143 lines
3.4 KiB
YAML
143 lines
3.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: StarFive JH7110 SYS Pin Controller
|
|
|
|
description: |
|
|
Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
|
|
|
|
Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63
|
|
can be multiplexed and have configurable bias, drive strength,
|
|
schmitt trigger etc.
|
|
Some peripherals have their I/O go through the 64 "GPIOs". This also
|
|
includes a number of other UARTs, I2Cs, SPIs, PWMs etc.
|
|
All these peripherals are connected to all 64 GPIOs such that
|
|
any GPIO can be set up to be controlled by any of the peripherals.
|
|
|
|
maintainers:
|
|
- Jianlong Huang <jianlong.huang@starfivetech.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: starfive,jh7110-sys-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
|
|
patternProperties:
|
|
'-[0-9]+$':
|
|
type: object
|
|
additionalProperties: false
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
description: |
|
|
A pinctrl node should contain at least one subnode representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to
|
|
muxer configuration, bias, input enable/disable, input schmitt
|
|
trigger enable/disable, slew-rate and drive strength.
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/pincfg-node.yaml
|
|
- $ref: /schemas/pinctrl/pinmux-node.yaml
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
pinmux:
|
|
description: |
|
|
The list of GPIOs and their mux settings that properties in the
|
|
node apply to. This should be set using the GPIOMUX or PINMUX
|
|
macros.
|
|
|
|
bias-disable: true
|
|
|
|
bias-pull-up:
|
|
type: boolean
|
|
|
|
bias-pull-down:
|
|
type: boolean
|
|
|
|
drive-strength:
|
|
enum: [ 2, 4, 8, 12 ]
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
slew-rate:
|
|
maximum: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
pinctrl@13040000 {
|
|
compatible = "starfive,jh7110-sys-pinctrl";
|
|
reg = <0x13040000 0x10000>;
|
|
clocks = <&syscrg 112>;
|
|
resets = <&syscrg 2>;
|
|
interrupts = <86>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
uart0-0 {
|
|
tx-pins {
|
|
pinmux = <0xff140005>;
|
|
bias-disable;
|
|
drive-strength = <12>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
rx-pins {
|
|
pinmux = <0x0E000406>;
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|