118 lines
4.2 KiB
YAML
118 lines
4.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ROHM BD71815 Power Management Integrated Circuit regulators
|
|
|
|
maintainers:
|
|
- Matti Vaittinen <mazziesaccount@gmail.com>
|
|
|
|
description: |
|
|
This module is part of the ROHM BD718215 MFD device. For more details
|
|
see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
|
|
|
|
The regulator controller is represented as a sub-node of the PMIC node
|
|
on the device tree.
|
|
|
|
The valid names for BD71815 regulator nodes are
|
|
buck1, buck2, buck3, buck4, buck5,
|
|
ldo1, ldo2, ldo3, ldo4, ldo5,
|
|
ldodvref, ldolpsr, wled
|
|
|
|
properties:
|
|
wled:
|
|
type: object
|
|
description:
|
|
properties for wled regulator
|
|
$ref: regulator.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
regulator-name:
|
|
const: wled
|
|
|
|
patternProperties:
|
|
"^((ldo|buck)[1-5]|ldolpsr|ldodvref)$":
|
|
type: object
|
|
description:
|
|
Properties for single LDO/BUCK regulator.
|
|
$ref: regulator.yaml#
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$"
|
|
description:
|
|
should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
|
|
for ldolpsr regulator, "ldodvref" for ldodvref reglator.
|
|
|
|
rohm,vsel-gpios:
|
|
description:
|
|
GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
|
|
|
|
rohm,dvs-run-voltage:
|
|
description:
|
|
PMIC "RUN" state voltage in uV when PMIC HW states are used. See
|
|
comments below for bucks/LDOs which support this. 0 means
|
|
regulator should be disabled at RUN state.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-snvs-voltage:
|
|
description:
|
|
Whether to keep regulator enabled at "SNVS" state or not.
|
|
0 means regulator should be disabled at SNVS state, non zero voltage
|
|
keeps regulator enabled. BD71815 does not change voltage level
|
|
when PMIC transitions to SNVS.SNVS voltage depends on the previous
|
|
state (from which the PMIC transitioned to SNVS).
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-suspend-voltage:
|
|
description:
|
|
PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
|
|
comments below for bucks/LDOs which support this. 0 means
|
|
regulator should be disabled at SUSPEND state.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
rohm,dvs-lpsr-voltage:
|
|
description:
|
|
PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
|
|
comments below for bucks/LDOs which support this. 0 means
|
|
regulator should be disabled at LPSR state.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 3300000
|
|
|
|
# Bucks 1 and 2 support giving separate voltages for operational states
|
|
# (RUN /CLEAN according to data-sheet) and non operational states
|
|
# (LPSR/SUSPEND). The voltage is automatically changed when HW
|
|
# state changes. Omitting these properties from bucks 1 and 2 leave
|
|
# buck voltages to not be toggled by HW state. Enable status may still
|
|
# be toggled by state changes depending on HW default settings.
|
|
#
|
|
# Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
|
|
# Given RUN voltage is used at all states if regulator is enabled at
|
|
# given state.
|
|
# Values given for other states are regarded as enable/disable at
|
|
# given state (see below).
|
|
#
|
|
# All regulators except WLED support specifying enable/disable status
|
|
# for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
|
|
# be overridden by setting voltage to 0 (regulator disabled at given
|
|
# state) or non-zero (regulator enabled at given state). Please note
|
|
# that setting non zero voltages for bucks 1/2 will also enable voltage
|
|
# changes according to state change.
|
|
|
|
required:
|
|
- regulator-name
|
|
|
|
unevaluatedProperties: false
|
|
|
|
additionalProperties: false
|