927 lines
19 KiB
Plaintext
927 lines
19 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/* PM7250B is configured to use SID8/9 */
|
|
#define PM7250B_SID 8
|
|
#define PM7250B_SID1 9
|
|
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include "sc7280.dtsi"
|
|
#include "pm7250b.dtsi"
|
|
#include "pm7325.dtsi"
|
|
#include "pm8350c.dtsi" /* PM7350C */
|
|
#include "pmk8350.dtsi" /* PMK7325 */
|
|
|
|
/delete-node/ &rmtfs_mem;
|
|
|
|
/ {
|
|
model = "Fairphone 5";
|
|
compatible = "fairphone,fp5", "qcom,qcm6490";
|
|
chassis-type = "handset";
|
|
|
|
aliases {
|
|
serial0 = &uart5;
|
|
serial1 = &uart7;
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
framebuffer0: framebuffer@a000000 {
|
|
compatible = "simple-framebuffer";
|
|
reg = <0x0 0xe1000000 0x0 (2700 * 1224 * 4)>;
|
|
width = <1224>;
|
|
height = <2700>;
|
|
stride = <(1224 * 4)>;
|
|
format = "a8r8g8b8";
|
|
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&volume_down_default>, <&hall_sensor_default>;
|
|
pinctrl-names = "default";
|
|
|
|
key-volume-up {
|
|
label = "Volume up";
|
|
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
/* Powered by the always-on vreg_l8c */
|
|
event-hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&tlmm 155 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
cont_splash_mem: cont-splash@e1000000 {
|
|
reg = <0x0 0xe1000000 0x0 0x2300000>;
|
|
no-map;
|
|
};
|
|
|
|
cdsp_mem: cdsp@88f00000 {
|
|
reg = <0x0 0x88f00000 0x0 0x1e00000>;
|
|
no-map;
|
|
};
|
|
|
|
removed_mem: removed@c0000000 {
|
|
reg = <0x0 0xc0000000 0x0 0x5100000>;
|
|
no-map;
|
|
};
|
|
|
|
rmtfs_mem: memory@f8500000 {
|
|
compatible = "qcom,rmtfs-mem";
|
|
reg = <0x0 0xf8500000 0x0 0x600000>;
|
|
no-map;
|
|
|
|
qcom,client-id = <1>;
|
|
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
|
|
};
|
|
};
|
|
|
|
ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "OIS_AVDD0_1P8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vreg_bob>;
|
|
};
|
|
|
|
ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "OIS_DVDD_1P1";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vreg_s8b>;
|
|
};
|
|
|
|
afvdd_2p8: regulator-afvdd-2p8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "AFVDD_2P8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vreg_bob>;
|
|
};
|
|
|
|
thermal-zones {
|
|
camera-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm 2>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
chg-skin-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pm7250b_adc_tm 0>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
conn-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pm7250b_adc_tm 1>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
quiet-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm 1>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
rear-cam-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm 4>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sdm-skin-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm 3>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
xo-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm 0>;
|
|
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&apps_rsc {
|
|
regulators-0 {
|
|
compatible = "qcom,pm7325-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
vreg_s1b: smps1 {
|
|
regulator-min-microvolt = <1840000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
vreg_s7b: smps7 {
|
|
regulator-min-microvolt = <535000>;
|
|
regulator-max-microvolt = <1120000>;
|
|
};
|
|
|
|
vreg_s8b: smps8 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
|
|
};
|
|
|
|
vreg_l1b: ldo1 {
|
|
regulator-min-microvolt = <825000>;
|
|
regulator-max-microvolt = <925000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2b: ldo2 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3b: ldo3 {
|
|
regulator-min-microvolt = <312000>;
|
|
regulator-max-microvolt = <910000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6b: ldo6 {
|
|
regulator-min-microvolt = <1140000>;
|
|
regulator-max-microvolt = <1260000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7b: ldo7 {
|
|
/* Constrained for UFS VCC, at least until UFS driver scales voltage */
|
|
regulator-min-microvolt = <2952000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l8b: ldo8 {
|
|
regulator-min-microvolt = <870000>;
|
|
regulator-max-microvolt = <970000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l9b: ldo9 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11b: ldo11 {
|
|
regulator-min-microvolt = <1504000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l12b: ldo12 {
|
|
regulator-min-microvolt = <751000>;
|
|
regulator-max-microvolt = <824000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l13b: ldo13 {
|
|
regulator-min-microvolt = <530000>;
|
|
regulator-max-microvolt = <824000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l14b: ldo14 {
|
|
regulator-min-microvolt = <1080000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l15b: ldo15 {
|
|
regulator-min-microvolt = <765000>;
|
|
regulator-max-microvolt = <1020000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l16b: ldo16 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l17b: ldo17 {
|
|
regulator-min-microvolt = <1700000>;
|
|
regulator-max-microvolt = <1900000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l18b: ldo18 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l19b: ldo19 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
regulators-1 {
|
|
compatible = "qcom,pm8350c-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
vreg_s1c: smps1 {
|
|
regulator-min-microvolt = <2190000>;
|
|
regulator-max-microvolt = <2210000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_s9c: smps9 {
|
|
regulator-min-microvolt = <1010000>;
|
|
regulator-max-microvolt = <1170000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l1c: ldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1980000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l2c: ldo2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1950000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l3c: ldo3 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l4c: ldo4 {
