99 lines
2.2 KiB
YAML
99 lines
2.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier
|
|
|
|
maintainers:
|
|
- Ryan Lee <ryans.lee@maximintegrated.com>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- maxim,max98925
|
|
- maxim,max98926
|
|
- maxim,max98927
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
|
|
'#sound-dai-cells':
|
|
const: 0
|
|
|
|
vmon-slot-no:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 30
|
|
default: 0
|
|
description:
|
|
Slot number used to send voltage information or in inteleave mode this
|
|
will be used as interleave slot.
|
|
|
|
imon-slot-no:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 30
|
|
default: 0
|
|
description:
|
|
Slot number used to send current information.
|
|
|
|
maxim,interleave-mode:
|
|
type: boolean
|
|
description:
|
|
When using two MAX9892X in a system it is possible to create ADC data
|
|
that will overflow the frame size. When enabled, the Digital Audio
|
|
Interleave mode provides a means to output VMON and IMON data from two
|
|
devices on a single DOUT line when running smaller frames sizes such as
|
|
32 BCLKS per LRCLK or 48 BCLKS per LRCLK.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: dai-common.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- maxim,max98927
|
|
then:
|
|
properties:
|
|
vmon-slot-no:
|
|
minimum: 0
|
|
maximum: 15
|
|
|
|
imon-slot-no:
|
|
minimum: 0
|
|
maximum: 15
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
audio-codec@3a {
|
|
compatible = "maxim,max98927";
|
|
reg = <0x3a>;
|
|
#sound-dai-cells = <0>;
|
|
|
|
pinctrl-0 = <&speaker_default>;
|
|
pinctrl-names = "default";
|
|
|
|
reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
|
|
|
|
vmon-slot-no = <1>;
|
|
imon-slot-no = <0>;
|
|
};
|
|
};
|