174 lines
6.0 KiB
YAML
174 lines
6.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm SDM630 and SDM660 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,sdm630-pinctrl
|
|
- qcom,sdm660-pinctrl
|
|
|
|
reg:
|
|
maxItems: 3
|
|
|
|
reg-names:
|
|
items:
|
|
- const: south
|
|
- const: center
|
|
- const: north
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 57
|
|
|
|
gpio-line-names:
|
|
maxItems: 114
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sdm630-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-sdm630-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-sdm630-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
|
|
sdc2_cmd, sdc2_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
|
|
atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
|
|
atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
|
|
atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20,
|
|
atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0,
|
|
bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
|
|
blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b,
|
|
blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
|
|
blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a,
|
|
blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1,
|
|
blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
|
|
blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c,
|
|
cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1,
|
|
gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
|
|
isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
|
|
mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
|
|
nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
|
|
phase_flag1, phase_flag10, phase_flag11, phase_flag12,
|
|
phase_flag13, phase_flag14, phase_flag15, phase_flag16,
|
|
phase_flag17, phase_flag18, phase_flag19, phase_flag2,
|
|
phase_flag20, phase_flag21, phase_flag22, phase_flag23,
|
|
phase_flag24, phase_flag25, phase_flag26, phase_flag27,
|
|
phase_flag28, phase_flag29, phase_flag3, phase_flag30,
|
|
phase_flag31, phase_flag4, phase_flag5, phase_flag6,
|
|
phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset,
|
|
pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem,
|
|
pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b,
|
|
qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
|
|
qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
|
|
qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
|
|
qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk,
|
|
qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3,
|
|
qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu,
|
|
ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk,
|
|
uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
|
|
uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout,
|
|
vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
|
|
wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@3100000 {
|
|
compatible = "qcom,sdm630-pinctrl";
|
|
reg = <0x03100000 0x400000>,
|
|
<0x03500000 0x400000>,
|
|
<0x03900000 0x400000>;
|
|
reg-names = "south", "center", "north";
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&tlmm 0 0 114>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
blsp1-uart1-default-state {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
blsp2_uart1_default: blsp2-uart1-active-state {
|
|
tx-rts-pins {
|
|
pins = "gpio16", "gpio19";
|
|
function = "blsp_uart5";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
rx-pins {
|
|
pins = "gpio17";
|
|
function = "blsp_uart5";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
cts-pins {
|
|
pins = "gpio18";
|
|
function = "blsp_uart5";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|