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5c: ldo5 {
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l6c: ldo6 {
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7c: ldo7 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l8c: ldo8 {
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
/* Hall sensor VDD */
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_l9c: ldo9 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l10c: ldo10 {
|
|
regulator-min-microvolt = <720000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l11c: ldo11 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l12c: ldo12 {
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l13c: ldo13 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dispcc {
|
|
/* Disable for now so simple-framebuffer continues working */
|
|
status = "disabled";
|
|
};
|
|
|
|
&gcc {
|
|
protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
|
|
<GCC_EDP_CLKREF_EN>,
|
|
<GCC_MSS_CFG_AHB_CLK>,
|
|
<GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
|
|
<GCC_MSS_OFFLINE_AXI_CLK>,
|
|
<GCC_MSS_Q6SS_BOOT_CLK_SRC>,
|
|
<GCC_MSS_Q6_MEMNOC_AXI_CLK>,
|
|
<GCC_MSS_SNOC_AXI_CLK>,
|
|
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
|
<GCC_QSPI_CORE_CLK>,
|
|
<GCC_QSPI_CORE_CLK_SRC>,
|
|
<GCC_SEC_CTRL_CLK_SRC>,
|
|
<GCC_WPSS_AHB_BDG_MST_CLK>,
|
|
<GCC_WPSS_AHB_CLK>,
|
|
<GCC_WPSS_RSCP_CLK>;
|
|
};
|
|
|
|
&gpi_dma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
/* PM8008 PMIC @ 8 and 9 */
|
|
/* Pixelworks @ 26 */
|
|
/* FSA4480 USB audio switch @ 42 */
|
|
/* AW86927FCR haptics @ 5a */
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
/* AW88261FCR amplifier @ 34 */
|
|
/* AW88261FCR amplifier @ 35 */
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
/* PTN36502 USB redriver @ 1a */
|
|
};
|
|
|
|
&i2c9 {
|
|
status = "okay";
|
|
|
|
/* ST21NFC NFC @ 28 */
|
|
/* VL53L3 ToF @ 29 */
|
|
};
|
|
|
|
&ipa {
|
|
qcom,gsi-loader = "self";
|
|
memory-region = <&ipa_fw_mem>;
|
|
firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
|
|
status = "okay";
|
|
};
|
|
|
|
&pm7250b_adc {
|
|
channel@4d {
|
|
reg = <ADC5_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "charger_skin_therm";
|
|
};
|
|
|
|
channel@4f {
|
|
reg = <ADC5_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "conn_therm";
|
|
};
|
|
};
|
|
|
|
&pm7250b_adc_tm {
|
|
status = "okay";
|
|
|
|
charger-skin-therm@0 {
|
|
reg = <0>;
|
|
io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
|
|
conn-therm@1 {
|
|
reg = <1>;
|
|
io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
};
|
|
|
|
&pm7325_gpios {
|
|
volume_down_default: volume-down-default-state {
|
|
pins = "gpio6";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <1>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
&pm8350c_flash {
|
|
status = "okay";
|
|
|
|
led-0 {
|
|
function = LED_FUNCTION_FLASH;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
led-sources = <1>, <4>;
|
|
led-max-microamp = <500000>;
|
|
flash-max-microamp = <1500000>;
|
|
flash-max-timeout-us = <1280000>;
|
|
};
|
|
};
|
|
|
|
&pmk8350_adc_tm {
|
|
status = "okay";
|
|
|
|
xo-therm@0 {
|
|
reg = <0>;
|
|
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
|
|
quiet-therm@1 {
|
|
reg = <1>;
|
|
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
|
|
cam-flash-therm@2 {
|
|
reg = <2>;
|
|
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
|
|
sdm-skin-therm@3 {
|
|
reg = <3>;
|
|
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
|
|
wide-rfc-therm@4 {
|
|
reg = <4>;
|
|
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
};
|
|
|
|
&pmk8350_rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&pmk8350_vadc {
|
|
status = "okay";
|
|
|
|
channel@44 {
|
|
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pmk8350_xo_therm";
|
|
};
|
|
|
|
channel@144 {
|
|
reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pm7325_quiet_therm";
|
|
};
|
|
|
|
channel@145 {
|
|
reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pm7325_cam_flash_therm";
|
|
};
|
|
|
|
channel@146 {
|
|
reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pm7325_sdm_skin_therm";
|
|
};
|
|
|
|
channel@147 {
|
|
reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pm7325_wide_rfc_therm";
|
|
};
|
|
};
|
|
|
|
&pon_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&pon_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
status = "okay";
|
|
};
|
|
|
|
&qup_spi13_cs {
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qup_spi13_data_clk {
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qup_uart5_rx {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qup_uart5_tx {
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_adsp {
|
|
firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_cdsp {
|
|
firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_mpss {
|
|
firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_wpss {
|
|
firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
|
|
status = "okay";
|
|
};
|
|
|
|
&sdc2_clk {
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
&sdc2_cmd {
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
&sdc2_data {
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
vmmc-supply = <&vreg_l9c>;
|
|
vqmmc-supply = <&vreg_l6c>;
|
|
|
|
pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
|
|
pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&spi13 {
|
|
status = "okay";
|
|
|
|
/* Goodix touchscreen @ 0 */
|
|
};
|
|
|
|
&tlmm {
|
|
/*
|
|
* 32-33: SMB1394 (SPMI)
|
|
* 56-59: fingerprint reader (SPI)
|
|
*/
|
|
gpio-reserved-ranges = <32 2>, <56 4>;
|
|
|
|
bluetooth_enable_default: bluetooth-enable-default-state {
|
|
pins = "gpio85";
|
|
function = "gpio";
|
|
output-low;
|
|
bias-disable;
|
|
};
|
|
|
|
hall_sensor_default: hall-sensor-default-state {
|
|
pins = "gpio155";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
|
|
pins = "gpio28";
|
|
function = "gpio";
|
|
/*
|
|
* Configure a bias-bus-hold on CTS to lower power
|
|
* usage when Bluetooth is turned off. Bus hold will
|
|
* maintain a low power state regardless of whether
|
|
* the Bluetooth module drives the pin in either
|
|
* direction or leaves the pin fully unpowered.
