134 lines
4.7 KiB
YAML
134 lines
4.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/pinmux-node.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Generic Pin Multiplexing Node
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
description: |
|
|
The contents of the pin configuration child nodes are defined by the binding
|
|
for the individual pin controller device. The pin configuration nodes need not
|
|
be direct children of the pin controller device; they may be grandchildren,
|
|
for example. Whether this is legal, and whether there is any interaction
|
|
between the child and intermediate parent nodes, is again defined entirely by
|
|
the binding for the individual pin controller device.
|
|
|
|
While not required to be used, there are 3 generic forms of pin muxing nodes
|
|
which pin controller devices can use.
|
|
|
|
pin multiplexing nodes:
|
|
|
|
Example:
|
|
|
|
state_0_node_a {
|
|
uart0 {
|
|
function = "uart0";
|
|
groups = "u0rxtx", "u0rtscts";
|
|
};
|
|
};
|
|
state_1_node_a {
|
|
spi {
|
|
function = "spi0";
|
|
groups = "spi0pins";
|
|
};
|
|
};
|
|
state_2_node_a {
|
|
function = "i2c0";
|
|
pins = "mfio29", "mfio30";
|
|
};
|
|
|
|
Optionally an alternative binding can be used if more suitable depending on the
|
|
pin controller hardware. For hardware where there is a large number of identical
|
|
pin controller instances, naming each pin and function can easily become
|
|
unmaintainable. This is especially the case if the same controller is used for
|
|
different pins and functions depending on the SoC revision and packaging.
|
|
|
|
For cases like this, the pin controller driver may use pinctrl-pin-array helper
|
|
binding with a hardware based index and a number of pin configuration values:
|
|
|
|
pincontroller {
|
|
... /* Standard DT properties for the device itself elided */
|
|
#pinctrl-cells = <2>;
|
|
|
|
state_0_node_a {
|
|
pinctrl-pin-array = <
|
|
0 A_DELAY_PS(0) G_DELAY_PS(120)
|
|
4 A_DELAY_PS(0) G_DELAY_PS(360)
|
|
...
|
|
>;
|
|
};
|
|
...
|
|
};
|
|
|
|
Above #pinctrl-cells specifies the number of value cells in addition to the
|
|
index of the registers. This is similar to the interrupts-extended binding with
|
|
one exception. There is no need to specify the phandle for each entry as that
|
|
is already known as the defined pins are always children of the pin controller
|
|
node. Further having the phandle pointing to another pin controller would not
|
|
currently work as the pinctrl framework uses named modes to group pins for each
|
|
pin control device.
|
|
|
|
The index for pinctrl-pin-array must relate to the hardware for the pinctrl
|
|
registers, and must not be a virtual index of pin instances. The reason for
|
|
this is to avoid mapping of the index in the dts files and the pin controller
|
|
driver as it can change.
|
|
|
|
For hardware where pin multiplexing configurations have to be specified for
|
|
each single pin the number of required sub-nodes containing "pin" and
|
|
"function" properties can quickly escalate and become hard to write and
|
|
maintain.
|
|
|
|
For cases like this, the pin controller driver may use the pinmux helper
|
|
property, where the pin identifier is provided with mux configuration settings
|
|
in a pinmux group. A pinmux group consists of the pin identifier and mux
|
|
settings represented as a single integer or an array of integers.
|
|
|
|
The pinmux property accepts an array of pinmux groups, each of them describing
|
|
a single pin multiplexing configuration.
|
|
|
|
pincontroller {
|
|
state_0_node_a {
|
|
pinmux = <PINMUX_GROUP>, <PINMUX_GROUP>, ...;
|
|
};
|
|
};
|
|
|
|
Each individual pin controller driver bindings documentation shall specify
|
|
how pin IDs and pin multiplexing configuration are defined and assembled
|
|
together in a pinmux group.
|
|
|
|
properties:
|
|
function:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description: The mux function to select
|
|
|
|
pins:
|
|
oneOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
|
- $ref: /schemas/types.yaml#/definitions/string-array
|
|
description:
|
|
The list of pin identifiers that properties in the node apply to. The
|
|
specific binding for the hardware defines whether the entries are integers
|
|
or strings, and their meaning.
|
|
|
|
groups:
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
description:
|
|
the group to apply the properties to, if the driver supports
|
|
configuration of whole groups rather than individual pins (either
|
|
this, "pins" or "pinmux" has to be specified)
|
|
|
|
pinmux:
|
|
description:
|
|
The list of numeric pin ids and their mux settings that properties in the
|
|
node apply to (either this, "pins" or "groups" have to be specified)
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
pinctrl-pin-array:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
additionalProperties: true
|