187 lines
7.0 KiB
YAML
187 lines
7.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
# Copyright 2023 Realtek Semiconductor Corporation
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Realtek DHC RTD1619B Pin Controller
|
|
|
|
maintainers:
|
|
- TY Chang <tychang@realtek.com>
|
|
|
|
description:
|
|
The Realtek DHC RTD1619B is a high-definition media processor SoC. The
|
|
RTD1619B pin controller is used to control pin function, pull up/down
|
|
resistor, drive strength, schmitt trigger and power source.
|
|
|
|
properties:
|
|
compatible:
|
|
const: realtek,rtd1619b-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
allOf:
|
|
- $ref: pincfg-node.yaml#
|
|
- $ref: pinmux-node.yaml#
|
|
|
|
properties:
|
|
pins:
|
|
items:
|
|
enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7,
|
|
gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14,
|
|
gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21,
|
|
gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28,
|
|
gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35,
|
|
hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42,
|
|
gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49,
|
|
gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx,
|
|
gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63,
|
|
gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70,
|
|
gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd,
|
|
spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb,
|
|
emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3,
|
|
emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc,
|
|
gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en,
|
|
pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0,
|
|
pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1,
|
|
ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc,
|
|
iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ]
|
|
|
|
function:
|
|
enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0,
|
|
spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1,
|
|
gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2,
|
|
pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1,
|
|
pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1,
|
|
usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1,
|
|
ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable,
|
|
hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0,
|
|
vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1,
|
|
vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1,
|
|
aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2,
|
|
aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0,
|
|
scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2,
|
|
acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable,
|
|
aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
|
|
scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable,
|
|
arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain,
|
|
standby_dbg, test_loop_dis ]
|
|
|
|
drive-strength:
|
|
enum: [4, 8]
|
|
|
|
bias-pull-down: true
|
|
|
|
bias-pull-up: true
|
|
|
|
bias-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
drive-push-pull: true
|
|
|
|
power-source:
|
|
description: |
|
|
Valid arguments are described as below:
|
|
0: power supply of 1.8V
|
|
1: power supply of 3.3V
|
|
enum: [0, 1]
|
|
|
|
realtek,drive-strength-p:
|
|
description: |
|
|
Some of pins can be driven using the P-MOS and N-MOS transistor to
|
|
achieve finer adjustments. The block-diagram representation is as
|
|
follows:
|
|
VDD
|
|
|
|
|
||--+
|
|
+-----o|| P-MOS-FET
|
|
| ||--+
|
|
IN --+ +----- out
|
|
| ||--+
|
|
+------|| N-MOS-FET
|
|
||--+
|
|
|
|
|
GND
|
|
The driving strength of the P-MOS/N-MOS transistors impacts the
|
|
waveform's rise/fall times. Greater driving strength results in
|
|
shorter rise/fall times. Each P-MOS and N-MOS transistor offers
|
|
8 configurable levels (0 to 7), with higher values indicating
|
|
greater driving strength, contributing to achieving the desired
|
|
speed.
|
|
|
|
The realtek,drive-strength-p is used to control the driving strength
|
|
of the P-MOS output.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 7
|
|
|
|
realtek,drive-strength-n:
|
|
description: |
|
|
Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
|
|
is used to control the driving strength of the N-MOS output.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 7
|
|
|
|
realtek,duty-cycle:
|
|
description: |
|
|
An integer describing the level to adjust output duty cycle, controlling
|
|
the proportion of positive and negative waveforms in nanoseconds.
|
|
Valid arguments are described as below:
|
|
0: 0ns
|
|
2: + 0.25ns
|
|
3: + 0.5ns
|
|
4: -0.25ns
|
|
5: -0.5ns
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 0, 2, 3, 4, 5 ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
pinctrl@4e000 {
|
|
compatible = "realtek,rtd1619b-pinctrl";
|
|
reg = <0x4e000 0x130>;
|
|
|
|
emmc-hs200-pins {
|
|
pins = "emmc_clk",
|
|
"emmc_cmd",
|
|
"emmc_data_0",
|
|
"emmc_data_1",
|
|
"emmc_data_2",
|
|
"emmc_data_3",
|
|
"emmc_data_4",
|
|
"emmc_data_5",
|
|
"emmc_data_6",
|
|
"emmc_data_7";
|
|
function = "emmc";
|
|
realtek,drive-strength-p = <0x2>;
|
|
realtek,drive-strength-n = <0x2>;
|
|
};
|
|
|
|
i2c-0-pins {
|
|
pins = "gpio_12",
|
|
"gpio_13";
|
|
function = "i2c0";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|