|
|
*/
|
|
bias-bus-hold;
|
|
};
|
|
|
|
qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
|
|
pins = "gpio29";
|
|
function = "gpio";
|
|
/*
|
|
* Configure pull-down on RTS. As RTS is active low
|
|
* signal, pull it low to indicate the BT SoC that it
|
|
* can wakeup the system anytime from suspend state by
|
|
* pulling RX low (by sending wakeup bytes).
|
|
*/
|
|
bias-pull-down;
|
|
};
|
|
|
|
qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
|
|
pins = "gpio30";
|
|
function = "gpio";
|
|
/*
|
|
* Configure pull-up on TX when it isn't actively driven
|
|
* to prevent BT SoC from receiving garbage during sleep.
|
|
*/
|
|
bias-pull-up;
|
|
};
|
|
|
|
qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
|
|
pins = "gpio31";
|
|
function = "gpio";
|
|
/*
|
|
* Configure a pull-up on RX. This is needed to avoid
|
|
* garbage data when the TX pin of the Bluetooth module
|
|
* is floating which may cause spurious wakeups.
|
|
*/
|
|
bias-pull-up;
|
|
};
|
|
|
|
sw_ctrl_default: sw-ctrl-default-state {
|
|
pins = "gpio86";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&uart5 {
|
|
compatible = "qcom,geni-debug-uart";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart7 {
|
|
/delete-property/interrupts;
|
|
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
status = "okay";
|
|
|
|
bluetooth: bluetooth {
|
|
compatible = "qcom,wcn6750-bt";
|
|
|
|
pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
|
|
pinctrl-names = "default";
|
|
|
|
enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
|
|
swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
|
|
|
vddio-supply = <&vreg_l19b>;
|
|
vddaon-supply = <&vreg_s7b>;
|
|
vddbtcxmx-supply = <&vreg_s7b>;
|
|
vddrfacmn-supply = <&vreg_s7b>;
|
|
vddrfa0p8-supply = <&vreg_s7b>;
|
|
vddrfa1p7-supply = <&vreg_s1b>;
|
|
vddrfa1p2-supply = <&vreg_s8b>;
|
|
vddrfa2p2-supply = <&vreg_s1c>;
|
|
vddasd-supply = <&vreg_l11c>;
|
|
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l7b>;
|
|
vcc-max-microamp = <800000>;
|
|
/*
|
|
* Technically l9b enables an eLDO (supplied by s1b) which then powers
|
|
* VCCQ2 of the UFS.
|
|
*/
|
|
vccq-supply = <&vreg_l9b>;
|
|
vccq-max-microamp = <900000>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
vdda-phy-supply = <&vreg_l10c>;
|
|
vdda-pll-supply = <&vreg_l6b>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
vdda-pll-supply = <&vreg_l10c>;
|
|
vdda18-supply = <&vreg_l1c>;
|
|
vdda33-supply = <&vreg_l2b>;
|
|
|
|
qcom,hs-crossover-voltage-microvolt = <28000>;
|
|
qcom,hs-output-impedance-micro-ohms = <2600000>;
|
|
qcom,hs-rise-fall-time-bp = <5430>;
|
|
qcom,hs-disconnect-bp = <1743>;
|
|
qcom,hs-amplitude-bp = <2430>;
|
|
|
|
qcom,pre-emphasis-amplitude-bp = <20000>;
|
|
qcom,pre-emphasis-duration-bp = <20000>;
|
|
|
|
qcom,squelch-detector-bp = <(-2090)>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
vdda-phy-supply = <&vreg_l6b>;
|
|
vdda-pll-supply = <&vreg_l1b>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
qcom,ath11k-calibration-variant = "Fairphone_5";
|
|
status = "okay";
|
|
};
|