151 lines
4.6 KiB
YAML
151 lines
4.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm MSM8960 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,msm8960-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 76
|
|
|
|
gpio-line-names:
|
|
maxItems: 152
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-msm8960-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-msm8960-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-msm8960-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd,
|
|
sdc3_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
|
|
codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
|
|
gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
|
|
gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b,
|
|
gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1,
|
|
gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
|
|
gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
|
|
gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
|
|
gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
|
|
gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11,
|
|
gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n,
|
|
gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec,
|
|
hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic,
|
|
mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold,
|
|
rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s,
|
|
ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts,
|
|
tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n,
|
|
usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a,
|
|
vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a,
|
|
vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b,
|
|
vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b,
|
|
vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c,
|
|
vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
|
|
wlan ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
msmgpio: pinctrl@800000 {
|
|
compatible = "qcom,msm8960-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&msmgpio 0 0 152>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
spi1-default-state {
|
|
mosi-pins {
|
|
pins = "gpio6";
|
|
function = "gsbi1";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
miso-pins {
|
|
pins = "gpio7";
|
|
function = "gsbi1";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
cs-pins {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
clk-pins {
|
|
pins = "gpio9";
|
|
function = "gsbi1";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|