281 lines
8.0 KiB
YAML
281 lines
8.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm SoundWire Controller
|
|
|
|
maintainers:
|
|
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
- Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
|
|
|
|
description:
|
|
The Qualcomm SoundWire controller along with its board specific bus parameters.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,soundwire-v1.3.0
|
|
- qcom,soundwire-v1.5.0
|
|
- qcom,soundwire-v1.5.1
|
|
- qcom,soundwire-v1.6.0
|
|
- qcom,soundwire-v1.7.0
|
|
- qcom,soundwire-v2.0.0
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: specify the SoundWire controller core.
|
|
- description: specify the Soundwire controller wake IRQ.
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
items:
|
|
- const: core
|
|
- const: wakeup
|
|
|
|
clocks:
|
|
items:
|
|
- description: iface clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: iface
|
|
|
|
resets:
|
|
items:
|
|
- description: SWR_AUDIO_CGCR RESET
|
|
|
|
reset-names:
|
|
items:
|
|
- const: swr_audio_cgcr
|
|
|
|
'#sound-dai-cells':
|
|
const: 1
|
|
|
|
'#address-cells':
|
|
const: 2
|
|
|
|
'#size-cells':
|
|
const: 0
|
|
|
|
wakeup-source: true
|
|
|
|
qcom,din-ports:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: count of data in ports
|
|
|
|
qcom,dout-ports:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: count of data out ports
|
|
|
|
qcom,ports-word-length:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Size of payload channel sample.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-sinterval-low:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Sample interval (only lowest byte) of each data port.
|
|
Out ports followed by In ports. Used for Sample Interval calculation.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-sinterval:
|
|
$ref: /schemas/types.yaml#/definitions/uint16-array
|
|
description:
|
|
Sample interval of each data port.
|
|
Out ports followed by In ports. Used for Sample Interval calculation.
|
|
Value of 0xffff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-offset1:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Payload transport window offset1 of each data port.
|
|
Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-offset2:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Payload transport window offset2 of each data port.
|
|
Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-lane-control:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Identify which data lane the data port uses.
|
|
Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
|
|
qcom,ports-block-pack-mode:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Indicate the block packing mode.
|
|
0 to indicate Blocks are per Channel
|
|
1 to indicate Blocks are per Port.
|
|
Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
items:
|
|
oneOf:
|
|
- minimum: 0
|
|
maximum: 1
|
|
- const: 0xff
|
|
|
|
qcom,ports-hstart:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Identifying lowerst numbered column in SoundWire Frame,
|
|
i.e. left edge of the Transport sub-frame for each port.
|
|
Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
items:
|
|
oneOf:
|
|
- minimum: 0
|
|
maximum: 15
|
|
- const: 0xff
|
|
|
|
qcom,ports-hstop:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Identifying highest numbered column in SoundWire Frame,
|
|
i.e. the right edge of the Transport
|
|
sub-frame for each port. Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
items:
|
|
oneOf:
|
|
- minimum: 0
|
|
maximum: 15
|
|
- const: 0xff
|
|
|
|
qcom,ports-block-group-count:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
In range 1 to 4 to indicate how many sample intervals are combined
|
|
into a payload. Out ports followed by In ports.
|
|
Value of 0xff indicates that this option is not implemented
|
|
or applicable for the respective data port.
|
|
More info in MIPI Alliance SoundWire 1.0 Specifications.
|
|
minItems: 3
|
|
maxItems: 16
|
|
items:
|
|
oneOf:
|
|
- minimum: 0
|
|
maximum: 4
|
|
- const: 0xff
|
|
|
|
label:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- '#sound-dai-cells'
|
|
- '#address-cells'
|
|
- '#size-cells'
|
|
- qcom,dout-ports
|
|
- qcom,din-ports
|
|
- qcom,ports-offset1
|
|
- qcom,ports-offset2
|
|
|
|
oneOf:
|
|
- required:
|
|
- qcom,ports-sinterval-low
|
|
- required:
|
|
- qcom,ports-sinterval
|
|
|
|
allOf:
|
|
- $ref: soundwire-controller.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
|
|
|
|
soundwire@3210000 {
|
|
compatible = "qcom,soundwire-v1.6.0";
|
|
reg = <0x03210000 0x2000>;
|
|
|
|
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-names = "core", "wakeup";
|
|
|
|
clocks = <&lpass_rx_macro>;
|
|
clock-names = "iface";
|
|
|
|
qcom,din-ports = <0>;
|
|
qcom,dout-ports = <5>;
|
|
|
|
resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
|
|
reset-names = "swr_audio_cgcr";
|
|
|
|
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
|
|
qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
|
|
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
|
|
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
|
|
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
|
|
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
|
|
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
|
|
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
|
|
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
|
|
|
|
#sound-dai-cells = <1>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
codec@0,4 {
|
|
compatible = "sdw20217010d00";
|
|
reg = <0 4>;
|
|
qcom,rx-port-mapping = <1 2 3 4 5>;
|
|
};
|
|
};
|