137 lines
5.4 KiB
YAML
137 lines
5.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8953-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. MSM8953 TLMM block
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,msm8953-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
gpio-reserved-ranges: true
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-msm8953-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-msm8953-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-msm8953-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
|
|
sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0,
|
|
qdsd_data1, qdsd_data2, qdsd_data3 ]
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1,
|
|
atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
|
|
atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, atest_tsens,
|
|
atest_wlan0, atest_wlan1, bimc_dte0, bimc_dte1, blsp1_spi,
|
|
blsp3_spi, blsp6_spi, blsp7_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3,
|
|
blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1,
|
|
blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
|
|
blsp_spi8, blsp_uart2, blsp_uart4, blsp_uart5, blsp_uart6, cam0_ldo,
|
|
cam1_ldo, cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam3_rst,
|
|
cam3_standby, cam_irq, cam_mclk, cap_int, cci_async, cci_i2c,
|
|
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
|
|
cdc_pdm0, codec_int1, codec_int2, codec_reset, cri_trng, cri_trng0,
|
|
cri_trng1, dac_calib0, dac_calib1, dac_calib10, dac_calib11,
|
|
dac_calib12, dac_calib13, dac_calib14, dac_calib15, dac_calib16,
|
|
dac_calib17, dac_calib18, dac_calib19, dac_calib2, dac_calib20,
|
|
dac_calib21, dac_calib22, dac_calib23, dac_calib24, dac_calib25,
|
|
dac_calib3, dac_calib4, dac_calib5, dac_calib6, dac_calib7,
|
|
dac_calib8, dac_calib9, dbg_out, ddr_bist, dmic0_clk, dmic0_data,
|
|
ebi_cdc, ebi_ch0, ext_lpass, flash_strobe, fp_int, gcc_gp1_clk_a,
|
|
gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
|
|
gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, gsm0_tx, gsm1_tx,
|
|
gyro_int, hall_int, hdmi_int, key_focus, key_home, key_snapshot,
|
|
key_volp, ldo_en, ldo_update, lpass_slimbus, lpass_slimbus0,
|
|
lpass_slimbus1, m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync,
|
|
mss_lte, nav_pps, nav_pps_in_a, nav_pps_in_b, nav_tsync,
|
|
nfc_disable, nfc_dwl, nfc_irq, ois_sync, pa_indicator, pbs0, pbs1,
|
|
pbs2, pressure_int, pri_mi2s, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
|
|
pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
|
|
pwr_down, pwr_modem_enabled_a, pwr_modem_enabled_b,
|
|
pwr_nav_enabled_a, pwr_nav_enabled_b, qdss_cti_trig_in_a0,
|
|
qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
|
|
qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
|
|
qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
|
|
qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
|
|
qdss_tracedata_b, sd_write, sdcard_det, sec_mi2s, sec_mi2s_mclk_a,
|
|
sec_mi2s_mclk_b, smb_int, ss_switch, ssbi_wtr1, ts_resout,
|
|
ts_sample, ts_xvdd, tsens_max, uim1_clk, uim1_data, uim1_present,
|
|
uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
|
|
uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
|
|
wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,msm8953-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 142>;
|
|
|
|
serial_default: serial-state {
|
|
pins = "gpio4", "gpio5";
|
|
function = "blsp_uart2";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|