129 lines
4.1 KiB
YAML
129 lines
4.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Renesas RZ/N1 Pin Controller
|
|
|
|
maintainers:
|
|
- Fabrizio Castro <fabrizio.castro.jz@renesas.com>
|
|
- Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- renesas,r9a06g032-pinctrl # RZ/N1D
|
|
- renesas,r9a06g033-pinctrl # RZ/N1S
|
|
- const: renesas,rzn1-pinctrl # Generic RZ/N1
|
|
|
|
reg:
|
|
items:
|
|
- description: GPIO Multiplexing Level1 Register Block
|
|
- description: GPIO Multiplexing Level2 Register Block
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: bus
|
|
description:
|
|
The bus clock, sometimes described as pclk, for register accesses.
|
|
|
|
allOf:
|
|
- $ref: pinctrl.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
|
|
additionalProperties:
|
|
anyOf:
|
|
- type: object
|
|
allOf:
|
|
- $ref: pincfg-node.yaml#
|
|
- $ref: pinmux-node.yaml#
|
|
|
|
description:
|
|
A pin multiplexing sub-node describes how to configure a set of (or a
|
|
single) pin in some desired alternate function mode.
|
|
A single sub-node may define several pin configurations.
|
|
|
|
properties:
|
|
pinmux:
|
|
description: |
|
|
Integer array representing pin number and pin multiplexing
|
|
configuration.
|
|
When a pin has to be configured in alternate function mode, use
|
|
this property to identify the pin by its global index, and provide
|
|
its alternate function configuration number along with it.
|
|
When multiple pins are required to be configured as part of the
|
|
same alternate function they shall be specified as members of the
|
|
same argument list of a single "pinmux" property.
|
|
Integers values in the "pinmux" argument list are assembled as:
|
|
(PIN | MUX_FUNC << 8)
|
|
where PIN directly corresponds to the pl_gpio pin number and
|
|
MUX_FUNC is one of the alternate function identifiers defined in:
|
|
<include/dt-bindings/pinctrl/rzn1-pinctrl.h>
|
|
These identifiers collapse the IO Multiplex Configuration Level 1
|
|
and Level 2 numbers that are detailed in the hardware reference
|
|
manual into a single number. The identifiers for Level 2 are simply
|
|
offset by 10. Additional identifiers are provided to specify the
|
|
MDIO source peripheral.
|
|
|
|
bias-disable: true
|
|
bias-pull-up:
|
|
description: Pull up the pin with 50 kOhm
|
|
bias-pull-down:
|
|
description: Pull down the pin with 50 kOhm
|
|
bias-high-impedance: true
|
|
drive-strength:
|
|
enum: [ 4, 6, 8, 12 ]
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
additionalProperties:
|
|
$ref: "#/additionalProperties/anyOf/0"
|
|
|
|
- type: object
|
|
additionalProperties:
|
|
$ref: "#/additionalProperties/anyOf/0"
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/r9a06g032-sysctrl.h>
|
|
#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
|
|
pinctrl: pinctrl@40067000 {
|
|
compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
|
|
reg = <0x40067000 0x1000>, <0x51000000 0x480>;
|
|
clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
|
|
clock-names = "bus";
|
|
|
|
/*
|
|
* A serial communication interface with a TX output pin and an RX
|
|
* input pin.
|
|
*/
|
|
pins_uart0: pins_uart0 {
|
|
pinmux = <
|
|
RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
|
|
RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
|
|
>;
|
|
};
|
|
|
|
/*
|
|
* Set the pull-up on the RXD pin of the UART.
|
|
*/
|
|
pins_uart0_alt: pins_uart0_alt {
|
|
pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
|
|
|
|
pins_uart6_rx {
|
|
pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|