|
|
check_hwcfg_error:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void og01a1b_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
pm_runtime_disable(&client->dev);
|
|
mutex_destroy(&og01a1b->mutex);
|
|
}
|
|
|
|
static int og01a1b_probe(struct i2c_client *client)
|
|
{
|
|
struct og01a1b *og01a1b;
|
|
int ret;
|
|
|
|
ret = og01a1b_check_hwcfg(&client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to check HW configuration: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
og01a1b = devm_kzalloc(&client->dev, sizeof(*og01a1b), GFP_KERNEL);
|
|
if (!og01a1b)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&og01a1b->sd, client, &og01a1b_subdev_ops);
|
|
ret = og01a1b_identify_module(og01a1b);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&og01a1b->mutex);
|
|
og01a1b->cur_mode = &supported_modes[0];
|
|
ret = og01a1b_init_controls(og01a1b);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
og01a1b->sd.internal_ops = &og01a1b_internal_ops;
|
|
og01a1b->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
og01a1b->sd.entity.ops = &og01a1b_subdev_entity_ops;
|
|
og01a1b->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
og01a1b->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ret = media_entity_pads_init(&og01a1b->sd.entity, 1, &og01a1b->pad);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&og01a1b->sd);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
|
|
ret);
|
|
goto probe_error_media_entity_cleanup;
|
|
}
|
|
|
|
/*
|
|
* Device is already turned on by i2c-core with ACPI domain PM.
|
|
* Enable runtime PM and turn off the device.
|
|
*/
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
return 0;
|
|
|
|
probe_error_media_entity_cleanup:
|
|
media_entity_cleanup(&og01a1b->sd.entity);
|
|
|
|
probe_error_v4l2_ctrl_handler_free:
|
|
v4l2_ctrl_handler_free(og01a1b->sd.ctrl_handler);
|
|
mutex_destroy(&og01a1b->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id og01a1b_acpi_ids[] = {
|
|
{"OVTI01AC"},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, og01a1b_acpi_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver og01a1b_i2c_driver = {
|
|
.driver = {
|
|
.name = "og01a1b",
|
|
.acpi_match_table = ACPI_PTR(og01a1b_acpi_ids),
|
|
},
|
|
.probe = og01a1b_probe,
|
|
.remove = og01a1b_remove,
|
|
};
|
|
|
|
module_i2c_driver(og01a1b_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Tu");
|
|
MODULE_DESCRIPTION("OmniVision OG01A1B sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|